5628 Commits

Author	SHA1	Message	Date
Scott Lahteine	7b2fadd598	Apply some fixes from Andreas ... Derived from https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56 7f8d8e0dd	2016-06-22 17:35:59 -07:00
Scott Lahteine	bd01592816	Goodbye MECHANICAL_PROBE	2016-06-22 17:13:33 -07:00
Scott Lahteine	2640d13a9f	Simplify initial raise in M48	2016-06-22 16:53:04 -07:00
Scott Lahteine	3763d45656	Return Z position in run_z_probe	2016-06-22 16:52:32 -07:00
Scott Lahteine	1f48b5c30f	Pass a raise to probe_pt, not a Z position	2016-06-22 16:40:21 -07:00
Scott Lahteine	6fdd5ba246	Save and restore feedrate in more places	2016-06-22 16:40:20 -07:00
Scott Lahteine	fe173c2bc6	Generalized probe raise, use for after probing	2016-06-22 14:44:30 -07:00
Scott Lahteine	7da3080761	Simpler cleanup in G28 / G29	2016-06-22 14:44:30 -07:00
Scott Lahteine	15229d988b	Fix compile error for bed matrix in M48	2016-06-22 14:04:46 -07:00
Scott Lahteine	c01352cbd5	Add a dependency for z servo macros	2016-06-22 14:04:23 -07:00
Scott Lahteine	c3794bd695	Add HAS_PROBING_PROCEDURE conditional	2016-06-22 14:03:22 -07:00
Scott Lahteine	42ce60c5cc	Make sure NUM_SERVOS is set for Z servo endstop	2016-06-22 14:01:19 -07:00
Scott Lahteine	b590a7dee0	Make Z_RAISE_BETWEEN_PROBINGS a more general option	2016-06-22 14:00:44 -07:00
Scott Lahteine	bb9c67b4b5	Tweak some feedrate vars	2016-06-22 03:27:31 -07:00
Scott Lahteine	5158bd6e93	Screen out G29 E for sled and allen key, allow single probe	2016-06-22 03:20:33 -07:00
Scott Lahteine	ccae92588d	Cleanup debug in G28 and G29	2016-06-22 03:20:33 -07:00
Scott Lahteine	b4a9d2366c	Use a macro for kinematic sync_plan_position	2016-06-22 03:20:33 -07:00
Scott Lahteine	bfccf26294	Use sync_plan_position_delta where needed	2016-06-22 03:20:33 -07:00
Scott Lahteine	a6b8c67df4	Move probe deploy after setup call in G29	2016-06-22 03:20:33 -07:00
Scott Lahteine	e69916d1bd	Split up endstop_move functions	2016-06-22 03:20:33 -07:00
Scott Lahteine	0e18a4897b	Simpler handling of sled/allen-key in probe_pt	2016-06-22 03:20:33 -07:00
Scott Lahteine	1a92e2ef18	Comment on run_z_probe	2016-06-22 03:20:33 -07:00
Scott Lahteine	68e0e5855e	For all probes, at the end of G29 simply raise and stow	2016-06-22 03:20:33 -07:00
Scott Lahteine	c3023f8cc5	Make M401/M402 available with HAS_BED_PROBE	2016-06-22 03:20:33 -07:00
Scott Lahteine	9f0c255c69	Show uncorrected position in set_bed_level_equation_3pts	2016-06-22 03:20:33 -07:00
Scott Lahteine	07298ac992	Initialize current_position to home_offset on boot	2016-06-22 03:20:33 -07:00
Scott Lahteine	d50539583a	Make XY_PROBE_SPEED a general probe option	2016-06-22 03:04:47 -07:00
Scott Lahteine	2798499b71	XY_TRAVEL_SPEED => XY_PROBE_SPEED	2016-06-22 02:45:25 -07:00
Scott Lahteine	88dc543584	Add a macro for XY_TRAVEL_FEEDRATE	2016-06-22 02:23:50 -07:00
Scott Lahteine	117db77c55	make motor_current_setting static and constexpr	2016-06-21 19:50:08 -07:00
João Brázio	19fb04d761	Update bq Hephestos 2 config	2016-06-21 18:15:51 -07:00
Scott Lahteine	b0e47608e6	Merge pull request #4108 from esenapaj/Fix-for-PR-#4093 ... Fix for PR #4093 (Make Z Probe options independent of ABL), etc	2016-06-21 18:12:08 -07:00
Scott Lahteine	c84732e605	Merge pull request #4111 from esenapaj/Cosmetic-changes-and-small-fix-for-thermistortables.h ... Cosmetic changes and small fix for thermistortables.h	2016-06-21 18:05:32 -07:00
Scott Lahteine	cdc661ea5e	Merge pull request #4110 from esenapaj/Small-cosmetic-changes-for-language-files ... Small cosmetic changes for language files	2016-06-21 18:04:12 -07:00
Scott Lahteine	c8186e9423	Merge pull request #4109 from esenapaj/Enclose-#error-string-by-double-quotes ... Enclose #error string by double-quotes	2016-06-21 18:03:30 -07:00
Scott Lahteine	40cd20a236	Fix comments on EXPERIMENTAL_I2CBUS	2016-06-21 17:58:44 -07:00
esenapaj	385945ca31	Cosmetic changes and small fix for thermistortables.h ... ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array	2016-06-21 21:19:47 +09:00
esenapaj	fac58f0291	Cosmetic changes for language files	2016-06-21 21:13:25 +09:00
esenapaj	14b661b9e5	Enclose #error string by double-quotes	2016-06-21 21:06:14 +09:00
esenapaj	d583ea852d	Standardize format description of Panel	2016-06-21 20:51:27 +09:00
esenapaj	aa6d35bd49	Move code block of probe to appropriate position	2016-06-21 20:36:46 +09:00
esenapaj	740fb2ce39	Adjust spacing	2016-06-21 19:37:45 +09:00
esenapaj	f77f3ffa70	Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX	2016-06-21 19:33:45 +09:00
Scott Lahteine	19fe93a5a9	Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST	2016-06-21 03:10:46 -07:00
Scott Lahteine	71a7408012	Merge pull request #4106 from thinkyhead/rc_temp_compile_err ... Fix compile error with watch_bed_next_ms	2016-06-21 02:48:46 -07:00
Scott Lahteine	dcb8ec32ee	Fix compile error with watch_bed_next_ms	2016-06-21 02:13:41 -07:00
Scott Lahteine	3996242e9d	Allow Z_MIN_PROBE_REPEATABILITY_TEST solo	2016-06-21 01:56:40 -07:00
Scott Lahteine	26a9cd0b08	Move run_z_probe to earlier block	2016-06-21 01:25:23 -07:00
Scott Lahteine	7f8a2025af	Move raise_z_after_probing into earlier block	2016-06-21 01:03:40 -07:00
Scott Lahteine	2530371516	Always disable probe at the end of G29	2016-06-20 16:40:44 -07:00
Scott Lahteine	6aba98e470	Comment on setup_for_endstop_move	2016-06-20 16:40:44 -07:00
Scott Lahteine	04e88d008e	Clear up ordering in G30	2016-06-20 16:40:44 -07:00
Scott Lahteine	ed75b0ea11	Make clean_up function available for probes	2016-06-20 16:28:45 -07:00
Scott Lahteine	51d52cb52a	Make run_z_probe available for any bed probe	2016-06-20 16:02:36 -07:00
Scott Lahteine	f6b09cf465	Always use deploy/stow for dock_sled	2016-06-20 15:51:01 -07:00
Scott Lahteine	3b457c2dd3	Use deploy/stow with FIX_MOUNTED_PROBE too	2016-06-20 15:25:01 -07:00
Scott Lahteine	7e9d4a68d4	Always raise Z (if needed) for servo deploy/stow	2016-06-19 20:17:13 -07:00
Scott Lahteine	9beb3f2f5e	Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup ... FIL_RUNOUT_INVERTING false by default	2016-06-19 19:46:14 -07:00
Scott Lahteine	f215b30932	Merge pull request #4093 from thinkyhead/rc_probe_without_abl ... Make Z Probe options independent of ABL	2016-06-19 19:44:25 -07:00
Scott Lahteine	2fd2301928	FILRUNOUT => FIL_RUNOUT	2016-06-19 19:25:26 -07:00
Scott Lahteine	dfbf8b3c2c	FIL_RUNOUT_INVERTING false by default	2016-06-19 19:25:26 -07:00
Scott Lahteine	7b5cd314a5	Merge pull request #4095 from thinkyhead/rc_fil_runout_cleanup ... Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN	2016-06-19 18:48:18 -07:00
Scott Lahteine	de12228758	Make Z Probe options independent of ABL	2016-06-19 18:47:27 -07:00
Scott Lahteine	add0032820	Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN	2016-06-19 18:13:33 -07:00
Scott Lahteine	f8c278ce4d	Cartesio UI display option in all configs	2016-06-19 17:39:46 -07:00
Scott Lahteine	400e13d136	Output a message for SD read errors	2016-06-19 17:14:56 -07:00
Roxy-3D	96b8bcca84	Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks ... Cleanup of M48	2016-06-18 22:21:16 -05:00
Scott Lahteine	b7e3c1bbc4	Tweak M48 output conditions	2016-06-18 16:17:53 -07:00
Scott Lahteine	1dad912b03	Adjust M48 raise / move handling	2016-06-18 15:38:24 -07:00
Scott Lahteine	46d3ef2223	Simplify sample_set probe_pt call in M48	2016-06-18 15:38:23 -07:00
Scott Lahteine	a647b05f82	Shrink some debug code in G28	2016-06-18 15:38:23 -07:00
Scott Lahteine	4edf813bde	Just-in-time declaration style in M48	2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya	c475291e19	Fix M851 ... Minor change missing in the process of standardize the gcode M851	2016-06-18 15:19:07 -07:00
Scott Lahteine	e35583888c	Merge pull request #4082 from esenapaj/Follow-up-the-PR-#4065 ... Follow-up the PR #4065 (Remove support for XY servo endstops)	2016-06-18 03:31:12 -07:00
Scott Lahteine	6dff52d920	Merge pull request #4078 from RicardoGA/Language_Spanish ... Update Spanish Language	2016-06-18 03:28:46 -07:00
esenapaj	d55b94d606	Follow-up the PR #4065 (Remove support for XY servo endstops) ... ・Update a forgotten Configuration.h of Cartesio	2016-06-18 18:01:58 +09:00
Scott Lahteine	4e860babbc	Allow setting xy_travel_speed for delta leveling also	2016-06-18 01:40:49 -07:00
Scott Lahteine	d36d4edd80	Tweak partial homing code	2016-06-18 01:16:50 -07:00
Scott Lahteine	d3a05de96e	Save and restore feedrate in probe functions	2016-06-18 01:16:26 -07:00
Juan Ricardo Gomez Anaya	5991eb428f	Update Spanish Language ... Spanish language update and also add missing messages	2016-06-18 00:27:04 -05:00
Scott Lahteine	f33bd0bb10	Merge pull request #4077 from thinkyhead/rc_delete_old_macros ... Delete some obsolete Z servo macros	2016-06-17 18:59:16 -07:00
Scott Lahteine	defcacc1a9	Delete some obsolete Z servo macros	2016-06-17 18:49:17 -07:00
Scott Lahteine	bbf5b486c3	Add an SD Card stop function, use in ultralcd	2016-06-17 18:27:14 -07:00
Scott Lahteine	3a150f07c2	Merge pull request #4073 from thinkyhead/rc_temp_mystery ... Minor tweaks to M109 / M190	2016-06-17 17:49:50 -07:00
Scott Lahteine	bd4ec727e7	Merge pull request #4066 from thinkyhead/rc_M851_with_probe ... Make M851 standard with a bed probe	2016-06-17 17:32:55 -07:00
Scott Lahteine	692a6e7c91	Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos ... Remove support for XY servo endstops	2016-06-17 17:32:08 -07:00
Scott Lahteine	de177ba6c9	Minor tweaks to M109 / M190	2016-06-17 17:26:21 -07:00
Scott Lahteine	eab44b30d4	Safety and serial sections	2016-06-17 15:19:43 -07:00
Scott Lahteine	fc56a547d1	Rename movement section to motion	2016-06-17 15:19:43 -07:00
Scott Lahteine	a8b8796cd7	Define probe offsets when a probe exists	2016-06-17 15:19:42 -07:00
Scott Lahteine	1000563d80	Make M851 standard with a bed probe	2016-06-17 15:19:42 -07:00
Scott Lahteine	f66a194159	Merge pull request #4062 from jbrazio/bugfix/compiler-warnings ... Fixes misc gcc warnings	2016-06-17 14:23:28 -07:00
Scott Lahteine	1bed392c68	HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP	2016-06-17 14:20:17 -07:00
Scott Lahteine	47ce810f52	Remove support for XY servo endstops	2016-06-17 14:19:17 -07:00
João Brázio	d1e5dc6319	Fixes misc gcc warnings	2016-06-17 20:24:24 +01:00
esenapaj	c5eecb11b2	Follow-up the PR #4055 (Croatian language support) ... ・Update a forgotten Configuration.h of Cartesio	2016-06-17 21:20:15 +09:00
Scott Lahteine	d991a4c24a	Merge pull request #4063 from thinkyhead/rc_remove_swp_files ... Delete mysterious .swp files from #3609	2016-06-16 17:22:48 -07:00
Scott Lahteine	8d8cbef1de	Merge pull request #4055 from thinkyhead/rc_croatian_language ... Croatian language support	2016-06-16 17:22:25 -07:00
Scott Lahteine	ebbed2975e	Delete mysterious .swp files from #3609	2016-06-16 16:42:03 -07:00
Scott Lahteine	02e5dad29a	Include Croatian in language listings	2016-06-16 16:18:26 -07:00
Scott Lahteine	2015aad867	Tweak Croatian language file heading	2016-06-16 16:09:57 -07:00
Robert Marko	884bc63fbe	Add Croatian language	2016-06-16 16:09:57 -07:00
Scott Lahteine	ef3bef6b9e	Fix feedrate in gcode_T (max_feedrate is mm/s)	2016-06-16 16:03:14 -07:00
Scott Lahteine	4640974e1b	Merge pull request #4060 from esenapaj/Follow-up-the-PR-#4053 ... Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)	2016-06-16 15:44:00 -07:00
esenapaj	106227540e	Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support) ... ・Add implimantation of PR #3609 to configuration files of Cartesio ・Standardize macro names	2016-06-16 19:22:31 +09:00
MagoKimbra	008d0637dd	Fix gcode_T	2016-06-16 09:05:36 +02:00
edwilliams16	114d9db7d0	Show babysteps on the LCD in mm, not steps	2016-06-15 23:03:24 -07:00
Scott Lahteine	b410bf933b	Merge pull request #4053 from thinkyhead/rc_cartesio_redo ... CNControls Cartesio UI Support	2016-06-15 22:33:45 -07:00
Scott Lahteine	f639044c24	Merge pull request #3609 from jbrazio/feature/config-version ... Adds versioning for Configuration.h & Configuration_adv.h	2016-06-15 22:09:47 -07:00
Scott Lahteine	4d2cb70152	Cartesio UI Support	2016-06-15 21:46:54 -07:00
Scott Lahteine	da90bbe0eb	Merge pull request #4010 from thinkyhead/rc_toolchange_adjust ... Fixup position adjustment on toolchange	2016-06-15 21:10:33 -07:00
Scott Lahteine	948c467e16	Merge pull request #4043 from AnHardt/save_delay ... Introduce save_delay()	2016-06-15 21:06:43 -07:00
Scott Lahteine	4b93989a77	MBL Z adjustment on toolchange	2016-06-15 20:49:36 -07:00
Scott Lahteine	9c800d1f8c	Position adjustment for bed leveling	2016-06-15 20:49:36 -07:00
Scott Lahteine	8c7babb70f	Merge pull request #4049 from esenapaj/Fix-for-the-PR-#4023 ... Fix for the PR #4023(Add macros to move servos)	2016-06-15 20:39:46 -07:00
AnHardt	1219310622	Introduce save_delay() ... Introduce save_delay() for long delays what otherwise would cause watchdog resets Explizit lcd_set_custom_characters(false) at the end of bootscreen(). Else the charset is not proper set in case of LCD_PROGRESS_BAR.	2016-06-15 18:11:55 +02:00
esenapaj	44f091a413	Fix for the PR #4023(Add macros to move servos) ... ・Add missing ')'	2016-06-15 22:34:55 +09:00
Alexander Leisentritt	c2b7ef1e7e	"e" was renamed to "eindex" in a previous commit	2016-06-15 11:11:16 +02:00
Scott Lahteine	52ac2a62ee	Merge pull request #4013 from thinkyhead/rc_toolchange_no_move ... Use "Tn S1" to change tools without moving	2016-06-14 20:13:01 -07:00
Scott Lahteine	d2a00b74e3	Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T ... Use linear feedrate in gcode_T, not volumetric	2016-06-14 20:10:08 -07:00
Scott Lahteine	0ad26d0de8	Merge pull request #4034 from AnHardt/custom-splash-screen ... Custom Splash Screen	2016-06-14 18:51:39 -07:00
esenapaj	741cda0e47	Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE) ... ・Update forgotten example configurations	2016-06-15 00:10:15 +09:00
AnHardt	02b3d6b8d3	Custom Splash Screen ... Custom Splash Screen for full graphic displays. Too complicated for the hitachis without knowing what exactly to display. On top of #4032 Realisation of an idea from #3996	2016-06-14 09:39:28 +02:00
Scott Lahteine	78a48d7e3c	Merge pull request #4038 from thinkyhead/rc_fix_heater_off ... Fix broken DISABLE_HEATER macro	2016-06-13 20:58:34 -07:00
Scott Lahteine	ee5be92206	Fix broken DISABLE_HEATER macro	2016-06-13 20:57:58 -07:00
Scott Lahteine	8d8180e028	Parse M905 args in Marlin_main.cpp	2016-06-13 19:25:28 -07:00
Scott Lahteine	2b340f5acb	patch LIN_ADVANCE to use code_value_float	2016-06-13 18:54:25 -07:00
Scott Lahteine	b708196770	Merge pull request #4032 from AnHardt/bootscreen-delay ... Show bootscreen later	2016-06-13 18:27:05 -07:00
Scott Lahteine	587de1b6b6	Merge pull request #3676 from thinkyhead/rc_lin_advance_feature ... Advance extrusion algorithm – LIN_ADVANCE	2016-06-13 18:04:58 -07:00
AnHardt	b4fedec0d1	Show bootscreen later ... Init display and show bootscreen later, but init display in `kill()` to init outputs before the bootscreen delays but being able to display kill errors.	2016-06-14 01:59:50 +02:00
Silvio Didonna	08e2c5a6ea	Added and translated some strings from language_en	2016-06-13 13:04:09 +02:00
Scott Lahteine	4d2119f83a	_lcd_move => _lcd_move_xyz	2016-06-12 17:14:19 -07:00
Scott Lahteine	811967923a	Fix manual_move to move the correct E stepper	2016-06-12 17:14:19 -07:00
Scott Lahteine	0d0b751498	Merge pull request #4023 from thinkyhead/rc_servo_macros ... Add macros to move servos	2016-06-12 15:45:39 -07:00
Scott Lahteine	4fbe818163	Add macros to move servos	2016-06-12 15:38:30 -07:00
Scott Lahteine	b322ac4417	No need to check ULTIPANEL with DOGLCD	2016-06-11 16:50:06 -07:00
João Brázio	8ccd97e7cc	Updated all example configuration files	2016-06-12 00:36:15 +01:00
Scott Lahteine	c7eeb09e8f	Merge pull request #4012 from Blue-Marlin/watchdoghealing ... Heal the watchdog	2016-06-11 16:18:22 -07:00
Scott Lahteine	7fb69e24fb	Use "Tn S1" to change tools without moving	2016-06-11 15:58:45 -07:00
Scott Lahteine	2f1bf8373b	Merge pull request #4005 from thinkyhead/rc_prepare_move_destination ... Clarify names of prepare_move functions	2016-06-11 15:51:58 -07:00
João Brázio	de8108648f	Added a versioning system to the config files	2016-06-11 23:48:10 +01:00
Blue-Marlin	efe719f898	Heal the watchgog	2016-06-12 00:34:31 +02:00
Scott Lahteine	b75e648f2c	Clarify names of prepare_move functions	2016-06-11 15:32:49 -07:00
Scott Lahteine	ae9b09fe94	menu => screen	2016-06-11 14:53:39 -07:00
Scott Lahteine	45ea8749d3	Wrap all items depending on ULTIPANEL	2016-06-11 14:27:34 -07:00
Scott Lahteine	0e2bfd0769	Use linear feedrate in gcode_T, not volumetric	2016-06-10 18:27:01 -07:00
Scott Lahteine	bf8710d522	Merge pull request #4001 from Blue-Marlin/manage_manual_move-ULTIPANEL ... manage_manual_move(); -> ULTIPANEL	2016-06-10 17:17:57 -07:00
João Brázio	2c34ec2bac	Closes #3999: Compilation error with BEEPER_PIN -1	2016-06-11 00:12:49 +01:00
Blue-Marlin	378ff92e98	manage_manual_move(); -> ULTIPANEL ... Makr the call of `manage_manual_move() ` depandent of `ULTIPANEL`	2016-06-10 23:36:57 +02:00
Scott Lahteine	aad9c0ed8d	Apply updated ISR timing code	2016-06-09 21:03:27 -07:00
Scott Lahteine	506d78b2f8	Run the advance_isr faster instead of doing multiple e-steps per interrupt	2016-06-09 21:03:27 -07:00
Scott Lahteine	6d62a4ffc8	Patch LIN_ADVANCE for style and forward-compatibility	2016-06-09 21:03:27 -07:00
Sebastianv650	fb8e880734	Add LIN_ADVANCE	2016-06-09 21:03:27 -07:00
Scott Lahteine	e2d4919c01	Merge pull request #3991 from thinkyhead/rc_axis_units ... Rename some vars to clarify their relationship to acceleration	2016-06-09 20:57:01 -07:00
Scott Lahteine	74060f17b7	Merge pull request #3995 from thinkyhead/rc_nonblocking_buzzer ... New feature: Non blocking tone queue	2016-06-09 20:55:29 -07:00
Scott Lahteine	a82c755a35	Fix BQ_LCD_SMART_CONTROLLER pin compiler warnings	2016-06-09 20:38:23 -07:00
João Brázio	5b5aa1572b	Non-blocking buzzer	2016-06-09 20:20:05 -07:00
Scott Lahteine	72c6f2923f	axis_steps_per_unit => axis_steps_per_mm	2016-06-09 17:04:51 -07:00
Scott Lahteine	446515ab79	Adjust spacing in block_t	2016-06-09 17:04:51 -07:00
Scott Lahteine	80ab749563	Rename acceleration locals for clarity	2016-06-09 17:04:51 -07:00
Scott Lahteine	3b08eb1eeb	acceleration_st => acceleration_steps_per_s2	2016-06-09 17:04:51 -07:00
Scott Lahteine	cb4704e07a	Rename some planner acceleration vars ... - `per_sq_second` => `per_s2` - `per_sqr_second` => `per_s2` - `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`	2016-06-09 17:04:50 -07:00
Scott Lahteine	3c68be79dc	Throw an error in PID_autotune for E < -1	2016-06-09 16:41:53 -07:00
Scott Lahteine	26f8f54c56	Merge pull request #3985 from thinkyhead/rc_inch_fahrenheit_kelvin ... Support inches, fahrenheit, and kelvin	2016-06-08 20:10:33 -07:00
Scott Lahteine	f0a5b7f0bc	Merge pull request #3986 from thinkyhead/rc_mbl_forward_iteration ... Use memset in mbl.reset to save 58 bytes	2016-06-08 17:33:41 -07:00
Scott Lahteine	0b3142b45b	Remove redundant declarations from M100 code	2016-06-08 17:09:34 -07:00
Scott Lahteine	4980ecc1f7	Smaller binary using inline gcode argument getters	2016-06-08 17:03:28 -07:00
Reid Rankin	16212432c9	G20/21 and M149 support, and code_value() refactor ... This is an update of MarlinDev PR #196. G20/21: support for switching input units between millimeters and inches. M149: support for changing input temperature units. In support of these changes, code_value() and code_value_short() are replaced with an array of functions which handle converting to the proper types and/or units.	2016-06-08 16:51:10 -07:00
Scott Lahteine	a569e89775	Merge pull request #3978 from thinkyhead/rc_planner_local_rename ... Rename some auto/locals to avoid name conflict	2016-06-08 16:41:57 -07:00
Scott Lahteine	2d55862499	Use memset in mbl.reset to save 58 bytes	2016-06-08 16:05:18 -07:00
Scott Lahteine	b23f710034	Cleanup and naming for num-to-string functions	2016-06-08 13:12:27 -07:00
Scott Lahteine	3d56b9d127	Merge pull request #3979 from thinkyhead/mbl_cell ... MBL: cel => cell	2016-06-07 19:12:46 -07:00
Scott Lahteine	cca047424d	MBL: cel => cell	2016-06-07 19:10:39 -07:00
Scott Lahteine	49ecaf774d	Rename some auto/locals to avoid name conflict	2016-06-07 15:38:45 -07:00
petrzjunior	9171a3d94f	Update Czech language 2016/06/07	2016-06-07 19:25:15 +02:00
Scott Lahteine	5e6fdbb4cb	Merge pull request #3963 from thinkyhead/rc_advance_steppers ... Use e_steps[EXTRUDERS] instead of e_steps[4]	2016-06-05 02:46:06 -07:00
Scott Lahteine	47b5c55c29	Implement the delayed-move technique	2016-06-05 02:29:49 -07:00
Scott Lahteine	a3e25a0fca	Instead of trying to move now, set a flag to move asap	2016-06-05 02:29:48 -07:00
Scott Lahteine	e2a8961635	Use e_steps[EXTRUDERS] instead of e_steps[4]	2016-06-05 01:44:53 -07:00
Scott Lahteine	43947072d5	Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2 ... SINGLENOZZLE: EXTRUDERS versus HOTENDS	2016-06-04 15:23:17 -07:00
Scott Lahteine	d7e4e8e9be	Fix a typo in #3955	2016-06-04 02:09:58 -07:00
Scott Lahteine	c2362c1b3c	Apply Marlin coding standards to MBL class	2016-06-03 21:43:32 -07:00
Edward Patel	c06de0f097	MBL: Added keeping MBL active when homing single axises for #3750	2016-06-03 21:42:29 -07:00
Scott Lahteine	f2fb66c00d	With SINGLENOZZLE only set temperature for the active tool	2016-06-03 17:38:03 -07:00
Scott Lahteine	cd441ce652	SINGLENOZZLE: EXTRUDERS versus HOTENDS	2016-06-03 17:38:03 -07:00
Scott Lahteine	32f8300cc6	Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast ... Improved LCD contrast handling	2016-06-03 17:08:41 -07:00
Scott Lahteine	9c87bf835c	Merge pull request #3947 from thinkyhead/rc_statics_stepper ... Apply static to remaining Stepper methods	2016-06-03 17:08:15 -07:00
Scott Lahteine	08871d4d6e	Merge pull request #3950 from boelle/patch-3 ... last of missing defines added	2016-06-03 17:07:02 -07:00
Scott Lahteine	4e13cd3f35	Merge pull request #3955 from MagoKimbra/RCBugFix ... Fix M428 width DELTA & SCARA	2016-06-03 15:50:37 -07:00
Scott Lahteine	2403a1cf9c	Merge pull request #3952 from rafacouto/RCBugFix ... Galician language update.	2016-06-03 15:46:03 -07:00
Scott Lahteine	8529122af1	Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow ... Raise the servo probe before stow outside ABL context	2016-06-03 15:45:36 -07:00
MagoKimbra	f499be084a	Fix M428 width DELTA & SCARA	2016-06-03 23:23:23 +02:00
Rafa Couto	5f8db3f574	Galician language update.	2016-06-03 18:24:53 +02:00
Bo Herrmannsen	8532bf4087	last of missing defines added ... need to check line 101-103	2016-06-03 11:20:46 +02:00
Scott Lahteine	81384dfd36	Apply static to remaining stepper methods	2016-06-02 18:00:31 -07:00
Scott Lahteine	664b299a51	This fix is not DELTA compatible	2016-06-02 17:16:19 -07:00
Scott Lahteine	064efb20e0	Also call clear_command_queue for lcd_sdcard_stop	2016-06-02 17:16:19 -07:00
Scott Lahteine	6277395e1e	set_current_position_from_planner() after stepper.quick_stop()	2016-06-02 17:16:19 -07:00
Scott Lahteine	381bc6f0b0	set_position => set_position_mm	2016-06-02 17:16:19 -07:00
Scott Lahteine	663d2463dc	Merge pull request #3922 from thinkyhead/rc_statics_stepper ... Apply static to Stepper class	2016-06-02 17:14:24 -07:00
Scott Lahteine	194185539d	Merge pull request #3925 from thinkyhead/rc_statics_planner ... Apply static to Planner class	2016-06-02 17:14:04 -07:00
Scott Lahteine	3fd9b331f0	Merge pull request #3924 from thinkyhead/rc_statics_temperature ... Apply static to Temperature class	2016-06-02 17:13:17 -07:00
Scott Lahteine	db0fd021d0	Z raise options independent of ABL so G28 can use them	2016-06-02 16:56:49 -07:00
