✨ Artillery Ruby (STM32F401RCT6) (#23029)
Keith Bennett
3 years ago
committed by
Scott Lahteine
parent
0b84194127
commit
7e9e2a7435
@ -0,0 +1,182 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "env_validate.h"
|
||||||
|
|
||||||
|
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||||
|
#error "Artillery Ruby supports up to 1 hotends / E-steppers."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define BOARD_INFO_NAME "Artillery Ruby"
|
||||||
|
|
||||||
|
#define FLASH_EEPROM_EMULATION
|
||||||
|
//#define I2C_EEPROM
|
||||||
|
//#define E2END 0xFFF // 4KB
|
||||||
|
|
||||||
|
#define HAL_TIMER_RATE F_CPU
|
||||||
|
|
||||||
|
//
|
||||||
|
// Limit Switches
|
||||||
|
//
|
||||||
|
#if (X_HOME_DIR == 1)
|
||||||
|
#define X_MIN_PIN -1
|
||||||
|
#define X_MAX_PIN PA2
|
||||||
|
#else
|
||||||
|
#define X_MIN_PIN PA2
|
||||||
|
#define X_MAX_PIN -1
|
||||||
|
#endif
|
||||||
|
#if (Y_HOME_DIR == 1)
|
||||||
|
#define Y_MIN_PIN -1
|
||||||
|
#define Y_MAX_PIN PA1
|
||||||
|
#else
|
||||||
|
#define Y_MIN_PIN PA1
|
||||||
|
#define Y_MAX_PIN -1
|
||||||
|
#endif
|
||||||
|
#if (Z_HOME_DIR == 1)
|
||||||
|
#define Z_MIN_PIN PC2
|
||||||
|
#define Z_MAX_PIN PA0
|
||||||
|
#else
|
||||||
|
#define Z_MIN_PIN PA0
|
||||||
|
#define Z_MAX_PIN PC2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Steppers
|
||||||
|
//
|
||||||
|
#define X_STEP_PIN PB14
|
||||||
|
#define X_DIR_PIN PB13
|
||||||
|
#define X_ENABLE_PIN PB15
|
||||||
|
|
||||||
|
#define Y_STEP_PIN PB10
|
||||||
|
#define Y_DIR_PIN PB2
|
||||||
|
#define Y_ENABLE_PIN PB12
|
||||||
|
|
||||||
|
#define Z_STEP_PIN PB0
|
||||||
|
#define Z_DIR_PIN PC5
|
||||||
|
#define Z_ENABLE_PIN PB1
|
||||||
|
|
||||||
|
#define E0_STEP_PIN PA7
|
||||||
|
#define E0_DIR_PIN PA6
|
||||||
|
#define E0_ENABLE_PIN PC4
|
||||||
|
|
||||||
|
#define E1_STEP_PIN PA4
|
||||||
|
#define E1_DIR_PIN PA3
|
||||||
|
#define E1_ENABLE_PIN PA5
|
||||||
|
|
||||||
|
//
|
||||||
|
// Temperature Sensors
|
||||||
|
//
|
||||||
|
#define TEMP_0_PIN PC0
|
||||||
|
#define TEMP_BED_PIN PC1
|
||||||
|
|
||||||
|
//
|
||||||
|
// Heaters / Fans
|
||||||
|
//
|
||||||
|
#ifndef HEATER_0_PIN
|
||||||
|
#define HEATER_0_PIN PC9 // Heater0
|
||||||
|
#endif
|
||||||
|
#ifndef HEATER_BED_PIN
|
||||||
|
#define HEATER_BED_PIN PA8 // Hotbed
|
||||||
|
#endif
|
||||||
|
#ifndef FAN_PIN
|
||||||
|
#define FAN_PIN PC8 // Fan0
|
||||||
|
#endif
|
||||||
|
#ifndef FAN1_PIN
|
||||||
|
#define FAN1_PIN PC7 // Fan1
|
||||||
|
#endif
|
||||||
|
#ifndef FAN2_PIN
|
||||||
|
#define FAN2_PIN PC6 // Fan2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Servos
|
||||||
|
//
|
||||||
|
#define SERVO0_PIN PC3
|
||||||
|
|
||||||
|
//
|
||||||
|
// SPI
|
||||||
|
//
|
||||||
|
#define SCK_PIN PC10
|
||||||
|
#define MISO_PIN PC11
|
||||||
|
#define MOSI_PIN PC12
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD / Controller
|
||||||
|
//
|
||||||
|
#if HAS_WIRED_LCD
|
||||||
|
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
|
||||||
|
#define LCD_PINS_DC PB8 // Set as output on init
|
||||||
|
#define LCD_PINS_RS PB9 // Pull low for 1s to init
|
||||||
|
// DOGM SPI LCD Support
|
||||||
|
#define DOGLCD_CS PC15
|
||||||
|
#define DOGLCD_MOSI PB6
|
||||||
|
#define DOGLCD_SCK PB5
|
||||||
|
#define DOGLCD_A0 LCD_PINS_DC
|
||||||
|
#elif ENABLED(FYSETC_MINI_12864)
|
||||||
|
#define DOGLCD_CS PB6
|
||||||
|
#define DOGLCD_A0 PC15
|
||||||
|
|
||||||
|
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
|
||||||
|
// results in LCD soft SPI mode 3, SD soft SPI mode 0
|
||||||
|
|
||||||
|
#define LCD_RESET_PIN PB5 // Must be high or open for LCD to operate normally.
