From 7e9e2a74358c6033577fc31f3a16af57214e4f3a Mon Sep 17 00:00:00 2001
From: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Mon, 1 Nov 2021 20:23:24 -0700
Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20Artillery=20Ruby=20(STM32F401RCT6)?=
=?UTF-8?q?=20(#23029)?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
---
Marlin/src/HAL/STM32/HAL.cpp | 2 +-
Marlin/src/core/boards.h | 1 +
Marlin/src/pins/pins.h | 2 +
Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h | 182 +++++++
.../boards/marlin_Artillery_Ruby.json | 60 +++
.../scripts/STM32F103RC_MEEB_3DP.py | 18 -
.../PlatformIO/scripts/STM32F103RC_fysetc.py | 1 -
.../MARLIN_ARTILLERY_RUBY/PeripheralPins.c | 247 +++++++++
.../MARLIN_ARTILLERY_RUBY/PinNamesVar.h | 33 ++
.../MARLIN_ARTILLERY_RUBY/hal_conf_custom.h | 496 ++++++++++++++++++
.../MARLIN_ARTILLERY_RUBY/ldscript.ld | 196 +++++++
.../MARLIN_ARTILLERY_RUBY/variant.cpp | 172 ++++++
.../variants/MARLIN_ARTILLERY_RUBY/variant.h | 148 ++++++
ini/stm32f4.ini | 14 +
14 files changed, 1552 insertions(+), 20 deletions(-)
create mode 100644 Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h
create mode 100644 buildroot/share/PlatformIO/boards/marlin_Artillery_Ruby.json
create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PeripheralPins.c
create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PinNamesVar.h
create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/hal_conf_custom.h
create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/ldscript.ld
create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.cpp
create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.h
diff --git a/Marlin/src/HAL/STM32/HAL.cpp b/Marlin/src/HAL/STM32/HAL.cpp
index a04a24c112..0920a72ec1 100644
--- a/Marlin/src/HAL/STM32/HAL.cpp
+++ b/Marlin/src/HAL/STM32/HAL.cpp
@@ -154,7 +154,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) { HAL_adc_result = analogRe
uint16_t HAL_adc_get_result() { return HAL_adc_result; }
// Reset the system to initiate a firmware flash
-void flashFirmware(const int16_t) { HAL_reboot(); }
+WEAK void flashFirmware(const int16_t) { HAL_reboot(); }
// Maple Compatibility
volatile uint32_t systick_uptime_millis = 0;
diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index 2341e6577b..789512c4ef 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -406,6 +406,7 @@
#define BOARD_INDEX_REV03 4234 // Index PnP Controller REV03 (STM32F407VET6/VGT6)
#define BOARD_MKS_ROBIN_NANO_V1_3_F4 4235 // MKS Robin Nano V1.3 and MKS Robin Nano-S V1.3 (STM32F407VET6)
#define BOARD_MKS_EAGLE 4236 // MKS Eagle (STM32F407VET6)
+#define BOARD_ARTILLERY_RUBY 4237 // Artillery Ruby (STM32F401RCT6)
//
// ARM Cortex M7
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 0d944b8463..9d5a943522 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -667,6 +667,8 @@
#include "stm32f4/pins_MKS_ROBIN_NANO_V1_3_F4.h" // STM32F4 env:mks_robin_nano_v1_3_f4
#elif MB(MKS_EAGLE)
#include "stm32f4/pins_MKS_EAGLE.h" // STM32F4 env:mks_eagle
+#elif MB(ARTILLERY_RUBY)
+ #include "stm32f4/pins_ARTILLERY_RUBY.h" // STM32F4 env:Artillery_Ruby
//
// ARM Cortex M7
diff --git a/Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h b/Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h
new file mode 100644
index 0000000000..4cf9768fbe
--- /dev/null
+++ b/Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h
@@ -0,0 +1,182 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#include "env_validate.h"
+
+#if HOTENDS > 1 || E_STEPPERS > 1
+ #error "Artillery Ruby supports up to 1 hotends / E-steppers."