Scott Lahteine	9eecb4404b	Make raise_z_after_probing null sometimes	2016-06-02 16:56:49 -07:00
Scott Lahteine	28fb1f8994	Tweak #endif comment for ABL GRID	2016-06-02 16:56:49 -07:00
Scott Lahteine	b3a37b493d	Patch G28 servo stow to use Conditionals, raise_z_after_probing	2016-06-02 16:56:49 -07:00
Scott Lahteine	5390c846a5	Positive conditions for HAS_LCD_CONTRAST	2016-06-02 16:17:34 -07:00
Scott Lahteine	efa7209acf	Improved LCD contrast handling ... Based on MarlinFirmware/MarlinDev#200 from @eboston	2016-06-02 16:17:34 -07:00
Scott Lahteine	b703fa9538	Add sanity check for SAV_3DGLCD display types	2016-06-02 15:21:17 -07:00
lrpirlet	3aefa04386	Raise the servo probe before stow outside ABL context	2016-06-01 21:53:45 +02:00
Scott Lahteine	9729e9c450	Combine ST7565 / U8GLIB_NHD_C12864 items in dogm	2016-06-01 01:42:14 -07:00
Scott Lahteine	f331763eca	Merge pull request #3829 from thinkyhead/rc_fix_T_command ... Fix bad movement in gcode_T when switching extruders	2016-05-31 19:36:18 -07:00
Scott Lahteine	67f816ff79	Merge pull request #3926 from thinkyhead/rc_statics_endstops ... Drop FORCE_INLINE from endstops.h	2016-05-31 19:35:41 -07:00
Scott Lahteine	2bd4f33369	Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup ... Remove excess allen key probe examples from configs	2016-05-31 19:18:21 -07:00
Scott Lahteine	d698c89971	Fix bad movement in gcode_T when switching	2016-05-31 19:14:33 -07:00
Scott Lahteine	1a01a44a94	Merge pull request #3936 from thinkyhead/rc_sav_mk1 ... Support for SAV_3DGLCD OLED LCD controller	2016-05-31 18:46:25 -07:00
Scott Lahteine	4770d7c346	Merge pull request #3933 from boelle/patch-2 ... added defines present in en but not in da	2016-05-31 18:42:38 -07:00
Scott Lahteine	c6c01eaaac	Merge pull request #3888 from thinkyhead/rc_slower_max31855 ... Slower SPI speed for MAX31855	2016-05-31 18:40:38 -07:00
Scott Lahteine	a0b000d752	Support for SAV_3DGLCD OLED LCD controller	2016-05-31 14:41:16 -07:00
Scott Lahteine	bd97bbc52a	Make HAS_LCD_CONTRAST a boolean flag	2016-05-31 11:47:02 -07:00
Scott Lahteine	bc77670673	Merge pull request #3929 from thinkyhead/rc_fix_printrboard_dac ... Need to call dac_init() in setup() for DAC_STEPPER_CURRENT	2016-05-31 10:29:37 -07:00
Bo Herrmannsen	a1a8240606	added defines present in en but not in da	2016-05-31 14:57:52 +02:00
Bo Herrmannsen	5eb7a79d93	initial changes to DA	2016-05-31 14:24:33 +02:00
Scott Lahteine	55ef04a566	Need to call dac_init() in setup() for DAC_STEPPER_CURRENT ... As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488	2016-05-30 23:35:06 -07:00
Scott Lahteine	43a71ef226	Remove excess allen key probe examples from configs	2016-05-30 18:26:53 -07:00
Scott Lahteine	1582ed43bf	Merge pull request #3918 from epatel/marlin/mbl_negative_xy_adv ... MBL: Move border macros to Configuration_adv.h	2016-05-30 18:15:50 -07:00
Scott Lahteine	ff53819856	Drop FORCE_INLINE in planner.h ... This change actually does increase the binary size by about 12 bytes, but how does it affect performance?	2016-05-30 17:18:28 -07:00
Scott Lahteine	e60224a943	Drop FORCE_INLINE from endstops.h ... `FORCE_INLINE` seems to have no effect with standard optimization.	2016-05-30 17:08:56 -07:00
Scott Lahteine	85512e9372	Drop FORCE_INLINE from temperature.h ... `FORCE_INLINE` seems to have no effect on code generation with standard optimization.	2016-05-30 17:06:50 -07:00
Scott Lahteine	78fb02a5ad	Apply static to Temperature class	2016-05-30 16:50:51 -07:00
Scott Lahteine	c3df293fc6	Merge pull request #3923 from thinkyhead/rc_statics_endstops ... Apply static to Endstops class	2016-05-30 16:48:23 -07:00
Scott Lahteine	02735fd500	Merge pull request #3921 from thinkyhead/rc_calc_timer_tweak ... Tiny calc_timer speedup	2016-05-30 16:47:03 -07:00
Scott Lahteine	668d50f68e	Keep Stepper encapsulation, use static data and methods	2016-05-30 16:24:04 -07:00
Scott Lahteine	26f866b908	Apply static to Endstops class	2016-05-30 16:23:43 -07:00
Scott Lahteine	470d5ac09f	Apply static to Planner class	2016-05-30 16:22:41 -07:00
Scott Lahteine	ecfdcf7250	Tiny calc_timer speedup	2016-05-30 16:17:02 -07:00
Edward Patel	06593833ff	MBL: Move border macros to Configuration_adv.h	2016-05-30 20:50:16 +02:00
Scott Lahteine	ffe55c230d	Merge pull request #3914 from thinkyhead/rc_fix_lcd_contrast ... Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL	2016-05-30 11:20:14 -07:00
Scott Lahteine	d3efc96289	Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL ... - `DEFAULT_LCD_CONTRAST` was incorrectly overriding all `DOGLCD` - `MINIPANEL` conditionals are identical to `MAKRPANEL`	2016-05-30 01:10:47 -07:00
Edward Patel	92a27c37b3	MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations	2016-05-30 09:50:11 +02:00
Scott Lahteine	3861f1e0da	Merge pull request #3908 from jbrazio/bugfix/3826 ... Closes #3826: SD printing will now pause and stop the print counter	2016-05-30 00:08:57 -07:00
Scott Lahteine	8806c7bbcc	Merge pull request #3903 from epatel/marlin/mbl_negative_xy ... MBL: Fix for negative x/y positions	2016-05-29 22:07:35 -07:00
Scott Lahteine	dc22097b3a	Fix some of array initializations ... - In `stepper.h` init `count_direction` array - In `ultralcd.cpp` init `autotune_temp` array	2016-05-29 20:55:13 -07:00
João Brázio	40e64b36de	Closes #3826: SD printing will now pause and stop the print counter ... The LCD menu items for SD printing pause/stop have been updated to control also the print job timer. This commit also fixes a small output bug with M78, the failed print counter was displaying the wrong value.	2016-05-30 00:56:39 +01:00
Edward Patel	eb2746a34f	MBL: Fix for negative x/y positions	2016-05-28 21:05:43 +02:00
Scott Lahteine	fe3122774a	Merge pull request #3806 from thinkyhead/rc_coreyz_support ... Support for COREYZ. Fixes for COREXY, COREXZ	2016-05-26 18:50:43 -07:00
Scott Lahteine	fad7680605	Slower SPI speed for MAX31855	2016-05-25 18:15:36 -07:00
Scott Lahteine	30f6b84561	Merge pull request #3812 from thinkyhead/rc_mbl_index_finders ... Two index finding functions for MBL	2016-05-23 15:54:37 -07:00
Scott Lahteine	89e630b2fb	Merge pull request #3808 from thinkyhead/rc_singlenozzle ... SINGLENOZZLE	2016-05-23 15:52:19 -07:00
Scott Lahteine	827738a790	set_z parameters marked const	2016-05-23 14:25:43 -07:00
Scott Lahteine	9049f4084b	EEPROM report uses G29 S3	2016-05-23 14:25:43 -07:00
Scott Lahteine	4955163959	Propose simpler probe index methods	2016-05-23 14:25:43 -07:00
Scott Lahteine	a1a5cb5393	Propose simpler cel index methods	2016-05-23 14:25:42 -07:00
Scott Lahteine	360adc6a3b	Small reduction in M421 code	2016-05-23 14:25:42 -07:00
Scott Lahteine	a4ed988c60	Two index finding functions for MBL	2016-05-23 14:25:42 -07:00
Scott Lahteine	0e55c06f7d	Rename CORE_AXIS_3 to NORMAL_AXIS	2016-05-23 13:58:40 -07:00
Scott Lahteine	5172d4ba40	COREYZ stepper, planner, endstop, babysteps	2016-05-23 13:58:40 -07:00
Scott Lahteine	6c7f4909b1	COREYZ Conditionals, SanityCheck for only a single kinematic	2016-05-23 13:58:40 -07:00
Scott Lahteine	95fee8ca81	Add option for CoreYZ kinematics	2016-05-23 13:58:40 -07:00
Scott Lahteine	678cbad76a	Merge pull request #3819 from jbrazio/bugfix/followup-3813 ... Followup for #3813	2016-05-23 13:56:11 -07:00
AnHardt	bb66ffb2ae	Correct hardware endstops default ... All credits to RicardoGA	2016-05-23 10:54:22 +02:00
João Brázio	75221fa673	Followup for #3813	2016-05-22 13:14:58 +01:00
Scott Lahteine	f9b4b90058	Merge pull request #3813 from jbrazio/bugfix/3809 ... Stopwatch and PrintCounter improvements	2016-05-21 18:33:57 -07:00
João Brázio	8c0edb2de4	Fixes #3809 and adds several improvements to the Stopwatch and ... PrintCounter classes	2016-05-22 01:59:59 +01:00
Scott Lahteine	c5130fd23b	Additional instructions for controller reverse options	2016-05-20 18:14:50 -07:00
Scott Lahteine	cadf441059	Merge pull request #3798 from AnHardt/extend-M421 ... Extend M421 with I and J parameters	2016-05-20 16:17:23 -07:00
Scott Lahteine	0c7c45063b	PID_ADD_EXTRUSION_RATE based on MarlinKimbra	2016-05-20 16:15:05 -07:00
Scott Lahteine	92ac133f2b	Conditionals and Sanity Check for SINGLENOZZLE	2016-05-20 15:48:27 -07:00
Scott Lahteine	69abfef82e	Add "SINGLENOZZLE" extruder option	2016-05-20 15:45:11 -07:00
AnHardt	f5a036510f	Extend M421 with I and J parameters ... Extend M421 with I and J parameters	2016-05-21 00:18:09 +02:00
Scott Lahteine	2f6e7b7b9b	Merge pull request #3805 from MatixYo/patch-7 ... Update language_pl.h to the latest strings	2016-05-20 14:50:49 -07:00
Scott Lahteine	1a6c72cb57	Apply to the rest of the configs	2016-05-20 11:52:27 -07:00
Scott Lahteine	37c6d0f4ed	Reword MESH_G28_REST_ORIGIN comment	2016-05-20 11:52:27 -07:00
Edward Patel	c7d90dc5ec	Add option to configure G28 all axis resting position for MBL	2016-05-20 11:52:27 -07:00
Mateusz Juszczyk	bbe4c20ef6	Update language_pl.h	2016-05-20 13:24:34 +02:00
Scott Lahteine	319d184999	Merge pull request #3803 from jbrazio/feature/buildroot-cleanup ... Buildroot cleanup	2016-05-19 21:34:11 -07:00
Scott Lahteine	a469341555	Merge pull request #3800 from jbrazio/feature/move-felix-cfg ... Moves Felix's dual configuration to a folder	2016-05-19 18:53:39 -07:00
João Brázio	14652bb141	Moves shared helper scripts to the buildroot	2016-05-20 02:25:13 +01:00
João Brázio	80f05920c5	Moves Felix's dual configuration to a folder	2016-05-20 00:49:16 +01:00
Scott Lahteine	8218558953	Update comments, rename next_ping_ms, followup to #3797	2016-05-19 16:44:57 -07:00
Scott Lahteine	6d68b12e28	Merge pull request #3797 from AnHardt/fix-screen-updatedelay ... Rework intermediate idle() and manage_heater() calls in G2/G3 and G5	2016-05-19 16:29:27 -07:00
AnHardt	e761bdbb4b	Remove SF_ARC_FIX from G5 (Cubic B-spline) ... Remove SF_ARC_FIX from G5 (Cubic B-spline). SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc. It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.	2016-05-19 21:00:12 +02:00
AnHardt	2207001333	No compromises for the manage_heater() ... No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper. Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough. For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.	2016-05-19 20:52:11 +02:00
AnHardt	0c4d885d5b	Speedup sreen update delay ... Speedup sreen update delay and correct a comment. A module division by 10 is slooooow. (powers of 2 are fast - but then you can AND a bitmask with the same result)	2016-05-19 15:41:09 +02:00
Rafa Couto	9d416289cc	Update Galician language to 1.1.0-RCBugFix.	2016-05-19 19:33:40 +09:00
Scott Lahteine	07c9a11c3c	Automatically set X2 stepper pins	2016-05-18 19:09:09 -07:00
Scott Lahteine	8aa591ca09	Merge pull request #3789 from jbrazio/feature/m999-s-arg ... Implements S1 argument in M999	2016-05-18 16:58:09 -07:00
Scott Lahteine	138c5c8378	Merge pull request #3788 from thinkyhead/rc_dual_x_compile_fix ... DUAL_X_CARRIAGE fixes, improvements, Travis test	2016-05-18 16:56:54 -07:00
João Brázio	e6effb8f35	Implements S1 argument in M999	2016-05-19 00:13:33 +01:00
Scott Lahteine	2a7b1a85f7	Improve DUAL_X_CARRIAGE sanity check errors	2016-05-18 15:59:28 -07:00
Scott Lahteine	516e79bbda	Declare extruder_duplication_enabled in Marlin.h	2016-05-18 15:51:44 -07:00
esenapaj	56d5ae596c	Update Japanese trasration ... ・Add new translation ・Change translation	2016-05-18 20:42:50 +09:00
Scott Lahteine	4041508ffb	Function decl. in headers don't need "extern"	2016-05-17 18:35:01 -07:00
Scott Lahteine	82c2d308dc	Merge pull request #3783 from thinkyhead/rc_bezier_delta_fix ... Bezier style and DELTA patch	2016-05-17 18:27:48 -07:00
Scott Lahteine	ecec5c5e58	Bezier style and DELTA patch	2016-05-17 18:06:10 -07:00
Scott Lahteine	d66e53c42b	Merge pull request #3782 from thinkyhead/rc_home_z_before_g29 ... Require homing of Z before G29	2016-05-17 17:53:56 -07:00
Scott Lahteine	552516ddf5	Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup ... Minor DELTA segmentation speedup	2016-05-17 17:17:38 -07:00
Scott Lahteine	a28970784c	XYZ unhomed	2016-05-17 17:02:53 -07:00
Scott Lahteine	a9926b71a4	Require homing of Z before G29	2016-05-17 16:57:12 -07:00
AnHardt	41e9569dbc	Minor DELTA segmentation speedup ... Minor DELTA segmentation speedup by pulling calculations out of the loop.	2016-05-18 01:49:30 +02:00
Scott Lahteine	3016dfe484	Merge pull request #3744 from thinkyhead/rc_bezier_curves ... Add BEZIER_CURVE_SUPPORT — G5 command	2016-05-17 13:57:38 -07:00
Scott Lahteine	d0ac4541d3	Merge pull request #3775 from jbrazio/bugfix/followup-3770 ... G29: Report final position back to host when using MBL	2016-05-17 13:55:26 -07:00
João Brázio	b6a3aef297	G29: Report final position back to host when using MBL	2016-05-17 01:27:59 +01:00
esenapaj	95f30529a6	Add stowing process for MECHANICAL_PROBE	2016-05-16 18:12:10 +09:00
esenapaj	e2b87f6c85	Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE	2016-05-16 18:12:10 +09:00
Scott Lahteine	58339aea5f	Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior ... Bugfix: iteration invokes undefined behavior	2016-05-15 20:36:25 -07:00
Scott Lahteine	26b4cb5b42	Merge pull request #3771 from thinkyhead/rc_auto_fans_again ... Fix checkExtruderAutoFans	2016-05-15 20:32:31 -07:00
Scott Lahteine	c9271e610b	Merge pull request #3762 from jbrazio/bugfix/lcd-hide-bed-icon ... Remove the hotbed icon from the status screen	2016-05-15 19:11:05 -07:00
Scott Lahteine	2f14934c65	Fix checkExtruderAutoFans ... Make sure to only set the fan state once when extruders share a fan	2016-05-15 18:54:37 -07:00
João Brázio	ecd490ed49	Bugfix: iteration invokes undefined behavior	2016-05-15 22:45:08 +01:00
Scott Lahteine	abdfd914f8	Merge pull request #3763 from esenapaj/patch-4 ... Follow-up for #3720 and #3759	2016-05-15 12:37:51 -07:00
Scott Lahteine	754b0152f5	Fix MBL zigzag calls	2016-05-15 12:35:01 -07:00
esenapaj	6d722716f7	Follow-up the PR #3720 and #3759 ... Update forgotten Configuration_DUAL.h	2016-05-15 14:08:45 +09:00
João Brázio	451000387d	Remove the hotbed icon when HAS_TEMP_BED is false	2016-05-15 03:00:05 +01:00
Scott Lahteine	a058226799	Prevent watchdog timeout in bezier moves	2016-05-14 17:41:16 -07:00
Scott Lahteine	13175ce7da	Fix error checking in M421	2016-05-14 17:12:44 -07:00
Scott Lahteine	bc5a547d55	More robust MBL index / point conversion	2016-05-14 16:45:56 -07:00
Scott Lahteine	a3520b6f01	More precision in M503 output for MBL's M421	2016-05-14 16:19:37 -07:00
Scott Lahteine	1b90682617	Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins ... Remove need to define unused pins as -1 in pins files	2016-05-14 15:49:22 -07:00
Scott Lahteine	c8a40f06a6	Merge pull request #3759 from thinkyhead/rc_more_printcounter ... Printcounter bugfix and some new features	2016-05-14 15:36:31 -07:00
Scott Lahteine	585c8a918f	Merge pull request #3758 from thinkyhead/rc_verbiage ... Tweaks to some verbiage	2016-05-14 15:27:11 -07:00
João Brázio	f9a62f6a8e	Added PRINTJOB_TIMER_AUTOSTART section to example config files	2016-05-14 15:22:45 -07:00
João Brázio	8a18c52002	Adds an option to disable print job timer auto start	2016-05-14 15:22:44 -07:00
João Brázio	a79267217b	M78 now allows stats reset using the S78 argument	2016-05-14 15:22:44 -07:00
João Brázio	b660f1bdb8	Bugfix: Multiple M77 no longer increment the print counter	2016-05-14 15:22:43 -07:00
Scott Lahteine	c63f95f2fe	Merge pull request #3748 from clexpert/patch-1 ... Lastest changes in Czech translate	2016-05-14 15:12:39 -07:00
Scott Lahteine	e01e52969e	Merge pull request #3757 from thinkyhead/rc_fix_auto_fans ... Don't try to enable unused auto fans	2016-05-14 15:09:24 -07:00
Scott Lahteine	ddf3e1e22d	Tweaks to some verbiage	2016-05-14 15:06:09 -07:00
Scott Lahteine	a713043acd	Merge pull request #3749 from esenapaj/patch-3 ... Enclose all #error strings by double-quotes	2016-05-14 15:01:56 -07:00
Scott Lahteine	3cfea3ff12	Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE ... G29 missing FIX_MOUNTED_PROBE condition	2016-05-14 15:00:42 -07:00
Scott Lahteine	08dfe08f9a	Merge pull request #3754 from jbrazio/feature/update-pt_PT ... Updated pt_PT language pack	2016-05-14 15:00:12 -07:00
Scott Lahteine	596ebccd54	Merge pull request #3753 from jbrazio/feature/followup-3740 ... Warn user about useless of individual axis homing and DELTA kinematics	2016-05-14 14:59:49 -07:00
Scott Lahteine	6e3556cb75	Merge pull request #3746 from esenapaj/patch-2 ... Update Japanese translation	2016-05-14 14:57:43 -07:00
Scott Lahteine	ddac17a195	Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)	2016-05-14 14:52:08 -07:00
Scott Lahteine	b4c891dfd2	Remove obsolete reference to prepare_arc_move	2016-05-14 14:51:09 -07:00
Scott Lahteine	9f6b8f7d5b	Remove extra @section directive from configs	2016-05-14 14:51:09 -07:00
Scott Lahteine	4d6bb52b26	Don't try to enable unused auto fans ... Addressing #3743	2016-05-14 14:46:14 -07:00
Scott Lahteine	f13c4a9ec4	Merge pull request #3720 from jbrazio/feature/host-keepalive ... Removes the DISABLE from HOST_KEEPALIVE	2016-05-14 14:39:31 -07:00
João Brázio	596f15348d	Updated pt_PT language pack	2016-05-14 01:45:15 +01:00
João Brázio	d7522152e1	Warn user about useless of individual axis homing and DELTA kinematics	2016-05-14 01:35:05 +01:00
AnHardt	8a4376d51f	Idle during long arcs ... Idle during long arcs to prevent from watchdog resets during high segmented fast arcs.	2016-05-14 00:29:13 +02:00
esenapaj	888443ca1e	Enclose all #error strings with apostrophes	2016-05-13 21:10:23 +09:00
Petr Zahradnik	50b1a6bb2b	Lastest changes in Czech translate	2016-05-13 13:51:13 +02:00
AnHardt	b74af78736	Make arc support (G2/G3) configurable ... Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)	2016-05-13 13:27:45 +02:00
AnHardt	aef2559bd8	fix-FIX_MOUNTED_PROBE ... Add a forgotten condition	2016-05-13 12:07:17 +02:00
esenapaj	e9d851137d	Update Japanese translation ... ・Add new translation	2016-05-13 18:52:35 +09:00
Scott Lahteine	14cd0f4c92	Merge pull request #3740 from thinkyhead/rc_lcd_home_options ... Individual Axis Homing LCD menu items	2016-05-12 11:59:46 -07:00
esenapaj	69511b5e5e	Follow-up the PR #3719(Harmonize LCD comment section) ... It update forgotten Configuration_DUAL.h.	2016-05-12 19:16:36 +09:00
Scott Lahteine	675e92ab1f	Merge pull request #3738 from thinkyhead/rc_limit_i2c_request ... Print an error on bad i2c request	2016-05-11 19:36:49 -07:00
João Brázio	09150cae79	Individual Axis Homing LCD menu items	2016-05-11 19:28:19 -07:00
Scott Lahteine	4dc4e2063f	Add REVERSE_ENCODER_DIRECTION option	2016-05-11 15:39:28 -07:00
Scott Lahteine	aaeadf0cbd	If no "B" parameter given, get 1 byte	2016-05-11 15:30:08 -07:00
Scott Lahteine	a6d594665b	Print an error on bad i2c request ... Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678	2016-05-11 15:30:02 -07:00
João Brázio	85b2c80838	Updated example configurations	2016-05-11 01:45:49 +01:00
João Brázio	ac7f634956	Removed the DISABLE from HOST_KEEPALIVE_FEATURE option	2016-05-11 01:45:49 +01:00
Scott Lahteine	a454a88f9c	Merge pull request #3722 from jbrazio/bugfix/printcounter ... Minor #warning fix for PrintCounter	2016-05-10 17:17:04 -07:00
Scott Lahteine	03bda5c141	Merge pull request #3719 from jbrazio/feature/update-configs ... Harmonize LCD comment section	2016-05-10 17:16:23 -07:00
Scott Lahteine	c827671299	Mention Z_PROBE_ALLEN_KEY in probe sanity checks	2016-05-10 13:50:20 -07:00
Scott Lahteine	be5d17de17	Merge pull request #3713 from thinkyhead/rc_file_offset_long ... Use code_value_long for potentially large values	2016-05-10 09:15:53 -07:00
Scott Lahteine	56dd31ea3c	Use code_value_long for potentially large values ... Addressing #3711	2016-05-10 09:15:31 -07:00
João Brázio	eafa16a781	Minor #warning fix for PrintCounter	2016-05-10 14:14:54 +01:00
João Brázio	5373ac6373	Updated example configurations	2016-05-10 13:42:00 +01:00
João Brázio	aa5a4716cf	Update default config	2016-05-10 13:37:21 +01:00
esenapaj	1a75509a3c	Cleanup for Danish file ... ・Arrange the strings in unified order ・Remove "#ifdef DELTA_CALIBRATION_MENU" directive ・Adjust spacing	2016-05-10 02:43:25 +09:00
esenapaj	cf6c607425	Update Japanese translation ... ・Add new translation ・Add translation for 16 width ASCII LCD ・Change translation ・Revert translation from Japanese to English ・Fix typo	2016-05-10 02:43:24 +09:00
Scott Lahteine	6f36b7c1cd	Merge pull request #3224 from yarda/fix-melzi2-arduino-1.6.x ... Fixed Makefile to work with Melzi2 boards on arduino-1.6.x	2016-05-08 19:33:37 -07:00
Scott Lahteine	050e0bd2af	Merge pull request #3705 from thinkyhead/rc_runaway_logic ... Fallthru in thermal runaway test when TRState changes	2016-05-08 19:00:24 -07:00
Scott Lahteine	5f7ad16b19	Merge pull request #3707 from thinkyhead/rc_fix_delta_blocking_move ... Fix dipping on DELTA robots during G29	2016-05-08 18:42:57 -07:00
Scott Lahteine	96b71e62c0	Fix dipping on DELTA robots during G29 ... - Addressing #3689, et. al.	2016-05-08 18:28:46 -07:00
Scott Lahteine	ea1dd31851	Enclose #error strings with apostrophes in quotes	2016-05-08 18:08:39 -07:00
Scott Lahteine	9b92bb8f31	Set the initial state based on target temperature	2016-05-08 17:25:44 -07:00
Scott Lahteine	6b13c430ae	The TRReset state is not needed with fall-through	2016-05-08 17:01:46 -07:00
Scott Lahteine	c2522ce1f5	Fallthru in thermal runaway test when TRState changes	2016-05-08 16:51:33 -07:00
Scott Lahteine	d32d9a3c5c	Merge pull request #3672 from thinkyhead/rc_consolidate_probe_flags ... Cleanup and consolidate probe conditionals for clarity	2016-05-08 16:42:22 -07:00
Scott Lahteine	15fc93d742	Cleanup and consolidate probe conditionals for clarity	2016-05-08 12:59:43 -07:00
Scott Lahteine	5ca6334fd2	Cleanup pins files, fixup analogtodigitalpin, etc.	2016-05-08 12:38:00 -07:00
esenapaj	9186be7b83	Fix compilation error in debugging code ... Fix compilation error in Thermal Runaway debugging code	2016-05-09 01:57:21 +09:00
Scott Lahteine	51109d4af7	Use AxisEnum with _lcd_babystep()	2016-05-05 21:04:30 -07:00
Scott Lahteine	b65ea98d6b	Localize babystepping in the Temperature class ... So that `ultralcd.cpp` doesn’t need to worry about the details.	2016-05-05 15:00:31 -07:00
Scott Lahteine	0c7beb832c	Merge pull request #3681 from esenapaj/patch-1 ... Follow-up the PR #3643(Temperature singleton)	2016-05-05 12:47:06 -07:00
Scott Lahteine	fc5fe2cc22	Merge pull request #3678 from jbrazio/rework/delta-diagonal-rod-timmers ... Moved DELTA radius/rod default trimmer values to Conditionals.h	2016-05-05 11:38:14 -07:00
esenapaj	1a97442d19	Follow-up the PR #3643(Temperature singleton) ... Follow-up the PR #3643(Temperature singleton) ・Change from fanSpeedSoftPwm[0] to thermalManager.fanSpeedSoftPwm[0] in planner.cpp It fix compilation error when FAN_SOFT_PWM is enabled. ・Remove declaration of setExtruderAutoFanState() in temperature.h Because that function was abolished. ・Change from babystepsTodo to thermalManager.babystepsTodo in ultralcd.cpp It fix compilation errors when BABYSTEPPING is enabled.	2016-05-05 18:01:39 +09:00
Scott Lahteine	4f6120f70f	Merge pull request #3643 from thinkyhead/rc_singletons_plus_temperature ... Temperature singleton	2016-05-04 20:41:46 -07:00
Scott Lahteine	084f6b5b44	Temperature singleton class	2016-05-04 19:42:12 -07:00
Scott Lahteine	142bd3f3e7	Disable THERMAL_PROTECTION_BED with no sensor	2016-05-04 19:36:51 -07:00
Scott Lahteine	13f85a2b50	Can't use the ENABLED macro as a boolean	2016-05-04 16:33:57 -07:00
João Brázio	23567a1d8b	Moved DELTA radius/rod default trimmer values to Conditionals.h	2016-05-05 00:18:32 +01:00
Scott Lahteine	b4b5c7a6b7	Merge pull request #3670 from thinkyhead/rc_scoovo_controller ... Use directional buttons when defined	2016-05-03 17:42:18 -07:00
