/*
  Copyright (c) 2011 Arduino.  All right reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  See the GNU Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*/

#ifndef _VARIANT_ARDUINO_DUE_X_
#define _VARIANT_ARDUINO_DUE_X_

/*----------------------------------------------------------------------------
 *        Definitions
 *----------------------------------------------------------------------------*/

/** Frequency of the board main oscillator */
#define VARIANT_MAINOSC		12000000

/** Master clock frequency */
#define VARIANT_MCK			84000000

/*----------------------------------------------------------------------------
 *        Headers
 *----------------------------------------------------------------------------*/

#include "Arduino.h"
#ifdef __cplusplus
#include "UARTClass.h"
#include "USARTClass.h"
#endif

#ifdef __cplusplus
extern "C"{
#endif // __cplusplus

/**
 * Libc porting layers
 */
#if defined (  __GNUC__  ) /* GCC CS3 */
#    include <syscalls.h> /** RedHat Newlib minimal stub */
#endif

/*----------------------------------------------------------------------------
 *        Pins
 *----------------------------------------------------------------------------*/

// Number of pins defined in PinDescription array
#define PINS_COUNT           79
#define NUM_DIGITAL_PINS     66
#define NUM_ANALOG_INPUTS    12
#define analogInputToDigitalPin(p)  ((p < 12) ? (p) + 54 : -1)

#define digitalPinToPort(P)        ( g_APinDescription[P].pPort )
#define digitalPinToBitMask(P)     ( g_APinDescription[P].ulPin )
//#define analogInPinToBit(P)        ( )
#define portOutputRegister(port)   ( &(port->PIO_ODSR) )
#define portInputRegister(port)    ( &(port->PIO_PDSR) )
#define digitalPinHasPWM(P)        ( g_APinDescription[P].ulPWMChannel != NOT_ON_PWM || g_APinDescription[P].ulTCChannel != NOT_ON_TIMER )

/*
 * portModeRegister(..) should return a register to set pin mode
 * INPUT or OUTPUT by setting the corresponding bit to 0 or 1.
 * Unfortunately on SAM architecture the PIO_OSR register is
 * read-only and can be set only through the enable/disable registers
 * pair PIO_OER/PIO_ODR.
 */
// #define portModeRegister(port)   ( &(port->PIO_OSR) )

/*
 * digitalPinToTimer(..) is AVR-specific and is not defined for SAM
 * architecture. If you need to check if a pin supports PWM you must
 * use digitalPinHasPWM(..).
 *
 * https://github.com/arduino/Arduino/issues/1833
 */
// #define digitalPinToTimer(P)

// Interrupts
#define digitalPinToInterrupt(p)  ((p) < NUM_DIGITAL_PINS ? (p) : -1)

// LEDs
#define PIN_LED_13           (13U)
#define PIN_LED_RXL          (72U)
#define PIN_LED_TXL          (73U)
#define PIN_LED              PIN_LED_13
#define PIN_LED2             PIN_LED_RXL
#define PIN_LED3             PIN_LED_TXL
#define LED_BUILTIN          13

/*
 * SPI Interfaces
 */
#define SPI_INTERFACES_COUNT 1

#define SPI_INTERFACE        SPI0
#define SPI_INTERFACE_ID     ID_SPI0
#define SPI_CHANNELS_NUM 4
#define PIN_SPI_SS0          (77U)
#define PIN_SPI_SS1          (87U)
#define PIN_SPI_SS2          (86U)
#define PIN_SPI_SS3          (78U)
#define PIN_SPI_MOSI         (75U)
#define PIN_SPI_MISO         (74U)
#define PIN_SPI_SCK          (76U)
#define BOARD_SPI_SS0        (77U) //(10U)
#define BOARD_SPI_SS1        (4U)
#define BOARD_SPI_SS2        (52U)
#define BOARD_SPI_SS3        PIN_SPI_SS3
#define BOARD_SPI_DEFAULT_SS BOARD_SPI_SS3

#define BOARD_PIN_TO_SPI_PIN(x) \
	(x==BOARD_SPI_SS0 ? PIN_SPI_SS0 : \
	(x==BOARD_SPI_SS1 ? PIN_SPI_SS1 : \
	(x==BOARD_SPI_SS2 ? PIN_SPI_SS2 : PIN_SPI_SS3 )))
#define BOARD_PIN_TO_SPI_CHANNEL(x) \
	(x==BOARD_SPI_SS0 ? 0 : \
	(x==BOARD_SPI_SS1 ? 1 : \
	(x==BOARD_SPI_SS2 ? 2 : 3)))

static const uint8_t SS   = BOARD_SPI_SS0;
static const uint8_t SS1  = BOARD_SPI_SS1;
static const uint8_t SS2  = BOARD_SPI_SS2;
static const uint8_t SS3  = BOARD_SPI_SS3;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK  = PIN_SPI_SCK;