+#endif
+
+#define BOARD_INFO_NAME "Artillery Ruby"
+
+#define FLASH_EEPROM_EMULATION
+//#define I2C_EEPROM
+//#define E2END 0xFFF // 4KB
+
+#define HAL_TIMER_RATE F_CPU
+
+//
+// Limit Switches
+//
+#if (X_HOME_DIR == 1)
+ #define X_MIN_PIN -1
+ #define X_MAX_PIN PA2
+#else
+ #define X_MIN_PIN PA2
+ #define X_MAX_PIN -1
+#endif
+#if (Y_HOME_DIR == 1)
+ #define Y_MIN_PIN -1
+ #define Y_MAX_PIN PA1
+#else
+ #define Y_MIN_PIN PA1
+ #define Y_MAX_PIN -1
+#endif
+#if (Z_HOME_DIR == 1)
+ #define Z_MIN_PIN PC2
+ #define Z_MAX_PIN PA0
+#else
+ #define Z_MIN_PIN PA0
+ #define Z_MAX_PIN PC2
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN PB14
+#define X_DIR_PIN PB13
+#define X_ENABLE_PIN PB15
+
+#define Y_STEP_PIN PB10
+#define Y_DIR_PIN PB2
+#define Y_ENABLE_PIN PB12
+
+#define Z_STEP_PIN PB0
+#define Z_DIR_PIN PC5
+#define Z_ENABLE_PIN PB1
+
+#define E0_STEP_PIN PA7
+#define E0_DIR_PIN PA6
+#define E0_ENABLE_PIN PC4
+
+#define E1_STEP_PIN PA4
+#define E1_DIR_PIN PA3
+#define E1_ENABLE_PIN PA5
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN PC0
+#define TEMP_BED_PIN PC1
+
+//
+// Heaters / Fans
+//
+#ifndef HEATER_0_PIN
+ #define HEATER_0_PIN PC9 // Heater0
+#endif
+#ifndef HEATER_BED_PIN
+ #define HEATER_BED_PIN PA8 // Hotbed
+#endif
+#ifndef FAN_PIN
+ #define FAN_PIN PC8 // Fan0
+#endif
+#ifndef FAN1_PIN
+ #define FAN1_PIN PC7 // Fan1
+#endif
+#ifndef FAN2_PIN
+ #define FAN2_PIN PC6 // Fan2
+#endif
+
+//
+// Servos
+//
+#define SERVO0_PIN PC3
+
+//
+// SPI
+//
+#define SCK_PIN PC10
+#define MISO_PIN PC11
+#define MOSI_PIN PC12
+
+//
+// LCD / Controller
+//
+#if HAS_WIRED_LCD
+ #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
+ #define LCD_PINS_DC PB8 // Set as output on init
+ #define LCD_PINS_RS PB9 // Pull low for 1s to init
+ // DOGM SPI LCD Support
+ #define DOGLCD_CS PC15
+ #define DOGLCD_MOSI PB6
+ #define DOGLCD_SCK PB5
+ #define DOGLCD_A0 LCD_PINS_DC
+ #elif ENABLED(FYSETC_MINI_12864)
+ #define DOGLCD_CS PB6
+ #define DOGLCD_A0 PC15
+
+ //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+ #define LCD_RESET_PIN PB5 // Must be high or open for LCD to operate normally.
+
+ #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN PB9
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN PB8
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN PB7
+ #endif
+ #elif ENABLED(FYSETC_MINI_12864_2_1)
+ #define NEOPIXEL_PIN PB9
+ #endif
+
+ #define DEFAULT_LCD_CONTRAST 255
+ #else
+ #define LCD_PINS_RS PC15
+ #define LCD_PINS_ENABLE PB6
+ #define LCD_PINS_D4 PB5
+ #define LCD_PINS_D5 PB9
+ #define LCD_PINS_D6 PB8
+ #endif
+
+ #define LCD_PINS_D7 PB7
+
+ //
+ // Beeper, SD Card, Encoder
+ //
+ #define BEEPER_PIN PC13
+
+ #if ENABLED(SDSUPPORT)
+ #define SDSS PA15
+ #define SD_DETECT_PIN PD2
+ #endif
+
+ #define BTN_EN1 PB4
+ #define BTN_EN2 PB3
+ #define BTN_ENC PC14
+#endif
diff --git a/buildroot/share/PlatformIO/boards/marlin_Artillery_Ruby.json b/buildroot/share/PlatformIO/boards/marlin_Artillery_Ruby.json
new file mode 100644
index 0000000000..e1c8333800
--- /dev/null
+++ b/buildroot/share/PlatformIO/boards/marlin_Artillery_Ruby.json
@@ -0,0 +1,60 @@
+{
+ "build": {