|
||||||
|
|
||||||
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||||
|
#ifndef RGB_LED_R_PIN
|
||||||
|
#define RGB_LED_R_PIN PB9
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_G_PIN
|
||||||
|
#define RGB_LED_G_PIN PB8
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_B_PIN
|
||||||
|
#define RGB_LED_B_PIN PB7
|
||||||
|
#endif
|
||||||
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||||
|
#define NEOPIXEL_PIN PB9
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define DEFAULT_LCD_CONTRAST 255
|
||||||
|
#else
|
||||||
|
#define LCD_PINS_RS PC15
|
||||||
|
#define LCD_PINS_ENABLE PB6
|
||||||
|
#define LCD_PINS_D4 PB5
|
||||||
|
#define LCD_PINS_D5 PB9
|
||||||
|
#define LCD_PINS_D6 PB8
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define LCD_PINS_D7 PB7
|
||||||
|
|
||||||
|
//
|
||||||
|
// Beeper, SD Card, Encoder
|
||||||
|
//
|
||||||
|
#define BEEPER_PIN PC13
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
#define SDSS PA15
|
||||||
|
#define SD_DETECT_PIN PD2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define BTN_EN1 PB4
|
||||||
|
#define BTN_EN2 PB3
|
||||||
|
#define BTN_ENC PC14
|
||||||
|
#endif
|
||||||
@ -0,0 +1,60 @@
|
|||||||
|
{
|
||||||
|
"build": {
|
||||||
|
"core": "stm32",
|
||||||
|
"cpu": "cortex-m4",
|
||||||
|
"extra_flags": "-DSTM32F401xx",
|
||||||
|
"f_cpu": "84000000L",
|
||||||
|
"hwids": [
|
||||||
|
[
|
||||||
|
"0x0483",
|
||||||
|
"0xDF11"
|
||||||
|
]
|
||||||
|
],
|
||||||
|
"mcu": "stm32f401rct6",
|
||||||
|
"variant": "MARLIN_ARTILLERY_RUBY"
|
||||||
|
},
|
||||||
|
"debug": {
|
||||||
|
"jlink_device": "STM32F401RC",
|
||||||
|
"openocd_target": "stm32f4x",
|
||||||
|
"svd_path": "STM32F40x.svd",
|
||||||
|
"tools": {
|
||||||
|
"stlink": {
|
||||||
|
"server": {
|
||||||
|
"arguments": [
|
||||||
|
"-f",
|
||||||
|
"scripts/interface/stlink.cfg",
|
||||||
|
"-c",
|
||||||
|
"transport select hla_swd",
|
||||||
|
"-f",
|
||||||
|
"scripts/target/stm32f4x.cfg",
|
||||||
|
"-c",
|
||||||
|
"reset_config none"
|
||||||
|
],
|
||||||
|
"executable": "bin/openocd",
|
||||||
|
"package": "tool-openocd"
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
},
|
||||||
|
"frameworks": [
|
||||||
|
"arduino",
|
||||||
|
"stm32cube"
|
||||||
|
],
|
||||||
|
"name": "STM32F401RC (64k RAM. 256k Flash)",
|
||||||
|
"upload": {
|
||||||
|
"disable_flushing": false,
|
||||||
|
"maximum_ram_size": 65536,
|
||||||
|
"maximum_size": 262144,
|
||||||
|
"protocol": "stlink",
|
||||||
|
"protocols": [
|
||||||
|
"stlink",
|
||||||
|
"dfu",
|
||||||
|
"jlink"
|
||||||
|
],
|
||||||
|
"require_upload_port": true,
|
||||||
|
"use_1200bps_touch": false,
|
||||||
|
"wait_for_upload_port": false
|
||||||
|
},
|
||||||
|
"url": "https://www.st.com/en/evaluation-tools/steval-3dp001v1.html",
|
||||||
|
"vendor": "Generic"
|
||||||
|
}
|
||||||
@ -0,0 +1,247 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2019, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
*******************************************************************************
|
||||||
|
* Automatically generated from STM32F401R(B-C)Tx.xml
|
||||||
|
*/
|
||||||
|
#include "Arduino.h"
|
||||||
|
#include "PeripheralPins.h"
|
||||||
|
|
||||||
|
/* =====
|
||||||
|
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||||
|
* If you change them, you will have to know what you do
|
||||||
|
* =====
|
||||||
|
*/
|
||||||
|
|
||||||
|
//*** ADC ***
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_ADC[] = {
|
||||||
|
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||||
|
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||||
|
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||||
|
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||||
|
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||||
|
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||||
|
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||||
|
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||||
|
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||||
|
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||||
|
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||||
|
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||||
|
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||||
|
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||||
|
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||||
|
