11520 Commits (4dad489a50cb6e5b63968e40ffb3874b70b395b3)
 

Author SHA1 Message Date
Christopher Pepper 42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 6 years ago
Christopher Pepper 61fbd0aa59 update lpc builds to use platformios ldf limited to strict mode
need to identify why incompatible libraries are still included without specifically disallowing them
6 years ago
Christopher Pepper 254b68fe2c servo update 6 years ago
Andy Shaw 870bfd08f5 usb and sdcard sharing improvements
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
6 years ago
Christopher Pepper 5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
6 years ago
Roman Moravčík 213e94bce2 [2.0.x] Updated slovak translation (#12059) 6 years ago
Karl Andersson a40458405a Fix datasize error when FWRETRACT is disabled (#12086) 6 years ago
Scott Lahteine 951b25163e
Extend M217 with configurable park/raise (#12076) 6 years ago
Kevin Velickovic ea13a77dcb Fixed Z-Probes NO/NC for Anycubic Kossel (#12083) 6 years ago
N95JPL ab9d5eb38d Add Bootscreen Animation (#12077) 6 years ago
Scott Lahteine 8653cedee4 Improve use_example_configs script 6 years ago
Scott Lahteine 26208a5c2f Clean up some boot screens 6 years ago
Scott Lahteine 9b6be0ae0f Fix lite status screen SD % 6 years ago
Scott Lahteine af3bf6c956 Tweak config spacing 6 years ago
Scott Lahteine a44ef27897 Outdent singlenozzle toolchange code 6 years ago
Scott Lahteine d338e4d875 Fix singlenozzle toolchange cold extrusion test 6 years ago
Roxy-3D 25b980dddb
Remove erroneous Pin 12 definition
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
6 years ago
Scott Lahteine ddaef1a60c Clean trailing whitespace 6 years ago
Scott Lahteine 49d4ed4d3f
Merge pull request #12063 from thinkyhead/bf2_sensitive_pins
Add MS3 pins. Optimize SENSITIVE_PINS.
6 years ago
Scott Lahteine 1407afad73 Move SENSITIVE_PINS to its own file 6 years ago
Scott Lahteine 45e738876a Add stepper MS3 support
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
6 years ago
Giuliano Zaro d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038)
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
6 years ago
Giuliano Zaro d8d76cd2ba [2.0.x] Italian language update (#12060) 6 years ago
Scott Lahteine e8d2cf4fb5 EEPROM followup (tmc_stepper_current_t) 6 years ago
Scott Lahteine 50cbca4c55 Hide some menu items when busy 6 years ago
InsanityAutomation 3cb5517ddb Make singlenozzle tool-change honor no_move (#12056)
...Set no move earlier so it applies
6 years ago
InsanityAutomation d332fcb8fa Fix firmware-retract compile errors (#12061) 6 years ago
Scott Lahteine 43940d59ed Fix trailing spaces 6 years ago
InsanityAutomation b2c1cd7eda Allow cold change of active extruder (#12055)
Followup to #11994
6 years ago
Scott Lahteine d556dc1865
Fix and improve EEPROM storage (#12054)
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
6 years ago
Scott Lahteine 9b5c1a5e77 Fix EEPROM checksum bug
Addressing #12048
6 years ago
Scott Lahteine 272d4a5167 Apply #pragma once 6 years ago
Scott Lahteine 07d33849b0 Fix unused var warning, apply ENABLED 6 years ago
Hannes Brandstätter-Müller a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 6 years ago
Scott Lahteine cf5284cdf2
Add SD Firmware Update capability (#12043)
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
6 years ago
Scott Lahteine 0bd54392b7 Use uint8_t in EEPROM code 6 years ago
Scott Lahteine ce82015d5f Fix include in G80 6 years ago
Marcio Teixeira cef1de89d0 Fixed incorrect axis index. (#12051) 6 years ago
Scott Lahteine d52deeb15a Adjust Travis CI tests 6 years ago
Marcio Teixeira d6d48e63fb Allow #defined TYPE arg to ultralcd menu macros (#12041)
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
6 years ago
Emilio Moretti 2ef7175b42 Update Ender-2 BED_MAXTEMP (#12042)
Also added details to the README to make sure the Ender-2 status is properly documented.
6 years ago
Scott Lahteine 7f94ca950e Add Marlin icons graphics file 6 years ago
Scott Lahteine 5f6aabccbe Tweak M48 spacing 6 years ago
Marcio Teixeira ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039)
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
6 years ago
Marcio Teixeira 906a24fa81 Extensible user interface API (#11193) 6 years ago
InsanityAutomation ee253991d4 Various fixups for single-nozzle filament swap (#12036) 6 years ago
Marcio Teixeira 8dbb305e8e Fix "Missing separator" errors. (#12035)
- Makefiles require tabs (not spaces) before shell commands.
- Other indentation can either be space or tabs.
6 years ago
Scott Lahteine 55e810d512 Fix G80 compilation 6 years ago
Scott Lahteine d5017e2788 Add status screen with 4 nozzles 6 years ago
Scott Lahteine 7db0113b53 Improve E_AXIS_N macro 6 years ago