/*
 * Wire Interfaces
 */
#define WIRE_INTERFACES_COUNT 2

#define PIN_WIRE_SDA         (20U)
#define PIN_WIRE_SCL         (21U)
#define WIRE_INTERFACE       TWI1
#define WIRE_INTERFACE_ID    ID_TWI1
#define WIRE_ISR_HANDLER     TWI1_Handler
#define WIRE_ISR_ID          TWI1_IRQn

#define PIN_WIRE1_SDA        (70U)
#define PIN_WIRE1_SCL        (71U)
#define WIRE1_INTERFACE      TWI0
#define WIRE1_INTERFACE_ID   ID_TWI0
#define WIRE1_ISR_HANDLER    TWI0_Handler
#define WIRE1_ISR_ID         TWI0_IRQn

static const uint8_t SDA  = PIN_WIRE_SDA;
static const uint8_t SCL  = PIN_WIRE_SCL;
static const uint8_t SDA1 = PIN_WIRE1_SDA;
static const uint8_t SCL1 = PIN_WIRE1_SCL;

/*
 * UART/USART Interfaces
 */
// Serial
#define PINS_UART            (81U)
// Serial1
#define PINS_USART0          (82U)
// Serial2
#define PINS_USART1          (83U)
// Serial3
#define PINS_USART3          (84U)

/*
 * USB Interfaces
 */
#define PINS_USB             (85U)

/*
 * Analog pins
 */
static const uint8_t A0  = 54;
static const uint8_t A1  = 55;
static const uint8_t A2  = 56;
static const uint8_t A3  = 57;
static const uint8_t A4  = 58;
static const uint8_t A5  = 59;
static const uint8_t A6  = 60;
static const uint8_t A7  = 61;
static const uint8_t A8  = 62;
static const uint8_t A9  = 63;
static const uint8_t A10 = 64;
static const uint8_t A11 = 65;
static const uint8_t DAC0 = 66;
static const uint8_t DAC1 = 67;
static const uint8_t CANRX = 68;
static const uint8_t CANTX = 69;
#define ADC_RESOLUTION		12

/*
 * Complementary CAN pins
 */
static const uint8_t CAN1RX = 88;
static const uint8_t CAN1TX = 89;

// CAN0
#define PINS_CAN0            (90U)
// CAN1
#define PINS_CAN1            (91U)


/*
 * DACC
 */
#define DACC_INTERFACE		DACC
#define DACC_INTERFACE_ID	ID_DACC
#define DACC_RESOLUTION		12
#define DACC_ISR_HANDLER    DACC_Handler
#define DACC_ISR_ID         DACC_IRQn

/*
 * PWM
 */
#define PWM_INTERFACE		PWM
#define PWM_INTERFACE_ID	ID_PWM
#define PWM_FREQUENCY		31000
#define PWM_MAX_DUTY_CYCLE	255
#define PWM_MIN_DUTY_CYCLE	0
#define PWM_RESOLUTION		8

/*
 * TC
 */
#define TC_INTERFACE        TC0
#define TC_INTERFACE_ID     ID_TC0
#define TC_FREQUENCY        100000
#define TC_MAX_DUTY_CYCLE   255
#define TC_MIN_DUTY_CYCLE   0
#define TC_RESOLUTION		8

#ifdef __cplusplus
}
#endif

/*----------------------------------------------------------------------------
 *        Arduino objects - C++ only
 *----------------------------------------------------------------------------*/

#ifdef __cplusplus

extern UARTClass Serial;
extern USARTClass Serial1;
extern USARTClass Serial2;
extern USARTClass Serial3;

#endif

// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
//                            pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR         Serial
#define SERIAL_PORT_USBVIRTUAL      SerialUSB
#define SERIAL_PORT_HARDWARE_OPEN   Serial1
#define SERIAL_PORT_HARDWARE_OPEN1  Serial2
#define SERIAL_PORT_HARDWARE_OPEN2  Serial3
#define SERIAL_PORT_HARDWARE        Serial
#define SERIAL_PORT_HARDWARE1       Serial1
#define SERIAL_PORT_HARDWARE2       Serial2
#define SERIAL_PORT_HARDWARE3       Serial3

#endif /* _VARIANT_ARDUINO_DUE_X_ */