melch/Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
7,509 Commits 2 Branches 0 Tags 2 GiB
11d34be060
Commit Graph

6212 Commits

Author SHA1 Message Date
Sebastianv650
271ced7341 Prevent re-entering of temperature ISR 
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
 2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb Cleanup position_float 
Hopefully fixes Marlin #5481
 2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d Merge pull request #5815 from thinkyhead/rc_pulses_per_step 
Give encoder pulse/steps conditionals their own block
 2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605 Merge pull request #5814 from thinkyhead/hotend_loop_always 
Make HOTEND_LOOP more consistent, let compiler optimize it
 2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5 Merge pull request #5811 from thinkyhead/fix_two_strings 
No space after X: or A: in M114 output
 2017-02-12 04:11:51 -06:00
jes
eaa829b58c Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly 2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8 Give encoder pulse/steps conditionals their own block 2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d Make HOTEND_LOOP more consistent, let compiler optimize it 2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection 
guaranteed BLTouch detection
 2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06 No space after X: or A: in M114 output 2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6 Fix SD_CHECK_AND_RETRY condition 
Addressing #5806
 2017-02-11 23:55:56 -06:00
Scott Lahteine
1bc5be3bdf Cast DELTA_PRINTABLE_RADIUS to float in sq() 
Addressing #5625
 2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1 guaranteed BLTouch detection 
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.

At 200 steps per mm, my system has problems  below a feedrate of 120 mm
per minute.

Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR.  If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero.  This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.

2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS.  The "extra" ISR runs only check the
endstops.  This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.

=========================================

BLTouch error state recovery

If BLTouch already active when deploying the probe then try to reset it
& clear the probe.

If that doesn't fix it then declare an error.

Also added BLTouch init routine to startup section
 2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915 Fix typo in language_uk 
Thanks to @pavlus for this one
 2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be Merge pull request #5793 from thinkyhead/rc_adjust_probe_output 
Adjust probe_pt() terminal output to respect probe z-offset
 2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1 Merge pull request #5792 from thinkyhead/rc_default_dac_vals 
Default DAC values for RigidBoard V2
 2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c Adjust probe_pt() terminal output to respect probe z-offset 2017-02-09 22:54:22 -06:00
Scott Lahteine
a245656db3 Merge pull request #5713 from gege2b/RCBF-French 
French translation : Added missing strings as well as missing accents
 2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a Default DAC values for RigidBoard V2 2017-02-09 22:39:00 -06:00
Bob-the-Kuhn
ae706233a8 pinsDebug for 644/1284 & USB646/1286 families 
added conditional compilation for PWMs 1C & 3C

add Teensyduino compatibility

==========================================

changes per review - minor formatting changes

1) remove non-printable character at the end of line 687

2) split a really long comment into two lines

3) got rid of some trailing spaces

============================================

Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.

The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
 2017-02-09 07:24:02 -06:00
Gege2B
22dfcc9a71 French translation : Added missing strings as well as missing accents 2017-01-17 23:29:23 +01:00
Scott Lahteine
9b5515926a Merge pull request #5696 from thinkyhead/rc_volumetric_default 
Allow enabling volumetric filament on config load
 2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe Replace all remaining 'boolean' with 'bool' 2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974 Fix M110 without leading N 
Store N in the right variable.
This is too rarely used.

"mea culpa, mea culpa, mea maxima culpa"
 2017-01-13 12:33:50 +01:00
Scott Lahteine
0c0c840ba8 Merge pull request #5683 from emartinez167/EMartinez-Changes 
Updates to some incorrectly ended strings in the Spanish translation
 2017-01-12 07:49:15 -08:00
Kai
25dae3bccc Update language_de.h 
Small corrections
 2017-01-12 16:06:58 +01:00
emartinez167
7292145f4e Fix for some wrong strings 
On last commit, some strings were ended with the incorrect character.
This fixes it.
 2017-01-12 22:35:04 +08:00
Scott Lahteine
93a9aa6b76 Merge pull request #5682 from thinkyhead/rc_spanish_jan 
Updates to Spanish language
 2017-01-12 06:14:10 -08:00
Scott Lahteine
7a9c1a279b Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop 
Reset watchdog in SD init to prevent reboot
 2017-01-12 06:13:56 -08:00
Scott Lahteine
e409c7f9e8 Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds 
From "microseconds" to "milliseconds"
 2017-01-12 06:02:55 -08:00
emartinez167
020c6af7b0 Updates to Spanish language 
Add missing Spanish language definitions.
 2017-01-12 05:53:39 -08:00
Hans Raaf
d29cc8f7bc Reset watchdog in SD init to prevent reboot 
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
 2017-01-12 05:33:38 -08:00
Scott Lahteine
7743849608 Merge pull request #5680 from thinkyhead/rc_configs_puhlease 
code_value_float tweak
 2017-01-12 05:22:47 -08:00
Scott Lahteine
16357fbfdf Merge pull request #5619 from Ocarthon/RCBugFix 
Disable SD Detect for K8400
 2017-01-12 05:22:03 -08:00
Scott Lahteine
e57c0fce66 Move MOSFET changes above #include for RIGIDBOARD 
Correction to #5629
 2017-01-12 04:46:49 -08:00
Scott Lahteine
c376f6a2cb code_value_float tweak 2017-01-12 04:38:09 -08:00
Scott Lahteine
fb3c30e24c Fix lcd_wait_for_homing causing menu to block 
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
 2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix 
Fix empty Prepare menu
 2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a Remove error causing break command 
Use index macro instead of e
 2017-01-01 17:47:01 -05:00
esenapaj
d38e335272 From "microseconds" to "milliseconds" 
delay() is milliseconds
 2017-01-02 01:19:33 +09:00
Philip Standt
8ae2bc7e2e Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
Scott Lahteine
4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine
922c67f17d Merge pull request #5588 from thinkyhead/rc_remove_biv25 
Drop biv2.5 delta configurations
 2016-12-23 19:14:50 -08:00
Scott Lahteine
8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Scott Lahteine
92dbeebf40 Define ADV_NEVER, ADV_RATE 2016-12-23 18:43:23 -08:00
Robert Kirk
306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
Scott Lahteine
fe2ea2906f Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr 
LIN_ADVANCE with unified stepper ISR
 2016-12-21 02:53:32 -08:00
Sebastianv650
84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine
83021d82c6 Merge pull request #5502 from AnHardt/symbol-strings 
Add symbol-strings
 2016-12-21 00:51:59 -08:00
Scott Lahteine
036eccfd6e Merge pull request #5572 from Kaibob2/patch-5 
Update language_de.h
 2016-12-21 00:50:40 -08:00
Scott Lahteine
b794b76836 Merge pull request #5567 from AnHardt/fix5194 
Fix 5194
 2016-12-21 00:49:52 -08:00
Scott Lahteine
451ba5df01 Merge pull request #5516 from esenapaj/Suppress-warning 
Suppress warning
 2016-12-21 00:00:35 -08:00
Scott Lahteine
92dbc63949 Merge pull request #5571 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-20 23:59:55 -08:00
Kai
ade72535c4 Update language_de.h 
Added tarnslation for
```
#define MSG_DEBUG_MENU 
#define MSG_PROGRESS_BAR_TEST
```
 2016-12-21 08:57:39 +01:00
esenapaj
ab6b005867 Suppress warning 2016-12-21 09:13:03 +09:00
AnHardt
61f15ef7e7 Fix 5194 
I have been a bit too radical in cleaning up this section.
 2016-12-21 00:45:29 +01:00
esenapaj
60515ff700 Update Japanese translation 
・Add new translation
 2016-12-21 08:44:07 +09:00
Scott Lahteine
1e419655f3 Followup to #5550 - spacing before "mm" 2016-12-20 02:27:54 -08:00
Scott Lahteine
1a26ce1cdc Merge pull request #5550 from FHeilmann/patch-2 
Allow negative retract values in the LCD
 2016-12-20 02:10:22 -08:00
Scott Lahteine
bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x 
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
 2016-12-20 01:31:53 -08:00
Scott Lahteine
7739c0affa Change "+mm" to "mm" in most languages 
- Japanese and Chinese still need update
 2016-12-20 01:16:51 -08:00
Scott Lahteine
1cba425308 Allow negative recover-swap length from LCD 2016-12-20 01:16:08 -08:00
Scott Lahteine
298a8c6a3c Merge pull request #5561 from thinkyhead/rc_no_case_light 
Support for M335 case light "no case light"
 2016-12-20 01:06:59 -08:00
Scott Lahteine
644f45cbd8 Merge pull request #5563 from akaJes/m600 
FILAMENT_CHANGE_FEATURE allowed in idle mode
 2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516 Place "Level Bed" closer to "Auto Home" 2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf Encoder events should not skip stripes 2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9 Fix updating of "bool" menu items 2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94 No "Cooldown" menu if heaters are off 2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff m600 fixes 2016-12-20 09:47:46 +02:00
Damien
4e2639942b Support for M335 case light "no case light" 2016-12-19 23:23:08 -08:00
Scott Lahteine
18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
Scott Lahteine
03af5961b0 Hide (or remove) custom character change on boot screen 2016-12-19 22:27:28 -08:00
Scott Lahteine
1642f5ed31 Add macro to some en strings 2016-12-19 22:27:28 -08:00
Scott Lahteine
dbb2d56c89 Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
Scott Lahteine
41a30923f3 Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version 
Throw an error for gcc before 4.7
 2016-12-19 19:50:44 -08:00
Scott Lahteine
6d6a1db6ec Apply const to _EEPROM_writeData value param 2016-12-19 18:50:43 -08:00
Robert Kirk
f724ef5820 Have bed leveling status output current status, not requested. 2016-12-19 18:47:45 -08:00
Scott Lahteine
20218e553d Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size 
Fix size
 2016-12-19 18:47:28 -08:00
Scott Lahteine
dcfbe2bd3c Throw an error for gcc before 4.7 2016-12-19 18:30:51 -08:00
Scott Lahteine
82fde7df2e Merge pull request #5512 from AnHardt/speed-compare-bbr 
Optimize handling of block_buffer_runtime()
 2016-12-19 18:21:06 -08:00
Scott Lahteine
8986225752 Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
Scott Lahteine
e12c8e5cac Split up thermistor tables 2016-12-19 14:47:54 -08:00
Florian Heilmann
a7334fd2a0 Allow negative retract values in the LCD 
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
 2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6 Optimize handling of block_buffer_runtime() 
millis_t is long - divisions take for ever.

Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)

That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
 2016-12-19 11:47:28 +01:00
esenapaj
6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine
3f6f036f7c Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup 
Report EEPROM data size, not final index
 2016-12-16 18:55:48 -08:00
MagoKimbra
86ba7e4542 Fix size 
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
 2016-12-16 14:49:33 +01:00
Scott Lahteine
f9f75c8016 Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to 2016-12-15 23:15:38 -08:00
Scott Lahteine
87921f390a Clarify what are "logical" positions in the planner 2016-12-15 23:15:38 -08:00
Scott Lahteine
a4f10f59c3 Write the E parameter length correctly 2016-12-15 23:15:38 -08:00
Scott Lahteine
2e904cb4f9 Merge pull request #5514 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-15 21:38:40 -08:00
Scott Lahteine
0b6817e0f9 Merge pull request #5505 from android444/patch-4 
Update for translations language_pl.h
 2016-12-15 21:38:18 -08:00
Scott Lahteine
3bd76f60e4 Report EEPROM data size, not final index 2016-12-15 20:26:28 -08:00
Scott Lahteine
78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh 
Save Bed Leveling to EEPROM
 2016-12-15 20:23:01 -08:00
Scott Lahteine
0d0aa6c20d Patch type for max_acceleration_mm_per_s2 save/restore 2016-12-15 20:05:42 -08:00
Scott Lahteine
d4f5418802 Merge pull request #5517 from esenapaj/Fix-for-PR-#5255 
Fix for the PR #5255 (Case light menu (3rd attempt))
 2016-12-15 20:01:22 -08:00
Scott Lahteine
fa7010b0a1 Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces 
Remove unnecessary tabs and spaces
 2016-12-15 19:58:32 -08:00
Scott Lahteine
6d7b1cdf6c Add M421 for ABL Bilinear 2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429 Extend M420 to print state and, with V, the matrix / mesh 2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b Don't throw away the bed level matrix on G28 2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10 Save ABL Planar Matrix to EEPROM 2016-12-15 19:21:15 -08:00
Scott Lahteine
e2429a9da1 Generalize Bed Leveling flag in EEPROM 2016-12-15 19:20:52 -08:00
Scott Lahteine
e42fd7813a Save ABL Bilinear Grid to EEPROM 2016-12-15 19:20:48 -08:00
Scott Lahteine
492b68f8e3 Better EEPROM read/write error handling 2016-12-15 19:08:44 -08:00
Scott Lahteine
55722c09da Use "UNPROBED" for un-probed bed_level_grid points 2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8 Throw an error in M420 if can't enable 2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd Use planner.unapply_leveling to undo tilt in G29 2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb Re-enable MBL/ABL after M48 2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672 Minor tweak to G29 grid points 2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f Fix comment on G29 to include 'Z' 2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2 Tweak call to reset_bed_level in G29 2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734 Fixup reset_bed_level 2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj
d486361c69 Fix for commented section of Config_RetrieveSettings() 2016-12-16 04:34:47 +09:00
esenapaj
88157ba529 Fix for the PR #5255 (Case light menu (3rd attempt)) 2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
esenapaj
9c8116aedf Update Japanese translation 
・Add new translation
 2016-12-16 00:06:58 +09:00
AnHardt
57b1275cde Add symbol-string to _de 
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
 2016-12-15 14:37:18 +01:00
android444
3363d2c937 Update for translations language_pl.h 2016-12-14 17:32:33 +01:00
Scott Lahteine
06af3b62ba Move HOLLOW_FRAME options to config_adv 2016-12-14 04:31:27 -08:00
Scott Lahteine
67ca6c7bfe Codestyle tweaks to ultralcd.cpp 2016-12-14 04:20:33 -08:00
Scott Lahteine
8d9fcd8e6f Merge pull request #5495 from AnHardt/autoadjusting_display-updates 
Adaptive screen updates for all kinds of displays
 2016-12-14 04:16:26 -08:00
Scott Lahteine
77a360912d Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers 
UTF-8 language header files
 2016-12-14 02:23:09 -08:00
AnHardt
d0e24e0876 Adaptive screen updates for all kinds of displays 
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
 2016-12-13 18:44:34 +01:00
yhfudev
2dbd38ce16 tag the utf-8 strings 2016-12-13 11:54:35 -05:00
Scott Lahteine
94ffb58da7 Prevent retract un-hop at wrong height 2016-12-13 08:24:12 -08:00
Scott Lahteine
0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis 
Rearrange Move Menu, Fix up Delta Calibration
 2016-12-13 07:07:05 -08:00
Scott Lahteine
b2c8de856b Merge pull request #5478 from AnHardt/stepspermm 
Replace ftostr62sign with ftostr62rj
 2016-12-13 07:05:42 -08:00
Scott Lahteine
1fd8185d37 Merge pull request #5492 from thinkyhead/rc_fix_language_es 
Fix multiple definitions of message macros in the language-es.h
 2016-12-13 06:57:52 -08:00
yhfudev
1cdffdede7 fix multiple definitions of message macros in the language-es.h 2016-12-13 06:48:38 -08:00
Scott Lahteine
b67f8cb499 Merge pull request #5490 from jbrazio/update-bqhp2 
Update the bq Hephestos 2 example configuration
 2016-12-13 05:04:24 -08:00
Scott Lahteine
93b2833347 Move Menu: Select axis first, resolution after 2016-12-13 03:11:14 -08:00
Scott Lahteine
48aa0f6475 Merge pull request #5475 from AnHardt/utf-mapper-tr 
utf8-mapper for Turkish
 2016-12-13 03:03:22 -08:00
Scott Lahteine
b9ee0d7bd3 Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn 
Patch fade_factor compiler warning
 2016-12-13 03:00:47 -08:00
Scott Lahteine
641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a Non-reentrant "Moving..." screen to safely wait in LCD 2016-12-13 02:42:27 -08:00
Scott Lahteine
7b625e0048 Patch fade_factor compiler warning 2016-12-13 02:29:01 -08:00
Scott Lahteine
6fa8fd15e2 Add negative temperatures for Thermistor 1 
Changes from #5485 by @AndKe
 2016-12-13 02:06:16 -08:00
Scott Lahteine
2b5d424394 Use handle_reprapworld_keypad for keypad handling 2016-12-13 01:41:08 -08:00
Scott Lahteine
887ed73c9b Expose delta_clip_start_height for use by others 2016-12-13 01:41:08 -08:00
João Brázio
3f75edb1d6 Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
Daniel Martinez
b796e7031d Update Aragonese translation 2016-12-12 17:36:33 -08:00
AnHardt
cd2b74e88d Replace ftostr62sign with ftostr62rj 
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
 2016-12-12 20:25:20 +01:00
AnHardt
795541f87e utf8-mapper for Turkish 
The non utf8 version of turkish is a bit unhandy.

Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
 2016-12-12 15:56:59 +01:00
Scott Lahteine
7c71bb2900 Merge pull request #5471 from thinkyhead/rc_planner_report_m503 
Patch to show E factors in M503
 2016-12-11 17:47:41 -08:00
Scott Lahteine
39401b7472 Patch to show E factors in M503 2016-12-11 17:37:29 -08:00
Scott Lahteine
6b50230022 Merge pull request #5447 from thinkyhead/rc_update_dutch 
Dutch cleanup, ordering, placeholders
 2016-12-10 22:13:20 -08:00
Scott Lahteine
2c97c11731 Merge pull request #5454 from thinkyhead/rc_fix_delta_g29 
Fix G29 starting height on DELTA
 2016-12-10 22:10:33 -08:00
Scott Lahteine
8239c45b30 Merge pull request #5448 from thinkyhead/rc_eeprom_bump 
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
 2016-12-10 22:06:00 -08:00
Scott Lahteine
21ed43df5f New Dutch terms 2016-12-10 21:59:45 -08:00
Scott Lahteine
4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 2016-12-10 21:28:24 -08:00
Scott Lahteine
6f389158d7 Compile less code with EEPROM off 2016-12-09 06:05:32 -08:00
Scott Lahteine
f2301a2a04 Add e-stepper count to EEPROM (for planner vars) 2016-12-09 06:05:31 -08:00
Scott Lahteine
53c9fca0f6 Only write to EEPROM when a byte changes 2016-12-09 06:05:31 -08:00
AnHardt
13eebd11cf volatile_block_buffer_runtime_us 
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
 2016-12-09 14:49:02 +01:00
Scott Lahteine
8383f35b40 Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code 
Slightly shrink jerk and advance code
 2016-12-09 02:54:03 -08:00
Gege2B
40453c1b9a Update french translation (LIGHTS str) 2016-12-09 11:18:29 +01:00
Scott Lahteine
fc2fc828b3 Prettify LIN_ADVANCE code with the positive condition 2016-12-09 00:29:07 -08:00
Scott Lahteine
1929502e15 Add const to some variables 2016-12-09 00:29:06 -08:00
Scott Lahteine
2da4d22520 Pretty up ADVANCE code 2016-12-08 22:51:28 -08:00
Scott Lahteine
af024e1d7c Pretty up coast / reverse jerk code 2016-12-08 22:50:25 -08:00
Scott Lahteine
3f3b5c86d8 Slightly shrink code for jerk-based reduction of safe_speed 2016-12-08 22:24:29 -08:00
AnHardt
87fe20b5f5 Simplify long_move() 
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
 2016-12-09 00:13:35 +01:00
Scott Lahteine
574d9c7d3d Merge pull request #5432 from Kaibob2/patch-2 
Update language_de.h
 2016-12-08 13:14:04 -08:00
Scott Lahteine
f089279263 Merge pull request #5431 from esenapaj/Suppress-warnings,-etc 
Suppress warnings, etc
 2016-12-08 13:10:12 -08:00
Scott Lahteine
d92ccb230c Merge pull request #5438 from AnHardt/patch-long_move 
Patch long_move()
 2016-12-08 13:08:36 -08:00
AnHardt
706b240251 Patch long_move() 
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
 2016-12-08 21:03:26 +01:00
esenapaj
a298a58684 Remove redundant "E" 2016-12-09 02:27:34 +09:00
Kai
390a6d976a Update language_de.h 
#define MSG_ENDSTOP_ABORT  doesn't fit in Display 
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
 2016-12-08 12:18:19 +01:00
esenapaj
e9393c3634 Suppress warnings, etc 
・Suppress warnings
・Remove unused variable "did_update"
 2016-12-08 17:47:59 +09:00
Scott Lahteine
da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop 
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
 2016-12-08 00:12:19 -08:00
Scott Lahteine
3fb43c11fc Fix compile error with LCD_I2C_VIKI 2016-12-07 23:29:45 -06:00
Scott Lahteine
aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
Scott Lahteine
c8a95ec514 Merge pull request #5413 from MagoKimbra/rc_fix_mesh 
Fix Mesh without Fade Height
 2016-12-07 03:16:02 -06:00
Scott Lahteine
35ad9626f1 Merge pull request #5410 from thinkyhead/rc_polish_update 
Update Polish language, reduce filament change messages
 2016-12-07 03:15:53 -06:00
Scott Lahteine
01e5d46ea7 Patch some planner compile errors 2016-12-07 02:26:24 -06:00
MagoKimbra
5383212a28 Fix Mesh without Fade Height 2016-12-07 09:23:42 +01:00
Scott Lahteine
dbe1dc1452 Merge pull request #5406 from Rigid3D/RCBugFix 
Turkish Translation Update
 2016-12-07 00:56:08 -06:00
Scott Lahteine
4783a59249 Remove filament-change empty lines from languages 2016-12-07 00:53:03 -06:00
Scott Lahteine
1705099c3e Save space by not defining unused filament change message lines 2016-12-07 00:53:03 -06:00
android444
9b1f4b514b Update Polish language 
Translation of messages in English to Polish.
 2016-12-06 22:28:33 -06:00
Robert Marko
84f7e1de04 Updates to Croatian language 2016-12-06 22:24:12 -06:00
esenapaj
08cdaaf19b README and Version for 1.1.0-RCBugFix 
Sync with RC8
 2016-12-07 10:43:58 +09:00
Mehmet Sutas
f4663cb677 Update language_tr_utf8.h 2016-12-07 00:21:56 +03:00
Mehmet Sutas
b4fd115d4e Update language_tr.h 2016-12-07 00:20:07 +03:00
Scott Lahteine
83c5026db1 Ignore homing button when SD printing 
As suggested in #5404 by @android444
 2016-12-06 14:22:34 -06:00
Scott Lahteine
312caef472 Merge pull request #5398 from thinkyhead/rc_croatian_cleanup 
Fix Croatian spacing, extra #endif
 2016-12-06 03:22:19 -06:00
Scott Lahteine
46b65773ea Fix Croatian spacing, extra #endif 2016-12-06 03:10:37 -06:00
Scott Lahteine
3f2faac9d1 Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear 
Subdivide Bilinear Grid with Catmull Rom Splines
 2016-12-05 20:28:50 -06:00
Scott Lahteine
b5b5edd9ad Merge pull request #5394 from thinkyhead/rc_drop_board_99 
Remove mystery-board 99
 2016-12-05 20:28:35 -06:00
Scott Lahteine
c48901f355 Remove mystery-board 99 2016-12-05 20:16:50 -06:00
akaJes
d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine
6253b765aa Merge pull request #5389 from thinkyhead/distribute_screen_updates 
Distribute GLCD screen updates in time
 2016-12-05 20:08:33 -06:00
Scott Lahteine
b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures 
Fix auto_report_temperatures()
 2016-12-05 19:38:23 -06:00
AnHardt
59a27ed27d Fix auto_report_temperatures() 
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
 2016-12-06 01:26:44 +01:00
AnHardt
a6fbd4a5d8 Distribute GLCD screen updates in time 
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.

This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.

Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.