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No DAC ***
|
||||||
|
|
||||||
|
//*** I2C ***
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||||
|
{PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
|
||||||
|
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
||||||
|
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||||
|
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||||
|
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** PWM ***
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_PWM[] = {
|
||||||
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||||
|
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||||
|
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||||
|
{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||||
|
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||||
|
{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||||
|
{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||||
|
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||||
|
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||||
|
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||||
|
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||||
|
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||||
|
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||||
|
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||||
|
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||||
|
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||||
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||||
|
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||||
|
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||||
|
{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||||
|
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||||
|
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||||
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||||
|
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||||
|
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||||
|
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||||
|
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||||
|
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SERIAL ***
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_TX[] = {
|
||||||
|
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||||
|
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RX[] = {
|
||||||
|
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||||
|
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||||
|
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||||
|
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SPI ***
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||||
|
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||||
|
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No CAN ***
|
||||||
|
|
||||||
|
//*** No ETHERNET ***
|
||||||
|
|
||||||
|
//*** No QUADSPI ***
|
||||||
|
|
||||||
|
//*** USB ***
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_USB_OTG_FS[] = {
|
||||||
|
{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||||
|
{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||||
|
{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||||
|
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||||
|
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No USB_OTG_HS ***
|
||||||
|
|
||||||
|
//*** SD ***
|
||||||
|
|
||||||
|
#ifdef HAL_SD_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SD[] = {
|
||||||
|
{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
||||||
|
{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
||||||
|
{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
||||||
|
{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
||||||
|
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
||||||
|
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
||||||
|
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
||||||
|
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
||||||
|
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
||||||
|
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
@ -0,0 +1,33 @@
|
|||||||
|
/* SYS_WKUP */
|
||||||
|
#ifdef PWR_WAKEUP_PIN1
|
||||||
|
SYS_WKUP1 = PA_0,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN2
|
||||||
|
SYS_WKUP2 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN3
|
||||||
|
