From 8ac5e569345ce0f284ab1e6b4b094fe42f9c1d92 Mon Sep 17 00:00:00 2001 From: AndySze Date: Thu, 23 Jul 2015 15:39:44 +0800 Subject: [PATCH] fixed some format problems and cleaned code --- Marlin/pins_MEGACONTROLLER.h | 206 ++++++++++++++++------------------- 1 file changed, 93 insertions(+), 113 deletions(-) diff --git a/Marlin/pins_MEGACONTROLLER.h b/Marlin/pins_MEGACONTROLLER.h index 3910672755..2bda001bdf 100644 --- a/Marlin/pins_MEGACONTROLLER.h +++ b/Marlin/pins_MEGACONTROLLER.h @@ -6,127 +6,107 @@ #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. #endif -#if EXTRUDERS > 3 - #error RUMBA supports up to 3 extruders. Comment this line to keep going. +#if EXTRUDERS > 2 + #error Mega Controller supports up to 2 extruders. Comment this line to keep going. #endif - #define X_STEP_PIN 62//A8 - #define X_DIR_PIN 63//A9 - #define X_ENABLE_PIN 61//A7 -#ifdef DELTA - #define X_MIN_PIN -1 +#define X_STEP_PIN 62//A8 +#define X_DIR_PIN 63//A9 +#define X_ENABLE_PIN 61//A7 +#define X_MIN_PIN 43 +#define X_MAX_PIN 42 //Max endstops default to disabled "-1", set to commented value to enable. + +#define Y_STEP_PIN 65 // A11 +#define Y_DIR_PIN 66 // A12 +#define Y_ENABLE_PIN 64//A10 +#define Y_MIN_PIN 38 +#define Y_MAX_PIN 41 + +#define Z_STEP_PIN 68 // A14 +#define Z_DIR_PIN 69 // A15 +#define Z_ENABLE_PIN 67 // A13 +#define Z_MIN_PIN 40 +#define Z_MAX_PIN 37 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 24 +#define E0_ENABLE_PIN 22 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 27 +#define E1_ENABLE_PIN 25 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 + +#define FAN_PIN 39 +#define FAN1_PIN 35 +#define FAN2_PIN 36 +#define FAN_SOFT_PWM +#define CONTROLLERFAN_PIN 36 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 29 // EXTRUDER 1 +#define HEATER_1_PIN 34 // EXTRUDER 2 +#define HEATER_2_PIN -1 + +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 4 // ANALOG NUMBERING #else - #define X_MIN_PIN 43 -#endif //DELTA - #define X_MAX_PIN 42 //2 //Max endstops default to disabled "-1", set to commented value to enable. + #define TEMP_0_PIN 0 // ANALOG NUMBERING +#endif - #define Y_STEP_PIN 65 // A11 - #define Y_DIR_PIN 66 // A12 - #define Y_ENABLE_PIN 64//A10 -#ifdef DELTA - #define Y_MIN_PIN -1 + +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 5 // ANALOG NUMBERING #else - #define Y_MIN_PIN 38 -#endif //DELTA - #define Y_MAX_PIN 41 //15 + #define TEMP_1_PIN 2 // ANALOG NUMBERING +#endif - #define Z_STEP_PIN 68 // A14 - #define Z_DIR_PIN 69 // A15 - #define Z_ENABLE_PIN 67 // A13 - #define Z_MIN_PIN 40 - #define Z_MAX_PIN 37 +#define TEMP_2_PIN 3 // ANALOG NUMBERING - #define E0_STEP_PIN 23 - #define E0_DIR_PIN 24 - #define E0_ENABLE_PIN 22 +#define HEATER_BED_PIN 28 // BED - #define E1_STEP_PIN 26 - #define E1_DIR_PIN 27 - #define E1_ENABLE_PIN 25 +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 6 // ANALOG NUMBERING +#else + #define TEMP_BED_PIN 1 // ANALOG NUMBERING +#endif - #define SDPOWER -1 - #define SDSS 53 - #define LED_PIN 13 +#ifdef NUM_SERVOS + #define SERVO0_PIN 30 - #define FAN_PIN 39 - #define FAN1_PIN 35 - #define FAN2_PIN 36 - #define FAN_SOFT_PWM - #define CONTROLLERFAN_PIN 36 - #define PS_ON_PIN -1 - #define KILL_PIN -1 + #if NUM_SERVOS > 1 + #define SERVO1_PIN 31 + #if NUM_SERVOS > 2 + #define SERVO2_PIN 32 + #if NUM_SERVOS > 3 + #define SERVO3_PIN 33 + #endif + #endif + #endif +#endif// NUM_SERVOS - #define HEATER_0_PIN 29 // EXTRUDER 1 - #define HEATER_1_PIN 34 // EXTRUDER 2 - #define HEATER_2_PIN -1 - - #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 4 // ANALOG NUMBERING - #else - #define TEMP_0_PIN 0 // ANALOG NUMBERING - #endif - - - #if TEMP_SENSOR_1 == -1 - #define TEMP_1_PIN 5 // ANALOG NUMBERING - #else - #define TEMP_1_PIN 2 // ANALOG NUMBERING - #endif - - #define TEMP_2_PIN 3 // ANALOG NUMBERING - - #define HEATER_BED_PIN 28 // BED - - #if TEMP_SENSOR_BED == -1 - #define TEMP_BED_PIN 6 // ANALOG NUMBERING - #else - #define TEMP_BED_PIN 1 // ANALOG NUMBERING - #endif - - #ifdef NUM_SERVOS - #define SERVO0_PIN 30 - - #if NUM_SERVOS > 1 - #define SERVO1_PIN 31 - #endif - - #if NUM_SERVOS > 2 - #define SERVO2_PIN 32 - #endif - - #if NUM_SERVOS > 3 - #define SERVO3_PIN 33 - #endif - #endif - - #ifdef MINIPANEL - #define BEEPER 46 - // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 47 - #define DOGLCD_CS 45 - #define LCD_PIN_BL 44 // backlight LED on PA3 - - #define KILL_PIN 12 - // GLCD features - //#define LCD_CONTRAST 190 - // Uncomment screen orientation - // #define LCD_SCREEN_ROT_90 - // #define LCD_SCREEN_ROT_180 - // #define LCD_SCREEN_ROT_270 - //The encoder and click button - #define BTN_EN1 48 - #define BTN_EN2 11 - #define BTN_ENC 10 //the click switch - //not connected to a pin - #define SDCARDDETECT 49 - #endif //Minipanel - - - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - - -#define SERVO0_PIN 5 +#ifdef MINIPANEL + #define BEEPER 46 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 47 + #define DOGLCD_CS 45 + #define LCD_PIN_BL 44 // backlight LED on PA3 + + #define KILL_PIN 12 + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + // #define LCD_SCREEN_ROT_90 + // #define LCD_SCREEN_ROT_180 + // #define LCD_SCREEN_ROT_270 + //The encoder and click button + #define BTN_EN1 48 + #define BTN_EN2 11 + #define BTN_ENC 10 //the click switch + //not connected to a pin + #define SDCARDDETECT 49 +#endif //Minipanel