# Configuration for Malyan M150 HobbyKing printer Config without automatic bed level sensor, or in other words, "as stock" ## To install: 1. Install [Arduino](https://www.arduino.cc/en/Main/Software) 1. Install U8glib * `Sketch` -> `Include Library` -> `Manage Libraries...` * Search for and install `U8glib` by oliver 1. Install Sanguino * `File` -> `Preferences` * Add `https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json` to `Additional Boards Manager URLs` 1. Modify Sanguino `boards.txt` * Close Arduino * Locate Arduino15 folder - `C:\Users\<username>\AppData\Local\Arduino15` for Windows - `~/.arduino15` for Linux * Locate `boards.txt` in `packages/Sanguino/hardware/avr/1.0.2` (version number may change) * Add the following to the end of `boards.txt` (note that it is the same as sanguino.menu.cpu.atmega1284p but with a different name and upload speed) ## Malyan M150 W/ ATmega1284P 16MHz sanguino.menu.cpu.malyan_m150=Malyan M150 sanguino.menu.cpu.malyan_m150.upload.maximum_size=130048 sanguino.menu.cpu.malyan_m150.upload.maximum_data_size=16384 sanguino.menu.cpu.malyan_m150.upload.speed=57600 sanguino.menu.cpu.malyan_m150.bootloader.file=optiboot/optiboot_atmega1284p.hex sanguino.menu.cpu.malyan_m150.build.mcu=atmega1284p sanguino.menu.cpu.malyan_m150.build.f_cpu=16000000L 1. Configure Marlin * Copy `_Bootscreen.h`, `Configuration.h`, and `Configuration_adv.h` from `config/examples/Malyan/M150` to `Marlin` (overwrite files) * Read `Configuration.h` and make any necessary changes 1. Flash Marlin * Turn on printer while pressing scroll wheel button * Plug printer in to computer with USB cable * Open `Marlin/Marlin.ino` with Arduino * Configure Arduino - `Tools` -> `Board` -> `Sanguino` - `Tools` -> `Processor` -> `Malyan M150` - `Tools` -> `Port` -> Select your port * `Sketch` -> `Upload` or click arrow in top right corner