+ "core": "stm32",
+ "cpu": "cortex-m4",
+ "extra_flags": "-DSTM32F401xx",
+ "f_cpu": "84000000L",
+ "hwids": [
+ [
+ "0x0483",
+ "0xDF11"
+ ]
+ ],
+ "mcu": "stm32f401rct6",
+ "variant": "MARLIN_ARTILLERY_RUBY"
+ },
+ "debug": {
+ "jlink_device": "STM32F401RC",
+ "openocd_target": "stm32f4x",
+ "svd_path": "STM32F40x.svd",
+ "tools": {
+ "stlink": {
+ "server": {
+ "arguments": [
+ "-f",
+ "scripts/interface/stlink.cfg",
+ "-c",
+ "transport select hla_swd",
+ "-f",
+ "scripts/target/stm32f4x.cfg",
+ "-c",
+ "reset_config none"
+ ],
+ "executable": "bin/openocd",
+ "package": "tool-openocd"
+ }
+ }
+ }
+ },
+ "frameworks": [
+ "arduino",
+ "stm32cube"
+ ],
+ "name": "STM32F401RC (64k RAM. 256k Flash)",
+ "upload": {
+ "disable_flushing": false,
+ "maximum_ram_size": 65536,
+ "maximum_size": 262144,
+ "protocol": "stlink",
+ "protocols": [
+ "stlink",
+ "dfu",
+ "jlink"
+ ],
+ "require_upload_port": true,
+ "use_1200bps_touch": false,
+ "wait_for_upload_port": false
+ },
+ "url": "https://www.st.com/en/evaluation-tools/steval-3dp001v1.html",
+ "vendor": "Generic"
+}
diff --git a/buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py b/buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
index 03e121c435..e059d44578 100644
--- a/buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
+++ b/buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
@@ -8,37 +8,19 @@ except ImportError:
import os
Import("env", "projenv")
-# access to global build environment
-print(env)
-# access to project build environment (is used source files in "src" folder)
-print(projenv)
config = configparser.ConfigParser()
config.read("platformio.ini")
-#com_port = config.get("env:STM32F103RC_meeb", "upload_port")
-#print('Use the {0:s} to reboot the board to dfu mode.'.format(com_port))
-
#
# Upload actions
#
-
def before_upload(source, target, env):
- print("before_upload")
- # do some actions
- # use com_port
- #
env.Execute("pwd")
def after_upload(source, target, env):
- print("after_upload")
- # do some actions
- #
- #
env.Execute("pwd")
-print("Current build targets", map(str, BUILD_TARGETS))
-
env.AddPreAction("upload", before_upload)
env.AddPostAction("upload", after_upload)
diff --git a/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py b/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
index 668475dc01..07f6548b18 100644
--- a/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
+++ b/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
@@ -1,7 +1,6 @@
#
# buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
#
-import os
from os.path import join
from os.path import expandvars
Import("env")
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PeripheralPins.c
new file mode 100644
index 0000000000..b2783d8c31
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PeripheralPins.c
@@ -0,0 +1,247 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2019, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ * Automatically generated from STM32F401R(B-C)Tx.xml
+ */
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+/* =====
+ * Note: Commented lines are alternative possibilities which are not used per default.