13:45:59.213 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30;   #:17 >:13 s:30;   S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59

03:30:36.779 : echo: #:8 >:7 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:9 >:7 s:16;   #:8 >:6 s:14;   S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:8 >:8 s:16;   #:8 >:6 s:14;   S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:9 >:6 s:15;   S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14;   #:10 >:8 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:7 s:15;   #:9 >:6 s:15;   S#:36 S>:26 S:62

#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
 2016-12-05 12:22:54 -06:00
Scott Lahteine
f882355994 Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements 
Account for LCD improvements in ENSURE_SMOOTH_MOVES
 2016-12-05 11:23:58 -06:00
Scott Lahteine
20e834461d Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal 
Show decimal for small numbers in ftostr4sign
 2016-12-05 11:22:45 -06:00
Scott Lahteine
b6b100c471 Merge pull request #5371 from thinkyhead/rc_extruders_can_differ 
Allow distinct factors for multiple extruders
 2016-12-05 11:22:31 -06:00
Scott Lahteine
449d9cbf60 Add placeholders for Polish translatable strings 2016-12-05 10:37:00 -06:00
c64pl
643dc4b64e Update language_pl.h 
Fixed translations
 2016-12-05 10:37:00 -06:00
Scott Lahteine
0974b75fb6 Merge pull request #5386 from thinkyhead/rc_galician_update 
Galician language update.
 2016-12-05 10:36:26 -06:00
Rafa Couto
2b9115330d Galician language update. 2016-12-05 10:11:28 -06:00
Scott Lahteine
1f3e2440bc Merge pull request #5175 from thinkyhead/rc_dualx_homing 
Unpark when using Z_SAFE_HOMING with Dual X
 2016-12-05 10:02:56 -06:00
Scott Lahteine
d5bf1684fe Implement as optional feature LCD_DECIMAL_SMALL_XY 
And reduce the function size to simplify
 2016-12-05 09:26:05 -06:00
Guthenberg
bfb8d3b53e Show more decimals in Display, if possible 
_123, -123, _-12, __-1  plus  1234, 12.3, -1.2
 2016-12-05 09:05:46 -06:00
Scott Lahteine
1e30d1da47 Simplify itostr4sign 
- This function becomes obsolete if ftostr4sign is re-written.
 2016-12-05 09:05:46 -06:00
Scott Lahteine
82a187acae Merge pull request #5359 from AnHardt/update-de 
Add missing translations to lang-de
 2016-12-05 07:31:28 -06:00
Scott Lahteine
4bafdf4b66 Support DISTINCT_E_FACTORS in LCD Motion Menu 2016-12-05 07:26:18 -06:00
Scott Lahteine
3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine
0dfe95eaba Adjust formatting in Planner 2016-12-05 07:26:17 -06:00
Scott Lahteine
09587f7c0d Fix rows error in DOGM 2016-12-05 07:14:11 -06:00
Scott Lahteine
c47e07d129 Fix Dual X software endstops 2016-12-05 06:51:41 -06:00
Scott Lahteine
4217e9653e Adjust park code in tool_change 2016-12-05 06:51:41 -06:00
Scott Lahteine
b20405db31 Only DXC_AUTO_PARK_MODE should auto-move in tool_change 2016-12-05 06:48:43 -06:00
Scott Lahteine
ca24af7d5d Dual X with home_z_safely is not parked 2016-12-05 06:43:26 -06:00
Scott Lahteine
0e15b4f434 Dual X set_axis_is_at_home can use x_home_pos for both 2016-12-05 06:43:26 -06:00
Scott Lahteine
54109dfaec Reduce code size for Dual X un-park 2016-12-05 06:43:26 -06:00
Scott Lahteine
fe96f74db1 Use const arguments in Dual X helper functions 2016-12-05 06:43:26 -06:00
Scott Lahteine
41278c1e8b Apply LOGICAL_POSITION to home positions on Dual X 2016-12-05 06:43:26 -06:00
Scott Lahteine
053fb55af6 Fix modes ordering in prepare_move_to_destination_dualx 2016-12-05 06:43:26 -06:00
Scott Lahteine
ee50928eee Make LOGICAL and RAW position macros ternary-compatible 2016-12-05 06:43:26 -06:00
Scott Lahteine
56dd15c0ad Use SET_INPUT for PS_ON_PIN in kill 2016-12-05 06:43:26 -06:00
Scott Lahteine
200cf3e9f9 Merge pull request #5381 from thinkyhead/rc_fix_fade_factor 
Properly apply fade_factor to MBL
 2016-12-05 06:06:13 -06:00
Scott Lahteine
84ff78c1e3 Pass the fade factor to mbl.get_z 2016-12-05 03:01:51 -06:00
Scott Lahteine
85c2b96685 Apply const to MBL class methods 2016-12-05 02:50:59 -06:00
Scott Lahteine
c06161b773 Use apply_leveling, not MBL directly 2016-12-05 01:53:36 -06:00
Scott Lahteine
818f8b93d3 Merge pull request #5378 from thinkyhead/rc_duration_rj 
Better alignment of elapsed print time
 2016-12-04 22:42:23 -06:00
Scott Lahteine
9d88a61d52 Better alignment of elapsed print time 2016-12-04 21:30:49 -06:00
Scott Lahteine
0b53d78046 Tweak editable items for debugging 2016-12-04 03:51:10 -06:00
Scott Lahteine
fccc97de6d Save PROGMEM with string changes 
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
 2016-12-03 19:21:46 -06:00
AnHardt
e7fc353f08 Add missing translations to lang-de 2016-12-03 20:51:49 +01:00
Scott Lahteine
3f2cb376e0 Add placeholders for Bulgarian translation 2016-12-03 12:14:02 -06:00
Scott Lahteine
b22d37ba52 Merge pull request #5364 from thinkyhead/rc_croatian_update 
Update Croatian to include missing strings
 2016-12-03 11:37:42 -06:00
Robert Marko
b796a687ca Update Croatian to include missing strings 
Added all missing strings according to English
 2016-12-03 11:15:41 -06:00
Scott Lahteine
255ed80164 Fix hotend offset report in M503 2016-12-03 10:17:35 -06:00
Petr Zahradník
c66f3ed34b
Update Czech 2016-12-03 10:32:34 +01:00
Scott Lahteine
cbf208ea1f Merge pull request #5348 from Kaibob2/patch-1 
Update language_de.h
 2016-12-03 01:53:24 -06:00
Scott Lahteine
a2660cf688 Merge pull request #5347 from tnw513/fix-italian 
Added missing translations
 2016-12-03 01:52:45 -06:00
Scott Lahteine
27dd5acc22 Fix set_led_color for BLINKM 
Follow-up to #5330
 2016-12-03 01:51:11 -06:00
Kai
8530c32309 Update language_de.h 
Grammar corrections
 2016-12-02 19:40:36 +01:00
Silvio Didonna
f1d5ffa211 Added missing translations 2016-12-02 18:49:39 +01:00
Scott Lahteine
b0361ebe4f Merge pull request #5343 from thinkyhead/rc_invert_case_light 
Allow case light pin to be active low
 2016-12-02 01:17:11 -06:00
Scott Lahteine
f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine
3f4c02e42f Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper 
Allow UART ISRs inside the stepper ISR
 2016-12-01 23:17:42 -06:00
Scott Lahteine
d07229f185 Fix redraw in SD Card menus 2016-12-01 18:15:58 -06:00
Scott Lahteine
47b4b21308 Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072 
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
 2016-12-01 13:37:02 -06:00
Scott Lahteine
8d14420331 Fix compile without ENABLE_LEVELING_FADE_HEIGHT 2016-12-01 11:37:24 -06:00
Scott Lahteine
415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led 
Support for an RGB LED using 3 pins
 2016-11-30 14:14:00 -06:00
esenapaj
0909cf3d46 Adjust spacing 2016-11-30 19:39:39 +09:00
esenapaj
8e9e9c17b0 Follow-up the PR #5323 (Adding ukrainian language support) 
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
 2016-11-30 19:39:39 +09:00
esenapaj
d92ce8849b Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc 
・Make descriptions the same as others
 2016-11-30 19:39:38 +09:00
Scott Lahteine
