Add support for Printrboard RevF
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control. The Pins file for the RevF board is included.2.0.x
Stephanie
9 years ago
committed by
Scott Lahteine
parent
7f2375ab46
commit
6843b78f99
@ -0,0 +1,115 @@
|
||||
/*
|
||||
|
||||
mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
|
||||
For implementation details, please take a look at the datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
|
||||
For discussion and feedback, please go to http://arduino.cc/forum/index.php/topic,51842.0.html
|
||||
*/
|
||||
|
||||
|
||||
/* _____PROJECT INCLUDES_____________________________________________________ */
|
||||
#include "dac_mcp4728.h"
|
||||
|
||||
#if ENABLED(DAC_STEPPER_CURRENT)
|
||||
|
||||
// Used Global variables
|
||||
uint16_t mcp4728_values[4];
|
||||
|
||||
/*
|
||||
Begin I2C, get current values (input register and eeprom) of mcp4728
|
||||
*/
|
||||
void mcp4728_init() {
|
||||
Wire.begin();
|
||||
Wire.requestFrom(int(DAC_DEV_ADDRESS), 24);
|
||||
while(Wire.available()) {
|
||||
int deviceID = Wire.receive();
|
||||
int hiByte = Wire.receive();
|
||||
int loByte = Wire.receive();
|
||||
|
||||
int isEEPROM = (deviceID & 0B00001000) >> 3;
|
||||
int channel = (deviceID & 0B00110000) >> 4;
|
||||
if (isEEPROM != 1) {
|
||||
mcp4728_values[channel] = word((hiByte & 0B00001111), loByte);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
Write input resister value to specified channel using fastwrite method.
|
||||
Channel : 0-3, Values : 0-4095
|
||||
*/
|
||||
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) {
|
||||
mcp4728_values[channel] = value;
|
||||
return mcp4728_fastWrite();
|
||||
}
|
||||
/*
|
||||
Write all input resistor values to EEPROM using SequencialWrite method.
|
||||
This will update both input register and EEPROM value
|
||||
This will also write current Vref, PowerDown, Gain settings to EEPROM
|
||||
*/
|
||||
uint8_t mcp4728_eepromWrite() {
|
||||
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||
Wire.send(SEQWRITE);
|
||||
for (uint8_t channel=0; channel <= 3; channel++) {
|
||||
Wire.send(DAC_STEPPER_VREF << 7 | 0 << 5 | DAC_STEPPER_GAIN << 4 | highByte(mcp4728_values[channel]));
|
||||
Wire.send(lowByte(mcp4728_values[channel]));
|
||||
}
|
||||
return Wire.endTransmission();
|
||||
}
|
||||
|
||||
/*
|
||||
Write Voltage reference setting to all input regiters
|
||||
*/
|
||||
uint8_t mcp4728_setVref_all(uint8_t value) {
|
||||
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||
Wire.send(VREFWRITE | value << 3 | value << 2 | value << 1 | value);
|
||||
return Wire.endTransmission();
|
||||
}
|
||||
/*
|
||||
Write Gain setting to all input regiters
|
||||
*/
|
||||
uint8_t mcp4728_setGain_all(uint8_t value) {
|
||||
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||
Wire.send(GAINWRITE | value << 3 | value << 2 | value << 1 | value);
|
||||
return Wire.endTransmission();
|
||||
}
|
||||
|
||||
/*
|
||||
Return Input Regiter value
|
||||
*/
|
||||
uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; }
|
||||
|
||||
/*
|
||||
// Steph: Might be useful in the future
|
||||
// Return Vout
|
||||
uint16_t mcp4728_getVout(uint8_t channel) {
|
||||
uint32_t vref = 2048;
|
||||
uint32_t vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
|
||||
if (vOut > defaultVDD) vOut = defaultVDD;
|
||||
return vOut;
|
||||
}
|
||||
*/
|
||||
|
||||
/*
|
||||
FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1
|
||||
DAC Input and PowerDown bits update.
