fixed some format problems and cleaned code

Marlin/pins_MEGACONTROLLER.h

@@ -6,127 +6,107 @@
   #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
 #endif
 
-#if EXTRUDERS > 3
+#if EXTRUDERS > 2
-  #error RUMBA supports up to 3 extruders. Comment this line to keep going.
+  #error Mega Controller supports up to 2 extruders. Comment this line to keep going.
 #endif
- #define X_STEP_PIN 62//A8
+#define X_STEP_PIN 62//A8
- #define X_DIR_PIN 63//A9
+#define X_DIR_PIN 63//A9
- #define X_ENABLE_PIN 61//A7
+#define X_ENABLE_PIN 61//A7
-#ifdef DELTA
+#define X_MIN_PIN 43
- #define X_MIN_PIN -1
+#define X_MAX_PIN 42 //Max endstops default to disabled "-1", set to commented value to enable.
+
+#define Y_STEP_PIN 65 // A11
+#define Y_DIR_PIN 66 // A12
+#define Y_ENABLE_PIN 64//A10
+#define Y_MIN_PIN 38
+#define Y_MAX_PIN 41 
+
+#define Z_STEP_PIN 68 // A14
+#define Z_DIR_PIN 69 // A15
+#define Z_ENABLE_PIN 67 // A13
+#define Z_MIN_PIN 40
+#define Z_MAX_PIN 37
+
+#define E0_STEP_PIN 23
+#define E0_DIR_PIN 24
+#define E0_ENABLE_PIN 22
+
+#define E1_STEP_PIN 26
+#define E1_DIR_PIN 27
+#define E1_ENABLE_PIN 25
+
+#define SDPOWER -1
+#define SDSS 53
+#define LED_PIN 13
+
+#define FAN_PIN 39
+#define FAN1_PIN 35
+#define FAN2_PIN 36
+#define FAN_SOFT_PWM
+#define CONTROLLERFAN_PIN 36
+#define PS_ON_PIN -1
+#define KILL_PIN -1
+
+#define HEATER_0_PIN 29 // EXTRUDER 1
+#define HEATER_1_PIN 34 // EXTRUDER 2
+#define HEATER_2_PIN -1
+
+#if TEMP_SENSOR_0 == -1
+  #define TEMP_0_PIN 4 // ANALOG NUMBERING
 #else
- #define X_MIN_PIN 43
+  #define TEMP_0_PIN 0 // ANALOG NUMBERING
-#endif //DELTA
+#endif
- #define X_MAX_PIN 42 //2 //Max endstops default to disabled "-1", set to commented value to enable.
 
- #define Y_STEP_PIN 65 // A11
+
- #define Y_DIR_PIN 66 // A12
+#if TEMP_SENSOR_1 == -1
- #define Y_ENABLE_PIN 64//A10
+  #define TEMP_1_PIN 5 // ANALOG NUMBERING
-#ifdef DELTA
- #define Y_MIN_PIN -1
 #else
- #define Y_MIN_PIN 38
+  #define TEMP_1_PIN 2 // ANALOG NUMBERING
-#endif //DELTA
+#endif
- #define Y_MAX_PIN 41 //15
 
- #define Z_STEP_PIN 68 // A14
+#define TEMP_2_PIN 3 // ANALOG NUMBERING
- #define Z_DIR_PIN 69 // A15
- #define Z_ENABLE_PIN 67 // A13
- #define Z_MIN_PIN 40
- #define Z_MAX_PIN 37
 
- #define E0_STEP_PIN 23
+#define HEATER_BED_PIN 28 // BED
- #define E0_DIR_PIN 24
- #define E0_ENABLE_PIN 22
 
- #define E1_STEP_PIN 26
+#if TEMP_SENSOR_BED == -1
- #define E1_DIR_PIN 27
+  #define TEMP_BED_PIN 6 // ANALOG NUMBERING
- #define E1_ENABLE_PIN 25
+#else
+  #define TEMP_BED_PIN 1 // ANALOG NUMBERING
+#endif
 