SYS_WKUP3 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN4
|
||||||
|
SYS_WKUP4 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN5
|
||||||
|
SYS_WKUP5 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN6
|
||||||
|
SYS_WKUP6 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN7
|
||||||
|
SYS_WKUP7 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN8
|
||||||
|
SYS_WKUP8 = NC,
|
||||||
|
#endif
|
||||||
|
/* USB */
|
||||||
|
#ifdef USBCON
|
||||||
|
USB_OTG_FS_SOF = PA_8,
|
||||||
|
USB_OTG_FS_VBUS = PA_9,
|
||||||
|
USB_OTG_FS_ID = PA_10,
|
||||||
|
USB_OTG_FS_DM = PA_11,
|
||||||
|
USB_OTG_FS_DP = PA_12,
|
||||||
|
#endif
|
||||||
@ -0,0 +1,496 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32f4xx_hal_conf.h
|
||||||
|
* @brief HAL configuration file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __STM32F4xx_HAL_CONF_CUSTOM
|
||||||
|
#define __STM32F4xx_HAL_CONF_CUSTOM
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* ########################## Module Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief This is the list of modules to be used in the HAL driver
|
||||||
|
*/
|
||||||
|
#define HAL_MODULE_ENABLED
|
||||||
|
#define HAL_ADC_MODULE_ENABLED
|
||||||
|
/* #define HAL_CAN_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CRC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CEC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||||
|
//#define HAL_DAC_MODULE_ENABLED
|
||||||
|
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||||
|
#define HAL_DMA_MODULE_ENABLED
|
||||||
|
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||||
|
/* #define HAL_ETH_MODULE_ENABLED */
|
||||||
|
#define HAL_FLASH_MODULE_ENABLED
|
||||||
|
/* #define HAL_NAND_MODULE_ENABLED */
|
||||||
|
/* #define HAL_NOR_MODULE_ENABLED */
|
||||||
|
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_HASH_MODULE_ENABLED */
|
||||||
|
#define HAL_GPIO_MODULE_ENABLED
|
||||||
|
#define HAL_EXTI_MODULE_ENABLED
|
||||||
|
#define HAL_I2C_MODULE_ENABLED
|
||||||
|
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||||
|
/* #define HAL_I2S_MODULE_ENABLED */
|
||||||
|
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||||
|
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_DSI_MODULE_ENABLED */
|
||||||
|
#define HAL_PWR_MODULE_ENABLED
|
||||||
|
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||||
|
#define HAL_RCC_MODULE_ENABLED
|
||||||
|
/* #define HAL_RNG_MODULE_ENABLED */
|
||||||
|
/* #define HAL_RTC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SAI_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SD_MODULE_ENABLED */
|
||||||
|
#define HAL_SPI_MODULE_ENABLED
|
||||||
|
#define HAL_TIM_MODULE_ENABLED
|
||||||
|
/* #define HAL_UART_MODULE_ENABLED */
|
||||||
|
/* #define HAL_USART_MODULE_ENABLED */
|
||||||
|
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||||
|
#define HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#ifndef HAL_PCD_MODULE_ENABLED
|
||||||
|
#define HAL_PCD_MODULE_ENABLED //Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
|
||||||
|
#endif
|
||||||
|
/* #define HAL_HCD_MODULE_ENABLED */
|
||||||
|
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||||
|
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_MMC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||||
|
/**
|
||||||
|
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSE is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#ifndef HSE_VALUE
|
||||||
|
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||||
|
#endif /* HSE_VALUE */
|
||||||
|
|
||||||
|
#ifndef HSE_STARTUP_TIMEOUT
|
||||||
|
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||||
|
#endif /* HSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal High Speed oscillator (HSI) value.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSI is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#ifndef HSI_VALUE
|
||||||
|
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
|
||||||
|
#endif /* HSI_VALUE */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal Low Speed oscillator (LSI) value.
|
||||||
|
*/
|
||||||
|
#ifndef LSI_VALUE
|
||||||
|
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
|
||||||
|
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||||
|
The real value may vary depending on the variations
|
||||||
|
in voltage and temperature. */
|
||||||
|
/**
|
||||||
|
* @brief External Low Speed oscillator (LSE) value.