Scott Lahteine	6398d497b3	Ultimate followup to Stepper/Planner patch ... - Search all symbols and apply prefixes where needed - Encapsulate some private methods - Inline some setters - Make `microstep_mode` a public method	2016-05-03 17:07:37 -07:00
Scott Lahteine	ddafb859e2	Use directional buttons when defined	2016-05-03 12:50:49 -07:00
Scott Lahteine	b959020532	Merge pull request #3667 from esenapaj/patch-1 ... Additional follow-up the PR #3631(Encapsulate S...	2016-05-03 09:36:09 -07:00
esenapaj	212b17d510	Fix for PR #3526(Configuration.h LCD & SDCard s... ... Fix for PR #3526(Configuration.h LCD & SDCard section rewrite) It removes duplicated BQ_LCD_SMART_CONTROLLER.	2016-05-03 21:35:02 +09:00
esenapaj	605808fe37	Additional follow-up the PR #3631(Encapsulate S... ... Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes) ・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp ・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters()) It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled. ・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp ・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp It fix compilation errors when HAS_DIGIPOTSS is enabled. ・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp ・Change attribute of microstep_mode() from private to public in stepper.h ・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp ・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main. It fix compilation errors when HAS_MICROSTEPS is enabled.	2016-05-03 18:28:37 +09:00
Scott Lahteine	7fd0243048	Cleanup, debug strings in Planner::adjusted_position	2016-05-02 20:11:27 -07:00
Scott Lahteine	85e732d5fd	Fix BABYSTEPPING, add it to Travis test	2016-05-02 20:01:00 -07:00
Scott Lahteine	37c4970d87	Merge pull request #3660 from esenapaj/patch-2 ... Follow-up the PR #3631(Encapsulate Stepper, ...	2016-05-02 15:23:38 -07:00
Scott Lahteine	ad27d3c523	Merge pull request #3659 from esenapaj/patch-1 ... Some clean-up for example configuration files	2016-05-02 15:22:29 -07:00
Scott Lahteine	f1c1a8dc59	Merge pull request #3661 from Blue-Marlin/83filen2 ... 8.3-filenames second try	2016-05-02 14:47:26 -07:00
Jochen Groppe	0bae00c1ed	Merge pull request #3644 from tkurbad/german_translation ... Revisited German translation	2016-05-02 16:46:19 +02:00
Blue-Marlin	5ad7d263e9	8.3-filenames second try ... Fix for #6 3593, #3648 this time excludung 'DEL' instead of accidently '~'.	2016-05-02 15:58:04 +02:00
Torsten Kurbad	aae2f502e0	Revisited German translation	2016-05-02 15:18:12 +02:00
esenapaj	a82cfcff2d	Follow-up the PR #3631(Encapsulate Stepper, ... ... Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes) plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp It probably fix the Issue #3658(plan_bed_level_matrix not declarate). movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp It fix compilation error when ADVANCED_OK is enabled	2016-05-02 22:04:26 +09:00
esenapaj	2fa4bc344c	Some clean-up for example configuration files ... Some clean-up for example configuration files Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional): ・Update forgotten file(Felix/Configuration_DUAL.h) Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite): ・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h Follow-up the PR #3576(Z Safe Homing for all): ・Adjust spacing Follow-up and fix the PR #3625(Print job statistics): ・Update forgotten file(Felix/Configuration_DUAL.h) ・Remove ambiguous character "f" in top of RigidBot/Configuration.h	2016-05-02 21:16:00 +09:00
Scott Lahteine	da47b83b3d	Revert PR 3648 to fix SD printing ... The character 0x7E is common in 8.3 filenames. Maybe the last condition should be removed completely instead.	2016-05-01 18:04:04 -07:00
Scott Lahteine	60c6efb75c	Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge ... Introduce temp watch protection for the bed	2016-05-01 13:58:28 -07:00
Scott Lahteine	5b7a6c217a	Include more fans in sensitive pins list	2016-05-01 13:49:32 -07:00
Scott Lahteine	f508c54c6c	Use #undef in AZTEEG_X3_PRO for RAMPS overrides	2016-05-01 13:49:32 -07:00
Scott Lahteine	c6f1337f5c	NOOP macro for do-nothing macros	2016-05-01 13:49:32 -07:00
Scott Lahteine	c2145566c7	Merge pull request #3631 from thinkyhead/rc_singletons ... Encapsulate Stepper, Planner, Endstops in singleton classes	2016-05-01 13:47:47 -07:00
Scott Lahteine	fbf69081b4	Updated comment for THERMAL_PROTECTION_BED	2016-05-01 13:12:51 -07:00
gralco	908229dbb3	Introduce temp watch protection for the bed ... When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function. Conflicts: Marlin/Configuration_adv.h	2016-05-01 13:12:51 -07:00
Scott Lahteine	77d6e5283b	Merge pull request #3648 from Blue-Marlin/83filenames ... Don't reject 8.3-filenames with chars > 0x7f	2016-04-30 17:48:03 -07:00
Scott Lahteine	24a15332b3	Encapsulate dual Z endstop handling	2016-04-30 17:26:50 -07:00
Scott Lahteine	462a8a951e	A little extra gcode_T spacing	2016-04-30 17:26:50 -07:00
Scott Lahteine	96f51f400f	Planner singleton class	2016-04-30 17:26:50 -07:00
Scott Lahteine	5076d12344	Localize M119 in Endstops class	2016-04-30 17:26:50 -07:00
Scott Lahteine	5e4e535ce8	Stepper and Endstops as singleton objects	2016-04-30 17:26:50 -07:00
Scott Lahteine	6d3e4e1f8f	Prevent stuck M109/M190 when target is changed	2016-04-30 17:03:54 -07:00
Blue-Marlin	ac4caab8f1	Don't mangel 8.3-filenames with chars > 0x7f ... Don't mangel 8.3-filenames with chars > 0x7f Windows produces 8.3filenames wit chars > 0x7f. Those have been rejected by Marlin until now. With these 'malformed' filenames can now be worked with: In the LCD menue With RepetierHost (V1.6.1 tested) - full support. Characters are displayed as '?' With Octoprint (1.2.10 tested) the files do not appear in the files area. At the console, listed with M20 they appear with a '�'. With Pronterface the files appear in the sd-window but you can't start them. They are mangled by pronterface. The names are altered and than recected by Marlin. In the console they apper with differen but not the correct characters. All in all a little step forward. Fix for #3593	2016-04-30 17:37:22 +02:00
Scott Lahteine	eeef571be2	Merge pull request #3613 from thinkyhead/rc_acceleration_fix1 ... Fix an acceleration anomaly by making locals signed	2016-04-29 16:39:31 -07:00
Scott Lahteine	c3ef9993b9	Merge pull request #3625 from jbrazio/feature/print-counter ... Print job statistics	2016-04-29 15:31:14 -07:00
Scott Lahteine	96b2b3f4fe	Merge pull request #3642 from thinkyhead/rc_quieter_wait_for_temps ... Keepalive not needed while waiting for temperatures	2016-04-29 15:20:12 -07:00
João Brázio	e34f4653ef	Fixed a typo on the configuration files	2016-04-29 23:13:59 +01:00
João Brázio	1491d682fb	Miscellaneous tweaks on PrintCounter	2016-04-29 23:13:59 +01:00
João Brázio	27088e356f	Updated example configuration files	2016-04-29 23:13:59 +01:00
João Brázio	8fb23e899f	PrintCounter EEPROM read/write optimizations	2016-04-29 23:13:59 +01:00
João Brázio	9589e51810	Disable DEBUG_PRINTCOUNTER	2016-04-29 23:13:59 +01:00
João Brázio	e2da7e5000	Updated the default configuration and fixed a printcounter.h typo	2016-04-29 23:13:58 +01:00
João Brázio	d6cfcc9c8b	Added new G-Code: M78	2016-04-29 23:13:58 +01:00
João Brázio	4f541c5bb5	Added a new object: PrintCounter	2016-04-29 23:13:58 +01:00
João Brázio	26b166d7cf	Made all stopwatch::debug() calls static	2016-04-29 23:13:58 +01:00
Scott Lahteine	5897b58a70	Merge pull request #3634 from esenapaj/patch-2 ... Update distribution date and readme again	2016-04-28 21:19:08 -07:00
Scott Lahteine	f4706bb90e	Keepalive not needed while waiting for temperatures	2016-04-28 21:11:15 -07:00
Scott Lahteine	924285afa6	Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc ... Correct the REVERSE_MENU_DIRECTION comment	2016-04-28 20:28:46 -07:00
Scott Lahteine	f1b00eb12b	Correct the REVERSE_MENU_DIRECTION comment	2016-04-28 20:27:17 -07:00
Scott Lahteine	8905908081	Merge pull request #3632 from thinkyhead/i3_millie_language_fun ... Simplified LCD Language settings	2016-04-28 19:52:10 -07:00
Scott Lahteine	6c48852b20	Update distribution date	2016-04-28 18:06:53 +09:00
Scott Lahteine	2142d5a62e	Merge pull request #3627 from Blue-Marlin/German-again-and-again-and-agin ... Correct an error in lang_de	2016-04-27 20:14:15 -07:00
Scott Lahteine	0c11566f42	Replace LANGUAGE_INCLUDE with LCD_LANGUAGE	2016-04-27 20:06:40 -07:00
Scott Lahteine	259794c0be	Make DISPLAY_CHARSET_HD44780 a single setting	2016-04-27 20:06:40 -07:00
Blue-Marlin	e89f01d044	Correct an error in lang_de ... There is no way to translate "A-travel" to "A Rückzug". Thats simply wrong.	2016-04-27 12:59:48 +02:00
esenapaj	ee2f37f3cc	Update distribution date and readme ... It sync with the RC.	2016-04-27 11:21:51 +09:00
Scott Lahteine	ad0f70f2f3	Merge pull request #3620 from Blue-Marlin/feedrate_atfer_toolchange	2016-04-26 17:33:15 -07:00
Scott Lahteine	d58c5ac446	Merge pull request #3618 from esenapaj/patch-1	2016-04-26 17:20:04 -07:00
Scott Lahteine	2bb5cf5291	Merge pull request #3622 from floyd871/patch-1	2016-04-26 17:14:36 -07:00
Blue-Marlin	e58e281473	Fix feedrate after toolchange ... The fix is simple. Most changes are because of changed indendation, bacause of leaving early for wrong tool number	2016-04-27 00:57:45 +02:00
João Brázio	32d798fcc7	Converted all files on src to Unix file format	2016-04-26 21:23:39 +01:00
Michael Neumann	59cfc84dad	German "Umlaute" ... We don't have to avoid German "Umlaute" any more.	2016-04-26 21:52:05 +02:00
Matt Keveney	4dfc496965	added recalc_delta_settings() call in Config_RetrieveSettings. Appears to be necessary any time delta-related parameters (M665) are modified	2016-04-26 20:01:53 +09:00
Scott Lahteine	ec82e1e05d	Merge pull request #3616 from thinkyhead/rc_fixup_some_movement ... General cleanup around high level move functions	2016-04-25 20:23:38 -07:00
Scott Lahteine	abeab792cb	General cleanup around high level move functions ... - Use new `DEBUG_POS` macro for `DELTA` debug - Neaten up `prepare_move` a smidgen - Remove an old commented `prepare_move()` line	2016-04-25 20:02:24 -07:00
Scott Lahteine	66540f8b84	Merge pull request #3615 from thinkyhead/rc_whats_up_with_M112 ... Report current position to host after M206 / M428	2016-04-25 18:58:41 -07:00
Scott Lahteine	68d0347e67	Call report_current_position after M206 / M428	2016-04-25 18:43:28 -07:00
Scott Lahteine	dcb4cdaa9e	Call report_current_position instead of gcode_M114 directly	2016-04-25 18:43:27 -07:00
Scott Lahteine	e38baaa23e	Fix an acceleration anomaly by making locals signed	2016-04-25 14:17:20 -07:00
João Brázio	739dcda0f1	Renamed stopwatch::status to stopwatch::state	2016-04-25 17:40:43 +01:00
gralco	840e13f664	Introduce M108 cancel heatup for the hotend and bed ... This G-code is asynchronously handled in the get_serial_commands() parser.	2016-04-25 08:33:33 -06:00
Scott Lahteine	fce1e843b9	Patch steps rate comment in trapezoid function	2016-04-24 19:38:58 -07:00
João Brázio	7de0161204	Updated example config files	2016-04-24 05:21:17 +01:00
João Brázio	3b6f75511f	Updated multiple pins files	2016-04-24 05:21:17 +01:00
João Brázio	170f7e8a45	Rework Marlin's versioning system	2016-04-24 05:21:17 +01:00
esenapaj	8d0b2f358a	Cleanup for language files ... ・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2) ・Remove duplicated strings ・Arrange the strings in unified order ・Adjust spacing ・Remove some comments in Japanese files(follow-up the PR #3560) The most part of these changes were salvaged from closed my PR#3550.	2016-04-23 13:27:05 +09:00
Scott Lahteine	2bb56ef6de	Merge pull request #3597 from thinkyhead/rc_fix_g29_debug ... Move G29 debug output before matrix.set_to_identity()	2016-04-22 21:21:00 -07:00
João Brázio	a901555da4	Moved G29 debug output before matrix.set_to_identity()	2016-04-22 20:57:22 -07:00
Scott Lahteine	88c6693b9e	Fix a typo in #3586 to fix MBL	2016-04-22 20:04:08 -07:00
Scott Lahteine	aaf9d19954	Allow Z_SAFE_HOMING to compile without a probe	2016-04-21 15:55:49 -07:00
Scott Lahteine	92ab2c7dd8	Merge pull request #3587 from thinkyhead/rc_z_safe_homing_deps ... Define dependencies for Z_SAFE_HOMING if left out	2016-04-21 15:46:24 -07:00
Scott Lahteine	63142eef40	Define dependencies for Z_SAFE_HOMING if left out	2016-04-21 15:22:19 -07:00
Scott Lahteine	173334e535	Merge pull request #3418 from jbrazio/translate/danish ... Missing Danish translation	2016-04-21 14:56:43 -07:00
João Brázio	fe4fc88494	Closes #3351: missing Danish translation	2016-04-21 21:31:47 +01:00
Scott Lahteine	003aab6dfd	Revert MBL menus to "known" working point	2016-04-21 12:59:55 -07:00
Scott Lahteine	6fac4d9211	Merge pull request #3579 from thinkyhead/rc_fix_dogm_and_mbl_menus ... Fix menu redraw for DOGLCD, improve MBL	2016-04-20 20:52:56 -07:00
Scott Lahteine	7ddaa79ffe	Merge pull request #3578 from thinkyhead/rc_fix_twibus_less_debug_code ... Reduce PROGMEM usage by TWIBus, stopwatch	2016-04-20 20:52:16 -07:00
Scott Lahteine	cfd10fcba1	Merge pull request #3577 from thinkyhead/rc_fix_G92_set_e_twice ... Fix G92 setting E twice	2016-04-20 20:52:09 -07:00
Scott Lahteine	dc2281d2f4	Add nextMenu, nextEncoderPosition to change menus after handler loop	2016-04-20 20:19:12 -07:00
Scott Lahteine	7fa2bda1b9	Give the "alive dot" its own blink	2016-04-20 18:57:17 -07:00
Scott Lahteine	9d5e1f32fd	Use axis_homed in _lcd_level_bed_homing, item in Prepare before homing	2016-04-20 18:53:33 -07:00
Scott Lahteine	0c2aa92b07	Z Safe Homing for all ... The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so make it available for general use.	2016-04-20 17:04:52 -07:00
Scott Lahteine	9bcb72e7f8	Further patches to MBL - break up into more handlers	2016-04-20 16:37:35 -07:00
Scott Lahteine	3f6ae85748	Fix some MBL display issues for DOGLCD	2016-04-20 16:36:45 -07:00
Scott Lahteine	71b4f189bf	lcd_implementation_drawedit can take 1 arg	2016-04-20 16:36:45 -07:00
Scott Lahteine	1caa2628da	Use sync_plan_position_e function elsewhere	2016-04-20 13:02:19 -07:00
Scott Lahteine	c7df961144	Fix G92 so it only sets the plan position once	2016-04-20 13:01:58 -07:00
Scott Lahteine	1addb50b62	Shrink debug code in TWIBus and disable by default	2016-04-20 12:44:30 -07:00
Scott Lahteine	21a6b66807	Shrink debug code in Stopwatch and disable by default	2016-04-20 12:44:30 -07:00
Scott Lahteine	e523a0dc61	Fix bug in TWIBus ctor declaration	2016-04-20 12:37:46 -07:00
Scott Lahteine	ee9bd66a68	Add comments to debug bit flags	2016-04-20 12:37:22 -07:00
Scott Lahteine	3db5a75f30	Merge pull request #3568 from thinkyhead/rc_various_fixes ... General code cleanup, improved naming, etc.	2016-04-19 20:53:38 -07:00
Scott Lahteine	8a2587f017	Read size for MAX6675 from sizeof(max6675_temp)	2016-04-19 19:57:32 -07:00
Scott Lahteine	ac69fad96d	lowercase "stop" function	2016-04-19 19:43:54 -07:00
Scott Lahteine	39ee9c526b	setTargetedHotend => get_target_extruder_from_command	2016-04-19 19:43:54 -07:00
Scott Lahteine	cafa8b8ce3	Rename filament runout items	2016-04-19 19:43:39 -07:00
Scott Lahteine	27b2e2e786	Document some variables	2016-04-19 19:43:39 -07:00
Scott Lahteine	a4062a47ac	Rename baricuda variables	2016-04-19 19:43:38 -07:00
Scott Lahteine	78747b1328	min_pos/max_pos => sw_endstop_min/sw_endstop_max	2016-04-19 19:43:38 -07:00
Scott Lahteine	ba84d8d091	Allow setting PIDTEMP and PIDTEMPBED together or apart	2016-04-19 18:09:29 -07:00
Scott Lahteine	5cb8ec68ae	Merge pull request #3566 from thinkyhead/rc_babystep_show_steps ... Show steps done in the babystep display	2016-04-18 21:52:55 -07:00
Scott Lahteine	3083ee49f3	Merge pull request #3567 from thinkyhead/rc_mf_bash_scripts ... Git helper shell scripts for MarlinFirmware	2016-04-18 21:41:24 -07:00
Scott Lahteine	00d36d10e2	Merge pull request #3560 from thinkyhead/rc_better_graphical_lcd ... Aesthetic, functional improvements for Graphical Display	2016-04-18 21:38:02 -07:00
Scott Lahteine	dd94ce5bd5	Merge pull request #3565 from thinkyhead/rc_look_at_3563 ... Output error message for M303 if PIDTEMP is disabled	2016-04-18 21:22:50 -07:00
Scott Lahteine	9a12054e0e	Git helper shell scripts for MarlinFirmware	2016-04-18 21:18:35 -07:00
Scott Lahteine	4f04bf7fe8	Show steps done in the babystep display	2016-04-18 20:52:38 -07:00
Scott Lahteine	d988708ceb	Merge pull request #3559 from esenapaj/patch-1 ... Update and change Japanese translation	2016-04-18 20:17:54 -07:00
Scott Lahteine	026ae8f2f0	Call lcd_setFont only when needed	2016-04-18 20:09:04 -07:00
Scott Lahteine	90c97c8185	Add _draw_axis_label function to reduce source	2016-04-18 20:09:04 -07:00
Scott Lahteine	34b17d4a8a	Reduce heater status code if no bed	2016-04-18 20:09:04 -07:00
Scott Lahteine	fc30aa9d88	Aesthetic and functional improvements for graphical LCD	2016-04-18 20:09:04 -07:00
Scott Lahteine	b281001329	Use MSG_X, etc., on Hitachi LCD	2016-04-18 20:09:04 -07:00
Scott Lahteine	f90a8661cb	Uppercase XYZE on Graphical LCD	2016-04-18 20:09:03 -07:00
Scott Lahteine	3613c550fa	Rename README file for fonts	2016-04-18 20:09:03 -07:00
esenapaj	1110814ecf	Update and change Japanese translation ... Update and change Japanese translation ・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it. ・Add readable translated strings in comment ・Add Japanese translation. MSG_LCD_ENDSTOPS "エンドストップ" (utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters) ・Change translation. MSG_ACC "カソクド mm/s2" MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2")	2016-04-19 11:28:26 +09:00
Scott Lahteine	a26d70e932	Apply indentation to gcode_M303, PID_autotune	2016-04-18 19:04:45 -07:00
Scott Lahteine	ba66336503	Output error for disabled M303	2016-04-18 19:03:45 -07:00
Scott Lahteine	eda821ca1c	Merge pull request #3556 from philfifi/fix_pullup ... Fix bug in pullups handling for Z_MIN_PROBE	2016-04-18 18:04:26 -07:00
Scott Lahteine	25b1556a94	Merge pull request #3552 from tnw513/fix_endstops_witbox ... Endstop settings modified (witbox). Issue #3547	2016-04-18 18:03:22 -07:00
Scott Lahteine	2bc2485313	Update font remarks in Conditionals.h	2016-04-18 17:33:41 -07:00
Philippe LUC	86c868771b	Fix bug in pullups handling for Z_MIN_PROBE	2016-04-18 21:16:23 +02:00
Silvio Didonna	91de69bb6e	Endstop settings modified. Witbox have max endstops for X and Y.	2016-04-18 16:46:19 +02:00
Scott Lahteine	f2558b1f2c	Additional delta config updates	2016-04-17 20:04:52 -07:00
Marc Urben	9a661bdd59	Updated Kossel XL config files for the latest Marlin	2016-04-17 20:04:19 -07:00
Scott Lahteine	09c6323b68	Merge pull request #3543 from thinkyhead/rc_better_bootscreen ... Better splash screen consolidation	2016-04-17 17:20:13 -07:00
Scott Lahteine	5905ec5ba8	Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift ... Add a final lift, if configured, in Manual Bed Leveling	2016-04-17 17:20:02 -07:00
Scott Lahteine	af1711365b	Merge pull request #3538 from jbrazio/bugfix/endtop-hit-redeclared ... _ENDSTOP_HIT redeclared	2016-04-17 17:12:56 -07:00
Scott Lahteine	ed622ac796	Better splash screen consolidator	2016-04-17 17:06:07 -07:00
Jeff K	90c49f5a14	Fixed invalid addressing (overflow) of position_shift / software endstops ... Signed-off-by: Jeff K	2016-04-17 19:28:50 -04:00
João Brázio	bcf1e027bb	Fix the redeclaration of _ENDSTOP_HIT	2016-04-17 18:37:37 +01:00
Scott Lahteine	c242bee449	Add a final lift, if configured, in Manual Bed Leveling	2016-04-17 00:12:46 -07:00
Scott Lahteine	b6227932f5	Merge pull request #3530 from thinkyhead/rc_set_rcbugfix_for_now ... Set version for RCBugFix	2016-04-16 21:40:55 -07:00
Scott Lahteine	19741a0ba6	Merge pull request #3503 from thinkyhead/rc_lcd_endstop_msg ... Show all endstops on LCD in checkHitEndstops	2016-04-16 21:32:25 -07:00
Scott Lahteine	7aaff371b0	Set version for RCBugFix	2016-04-16 21:30:52 -07:00
Scott Lahteine	db86aaf385	Merge pull request #3528 from thinkyhead/rc_fix_bed_level_equation_oopsie ... Fix borked set_bed_level_equation_lsq	2016-04-16 21:01:06 -07:00
Scott Lahteine	837df6108c	Fix borked set_bed_level_equation_lsq	2016-04-16 20:35:42 -07:00
Scott Lahteine	7c16e774ca	Show all endstops on LCD in checkHitEndstops	2016-04-16 20:08:42 -07:00
Scott Lahteine	40050db210	Improve code in Sd2Card::readBlock	2016-04-16 20:03:39 -07:00
Scott Lahteine	8429ae6beb	Merge pull request #3525 from thinkyhead/rc_fix_pid_params_per_extruder ... Fix broken PID_PARAMS_PER_EXTRUDER	2016-04-16 19:49:42 -07:00
Scott Lahteine	339b5b3e34	Patch more configs with new changes	2016-04-16 19:35:02 -07:00
Scott Lahteine	ef2fd620e9	Suggested fixups for LCD/SD config comments	2016-04-16 19:35:02 -07:00
João Brázio	7b5d6ba315	Rebase & feedback	2016-04-16 19:35:02 -07:00
João Brázio	d7cc2c0847	Moved some conditionals to Conditionals.h	2016-04-16 19:32:41 -07:00
João Brázio	36a49eab1c	Improved the LCD and SD comments blocks in Configuration.h	2016-04-16 19:32:41 -07:00
Scott Lahteine	d4a848c72a	Fix broken PID_PARAMS_PER_EXTRUDER ... As noted by @FalloutBe in #3519	2016-04-16 19:19:40 -07:00
Scott Lahteine	0fc84b75f4	Merge pull request #3522 from esenapaj/patch-1 ... Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)	2016-04-16 19:03:27 -07:00
Scott Lahteine	4b75b11a53	Wrap defines in parentheses in configs, M48	2016-04-16 18:21:09 -07:00
esenapaj	832e1c1f2a	Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking) ... ・Add more "UL" suffix ・Restore removed "UL" suffix	2016-04-17 07:50:02 +09:00
Scott Lahteine	234987ee2f	Fix MBL lift	2016-04-16 14:17:06 -07:00
Scott Lahteine	e0830bf8f1	Don't use LCD alert unless error or alert level is reset later	2016-04-15 18:48:49 -07:00
Scott Lahteine	773229b020	Merge pull request #3515 from thinkyhead/rc_wider_splash ... On wider screens show a wider splash page, if possible	2016-04-15 17:26:01 -07:00
Scott Lahteine	86467c24be	On wider screens show a wider splash page, if possible	2016-04-15 16:42:29 -07:00
Scott Lahteine	a8e4d7c135	Merge pull request #3477 from alephobjects/BedTempHysteresis ... Implementation of M190 bed temp hysteresis	2016-04-15 16:20:58 -07:00
esenapaj	5ecd75eeb3	Fix for PR #3502(General cleanup of arc code)	2016-04-16 07:22:07 +09:00
gralco	8ec8d59df8	Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME	2016-04-15 11:20:32 -06:00
Scott Lahteine	1cc622b167	Fix minor spelling in comments	2016-04-14 20:06:59 -07:00
Scott Lahteine	866c5be395	Merge pull request #3500 from thinkyhead/rc_shrink_menu_macros ... Reduce redundancy in MENU_ITEM code	2016-04-14 19:09:14 -07:00
Scott Lahteine	6e52b0b723	Merge pull request #3504 from thinkyhead/rc_fix_debugging ... Fix debugging of vector_3	2016-04-14 19:08:30 -07:00
Scott Lahteine	88367a37f7	Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits ... Relating current_position, min_pos, max_pos, and home_offset	2016-04-14 18:50:43 -07:00
Scott Lahteine	b20bf1826d	Fix debugging of vector_3	2016-04-14 18:45:26 -07:00
Scott Lahteine	4fb8013be1	Reduce redundancy in MENU_ITEM code	2016-04-14 18:42:06 -07:00
Scott Lahteine	b243844690	Merge pull request #3502 from thinkyhead/rc_fix_arcs_bugs ... General cleanup of arc code	2016-04-14 18:19:44 -07:00
Scott Lahteine	f2abfd6d48	Merge pull request #3501 from thinkyhead/rc_config_comment_cleanup ... Update some comments in Configuration.h	2016-04-14 18:19:29 -07:00
Scott Lahteine	2129db581e	Simplify MBL movement, zigzag	2016-04-14 16:58:42 -07:00
Scott Lahteine	0493fccc0b	mbl.active is a bool now	2016-04-14 16:58:42 -07:00
Scott Lahteine	b05f448317	Comments on MBL menu items	2016-04-14 16:58:42 -07:00