+ * If you change them, you will have to know what you do
+ * =====
+ */
+
+//*** ADC ***
+
+#ifdef HAL_ADC_MODULE_ENABLED
+WEAK const PinMap PinMap_ADC[] = {
+ {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
+ {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
+ {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
+ {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
+ {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
+ {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
+ {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
+ {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
+ {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
+ {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
+ {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
+ {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
+ {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
+ {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
+ {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
+ {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
+ {NC, NP, 0}
+};
+#endif
+
+//*** No DAC ***
+
+//*** I2C ***
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** PWM ***
+
+#ifdef HAL_TIM_MODULE_ENABLED
+WEAK const PinMap PinMap_PWM[] = {
+ {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+ {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+ {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+ {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+ {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
+ {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+ {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+ {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
+ {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+ {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
+ {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+ {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
+ {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+ {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
+ {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+ {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {NC, NP, 0}
+};
+#endif
+
+//*** SERIAL ***
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_TX[] = {
+ {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RX[] = {
+ {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RTS[] = {
+ {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_CTS[] = {
+ {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** SPI ***
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** No CAN ***
+
+//*** No ETHERNET ***
+
+//*** No QUADSPI ***
+
+//*** USB ***
+
+#ifdef HAL_PCD_MODULE_ENABLED
+WEAK const PinMap PinMap_USB_OTG_FS[] = {
+ {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
+ {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
+ {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
+ {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
+ {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
+ {NC, NP, 0}
+};
+#endif
+
+//*** No USB_OTG_HS ***
+
+//*** SD ***
+
+#ifdef HAL_SD_MODULE_ENABLED
+WEAK const PinMap PinMap_SD[] = {
+ {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
+ {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
+ {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
+ {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
+ {PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
+ {PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
+ {PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
+ {PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
+ {PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
+ {PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
+ {NC, NP, 0}
+};
+#endif
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PinNamesVar.h b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PinNamesVar.h
new file mode 100644
index 0000000000..3082f8842a
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/PinNamesVar.h
@@ -0,0 +1,33 @@
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+SYS_WKUP1 = PA_0,
+#endif
+#ifdef PWR_WAKEUP_PIN2
+SYS_WKUP2 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN3
+SYS_WKUP3 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN4
+SYS_WKUP4 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN5
+SYS_WKUP5 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN6
+SYS_WKUP6 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN7
+SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+SYS_WKUP8 = NC,
+#endif
+/* USB */
+#ifdef USBCON
+USB_OTG_FS_SOF = PA_8,
+USB_OTG_FS_VBUS = PA_9,
+USB_OTG_FS_ID = PA_10,
+USB_OTG_FS_DM = PA_11,
+USB_OTG_FS_DP = PA_12,
+#endif
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/hal_conf_custom.h
new file mode 100644
index 0000000000..9fa98807d6
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/hal_conf_custom.h
@@ -0,0 +1,496 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_CUSTOM
+#define __STM32F4xx_HAL_CONF_CUSTOM
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+ /**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+//#define HAL_DAC_MODULE_ENABLED
+/* #define HAL_DCMI_MODULE_ENABLED */
+#define HAL_DMA_MODULE_ENABLED
+/* #define HAL_DMA2D_MODULE_ENABLED */
+/* #define HAL_ETH_MODULE_ENABLED */
+#define HAL_FLASH_MODULE_ENABLED
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_PCCARD_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_SDRAM_MODULE_ENABLED */
+/* #define HAL_HASH_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LTDC_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+#define HAL_PWR_MODULE_ENABLED
+/* #define HAL_QSPI_MODULE_ENABLED */
+#define HAL_RCC_MODULE_ENABLED
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+/* #define HAL_UART_MODULE_ENABLED */
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+#define HAL_CORTEX_MODULE_ENABLED
+#ifndef HAL_PCD_MODULE_ENABLED
+ #define HAL_PCD_MODULE_ENABLED //Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
+#endif
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_FMPI2C_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#ifndef HSE_VALUE
+#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#ifndef HSE_STARTUP_TIMEOUT
+#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#ifndef HSI_VALUE
+#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#ifndef LSI_VALUE
+#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#ifndef LSE_VALUE
+#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#ifndef LSE_STARTUP_TIMEOUT
+#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#ifndef EXTERNAL_CLOCK_VALUE
+#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#if !defined (VDD_VALUE)
+#define VDD_VALUE 3300U /*!< Value of VDD in mv */
+#endif
+#if !defined (TICK_INT_PRIORITY)
+#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */
+#endif
+#if !defined (USE_RTOS)
+#define USE_RTOS 0U
+#endif
+#if !defined (PREFETCH_ENABLE)
+#define PREFETCH_ENABLE 1U
+#endif
+#if !defined (INSTRUCTION_CACHE_ENABLE)
+#define INSTRUCTION_CACHE_ENABLE 1U
+#endif
+#if !defined (DATA_CACHE_ENABLE)
+#define DATA_CACHE_ENABLE 1U
+#endif
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
+#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
+#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
+#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
+#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
+#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
+#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
+#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
+#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
+#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
+#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
+#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
+#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
+#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
+#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
+#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
+#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
+#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
+#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
+#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
+#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
+#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
+#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
+#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
+#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
+#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
+#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
+#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
+#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
+#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
+#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
+#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
+#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS 0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY 0x00000FFFU
+
+#define PHY_READ_TO 0x0000FFFFU
+#define PHY_WRITE_TO 0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
+
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+#ifndef USE_SPI_CRC
+#define USE_SPI_CRC 0U
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+#include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+#include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+#include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+#include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+#include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+#include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+#include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+#include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+#include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+#include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+#include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/ldscript.ld b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/ldscript.ld
new file mode 100644
index 0000000000..57c01c8df8
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/ldscript.ld
@@ -0,0 +1,196 @@
+/*
+*****************************************************************************
+**
+** File : ldscript.ld
+**
+** Abstract : Linker script for STM32F401RETx Device with
+** 512KByte FLASH, 96KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+**
+** Distribution: The file is distributed as is, without any warranty
+** of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** © COPYRIGHT(c) 2014 Ac6
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+** 1. Redistributions of source code must retain the above copyright notice,
+** this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright notice,
+** this list of conditions and the following disclaimer in the documentation
+** and/or other materials provided with the distribution.