|
||||||
|
*/
|
||||||
|
#ifndef LSE_VALUE
|
||||||
|
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||||
|
#endif /* LSE_VALUE */
|
||||||
|
|
||||||
|
#ifndef LSE_STARTUP_TIMEOUT
|
||||||
|
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||||
|
#endif /* LSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief External clock source for I2S peripheral
|
||||||
|
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||||
|
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||||
|
*/
|
||||||
|
#ifndef EXTERNAL_CLOCK_VALUE
|
||||||
|
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
|
||||||
|
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||||
|
|
||||||
|
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||||
|
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||||
|
|
||||||
|
/* ########################### System Configuration ######################### */
|
||||||
|
/**
|
||||||
|
* @brief This is the HAL system configuration section
|
||||||
|
*/
|
||||||
|
#if !defined (VDD_VALUE)
|
||||||
|
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||||
|
#endif
|
||||||
|
#if !defined (TICK_INT_PRIORITY)
|
||||||
|
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */
|
||||||
|
#endif
|
||||||
|
#if !defined (USE_RTOS)
|
||||||
|
#define USE_RTOS 0U
|
||||||
|
#endif
|
||||||
|
#if !defined (PREFETCH_ENABLE)
|
||||||
|
#define PREFETCH_ENABLE 1U
|
||||||
|
#endif
|
||||||
|
#if !defined (INSTRUCTION_CACHE_ENABLE)
|
||||||
|
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||||
|
#endif
|
||||||
|
#if !defined (DATA_CACHE_ENABLE)
|
||||||
|
#define DATA_CACHE_ENABLE 1U
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||||
|
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||||
|
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||||
|
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||||
|
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||||
|
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||||
|
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||||
|
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||||
|
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||||
|
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||||
|
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||||
|
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||||
|
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||||
|
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||||
|
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||||
|
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||||
|
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||||
|
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||||
|
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||||
|
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||||
|
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||||
|
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||||
|
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||||
|
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||||
|
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||||
|
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||||
|
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||||
|
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||||
|
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||||
|
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||||
|
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||||
|
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||||
|
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||||
|
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||||
|
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||||
|
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||||
|
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||||
|
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||||
|
|
||||||
|
/* ########################## Assert Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||||
|
* HAL drivers code
|
||||||
|
*/
|
||||||
|
/* #define USE_FULL_ASSERT 1U */
|
||||||
|
|
||||||
|
/* ################## Ethernet peripheral configuration ##################### */
|
||||||
|
|
||||||
|
/* Section 1 : Ethernet peripheral configuration */
|
||||||
|
|
||||||
|
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||||
|
#define MAC_ADDR0 2U
|
||||||
|
#define MAC_ADDR1 0U
|
||||||
|
#define MAC_ADDR2 0U
|
||||||
|
#define MAC_ADDR3 0U
|
||||||
|
#define MAC_ADDR4 0U
|
||||||
|
#define MAC_ADDR5 0U
|
||||||
|
|
||||||
|
/* Definition of the Ethernet driver buffers size and count */
|
||||||
|
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||||
|
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||||
|
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||||
|
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||||
|
|
||||||
|
/* Section 2: PHY configuration section */
|
||||||
|
|
||||||
|
/* DP83848_PHY_ADDRESS Address*/
|
||||||
|
#define DP83848_PHY_ADDRESS 0x01U
|
||||||
|
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||||
|
#define PHY_RESET_DELAY 0x000000FFU
|
||||||
|
/* PHY Configuration delay */
|
