Erik van der Zalm
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
2012-02-24 23:34:41 +01:00
Guillaume Seguin
adc108d79e
Correctly build the produced applet/Marlin.cpp source
2012-02-24 21:21:19 +01:00
Erik van der Zalm
5aa9c41ab1
Changed comment mode for detection.
...
Added M221 extuder multiply factor.
2012-02-24 20:42:07 +01:00
Erik van der Zalm
00690f7ffd
Fix cast warning in Gen7
2012-02-23 18:50:05 +01:00
Erik van der Zalm
01d28c18ab
Fixed casting warning in sanguino
2012-02-23 18:45:37 +01:00
Blair Thompson
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
2012-02-22 23:05:52 +00:00
Blair Thompson
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
2012-02-22 22:51:04 +00:00
Erik van der Zalm
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
2012-02-22 18:07:56 +01:00
Erik van der Zalm
df1437bd86
Changed display format for some numbers.
2012-02-21 23:05:43 +01:00
Erik van der Zalm
8816ef1c64
Small fixes after merge
2012-02-21 20:36:43 +01:00
Erik van der Zalm
d298dd121f
merged SBUBA82 and Justblair
2012-02-21 20:26:59 +01:00
Erik van der Zalm
2cc9a89830
Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1
2012-02-21 20:17:35 +01:00
Erik van der Zalm
a0a1f81913
various changes
2012-02-21 20:17:28 +01:00
Christian Thalhammer
8a8ea50f33
fixed manual axis movement lcd option
2012-02-21 09:31:28 +01:00
Blair Thompson
b976692d0f
Removed VS project files for tidyness stakes
2012-02-20 22:39:39 +00:00
Blair Thompson
fe940a142d
Added a structure that will allow easy translations/modifications to the LCD menu.
...
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
2012-02-20 22:22:46 +00:00
Christian Thalhammer
b3fb09a20c
change preheat to ABS values of nozzle 227 and be 105 �C
...
next try for manual axis movement
2012-02-20 16:07:27 +01:00
Christian Thalhammer
6a3f8cf23f
Infos about fuses to use; correct fuses in boards.txt
2012-02-20 10:25:51 +01:00
Blair Thompson
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
2012-02-18 23:56:31 +00:00
Blair Thompson
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
2012-02-18 18:25:04 +00:00
Christian Thalhammer
1ff99ae25f
ATMega1284P support for Arduino IDE
...
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
2012-02-17 11:41:47 +01:00
Christian Thalhammer
234fe8ea67
added infos for this fork
2012-02-17 11:07:24 +01:00
Christian Thalhammer
e661578c84
support for GEN7 1.1,1.2 and 1.3
2012-02-17 10:46:48 +01:00
Daid
73344e69c1
Added temperature offset/gain settings for AD595.
2012-02-16 11:05:08 +01:00
Christian Thalhammer
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
2012-02-13 13:07:55 +01:00
daid
3f20f37c78
Merge remote branch 'upstream/Marlin_v1' into Marlin_v1
2012-02-13 12:39:00 +01:00
Christian Thalhammer
0e3631ff4b
smaller changes
2012-02-13 12:31:53 +01:00
Erik van der Zalm
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
2012-02-12 17:38:54 +01:00
Erik van der Zalm
7699f250e3
Fixed small merge bug
2012-02-12 14:06:08 +01:00
Erik van der Zalm
11518a987f
merged with triffid fork
2012-02-12 13:58:36 +01:00
Erik van der Zalm
b447815de5
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
...
Simplified stepper inactive time
2012-02-12 18:02:12 +08:00
Erik van der Zalm
bde30b2b48
Corrected e-length calculation in planner
2012-02-12 18:02:12 +08:00
Erik van der Zalm
13e185d330
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
...
Simplified stepper inactive time
2012-02-11 23:22:16 +01:00
Erik van der Zalm
b58eae7657
Corrected e-length calculation in planner
2012-02-11 18:36:42 +01:00
ErikZalm
3e7fcb813e
Merge pull request #61 from daid/Marlin_v1
...
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 07:36:24 -08:00
daid
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 16:02:47 +01:00
Erik van der Zalm
d47a3e5950
Changed check i mtion_conrol
...
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
2012-02-09 21:02:01 +01:00
Erik van der Zalm
f87c80889f
Fixed M109 timer overflow (reported by triffid)
2012-02-09 20:54:49 +01:00
Erik van der Zalm
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
2012-02-09 20:26:17 +01:00
Erik van der Zalm
6ef8459494
Corrected distance calculation. (thanks jv4779)
2012-02-09 19:53:06 +01:00
Erik van der Zalm
598eb1d4f1
Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)
2012-02-09 19:38:53 +01:00
Erik van der Zalm
9173a5713b
Teensylu support.
2012-02-09 19:27:45 +01:00
Erik van der Zalm
da040fd393
Fixed ultimaker heater 1 pins. (Thanks daid)
2012-02-09 17:19:45 +01:00
Erik van der Zalm
bdb70c0509
Warning for 10k thermistor
2012-02-08 18:38:45 +01:00
Erik van der Zalm
5113513cb2
RC 1
2012-02-08 18:28:54 +01:00
Erik van der Zalm
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
2012-02-07 20:23:43 +01:00
Christian Thalhammer
4cc8e37bf1
lcd menue "move_axis" added
2012-02-07 12:58:05 +01:00
Christian Thalhammer
b5fae1104b
fixed sUICIDE_PIN disable
2012-02-07 08:50:26 +01:00
Erik van der Zalm
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
2012-02-06 20:13:44 +01:00
Erik van der Zalm
292ddd2edb
Fix Z_LATE_ENABLE
2012-02-06 17:38:16 +01:00