melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
10,064 Commits
2 Branches
0 Tags
2.0 GiB
x301
2.0.x
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'b756a15aba'
${ noResults }
Commit Graph

837 Commits (b756a15abae35946dcb6b41261926e7233fde2cf)

Author SHA1 Message Date
Scott Lahteine dd2949922b Consolidate 3-point leveling point options 7 years ago
Scott Lahteine c6ff39cc14 Spacing cleanup 7 years ago
Scott Lahteine 14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 7 years ago
Scott Lahteine 28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058) 
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 7 years ago
Scott Lahteine 419d12ca1b Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 7 years ago
Scott Lahteine a2a672449a Updated boot screen description 7 years ago
Scott Lahteine 4953fb1c88 Standardize encoder defaults 7 years ago
Scott Lahteine 5684beae90 Bring some configs up to speed 7 years ago
Scott Lahteine 2024775e07
Spanish (UTF8) Language (#9786) 
From #7314 by @MrAmericanMike
 7 years ago
Scott Lahteine b2cf253a13 Add RESTORE_LEVELING_AFTER_G28 option 7 years ago
Marcio Teixeira 13176dfe2f Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status 7 years ago
Marcio Teixeira 716a22498f Changed temp type from uint8_t to int16_t 
- Also deleted old implementation files which had been renamed.
 7 years ago
Scott Lahteine 7d8c6b3f3c
Add 20x4 option for Sainsmart LCD (#9740) 7 years ago
Marcio Teixeira aada1e698f Removed unused configuration options. 7 years ago
Marcio Teixeira c7513eb032 Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status 7 years ago
Studiodyne d3ca82d8c2 Support for multiple filament runout sensors 7 years ago
Scott Lahteine ca55f2927a
Pulldown pin mode support (#9701) 
Implemented for LPC1768.
 7 years ago
Scott Lahteine 79272f98fc Proposed changes to ST7920 lightweight status screen 7 years ago
Marcio Teixeira 24eb275b99 Added a light-weight status screen for the ST7920 
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
 7 years ago
Scott Lahteine 08d685c97a Followup to 21e60fd 7 years ago
Roxy-3D 21e60fd3ed
Allow user to control Z-Height correction for off mesh movements (#9661) 7 years ago
Marcio Teixeira 4880ac6533 Added a light-weight status screen for the ST7920 
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
 7 years ago
Scott Lahteine 2ec65051fd Fix serial comment sp. 7 years ago
Scott Lahteine 2014d38e10 NEOPIXEL_BRIGHTNESS parity 7 years ago
Scott Lahteine b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 7 years ago
Scott Lahteine 16739264d3 Add UltiController v2.1 support 
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
 7 years ago
Scott Lahteine 4925f60cff Add MALYAN_LCD to configs 7 years ago
Scott Lahteine 7d6c009104 Add thermistor 15 tuned for JGAurora A5 7 years ago
Scott Lahteine 348b454401 Probe bounds based on bed size 7 years ago
Scott Lahteine 58ed9901d7 Consistent NEOPIXEL_TYPE options 7 years ago
Scott Lahteine fa432508b0 Followup to Ender config 7 years ago
Scott Lahteine 048486390e Bring some configs up to date 7 years ago
Thomas Moore f7efac57b7 Multi-host support 7 years ago
GMagician 5295b4713d [2.0.x] add semitec 104NT-4 (#9119) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 7 years ago
Scott Lahteine 0b4a46fa6c Bring configs up to date with 1.1.x 7 years ago
Thomas Moore f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 7 years ago
Scott Lahteine 28fc8741d6 Reduce default jerk. XY by half. Z by 1/4 7 years ago
Even ea1a8d1223 add original RADDS LCD + Controller 
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
 7 years ago
Dan Delaney b055d8c39c [2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814) 
* Adding support for using the MKS_12864OLED with the SSD1306 controller

* Update comment for correct controller type
 7 years ago
Scott Lahteine 15d05748df Adding support for the Tronxy and Zonestar LCD 7 years ago
Scott Lahteine 69d49a2438 Shorter segments may be better 7 years ago
Scott Lahteine ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 7 years ago
Richard Wackerbarth c1184552ac Change K1 to required option PID_K1 7 years ago
Scott Lahteine aa7efb96bf Bring configurations up to date 7 years ago
Scott Lahteine 0154e3480c New feature: BED_SKEW_CORRECTION 7 years ago
Scott Lahteine ef2531558c Add an option to segment leveled moves 7 years ago
Scott Lahteine 5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 7 years ago
Scott Lahteine 5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 7 years ago
Scott Lahteine 3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 7 years ago
Scott Lahteine b76e173205 Move test extrusion options under G26 7 years ago