||||||
|
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||||
|
|
||||||
|
#define PHY_READ_TO 0x0000FFFFU
|
||||||
|
#define PHY_WRITE_TO 0x0000FFFFU
|
||||||
|
|
||||||
|
/* Section 3: Common PHY Registers */
|
||||||
|
|
||||||
|
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||||
|
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||||
|
|
||||||
|
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||||
|
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||||
|
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||||
|
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||||
|
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||||
|
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||||
|
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||||
|
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||||
|
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||||
|
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||||
|
|
||||||
|
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||||
|
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||||
|
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||||
|
|
||||||
|
/* Section 4: Extended PHY Registers */
|
||||||
|
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||||
|
|
||||||
|
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||||
|
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||||
|
|
||||||
|
/* ################## SPI peripheral configuration ########################## */
|
||||||
|
|
||||||
|
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||||
|
* Activated: CRC code is present inside driver
|
||||||
|
* Deactivated: CRC code cleaned from driver
|
||||||
|
*/
|
||||||
|
#ifndef USE_SPI_CRC
|
||||||
|
#define USE_SPI_CRC 0U
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* @brief Include module's header file
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef HAL_RCC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_rcc.h"
|
||||||
|
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_gpio.h"
|
||||||
|
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_exti.h"
|
||||||
|
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DMA_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dma.h"
|
||||||
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_cortex.h"
|
||||||
|
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_adc.h"
|
||||||
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_can.h"
|
||||||
|
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_can_legacy.h"
|
||||||
|
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_crc.h"
|
||||||
|
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_cryp.h"
|
||||||
|
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dma2d.h"
|
||||||
|
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dac.h"
|
||||||
|
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dcmi.h"
|
||||||
|
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ETH_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_eth.h"
|
||||||
|
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_flash.h"
|
||||||
|
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sram.h"
|
||||||
|
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NOR_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_nor.h"
|
||||||
|
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NAND_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_nand.h"
|
||||||
|
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_pccard.h"
|
||||||
|
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sdram.h"
|
||||||
|
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_HASH_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_hash.h"
|
||||||
|
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_i2c.h"
|
||||||
|
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_smbus.h"
|
||||||
|
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2S_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_i2s.h"
|
||||||
|
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_iwdg.h"
|
||||||
|
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_ltdc.h"
|
||||||
|
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_pwr.h"
|
||||||
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RNG_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_rng.h"
|
||||||
|
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RTC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_rtc.h"
|
||||||
|
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SAI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sai.h"
|
||||||
|
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sd.h"
|
||||||
|
#endif /* HAL_SD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_spi.h"
|
||||||
|
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_tim.h"
|
||||||
|
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_uart.h"
|
||||||
|
#endif /* HAL_UART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_USART_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_usart.h"
|
||||||
|
#endif /* HAL_USART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_irda.h"
|
||||||
|