Scott Lahteine	e08dd0d831	Merge pull request #3498 from thinkyhead/rc_preheat_abs_both_3489 ... Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123	2016-04-14 16:57:38 -07:00
Scott Lahteine	9e95f30de0	Merge pull request #3495 from jbrazio/bugfix/followup-3485 ... Throw an error if ENCODER_PULSES_PER_STEP < -1	2016-04-14 16:56:36 -07:00
Scott Lahteine	8e5099fa0c	Update software endstop positions with M206, M428, G92, etc.	2016-04-14 16:47:22 -07:00
Scott Lahteine	5cfb2533d6	Initial cleaning up of arc code	2016-04-14 16:43:49 -07:00
Scott Lahteine	de8c0baf8b	Update some comments in Configuration.h	2016-04-14 16:41:20 -07:00
Scott Lahteine	fda8f96f00	Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123 ... Trying to preheat a non-existent extruder causes a crash.	2016-04-14 15:48:43 -07:00
João Brázio	9a3f676709	Throw an error if ENCODER_PULSES_PER_STEP < -1	2016-04-14 16:20:17 +01:00
gralco	69c00aea4c	Include bed hysteresis setting in the example configs	2016-04-14 08:03:38 -06:00
Scott Lahteine	9ce4264fda	Merge pull request #3490 from thinkyhead/rc_mbl_adjustments ... Document some movement functions, rename a local	2016-04-13 20:55:20 -07:00
Scott Lahteine	f8e10ff1d8	Merge pull request #3491 from thinkyhead/rc_mechanical_probe ... Support for "mechanical probe" with Allen Key as a special case	2016-04-13 20:55:14 -07:00
Scott Lahteine	7eb476597f	Update some comments in Configuration.h	2016-04-13 20:34:42 -07:00
esenapaj	2eb1b102f8	Support for "mechanical probe" with Allen Key as a special case	2016-04-13 20:34:12 -07:00
Scott Lahteine	cfcd3d7b3e	Rename z_offset local to zoffset	2016-04-13 20:09:20 -07:00
Scott Lahteine	5fd20ecac3	Comments on some movement functions	2016-04-13 20:09:20 -07:00
Scott Lahteine	c1b953d38f	Merge pull request #3487 from thinkyhead/rc_redo_esenpaj_3479 ... Apply esenapaj 3479 and delta/scara position bugfix	2016-04-13 18:11:33 -07:00
Scott Lahteine	a781a6f955	Apply esenapaj 3479 and delta/scara position bugfix	2016-04-13 17:41:20 -07:00
Scott Lahteine	2ae7394640	More fine-grained control of LCD redraw	2016-04-12 21:34:34 -07:00
Scott Lahteine	525d8256d4	Merge pull request #3481 from thinkyhead/rc_extruder_offset_array ... Fix: gcode_T using non-existent Z offset	2016-04-12 18:23:08 -07:00
Scott Lahteine	b9301e6c62	Merge pull request #3482 from thinkyhead/rc_fix_HAS_Z_MIN_PROBE ... Patch conditions for HAS_Z_MIN_PROBE	2016-04-12 18:23:02 -07:00
Scott Lahteine	dc0a3e37be	Patch conditions for HAS_Z_MIN_PROBE	2016-04-12 18:11:36 -07:00
Scott Lahteine	46881c846c	Add comments for extruder offset options	2016-04-12 17:16:58 -07:00
Scott Lahteine	edf376ce0d	Fix: gcode_T using non-existent Z offset ... As noted by @snowzach in #3461	2016-04-12 17:15:10 -07:00
gralco	178aeb79c8	Implementation of M190 bed temp hysteresis	2016-04-12 08:56:14 -06:00
Scott Lahteine	0439483bc8	Merge pull request #3476 from thinkyhead/rc_debug_leveling_gcode_t ... Add DEBUG_LEVELING output for gcode_T	2016-04-11 21:03:15 -07:00
Scott Lahteine	c03e5f5efd	Merge pull request #3475 from thinkyhead/rc_language_cleanup ... General cleanup of language files	2016-04-11 20:50:57 -07:00
Scott Lahteine	910d3648bb	Merge pull request #3474 from thinkyhead/rc_russian_apr2016 ... Additional Russian translations	2016-04-11 20:50:50 -07:00
Scott Lahteine	63d8893f5d	Add DEBUG_LEVELING output for gcode_T	2016-04-11 20:45:10 -07:00
Scott Lahteine	081cfc5cf3	Merge pull request #3472 from thinkyhead/fix_issue_3375 ... Initialize stepper counts for Delta/SCARA	2016-04-11 19:59:12 -07:00
Scott Lahteine	fe0fe184aa	Replace some tabs with spaces	2016-04-11 19:42:20 -07:00
Scott Lahteine	e773d081c0	General language file cleanup	2016-04-11 19:42:09 -07:00
Scott Lahteine	b63c79b5ff	Merge pull request #3473 from thinkyhead/rc_one_more_elapse ... Fix a messed up ELAPSED instance	2016-04-11 19:30:59 -07:00
Scott Lahteine	068bc980ce	Additional Russian translations ... Thanks to @gans-AD – #3363	2016-04-11 19:30:14 -07:00
Scott Lahteine	f840c7de4d	Initialize stepper counts for Delta/SCARA	2016-04-11 19:02:35 -07:00
Scott Lahteine	c5a8755cc0	Fix a messed up ELAPSED instance	2016-04-11 18:48:27 -07:00
Scott Lahteine	81918657f4	Fix Deutsch string errors, redundancies	2016-04-11 18:12:32 -07:00
Scott Lahteine	56acaf3594	Merge pull request #3469 from thinkyhead/rc_aleph_cooldownfix ... Fix for M109 and M190 cooldown	2016-04-11 18:01:01 -07:00
gralco	c218db136a	Fix for M109 and M190 cooldown ... Also removes the re-definition of now inside M190's while loop	2016-04-11 17:12:23 -07:00
Scott Lahteine	e2a197ab71	Merge pull request #3467 from AnHardt/Fix-Servo-without-endstop-probe ... Fix-Servo-without-endstop/probe	2016-04-11 17:04:54 -07:00
Scott Lahteine	3a1ac14bbc	Merge pull request #3437 from thinkyhead/rc_lcd_encoder_movement ... More bits when encoderPosition is cast as signed	2016-04-11 17:03:23 -07:00
Scott Lahteine	c5a2ce4366	Merge pull request #3446 from thinkyhead/rc_fixup_M206_and_mesh ... Fix home_offset handling and account for it in G29	2016-04-11 16:49:01 -07:00
Scott Lahteine	b1bb1c7989	Merge pull request #3466 from thinkyhead/rc_look_for_leveling_bug ... Add CORE support to st_set_position and plan_set_position	2016-04-11 16:45:00 -07:00
AnHardt	9cc571b312	Fix-Servo-without-endstop-probe ... Sorry for not having realized someone (me) redefined not existing servo pinns to -1, some lines above. This is a simple error - not a feature.	2016-04-12 01:01:11 +02:00
Scott Lahteine	3e5312f116	CORE support for st_set_position & plan_set_position	2016-04-11 15:13:42 -07:00
Scott Lahteine	e087a99a10	Some cleanup of st_get_pos functions	2016-04-11 15:13:42 -07:00
João Brázio	ca6c6ec4ca	Versions of Arduino IDE prior to 1.6.0 are no longer supported	2016-04-11 19:03:06 +01:00
Scott Lahteine	fdee2be49c	More logging of matrix behavior	2016-04-11 00:06:33 -07:00
Scott Lahteine	7f265db3ef	Move sync_plan_position after DEBUG_LEVELING	2016-04-10 23:40:11 -07:00
Scott Lahteine	02550af7c3	Merge pull request #3453 from thinkyhead/rc_jbrazio_m190 ... ELAPSED / PENDING for rollover-safe time checking	2016-04-10 20:25:02 -07:00
Scott Lahteine	7c770f039c	Merge pull request #3456 from thinkyhead/rc_MSG_ERR_REDUNDANT_TEMP ... Remove redundant text from MSG_ERR_REDUNDANT_TEMP	2016-04-10 20:23:55 -07:00
Scott Lahteine	925cc305ce	Merge pull request #3455 from michos-conradt/RCBugFix ... Add missing translations for German	2016-04-10 19:18:42 -07:00
Scott Lahteine	011f4736f1	Remove redundant text from MSG_ERR_REDUNDANT_TEMP	2016-04-10 19:14:46 -07:00
Scott Lahteine	906c1c066f	Merge pull request #3423 from jbrazio/translate/pt_BR ... Added missing pt_BR translation	2016-04-10 19:13:52 -07:00
Scott Lahteine	803845ec18	Add a case for M113 to process_next_command	2016-04-10 18:53:03 -07:00
Michael Conradt	f3a7a5c99b	Merge branch 'RCBugFix' into translations	2016-04-11 03:50:23 +02:00
Michael Conradt	8b923039e2	Add missing german translations.	2016-04-11 03:20:21 +02:00
Scott Lahteine	386140f361	Test time difference in safe way	2016-04-10 18:09:31 -07:00
Scott Lahteine	1b7356b3a1	Account for home_offset in G29 handler	2016-04-10 15:35:02 -07:00
Scott Lahteine	f3562dd895	Have M206 alter current_position, M428 use new function	2016-04-10 15:35:01 -07:00
Scott Lahteine	562e281c73	Merge pull request #3443 from thinkyhead/rc_host_timeout_tweak ... Adjust timeout code in host_keepalive	2016-04-09 17:45:36 -07:00
Scott Lahteine	6d465321b5	Adjust timeout code in host_keepalive	2016-04-09 16:58:17 -07:00
Scott Lahteine	8198cc30b5	More bits when encoderPosition is cast as signed	2016-04-09 14:22:12 -07:00
Michael Neumann	95acba2cfa	Wrong Pin Assignment Megatronics 3 ... SERVO2 is doubled defined and causes compiler errors	2016-04-09 11:23:22 +02:00
Scott Lahteine	50c3140040	Merge pull request #3414 from thinkyhead/rc_host_timeout_mods ... Host Keepalive configurable timeout with 2s default	2016-04-08 21:45:45 -07:00
Scott Lahteine	6bd20371f0	Merge pull request #3438 from thinkyhead/rc_M109_residency_loop_fix ... Fix bug which can cause an infinite M109 loop	2016-04-08 21:36:30 -07:00
Scott Lahteine	96e37bb70a	Merge pull request #3419 from DavidBjerreBjoerklund/patch-2 ... Update language_da.h	2016-04-08 21:35:58 -07:00
Scott Lahteine	13d758c651	Merge pull request #3420 from DavidBjerreBjoerklund/patch-3 ... Update language_da.h	2016-04-08 21:31:14 -07:00
Scott Lahteine	518068a5a8	Merge pull request #3425 from tnw513/FixLangIt ... Optimized Italian strings to fit in 16 character display	2016-04-08 21:29:28 -07:00
Scott Lahteine	1b81e5adc7	Merge pull request #3431 from AnHardt/lang-de ... de-language additions	2016-04-08 21:25:00 -07:00
Scott Lahteine	1acf901b63	Adjustments to residency_start_ms handling	2016-04-08 21:20:23 -07:00
gralco	907aed57db	Fix bug which can cause an infinite M109 loop ... Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape. Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."	2016-04-08 21:20:23 -07:00
jbrazio	dd3a06a95a	Implemented M155 and M156, a generic TWI/I2C interface for Marlin	2016-04-08 20:14:37 -07:00
Scott Lahteine	843aa90b5a	Merge pull request #3434 from thinkyhead/rc_more_debug_leveling ... Additional debug leveling output	2016-04-08 18:57:18 -07:00
Scott Lahteine	a644ab1de4	Minor patch ups to G29 ... This may fix a subtle bug caused by doing `G29` more than once without `G28` between.	2016-04-08 17:53:15 -07:00
Scott Lahteine	cba2698871	Additional DEBUG_LEVELING output	2016-04-08 17:53:15 -07:00
AnHardt	c3d1b7db2d	de-language additions	2016-04-08 22:51:04 +02:00
Scott Lahteine	4e17187c96	Merge pull request #3426 from thinkyhead/rc_no_unhomed_lcd_move_on_delta_scara ... No LCD Move for unhomed Delta/SCARA	2016-04-07 19:29:45 -07:00
Scott Lahteine	5e18d650c4	Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR ... No casting needed for SERIAL_ECHOPAIR	2016-04-07 19:29:18 -07:00
Scott Lahteine	e0b0d1eb6b	Add M113 to get/set Host Keepalive	2016-04-07 19:25:56 -07:00
Scott Lahteine	85883da90c	Implement basic HOST_KEEPALIVE_INTERVAL	2016-04-07 19:25:56 -07:00
Scott Lahteine	2eca8d63b3	Add DEFAULT_KEEPALIVE_INTERVAL setting	2016-04-07 19:25:56 -07:00
Scott Lahteine	098fb8f8c9	Merge pull request #3413 from thinkyhead/rc_probe_G30_position ... Report the probe position in G30	2016-04-07 19:25:33 -07:00
Scott Lahteine	3460d01441	Merge pull request #3422 from jbrazio/translate/pt_PT ... Update pt_PT translation	2016-04-07 19:18:56 -07:00
Scott Lahteine	c9c7c66b95	Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion ... M109: Protect against EXTRUDE_MINTEMP expansion	2016-04-07 19:18:34 -07:00
Scott Lahteine	d7cbb2eec9	Merge pull request #3403 from jbrazio/feature/stopwatch ... Print job timer rework	2016-04-07 19:18:03 -07:00
Scott Lahteine	f834bcd43a	Merge pull request #3415 from thinkyhead/rc_filwidth_issue ... Fix FILAMENT_WIDTH_SENSOR measurement	2016-04-07 19:08:42 -07:00
Scott Lahteine	5fc6daba2b	Disallow REPRAPWORLD_KEYPAD moves on Delta/SCARA until homed	2016-04-07 18:40:54 -07:00
Scott Lahteine	7bb15a1c57	Consolidate REPRAPWORLD_KEYPAD definitions	2016-04-07 18:40:54 -07:00
Scott Lahteine	dc19b69697	No casting needed for SERIAL_ECHOPAIR	2016-04-07 16:33:21 -07:00
Scott Lahteine	165e73794a	Tweak encoderPosition non-zero test	2016-04-07 16:09:42 -07:00
Scott Lahteine	479d307a44	Disable LCD Move XYZ for unhomed Delta/SCARA	2016-04-07 16:09:42 -07:00
Silvio Didonna	9088802da1	Optimized Italian strings to fit in 16 character display	2016-04-07 19:18:22 +02:00
João Brázio	801cd48a72	Added missing pt_BR translation	2016-04-07 13:07:57 +01:00
João Brázio	013f19054b	Update pt_PT translation	2016-04-07 13:00:08 +01:00
João Brázio	471d30cc1c	M109: Protected against EXTRUDE_MINTEMP expansion	2016-04-07 12:50:57 +01:00
DavidBjerreBjoerklund	5f840d2e30	Update language_da.h ... Corrected: MSG_KILLED MSG_NO_MOVE MSG_STOPPED MSG_PRINT_ABORTED MSG_ON MSG_OFF	2016-04-07 13:42:27 +02:00
João Brázio	7c7e30f4cc	Adherence to the new OOP coding standards	2016-04-07 12:41:09 +01:00
DavidBjerreBjoerklund	b80b40a578	Update language_da.h ... Added translation mentioned in issue #3351: Homing would be best tranlated homing, or "Kører til udgangsposition". #define MSG_SET_HOME_OFFSETS #define MSG_LEVEL_BED_HOMING #define MSG_LEVEL_BED_WAITING #define MSG_LEVEL_BED_DONE #define MSG_LEVEL_BED_CANCEL #define MSG_HOME_OFFSETS_APPLIED	2016-04-07 12:52:31 +02:00
Scott Lahteine	573d772c92	Merge pull request #3416 from paulusjacobus/RCBugFix ... Optimised Ducth messages to fit in 16 Char display Update language_nl.h	2016-04-06 20:41:14 -07:00
paulusjacobus	3f7ae9a7ce	Update language_nl.h ... Optimised all added messages to fit within 16 Characters	2016-04-07 13:15:00 +10:00
Scott Lahteine	865dcf3fb4	Fix FILAMENT_WIDTH_SENSOR measurement ... Only measure and store filament width when E is going forward.	2016-04-06 19:48:04 -07:00
Scott Lahteine	2f6c5fe2da	Report the probe position in G30	2016-04-06 16:55:21 -07:00
Scott Lahteine	74effedbf5	Merge pull request #3412 from paulusjacobus/RCBugFix ... rebased my fork with RCBugFix release in order to push language_nl.h	2016-04-06 16:53:35 -07:00
Scott Lahteine	bba1f16589	Merge pull request #3411 from esenapaj/patch-1 ... Update Readme.fonts about Kana	2016-04-06 16:19:19 -07:00
Paul de Groot	48a4410f02	rebased my fork with RCBugFix release in order to push language_nl.h	2016-04-07 08:17:59 +10:00
esenapaj	ff9511b870	Update Readme.fonts about Kana ... I think that that sentence has been completed its part. Because Kana fonts were revised by me the other day(PR #3289), who am a native Japanese. And for @AnHardt, I'd like to take this opportunity to express one's heartfelt gratitude as a far eastern person, about you has been maintaining the resource of Japanese despite you are a far western person.	2016-04-07 07:13:46 +09:00
Silvio Didonna	e215c7100d	fixed mistranslations and minor changes for consistency between "it" and "en" files.	2016-04-06 16:45:04 +02:00
Silvio Didonna	6208db3b00	fixed mistranslations and minor changes for consistency between "it" and "en" files.	2016-04-06 16:40:01 +02:00
João Brázio	e48d0263bf	Bugfix: M32 was still using the old print timer	2016-04-06 04:41:36 +01:00
João Brázio	e8b80d8c20	Implemented M75, M76, M77 to control the print timer	2016-04-06 04:38:42 +01:00
João Brázio	eb61051556	Rework the print job timer to use the stopwatch class	2016-04-06 04:34:03 +01:00
João Brázio	399101fff3	Implemented the stopwatch class and methods	2016-04-06 04:23:45 +01:00
Scott Lahteine	98f2e9fc83	Reduce string storage required for DEBUG_LEVELING	2016-04-05 19:04:42 -07:00
Scott Lahteine	1af5d7b35f	Add more leveling-debug output	2016-04-05 18:31:10 -07:00
Scott Lahteine	d5b19a49f6	Merge pull request #3384 from thinkyhead/rc_adjust_M111_output ... Final tweaks to M111 output	2016-04-05 16:48:59 -07:00
Scott Lahteine	da2ff4a6d3	Catch a TEMP_SENSOR error before a pins issue	2016-04-05 16:17:28 -07:00
Scott Lahteine	90f6f02aca	Merge pull request #3397 from thinkyhead/rc_menu_issues_fixer ... Revert #3388, clean up lcd_move code	2016-04-05 15:45:35 -07:00
Scott Lahteine	fb38d698db	Add feedback after "Click to Begin"	2016-04-05 15:35:05 -07:00
Scott Lahteine	d5f0db26dc	Merge pull request #3390 from jbrazio/docs/update-source-url ... Update DEFAULT_SOURCE_URL comment	2016-04-05 15:17:07 -07:00
Scott Lahteine	ce58d1d4d5	Merge pull request #3392 from barus93/patch-2 ... Update language_it.h	2016-04-05 15:16:24 -07:00
Scott Lahteine	582b58e660	Add audio feedback to edit items	2016-04-05 14:51:11 -07:00
Scott Lahteine	a70c3ffc21	Minor syntax tweak with encoderPosition	2016-04-05 14:51:11 -07:00
Scott Lahteine	0f247187b8	Drop extra setting of currentMenu	2016-04-05 14:51:11 -07:00
Scott Lahteine	24cde86a4f	Fix syntax highlighting of menu_edit_type lines	2016-04-05 14:51:11 -07:00
Scott Lahteine	86372cd394	Add underscore to internal lcd move function names	2016-04-05 14:51:11 -07:00
Scott Lahteine	aa97328cd3	Use min_pos/max_pos for _lcd_move	2016-04-05 14:51:10 -07:00
Scott Lahteine	f936df9507	Small cleanup of feedrate dead-zone	2016-04-05 14:51:10 -07:00
Scott Lahteine	f5c2fb27cd	Handle defer_return_to_status in lcd_goto_menu	2016-04-05 14:51:10 -07:00
Scott Lahteine	8459f7fa5c	Use ms where possible.	2016-04-05 14:51:10 -07:00
Scott Lahteine	34ce9c4c1c	Restore save previous for menu edit items	2016-04-05 14:26:36 -07:00
Gege2B	03d5c9a482	Merge remote-tracking branch 'upstream/RCBugFix' into RCBugFix	2016-04-05 12:14:15 +02:00
Gege2B	4ea45d5c56	Some omitted french translation	2016-04-05 12:04:29 +02:00
barus93	f43e37bb0c	Update language_it.h ... New messages translated: #define MSG_LEVEL_BED_HOMING "Homing XYZ" #define MSG_LEVEL_BED_WAITING "Click to Begin" #define MSG_LEVEL_BED_DONE "Leveling Done!" #define MSG_LEVEL_BED_CANCEL "Cancel" . . . #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"	2016-04-05 07:24:07 +02:00
João Brázio	9240682630	Followup #3326: Update DEFAULT_SOURCE_URL comment	2016-04-05 02:21:23 +01:00
Scott Lahteine	4b8a71055e	Merge pull request #3388 from thinkyhead/rc_fix_move_menu_bug ... Fix: menu edit items saving position twice	2016-04-04 17:05:15 -07:00
Scott Lahteine	1220dfd5d6	Fix: menu edit items saving position twice	2016-04-04 16:36:04 -07:00
Scott Lahteine	b5920837ea	Merge pull request #3370 from esenapaj/patch-1 ... Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags	2016-04-04 16:12:50 -07:00
Scott Lahteine	53b397ab14	Merge pull request #3364 from jbrazio/script/find-missing-translations ... Added a script to check all language files for missing translations	2016-04-04 16:10:36 -07:00
Scott Lahteine	d6fe454a13	Merge pull request #3386 from thinkyhead/rc_spanish_rebase ... Add Missing Spanish translation	2016-04-04 16:07:34 -07:00
Scott Lahteine	2abea41c41	Merge pull request #3385 from thinkyhead/rc_dutch_translation ... Update language_nl.h	2016-04-04 16:02:11 -07:00
RicardoGA	1bfaf57ee5	Add Missing Spanish translation ... Add the missing translation (Spanish) issue #3353	2016-04-04 15:55:59 -07:00
paulusjacobus	4a4b797dca	Update language_nl.h ... Added these messages with Dutch translation #define MSG_BED_Z #define MSG_A_TRAVEL #define MSG_HEATING_FAILED_LCD #define MSG_ERR_REDUNDANT_TEMP #define MSG_THERMAL_RUNAWAY #define MSG_ERR_MAXTEMP #define MSG_ERR_MINTEMP #define MSG_ERR_MAXTEMP_BED #define MSG_ERR_MINTEMP_BED #define MSG_HEATING #define MSG_HEATING_COMPLETE #define MSG_BED_HEATING #define MSG_BED_DONE	2016-04-04 15:46:50 -07:00
Scott Lahteine	1ee903f30d	Merge pull request #3376 from gege2b/RCBugFix ... French translation	2016-04-04 15:40:00 -07:00
Scott Lahteine	c5ff2c7d32	Merge pull request #3377 from clexpert/patch-1 ... Update language_cz.h	2016-04-04 15:39:44 -07:00
Scott Lahteine	99898ea652	Merge pull request #3379 from barus93/patch-2 ... Update language_it.h	2016-04-04 15:39:15 -07:00
Scott Lahteine	56e8e2b0eb	Final tweaks to M111 output	2016-04-04 15:36:07 -07:00
barus93	040a0c49db	Update language_it.h ... ADD missing translation	2016-04-04 20:22:34 +02:00
Petr Zahradnik	8b843e997a	Update language_cz.h	2016-04-04 17:26:19 +02:00
Petr Zahradnik	3cd2beb750	Update language_cz.h	2016-04-04 16:54:26 +02:00
Gege2B	34bf9530c0	French translation	2016-04-04 16:45:06 +02:00
João Brázio	d819a4aff9	Fixes #3346, followup #3343: variables must defined with the static keyword to work with PROGMEM when defined inside functions	2016-04-04 15:02:18 +01:00
esenapaj	1326dc7258	Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags ... This is follow-up the commit e5771346a4. Update unnoticed files.	2016-04-04 17:49:25 +09:00
Scott Lahteine	0433df3835	Merge pull request #3366 from jbrazio/translate/pt_PT ... Added missing translations for pt_PT	2016-04-03 21:02:13 -07:00
João Brázio	dff6adfbca	Fixes #3361: Added missing translations for pt_PT	2016-04-04 04:57:32 +01:00
Scott Lahteine	c0e7257932	Fix bug in new endstop pullups handling	2016-04-03 20:52:32 -07:00
João Brázio	f94900ee79	Added a script to check all language files for missing translations	2016-04-04 04:46:04 +01:00
Scott Lahteine	de39056f68	Merge pull request #3343 from thinkyhead/rc_fix_m111_output ... Fix M111 output using pgm_read_word, as required	2016-04-03 17:44:38 -07:00
Scott Lahteine	fd0ac371b0	Fix M111 output using pgm_read_word as required ... As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275	2016-04-03 17:33:06 -07:00
esenapaj	c4d7e0307c	Update Japanese translation	2016-04-04 09:11:23 +09:00
Scott Lahteine	c045ec8cb3	Merge pull request #3065 from thinkyhead/rc_doc_tweaks ... Simplified endstop configuration	2016-04-03 17:05:47 -07:00
Scott Lahteine	d771174797	Merge pull request #3337 from esenapaj/patch-2 ... suppress warnings	2016-04-03 17:01:22 -07:00
Scott Lahteine	f2032cfcf6	Merge pull request #3341 from thinkyhead/rc_english_patch ... Fix English definition for MSG_LEVEL_BED_CANCEL	2016-04-03 16:58:51 -07:00
Scott Lahteine	09c6f80c1e	Fix MSG_LEVEL_BED_CANCEL english	2016-04-03 16:41:27 -07:00
esenapaj	afe7d26543	Update Japanese translation	2016-04-03 16:39:37 -07:00
Scott Lahteine	3aee89b93a	Merge pull request #3338 from thinkyhead/rc_patches_april_3 ... Add history to LCD Menus, fix up Manual Bed Leveling	2016-04-03 16:37:39 -07:00
Scott Lahteine	7a2f73c6db	Remove extra comma from LCDHandlerAction	2016-04-03 16:27:30 -07:00
Scott Lahteine	3fbf67e5ce	Patch MBL feedback and event handling	2016-04-03 16:27:30 -07:00
Scott Lahteine	ef2fbaec98	Headings for menu sub-items, actions, etc.	2016-04-03 16:27:29 -07:00
Scott Lahteine	dc109ac4e2	Move MBL code to its logical place	2016-04-03 16:27:29 -07:00
Scott Lahteine	6730408ec1	Move lcd_autostart_sd to its logical place	2016-04-03 16:27:29 -07:00
Scott Lahteine	056b80dc53	Have "back" menu items go to the previous item	2016-04-03 16:27:29 -07:00
Scott Lahteine	c94482168b	Add MSG_LEVEL_BED_CANCEL for MBL	2016-04-03 16:27:29 -07:00
Scott Lahteine	877fb1f588	Account for MAX31855 in conditionals	2016-04-03 16:19:17 -07:00
Scott Lahteine	d24f14a799	Add HAS_TEMP_HOTEND define	2016-04-03 16:18:49 -07:00
esenapaj	f9e1a0ee6c	suppress warnings	2016-04-04 06:48:53 +09:00
Scott Lahteine	cf9a171aa9	Merge pull request #3330 from thinkyhead/rc_mbl_lcdDrawUpdate ... Improvements to MBL, general LCD menu handling	2016-04-02 19:20:23 -07:00
Scott Lahteine	2b01649533	Move default machine info to pins files	2016-04-02 18:53:05 -07:00
Scott Lahteine	4f24323817	Split DEFAULT_MACHINE_NAME from DEFAULT_SOURCE_URL ... Addressing #3325 – Avoid undefined symbol errors in the compiler.	2016-04-02 18:41:01 -07:00
Scott Lahteine	771ee1c1a9	Update MBL menu sub-function names	2016-04-02 18:20:47 -07:00
Scott Lahteine	d659777e70	Fix MBL to handle re-entrant calls	2016-04-02 18:14:49 -07:00
Scott Lahteine	5719fcba51	Add MSG_LEVEL_BED_DONE and MSG_LEVEL_BED_WAITING	2016-04-02 18:14:49 -07:00
Scott Lahteine	80b8fd1cad	Add MSG_HOME_OFFSETS_APPLIED	2016-04-02 18:14:49 -07:00
Scott Lahteine	d1c45ff80b	More user interaction in MBL	2016-04-02 18:14:49 -07:00
Scott Lahteine	240b71ee1c	Give names to lcdDrawUpdate values	2016-04-02 18:14:48 -07:00
Scott Lahteine	b0a3c7a91c	Add feedback sounds to MBL items	2016-04-02 17:08:43 -07:00
Scott Lahteine	782c598e66	Use ftostr43 with '+' option in MBL Z adjuster	2016-04-02 17:08:43 -07:00
Scott Lahteine	f08b0d034f	Merge pull request #3328 from RicardoGA/RC_Babystepping_fix ... Babystepping Fix	2016-04-02 16:48:45 -07:00
Scott Lahteine	09437466b1	Merge pull request #3324 from tnw513/fix_filament_dia ... changed DEFAULT_NOMINAL_FILAMENT_DIA for consistency between example config files	2016-04-02 16:40:24 -07:00
Scott Lahteine	2b4c42610c	Adjust SanityCheck messages	2016-04-02 16:39:23 -07:00
