Marlin/Marlin
Scott Lahteine 8b3d63c423 Unify Delta XYZ homing rates
As noted in  allen key probe stow rate is based on homing rates,
but homing rates were left out of most delta configs. This unifies the
XYZ homing rates and applies the unified rates to allen key movements.
2015-09-08 13:11:55 -05:00
..
configurator Wrap Dual Y options in a conditional 2015-09-07 09:41:05 -05:00
example_configurations Unify Delta XYZ homing rates 2015-09-08 13:11:55 -05:00
fonts Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
scripts
blinkm.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
blinkm.h Deprecate Support for Arduino IDE < 1.0.5 2015-06-08 17:15:28 -05:00
boards.h add makerlab mega controller pin configs 2015-07-23 22:51:40 -05:00
buzzer.cpp Suppress some compiler warnings 2015-08-16 06:56:47 -05:00
buzzer.h Fix typo in buzzer.h endif (PR#2337) 2015-06-27 06:10:19 -05:00
cardreader.cpp Restore test 2015-08-04 15:22:56 -05:00
cardreader.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
Conditionals.h Disable SDSUPPORT by default 2015-09-06 02:04:49 -05:00
Configuration_adv.h Wrap Dual Y options in a conditional 2015-09-07 09:41:05 -05:00
configuration_store.cpp Rename ENABLE_AUTO_BED_LEVELING 2015-08-27 20:52:08 -05:00
configuration_store.h Overridable Options - Part 11 (PR#2563) 2015-07-31 01:07:04 -05:00
Configuration.h Create DEBUG_LEVELING_FEATURE 2015-08-27 20:52:08 -05:00
Default_Version.h This will be the 1.1.0 Release rather than 1.0.3 2015-08-03 08:08:38 -05:00
digipot_mcp4451.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
dogm_bitmaps.h Make bootscreen configurable for the graphic displays 2015-08-03 07:13:00 -05:00
dogm_font_data_6x9_marlin.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_HD44780_C.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_HD44780_J.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_HD44780_W.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_1.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_5_Cyrillic.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_CN.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_ISO10646_Kana.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_font_data_Marlin_symbols.h update for newest version of U8glib_Arduino 2015-08-26 19:52:59 -05:00
dogm_lcd_implementation.h Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
fastio.h Spacing and spelling 2015-04-03 22:54:48 -07:00
language_an.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_bg.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_ca.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_cn.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_da.h Add Danish translations 2015-08-03 07:06:17 -05:00
language_de.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_en.h Added Extrude From Multiple Extruders from LCD feature 2015-09-05 05:33:18 -05:00
language_es.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_eu.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_fi.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_fr.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_it.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_kana_utf8.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_kana.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_nl.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_pl.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_pt-br.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_pt.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_ru.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language_test.h Overridable Options - Part 3 (PR#2555) 2015-07-31 00:19:13 -05:00
language.h Create DEBUG_LEVELING_FEATURE 2015-08-27 20:52:08 -05:00
M100_Free_Mem_Chk.cpp Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
macros.h Add COUNT macro and apply 2015-07-22 18:16:05 -05:00
Makefile makefile: add buzzer.cpp (PR#2479) 2015-07-30 07:56:44 -05:00
Marlin_main.cpp Trim Adjustments for Delta Configurations 2015-09-03 01:05:33 -05:00
Marlin.h Trim Adjustments for Delta Configurations 2015-09-03 01:05:33 -05:00
Marlin.ino Apply ENABLED / DISABLED to Marlin core files (PR#2558) 2015-07-31 01:03:58 -05:00
MarlinSerial.cpp Use lowercase names for serial instances 2015-08-02 23:01:39 -05:00
MarlinSerial.h Use lowercase names for serial instances 2015-08-02 23:01:39 -05:00
mesh_bed_leveling.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
mesh_bed_leveling.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
pins_3DRAG.h Rename BEEPER to BEEPER_PIN 2015-07-31 17:13:53 -05:00
pins_5DPRINT.h Overridable Options - Part 4 (PR#2556) 2015-07-31 00:44:53 -05:00
pins_99.h
pins_AZTEEG_X1.h
pins_AZTEEG_X3_PRO.h Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) 2015-08-20 06:04:46 -05:00
pins_AZTEEG_X3.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_BAM_DICE_DUE.h Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
pins_BRAINWAVE_PRO.h Update ABL comments (PR#95) 2015-08-26 05:51:38 -05:00
pins_BRAINWAVE.h Overridable Options - Part 4 (PR#2556) 2015-07-31 00:44:53 -05:00