+** 3. Neither the name of Ac6 nor the names of its contributors
+** may be used to endorse or promote products derived from this software
+** without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20010000; /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+BOOT (rx) : ORIGIN = 0x08000000, LENGTH = 16K
+EMULATED_EEPROM (rx) : ORIGIN = 0x08004000, LENGTH = 16K
+FLASH (rx) : ORIGIN = 0x08008000, LENGTH = 256K - 16K * 2
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >BOOT
+
+ .boot :
+ {
+ . = ALIGN(4);
+ *(.text.Reset_Handler)
+ . = ALIGN(4);
+ } >BOOT
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.cpp b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.cpp
new file mode 100644
index 0000000000..8f24d68e2f
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.cpp
@@ -0,0 +1,172 @@
+/*
+ Copyright (c) 2011 Arduino. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include "pins_arduino.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Pin number
+const PinName digitalPin[] = {
+ PA_0, //D0
+ PA_1, //D1
+ PA_2, //D2
+ PA_3, //D3
+ PA_4, //D4
+ PA_5, //D5
+ PA_6, //D6
+ PA_7, //D7
+ PA_8, //D8
+ PA_9, //D9
+ PA_10, //D10
+ PA_11, //D11
+ PA_12, //D12
+ PA_13, //D13
+ PA_14, //D14
+ PA_15, //D15
+ PB_0, //D16
+ PB_1, //D17
+ PB_2, //D18
+ PB_3, //D19
+ PB_4, //D20
+ PB_5, //D21
+ PB_6, //D22
+ PB_7, //D23
+ PB_8, //D24
+ PB_9, //D25
+ PB_10, //D26
+ PB_12, //D27
+ PB_13, //D28
+ PB_14, //D29
+ PB_15, //D30
+ PC_0, //D31
+ PC_1, //D32
+ PC_2, //D33
+ PC_3, //D34
+ PC_4, //D35
+ PC_5, //D36
+ PC_6, //D37
+ PC_7, //D38
+ PC_8, //D39
+ PC_9, //D40
+ PC_10, //D41
+ PC_11, //D42
+ PC_12, //D43
+ PC_13, //D44
+ PC_14, //D45
+ PC_15, //D46
+ PD_2, //D47
+ PH_0, //D48
+ PH_1, //D49
+
+ //Duplicated ADC Pins
+ PA_0, //D50/A0
+ PA_1, //D51/A1
+ PA_2, //D52/A2
+ PA_3, //D53/A3
+ PA_4, //D54/A4
+ PA_5, //D55/A5
+ PA_6, //D56/A6
+ PA_7, //D57/A7
+ PB_0, //D58/A8
+ PB_1, //D59/A9
+ PC_0, //D60/A10
+ PC_1, //D61/A11
+ PC_2, //D62/A12
+ PC_3, //D63/A13
+ PC_4, //D64/A14
+ PC_5 //D65/A15
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**
+ * @brief System Clock Configuration
+ * The system Clock is configured as follow :
+ * System Clock source = PLL (HSE)
+ * SYSCLK(Hz) = 84000000
+ * HCLK(Hz) = 84000000
+ * AHB Prescaler = 1
+ * APB1 Prescaler = 2
+ * APB2 Prescaler = 1
+ * HSE Frequency(Hz) = 8000000
+ * PLL_M = 8
+ * PLL_N = 336
+ * PLL_P = 4
+ * PLL_Q = 7
+ * VDD(V) = 3.3
+ * Main regulator output voltage = Scale2 mode
+ * Flash Latency(WS) = 2
+ * @param None
+ * @retval None
+ */
+WEAK void SystemClock_Config(void)
+{
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+
+ /* Enable Power Control clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+ /* Enable HSI Oscillator and activate PLL with HSI as source */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLM = 8;
+ RCC_OscInitStruct.PLL.PLLN = 336;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
+ RCC_OscInitStruct.PLL.PLLQ = 7;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ /* Initialization Error */
+ while (1);
+ }
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
+ clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+ /* Initialization Error */
+ while (1);
+ }
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+void flashFirmware(const int16_t) {
+ *((unsigned long *)0x2000FFF0) = 0xDEADBEEF; // End of RAM
