MBL: Move border macros to Configuration_adv.h

2016-05-30 20:50:16 +02:00 · 2016-05-30 20:50:16 +02:00 · 06593833ff
commit 06593833ff
parent 5a8918c9ec
17 changed files with 192 additions and 4 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 1.75
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -451,6 +451,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 1.75
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 1.75
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -453,6 +453,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 1.75
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@ -447,6 +447,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -447,6 +447,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -446,6 +446,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -451,6 +451,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -447,6 +447,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -445,6 +445,18 @@
  #define D_FILAMENT 2.85
 #endif

+// @section leveling
+
+// Default mesh area is an area with an inset margin on the print area.
+// Below are the macros that are used to define the borders for the mesh area,
+// made available here for specialized needs, ie dual extruder setup.
+#if ENABLED(MESH_BED_LEVELING)
+  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
+  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
+  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
+  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
+#endif
+
 // @section extras

 // Arc interpretation settings:
--- a/Marlin/mesh_bed_leveling.h
+++ b/Marlin/mesh_bed_leveling.h
@ -24,10 +24,6 @@

 #if ENABLED(MESH_BED_LEVELING)

-  #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
-  #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
-  #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
-  #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
  #define MESH_X_DIST ((MESH_MAX_X - (MESH_MIN_X))/(MESH_NUM_X_POINTS - 1))
  #define MESH_Y_DIST ((MESH_MAX_Y - (MESH_MIN_Y))/(MESH_NUM_Y_POINTS - 1))