You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
45 lines
4.6 KiB
Markdown
45 lines
4.6 KiB
Markdown
# Serial port architecture in Marlin
|
|
|
|
Marlin is targeting a pletora of different CPU architecture and platforms. Each of these platforms has its own serial interface.
|
|
While many provide a Arduino-like Serial class, it's not all of them, and the differences in the existing API create a very complex brain teaser for writing code that works more or less on each platform.
|
|
|
|
Moreover, many platform have intrinsic needs about serial port (like forwarding the output on multiple serial port, providing a *serial-like* telnet server, mixing USB-based serial port with SD card emulation) that are difficult to handle cleanly in the other platform serial logic.
|
|
|
|
|
|
Starting with version `2.0.9`, Marlin provides a common interface for its serial needs.
|
|
|
|
## Common interface
|
|
|
|
This interface is declared in `Marlin/src/core/serial_base.h`
|
|
Any implementation will need to follow this interface for being used transparently in Marlin's codebase.
|
|
|
|
The implementation was written to prioritize performance over abstraction, so the base interface is not using virtual inheritance to avoid the cost of virtual dispatching while calling methods.
|
|
Instead, the Curiously Recurring Template Pattern (**CRTP**) is used so that, upon compilation, the interface abstraction does not incur a performance cost.
|
|
|
|
Because some platform do not follow the same interface, the missing method in the actual low-level implementation are detected via SFINAE and a wrapper is generated when such method are missing. See `CALL_IF_EXISTS` macro in `Marlin/src/core/macros.h` for the documentation of this technic.
|
|
|
|
## Composing the desired feature
|
|
The different specificities for each architecture are provided by composing the serial type based on desired functionality.
|
|
In the `Marlin/src/core/serial_hook.h` file, the different serial feature are declared and defined in each templated type:
|
|
1. `BaseSerial` is a simple 1:1 wrapper to the underlying, Arduino compatible, `Serial`'s class. It derives from it. You'll use this if the platform does not do anything specific for the `Serial` object (for example, if an interrupt callback calls directly the serial **instance** in the platform's framework code, this is not the right class to use). This wrapper is completely inlined so that it does not generate any code upon compilation. `BaseSerial` constructor forwards any parameter to the platform's `Serial`'s constructor.
|
|
2. `ForwardSerial` is a composing wrapper. It references an actual Arduino compatible `Serial` instance. You'll use this if the instance is declared in the platform's framework and is being referred directly in the framework. This is not as efficient as the `BaseSerial` implementation since static dereferencing is done for each method call (it'll still be faster than virtual dispatching)
|
|
3. `ConditionalSerial` is working a bit like the `ForwardSerial` interface, but it checks a boolean condition before calling the referenced instance. You'll use it when the serial output can be switch off at runtime, for example in a *telnet* like serial output that should not emit any packet if no client is connected.
|
|
4. `RuntimeSerial` is providing a runtime-modifiable hooking method for its `write` and `msgDone` method. You'll use it if you need to capture the serial output of Marlin, for example to display the G-Code parser's output on a GUI interface. The hooking interface is setup via the `setHook` method.
|
|
5. `MultiSerial` is a runtime modifiable serial output multiplexer. It can output (*respectively input*) to 2 different interface based on a port *mask*. You'll use this if you need to output the same serial stream to multiple port. You can plug a `MultiSerial` to itself to duplicate to more than 2 ports.
|
|
|
|
## Plumbing
|
|
Since all the types above are using CRTP, it's possible to combine them to get the appropriate functionality.
|
|
This is easily done via type definition of the feature.
|
|
|
|
For example, to present a serial interface that's outputting to 2 serial port, the first one being hooked at runtime and the second one connected to a runtime switchable telnet client, you'll declare the type to use as:
|
|
```
|
|
typedef MultiSerial< RuntimeSerial<Serial>, ConditionalSerial<TelnetClient> > Serial0Type;
|
|
```
|
|
|
|
## Emergency parser
|
|
By default, the serial base interface provide an emergency parser that's only enable for serial classes that support it.
|
|
Because of this condition, all underlying type takes a first `bool emergencyParserEnabled` argument to their constructor. You must take into account this parameter when defining the actual type used.
|
|
|
|
|
|
*This document was written by [X-Ryl669](https://blog.cyril.by) and is under [CC-SA license](https://creativecommons.org/licenses/by-sa)*
|