+ NVIC_SystemReset();
+}
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.h
new file mode 100644
index 0000000000..0c66ae89b8
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.h
@@ -0,0 +1,148 @@
+/*
+ Copyright (c) 2011 Arduino. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ * Pins
+ *----------------------------------------------------------------------------*/
+
+
+#define PA0 0 //D0
+#define PA1 1 //D1
+#define PA2 2 //D2
+#define PA3 3 //D3
+#define PA4 4 //D4
+#define PA5 5 //D5
+#define PA6 6 //D6
+#define PA7 7 //D7
+#define PA8 8 //D8
+#define PA9 9 //D9
+#define PA10 10 //D10
+#define PA11 11 //D11
+#define PA12 12 //D12
+#define PA13 13 //D13
+#define PA14 14 //D14
+#define PA15 15 //D15
+#define PB0 16 //D16
+#define PB1 17 //D17
+#define PB2 18 //D18
+#define PB3 19 //D19
+#define PB4 20 //D20
+#define PB5 21 //D21
+#define PB6 22 //D22
+#define PB7 23 //D23
+#define PB8 24 //D24
+#define PB9 25 //D25
+#define PB10 26 //D26
+#define PB12 27 //D27
+#define PB13 28 //D28
+#define PB14 29 //D29
+#define PB15 30 //D30
+#define PC0 31 //D31
+#define PC1 32 //D32
+#define PC2 33 //D33
+#define PC3 34 //D34
+#define PC4 35 //D35
+#define PC5 36 //D36
+#define PC6 37 //D37
+#define PC7 38 //D38
+#define PC8 39 //D39
+#define PC9 40 //D40
+#define PC10 41 //D41
+#define PC11 42 //D42
+#define PC12 43 //D43
+#define PC13 44 //D44
+#define PC14 45 //D45
+#define PC15 46 //D46
+#define PD2 47 //D47
+#define PH0 48 //D48
+#define PH1 49 //D49
+
+// This must be a literal
+#define NUM_DIGITAL_PINS 66
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS 16
+#define NUM_ANALOG_FIRST 50
+
+/*
+// PWM resolution
+#define PWM_RESOLUTION 8
+#define PWM_FREQUENCY 20000 // >= 20 Khz => inaudible noise for fans
+#define PWM_MAX_DUTY_CYCLE 255
+*/
+
+// SPI Definitions
+#define PIN_SPI_MOSI PC12
+#define PIN_SPI_MISO PC11
+#define PIN_SPI_SCK PC10
+#define PIN_SPI_SS PA15
+
+// Timer Definitions
+// TIM1 - Hardware PWM (HB)
+// TIM2 - TIMER_SERVO
+// TIM3 - Hardware PWM (FAN0/1/2, HE0)
+// TIM4 - Hardware PWM (LED_R/G/B)
+// TIM5 - TIMER_TONE
+// TIM9 - STEP_TIMER
+// TIM10 - TEMP_TIMER
+// TIM11 -
+#define TIMER_SERVO TIM2
+#define TIMER_TONE TIM5
+
+// UART Definitions
+#define SERIAL_UART_INSTANCE 1
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX PA10
+#define PIN_SERIAL_TX PA9
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ * Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+// pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR Serial
+#define SERIAL_PORT_HARDWARE Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */
diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini
index 850807585f..0e9b507c8b 100644
--- a/ini/stm32f4.ini
+++ b/ini/stm32f4.ini
@@ -564,3 +564,17 @@ build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
debug_tool = jlink
upload_protocol = jlink
+
+#
+# Artillery Ruby
+#
+[env:Artillery_Ruby]
+platform = ${common_stm32.platform}
+extends = common_stm32
+board = marlin_Artillery_Ruby
+build_flags = ${common_stm32.build_flags}
+ -DSTM32F401xC -DTARGET_STM32F4 -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32
+ -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
+ -DUSB_PRODUCT=\"Artillery_3D_Printer\"
+extra_scripts = ${common_stm32.extra_scripts}
+ pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py