|
||||
No EEPROM update
|
||||
*/
|
||||
uint8_t mcp4728_fastWrite() {
|
||||
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||
for (uint8_t channel=0; channel <= 3; channel++) {
|
||||
Wire.send(highByte(mcp4728_values[channel]));
|
||||
Wire.send(lowByte(mcp4728_values[channel]));
|
||||
}
|
||||
return Wire.endTransmission();
|
||||
}
|
||||
|
||||
/*
|
||||
Common function for simple general commands
|
||||
*/
|
||||
uint8_t mcp4728_simpleCommand(byte simpleCommand) {
|
||||
Wire.beginTransmission(GENERALCALL);
|
||||
Wire.send(simpleCommand);
|
||||
return Wire.endTransmission();
|
||||
}
|
||||
|
||||
#endif // DAC_STEPPER_CURRENT
|
||||
@ -0,0 +1,44 @@
|
||||
/**
|
||||
Arduino library for MicroChip MCP4728 I2C D/A converter.
|
||||
*/
|
||||
|
||||
#ifndef mcp4728_h
|
||||
#define mcp4728_h
|
||||
|
||||
#include "Configuration.h"
|
||||
#include "Configuration_adv.h"
|
||||
|
||||
#if ENABLED(DAC_STEPPER_CURRENT)
|
||||
#include "WProgram.h"
|
||||
#include "Wire.h"
|
||||
//#include <Wire.h>
|
||||
|
||||
#define defaultVDD 5000
|
||||
#define BASE_ADDR 0x60
|
||||
#define RESET 0B00000110
|
||||
#define WAKE 0B00001001
|
||||
#define UPDATE 0B00001000
|
||||
#define MULTIWRITE 0B01000000
|
||||
#define SINGLEWRITE 0B01011000
|
||||
#define SEQWRITE 0B01010000
|
||||
#define VREFWRITE 0B10000000
|
||||
#define GAINWRITE 0B11000000
|
||||
#define POWERDOWNWRITE 0B10100000
|
||||
#define GENERALCALL 0B0000000
|
||||
#define GAINWRITE 0B11000000
|
||||
|
||||
// This is taken from the original lib, makes it easy to edit if needed
|
||||
#define DAC_DEV_ADDRESS (BASE_ADDR | 0x00)
|
||||
|
||||
void mcp4728_init();
|
||||
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value);
|
||||
uint8_t mcp4728_eepromWrite();
|
||||
uint8_t mcp4728_setVref_all(uint8_t value);
|
||||
uint8_t mcp4728_setGain_all(uint8_t value);
|
||||
uint16_t mcp4728_getValue(uint8_t channel);
|
||||
uint8_t mcp4728_fastWrite();
|
||||
uint8_t mcp4728_simpleCommand(byte simpleCommand);
|
||||
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -0,0 +1,134 @@
|
||||
/**
|
||||
* Printrboard pin assignments (AT90USB1286)
|
||||
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!