e00b380489 Merge pull request #5323 from akaJes/lang-ua 
Adding ukrainian language support
 2016-11-30 01:10:40 -06:00
Scott Lahteine
65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
esenapaj
3047f3c85c Suppress warning 2016-11-30 00:32:56 +09:00
jes
f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
jes
c90191faaf adding ukrainian laguage support 2016-11-29 14:49:45 +02:00
Sebastianv650
912704a0d8 Enable ISRs inside temperature ISR 
to capture chars at UART at 250000 baud.
 2016-11-28 20:08:50 +01:00
Sebastianv650
f62f4006af Account for LCD improvements in ENSURE_SMOOTH_MOVES 
.. and give the hint to try lower values if possible.
 2016-11-28 17:44:19 +01:00
Scott Lahteine
092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted 
Support for COREYX, COREZX, COREZY
 2016-11-28 02:26:41 -06:00
Scott Lahteine
e9e4208ff1 Merge pull request #5274 from Sebastianv650/improve_smooth_moves 
Improvement for ENSURE_SMOOTH_MOVES
 2016-11-28 02:22:08 -06:00
Scott Lahteine
c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade 
Add a fade factor for mesh leveling
 2016-11-28 02:07:51 -06:00
Scott Lahteine
a69b1ee691 Merge pull request #5313 from thinkyhead/rc_fix_menu_actions 
Keep drawing menu unless screen changes
 2016-11-28 02:01:39 -06:00
Scott Lahteine
32ee3acf86 Merge pull request #5315 from thinkyhead/rc_fixup_material_menus 
Refine material heatup menu items
 2016-11-28 01:46:51 -06:00
Scott Lahteine
c70a06daf1 lcd_save_previous_menu => lcd_save_previous_screen 2016-11-28 01:46:18 -06:00
Scott Lahteine
13ea43cc8d Only exit menu handler when the screen changes 2016-11-28 01:46:18 -06:00
Scott Lahteine
f45b6a7762 Merge pull request #5314 from thinkyhead/case_light_menu_fix 
Fix and optimize case-light code
 2016-11-28 01:45:27 -06:00
Scott Lahteine
59fafb93b2 Merge pull request #5304 from AnHardt/pixel-shifting 
MENU_HOLLOW_FRAME for the menu screens
 2016-11-28 01:41:47 -06:00
Scott Lahteine
0951d385ce Don't set heater temperature above its maximum 2016-11-28 01:37:24 -06:00
Scott Lahteine
c9193e856d Limit preheat parameters based on all nozzles 2016-11-28 01:37:24 -06:00
Scott Lahteine
bb4529f7d2 PLA / ABS => Material 1 / 2 2016-11-28 01:37:24 -06:00
Scott Lahteine
61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
AnHardt
7a9fa78822 MENU_HOLLOW_FRAME for the menu screens 
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
 2016-11-27 22:59:05 +01:00
AnHardt
24ca1a6289 Not more then 4 stripes for u8g-devices 
To optimise speed.
Costs well invested 128Byte of RAM.
 2016-11-26 19:08:33 +01:00
Scott Lahteine
aee71c543e Minor formatting in language.h 2016-11-26 06:53:52 -06:00
Scott Lahteine
05d8d189f6 Adjust spacing in utf_mapper.h 2016-11-26 06:53:52 -06:00
Scott Lahteine
5460a529da Add option DOGM_SPI_DELAY_US 2016-11-26 06:53:52 -06:00
Scott Lahteine
71842b6a17 Apply const to LCD arguments and locals 2016-11-26 06:53:52 -06:00
Scott Lahteine
b1abd7edef Optimize graphical display with selective rendering 2016-11-26 06:53:52 -06:00
AnHardt
b91fab2d7d Fix USE_BIG_EDIT_FONT 2016-11-26 13:50:25 +01:00
Scott Lahteine
4cd73e183d Hide hidden files and folders 2016-11-26 06:26:28 -06:00
Scott Lahteine
f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
AnHardt
75fdcc14b7 Activate font and mapper for el-gr 2016-11-26 02:30:37 +01:00
AnHardt
a0004e7cd3 Change font decent to -1 for tt and gr 
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
 2016-11-26 02:29:23 +01:00
Scott Lahteine
307f263f89 Merge pull request #5292 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-11-25 16:56:49 -06:00
esenapaj
7070143042 Update Japanese translation 
・Add new translation
 2016-11-24 21:10:40 +09:00
esenapaj
ef97645002 Follow-up the PR #5255 (Case light menu (3rd attempt)) 2016-11-24 19:42:05 +09:00
Scott Lahteine
2a9b3376a9 Merge pull request #5289 from thinkyhead/rc_which_menu_actions 
Drop "static" keyword in ultralcd.cpp function declarations
 2016-11-23 23:04:05 -06:00
Scott Lahteine
b97dafe4b8 Drop "static" keyword in ultralcd.cpp function declarations 2016-11-23 20:43:01 -06:00
Scott Lahteine
2e966f8e5b Patch Capabilities Report for "PROGRESS" 2016-11-23 19:31:46 -06:00
Scott Lahteine
f60321d3e3 Merge pull request #5284 from thinkyhead/rc_turkish_update 
Turkish update (squashed)
 2016-11-23 14:57:52 -06:00
Mehmet Sutas
a26668b10c Add UTF8 Turkish Translation 2016-11-23 14:19:16 -06:00
Mehmet Sutas
61aa796307 Added Human Readable Comments 2016-11-23 14:19:16 -06:00
Mehmet Sutas
6fb9c6fe07 Follow-up for #5167 Turkish Language 
Add check for Turkish Font before setting better font for graphic displays
 2016-11-23 14:19:15 -06:00
Scott Lahteine
d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix 
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
 2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu 
Case light menu (3rd attempt)
 2016-11-23 13:46:33 -06:00
Kai
e9b42f4f47 Update language_de.h 2016-11-23 19:29:19 +01:00
Kai
0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
Scott Lahteine
3bc2273ac9 Comment M540 2016-11-21 18:08:00 -06:00
Scott Lahteine
14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130 
TMC2130 "Silent StepStick" support
 2016-11-21 14:10:52 -06:00
Scott Lahteine
bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone 
Add an option for delta to home to the top
 2016-11-21 13:56:44 -06:00
Scott Lahteine
38466b1d2f Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267 
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
 2016-11-21 13:55:56 -06:00
Scott Lahteine
9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup 
Minor stepper cleanup
 2016-11-21 13:55:25 -06:00
Sebastianv650
8190483eeb Improvement for ENSURE_SMOOTH_MOVES 
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
 2016-11-21 17:58:24 +01:00
esenapaj
da67037550 Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm) 
・Fix memory leak
 2016-11-21 22:31:01 +09:00
Scott Lahteine
0f891e848b Merge pull request #5268 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-11-21 03:18:36 -06:00
esenapaj
190a04c467 Update Japanese translation 
・Change translation for 16 width LCD
 2016-11-21 17:51:43 +09:00
esenapaj
7b836a4000 Introduce a +1234.56 format for over 999 steps/mm 2016-11-21 17:45:07 +09:00
Scott Lahteine
3e0376b45e Reorder M114 and M119 gcode cases 2016-11-21 00:52:19 -06:00
Scott Lahteine
644fac5d34 Reduce all stepper_indirection init code with macros 2016-11-21 00:52:18 -06:00
Scott Lahteine
4e4f37b6c2 Code formatting for TMC and L6470 config options 2016-11-21 00:52:18 -06:00
Scott Lahteine
127e21ae00 Extend M122 for all steppers 2016-11-21 00:52:18 -06:00
Scott Lahteine
bf5f5f44cc Make TMC2130 init code auto-configure 
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
 2016-11-21 00:52:17 -06:00
Moritz
d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine
11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Sebastianv650
50059690e0 Allow UART ISRs inside the stepper ISR 
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.