Scott Lahteine	a617d12f70	Account for Z_DUAL_ENDSTOPS in sanity checking of endstops	2016-04-02 16:39:23 -07:00
Scott Lahteine	868eebfdee	Simplify configuration of Z2 endstops	2016-04-02 16:39:23 -07:00
Scott Lahteine	e5771346a4	Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags	2016-04-02 16:39:23 -07:00
Scott Lahteine	071c742b8a	Move STRINGIFY to macros.h, use in language.h	2016-04-02 16:38:43 -07:00
Scott Lahteine	2ee599d873	Merge pull request #3321 from tnw513/fix_max_endstop ... Max endstops disabled for stock Prusa i3 Hephestos.	2016-04-02 16:38:10 -07:00
Scott Lahteine	4e1bbdb89f	Merge pull request #3320 from alhirzel/RCBugFix ... Fix manual Y movement on delta (regression).	2016-04-02 16:37:14 -07:00
Scott Lahteine	5fb88a2754	Merge pull request #3314 from jbrazio/bugfix/followup-3235 ... Fixes missing icons from status screen	2016-04-02 16:36:18 -07:00
Scott Lahteine	3c14c01a3a	Merge pull request #3310 from esenapaj/patch-2 ... Follow-up the commit a393941	2016-04-02 16:35:31 -07:00
RicardoGA	6b1d2263a2	Babystepping Fix	2016-04-02 14:53:57 -06:00
Silvio Didonna	dfe891fe11	changed filament diameter for consistency between all example config files.	2016-04-02 21:05:25 +02:00
Alexander Hirzel	6e0d627c8c	Unbreak the Delta radius clipping	2016-04-02 12:58:39 -04:00
Silvio Didonna	6c528e63eb	max endstops disabled. Stock Prusa i3 Hephestos have min endstops.	2016-04-02 16:54:59 +02:00
Alexander Hirzel	949172606f	Fix manual Y movement on delta (regression).	2016-04-02 10:48:13 -04:00
João Brázio	55a248d6b4	Fixes #3313 : Wrong board def in pins.h	2016-04-02 09:28:58 +01:00
João Brázio	04b2abb6aa	Fixes #3312: Missing all icons from status screen	2016-04-02 06:50:02 +01:00
esenapaj	81593cb3cb	Follow-up the commit a393941	2016-04-02 11:23:33 +09:00
Scott Lahteine	6a245fe4f7	Release 1.1.0-RC5	2016-04-01 19:14:49 -07:00
Scott Lahteine	e8f8a46ef5	Merge pull request #3303 from thinkyhead/rc_various_fixes ... Various patches for LCD menu issues	2016-04-01 18:02:25 -07:00
Scott Lahteine	b98f72b483	Small optimization for ftostr43	2016-04-01 17:54:16 -07:00
Scott Lahteine	a393941d2d	Combine "XYZ" with MSG_LEVEL_BED_HOMING	2016-04-01 17:51:03 -07:00
Scott Lahteine	097cc75ba8	Patch _lcd_level_bed draw to fix flicker, show proper offset	2016-04-01 17:51:03 -07:00
Scott Lahteine	1e1a18e091	Remove extra semicolon in ultralcd.cpp	2016-04-01 17:51:03 -07:00
Scott Lahteine	0b4f65dca8	Always limit blink to ~1 second intervals	2016-04-01 17:51:03 -07:00
Scott Lahteine	ffe054c129	Fix comment about host keepalive interval	2016-04-01 17:28:08 -07:00
Scott Lahteine	0d6609c3c5	lcd_goto_menu should set lcdDrawUpdate to 2	2016-04-01 17:07:40 -07:00
Scott Lahteine	af89ccf96a	Use flag to defer lcd return-to-status	2016-04-01 17:07:39 -07:00
Scott Lahteine	641b30217e	Patch prevEncoderPosition compile issue ... Thanks to @jbrazio #3301	2016-04-01 17:07:39 -07:00
Scott Lahteine	41aa4bdf1f	Use XYZ translated strings in dogm	2016-04-01 17:07:39 -07:00
Scott Lahteine	92882fcc51	Allow lcd_implementation_drawedit to draw a message	2016-04-01 17:04:33 -07:00
Scott Lahteine	0114cf1101	RCBugFix version string	2016-04-01 17:04:33 -07:00
Scott Lahteine	9c43369ebb	Merge pull request #3306 from thinkyhead/rc_fix_num2str ... Clean up num2str functions, extend ftostr43	2016-04-01 17:04:03 -07:00
Scott Lahteine	1da9d10173	Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants	2016-04-01 16:54:35 -07:00
Scott Lahteine	fcedfd6e99	Clean up num2str functions, extend ftostr43	2016-04-01 16:52:59 -07:00
Scott Lahteine	2512d8fd5e	Merge pull request #3304 from thinkyhead/rc_slow_buttons ... Macros for buttons, some cleanup for slow buttons	2016-04-01 15:31:54 -07:00
Scott Lahteine	f543aaa54e	Apply standard pin test to buttons ... This is the easiest way to make button pin testing consistent without renaming all the button pins. Just make a macro especially for testing if button pins are set, since they are named consistently in the pins files.	2016-04-01 15:12:12 -07:00
Scott Lahteine	f2ffc8b28b	Rename local slow_buttons for clarity	2016-04-01 15:06:33 -07:00
Scott Lahteine	26279fa43c	Merge pull request #3289 from esenapaj/patch-1 ... Update Kana font	2016-04-01 14:31:32 -07:00
Scott Lahteine	0bee67e5f1	Merge pull request #3294 from jbrazio/bugfix/mandatory-extrude-mintemp ... Fix an error when EXTRUDE_MINTEMP is not defined	2016-04-01 14:23:32 -07:00
João Brázio	709dd5aa4d	Fix an error when EXTRUDE_MINTEMP is not defined	2016-03-31 16:25:48 +01:00
Scott Lahteine	bc86ee0271	Simplify homeaxis with some macros	2016-03-30 18:44:05 -07:00
esenapaj	cc5059478a	Update Kana font	2016-03-31 10:02:47 +09:00
Scott Lahteine	82ef101ed5	Deploy & Stow in G29 for Delta + Z Servo Endstop	2016-03-30 16:41:16 -07:00
Scott Lahteine	33a9d32800	Merge pull request #3285 from thinkyhead/rc_fix_drawedit ... Fix string issues in ultralcd.cpp	2016-03-30 13:01:07 -07:00
Scott Lahteine	6a4d394fff	Fix pointer-to-string issues with set_home_offsets and _lcd_level_bed_homing	2016-03-30 12:32:25 -07:00
Scott Lahteine	de333c4fea	Merge pull request #3279 from thinkyhead/rc_filament_width_sensor ... FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR	2016-03-30 12:16:27 -07:00
Scott Lahteine	0f835c0c4e	Merge pull request #3259 from jbrazio/bugfix/old-ide-warning ... Show a warning message when Arduino IDE is prior to 1.5	2016-03-30 12:15:51 -07:00
Scott Lahteine	8def2c31db	Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0 ... Fix temperature checking conditions (backwards!)	2016-03-30 12:10:39 -07:00
Scott Lahteine	b919a6f182	Merge pull request #3280 from esenapaj/patch-1 ... Update U8glib URL	2016-03-30 12:06:53 -07:00
Scott Lahteine	8bf5f7c676	Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start ... M104 not starting the print timer	2016-03-30 11:54:16 -07:00
Scott Lahteine	31450ad498	Fix temperature checking conditions (backwards!)	2016-03-30 11:52:03 -07:00
João Brázio	187c183c20	M104 was not starting the print timer	2016-03-30 11:33:24 +01:00
esenapaj	352294b5f5	Update U8glib URL	2016-03-30 14:26:28 +09:00
Scott Lahteine	507aef055f	Patch broken M404	2016-03-29 20:54:31 -07:00
Scott Lahteine	1a79b13b7a	FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR	2016-03-29 20:54:31 -07:00
Scott Lahteine	7f81aa7ff3	Pins should always be defined (even for disabled features)	2016-03-29 20:44:14 -07:00
Scott Lahteine	5f32184254	Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo ... Echo all debug levels in M111, default to DEBUG_NONE	2016-03-29 20:34:31 -07:00
Scott Lahteine	05765fb570	Add DEBUGGING macro	2016-03-29 19:50:01 -07:00
Scott Lahteine	4402760739	Echo all debug levels in M111, default to DEBUG_NONE ... Redo of #3268 by @jbrazio	2016-03-29 19:18:45 -07:00
Scott Lahteine	f0b96f5cae	Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth ... Refinements, fixes, reduced stack usage in CardReader	2016-03-29 18:30:18 -07:00
Scott Lahteine	12c0bf9521	Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached ... M190 bed temp is never reached	2016-03-29 18:28:51 -07:00
João Brázio	c6577aea60	M190 bed temp was never reached	2016-03-30 01:03:20 +01:00
Scott Lahteine	ce0a9d3dc6	A picky fix of indentation in cardreader.cpp	2016-03-29 16:23:12 -07:00
Scott Lahteine	4ed8351e3d	Revert use of enqueue_and_echo_command_now	2016-03-29 16:23:12 -07:00
Scott Lahteine	70d1d4de5f	Small code spacing adjustments	2016-03-29 03:19:27 -07:00
Scott Lahteine	0385acea7a	Fix workDirParents -> getAbsFilename relationship	2016-03-29 03:18:53 -07:00
Scott Lahteine	27d70599d4	Change openFile default to "not-push" instead of "do-replace"	2016-03-29 03:16:35 -07:00
Scott Lahteine	372f93cc7a	Rename "filenames" to "proc_filenames"	2016-03-29 03:15:01 -07:00
Scott Lahteine	6b01cf07c2	Use only as much stack as needed for the M23 command	2016-03-29 02:34:33 -07:00
Scott Lahteine	9e520ae319	Merge pull request #3272 from thinkyhead/rc_filament_sensor_scope ... Minor cleanup to filament sensor code	2016-03-28 20:51:46 -07:00
Scott Lahteine	3252df7998	Minor cleanup to filament sensor code	2016-03-28 20:04:34 -07:00
Scott Lahteine	b60ea95adf	Keep blinking limited to LCD_UPDATE_INTERVAL	2016-03-28 19:41:13 -07:00
Scott Lahteine	e0ab06cfae	Merge pull request #3267 from thinkyhead/rc_command_args_null_oooops ... Cleanup, simplification of command dispatcher code	2016-03-28 18:54:00 -07:00
Scott Lahteine	0b8ef5eba6	Split get_command into units, rename to get_available_commands	2016-03-28 06:00:04 -07:00
Scott Lahteine	545f7997ea	Continue on empty lines instead of returning	2016-03-28 05:37:36 -07:00
Scott Lahteine	3dcf6d42ff	Don't store escaped serial characters if comment_mode	2016-03-28 05:37:36 -07:00
Scott Lahteine	5f8e52aefb	Minor cleanup to command dispatcher	2016-03-28 05:37:36 -07:00
jbrazio	0880fecbd4	Show a warning message when Arduino IDE is prior to 1.5	2016-03-28 11:55:42 +01:00
Scott Lahteine	f1ed310322	Add NUMERIC compare macros to simplify code	2016-03-28 03:52:49 -07:00
Scott Lahteine	3b2d159abd	Relax the test for "Heating failed" errors	2016-03-27 07:02:10 -07:00
Scott Lahteine	2e4ddd5c22	Merge pull request #3260 from jbrazio/cleanup/standardize-comment-style ... Formatted multi-line comments	2016-03-26 21:42:33 -07:00
jbrazio	443e6d26fe	Formatted multi-line comments	2016-03-27 04:36:36 +01:00
esenapaj	7950b5268a	Use SBI macro	2016-03-26 20:17:52 +09:00
Scott Lahteine	e4039a9b5b	Merge pull request #3250 from esenapaj/patch-1 ... Fix typo	2016-03-26 00:41:31 -07:00
Scott Lahteine	1d987cd280	Merge pull request #3253 from thinkyhead/rc_autotune_menu_optional ... Make the Autotune option(s) in the LCD menu optional	2016-03-26 00:32:05 -07:00
Scott Lahteine	d6f92f9efe	Remove Tonokip remnant from recent PR	2016-03-25 23:50:29 -07:00
Scott Lahteine	ab412a2153	PIDTEMPBED on #endif	2016-03-25 23:50:28 -07:00
Scott Lahteine	53cc6cca46	Formalize some dependencies on PIDTEMPBED	2016-03-25 23:50:28 -07:00
Scott Lahteine	5955a3063f	Sanity check PIDTEMPBED plus BED_LIMIT_SWITCHING	2016-03-25 23:50:28 -07:00
Scott Lahteine	67fabb6044	Merge pull request #3252 from thinkyhead/rc_keepalive_less ... Host Keepalive: Reduce frequency of "busy" messages	2016-03-25 23:37:02 -07:00
Scott Lahteine	d1bdd25b84	Merge pull request #3249 from esenapaj/patch-2 ... Update Japanese translation	2016-03-25 22:53:00 -07:00
Scott Lahteine	0d554c10ac	Merge pull request #3244 from ch100/RCBugFix ... Fixed backlight for PCF8575.	2016-03-25 22:50:20 -07:00
Scott Lahteine	cd4c3e90bc	Send a busy signal every 10 seconds instead of every 2	2016-03-25 22:15:40 -07:00
Scott Lahteine	8cb04816b5	Apply PID_AUTOTUNE_MENU option to ultralcd.cpp	2016-03-25 19:31:56 -07:00
Scott Lahteine	4b31c67dce	Add PID_AUTOTUNE_MENU option	2016-03-25 19:31:56 -07:00
Scott Lahteine	e08915a723	Fix comments in Configuration_adv.h	2016-03-25 19:31:31 -07:00
Scott Lahteine	26168676e7	Merge pull request #3246 from thinkyhead/rc_fix_numeric_filenames ... Fix: current_command_args skips digits at the front	2016-03-25 16:38:36 -07:00
esenapaj	f54315c728	Fix typo ... These are salvaged from closed-PR #3216.	2016-03-26 08:37:17 +09:00
esenapaj	37a0806420	Update Japanese trasration ... Follow the PR #3242.	2016-03-26 08:21:17 +09:00
Scott Lahteine	f423716c6a	Fix: current_command_args skips digits at the front ... Closes #3245	2016-03-25 16:12:41 -07:00
Christian Inci	627f39e1e3	Fixed backlight for PCF8575. ... Fixed backlight for PCF8575. Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>	2016-03-25 14:49:55 +01:00
Scott Lahteine	fc0baec991	Merge pull request #3240 from esenapaj/patch-1 ... Fix distribution date	2016-03-25 06:49:42 -07:00
Scott Lahteine	18de9f55ac	Merge pull request #3242 from thinkyhead/rc_epatel_mesh_fixes ... Updated Mesh Bed Leveling	2016-03-25 06:48:12 -07:00
Scott Lahteine	3a1e6b1752	Merge pull request #3243 from AnHardt/homed ... axis_known_position -> axis_homed	2016-03-25 06:36:46 -07:00
AnHardt	94962ee678	axis_known_position -> axis_homed ... In all these cases we want the axis to be homed. If we could have lost some steps is secondary. Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.	2016-03-25 14:05:20 +01:00
Edward Patel	14afe1a017	Move to Z=0 for G28 when using Manual Bed Leveling ... copy of 406992f9dd	2016-03-25 04:58:44 -07:00
Edward Patel	c606ed447a	Add "G29 S4" to fine tune Z level for Mesh Bed Leveling. ... Also add mbl.z_offset to the EEPROM, bumping the version to V23.	2016-03-25 04:58:43 -07:00
Scott Lahteine	5d8036e554	Code cleanup around MOTOR_CURRENT_PWM options	2016-03-25 04:23:46 -07:00
esenapaj	bec112de87	Fix distribution date	2016-03-25 18:56:16 +09:00
Scott Lahteine	f394c0639e	Merge pull request #3230 from jbrazio/bugfix/ultra-lcd-warning ... Fix a compiler warning in ultralcd.cpp	2016-03-25 01:14:54 -07:00
João Brázio	f077c7abbf	Fix dogm lcd error when FAN_PIN is defined as -1	2016-03-25 01:09:09 -07:00
Scott Lahteine	0da744b7b0	Further cleanup of comments, partial Doxygen-style ... Following up on #3231	2016-03-25 00:45:56 -07:00
Scott Lahteine	4823791eb0	Merge pull request #3228 from esenapaj/patch-1 ... Fix spelling	2016-03-25 00:40:51 -07:00
jbrazio	80f221ed11	Fixed: warning: extra tokens at end of #endif directive	2016-03-24 19:33:25 +00:00
jbrazio	5e5d250832	Added gplv3 header to all Marlin files	2016-03-24 18:01:20 +00:00
esenapaj	89a845659a	Fix spelling ... PROBABLE ->PROBEABLE This is follow-up to #3069?	2016-03-25 02:13:37 +09:00
Scott Lahteine	a6e39c1005	Release 1.1.0-RC4	2016-03-24 05:32:33 -07:00
Scott Lahteine	42ec1f39e7	Merge pull request #3207 from jbrazio/bugfix/toshiba-sdhc-flashair ... Toshiba Flash Air Wifi SD card support	2016-03-24 05:28:48 -07:00
Scott Lahteine	b6ca86b974	Merge pull request #3197 from PheiPheiPhei/RCBugFix ... Enabling servo usage on boards with PWM current control	2016-03-24 05:27:57 -07:00
Scott Lahteine	a6805ddf30	Merge pull request #3225 from yarda/fix-melzi-makr3d ... Fix MELZI_MAKR3D to use correct motherboard	2016-03-24 05:24:57 -07:00
Scott Lahteine	af32a7d5d6	M120/M121 also set endstops non-homing state	2016-03-24 03:24:23 -07:00
Scott Lahteine	04fa9d4f47	Make Autotune options into Menu Edit Items	2016-03-24 02:00:08 -07:00
WPBack	e3f583a3be	Fixes for PID AutoTune from menu ... Fixes for #3189 Setting a temp is still missing	2016-03-24 01:47:30 -07:00
WPBack	3b3e8a02b5	Initial implementation of PID Autotune Menu Items ... Adds the parameter U to M303. If U1 is included , it will use the PID-values from the auto-tune.	2016-03-24 01:46:37 -07:00
Scott Lahteine	da9d4c4caf	Merge pull request #3206 from esenapaj/patch-5 ... Follow-up the PR #3082, etc	2016-03-24 00:20:25 -07:00
Scott Lahteine	c5857f96c8	Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf ... Add support for Printrboard RevF	2016-03-24 00:12:06 -07:00
Scott Lahteine	f774420488	Merge pull request #3196 from thinkyhead/rc_controllerfan_bug ... Make DISABLE_INACTIVE_X, etc., true if missing	2016-03-24 00:11:46 -07:00
Scott Lahteine	7d55d86081	Merge pull request #3219 from AnHardt/RH-pos-update ... Send position updates to RH	2016-03-23 23:20:24 -07:00
Scott Lahteine	7ea4e095ad	Merge pull request #3220 from thinkyhead/rc_tori_spelling ... Patch minor spelling error in cn, en, gl language file headings	2016-03-23 22:43:11 -07:00
Scott Lahteine	bcbac698f2	Patch minor spelling issue in cn, en, gl language file headings	2016-03-23 22:30:07 -07:00
Scott Lahteine	49ed4696ea	Merge pull request #3218 from AnHardt/lost-pin-undef ... Fix lost undef Y_MAX_PIN in pins.h	2016-03-23 21:37:51 -07:00
Scott Lahteine	7112f2e41a	Merge pull request #3204 from esenapaj/patch-3 ... Change link to the document	2016-03-23 20:56:52 -07:00
AnHardt	1c6a16d5bb	Send position updates to RH ... Send position updates to RH where RH can not know the end position. For example after G28 RepetierHost assumes to be at the homing-point, but with a servo probe we are much higher. Now the RH-software-endstops will prevent us from going down (if activated). With this patch the internal position of RH is updated with `current_position[]`.	2016-03-23 13:30:50 +01:00
AnHardt	1b336971ae	Fix lost undef Y_MAX_PIN in pins.h	2016-03-23 12:48:06 +01:00
AnHardt	ba4eebad2f	Fix Fan KICKSTART ... Sorting ot what else belongs to what if was not so hard. But the static `ms = ms = millis();` was a bit surpising.	2016-03-23 12:08:02 +01:00
Scott Lahteine	cbce025248	Merge pull request #3217 from thinkyhead/rc_updated_kana ... Patch-up to commits for Kana #3203. Closes #3203.	2016-03-23 02:46:26 -07:00
esenapaj	665338bb69	Update Japanese translation	2016-03-23 02:43:53 -07:00
AnHardt	6486e8b74a	Call buzz() directly from M428	2016-03-22 15:05:04 +01:00
jbrazio	757661b299	Toshiba Flash Air Wifi SD card support	2016-03-22 11:42:11 +00:00
esenapaj	fc75e6f92d	Follow-up the PR #3082, etc ... Follow-up the PR #3082 Follow-up the commit 143ad74: unnoticed updates Fix for commit b0f5ba0: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind Standardize the writing method: Z-probe, z-probe -> Z Probe Adjust spacing	2016-03-22 20:22:01 +09:00
esenapaj	22299c13c1	Change link to the document ... documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757, but http://www.marlinfirmware.org/ isn't working.	2016-03-22 19:58:41 +09:00
PheiPheiPhei	adb5375a09	Enabling servo usage on boards with PWM current control ... Enabling servo usage on boards with PWM current control timer5 is used by some boards like the Mini Rambo for controlling motor current via PWM, see stepper.cpp. ```cpp #ifdef MOTOR_CURRENT_PWM_XY_PIN pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT); pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT); pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT); digipot_current(0, motor_current_setting[0]); digipot_current(1, motor_current_setting[1]); digipot_current(2, motor_current_setting[2]); //Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise) TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50); #endif } ``` Using the same timer for controlling servos results in loss of motor control. So use timer4/3 for those boards instead. [See discussion here.](http://shop.prusa3d.com/forum/software-f13/enabling-auto-leveling-in-firmware-t416-s40.html)	2016-03-22 00:56:31 +01:00
jbrazio	04e57e2b5e	Update the Hephestos 2 default config	2016-03-21 18:20:29 +00:00
esenapaj	f260e00a72	fix spelling ... Thermister -> Thermistor	2016-03-21 20:57:03 +09:00
Scott Lahteine	b1a3a95ad4	Tweak controllerFan to save a cycle or two	2016-03-20 22:11:09 -07:00
Scott Lahteine	04a6924633	Make DISABLE_INACTIVE_X, etc., the same as DISABLE_X (etc.) if missing	2016-03-20 22:10:52 -07:00
Scott Lahteine	15fccd43ee	Fix spacing of an #endif	2016-03-20 20:32:55 -07:00
Scott Lahteine	be08eb6153	Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8 ... Add pt_pt-utf8 language pack and fix some minor compiler warnings	2016-03-20 17:42:45 -07:00
Scott Lahteine	d1ff7959b7	Merge pull request #3188 from esenapaj/patch-1 ... follow-up the commit b82d91e	2016-03-20 17:39:52 -07:00
Scott Lahteine	10caee2b7c	Merge pull request #3187 from AnHardt/target_extruder_number ... Fix extrudernum in MSG_INVALID_EXTRUDER	2016-03-20 17:15:22 -07:00
Scott Lahteine	1cc316f1fd	Merge pull request #3082 from thinkyhead/updated_2820 ... This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.	2016-03-20 17:10:38 -07:00
Scott Lahteine	7bf5d117e7	Merge pull request #3069 from thinkyhead/rc_delta_compat_m48 ... Delta-compatible extensions to M48	2016-03-20 17:09:18 -07:00
Scott Lahteine	db8ab50c66	Merge pull request #3192 from tnw513/fix_lang ... Added missing translations.	2016-03-20 17:07:00 -07:00
Scott Lahteine	06332f20be	Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter ... Stop print timer with M105/M109	2016-03-20 17:05:07 -07:00
jbrazio	92a7d4515a	Missing coma comment correction for the default cofig file	2016-03-20 23:23:11 +00:00
jbrazio	1aa531a3db	Missing coma comment correction for all config files	2016-03-20 23:21:45 +00:00
jbrazio	68dda08fff	Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs	2016-03-20 23:14:24 +00:00
Silvio Didonna	f8c10d6b0e	Added missing translations.	2016-03-20 22:34:00 +01:00
esenapaj	468df96b0f	follow-up the commit b82d91e ... follow-up the commit b82d91eca6	2016-03-20 20:57:14 +09:00
AnHardt	338b69c24b	Fix extrudernum in MSG_INVALID_EXTRUDER ... SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.	2016-03-20 11:39:06 +01:00
AnHardt	b39b54031b	Fix KEEPALIVE_STATE ... Add return to NOT_BUSY for M105 Replace WAIT_FOR_USER with PAUSED_FOR_USER Add Travis test for FILAMENTCHANGEENABLE	2016-03-20 10:41:56 +01:00
Scott Lahteine	32f75749e4	Merge pull request #3117 from Blue-Marlin/thermal-protection ... Improve the descriptions for THERMAL_PROTECTION	2016-03-19 23:41:05 -07:00
esenapaj	37eaa1406b	follow-up the PR #3180	2016-03-20 15:33:02 +09:00
esenapaj	198d5d56fd	follow-up the PR #3183	2016-03-20 13:58:05 +09:00
Scott Lahteine	4119cef32f	Merge pull request #3180 from clexpert/RCBugFix ... Czech language specific changes	2016-03-19 20:18:05 -07:00
Scott Lahteine	da94bcfebb	Merge pull request #3184 from thinkyhead/fix_command_injection ... Patch drain_queued_commands_P	2016-03-19 20:12:16 -07:00
Scott Lahteine	41145e6e81	Patch drain_queued_commands_P ... Fix a SNAFU that should have been caught in #3012	2016-03-19 20:10:41 -07:00
Scott Lahteine	3ce0c5063f	Merge pull request #3183 from thinkyhead/rc_lcm1602_support ... Also closes #3181.	2016-03-19 19:28:50 -07:00
CoderSquirrel	eda95d8bed	Add support for LCM1602 16x2 I2C LCD adapter	2016-03-19 19:26:44 -07:00
Scott Lahteine	59483221d5	Move stepper DAC to a separate file	2016-03-19 19:24:26 -07:00
Scott Lahteine	5d0570cea0	Make digitalPotWrite depend on HAS_DIGIPOTSS	2016-03-19 19:24:26 -07:00
Scott Lahteine	f96bc03081	Add M907-M910 g-codes support for Printrbot Rev. F	2016-03-19 19:24:26 -07:00
Stephanie	6843b78f99	Add support for Printrboard RevF ... The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control. The Pins file for the RevF board is included.	2016-03-19 16:43:37 -07:00
Petr Zahradnik	98392782ea	Update Configuration.h	2016-03-19 20:45:13 +01:00
Petr Zahradnik	daa52124b0	Update language_cz.h	2016-03-19 20:43:28 +01:00
Blue-Marlin	3166aed087	Improve the descriptions for THERMAL_PROTECTION	2016-03-19 14:08:59 +01:00
Scott Lahteine	a02ae36ae8	Include M65 "ABC" parameters in EEPROM ... Addressing #2773	2016-03-19 05:52:20 -07:00
Scott Lahteine	cf7c444aff	Apply unknown_position_error elsewhere	2016-03-19 05:13:40 -07:00
Scott Lahteine	eda5190581	Check for known position in M48	2016-03-19 05:13:40 -07:00
Scott Lahteine	68085ca855	Updated M48 friendly for DELTA ... Partial implementation with reference to MarlinFirmware/Marlin#3011	2016-03-19 05:13:40 -07:00
Scott Lahteine	6a3529247f	"Homing" as a translatable string	2016-03-19 04:41:03 -07:00
Scott Lahteine	c97c2dcaf7	Use const parameters instead of static casting ... Alternative fix to #3149	2016-03-19 03:36:53 -07:00
Scott Lahteine	38b0082bf2	Additional tweaks to M42 exit conditions	2016-03-19 03:10:18 -07:00
Scott Lahteine	4bbea5124d	Support for multiple PWM fans	2016-03-19 03:10:18 -07:00
Scott Lahteine	637cc03686	Fix M109 so it won't wait for cooling ... Addressing issue #2767	2016-03-19 03:00:58 -07:00