|
||||
* http://www.pjrc.com/teensy/teensyduino.html
|
||||
* See http://reprap.org/wiki/Printrboard for more info
|
||||
*/
|
||||
|
||||
#ifndef __AVR_AT90USB1286__
|
||||
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
|
||||
#endif
|
||||
|
||||
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
|
||||
#error These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
|
||||
#endif
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 0
|
||||
#define X_DIR_PIN 1
|
||||
#define X_ENABLE_PIN 39
|
||||
|
||||
#define Y_STEP_PIN 2
|
||||
#define Y_DIR_PIN 3
|
||||
#define Y_ENABLE_PIN 38
|
||||
|
||||
#define Z_STEP_PIN 4
|
||||
#define Z_DIR_PIN 5
|
||||
#define Z_ENABLE_PIN 23
|
||||
|
||||
#define E0_STEP_PIN 6
|
||||
#define E0_DIR_PIN 7
|
||||
#define E0_ENABLE_PIN 19
|
||||
|
||||
#define HEATER_0_PIN 21 // Extruder
|
||||
#define HEATER_1_PIN 46
|
||||
#define HEATER_2_PIN 47
|
||||
#define HEATER_BED_PIN 20
|
||||
|
||||
// If soft or fast PWM is off then use Teensyduino pin numbering, Marlin
|
||||
// fastio pin numbering otherwise
|
||||
#if ENABLED(FAN_SOFT_PWM) || ENABLED(FAST_PWM_FAN)
|
||||
#define FAN_PIN 22
|
||||
#else
|
||||
#define FAN_PIN 16
|
||||
#endif
|
||||
|
||||
#define X_STOP_PIN 35
|
||||
#define Y_STOP_PIN 12
|
||||
#define Z_STOP_PIN 36
|
||||
|
||||
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
|
||||
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
|
||||
|
||||
#if ENABLED(FILAMENT_SENSOR)
|
||||
#define FILWIDTH_PIN 2
|
||||
#endif
|
||||
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
|
||||
////LCD Pin Setup////
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS 20 // Teensylu pin mapping
|
||||
#define LED_PIN -1
|
||||
#define PS_ON_PIN -1
|
||||
#define KILL_PIN -1
|
||||
#define ALARM_PIN -1
|
||||
|
||||
// uncomment to enable an I2C based DAC like on the Printrboard REVF
|
||||
#define DAC_STEPPER_CURRENT
|
||||
// Number of channels available for DAC, For Printrboar REVF there are 4
|
||||
#define DAC_STEPPER_ORDER {3,2,1,0}
|
||||
|
||||
#define DAC_STEPPER_SENSE 0.11
|
||||
#define DAC_STEPPER_ADDRESS 0
|
||||
#define DAC_STEPPER_MAX 3520
|
||||
#define DAC_STEPPER_VREF 1 //internal Vref, gain 1x = 2.048V
|
||||
#define DAC_STEPPER_GAIN 0
|
||||
|
||||
#if DISABLED(SDSUPPORT)
|
||||
// these pins are defined in the SD library if building with SD support
|
||||
#define SCK_PIN 9
|
||||
#define MISO_PIN 11
|
||||
#define MOSI_PIN 10
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#define BEEPER_PIN -1
|
||||
|
||||
#define LCD_PINS_RS 9
|
||||
#define LCD_PINS_ENABLE 8
|
||||
#define LCD_PINS_D4 7
|
||||
#define LCD_PINS_D5 6
|
||||
#define LCD_PINS_D6 5
|
||||
#define LCD_PINS_D7 4
|
||||
|
||||
#define BTN_EN1 16
|
||||
#define BTN_EN2 17
|
||||
#define BTN_ENC 18//the click
|
||||
|
||||
#define BLEN_C 2
|
||||
#define BLEN_B 1
|
||||
#define BLEN_A 0
|
||||
|
||||
#define SD_DETECT_PIN -1
|
||||
|
||||
//encoder rotation values
|
||||
#define encrot0 0
|
||||
#define encrot1 2
|
||||
#define encrot2 3
|
||||
#define encrot3 1
|
||||
#endif
|
||||
|
||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||
#define BEEPER_PIN 32 //FastIO
|
||||
// Pins for DOGM SPI LCD Support
|
||||
#define DOGLCD_A0 42 //Non-FastIO
|
||||
#define DOGLCD_CS 43 //Non-FastIO
|
||||
#define LCD_SCREEN_ROT_180
|
||||
|
||||
//The encoder and click button (FastIO Pins)
|
||||
#define BTN_EN1 26
|
||||
#define BTN_EN2 27
|
||||
#define BTN_ENC 47 //the click switch
|
||||
|
||||
#define SDSS 45
|
||||
#define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
|
||||
|
||||
#if ENABLED(TEMP_STAT_LEDS)
|
||||
#define STAT_LED_RED 12 //Non-FastIO
|
||||
#define STAT_LED_BLUE 10 //Non-FastIO
|
||||
#endif
|
||||
#endif
|
||||
Loading…
Reference in New Issue