With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
 2016-11-20 13:09:12 +01:00
Moshen Chan
29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
AnHardt
88b38eafd8 Endstop interrupt refinement 
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
 2016-11-19 13:30:49 +01:00
Scott Lahteine
79c8591192 Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax 
Ensure smooth print moves even with LCD enabled
 2016-11-19 01:38:41 -06:00
Scott Lahteine
0215cacb30 Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634 
Re-follow the PR #4634 (Set language display charset in language.h)
 2016-11-19 01:32:40 -06:00
Scott Lahteine
2cc32d85a3 Adjust ENSURE_SMOOTH_MOVES coding style 2016-11-19 01:28:48 -06:00
Scott Lahteine
072541f286 Update ENSURE_SMOOTH_MOVES in all configs 2016-11-19 01:28:47 -06:00
Sebastianv650
de89dc9f04 Ensure smooth print moves even with LCD enabled 
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.

This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
 2016-11-19 01:28:47 -06:00
Scott Lahteine
87b6b19256 Patch CASE_LIGHT typo 2016-11-18 23:49:12 -06:00
Scott Lahteine
0be6167f14 Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18 
K8200: Example configuration back in sync
 2016-11-18 22:49:18 -06:00
Scott Lahteine
eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine
181cdb3cfe Move GCode list above include lines 2016-11-18 22:24:46 -06:00
Scott Lahteine
25d0c167bd More detailed static_assert messages 2016-11-18 22:24:46 -06:00
Scott Lahteine
eb120e518c Followup to new endstop interrupts feature 
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
 2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts 
Introduce endstop interrupts
 2016-11-18 20:50:24 -06:00
CONSULitAS
cbae44df64 K8200: Example configuration back in sync 
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
 2016-11-18 22:55:02 +01:00
esenapaj
5db3738fe7 Re-follow the PR #4634 (Set language display charset in language.h) 2016-11-18 17:44:49 +09:00
Scott Lahteine
6eb6f12c64 Patch up some language formatting 2016-11-18 01:16:58 -06:00
Bo Herrmannsen
8cffa60cc5 Update to Danish language 10/11-2016 2016-11-18 01:16:57 -06:00
Scott Lahteine
98600e1433 Minor stepper cleanup 2016-11-18 01:15:57 -06:00
Florian Heilmann
d08867986e Add autotemp capabilities to M104 
This allows M104 to pass the F and B parameters to enable autotemp as well
 2016-11-17 11:28:19 -06:00
Sebastianv650
c11b2bb777 Bugfix LIN_ADV 
Advance has nothing todo with Z_AXIS, strange copy&paste error?
 2016-11-17 11:28:19 -06:00
Scott Lahteine
ee0765e872 Merge pull request #5233 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-11-17 03:38:19 -06:00
Scott Lahteine
2330619da0 Merge pull request #5191 from petrzjunior/const 
Replace const bool with #define for consistency
 2016-11-17 03:37:32 -06:00
esenapaj
b278b7a395 Update Japanese translation 
Only adjust spacing
 2016-11-17 09:05:51 +09:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
Scott Lahteine
d63230d73e Merge pull request #5192 from Kaibob2/patch-7 
Printer Stats / Completed prints line doesn't fit in display (when german)
 2016-11-16 00:16:36 -06:00
Scott Lahteine
548b45026d Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt 
Save some cycle inside the planner
 2016-11-16 00:06:55 -06:00
Scott Lahteine
5d23e52d75 Merge pull request #5228 from thinkyhead/rc_keep_last_mix 
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
 2016-11-15 19:12:01 -06:00
Scott Lahteine
db47aa983d Merge pull request #5226 from mtowara/RCBugFix 
bump -std in Makefile to c++11
 2016-11-15 16:13:32 -06:00
Scott Lahteine
99b0c1fe56 Fix DIRECT_MIXING_IN_G1 to preserve the previous mix 2016-11-15 16:12:26 -06:00
Markus Towara
23a675f621 reduce binary size of .hex 
still a few bytes bigger than with arduino but nothing major
 2016-11-15 21:57:15 +01:00
Markus Towara
5b6e2cecf5 bump c/c++ standard to gnu11 
needed for constexpr
 2016-11-15 21:54:12 +01:00
Scott Lahteine
410657b050 Fix G30 with limits, print correct probe XY 2016-11-15 14:10:28 -06:00
AnHardt
f3eee02596 Introduce endstop interrupts 
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
 2016-11-15 12:07:41 +01:00
Sebastianv650
e3ffb58fbd Save some cycle inside the planner 
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?

planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
 2016-11-13 13:34:12 +01:00
Scott Lahteine
665b7f3893 Merge pull request #5212 from thinkyhead/rc_mixing_faster 
Store mix factors as reciprocals and multiply
 2016-11-12 18:47:11 -06:00
Scott Lahteine
60cc9342a4 Merge pull request #5188 from thinkyhead/rc_extended_host_support 
Extended host support: M155 Auto temp report, M115 capabilities
 2016-11-12 15:38:06 -06:00
Scott Lahteine
f663220e87 Store Mix factors as reciprocals and multiply 2016-11-12 15:19:18 -06:00
Scott Lahteine
ea3c08d249 Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc 
Follow up the PR #5167 (Add Turkish Language) again, etc
 2016-11-12 13:11:54 -06:00
Scott Lahteine
c488378532 Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch 
Remove useless line from stepper ISR
 2016-11-12 12:43:07 -06:00
Michael Neumann
8bdf303da0 Update pins_MEGATRONICS_3.h 2016-11-12 12:26:07 +01:00
Michael Neumann
3890366c83 Update pins.h 2016-11-12 12:25:45 +01:00
Michael Neumann
c0d45ca7f2 Update boards.h 2016-11-12 12:24:47 +01:00
Sebastianv650
cdc18f8c22 Remove useless line from stepper ISR 
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
 2016-11-11 19:35:03 +01:00
Kai
8e8b4398f3 Printer Stats / Completed prints line doesn't fit in display (when german) 2016-11-09 22:03:25 +01:00
Scott Lahteine
b31a07e261 Stateful M355 with separate P parameter 2016-11-09 03:28:18 -06:00
Scott Lahteine
3c9a838651 Extended capabilities report in M115 2016-11-09 02:32:58 -06:00
Scott Lahteine
68b866b5dd Add M155 - Auto-report temperature with interval 2016-11-09 02:32:58 -06:00
Scott Lahteine
68b46fb2c9 Allow send to i2c address 0 (broadcast) 2016-11-08 17:54:55 -06:00
Scott Lahteine
75bfde9945 M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
esenapaj
2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc 
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
 2016-11-09 06:31:21 +09:00
Scott Lahteine
06f2282f82 Merge pull request #5176 from thinkyhead/rc_filchange_feedback 
Give instant feedback for filament change
 2016-11-07 12:11:54 -06:00
Scott Lahteine
dcfd7c69e8 Merge pull request #5163 from nzinov/RCBugFix 
Improve G30 probing command - add optional arguments
 2016-11-07 11:37:13 -06:00
Scott Lahteine
e765eebfb0 Patch spacing in bilinear grid report 2016-11-07 04:08:25 -06:00
Scott Lahteine
7780052fb3 Give instant feedback for filament change 2016-11-07 03:48:16 -06:00
esenapaj
24e3f7abe7 Update Turkish translation 
・Add new translation
 2016-11-07 04:59:18 +09:00
esenapaj
be48792e9c Follow up the PR #5167 (Add Turkish Language), etc 
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
 2016-11-06 23:59:02 +09:00
Scott Lahteine
1864b282c5 Implement reversed CORE options 2016-11-05 23:47:51 -05:00
Scott Lahteine
e3c8318504 Add reversed CORE options 2016-11-05 23:47:46 -05:00
Rigid3D
2327764980 Add Turkish Language 2016-11-05 21:06:16 -05:00
Nikolay Zinov
dea00bbcf1 improve G30 probing 
Add optional parameters
X, Y for probe point
S sets stowing on and off
 2016-11-05 13:22:45 +03:00
Scott Lahteine
00662b8635 Minor babystep cleanup patches 2016-11-03 23:31:45 -05:00
Scott Lahteine
cad792e702 Reduce code for invariant lcd_detected 2016-11-03 23:31:45 -05:00
Scott Lahteine
b23d255491 Move macros above Stepper::babystep 2016-11-03 23:31:45 -05:00
Scott Lahteine
cc57d46158 Fix set_position for CoreYZ 2016-11-03 23:31:45 -05:00
Scott Lahteine
0269347682 Merge pull request #5141 from thinkyhead/rc_old_slowdown_what 
OLD_SLOWDOWN does nothing, so remove it
 2016-11-03 23:30:43 -05:00
Scott Lahteine
e92e2b2446 Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe 
Account for wipe moves
 2016-11-03 23:19:25 -05:00
Scott Lahteine
176aeafc19 Don't define bilinear_line_to_destination on kinematic setups 2016-11-03 14:10:07 -05:00
Sebastianv650
d448500643 Account for moves with negative E movements 
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
 2016-11-03 17:01:17 +01:00
Scott Lahteine
236853df22 Corrections to bilinear_line_to_destination 
- Allow more than 9x9 probe points
- Account for the probe starting position
 2016-11-03 04:43:59 -05:00
Scott Lahteine
0115e495fe Fix up Dual X switch blocks 2016-11-02 21:38:50 -05:00
Scott Lahteine
2495ab7af2 Make dual_x_carriage_mode an enumeration 2016-11-02 21:38:49 -05:00
Scott Lahteine
d6c36f5bb9 Fix Z raise with DXC_AUTO_PARK_MODE 2016-11-02 21:36:50 -05:00
Scott Lahteine
0c79553fc5 Cast int to AxisEnum for some accessors 2016-11-02 17:42:24 -05:00
Scott Lahteine
adbf1f7dca Add M355 to the GCodes list. 2016-11-02 16:43:52 -05:00
Scott Lahteine
63efc10599 Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines 
Split cartesian moves on grid boundaries with bilinear ABL
 2016-11-02 16:14:55 -05:00
Scott Lahteine
12167bc8f3 OLD_SLOWDOWN does nothing, so remove it 2016-11-02 01:28:19 -05:00
esenapaj
c8c1a28f6f Follow-up the PR #5089 (Centralize click-handling in the LCD loop) 
bool feedback is no longer used
 2016-11-02 08:36:02 +09:00
esenapaj
c3a105186d Follow-up the PR #5133 (M355 Case light) 
・Add CASE_LIGHT_PIN into pinsDebug.h
 2016-11-02 00:31:50 +09:00
Scott Lahteine
ee5b8d6dc8 Split moves on grid boundaries with bilinear ABL on cartesian 2016-11-01 08:25:47 -05:00
Scott Lahteine
66744a6076 Merge pull request #5133 from thinkyhead/rc_M355_case_light 
M355 Case light
 2016-11-01 07:51:27 -05:00
Scott Lahteine
955d14acb0 Patch photo pin code style 2016-11-01 06:30:14 -05:00
Stanley
ab3f966f5f Case light G-code M355 
implemented G-Code M355 into Marlin
 2016-11-01 06:30:14 -05:00
Scott Lahteine
8b44413498 Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch 
BugFix for incorrect E-speed calculation
 2016-11-01 05:13:17 -05:00
Scott Lahteine
f418e82b15 Remove redundant definition of EN_C 2016-11-01 05:10:07 -05:00
Sebastianv650
f9bea7968f BugFix for incorrect E-speed calculation 
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
 2016-11-01 08:08:47 +01:00
Bob-the-Kuhn
c20b4098be 2 bug fixes & some minor changes 
see detailed  description in PR #5118
 2016-11-01 01:29:41 -05:00
Scott Lahteine
fa6bf12697 Merge pull request #5118 from thinkyhead/rc_expanded_M43 
Enhancements to M43 pins debugging
 2016-10-31 08:29:53 -05:00
Scott Lahteine
3a107e280d Developer note in pins_MIGHTYBOARD_REVE.h 2016-10-31 08:22:39 -05:00
Scott Lahteine
85e307dcd8 No FAN0_PIN 2016-10-31 08:08:03 -05:00
Scott Lahteine
ff3a8ca0d1 Use NUM_DIGITAL_PINS instead of custom DIO_COUNT 2016-10-31 08:08:03 -05:00
Scott Lahteine
04a1fac029 Some cleanup to M43 2016-10-31 08:08:03 -05:00
Scott Lahteine
24f6612551 Reduce and optimize endstop_monitor code 2016-10-31 08:08:03 -05:00
Scott Lahteine
b4444e91ae Reduce code and build size of PWM_details 2016-10-31 08:08:02 -05:00
Scott Lahteine
dbe414ef03 Squash redundant code in PWM_status 2016-10-31 08:08:02 -05:00
Scott Lahteine
af26d22741 Clean up some spacing and semantics 2016-10-31 08:08:02 -05:00
Bob-the-Kuhn
81397d7a9a EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN 
I stumbled across a name change that'll be used a lot so I'm updateing
the name list.
 2016-10-31 08:08:02 -05:00
Bob-the-Kuhn
c7f1f0dae6 Add endstop monitor & make pins report pretty 2016-10-31 08:08:02 -05:00
Scott Lahteine
d567b426d5 Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e 
Mightyboard Revision E preliminary support
 2016-10-31 08:01:41 -05:00
Scott Lahteine
43df9ace4e Merge pull request #5110 from thinkyhead/rc_z2_min_allowed 
Support Z2 min in M119 report
 2016-10-31 07:59:45 -05:00
Scott Lahteine
23f05f8be7 Use bit-length types in block_t 2016-10-30 16:16:29 -05:00
Scott Lahteine
8dc7807d85 Add support for CoreYZ to planner.buffer_line 2016-10-30 16:16:28 -05:00
Scott Lahteine
1cf878fdb1 Calculate dm and e-steps earlier in planner 2016-10-30 16:16:28 -05:00
Scott Lahteine
75dbb71dd7 Replace block.busy with a block.flag bit 2016-10-30 16:16:28 -05:00
Scott Lahteine
c7f22f688f buffer_line can calculate while it's waiting 2016-10-29 17:08:42 -05:00
Scott Lahteine
f3720f4e81 const arguments to test_dual_z_endstops 2016-10-29 16:01:27 -05:00
Scott Lahteine
8cebd2a7db Arrange Z2 min before Z2 max 2016-10-29 01:54:19 -05:00
Scott Lahteine
accabf088a Add support for Z2 min endstop to M119 2016-10-29 01:54:02 -05:00
Scott Lahteine
396434a445 Fix compiler warning in M145 2016-10-28 20:57:36 -05:00
Scott Lahteine
8e787304c9 const float ref args in planner.h 2016-10-28 20:57:36 -05:00
Scott Lahteine
