664 Commits (c430906d3b4e49044494fa6c1ea76ec2354b1100)

 

All Branches   

Search

Author	SHA1	Message	Date
Johann Rocholl	c430906d3b	Deltabot settings and configuration adjustments.	12 years ago
Daid	fcd9de72ef	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	12 years ago
Daid	32d4373e0f	Add printrboard and brainwave to Makefile.	12 years ago
daid	b3ddbcee2a	Merge pull request #329 from jcrocholl/Marlin_v1 ... Add Printrboard and Brainwave to pins.h and fastio.h	12 years ago
Daid	29435dfb4b	Proper avr for Sanguino in Makefile.	12 years ago
Daid	ca7acbe6d9	Allow specification of which arduino hardware subvariant in Makefile.	12 years ago
Johann Rocholl	33247733e0	Teensylu and Printrboard use different analog pins for thermistors.	12 years ago
Johann Rocholl	621c24a10f	AT90USB is only defined after pins.h is included.	12 years ago
Johann Rocholl	6cba11f087	Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.	12 years ago
Johann Rocholl	4d351b4846	Improved formatting and comments for consistency.	12 years ago
Johann Rocholl	a30007caa4	If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.	12 years ago
Johann Rocholl	6aa87a7b67	Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.	12 years ago
Johann Rocholl	b1c38d4c82	Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.	12 years ago
Johann Rocholl	42e21bb06e	Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter).	12 years ago
Johann Rocholl	ce4b5bbeaa	Add AT90USB646 support from Sprinter to fastio.h.	12 years ago
Daid	f413aa33b3	Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.	12 years ago
daid303	587154c01b	Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.	12 years ago
daid303	1f27870d41	Fix compiling the watchdog error message when the manual reset watchdog is used.	12 years ago
daid303	c5d4225804	Mistake there, not sure why I did that. My bad.	12 years ago
daid303	529748894c	Minor changes in the temperature code for some cleanup.	12 years ago
daid303	4e26ecc940	The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.	12 years ago
daid303	c421774422	The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.	12 years ago
daid303	16078e47d4	Fixed #325	12 years ago
daid303	6a9bee27cc	Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.	12 years ago
daid303	94ea26ff46	Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.	12 years ago
daid303	6c51fe5039	Fix the bug where the SD percentage calculation is wrong when the file is larger then 42MB	12 years ago
daid	34b2de4cd8	Merge pull request #320 from brupje/patch-1 ... Fix for keypad	12 years ago
brupje	57429cb9fe	Fix for keypad	12 years ago
daid303	97fa2a9c30	Few simple fixes that save RAM, as static strings are stored in RAM by default.	12 years ago
Daid	c94ca24adc	Fixed #317	12 years ago
Daid	99e9554edd	Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants.	12 years ago
Erik vd Zalm	dbbf050005	More rambo fixes	12 years ago
Erik vd Zalm	f934d0ef5b	Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1 ... Conflicts: Marlin/Configuration.h	12 years ago
Erik vd Zalm	e48dfcc2b3	Tmp copy before merge	12 years ago
Erik vd Zalm	b98fb17fe9	Small FREQUENCY_LIMIT changes	12 years ago
daid	bce67ec2c9	Merge pull request #312 from gege2b/Marlin_v1 ... Added french translation	12 years ago
Gege	9b1d2483a0	I hope last changes to french translation	12 years ago
Gege	b1adc567da	Correction to french translation (non-ASCII chars only)	12 years ago
Gege	0807d82af0	Correction to french translation (plain text only)	12 years ago
Erik vd Zalm	5cd7a90b32	Added new temperature lookup table creation tool. This one uses stein hart-hart equations. ... You need 3 temperature resistance:combinations. This gives a better result then using beta.	12 years ago
gege2b	bb119739b0	Added french translation	12 years ago
daid	df8dd5ac21	Merge pull request #306 from nothinman/Marlin_v1 ... Added automatic build numbering.	12 years ago
daid	b7c8e5bbcf	Merge pull request #308 from MStohn/Marlin_v1 ... FIX: Allow marlin internal 0°C represenation	12 years ago
MaikStohn	2b7b1e52b1	allow marlin internal 0°C represenation	12 years ago
Martin Lukasik	2f771b3979	Added automatic build numbering.	12 years ago
daid	9bebe9b631	Merge pull request #302 from nothinman/Marlin_v1 ... Added Polish translation. Cosmetic changes to English.	12 years ago
daid303	a2032afa3a	Fixed #303	12 years ago
Martin Lukasik	6a55ca8370	Added Polish translation. Cosmetic changes to English.	12 years ago
daid303	8f20562f49	Fix some of the crowded code style. And fixed the conditional. #300	12 years ago
daid303	43018a48c4	Fix for a few -Wextra warnings.	12 years ago