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_smartcard.h"
|
||||||
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_wwdg.h"
|
||||||
|
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_pcd.h"
|
||||||
|
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_HCD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_hcd.h"
|
||||||
|
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DSI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dsi.h"
|
||||||
|
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_qspi.h"
|
||||||
|
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CEC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_cec.h"
|
||||||
|
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_fmpi2c.h"
|
||||||
|
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_spdifrx.h"
|
||||||
|
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dfsdm.h"
|
||||||
|
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_lptim.h"
|
||||||
|
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_MMC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_mmc.h"
|
||||||
|
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
#ifdef USE_FULL_ASSERT
|
||||||
|
/**
|
||||||
|
* @brief The assert_param macro is used for function's parameters check.
|
||||||
|
* @param expr If expr is false, it calls assert_failed function
|
||||||
|
* which reports the name of the source file and the source
|
||||||
|
* line number of the call that failed.
|
||||||
|
* If expr is true, it returns no value.
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||||
|
/* Exported functions ------------------------------------------------------- */
|
||||||
|
void assert_failed(uint8_t *file, uint32_t line);
|
||||||
|
#else
|
||||||
|
#define assert_param(expr) ((void)0U)
|
||||||
|
#endif /* USE_FULL_ASSERT */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */
|
||||||
|
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -0,0 +1,196 @@
|
|||||||
|
/*
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
** File : ldscript.ld
|
||||||
|
**
|
||||||
|
** Abstract : Linker script for STM32F401RETx Device with
|
||||||
|
** 512KByte FLASH, 96KByte RAM
|
||||||
|
**
|
||||||
|
** Set heap size, stack size and stack location according
|
||||||
|
** to application requirements.
|
||||||
|
**
|
||||||
|
** Set memory bank area and size if external memory is used.
|
||||||
|
**
|
||||||
|
** Target : STMicroelectronics STM32
|
||||||
|
**
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed as is, without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
** @attention
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20010000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
BOOT (rx) : ORIGIN = 0x08000000, LENGTH = 16K
|
||||||
|
EMULATED_EEPROM (rx) : ORIGIN = 0x08004000, LENGTH = 16K
|
||||||
|
FLASH (rx) : ORIGIN = 0x08008000, LENGTH = 256K - 16K * 2
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >BOOT
|
||||||
|
|
||||||
|
.boot :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text.Reset_Handler)
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >BOOT
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
@ -0,0 +1,172 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Pin number
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PA_0, //D0
|
||||||
|
PA_1, //D1
|
||||||
|
PA_2, //D2
|
||||||
|
PA_3, //D3
|
||||||
|
PA_4, //D4
|
||||||
|
PA_5, //D5
|
||||||
|
PA_6, //D6
|
||||||
|
PA_7, //D7
|
||||||
|
PA_8, //D8
|
||||||
|
PA_9, //D9
|
||||||
|
PA_10, //D10
|
||||||
|
PA_11, //D11
|
||||||
|
PA_12, //D12
|
||||||
|
PA_13, //D13
|
||||||
|
PA_14, //D14
|
||||||
|
PA_15, //D15
|
||||||
|
PB_0, //D16
|
||||||
|
PB_1, //D17
|
||||||
|
PB_2, //D18
|
||||||
|
PB_3, //D19
|
||||||
|
PB_4, //D20
|
||||||
|
PB_5, //D21
|
||||||
|
PB_6, //D22
|
||||||
|
PB_7, //D23
|
||||||
|
PB_8, //D24
|
||||||
|
PB_9, //D25
|
||||||
|
PB_10, //D26
|
||||||
|
PB_12, //D27
|
||||||
|
PB_13, //D28
|
||||||
|
PB_14, //D29
|
||||||
|
PB_15, //D30
|
||||||
|
PC_0, //D31
|
||||||
|
PC_1, //D32
|
||||||
|
PC_2, //D33
|
||||||
|
PC_3, //D34
|
||||||
|
PC_4, //D35
|
||||||
|
PC_5, //D36
|
||||||
|
PC_6, //D37
|
||||||
|
PC_7, //D38
|
||||||
|
PC_8, //D39
|
||||||
|
PC_9, //D40
|
||||||
|
PC_10, //D41
|
||||||
|
PC_11, //D42
|
||||||
|
PC_12, //D43
|
||||||
|
PC_13, //D44
|
||||||
|
PC_14, //D45
|
||||||
|
PC_15, //D46
|
||||||
|
PD_2, //D47
|
||||||
|
PH_0, //D48
|
||||||
|
PH_1, //D49
|
||||||
|
|
||||||
|
//Duplicated ADC Pins
|
||||||
|
PA_0, //D50/A0
|
||||||
|
PA_1, //D51/A1
|
||||||
|
PA_2, //D52/A2
|
||||||
|
PA_3, //D53/A3
|
||||||
|
PA_4, //D54/A4
|
||||||
|
PA_5, //D55/A5
|
||||||
|
PA_6, //D56/A6
|
||||||
|
PA_7, //D57/A7
|
||||||
|
PB_0, //D58/A8
|
||||||
|
PB_1, //D59/A9
|
||||||
|
PC_0, //D60/A10
|
||||||
|
PC_1, //D61/A11
|
||||||
|
PC_2, //D62/A12
|
||||||
|
PC_3, //D63/A13
|
||||||
|
PC_4, //D64/A14
|
||||||
|
PC_5 //D65/A15
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* The system Clock is configured as follow :
|
||||||
|
* System Clock source = PLL (HSE)
|
||||||
|
* SYSCLK(Hz) = 84000000
|
||||||
|
* HCLK(Hz) = 84000000
|
||||||
|
* AHB Prescaler = 1
|
||||||
|
* APB1 Prescaler = 2
|