AnHardt	3f45a1acf9	Check probes only when deployed ... Aim: Test probes in update_endstops only when activated Changes: Configurations Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message. Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin Add some comments Shift some entries to have related things together. Conditionals.h We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined. SanityCheck.h Add some tests if the probe is connected and if we have defined a probe. stepper.cpp Changes to test the probe only when it is deployed (z_probe_is_active). Test update_endstops() when the probe is deployed. MarlinMain.cpp a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled() b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions. d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop. To do: In another PR. handle all probes in deploy/stow_z_probe. Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.	2016-03-19 02:00:08 -07:00
Scott Lahteine	4634feaeab	Merge pull request #3012 from thinkyhead/fix_command_injection ... Use a serial line buffer to prevent queue corruption	2016-03-19 01:43:54 -07:00
Scott Lahteine	9bf87aac6a	Merge pull request #3127 from thinkyhead/rc_core_babystepping ... Implement BABYSTEPPING for COREXY and COREXZ	2016-03-18 23:25:26 -07:00
Scott Lahteine	4ae03df5c2	Merge pull request #3109 from thinkyhead/rc_host_keepalive ... Provide feedback to hosts when busy	2016-03-18 23:22:29 -07:00
Scott Lahteine	963a92ceda	Patch idle forevermore	2016-03-18 22:38:35 -07:00
Scott Lahteine	7ec7bb31c4	Send a Busy signal to hosts during long processes, wait for input, etc ... If Marlin is blocking the serial input or command queue for any length of time (for example more than 2 seconds), it needs to send a message to serial out to inform the host that it is busy. Marlin should only send these messages out when busy, and preferably not when trying to print formatted output.	2016-03-18 22:38:35 -07:00
esenapaj	8d580ea7e8	follow-up the PR #3114 ... follow-up the commit d56c6af24e	2016-03-19 13:17:34 +09:00
Scott Lahteine	d9e1f22682	BABYSTEPPING requires ULTRA_LCD	2016-03-18 18:22:53 -07:00
Scott Lahteine	e5fd43f343	Implement BABYSTEPPING for COREXY and COREXZ	2016-03-18 18:22:53 -07:00
Scott Lahteine	80277cc9c8	drain_queued_commands_P now returns true if there are more	2016-03-18 17:56:48 -07:00
Scott Lahteine	8fe7420310	Use a separate serial line buffer	2016-03-18 16:46:20 -07:00
Scott Lahteine	7d25c107a8	Merge pull request #3149 from esenapaj/patch-1 ... suppress warnings	2016-03-18 15:40:14 -07:00
Scott Lahteine	d56c6af24e	Merge pull request #3114 from thinkyhead/rc_reverse_lcd_menu ... Option to reverse the click-wheel direction in menus	2016-03-18 15:39:29 -07:00
Scott Lahteine	cc291aeb3c	Move definition of "blink" to main ultralcd file	2016-03-17 18:19:05 -07:00
Scott Lahteine	e7e1866589	Merge pull request #3161 from Alex9779/fix_InitialExtruderDirection ... Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first	2016-03-16 12:58:10 -07:00
Scott Lahteine	57e82cacc9	Merge pull request #3156 from esenapaj/patch-3 ... Fix CardReader::lsDive()	2016-03-16 12:48:22 -07:00
Alexander Leisentritt	4338813814	save last extruder and set stepper directions too in case the extruder changed ... fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083	2016-03-16 20:20:34 +01:00
Scott Lahteine	8f24475e02	Simplify limiting encoderLine in END_MENU	2016-03-16 04:05:41 -07:00
Scott Lahteine	fbef2f5b61	Implement reverse menu direction in ultralcd.cpp	2016-03-16 04:03:49 -07:00
Scott Lahteine	b8b51d8da8	Add the REVERSE_MENU_DIRECTION option	2016-03-16 04:02:40 -07:00
Scott Lahteine	999a76dbdf	Merge pull request #3157 from esenapaj/patch-4 ... Use variable in lcd_erase_line()	2016-03-16 02:46:42 -07:00
Scott Lahteine	e8fa843c2d	Merge pull request #3164 from epatel/epatel/RCBugFix ... Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z	2016-03-16 02:40:54 -07:00
Scott Lahteine	fc04b587cf	Merge pull request #3147 from thinkyhead/rc_stringify_macro ... Promote STRINGIFY to macros.h	2016-03-15 17:37:03 -07:00
Scott Lahteine	d7c6fd5c2f	Merge pull request #3146 from thinkyhead/rc_enabled_true_false ... Support "true" and "false" in the ENABLED macro	2016-03-15 17:35:55 -07:00
Edward Patel	cb0dbfa3b5	Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z	2016-03-16 01:26:00 +01:00
esenapaj	a15c5d222a	Use variable in lcd_erase_line() ... lcd_erase_line() is called with argument, but the argument is ignored by lcd_erase_line().	2016-03-16 02:59:06 +09:00
esenapaj	609c0d46d9	Fix CardReader::lsDive() ... If comparison between signed char(-128 ~ +127) and DIR_NAME_DELETED(uint8_t const 0XE5, it's +229), it makes incorrect result.	2016-03-16 02:47:58 +09:00
Scott Lahteine	2ef49a9d53	Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT ... Addition to #3140	2016-03-15 03:49:44 -07:00
Scott Lahteine	eb8cf29464	Merge pull request #3151 from hydrocat/RCBugFix ... Uptades the pt-br translation	2016-03-15 02:46:46 -07:00
Scott Lahteine	6e1bc03d3b	Additional wrapping for #3140	2016-03-15 01:18:58 -07:00
Scott Lahteine	cc9968f893	Patch spacing in #3140	2016-03-15 01:18:58 -07:00
Scott Lahteine	1c384930f3	Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion ... Wrap macros to prevent bad expansions	2016-03-15 00:25:34 -07:00
VITORIO MIGUEL PRIETO CILIA	de2cca73ac	Uptades the pt-br translation	2016-03-14 21:16:57 -03:00
esenapaj	a4314c4907	Use local variable in recalc_delta_settings() ... diagonal_rod hadn't been used anywhere.	2016-03-15 06:47:27 +09:00
esenapaj	8de7a6f9b1	suppress warnings	2016-03-15 06:34:02 +09:00
Scott Lahteine	9418b4f2f3	Promote STRINGIFY to macros.h	2016-03-13 23:15:17 -07:00
Scott Lahteine	4b648793f2	Use ENABLED with DISABLE_[INACTIVE_][XYZ]	2016-03-13 22:15:45 -07:00
Scott Lahteine	73a59a4e45	Allow ENABLED(b) to work with "true" and "false"	2016-03-13 22:15:01 -07:00
Blue-Marlin	c73f1b2471	Extend stack_overflow_protection for lcd_move_e and _lcd_level_bed ... Extend stack_overflow_protection for lcd_move_e() and _lcd_level_bed() with a refined method of 3050.	2016-03-13 13:59:44 +01:00
Scott Lahteine	f4a3efd35e	Merge pull request #3116 from thinkyhead/rc_fix_value_edit_bug ... Fix value edit click bug	2016-03-13 04:08:43 -07:00
Scott Lahteine	3f5fbbd398	Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography ... Update the bed topography output done by G29	2016-03-13 03:51:43 -07:00
Scott Lahteine	c16c47954c	Merge pull request #3141 from esenapaj2/RCBugFix ... follow-up the PR #3131	2016-03-13 03:37:39 -07:00
Scott Lahteine	30c3a21d1f	Merge pull request #3112 from thinkyhead/rc_support_MAX31855	2016-03-13 03:30:48 -07:00
Scott Lahteine	81d759efb6	Merge pull request #3138 from jbrazio/bugfix/m109-r-could-wait-forever	2016-03-13 03:26:34 -07:00
Scott Lahteine	2179f598bf	Merge pull request #3122 from thinkyhead/rc_group_filament_change	2016-03-13 03:25:38 -07:00
Scott Lahteine	62a9b9902d	Merge pull request #3133 from thinkyhead/rc_machine_uuid_in_m115	2016-03-13 03:23:54 -07:00
Scott Lahteine	f928894c38	Merge pull request #3132 from thinkyhead/rc_heating_failed_err	2016-03-13 03:23:14 -07:00
esenapaj2	236a44c83b	follow-up the PR #3131 ... follow-up the commit 7326d63ce0 update Configration_adv.h of Hephestos2 delete unnecessary spaces	2016-03-13 19:12:39 +09:00
Scott Lahteine	f9ded2a7c4	Wrap macros to prevent bad expansions	2016-03-12 22:38:55 -08:00
jbrazio	a645860431	All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()	2016-03-12 07:16:39 +00:00
jbrazio	1981e53d68	M109 R option if misused could cause a wait-forever situation	2016-03-12 06:24:24 +00:00
Scott Lahteine	7976e29399	Use MACHINE_UUID in M115 ... Addressing #2879. The M115 report should display `MACHINE_UUID` but it always displays `UUID`.	2016-03-11 05:34:48 -08:00
Scott Lahteine	81aab828e2	Fix a "Heating failed" error ... Addressing #3085. If the target_temperature is set directly it never invokes or disables the timer set in `start_watching_heater`, so after _stopping a print_ or turning off _all heaters_ you could get a “Heating failed” error.	2016-03-11 05:07:48 -08:00
Scott Lahteine	0c48eaf3de	Expose motor current in more configs, disable by default	2016-03-11 02:25:36 -08:00
Elijah Snyder	e8b10d2836	Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT	2016-03-11 02:25:36 -08:00
João Brázio	4d4a842cfb	Update the bed topography output done by G29	2016-03-10 13:24:17 +00:00
Scott Lahteine	89838cdb10	Move step macros to stepper_indirection.h	2016-03-10 04:34:55 -08:00
João Brázio	793cd0ae3b	Clean up the code a bit	2016-03-10 11:52:43 +00:00
Scott Lahteine	27f244ba2c	Support MAX31855 as Temperature Sensor -3	2016-03-10 02:49:54 -08:00
Scott Lahteine	ce639b8b03	Group FILAMENT_SENSOR options together	2016-03-10 02:41:37 -08:00
Scott Lahteine	3fd31976c3	Reduce code in stepper.cpp with macros	2016-03-10 01:42:58 -08:00
Scott Lahteine	b45a0c4c60	Fix bugs in edit submenus so they return to origin ... Expected behavior: After editing a value the menu should return to the previous place with the edited item selected. Actual behavior: Either the top (back) item from the previous screen is selected, or the menu jumps up another level. Solution: Pass the correct arguments to `lcd_goto_menu` on click when editing a value.	2016-03-09 21:06:56 -08:00
jbrazio	986b508ff7	Print timer now stops when it sees the last extruder temperature being shutdown	2016-03-08 18:11:02 +00:00
AnHardt	fd5414c6ea	Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING ... rebased corrected spelling changed to #elif for error Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.	2016-03-08 17:50:23 +01:00
Scott Lahteine	b7928a000a	Merge pull request #3108 from AnHardt/M110+ ... M110 and M29 rework	2016-03-08 03:54:07 -08:00
Scott Lahteine	5cba0b4187	Merge pull request #3111 from thinkyhead/rc_drop_old_condition ... Drop obsolete test for leading "N"	2016-03-08 03:07:25 -08:00
Scott Lahteine	302d1bfbc4	Drop obsolete test for leading "N"	2016-03-08 02:25:11 -08:00
AnHardt	37b857e8ec	M110 ang M29 rework ... Add 'ok' output for G29 actually closing the file. Handle M110 when received without linenumber/checksumm.	2016-03-07 22:27:01 +01:00
esenapaj2	29e09c7c3e	update example configurations ... update old comments update or delete deprecated definitions complement forgotten updates adjust spacing some cosmetic changes	2016-03-07 22:03:33 +09:00
Scott Lahteine	fac85f6fa1	Merge pull request #3102 from jbrazio/bugfix-g28-multiple-z-movements ... Bugfix: G28 was lifting Z-axis multiple times	2016-03-07 03:52:00 -08:00
jbrazio	642e3699ce	Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero	2016-03-07 03:49:11 +00:00
Scott Lahteine	501f63802a	Merge pull request #3077 from Blue-Marlin/watchdogreset-in-kill ... Add Watchdog timer reset in kill()	2016-03-06 16:21:39 -08:00
Scott Lahteine	1002eb67c8	Update name of st_get_axis_position_mm in stepper.h	2016-03-06 15:46:39 -08:00
Jaroslav Škarvada	d229c58df6	Fixed Makefile to work with Melzi2 boards on arduino-1.6.x ... - also by default use ${HOME}/Arduino as install directory which may be more sane, especially with arduino packages provided by distributions - bump arduino version to 106 (this seems to be useless) - program firmware through the USB serial which is more comfortable way how to program the firmware - use 57600 programing speed by default which seems to be more reliable with arduino bootloaders (at least with those shipped with the Melzi2 boards) Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>	2016-03-06 20:12:01 +01:00
Jaroslav Škarvada	7dde761aa6	Fix MELZI_MAKR3D to use correct motherboard ... Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>	2016-03-06 19:33:33 +01:00
Scott Lahteine	eafbc5e0cc	Add AJ4P pins and fix RAMBO pins	2016-03-06 05:52:01 -08:00
Scott Lahteine	cf792fd8d8	Update configurations to use RAMPS 1.4	2016-03-06 05:52:01 -08:00
Scott Lahteine	cacf04f8a7	Base RAMPS-like boards on RAMPS 1.4	2016-03-06 05:52:00 -08:00
Scott Lahteine	50e3482e0a	Handle RAMPS 1.3 as the special case	2016-03-06 05:52:00 -08:00
Scott Lahteine	679be3294f	Rename RAMPS 1.3 pins for RAMPS 1.4	2016-03-06 05:52:00 -08:00
Scott Lahteine	f18d3f451a	Limit LCD move_to_x/y coordinates for deltas ... Related to MarlinFirmware/MarlinDev#270	2016-03-06 05:52:00 -08:00
Scott Lahteine	988332c67a	Cosmetic tweaks from dev	2016-03-06 05:52:00 -08:00
Scott Lahteine	2690d8568e	DOGLCD width/height in Conditionals.h	2016-03-06 05:51:59 -08:00
Scott Lahteine	614febaaf3	Fix acceleration limits ... See: https://github.com/Ultimaker/Marlin/pull/7	2016-03-06 05:51:59 -08:00
Scott Lahteine	13ef12ad3f	Fix power calculations ... As suggested by @max-pau in #3073 - #3074	2016-03-06 05:51:59 -08:00
Scott Lahteine	e2b022cce2	Include #3053	2016-03-06 05:51:59 -08:00
Scott Lahteine	5cba0210f2	Small patch to Z_SAFE_HOMING comment	2016-03-06 05:51:58 -08:00
Scott Lahteine	6165fd41a5	Fix Hephestos 2 and other configs	2016-03-06 05:51:58 -08:00
Scott Lahteine	71718d888a	Fix typos in check_axes_activity	2016-03-06 05:51:58 -08:00
Lukas Abfalterer	83795d3e63	deleted double used comments	2016-03-06 05:51:58 -08:00
jbrazio	143ad74db7	Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config ... files.	2016-03-06 05:51:58 -08:00
jbrazio	b0f5ba0232	Update the PROBE_OFFSET_FROM_EXTRUDE comment section ... This changes have being discussed at MarlinFirmware/Marlin#2849.	2016-03-06 05:51:57 -08:00
jbrazio	02b131b552	Replaced stock BQ PID values with fine tuned ones generated using M303	2016-03-06 05:51:57 -08:00
jbrazio	45dc8a51f3	Added readme file for bqh2 and disabled the SLOWDOWN config flag	2016-03-06 05:51:57 -08:00
Scott Lahteine	6a21180bd4	Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3	2016-03-06 05:51:57 -08:00
jbrazio	b18816fcbf	Fine tuned XYJERK. ... Disallowed the Z_PROBE_OFFSET_RANGE_MAX to be greater than zero.	2016-03-06 05:51:57 -08:00
jbrazio	be83036212	Applying suggestions by @thinkyhead at MarlinFirmware/Marlin#3049. ... - Remove the forced activation of SDSUPPORT, I guess people may use the ZUM 3D board and not the LCD module. - Fixed the tab issue within boards.h file.	2016-03-06 05:51:56 -08:00
jbrazio	b82d91eca6	Added configuration example for the BQ Hephestos 2 3D printer. ... Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.	2016-03-06 05:51:56 -08:00
Scott Lahteine	45bcc43e48	Don't override SOURCE_CODE_URL in Default_Version.h ... - Defining `SOURCE_CODE_URL` in `Default_Version.h` overrides it elsewhere. So don’t define it there. - Also fix up `language.h` so no `#undef` will be needed.	2016-03-06 05:51:56 -08:00
Scott Lahteine	ef68c1910c	Check that the temperature is close to target	2016-03-06 05:51:56 -08:00
Scott Lahteine	ea9fd1200b	Fix M109 so it won't wait for cooling ... Addressing issue #2767	2016-03-06 05:51:56 -08:00
Scott Lahteine	e4945b30d2	sbi and cbi are deprecated	2016-03-06 05:51:55 -08:00
Scott Lahteine	ff13070b59	Use _BV macros, patch up others	2016-03-06 05:51:55 -08:00
Scott Lahteine	209f5f21e0	Use macros where possible ... Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros wherever possible.	2016-03-06 05:51:55 -08:00
Scott Lahteine	c8f76bb8aa	Create BITSET/BITCLR macros	2016-03-06 05:51:55 -08:00
Scott Lahteine	adc25db8c4	Merge pull request #3005 from thinkyhead/rcbugfix_eeprom ... Fix layout descr. in configuration_store.cpp	2016-03-06 00:31:44 -08:00
Scott Lahteine	e7cf85b922	Merge pull request #3013 from thinkyhead/esenapaj-patch-1 ... Enhanced #3010 - formal Mesh/Manual dependency	2016-03-06 00:30:02 -08:00
Scott Lahteine	6e64895c30	Merge pull request #3001 from AlwaysTinkering/RCBugFix ... Rc bug fix - Fix for issue #2931	2016-03-06 00:20:29 -08:00
Scott Lahteine	34b8b9f0f5	Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz ... Add CORE support to st_get_position_mm (and elsewhere)	2016-03-06 00:17:03 -08:00
Scott Lahteine	1e20949afb	Merge pull request #3092 from thinkyhead/rc_2860_printrbot_lcd ... Fix Printrboard with LCD (redo)	2016-03-06 00:14:29 -08:00
Scott Lahteine	f5972c4d2c	Merge pull request #2994 from AnHardt/Inerrup-save-serial ... Interrupt safe serial --- Guard against non-atomic variable changes from interrupt routines	2016-03-05 22:25:12 -08:00
Scott Lahteine	3a3d358df9	Fix Printrboard with LCD (redo) ... Based on #2860 - rebased for RCBugFix	2016-03-05 22:13:00 -08:00
Scott Lahteine	eb85342fd9	Merge pull request #2989 from AnHardt/fix2661 ... Pre home display - Stepper release	2016-03-05 21:30:17 -08:00
Scott Lahteine	14f3ca1b2e	Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix ... Apply bed leveling matrix when switching extruders	2016-03-05 21:23:25 -08:00
Scott Lahteine	91fcdc2b99	Merge pull request #3090 from thinkyhead/rc_spelling ... Various minor spelling corrections	2016-03-05 20:50:34 -08:00
Scott Lahteine	772460a7b8	Various minor spelling corrections ... Redo of #2939 rebased against RCBugFix	2016-03-05 20:41:15 -08:00
lrpirlet	0fb507a75d	correct raise_z_for_servo	2016-03-05 20:19:53 -08:00
Scott Lahteine	04a0d45c22	Merge pull request #2821 from MarlinFirmware/ReinitializeDisplay ... Fix status LEDs update when reinitializing the display	2016-03-05 15:31:49 -08:00
Blue-Marlin	b4e5e0f11d	Add Watchdog reset in kill() ... Add watchdog reset in the kill loop to simplify recovering.	2016-03-04 00:35:18 +01:00
Scott Lahteine	547d35a921	Merge pull request #3067 from Blue-Marlin/ALARM_PIN ... Remove unused ALARM_PIN	2016-03-02 20:20:26 -08:00
Scott Lahteine	79778d46d9	Merge pull request #3066 from Blue-Marlin/Fix-disable_all_heaters() ... Fix disable_all_heaters() for MAX6675	2016-03-02 17:35:08 -08:00
Blue-Marlin	a68228bf55	Remove unused ALARM_PIN ... Remove unused ALARM_PIN from all the Configuration.h's	2016-03-02 14:29:49 +01:00
Scott Lahteine	9eb4aceee4	Merge pull request #2986 from thinkyhead/enable_watchdog ... Enable USE_WATCHDOG by default	2016-03-02 05:29:42 -08:00
Blue-Marlin	0631541166	Fix disable_all_heaters() for MAX6675	2016-03-02 14:17:23 +01:00
Scott Lahteine	222d13d5ed	Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset ... Code cleanup in gcode_T	2016-03-02 03:45:40 -08:00
Scott Lahteine	186629aee8	Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix ... Fix Z_RAISE_AFTER_PROBING for non DELTA printers	2016-03-02 03:14:27 -08:00
Scott Lahteine	a42fb35c56	Merge pull request #3050 from Blue-Marlin/fix-1166 ... Temporary workaround for stack overflow	2016-03-01 11:33:19 -08:00
jbrazio	67e15aac3d	As pointed out by @Blue-Marlin the previous code would raise the Z axis ... twice for a servo based probe.	2016-03-01 00:22:48 +00:00
jbrazio	17cc2a9663	Z_RAISE_AFTER_PROBING value was being ignored by Marlin because ... raise_z_after_probing() was only called if the printer type was set to a DELTA or if the printer had a docking sled for the probe.	2016-02-29 15:48:26 +00:00
Scott Lahteine	252f4a75cd	Merge pull request #3043 from oxivanisher/RCBugFix ... Example configuration for Kossel XL	2016-02-28 23:57:13 -08:00
Scott Lahteine	fd1243c184	Merge pull request #3052 from thinkyhead/rc_fix_m145_eeprom_output ... Fix "M145" output in M503 report	2016-02-28 23:43:08 -08:00
Scott Lahteine	0bc648353f	Merge pull request #3031 from tnw513/RCBugFix ... Fix board type for Hephestos: RAMPS 1.4	2016-02-28 23:23:01 -08:00
AnHardt	f27c2b6b4b	Reimplement #2892 ... Include #2892 to fix the isHeating symbol in the extruder graphics	2016-02-28 23:20:30 +01:00
AnHardt	615bec2329	Activate warning about possible reduced accuracy by default ... Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING` Changed the condition for blinking from ``` #if ENABLED(WARN_REDUCED_ACCURACY) ``` to ``` #if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) ```	2016-02-28 23:20:21 +01:00
AnHardt	1c889cd303	Refresh previous_cmd_ms during run_z_probe() ... Refresh previous_cmd_ms during run_z_probe() to prevent: stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME and extrudes for expired EXTRUDER_RUNOUT_SECONDS (https://github.com/MarlinFirmware/MarlinDev/issues/238)	2016-02-28 23:20:12 +01:00
AnHardt	4b02f33e69	Distribute config-changes to the other configurations	2016-02-28 23:20:04 +01:00
AnHardt	be24fdacea	The same changes to the axis-letters now for the char-displays ... Exactly the same - copy/paste.	2016-02-28 23:19:54 +01:00
AnHardt	5b0f659355	Changes for graphics displays ... Replaced displaying "---" instead of the value of a coordinate when unhomed or with reduced precision with blinking the coordinate-prefix-character ('X','Y','Z'). For "unhomed" a '?' is shown every second second - until that axis is homed. The value displayed is, as before the "---" where displayed, the relative to the reset position coordinate value. When the axis stepper was disabled, now we can display a hint on that, by showing a blinking ' ' instead of the axis letter, when WARN_REDUCED_ACCURACY is defined. I suppose the code itself is here the better documentation. A '+/-' character is in non of our charsets so i decided for a '?' for now to reduce the work. There is no additional space on the displays one could use to display the information, so replacing something is the only option. As the axis letters are totally redundant with their positions on the display they contain the least information. So my decision was to overwrite them.	2016-02-28 23:19:32 +01:00
AnHardt	32ae9f9ab7	Fix stepper shutdown during waiting for temperatures ... In the wait loops of M109 M190 idle() is called, what checks stepper_inactive_time against previous_cmd_ms. Because we can be several minutes inside the loop, resetting previous_cmd_ms only outside the loop caused stepper shutdowns. The name of previous_cmd_ms does not really reflect its use. It's set not only when a new command was received or executed but also in many of the movement routines. For that the little extension of using it during the wait will (hopefully) not hurt. # Conflicts: # Marlin/Configuration_adv.h	2016-02-28 16:58:50 +01:00
AnHardt	b6e69e71ce	Make stepper shutdown after inactivity dependent ... Make stepper shutdown after inactivity dependent on a new set of #defines. DISABLE_INACTIV_X DISABLE_INACTIV_Y DISABLE_INACTIV_Z DISABLE_INACTIV_E And make exemplaric Configuration. Names can be discussed. This makes the disabling of the steppers independent from the DISABLE_? settings witch shut down the steppers immediately.	2016-02-28 16:58:42 +01:00
AnHardt	051325ccd7	Introduce axis_homed ... Introduce additional variable axis_homed to replace axix_known_position when the coordinate display should indicate the axis is not homed. This is to distinguish between "not homed" and "inexact position possible because stepper was disabled". # Conflicts: # Marlin/ultralcd_implementation_hitachi_HD44780.h solved	2016-02-28 16:58:28 +01:00
AnHardt	e736779d7e	blink for char-lcds ... Implement and test blinking for char-lcds # Conflicts: # Marlin/ultralcd_implementation_hitachi_HD44780.h solved	2016-02-28 16:58:19 +01:00
Scott Lahteine	7253a1971d	Fix "M145" output in M503 report	2016-02-27 22:28:08 -08:00
Scott Lahteine	d118e3f985	Merge pull request #3044 from thinkyhead/rc_gcode_spaces ... Fix GCode handling of spaces between command letter and first digit	2016-02-27 22:21:28 -08:00
Scott Lahteine	100271e6ac	minor cleanup in gcode_T	2016-02-27 19:56:56 -08:00
Blue-Marlin	fd9e94e5a4	Fix crashes when the Z axis is moved via LCD ... Fix crashes when the Z axis is moved via LCD by calling `plan_buffer_line` only when there is enough room in the planner buffer, to avoid endless recursion. A brief description about what went wrong is in #1166	2016-02-28 00:59:47 +01:00
Scott Lahteine	8dccd5a7ea	Merge pull request #3018 from CONSULitAS/RCBugFix_K8200_backinsync ... K8200: sample config back in sync	2016-02-27 05:22:12 -08:00
Scott Lahteine	6a4f06d35d	Fix GCode handling of spaces between command letter and first digit	2016-02-26 18:42:59 -08:00