07bfc45df8 Adjust spacing in gcode_M149 2016-10-28 20:57:36 -05:00
Scott Lahteine
1a2310c494 Make LCD preheat vars an array to reduce code size 2016-10-28 20:57:36 -05:00
Scott Lahteine
1226ae1912 Some cleanup in ultralcd.h 2016-10-28 20:57:21 -05:00
Scott Lahteine
50ee749082 Centralize click-handling in the LCD loop 2016-10-28 20:57:21 -05:00
Scott Lahteine
47ad97c35e Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset 
Save hotend_offset array (M218) in EEPROM
 2016-10-28 20:08:29 -05:00
Scott Lahteine
bff6bbdb12 Indentation in configuration_store.cpp 2016-10-28 18:55:42 -05:00
Scott Lahteine
97115d56f9 Print error for M500 with disabled EEPROM 2016-10-28 18:53:48 -05:00
Scott Lahteine
67ab54185b Save hotend_offset array (M218) in EEPROM 2016-10-28 18:45:23 -05:00
MagoKimbra
dfcdbb437b Fix Command M420 2016-10-28 20:53:48 +02:00
Scott Lahteine
c34dbfb248 Merge pull request #5072 from thinkyhead/rc_preset_auto_fans 
Add predefined AUTO_FAN_PINs to pins files
 2016-10-27 17:12:11 -05:00
Scott Lahteine
9a23f73765 Don't trigger endstops that are actually Z2 or probe 2016-10-27 08:12:17 -05:00
Scott Lahteine
c07cc9e3f1 Revert changes made to z dual endstop test 
#3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248
 2016-10-27 07:41:39 -05:00
Scott Lahteine
c4c53856a4 Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088 
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
 2016-10-26 21:51:18 -05:00
Scott Lahteine
2e3110539b Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math 
Fix bilinear grid constraints
 2016-10-26 21:48:19 -05:00
esenapaj
d5a5042d23 Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL) 2016-10-27 10:32:20 +09:00
Scott Lahteine
9cbedab91b Use DPM where possible 2016-10-26 18:38:32 -05:00
Scott Lahteine
ad38d91692 Sanity check that auto fan pins can do PWM 2016-10-26 18:38:32 -05:00
Scott Lahteine
95275eb9b3 Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
Scott Lahteine
3f94b15cef Fix bilinear grid constraints 
Followup to #5090
 2016-10-26 18:11:26 -05:00
Scott Lahteine
d439fb95f7 Sanity check for the renamed options 2016-10-26 17:51:26 -05:00
Scott Lahteine
b6aa894893 Rename auto fan pins and add auto fan flags 2016-10-26 17:51:26 -05:00
Scott Lahteine
ada935de87 Allow TEMP_STAT_LEDS with only one LED defined 2016-10-26 17:51:26 -05:00
Scott Lahteine
4b056d8184 Fix warning in ultralcd.cpp 2016-10-26 17:51:26 -05:00
Scott Lahteine
9dfd029911 Fix bug in fastio.h _GET_TIMER 2016-10-26 17:51:25 -05:00
esenapaj
8b1d90e281 Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc 
・Add header
・Adjust spacing
 2016-10-27 06:46:03 +09:00
Scott Lahteine
bfd3b3c604 Merge pull request #5087 from Fulg/azteeg-x3-pins 
Fixed SERVO pins on Azteeg X3
 2016-10-26 06:01:16 -05:00
Scott Lahteine
208d720614 Merge pull request #5082 from Fulg/RCBugFix 
Only issue MAXTEMP when heating
 2016-10-26 05:55:33 -05:00
Scott Lahteine
f0d673561f Fix for bilinear grid outside bounds 2016-10-26 05:00:03 -05:00
Scott Lahteine
24bcea6c02 Merge pull request #5088 from thinkyhead/rc_break_m1_fix 
Handle M108 in M1 also with ULTIPANEL
 2016-10-26 00:44:01 -05:00
Scott Lahteine
1ba1ec0db9 Handle M108 in M1 also with ULTIPANEL 2016-10-25 23:25:47 -05:00
Scott Lahteine
7ad33422e3 Clear dir_t size, not pointer size 2016-10-25 22:59:40 -05:00
Benoit Miller
1c716034ec Fixed SERVO pins on Azteeg X3 2016-10-25 17:11:26 -04:00
Benoit Miller
2aa12d78dc Only issue MAXTEMP when heating 2016-10-24 17:09:29 -04:00
Scott Lahteine
3fcf915808 Fix uninitialized var in reset_acceleration_rates 2016-10-24 11:55:41 -05:00
Scott Lahteine
14f824c3de Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple 
Extend measuring range of thermocouple for MAX31855
 2016-10-24 02:00:12 -05:00
Scott Lahteine
1097a50694 Merge pull request #5070 from gcormier/rcbugfix 
Fix #4995 - M48/G29 on CoreXY maybe others?
 2016-10-24 00:56:36 -05:00
Sebastianv650
c397b9d60a Planner acceleration bugfix and speedup v2 
.) Use already existing inverse_millimeters instead of /
block->millimeters.
.) Prevent overflow during acceleration calculation by checking if float
is necessary. Idea modified from Sailfish.
.) Save two uint32_t or even float multiplications by checking if
step[AXIS] has steps and if max acceleration is lower than accel. If
not, there is no need to check this axis.
 2016-10-23 12:47:46 +02:00
esenapaj
70e287ca8c Extend measuring range of thermocouple for MAX31855 2016-10-23 10:22:39 +09:00
Greg Cormier
f0aed9dac7 Fix #4995 - M48/G29 on CoreXY maybe others? 2016-10-22 20:45:13 -04:00
esenapaj
e50992694f Fix for the PR #5066 (Updated french translation) 
MSG_INFO_PRINT_TIME is still being used
 2016-10-23 06:09:56 +09:00
Scott Lahteine
483082387c Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553 
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
 2016-10-22 13:54:09 -05:00
Scott Lahteine
8b967a9ff0 Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons 
Apply encoder reverse options to keypad arrows
 2016-10-22 13:52:35 -05:00
esenapaj
523c7eaa6c Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD)) 2016-10-23 03:29:00 +09:00
Scott Lahteine
ca48a49fdb Merge pull request #5065 from petrzjunior/transl 
[LANGUAGE] Update Czech (BLTOUCH and DAC strings)
 2016-10-22 12:46:10 -05:00
Scott Lahteine
f0744fc815 Merge pull request #5066 from thinkyhead/rc_french_update 
Updated french translation
 2016-10-22 12:45:51 -05:00
Gege2B
88b7f6eb46 Updated french translation 2016-10-22 12:30:22 -05:00
Scott Lahteine
3544c3632f Merge pull request #5062 from thinkyhead/rc_warnings_fix 
Warnings fixed redux
 2016-10-22 12:21:36 -05:00
Petr Zahradník junior
8323d78ed7 Translated BLTOUCH and DAC strings 2016-10-22 19:12:21 +02:00
Scott Lahteine
e151f952a3 Apply encoder reverse options to keypad arrows 2016-10-22 11:51:33 -05:00
Scott Lahteine
cfb47929ca Merge pull request #5060 from thinkyhead/rc_fix_ugly_code 
Reduce, clean up MINTEMP / MAXTEMP test code
 2016-10-22 11:27:30 -05:00
Josef Pavlik
dca50737f5 fixed warning: ISO C++ forbids compound-literals 2016-10-22 11:23:16 -05:00
Josef Pavlik
0bd66807b2 fixed warning: extra ; 2016-10-22 11:12:29 -05:00
Josef Pavlik
d35dc407a8 fixed warning: ISO C99 requires rest arguments to be used 2016-10-22 11:12:29 -05:00
Josef Pavlik
c2b51af3ba fixed warning: ISO C does not permit named variadic macros 2016-10-22 11:12:29 -05:00
Scott Lahteine
0d3fc7dd89 Merge pull request #5059 from gcormier/fixbaby 
Set defer delay back to false when exiting babystepping.
 2016-10-22 10:59:17 -05:00
Scott Lahteine
f888597197 Reduce, clean up code for mintemp/maxtemp tests 2016-10-22 10:31:03 -05:00
Scott Lahteine
ad64723354 Move MAX_EXTRUDERS to pins.h 2016-10-22 10:07:51 -05:00
Scott Lahteine
5f5a55a0de Add a ZERO macro to clear arrays 2016-10-22 10:07:18 -05:00
Greg Cormier
0009725637 Set defer delay back to false when exiting babystepping. 2016-10-22 09:43:30 -04:00
Scott Lahteine
627f9d5285 Merge pull request #5056 from thinkyhead/rc_lin_adv_opt 
LIN_ADVANCE optimizations
 2016-10-22 07:06:39 -05:00
Scott Lahteine
0908329d96 Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical 
Fix manual leveling coordinates
 2016-10-22 06:31:02 -05:00
Scott Lahteine
14e60f0d3b Correct typo in configs 
As pointed out by #5044
 2016-10-22 05:56:32 -05:00
Scott Lahteine
1165e83263 MBL coordinates are logical 2016-10-22 05:55:44 -05:00
Scott Lahteine
dbfabb4c0a Merge pull request #5043 from Kaibob2/patch-5 
Correct grammar and translation in language_de.h
 2016-10-22 05:52:54 -05:00
Scott Lahteine
b19bba275f No LCD timeout during babystepping 
As requested in #5031
 2016-10-22 05:26:07 -05:00
Scott Lahteine
b9109b2875 Improve LIN_ADVANCE commentary (all configs) 2016-10-22 05:03:09 -05:00
Sebastianv650
9818d97587 Fix Z-hops during retract/prime lead to blobs 
We don't want to have retract/prime movements done with LIN_ADVANCE, that's also true with simultaneously executed Z-hops.
 2016-10-22 04:54:59 -05:00
Sebastianv650
599649e45d Add formula for LIN_ADVANCE_K 
With this formula, a start value for K for further fine-calibration can be calculated.
 2016-10-22 04:54:59 -05:00
Scott Lahteine
be7d245eff Merge pull request #5008 from thinkyhead/test_endstop_hits 
Save some PROGMEM in MBL G28
 2016-10-22 03:35:52 -05:00
Scott Lahteine
7c0e52256d Merge pull request #5053 from thinkyhead/rc_fix_baud_config 
Patch BAUDRATE line in configs
 2016-10-22 03:27:45 -05:00
Scott Lahteine
2783dcb4cc Save some RAM in MBL's G29 2016-10-22 02:52:56 -05:00