||||||
|
* APB2 Prescaler = 1
|
||||||
|
* HSE Frequency(Hz) = 8000000
|
||||||
|
* PLL_M = 8
|
||||||
|
* PLL_N = 336
|
||||||
|
* PLL_P = 4
|
||||||
|
* PLL_Q = 7
|
||||||
|
* VDD(V) = 3.3
|
||||||
|
* Main regulator output voltage = Scale2 mode
|
||||||
|
* Flash Latency(WS) = 2
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||||
|
|
||||||
|
/* Enable Power Control clock */
|
||||||
|
__HAL_RCC_PWR_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||||
|
clocked below the maximum system frequency, to update the voltage scaling value
|
||||||
|
regarding system frequency refer to product datasheet. */
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||||
|
|
||||||
|
/* Enable HSI Oscillator and activate PLL with HSI as source */
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
|
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||||
|
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||||
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
|
||||||
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||||
|
/* Initialization Error */
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||||
|
clocks dividers */
|
||||||
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||||
|
/* Initialization Error */
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void flashFirmware(const int16_t) {
|
||||||
|
*((unsigned long *)0x2000FFF0) = 0xDEADBEEF; // End of RAM
|
||||||
|
NVIC_SystemReset();
|
||||||
|
}
|
||||||
@ -0,0 +1,148 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _VARIANT_ARDUINO_STM32_
|
||||||
|
#define _VARIANT_ARDUINO_STM32_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif // __cplusplus
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Pins
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
|
||||||
|
#define PA0 0 //D0
|
||||||
|
#define PA1 1 //D1
|
||||||
|
#define PA2 2 //D2
|
||||||
|
#define PA3 3 //D3
|
||||||
|
#define PA4 4 //D4
|
||||||
|
#define PA5 5 //D5
|
||||||
|
#define PA6 6 //D6
|
||||||
|
#define PA7 7 //D7
|
||||||
|
#define PA8 8 //D8
|
||||||
|
#define PA9 9 //D9
|
||||||
|
#define PA10 10 //D10
|
||||||
|
#define PA11 11 //D11
|
||||||
|
#define PA12 12 //D12
|
||||||
|
#define PA13 13 //D13
|
||||||
|
#define PA14 14 //D14
|
||||||
|
#define PA15 15 //D15
|
||||||
|
#define PB0 16 //D16
|
||||||
|
#define PB1 17 //D17
|
||||||
|
#define PB2 18 //D18
|
||||||
|
#define PB3 19 //D19
|
||||||
|
#define PB4 20 //D20
|
||||||
|
#define PB5 21 //D21
|
||||||
|
#define PB6 22 //D22
|
||||||
|
#define PB7 23 //D23
|
||||||
|
#define PB8 24 //D24
|
||||||
|
#define PB9 25 //D25
|
||||||
|
#define PB10 26 //D26
|
||||||
|
#define PB12 27 //D27
|
||||||
|
#define PB13 28 //D28
|
||||||
|
#define PB14 29 //D29
|
||||||
|
#define PB15 30 //D30
|
||||||
|
#define PC0 31 //D31
|
||||||
|
#define PC1 32 //D32
|
||||||
|
#define PC2 33 //D33
|
||||||
|
#define PC3 34 //D34
|
||||||
|
#define PC4 35 //D35
|
||||||
|
#define PC5 36 //D36
|
||||||
|
#define PC6 37 //D37
|
||||||
|
#define PC7 38 //D38
|
||||||
|
#define PC8 39 //D39
|
||||||
|
#define PC9 40 //D40
|
||||||
|
#define PC10 41 //D41
|
||||||
|
#define PC11 42 //D42
|
||||||
|
#define PC12 43 //D43
|
||||||
|
#define PC13 44 //D44
|
||||||
|
#define PC14 45 //D45
|
||||||
|
#define PC15 46 //D46
|
||||||
|
#define PD2 47 //D47
|
||||||
|
#define PH0 48 //D48
|
||||||
|
#define PH1 49 //D49
|
||||||
|
|
||||||
|
// This must be a literal
|
||||||
|
#define NUM_DIGITAL_PINS 66
|
||||||
|
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||||
|
#define NUM_ANALOG_INPUTS 16
|
||||||
|
#define NUM_ANALOG_FIRST 50
|
||||||
|
|
||||||
|
/*
|
||||||
|
// PWM resolution
|
||||||
|
#define PWM_RESOLUTION 8
|
||||||
|
#define PWM_FREQUENCY 20000 // >= 20 Khz => inaudible noise for fans
|
||||||
|
#define PWM_MAX_DUTY_CYCLE 255
|
||||||
|
*/
|
||||||
|
|
||||||
|
// SPI Definitions
|
||||||
|
#define PIN_SPI_MOSI PC12
|
||||||
|
#define PIN_SPI_MISO PC11
|
||||||
|
#define PIN_SPI_SCK PC10
|
||||||
|
#define PIN_SPI_SS PA15
|
||||||
|
|
||||||
|
// Timer Definitions
|
||||||
|
// TIM1 - Hardware PWM (HB)
|
||||||
|
// TIM2 - TIMER_SERVO
|
||||||
|
// TIM3 - Hardware PWM (FAN0/1/2, HE0)
|
||||||
|
// TIM4 - Hardware PWM (LED_R/G/B)
|
||||||
|
// TIM5 - TIMER_TONE
|
||||||
|
// TIM9 - STEP_TIMER
|
||||||
|
// TIM10 - TEMP_TIMER
|
||||||
|
// TIM11 -
|
||||||
|
#define TIMER_SERVO TIM2
|
||||||
|
#define TIMER_TONE TIM5
|
||||||
|
|
||||||
|
// UART Definitions
|
||||||
|
#define SERIAL_UART_INSTANCE 1
|
||||||
|
|
||||||
|
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||||
|
// Mandatory for Firmata
|
||||||
|
#define PIN_SERIAL_RX PA10
|
||||||
|
#define PIN_SERIAL_TX PA9
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
} // extern "C"
|
||||||
|
#endif
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Arduino objects - C++ only
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||||
|
// pins are NOT connected to anything by default.
|
||||||
|
#define SERIAL_PORT_MONITOR Serial
|
||||||
|
#define SERIAL_PORT_HARDWARE Serial
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* _VARIANT_ARDUINO_STM32_ */
|
||||||
Loading…
Reference in New Issue