Marc Urben	68eae2b5a8	added kossel xl example configuration	2016-02-27 01:48:45 +01:00
Silvio Didonna	eb5817675d	Fix board type: RAMPS 1.4	2016-02-25 15:52:41 +01:00
AnHardt	cb88fdd242	Protect MarlinSerial against interrupts ... Protect MarlinSerial against interrupts by shielding the CRITICAL_SECTIONs Now with a test if RX_BUFFER_SIZE is in the required range. Code in peek() and read() is now optimized for readability and showing the similarity between the two. Maybe a bit overprotected in checkRx() and store_char(), but now some days without detected errors from this source.	2016-02-24 17:18:12 +01:00
AnHardt	dc0f41868e	Make rx tail/head atomic	2016-02-24 15:51:34 +01:00
CONSULitAS	ea8409ad5d	Fix: current_command_args contains command ... @thinkyhead Hi Scott, your code from a0f362c@thinkyhead is great, but you forgot to skip the command. Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`. see also https://github.com/MarlinFirmware/Marlin/commit/a0f362c735401ebbcd95de3f 6f8e3c2f17ecc770 lines 941, 2851 and so on Greetings and welcome back Jochen	2016-02-24 09:35:04 +01:00
Scott Lahteine	9a3408e58f	Merge pull request #3024 from thinkyhead/rc_remove_steps_mm_e ... Remove obsolete STEPS_MM_E setting	2016-02-23 23:37:09 -08:00
Scott Lahteine	1093c780c8	Remove obsolete STEPS_MM_E setting	2016-02-23 01:11:58 -08:00
CONSULitAS	a4fe6a45ae	K8200: sample config back in sync ... * Configuration.h: * updated header comment * new UUID feature used * sync to default config * typos fixed * changes better documented * reflect change in SDSUPPORT feature * Configuration_adv.h * updated header comment * thermal protection tuned to work with K8200 * homing tuned * sync to default config * typos fixed * changes better documented * reflect change in LCD features * use long filenames * use Watchdog * use Babystepping * use Auto Filament Change	2016-02-21 16:06:25 +01:00
Scott Lahteine	c2e5c6c12c	Nest Manual Bed Leveling options ... This formalizes the dependency of MANUAL_BED_LEVELING on MESH_BED_LEVELING	2016-02-20 20:35:10 -08:00
Scott Lahteine	042a6a0a37	Extend existing MESH_BED_LEVELING test	2016-02-20 20:35:10 -08:00
esenapaj	08b3147791	sanity check for MANUAL_BED_LEVELING	2016-02-20 20:35:10 -08:00
Scott Lahteine	9f8e6dce20	Merge pull request #2942 from esenapaj/esenapaj-patch-2 ... more suitable display format for delta printer	2016-02-18 17:59:35 -08:00
Scott Lahteine	e1beaf61eb	Merge pull request #2985 from AnHardt/adv-ok ... Repair N in ADVANCED_OK	2016-02-18 17:06:26 -08:00
esenapaj	34cde1b77c	Merge pull request #14 from MarlinFirmware/RCBugFix ... Rc bug fix	2016-02-19 09:19:23 +09:00
Scott Lahteine	f00ca3fd89	Fix layout descr. in configuration_store.cpp	2016-02-17 19:44:04 -08:00
Scott Lahteine	0c9db67273	Merge pull request #2983 from AnHardt/ok-echo ... Replace the "ok" in M280, M301, M304, M851 with output not including …	2016-02-17 19:09:41 -08:00
Scott Lahteine	fbfbc5e330	Enable USE_WATCHDOG by default	2016-02-17 17:14:57 -08:00
Scott Lahteine	d4e7c2d694	Merge pull request #2976 from thinkyhead/drop_configurator ... Drop the experimental Configurator	2016-02-17 17:08:08 -08:00
Scott Lahteine	9df0e0e0cc	Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed ... Sanity-check deprecated options replaced by SPI_SPEED	2016-02-17 17:07:58 -08:00
Scott Lahteine	3e2473e695	Merge pull request #2988 from thinkyhead/z2_more_extruders ... Use next open E connector for Y2/Z2	2016-02-17 17:07:07 -08:00
Scott Lahteine	8eaba020fb	Merge pull request #2973 from thinkyhead/fix_splash_url ... Remove references to marlinfirmware.org	2016-02-17 17:05:06 -08:00
Scott Lahteine	438a87eba8	Sanity check deprecated SDSLOW, SDEXTRASLOW	2016-02-17 14:54:10 -08:00
Scott Lahteine	b19b272172	Update configurations with SPI_SPEED ... - Include aligned comment about new SDSUPPORT behavior	2016-02-17 14:54:09 -08:00
Scott Lahteine	7f30f85602	Merge pull request #2987 from thinkyhead/gcode_allow_no_initial_space ... Fix handling of spaces in GCode	2016-02-17 14:51:19 -08:00
Scott Lahteine	b81d3b83cf	Drop the experimental Configurator ... Development moved to https://github.com/thinkyhead/MarlinConfigurator	2016-02-17 14:49:37 -08:00
Scott Lahteine	be691b51f1	Remove references to marlinfirmware.org ... The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.	2016-02-17 14:41:46 -08:00
Scott Lahteine	f3f58bd619	Merge pull request #2992 from thinkyhead/rc_rename_fpos_t ... Rename fpos_t to avoid libc conflict	2016-02-17 14:40:33 -08:00
Scott Lahteine	83ffc9eb4f	Show raw steps in M114 ... This is a proposed change. This section of M114 output is a debug extension according to RepRap wiki.	2016-02-15 15:59:24 -08:00
Scott Lahteine	373e8a1ad4	Fixes for COREXY and COREXZ coordinates	2016-02-15 15:59:24 -08:00
unknown	31656e68bc	Fix for homing X and Y before raising Z when Z_SAFE_HOMING is set.	2016-02-15 15:53:40 -06:00
unknown	8ea55323d8	Fix for not raising Z before homing X and Y	2016-02-15 14:52:04 -06:00
Scott Lahteine	b83e472bd3	Rename fpos_t to avoid libc conflict	2016-02-10 20:49:25 -08:00
Scott Lahteine	68457ee903	For Dual Y/Z use the next available extruder pins	2016-02-09 21:59:09 -08:00
Scott Lahteine	711e5db19a	Tweak comment in process_next_command	2016-02-09 18:16:35 -08:00
Scott Lahteine	400e9329be	Allow spaces after a code letter	2016-02-09 18:03:13 -08:00
Scott Lahteine	cdcb80f3c5	Allow no-space after initial command ... Addresses issue #2715	2016-02-09 18:00:35 -08:00
AnHardt	6f473f7fc6	Repair N in ADVANCED_OK ... Send the correct line number. If no N was in the command - non't send an N.	2016-02-09 19:23:26 +01:00
AnHardt	efbd705eda	Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" ... Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" to avoid senting two "ok"s for a single g-code. Doing the same for M105 would break the input filters of the hosts. For M105 the other "ok" is omitted.	2016-02-09 13:36:03 +01:00
Scott Lahteine	8e66028d25	Apply the ABL rotation matrix to the extruder offset.	2016-02-08 14:22:18 -08:00
esenapaj	ab5aa3fc92	Merge pull request #5 from MarlinFirmware/RCBugFix ... Rc bug fix	2016-02-08 05:42:11 +09:00
esenapaj	27d918d836	Merge pull request #4 from MarlinFirmware/RCBugFix ... Rc bug fix	2016-02-08 05:35:32 +09:00
Scott Lahteine	159ff94afd	Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977	2016-02-07 08:02:11 -06:00
Ruwan J Egoda Gamage	1270fbfd38	Using SET_INPUT instead of pinMode	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	b58083b0fa	Getting rid of SDEXTRASLOW, SDSLOW variables.	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	1833049b8a	reusing millis()	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	1b7c443628	Adding SDULTRASLOW variable. ... Instead of changing SDEXTRASLOW variable to a slower speed, the new SDULTRASLOW is used for rigidbot panel.	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	6f9e9c0e4f	Cleaning up, getting rid of the fake encoder count variable.	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	becbfe1065	Fixing Rigidbot LCD Panel Support	2016-02-07 07:58:52 -06:00
esenapaj	4882a7eded	more suitable display format for delta printer	2016-01-29 18:38:25 +09:00
esenapaj	d7272e3f36	Merge pull request #3 from MarlinFirmware/RCBugFix ... Rc bug fix	2016-01-29 05:43:22 +09:00
Scott Lahteine	62bad1b60f	Merge pull request #2848 from japzi/RCBugFix ... Fixing Rigidbot LCD Panel Support	2016-01-26 17:30:12 -08:00
esenapaj	59d345a3dd	Update Configuration.h	2016-01-22 07:27:11 -06:00
esenapaj	b8f0c8a4c7	Update Configuration.h	2016-01-22 07:27:11 -06:00
esenapaj	df0d599c79	Update Configuration.h	2016-01-22 07:27:11 -06:00
esenapaj	a366697649	Update Configuration.h	2016-01-22 07:27:11 -06:00
Richard Wackerbarth	7c94c83765	Repair formula mangled by PR#1319 in Jan 2015	2016-01-15 10:06:27 -06:00
Naruto-kyun	2932602643	Update stepper.cpp ... Forgot Z2_MIN_PIN	2016-01-15 16:50:43 +01:00
Ruwan J Egoda Gamage	06555febdd	Using SET_INPUT instead of pinMode	2015-12-24 12:12:25 -05:00
esenapaj	8d2aa2368d	Update Configuration_adv.h	2015-12-23 08:16:36 +09:00
esenapaj	0de5fcad0a	Update Configuration_adv.h	2015-12-23 08:16:06 +09:00
esenapaj	1403b9acc0	Update Configuration_adv.h	2015-12-23 08:15:20 +09:00
esenapaj	5cf1c38ea1	Update Configuration_adv.h	2015-12-23 08:12:54 +09:00
esenapaj	04ab61bf40	Update Configuration_adv.h	2015-12-23 08:12:28 +09:00
esenapaj	39c62fbd6f	Update Configuration_adv.h	2015-12-23 08:12:04 +09:00
esenapaj	efcb769003	Update Configuration_adv.h	2015-12-23 08:09:57 +09:00
esenapaj	992fbb831d	Update Configuration_adv.h	2015-12-23 08:08:45 +09:00
esenapaj	5ee6fe6385	Update Configuration_adv.h	2015-12-23 08:07:12 +09:00
esenapaj	056daf00fc	Update Configuration_adv.h	2015-12-23 08:06:15 +09:00
esenapaj	71aafb79a0	Update Configuration_adv.h	2015-12-23 08:03:54 +09:00
Ruwan J Egoda Gamage	2c9e0415c7	Getting rid of SDEXTRASLOW, SDSLOW variables.	2015-12-13 23:23:01 -05:00
Ruwan J Egoda Gamage	a64bcd53e9	reusing millis()	2015-12-13 22:06:03 -05:00
Ruwan J Egoda Gamage	e6cc232184	Adding SDULTRASLOW variable. ... Instead of changing SDEXTRASLOW variable to a slower speed, the new SDULTRASLOW is used for rigidbot panel.	2015-12-13 15:47:10 -05:00
Ruwan J Egoda Gamage	83c4131ba3	Cleaning up, getting rid of the fake encoder count variable.	2015-12-13 15:28:40 -05:00
Ruwan J Egoda Gamage	5eeea2f611	Fixing Rigidbot LCD Panel Support	2015-12-13 15:28:40 -05:00
Richard Wackerbarth	f6950acb8e	Residual unused variable — Backport	2015-12-10 19:48:08 -06:00
Richard Wackerbarth	7a670e3911	Improve planner & stepper PR #263	2015-12-10 07:24:37 -06:00
Richard Wackerbarth	58658c9279	Call the probe pin a probe pin and not a min endstop	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	0fa3bac8ee	If unused, just don’t define it.	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	3b2973da6a	Prepare Ramps for user redefinition	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	1635613c25	Backport cosmetic	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	0b429461d5	Back port Cosmetic changes	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	0cebe85e65	Clean up spacing and duplicate entries ... • Removing trailing whitespace • Adjusting indention for better readability • Removing duplicated entries	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	e7b40bbe98	Change link to U8glib source	2015-12-10 06:33:29 -06:00
Richard Wackerbarth	e2da2b4105	Back port language translation	2015-12-10 06:31:41 -06:00
Richard Wackerbarth	4f314afaf0	Allow Thermistor #12 to be used on hotends also ... //100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) Caveat Emptor —- I’m not sure that this really makes sense, but why keep someone from using it?	2015-12-10 06:31:31 -06:00
Scott Lahteine	60d5658da8	Revert nozzle_bed_fan_menu_items ... For some reason that I cannot determine, using a sub-function causes the Tune sub-menu to act strangely, yet replacing the function call with its code content works perfectly.	2015-12-09 20:33:52 -06:00
AnHardt	57da1b8497	Host parseble output for M109, M190 and M303 ... Make the output of M105 more similar to Repetier. Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()` Use `print_heaterstates()` in M019, M190 and M303	2015-12-07 15:37:53 -06:00
AnHardt	fcceb98191	Unglobalize no_wait_for_cooling	2015-12-07 15:34:26 -06:00
Wurstnase	78a347a01a	change nx, ny, nz and ne from float to long ... st_set_position takes long ```void st_set_position(const long& x, const long& y, const long& z, const long& e)```	2015-12-07 08:22:44 -06:00
Wurstnase	6d691aceee	change dx, dy, dz and de from float to long ... anything is long, we don't need float there	2015-12-07 08:22:24 -06:00
Richard Wackerbarth	6bfcb74c25	The probe stowing coordinates have changed	2015-12-05 19:31:59 -06:00
Wurstnase	0fbfb22506	Renaming delta speeds (PR2824) ... dx -> dsx dy -> dsy dz -> dsz de -> dse	2015-12-04 07:55:45 -06:00
AnHardt	8d1eeff021	Fix status LEDs update when reinitializing the display ... Fix status LEDs update when reinitializing the display By using the regular update function during init. Fixing #2683	2015-12-03 07:18:35 -06:00
Richard Wackerbarth	5a54204f72	Marlin 1.1.0 Release Candidate 3 - 01 December 2015	2015-12-01 07:24:45 -06:00
AnHardt	bb4efcf603	Handle temp callbacks when THERMAL_PROTECTION_HOTENDS is not defined ... by alternate definition for the callback macros	2015-12-01 07:21:52 -06:00
AnHardt	96d0d04b8f	Update LCD buttons less frequently ... Move slow_buttons_update into the LCD_UPDATE_INTERVAL block lcd_implementation_read_slow_buttons() will then be executed ~10 times a second.	2015-11-30 05:44:32 -06:00
Richard Wackerbarth	e293ea57f0	Unbalanced brackets in setPwmFrequency ... This is a back port of the correct in issue #248	2015-11-30 05:44:32 -06:00
AnHardt	c956b52c4a	Babystep Multiplier ... Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by @RicardoGA Restore the Babystep Multiplicator functionality and now it's available for X/Y/Z	2015-11-30 05:43:10 -06:00
Richard Wackerbarth	956418c674	Kc is also a multi-PID parameter	2015-11-23 06:08:01 -06:00
AnHardt	33addc52a1	Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747) ... For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA configurations. This PR comments the feature out, where it is commented in by default.	2015-11-13 07:33:33 -06:00
AnHardt	8da2e98985	Split RAMPS 1.3 an 1.4 (PR#2741) ... because of hardware differences on the SERVO0_PIN	2015-11-13 07:13:48 -06:00
AnHardt	be7167ed97	Change XY formatting on LCD (PR#2740) ... According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.	2015-11-13 06:46:11 -06:00
Luis Correia	e7099ea597	Fix Portuguese (Portugal) strings (PR#2700) ... Align strings with release	2015-11-12 00:08:42 -06:00
Scott Lahteine	754b13d8fe	Patch issue #2315	2015-11-12 00:03:22 -06:00
Scott Lahteine	dbd4c17096	Init Kp, Ki, Kd to 0	2015-11-12 00:03:22 -06:00
Scott Lahteine	644c376e84	Use binary OR with endstop bits	2015-11-12 00:03:22 -06:00
Scott Lahteine	54a39d8c1a	Use a ternary in qr_solve.cpp	2015-11-12 00:03:22 -06:00
Scott Lahteine	17c23bbaf3	Shorten gcode_M221 yet function the same	2015-11-12 00:03:22 -06:00
Scott Lahteine	c0e791dbe9	Only look for "N" line number as first parameter	2015-11-12 00:03:22 -06:00
Scott Lahteine	b4af4441c5	Clean up watchdog impl.	2015-11-12 00:03:22 -06:00
Scott Lahteine	8f16563bbd	Use "defined" with LCD_PIN_BL and LCD_PIN_RESET	2015-11-12 00:03:22 -06:00
Scott Lahteine	6fa7e24af3	Use "UNUSED" to squash compiler warnings	2015-11-12 00:03:22 -06:00
Scott Lahteine	d5b7c595ae	Use static locals in utf_mapper.h	2015-11-12 00:03:21 -06:00
Scott Lahteine	9bdab4f3a8	Clean up "else" and other spacing	2015-11-12 00:03:21 -06:00
Scott Lahteine	9b23490f01	Clean up spacing in configs	2015-11-12 00:03:21 -06:00
esenapaj	c6c37abd41	Update language_kana.h	2015-11-12 00:00:51 -06:00
esenapaj	c24045475a	Update language_kana_utf8.h	2015-11-12 00:00:32 -06:00
Richard Wackerbarth	25d636c9e0	Compiler issues (PR#2696)	2015-11-11 23:52:11 -06:00
AnHardt	47401ec97b	MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY ... in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined. Originaly by @12dstring	2015-10-08 10:45:11 -05:00
Scott Lahteine	ba6a243197	DEBUG message has no parameter (PR#2671)	2015-10-03 22:03:03 -05:00
Scott Lahteine	0c7f7ebcfb	Styling adjustments (PR#2668 & PR#2670) ... Keep "astyled" reformatting	2015-10-03 22:02:45 -05:00
Rafa Couto	b5fb7075b9	Galician (gl) language.	2015-09-30 14:46:01 -05:00
Richard Wackerbarth	7b4bdc0203	DUAL_X_CARRIAGE motor enabling ... As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.	2015-09-30 04:31:19 -05:00
Richard Wackerbarth	91b5156b3e	Marlin 1.1.0 Release Candidate 2 - 29 September 2015	2015-09-29 20:28:41 -05:00
Richard Wackerbarth	03f0edb57e	Fix high LCD status screen update frequency (PR#2655)	2015-09-28 11:07:33 -05:00
KiteLab	0ad25c6665	Hint for changed behaviour of SDSUPPORT	2015-09-28 11:07:33 -05:00
Richard Wackerbarth	e01f5e1ef7	Cleanup	2015-09-17 10:44:23 -05:00
Mike Cochrane	5e36b64635	SDEXTRASLOW for some SD card readers (PR#176) ... Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL	2015-09-14 07:58:08 -05:00
Scott Lahteine	5d65a36dee	Give lcd_sd_status an UNKNOWN state (PR#180)	2015-09-14 06:32:27 -05:00
fmalpartida	0f149ea0c6	LCD home button causes repeated homing (PR#175) ... Fix: increased debounce delay.	2015-09-14 06:31:49 -05:00
Scott Lahteine	b825567e0f	Drop www. from marlinfirmware.org (PR#175)	2015-09-14 06:28:53 -05:00
Scott Lahteine	db27e67580	Apply PID_ADD_EXTRUSION_RATE to extras	2015-09-12 07:53:20 -05:00
Scott Lahteine	bc50db9cf6	Implement PID_ADD_EXTRUSION_RATE	2015-09-12 07:53:20 -05:00
Scott Lahteine	cffb2d457e	Cleanup file formatting	2015-09-12 07:48:27 -05:00
Scott Lahteine	7ac7ddbf20	Show nozzles, heaters, and extruders numbered 1-4	2015-09-12 07:40:18 -05:00
Scott Lahteine	5bc480fee8	Fix Move E menu items	2015-09-12 07:33:49 -05:00
Scott Lahteine	fc882c34a3	Init lcd_sd_status as false to force lcd_update test ... Replaces #145 which is way out of date	2015-09-12 07:32:20 -05:00
Scott Lahteine	e27dd5c22d	Conditionalize functions that rely on SDSUPPORT	2015-09-12 07:30:09 -05:00
Scott Lahteine	fabf3ae4a0	Add final Z raise after Delta probe	2015-09-12 07:23:24 -05:00
Petr Zahradnik	8c768a76a2	Create language_cz.h ... Czech language translation.	2015-09-12 07:18:05 -05:00
Petr Zahradnik	5b9010965d	Update language.h ... Added comment for Czech language (associated with file language_cz.h).	2015-09-11 04:43:54 +02:00
Scott Lahteine	89fb778684	Fix up probe pin define and test	2015-09-10 10:54:03 -05:00
Scott Lahteine	558665cd90	Constrain Tune > Nozzle/Flow menu items	2015-09-10 08:47:11 -05:00
Scott Lahteine	9f462f0cf5	Hack to address stuttering caused by ISR not finishing in time ... (PR #138) When the ISR does not finish in time, the timer will wrap in the computation of the next interrupt time. This hack replaces the correct (past) time with a time not far in the future.	2015-09-10 08:26:17 -05:00
Scott Lahteine	8b3d63c423	Unify Delta XYZ homing rates ... As noted in #130 allen key probe stow rate is based on homing rates, but homing rates were left out of most delta configs. This unifies the XYZ homing rates and applies the unified rates to allen key movements.	2015-09-08 13:11:55 -05:00
Scott Lahteine	7c72b57313	Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128) ... As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.	2015-09-08 13:11:55 -05:00
Scott Lahteine	f690b82343	Remove extra MAX_FREQ_TIME define (PR#148)	2015-09-08 13:11:12 -05:00
Scott Lahteine	a4c78ae786	Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z	2015-09-07 09:41:06 -05:00
Scott Lahteine	a39fadf876	Update kossel-pro example config (again?)	2015-09-07 09:41:06 -05:00
Scott Lahteine	34e0a8d848	Move Y2 and Z2 pins defines to pins.h	2015-09-07 09:41:06 -05:00
Scott Lahteine	28599c51c7	Wrap Dual Y options in a conditional	2015-09-07 09:41:05 -05:00
Scott Lahteine	11a065c0ca	Remove Z2 pins overrides from Configuration_adv.h	2015-09-07 09:41:05 -05:00
Scott Lahteine	f7f6b5faae	Fix lcd_move_e compile error (PR#143) ... Fix a compile error introduced in #98	2015-09-07 09:36:05 -05:00
Scott Lahteine	2b30e8ac99	Conditionals for ULTIPANEL without SDSUPPORT	2015-09-06 02:04:49 -05:00
Scott Lahteine	7c7a4051fe	Disable SDSUPPORT by default ... As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`, `PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible to disable `SDSUPPORT` on these controllers and then disables it by default. Users of these controllers will now need to enable `SDSUPPORT` in their configurations as others currently do.	2015-09-06 02:04:49 -05:00
Eric Kuzmenko	b23d765991	Added Extrude From Multiple Extruders from LCD feature	2015-09-05 05:33:18 -05:00
Christian Lefrançois	8347a9d6e4	Fix HOMING_BUMP_DIVISOR for deltas configuration ... * Re-bump speed divisor should be the same for delta printer.	2015-09-03 09:26:28 -05:00
Scott Lahteine	703df2cb6c	Fix error message for probe region sanity check	2015-09-03 03:27:47 -05:00
Shane Francis	4c8330c15c	Trim Adjustments for Delta Configurations	2015-09-03 01:05:33 -05:00
Scott Lahteine	962120d1d2	Fix spacing in some conditional blocks	2015-08-27 20:59:09 -05:00
Richard Wackerbarth	20b4772155	Create DEBUG_LEVELING_FEATURE	2015-08-27 20:52:08 -05:00
Scott Lahteine	194f98ff95	Debug messages for homing and leveling	2015-08-27 20:52:08 -05:00
Richard Wackerbarth	6292d9e815	Rename ENABLE_AUTO_BED_LEVELING ... With the introduction of the #if ENABLED(…) reads better than	2015-08-27 20:52:08 -05:00
Richard Marko	91fd66ffba	add Lulzbot TAZ4 example configuration (PR#104)	2015-08-27 08:36:43 -05:00
Wurstnase	7a275773ee	remove colon in utf_mapper.h (PR#106)	2015-08-27 07:15:23 -05:00
Chris Bruner	6b4b6fa315	update for newest version of U8glib_Arduino	2015-08-26 19:52:59 -05:00
Christian Lefrançois	9897a9147c	Update ABL comments (PR#95) ... * Updates the auto bed leveling comments ONLY. * Renames "Z probe" word usage in //comments and #errors properly.	2015-08-26 05:51:38 -05:00
Christian Lefrançois	a7822e3ff7	Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) ... * Fix a couple of renames omission and macro expansion errors.	2015-08-20 06:04:46 -05:00
Richard Wackerbarth	ad90e851b3	Use a small unsigned integer type	2015-08-16 06:56:47 -05:00
Richard Wackerbarth	29b456ae07	Suppress some compiler warnings	2015-08-16 06:56:47 -05:00
Scott Lahteine	23d742bf06	Don't free the stack array plane_equation_coefficients (PR#83)	2015-08-16 06:53:24 -05:00
Scott Lahteine	e3b1e08777	Patch G30 to use raise_z_for_servo (PR#73)	2015-08-15 21:47:04 -05:00
Scott Lahteine	a1eb90d5c0	Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET	2015-08-12 21:26:32 -05:00
Scott Lahteine	91122277f4	Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes	2015-08-12 21:26:25 -05:00
AnHardt	5707a2c3d5	indexindexIntoAB is only vald for !DELTA	2015-08-11 17:32:11 -05:00
AnHardt	d8860f9ad9	Alway end at the same point ... Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION] Regardles the evennes of auto_bed_leveling_grid_points.	2015-08-11 17:32:11 -05:00
AnHardt	4ca8f4a9a7	Always zigzag ... Use the shortest way between probing-points.	2015-08-11 17:32:11 -05:00
AnHardt	3d23424121	Add array indexIntoAB[xx][yy] ... and use it.	2015-08-11 17:32:11 -05:00
AnHardt	e2d69f66b2	Make Z_PROBE a Z_MIN_PROBE (PR#65) ... Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.	2015-08-11 14:41:36 -05:00
AnHardt	6a6e863a47	Resolve #2581 by adding a missed ';' (PR#67)	2015-08-10 12:51:59 -05:00
RicardoGA	e09ff79635	Update pins_RAMPS_13.h (PR#64) ... Now all ramps configuration can enable Filament sensor not only EEB	2015-08-10 05:53:01 -05:00
Fourmi	e6aed7bb4e	Update thermistortables for Hisens Thermistor (PR#2588)	2015-08-09 18:11:14 -05:00
Richard Wackerbarth	9d8cc24abf	Continue from the line following the M999 (PR#60) ... If the printer is going to accept the M999, then it should continue from that line number.	2015-08-08 08:08:02 -05:00
wurstnase	f3ab1dba54	Z babystepping for coreXY (PR#47) ... only X and Y were not implemented	2015-08-04 20:10:09 -05:00
Richard Wackerbarth	35afea1c0e	Restore test ... PR#2572 Changed this because of faulty Boolean Logic NOT(A OR (NOT B) OR (NOT C)) != (NOT A) AND ((NOT B) OR C)) Besides, the compiler should be smart enough to optimize this without help from the programmer	2015-08-04 15:22:56 -05:00