- #define SDPOWER -1
+#ifdef NUM_SERVOS
- #define SDSS 53
+   #define SERVO0_PIN         30
- #define LED_PIN 13
 
- #define FAN_PIN 39
+   #if NUM_SERVOS > 1
- #define FAN1_PIN 35
+     #define SERVO1_PIN         31
- #define FAN2_PIN 36
+     #if NUM_SERVOS > 2
- #define FAN_SOFT_PWM
+       #define SERVO2_PIN         32
- #define CONTROLLERFAN_PIN 36
+       #if NUM_SERVOS > 3
- #define PS_ON_PIN -1
+         #define SERVO3_PIN         33
- #define KILL_PIN -1
+       #endif
+     #endif
+   #endif
+#endif// NUM_SERVOS
 
- #define HEATER_0_PIN 29 // EXTRUDER 1
+#ifdef MINIPANEL
- #define HEATER_1_PIN 34 // EXTRUDER 2
+    #define BEEPER 46
- #define HEATER_2_PIN -1
+    // Pins for DOGM SPI LCD Support
-
+    #define DOGLCD_A0  47
- #if TEMP_SENSOR_0 == -1
+    #define DOGLCD_CS  45
-   #define TEMP_0_PIN 4 // ANALOG NUMBERING
+    #define LCD_PIN_BL 44  // backlight LED on PA3
- #else
+    
-   #define TEMP_0_PIN 0 // ANALOG NUMBERING
+    #define KILL_PIN 12
- #endif
+    // GLCD features
-
+    //#define LCD_CONTRAST 190
-
+    // Uncomment screen orientation
- #if TEMP_SENSOR_1 == -1
+      // #define LCD_SCREEN_ROT_90
-   #define TEMP_1_PIN 5 // ANALOG NUMBERING
+      // #define LCD_SCREEN_ROT_180
- #else
+      // #define LCD_SCREEN_ROT_270
-   #define TEMP_1_PIN 2 // ANALOG NUMBERING
+    //The encoder and click button
- #endif
+    #define BTN_EN1 48
-
+    #define BTN_EN2 11
- #define TEMP_2_PIN 3 // ANALOG NUMBERING
+    #define BTN_ENC 10  //the click switch
-
+    //not connected to a pin
- #define HEATER_BED_PIN 28 // BED
+    #define SDCARDDETECT 49
-
+#endif //Minipanel
- #if TEMP_SENSOR_BED == -1
-   #define TEMP_BED_PIN 6 // ANALOG NUMBERING
- #else
-   #define TEMP_BED_PIN 1 // ANALOG NUMBERING
- #endif
- 
- #ifdef NUM_SERVOS
-    #define SERVO0_PIN         30
-
-    #if NUM_SERVOS > 1
-      #define SERVO1_PIN         31
-    #endif
-
-    #if NUM_SERVOS > 2
-      #define SERVO2_PIN         32
-    #endif
-
-    #if NUM_SERVOS > 3
-      #define SERVO3_PIN         33
-    #endif
-  #endif
-
- #ifdef MINIPANEL
-     #define BEEPER 46
-     // Pins for DOGM SPI LCD Support
-     #define DOGLCD_A0  47
-     #define DOGLCD_CS  45
-     #define LCD_PIN_BL 44  // backlight LED on PA3
-     
-     #define KILL_PIN 12
-     // GLCD features
-     //#define LCD_CONTRAST 190
-     // Uncomment screen orientation
-       // #define LCD_SCREEN_ROT_90
-       // #define LCD_SCREEN_ROT_180
-       // #define LCD_SCREEN_ROT_270
-     //The encoder and click button
-     #define BTN_EN1 48
-     #define BTN_EN2 11
-     #define BTN_ENC 10  //the click switch
-     //not connected to a pin
-     #define SDCARDDETECT 49
- #endif //Minipanel
-
-
-   //encoder rotation values
- #define encrot0 0
- #define encrot1 2
- #define encrot2 3
- #define encrot3 1
-
-
-#define SERVO0_PIN         5