melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Move literal strings to language files

Browse Source
2.0.x
Scott Lahteine 10 years ago
parent aa9c1f1bed
commit fd1ea9d56f
3 changed files with 109 additions and 53 deletions
Show Stats Download Patch File Download Diff File

37
Marlin/language.h
Unescape Escape View File

@ -159,6 +159,43 @@
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!" #define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
// temperature.cpp strings
#define MSG_PID_AUTOTUNE "PID Autotune"
#define MSG_PID_AUTOTUNE_START MSG_PID_AUTOTUNE " start"
#define MSG_PID_AUTOTUNE_FAILED MSG_PID_AUTOTUNE " failed!"
#define MSG_PID_BAD_EXTRUDER_NUM MSG_PID_AUTOTUNE_FAILED " Bad extruder number"
#define MSG_PID_TEMP_TOO_HIGH MSG_PID_AUTOTUNE_FAILED " Temperature too high"
#define MSG_PID_TIMEOUT MSG_PID_AUTOTUNE_FAILED " timeout"
#define MSG_BIAS " bias: "
#define MSG_D " d: "
#define MSG_MIN " min: "
#define MSG_MAX " max: "
#define MSG_KU " Ku: "
#define MSG_TU " Tu: "
#define MSG_CLASSIC_PID " Classic PID "
#define MSG_KP " Kp: "
#define MSG_KI " Ki: "
#define MSG_KD " Kd: "
#define MSG_OK_B "ok B:"
#define MSG_OK_T "ok T:"
#define MSG_AT " @:"
#define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"
#define MSG_PID_DEBUG " PID_DEBUG "
#define MSG_PID_DEBUG_INPUT ": Input "
#define MSG_PID_DEBUG_OUTPUT " Output "
#define MSG_PID_DEBUG_PTERM " pTerm "
#define MSG_PID_DEBUG_ITERM " iTerm "
#define MSG_PID_DEBUG_DTERM " dTerm "
#define MSG_HEATING_FAILED "Heating failed"
#define MSG_EXTRUDER_SWITCHED_OFF "Extruder switched off. Temperature difference between temp sensors is too high !"
#define MSG_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
#define MSG_THERMAL_RUNAWAY_STOP "Thermal Runaway, system stopped! Heater_ID: "
#define MSG_SWITCHED_OFF_MAX " switched off. MAXTEMP triggered !!"
#define MSG_MINTEMP_EXTRUDER_OFF ": Extruder switched off. MINTEMP triggered !"
#define MSG_MAXTEMP_EXTRUDER_OFF ": Extruder" MSG_SWITCHED_OFF_MAX
#define MSG_MAXTEMP_BED_OFF "Heated bed" MSG_SWITCHED_OFF_MAX
// LCD Menu Messages // LCD Menu Messages
// Add your own character. Reference: https://github.com/MarlinFirmware/Marlin/pull/1434 photos // Add your own character. Reference: https://github.com/MarlinFirmware/Marlin/pull/1434 photos

18
Marlin/language_en.h
Unescape Escape View File

@ -383,6 +383,24 @@
#ifndef MSG_ENDSTOP_ABORT #ifndef MSG_ENDSTOP_ABORT
#define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_ENDSTOP_ABORT "Endstop abort"
#endif #endif
#ifndef MSG_HEATING_FAILED_LCD
#define MSG_HEATING_FAILED_LCD "Heating failed"
#endif
#ifndef MSG_ERR_REDUNDANT_TEMP
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP ERROR"
#endif
#ifndef MSG_THERMAL_RUNAWAY
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
#endif
#ifndef MSG_ERR_MAXTEMP
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
#endif
#ifndef MSG_ERR_MINTEMP
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#endif
#ifndef MSG_ERR_MAXTEMP_BED
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#endif
#ifdef DELTA_CALIBRATION_MENU #ifdef DELTA_CALIBRATION_MENU
#ifndef MSG_DELTA_CALIBRATE #ifndef MSG_DELTA_CALIBRATE