pins_CHEAPTRONIC.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_ELEFU_3.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_FELIX2.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_GEN3_MONOLITHIC.h
pins_GEN3_PLUS.h
pins_GEN6_DELUXE.h
pins_GEN6.h
pins_GEN7_12.h
pins_GEN7_13.h
pins_GEN7_14.h
pins_GEN7_CUSTOM.h Rename BEEPER to BEEPER_PIN 2015-08-02 22:09:08 -05:00
pins_K8200.h
pins_LEAPFROG.h Move Y2 and Z2 pins defines to pins.h 2015-09-07 09:41:06 -05:00
pins_MEGACONTROLLER.h Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
pins_MEGATRONICS_2.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_MEGATRONICS_3.h Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
pins_MEGATRONICS.h Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
pins_MELZI_MAKR3D.h Rename and repair MELZI_1284 (PR#2301) 2015-06-22 22:30:07 -04:00
pins_MELZI.h
pins_MINIRAMBO.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_MINITRONICS.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_MKS_BASE.h Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
pins_OMCA_A.h Rename BEEPER to BEEPER_PIN 2015-08-02 22:09:08 -05:00
pins_OMCA.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_PRINTRBOARD.h Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
pins_RAMBO.h Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
pins_RAMPS_13_EFB.h Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
pins_RAMPS_13.h Move Y2 and Z2 pins defines to pins.h 2015-09-07 09:41:06 -05:00
pins_RAMPS_OLD.h Overridable Options - Part 4 (PR#2556) 2015-07-31 00:44:53 -05:00
pins_RIGIDBOARD.h Make Z_PROBE a Z_MIN_PROBE (PR#65) 2015-08-11 14:41:36 -05:00
pins_RUMBA.h Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) 2015-08-20 06:04:46 -05:00
pins_SANGUINOLOLU_11.h Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
pins_SANGUINOLOLU_12.h Rename and repair MELZI_1284 (PR#2301) 2015-06-22 22:30:07 -04:00
pins_SAV_MKI.h Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
pins_SETHI.h cleanup 2015-01-27 15:32:34 -08:00
pins_STB_11.h
pins_TEENSY2.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_TEENSYLU.h Use lowercase names for serial instances 2015-08-02 23:01:39 -05:00
pins_ULTIMAIN_2.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_ULTIMAKER_OLD.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_ULTIMAKER.h Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
pins.h Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z 2015-09-07 09:41:06 -05:00
planner.cpp Remove extra MAX_FREQ_TIME define (PR#148) 2015-09-08 13:11:12 -05:00
planner.h Rename ENABLE_AUTO_BED_LEVELING 2015-08-27 20:52:08 -05:00
qr_solve.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
qr_solve.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SanityCheck.h Fix error message for probe region sanity check 2015-09-03 03:27:47 -05:00
Sd2Card.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
Sd2Card.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
Sd2PinMap.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdBaseFile.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdBaseFile.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdFatConfig.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdFatStructs.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdFatUtil.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdFatUtil.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdFile.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdFile.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdInfo.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdVolume.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
SdVolume.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
servo.cpp Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
servo.h Some more servo code tweaks 2015-07-24 22:04:49 -05:00
speed_lookuptable.h
stepper_indirection.cpp Overridable Options - Part 8 (PR#2560) 2015-07-31 01:05:22 -05:00
stepper_indirection.h Overridable Options - Part 8 (PR#2560) 2015-07-31 01:05:22 -05:00
stepper.cpp Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) 2015-08-20 06:04:46 -05:00
stepper.h Overridable Options - Part 8 (PR#2560) 2015-07-31 01:05:22 -05:00
temperature.cpp Overridable Options - Part 9 (PR#2561) 2015-07-31 01:05:55 -05:00
temperature.h Overridable Options - Part 9 (PR#2561) 2015-07-31 01:05:55 -05:00
thermistortables.h Update thermistortables for Hisens Thermistor (PR#2588) 2015-08-09 18:11:14 -05:00
ultralcd_implementation_hitachi_HD44780.h Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
ultralcd_st7920_u8glib_rrd.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
ultralcd.cpp Fix lcd_move_e compile error (PR#143) 2015-09-07 09:36:05 -05:00
ultralcd.h Suppress some compiler warnings 2015-08-16 06:56:47 -05:00
utf_mapper.h remove colon in utf_mapper.h (PR#106) 2015-08-27 07:15:23 -05:00
vector_3.cpp Rename ENABLE_AUTO_BED_LEVELING 2015-08-27 20:52:08 -05:00
vector_3.h Rename ENABLE_AUTO_BED_LEVELING 2015-08-27 20:52:08 -05:00
watchdog.cpp Overridable Options - Part 5 2015-07-31 01:24:20 -05:00
watchdog.h Overridable Options - Part 5 2015-07-31 01:24:20 -05:00