Scott Lahteine	6af75f4b5d	Squish down deprecated tests in sanity check	2015-08-03 16:04:48 -05:00
Scott Lahteine	edeb58288e	Use PIN_EXISTS in sanity check	2015-08-03 16:04:48 -05:00
Scott Lahteine	c30b7693e0	Clean up RUMBA pins conditions	2015-08-03 16:04:48 -05:00
Scott Lahteine	46453905d6	Apply remaining ENABLED/DISABLED conditionals	2015-08-03 16:04:48 -05:00
Richard Wackerbarth	b227d8c128	Supply a VERSION in a short form for displays ... The long descriptor will still be available in M115	2015-08-03 08:21:09 -05:00
Richard Wackerbarth	cd7828a928	This will be the 1.1.0 Release rather than 1.0.3	2015-08-03 08:08:38 -05:00
Richard Wackerbarth	4e2f5618c1	Pick up Default_version when needed	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	329acc852e	Canonize Option flag USE_AUTOMATIC_VERSION	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	5a11d32a85	Move deprecation test to SanityCheck.h	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	7bb7a52940	Bring config up-to-date	2015-08-03 07:35:33 -05:00
AnHardt	244ea2014a	Boot-screen for text-displays improvements ... Centred the logo for 16x4 and 20 x4. Moved version to the bottom line Code shrink to 704 bytes.	2015-08-03 07:13:00 -05:00
AnHardt	80f2a20842	Enable bootscreen in all Configurations	2015-08-03 07:13:00 -05:00
AnHardt	2684d061ed	Scroll too long strings on bootscreen	2015-08-03 07:13:00 -05:00
AnHardt	4f46df5dab	Make bootscreen configurable for the graphic displays ... Saves about 473 byte of progmem and 28 bytes of RAM.	2015-08-03 07:13:00 -05:00
AnHardt	09571b7753	Boot-screen for the character displays ... Uses about 488 byte of progmem and 32 byte of RAM. For that configurable.	2015-08-03 07:13:00 -05:00
Richard Wackerbarth	866efc14fe	Add Danish translations	2015-08-03 07:06:17 -05:00
Scott Lahteine	267f3479d7	Adjust spacing in pins_RAMPS_13.h	2015-08-02 23:26:58 -05:00
Scott Lahteine	56702e7bb9	Define servo pins just like other pins	2015-08-02 23:26:58 -05:00
Richard Wackerbarth	4b9d5cd352	Use lowercase names for serial instances	2015-08-02 23:01:39 -05:00
Scott Lahteine	1e2deff4fd	Rename BTENABLED to BLUETOOTH ... - For some reason it’s easy to forget what BT stands for, but it doesn’t need an abbreviation.	2015-08-02 22:56:50 -05:00
Scott Lahteine	68055a5959	Include RIGIDBOT_PANEL in Conditionals	2015-08-02 22:26:41 -05:00
George Djabarov	f8ed3a835d	Added comment with the RigidBot Big bed size	2015-08-02 22:13:37 -05:00
George Djabarov	7deae6b6be	Updated RigidBot example configuration ... - The default serial baud rate of 115200 - The regular RigitBot bed size 254mm/248mm/254mm - Single stock extruder - Stock termistors for extruder and hotbed - Stock Min X/Y/Z stops. Max stops not connected - Stock 32 teth tooleys (stock axis steps) - No auto bed leveling - No screen	2015-08-02 22:13:37 -05:00
Scott Lahteine	5418faa1f9	Add sanity checks for old names	2015-08-02 22:09:08 -05:00
Scott Lahteine	f03e063750	Rename BEEPER to BEEPER_PIN ... For consistency with other pins, allowing use of `PIN_EXISTS` macro.	2015-08-02 22:09:08 -05:00
Scott Lahteine	270c766de2	SDCARDDETECT -> SD_DETECT, added docs ... - `SD_DETECT_PIN` replaces `SDCARDDETECT` - `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED` - Revise the description of `SD_DETECT_INVERTED` - Add a note about the override of `SD_DETECT_INVERTED` in `Conditionals.h`	2015-08-02 21:59:41 -05:00
Scott Lahteine	496fc28dc3	Tweaks to pins comments	2015-08-02 21:34:13 -05:00
Scott Lahteine	8d3b74cc6e	Rename SDCARDDETECT to SDCARDDETECT_PIN ... - Rename the pin so it can be tested with `PIN_EXISTS` - Fix some incorrect tests for `SDCARDDETECT`	2015-08-02 21:34:13 -05:00
Scott Lahteine	0f5ada8cbd	Group the fail case in one negation (PR#2572)	2015-08-01 18:55:50 -05:00
AnHardt	7ddf1cda1d	Improve condition for SERVO_LEVELING (PR#2570)	2015-07-31 22:41:34 -05:00
Richard Wackerbarth	f32048b8f5	In for a penny, in for a pound	2015-07-31 17:13:53 -05:00
Scott Lahteine	e944f960de	Add a sanity check for old name "BEEPER"	2015-07-31 17:13:53 -05:00
Scott Lahteine	8ebf0b92be	Spacing adjustments in some pins files	2015-07-31 17:13:53 -05:00
Scott Lahteine	94a796c8cc	Rename BEEPER to BEEPER_PIN ... For consistency with other pins, allowing use of `PIN_EXISTS` macro.	2015-07-31 17:13:53 -05:00
Richard Wackerbarth	b217474eab	Compiler Complaints about concatenated tokens (PR#2566)	2015-07-31 17:08:44 -05:00
Scott Lahteine	2460f82d8b	Make proper distinction between BEEPER and HAS_BUZZER	2015-07-31 01:24:33 -05:00
Scott Lahteine	58cfcd4239	Overridable Options - Part 5 ... Apply `ENABLED` / `DISABLED` macros to files needing only a small number of changes.	2015-07-31 01:24:20 -05:00
Scott Lahteine	5e834352a9	Overridable Options - Part 11 (PR#2563) ... Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.	2015-07-31 01:07:04 -05:00
Scott Lahteine	bf6eb93c61	Overridable Options - Part 10 (PR#2562) ... Apply `ENABLED` / `DISABLED` macros to planner files.	2015-07-31 01:06:29 -05:00
Scott Lahteine	51e89a269c	Overridable Options - Part 9 (PR#2561) ... Apply `ENABLED` / `DISABLED` macros to temperature-related files.	2015-07-31 01:05:55 -05:00
Scott Lahteine	c35fb88094	Overridable Options - Part 8 (PR#2560) ... Apply `ENABLED` / `DISABLED` macros to stepper-related files.	2015-07-31 01:05:22 -05:00
Scott Lahteine	0d8989fc14	Overridable Options - Part 7 (PR#2559) ... Apply `ENABLED` / `DISABLED` macros to LCD-related files.	2015-07-31 01:04:37 -05:00
Scott Lahteine	b4abb0ae7f	Apply ENABLED / DISABLED to Marlin core files (PR#2558)	2015-07-31 01:03:58 -05:00
Scott Lahteine	c0d7ea3e7e	Overridable Options - Part 4 (PR#2556) ... Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.	2015-07-31 00:44:53 -05:00
Scott Lahteine	4b40964064	Overridable Options - Part 3 (PR#2555) ... Apply `ENABLED` / `DISABLED` macros to language-related files.	2015-07-31 00:19:13 -05:00
Scott Lahteine	32683b282b	Include configurator copies of configs	2015-07-31 00:03:36 -05:00
Scott Lahteine	37d1879386	Apply overridables to Configuration files	2015-07-31 00:03:36 -05:00
Scott Lahteine	9d151bb61b	servo_endstop_angles -> servo_endstop_angle	2015-07-30 23:35:57 -05:00
Scott Lahteine	9334479aeb	Minor cleanup of Conditionals.h	2015-07-30 23:35:57 -05:00
Scott Lahteine	1f63293624	servo_endstops -> servo_endstop_id	2015-07-30 23:35:57 -05:00
Scott Lahteine	edaaead7e0	Fix comment about SERVO_ENDSTOP_ANGLES	2015-07-30 23:35:57 -05:00
Scott Lahteine	ed4a6371ad	Add HAS_SERVO_ENDSTOPS to simplify conditonals	2015-07-30 23:35:57 -05:00
Scott Lahteine	70be61d416	Reset filament_size with a loop	2015-07-30 23:31:58 -05:00
Scott Lahteine	ae9274be05	Fix minor compiler warnings in for loops	2015-07-30 23:31:58 -05:00
Scott Lahteine	c7c8cfed6f	Complete M200 output with M503 ... - The contents of EEPROM include filament diameters even with Volumetric disabled. This change makes `M503` display the full volumetric settings so that playing back the output of `M503 S0` will fully restore them.	2015-07-30 23:31:58 -05:00
Scott Lahteine	4a58e447a1	Add array size to servo_endstop_angles (PR#2553)	2015-07-30 23:27:38 -05:00
Andrew Lenharth	a0ae9e30df	don't pass integer by reference, inefficient. (PR#2547)	2015-07-30 17:51:12 -05:00
AnHardt	d03f037a92	Get rid of malloc() and free() (PR#2549) ... Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free(). Saves about 656 bytes of progmem (library-code) and 22 bytes for static variables. Should use exactly the same amount of stack as it did before on the heap.	2015-07-30 17:50:31 -05:00
Scott Lahteine	3b2b2313ff	Combine if block related to SERVO_ENDSTOPS	2015-07-30 16:39:05 -05:00
Scott Lahteine	0af2a80e06	Make SERVO_ENDSTOP_ANGLES 2-dimensional	2015-07-30 16:38:56 -05:00
Richard Wackerbarth	525d0dc239	Configurator is out-of-date AGAIN (PR#2550)	2015-07-30 16:36:01 -05:00
Richard Marko	dd22cbbfb8	makefile: add buzzer.cpp (PR#2479)	2015-07-30 07:56:44 -05:00
Scott Lahteine	9f48798ffd	Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542)	2015-07-30 07:55:29 -05:00
Richard Wackerbarth	ae00fad75b	Rename as M100	2015-07-27 20:31:59 -05:00
Richard Wackerbarth	a401d738df	There is an echo in here	2015-07-27 20:31:59 -05:00
Richard Wackerbarth	ed7d45e8f5	Memory watcher	2015-07-27 20:31:59 -05:00
AnHardt	d17f7ebc8a	Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535) ... instead of 1000. Else we get errors with times over 32 seconds.	2015-07-27 20:30:53 -05:00
Scott Lahteine	bea6739774	Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527)	2015-07-27 20:24:33 -05:00
Scott Lahteine	81bba7ed88	More sanity checking for extruder requirements (PR#2531)	2015-07-27 10:14:43 -05:00
AnHardt	87a97f3724	Fix conditions for display strings	2015-07-26 20:41:21 -05:00
AnHardt	aaccea0260	Shift some display only strings from language.h to lenguage_en.h ... and translate them to German.	2015-07-26 20:41:15 -05:00
Scott Lahteine	e4c01f1c7e	Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507)	2015-07-26 20:40:27 -05:00
Scott Lahteine	ab6f1fdf8b	Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) ... As suggested in #2521 - Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is also required. - Add a note that endstops must be enabled for the feature to have any effect	2015-07-26 20:36:37 -05:00
Richard Marko	1183c10a2e	makefile: drop -q -q (much quiet) from avrdude flags ... Annoying when trying to figure out if uploading actually does something.	2015-07-26 20:31:31 -05:00
Richard Marko	0e064357f4	makefile: use /etc/avrdude/avrdude.conf on linux ... No need to look for arduino specific avrdude configuration as distributions ship their own avrdude.conf file that is compatible with arduino.	2015-07-26 20:31:31 -05:00
Scott Lahteine	bcb7d5a149	Improve sanitycheck for TEMP_SENSOR_1	2015-07-25 21:17:36 -05:00
Scott Lahteine	5b24f59401	Add sanity checks for temp sensors	2015-07-25 21:17:36 -05:00
AnHardt	fd0e81b0c7	Distinguish between BUZZER and SPEAKER (PR#2513) ... A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC. A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC. There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer. To make these board able to handle a speaker * replace the PWM based tone()-function again with a on-delay-off-delay loop. Hopefully the last time I touch the beeper code.	2015-07-24 22:10:04 -05:00
Scott Lahteine	e2957df05c	Shorthand for do_blocking_move_to	2015-07-24 22:07:41 -05:00
Scott Lahteine	819c5b9b50	Adjust comment on Z adjustment	2015-07-24 22:07:41 -05:00
Scott Lahteine	5a7356b6fc	Patch for G29 final Z position ... Include all the necessary pieces to get the final Z position after probing the bed, and add commentary about other possible changes.	2015-07-24 22:07:41 -05:00
AnHardt	088e09e052	Add forgotten Marlin_main.cpp	2015-07-24 22:04:49 -05:00
AnHardt	8b876241bd	Some more servo code tweaks ... Just set up the pin. Don't move to a random position. Simplify servo::move() * servo::move() does not need the pin parameter - The pin is set during servo_init() with attach(). * servo::move() does not need a return value. SERVO_LEVELING is the wrong condition to deactivate the servos. Remove some temporary (Servo *) variables. SanityCheck for the servo indexes.	2015-07-24 22:04:49 -05:00
Scott Lahteine	b116c096bd	Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512) ... Updates to `set_homing_bump_feedrate`: - Move the string into Program Memory, reduce length by 31 bytes - Use an auto to get the divisor, adjust it on error - Set feedrate once, at the end	2015-07-24 22:00:25 -05:00
Scott Lahteine	f7e7862588	Better Sanguinololu & Graphical Controller (PR#2504) ... - Change suggested at https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553 266	2015-07-23 23:47:07 -05:00
Scott Lahteine	a1154d4a20	Enable Y and sanity-check CoreXZ (PR#2509)	2015-07-23 23:46:27 -05:00
Scott Lahteine	932f1c109e	Move servos to the top in pins_MEGACONTROLLER.h	2015-07-23 22:51:41 -05:00
Scott Lahteine	90f8ddfc1e	Apply MINIPANEL to other configs	2015-07-23 22:51:41 -05:00
AndySze	00dbf69b6d	add MINIPANEL defines	2015-07-23 22:51:40 -05:00
AndySze	8ac5e56934	fixed some format problems and cleaned code	2015-07-23 22:51:40 -05:00
AndySze	eef595aa64	add makerlab mega controller pin configs	2015-07-23 22:51:40 -05:00
AnHardt	4e14e152fa	Add Travis tests for CORXY and COREXZ	2015-07-23 19:52:48 -05:00
AnHardt	27d7d2ccab	Correct bracketing for COREXY-XZ	2015-07-23 19:52:21 -05:00
Scott Lahteine	469843427d	Reduce code in gcode_M81 (PR#2497)	2015-07-23 08:14:00 -05:00
Scott Lahteine	c66955aaf9	Mark unchanging arrays as const (PR#2494) ... The compiler may be able to optimize if it knows an array won’t be changing.	2015-07-22 21:37:37 -05:00
Scott Lahteine	278aa15301	Add COUNT macro and apply	2015-07-22 18:16:05 -05:00
Scott Lahteine	d85861d296	Move macros, add ENABLED/DISABLED, add includes	2015-07-22 18:16:05 -05:00
Scott Lahteine	17960fd2b0	Neaten up pins_MEGATRONICS.h (PR#2493)	2015-07-22 17:23:22 -05:00
Scott Lahteine	aac2b9aa9d	Reduce code in gcode_M84 (PR#2492) ... `gcode_M84` only needs to call `finishAndDisableSteppers`, which calls all the other functions.	2015-07-22 17:22:01 -05:00
Scott Lahteine	4971fa73f9	Add a sanitycheck error for old servo settings (PR#2491) ... - Documentation solution for #2476	2015-07-22 16:35:10 -05:00
Scott Lahteine	96ace72ddc	Servos attach/detach based only on servo config ... Assuming #2470 fixed up the main issue.	2015-07-22 16:34:26 -05:00
Richard Wackerbarth	b80a6a8d31	Correct Kossel Pro Configuration_adv (PR#2473)	2015-07-22 16:32:08 -05:00
Scott Lahteine	000a6fce46	Extract update_endstops from stepper ISR (PR#2474)	2015-07-19 18:33:18 -05:00
Scott Lahteine	e83eac312e	Move plan_arc next to prepare_move	2015-07-19 16:18:46 -05:00
Scott Lahteine	5c5936508d	G2/G3 Arcs for Delta ... - Update prepare_move_delta to take a target argument - Add Delta support to plan_arc	2015-07-19 16:18:46 -05:00
Scott Lahteine	9f53e2f0c9	Implement COREXZ in stepper.cpp and planner.cpp	2015-07-19 16:17:03 -05:00
Scott Lahteine	fa00e1d97f	Explode conditions common to corexy and cartesian	2015-07-19 16:17:03 -05:00
Scott Lahteine	c7dd5527b4	Add a C_AXIS and Z_HEAD to support COREXZ	2015-07-19 16:17:03 -05:00
Scott Lahteine	129f986ccf	Add COREXZ option to configurations	2015-07-19 16:17:03 -05:00
Scott Lahteine	69b0490b77	Show minimal preheat options in menus (PR#2471)	2015-07-19 16:14:59 -05:00
Scott Lahteine	eacfe132aa	Change the name of servos[] and servo_t	2015-07-19 11:35:48 -07:00
Scott Lahteine	3b23ccd366	Patch servos code for move ... - Have `Servo::attach` explicitly return -1 if it fails - Check for -1 in `Servo::move` because `servoIndex` might be 0 - Make `attach` / `detach` calls conditional on `SERVO_LEVELING` - Move `SERVO_LEVELING` define to `Conditionals.h`	2015-07-19 11:24:23 -07:00
Richard Wackerbarth	54ddc1d417	Simplify DRY RUN (PR#2358) ... Elsewhere DRYRUN turns off the heating elements and ignores constraints on them. Here, whenever motion is entered into the planner, if DRY RUN is set, we instantly act as if the E_AXIS is in the desired final position.	2015-07-19 10:15:53 -05:00
Scott Lahteine	944090c19c	Optimize lsDive logic	2015-07-19 10:13:40 -05:00
Scott Lahteine	417706e578	Include space for the terminating nul in lsDive	2015-07-19 10:13:39 -05:00
Scott Lahteine	f3c1a6b19c	Reduce lsDive stack usage to the minimum	2015-07-19 10:13:39 -05:00
Patrick Bogen	fba4e6241b	Specify print format for reporting invalid tmp_extruder (PR#2465)	2015-07-18 16:40:01 -05:00
AnHardt	d15d869267	Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464) ... to make clear - it's not a question but an order.	2015-07-18 10:27:21 -05:00
Scott Lahteine	f209b755a5	Move the Z probe as far as needed to trigger the switch (PR#2461)	2015-07-16 20:02:44 -05:00
Scott Lahteine	0f1df62389	Fixup comments in code_seen	2015-07-16 16:40:52 -05:00
Scott Lahteine	2945eb6650	Call code_seen only once per parameter	2015-07-16 16:40:52 -05:00
Scott Lahteine	b742af2e2a	Move Y_STOP_PIN for Printrboard with SD (PR#2420)	2015-07-16 16:39:55 -05:00
Scott Lahteine	baa9199973	Define extern delta only for delta	2015-07-16 16:36:30 -05:00
Scott Lahteine	77e80ef367	Require extruders for thermal code	2015-07-16 16:36:30 -05:00
Scott Lahteine	3bde4f4855	Require temp sensor for bed thermal protection	2015-07-16 16:36:30 -05:00
Scott Lahteine	82a3ed2f9a	Cleanup and dev notes in Marlin.h	2015-07-16 16:36:30 -05:00
Scott Lahteine	db23b9b184	Minor tweak to M204 code (PR#2457)	2015-07-16 16:35:13 -05:00
Scott Lahteine	81d42406b7	Move braces in homeaxis to prevent a hanging else (PR#2451)	2015-07-16 10:25:54 -05:00
Scott Lahteine	552a327df8	Fix lsDive filename stack overrun (PR#2449)	2015-07-16 10:23:56 -05:00
AnHardt	a6628f12cc	Eliminate the further use of the pin-parameter	2015-07-15 20:50:58 -05:00
AnHardt	8504992e9f	Remove the additional pin variable in Servo.cpp ... as sugested by @c-born inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240	2015-07-15 20:50:58 -05:00
AnHardt	ed6598adf5	Corrected Bed Height vs. Bed Topology for verbosity > 3 ... and cleaned out some tabs. Everything else is a rebased PR#2017 as proposed by @CptanPanic	2015-07-15 19:51:40 -05:00
brian	62302ceb9e	Add calculation of difference between auto-correct bed level plane, and measured topo map.	2015-07-15 19:51:40 -05:00
Scott Lahteine	de25a48dec	Remove PID examples from preconfigured configs	2015-07-15 19:13:53 -05:00
Scott Lahteine	7456710a1f	Update configs formatting	2015-07-15 19:13:47 -05:00
Scott Lahteine	391386dd94	Update configs for new servo deactivation	2015-07-15 19:13:40 -05:00
AnHardt	5243d8b523	Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default	2015-07-15 17:39:43 -05:00
AnHardt	49609f6c14	Activate the new servo.move() function ... by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp and removing the old configuration in the ABL part of Configuration.h	2015-07-15 17:39:43 -05:00
AnHardt	40b6edcad7	Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h ... DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY. But it will work on all servo moves, not only the probe servo moves.	2015-07-15 17:39:43 -05:00
AnHardt	2ddb2a2be9	Add Servo::move() to servo.cpp ... move(pin, angel) - Sequence of attach(pin), write(angel), if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches. As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour, the usual sequence to handle a servo movement is: attach(pin) write(angel) delay(until the servo finished the move) detache() Here a function to handle the complete sequence.	2015-07-15 17:39:43 -05:00
mkile	8a01e5fb7a	Update Russian translation (PR#2443) ... Slightly updated translation.	2015-07-15 10:35:36 -05:00
Richard Wackerbarth	e83575537a	Compiler defines USBCON for USB devices (PR#2433)	2015-07-15 10:32:11 -05:00
ayberkozgur	7268d46508	Always calculate extruder temperature PID d term (PR#2432)	2015-07-13 13:22:26 -05:00
Scott Lahteine	87a872e103	Use st_get_position_mm where possible (PR#2411)	2015-07-12 22:15:54 -05:00
Scott Lahteine	2e0da8abdc	Allow N to take a negative argument (PR@2402)	2015-07-12 22:14:25 -05:00
Scott Lahteine	447dbd6fa5	Add STEPPER_RESET_PIN support	2015-07-11 16:04:11 -05:00
Scott Lahteine	a0351bdb73	Remove STEPPER_RESET_FIX option	2015-07-11 16:04:11 -05:00
Scott Lahteine	6b1b8cb2b3	Also nullify spaces before the checksum asterisk (PR#2409)	2015-07-10 09:03:07 -05:00
Scott Lahteine	8e61314323	Use RIGIDBOT_PANEL for consistency with online docs	2015-07-09 11:36:46 -05:00
Scott Lahteine	4b204da3c1	Cleanup of pins_RAMPS_13.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	536f86e896	RigidBot CONTROLLERFAN_PIN in Configuration_adv.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	f068e46661	RigidBoard include for pins.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	9ebcae496d	RIGIDBOARD / RIGIDPANEL	2015-07-09 11:36:46 -05:00
Scott Lahteine	c3c605c658	Move note about LiquidTWI2 to Configuration.h (PR#2406)	2015-07-09 05:33:17 -05:00
Scott Lahteine	4e9d658141	Prevent a hanging SERIAL_ECHO_START in M111	2015-07-07 06:59:10 -05:00
Scott Lahteine	bc0fdbe88e	Use SERIAL_EOL in SERIAL_PROTOCOLLN macros	2015-07-07 06:59:10 -05:00
Scott Lahteine	d78ebbc0e9	Remove unused MSG_OK_B and MSG_OK_T	2015-07-07 06:59:10 -05:00
Scott Lahteine	6b494c1535	Use disable_all_heaters in M111	2015-07-07 06:59:10 -05:00
Scott Lahteine	15190d40df	Add extra EOL after M111	2015-07-07 06:59:10 -05:00
AnHardt	0e1cf78f5c	Remove code for testing if probing range is too small (PR#2390) ... becaue it is over-restrictive and superseeded by the now working tests if the probe-recktangle can be reached. See iss#2366	2015-07-07 06:58:01 -05:00
AnHardt	d421f5250d	Correct the sign of zprobe_zoffset for G29 (PR#@391) ... Sign flipped with #2167. See also comments https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355 and following.	2015-07-07 06:55:33 -05:00
Scott Lahteine	52fcc743ab	Replace "target" with "destination" in M600 (PR#2374) ... - Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being used as the index into the `destination[AxisEnum]` array.	2015-07-04 05:55:25 -05:00
Scott Lahteine	a5033c3652	Enable LCD_PIN_RESET if it exists (PR#2375)	2015-07-04 05:53:22 -05:00
AnHardt	23c8c5348f	Z-height fix V2b (PR#2351) ... here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are replaced with `zprobe_zoffset`.	2015-07-02 20:30:40 -05:00
Todd Swindoll	a111fbbd0a	z-probe offset fix (PR#2361) ... verified via 1.0.2 tag that compiles by multiple people, credit for the fix goes to paulusjacobus for the initial find and sniffle for the correction so M851 works.	2015-07-02 20:28:07 -05:00
Scott Lahteine	42465ee444	Cleanup of comments & spacing	2015-06-28 08:20:28 -05:00
Scott Lahteine	9682ed455e	Fix comment on M83, add comment to prepare_move	2015-06-28 08:20:19 -05:00
Scott Lahteine	bb44fe17cf	Fix typo in buzzer.h endif (PR#2337)	2015-06-27 06:10:19 -05:00
AnHardt	36746143a1	Correct output of M48 (PR#2336) ... n_samples is an uint8_t . Got printouts like: 50 of 2 ...	2015-06-27 06:08:40 -05:00
Scott Lahteine	f6ca5a8da8	Allow "M110 N123" without a checksum	2015-06-26 18:13:54 -05:00
Scott Lahteine	aaad65ff5d	Include a comment documenting M110	2015-06-26 18:13:54 -05:00
Scott Lahteine	862c72b030	Put the mandatory test of gcode_N first	2015-06-26 18:13:54 -05:00
Scott Lahteine	30976f9773	Allow M110 to handle a second N argument	2015-06-26 18:13:53 -05:00
Scott Lahteine	d135b15bb8	Init all endstop bits to 0 (PR#2332)	2015-06-26 07:10:22 -05:00
Scott Lahteine	5ccb1c9e7d	Use millis for M600 audio feedback interval	2015-06-25 20:45:03 -05:00
Scott Lahteine	fb16a83b8a	Cleanup M600 documentation comments	2015-06-25 20:45:03 -05:00
Scott Lahteine	97ec224d72	Replace target with destination in M600	2015-06-25 20:45:03 -05:00
Scott Lahteine	4ce9ddbb74	Check the temperature before filament change	2015-06-25 20:45:03 -05:00
Jaime van Kessel	b8b5762e55	Update Ultimaker URL	2015-06-25 09:12:44 -05:00
Jaime van Kessel	d5bfbf5a59	Added correct dutch translation for calibrate.	2015-06-25 09:12:44 -05:00
Scott Lahteine	149c474e55	Updated Russian language (PR#2325) ... Gleaned from https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664 8976eafd1ae220ae	2015-06-22 23:07:19 -04:00
AnHardt	722829b058	Move buzzing code to buzzr.h & buzzer.cpp (PR#2307) ... at least the lcd independent part from Marlin_main.cpp.	2015-06-22 22:31:48 -04:00
AnHardt	c461975140	Rename and repair MELZI_1284 (PR#2301) ... to MELZI_MAKR3D. Fix for #2288 As the normal MELZI also can have a 1284.	2015-06-22 22:30:07 -04:00