melch/Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Compare commits

base: melch:6af009537b10ff6c8e171f21d0c4332bdfcf28cb
Branches Tags
melch:x301
melch:2.0.x
...
compare: melch:7a96b06a6fe294b0fbd87fe20370226f0227b201
Branches Tags
melch:x301
melch:2.0.x

4 Commits
6af009537b ... 7a96b06a6f

Author SHA1 Message Date
Alfred Melch
7a96b06a6f Config: adjust PLA Temperatures 2021-08-19 16:59:27 +02:00
Alfred Melch
a6865b9233 Config: enable G26 mesh validation 2021-08-19 16:58:51 +02:00
Alfred Melch
281a576ff7 Config: refine bed size 2021-08-19 16:57:52 +02:00
Alfred Melch
09c3ddad95 Config: installed bed temp sensor 2021-08-19 16:57:05 +02:00
1 changed files with 12 additions and 12 deletions
Show Stats Expand all files Collapse all files

24
Marlin/Configuration.h
View File

@ -490,7 +490,7 @@
#define TEMP_SENSOR_5 0
#define TEMP_SENSOR_6 0
#define TEMP_SENSOR_7 0
#define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_BED 11
#define TEMP_SENSOR_PROBE 0
#define TEMP_SENSOR_CHAMBER 0
#define TEMP_SENSOR_COOLER 0
@ -1359,16 +1359,16 @@
// @section machine
// The size of the printable area
#define X_BED_SIZE 310
#define Y_BED_SIZE 310
#define X_BED_SIZE 300
#define Y_BED_SIZE 300
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
#define Y_MIN_POS 0
#define X_MIN_POS -7
#define Y_MIN_POS -2
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
#define Z_MAX_POS 320
//#define I_MIN_POS 0
//#define I_MAX_POS 50
//#define J_MIN_POS 0
@ -1577,14 +1577,14 @@
/**
* Enable the G26 Mesh Validation Pattern tool.
*/
//#define G26_MESH_VALIDATION
#define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26.
#define MESH_TEST_HOTEND_TEMP 200 // (°C) Default nozzle temperature for G26.
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26.
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves.
#define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves.
#define G26_XY_FEEDRATE 50 // (mm/s) Feedrate for G26 XY moves.
#define G26_XY_FEEDRATE_TRAVEL 200 // (mm/s) Feedrate for G26 XY travel moves.
#define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
#endif
@ -1846,8 +1846,8 @@
// Preheat Constants - Up to 5 are supported without changes
//
#define PREHEAT_1_LABEL "PLA"
#define PREHEAT_1_TEMP_HOTEND 180
#define PREHEAT_1_TEMP_BED 70
#define PREHEAT_1_TEMP_HOTEND 200
#define PREHEAT_1_TEMP_BED 60
#define PREHEAT_1_TEMP_CHAMBER 35
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255