75
Marlin/temperature.cpp
Unescape Escape View File

@ -33,6 +33,7 @@
#include "ultralcd.h" #include "ultralcd.h"
#include "temperature.h" #include "temperature.h"
#include "watchdog.h" #include "watchdog.h"
#include "language.h"
#include "Sd2PinMap.h" #include "Sd2PinMap.h"
@ -228,11 +229,11 @@ void PID_autotune(float temp, int extruder, int ncycles)
|| extruder < 0 || extruder < 0
#endif #endif
) { ) {
SERIAL_ECHOLN("PID Autotune failed. Bad extruder number."); SERIAL_ECHOLN(MSG_PID_BAD_EXTRUDER_NUM);
return; return;
} }
SERIAL_ECHOLN("PID Autotune start"); SERIAL_ECHOLN(MSG_PID_AUTOTUNE_START);
disable_heater(); // switch off all heaters. disable_heater(); // switch off all heaters.
@ -287,22 +288,22 @@ void PID_autotune(float temp, int extruder, int ncycles)
bias = constrain(bias, 20, max_pow - 20); bias = constrain(bias, 20, max_pow - 20);
d = (bias > max_pow / 2) ? max_pow - 1 - bias : bias; d = (bias > max_pow / 2) ? max_pow - 1 - bias : bias;
SERIAL_PROTOCOLPGM(" bias: "); SERIAL_PROTOCOL(bias); SERIAL_PROTOCOLPGM(MSG_BIAS); SERIAL_PROTOCOL(bias);
SERIAL_PROTOCOLPGM(" d: "); SERIAL_PROTOCOL(d); SERIAL_PROTOCOLPGM(MSG_D); SERIAL_PROTOCOL(d);
SERIAL_PROTOCOLPGM(" min: "); SERIAL_PROTOCOL(min); SERIAL_PROTOCOLPGM(MSG_MIN); SERIAL_PROTOCOL(min);
SERIAL_PROTOCOLPGM(" max: "); SERIAL_PROTOCOLLN(max); SERIAL_PROTOCOLPGM(MSG_MAX); SERIAL_PROTOCOLLN(max);
if (cycles > 2) { if (cycles > 2) {
Ku = (4.0 * d) / (3.14159265 * (max - min) / 2.0); Ku = (4.0 * d) / (3.14159265 * (max - min) / 2.0);
Tu = ((float)(t_low + t_high) / 1000.0); Tu = ((float)(t_low + t_high) / 1000.0);
SERIAL_PROTOCOLPGM(" Ku: "); SERIAL_PROTOCOL(Ku); SERIAL_PROTOCOLPGM(MSG_KU); SERIAL_PROTOCOL(Ku);
SERIAL_PROTOCOLPGM(" Tu: "); SERIAL_PROTOCOLLN(Tu); SERIAL_PROTOCOLPGM(MSG_TU); SERIAL_PROTOCOLLN(Tu);
Kp = 0.6 * Ku; Kp = 0.6 * Ku;
Ki = 2 * Kp / Tu; Ki = 2 * Kp / Tu;
Kd = Kp * Tu / 8; Kd = Kp * Tu / 8;
SERIAL_PROTOCOLLNPGM(" Classic PID "); SERIAL_PROTOCOLLNPGM(MSG_CLASSIC_PID);
SERIAL_PROTOCOLPGM(" Kp: "); SERIAL_PROTOCOLLN(Kp); SERIAL_PROTOCOLPGM(MSG_KP); SERIAL_PROTOCOLLN(Kp);
SERIAL_PROTOCOLPGM(" Ki: "); SERIAL_PROTOCOLLN(Ki); SERIAL_PROTOCOLPGM(MSG_KI); SERIAL_PROTOCOLLN(Ki);
SERIAL_PROTOCOLPGM(" Kd: "); SERIAL_PROTOCOLLN(Kd); SERIAL_PROTOCOLPGM(MSG_KD); SERIAL_PROTOCOLLN(Kd);
/* /*
Kp = 0.33*Ku; Kp = 0.33*Ku;
Ki = Kp/Tu; Ki = Kp/Tu;
@ -331,7 +332,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
} }
} }
if (input > temp + 20) { if (input > temp + 20) {
SERIAL_PROTOCOLLNPGM("PID Autotune failed! Temperature too high"); SERIAL_PROTOCOLLNPGM(MSG_PID_TEMP_TOO_HIGH);
return; return;
} }
// Every 2 seconds... // Every 2 seconds...
@ -339,26 +340,26 @@ void PID_autotune(float temp, int extruder, int ncycles)
int p; int p;
if (extruder < 0) { if (extruder < 0) {
p = soft_pwm_bed; p = soft_pwm_bed;
SERIAL_PROTOCOLPGM("ok B:"); SERIAL_PROTOCOLPGM(MSG_OK_B);
} }
else { else {
p = soft_pwm[extruder]; p = soft_pwm[extruder];
SERIAL_PROTOCOLPGM("ok T:"); SERIAL_PROTOCOLPGM(MSG_OK_T);
} }
SERIAL_PROTOCOL(input); SERIAL_PROTOCOL(input);
SERIAL_PROTOCOLPGM(" @:"); SERIAL_PROTOCOLPGM(MSG_AT);
SERIAL_PROTOCOLLN(p); SERIAL_PROTOCOLLN(p);
temp_millis = ms; temp_millis = ms;
} // every 2 seconds } // every 2 seconds
// Over 2 minutes? // Over 2 minutes?
if (((ms - t1) + (ms - t2)) > (10L*60L*1000L*2L)) { if (((ms - t1) + (ms - t2)) > (10L*60L*1000L*2L)) {
SERIAL_PROTOCOLLNPGM("PID Autotune failed! timeout"); SERIAL_PROTOCOLLNPGM(MSG_PID_TIMEOUT);
return; return;
} }
if (cycles > ncycles) { if (cycles > ncycles) {
SERIAL_PROTOCOLLNPGM("PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"); SERIAL_PROTOCOLLNPGM(MSG_PID_AUTOTUNE_FINISHED);
return; return;
} }
lcd_update(); lcd_update();
@ -571,17 +572,17 @@ void manage_heater() {
#ifdef PID_DEBUG #ifdef PID_DEBUG
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHO(" PID_DEBUG "); SERIAL_ECHO(MSG_PID_DEBUG);
SERIAL_ECHO(e); SERIAL_ECHO(e);
SERIAL_ECHO(": Input "); SERIAL_ECHO(MSG_PID_DEBUG_INPUT);
SERIAL_ECHO(pid_input); SERIAL_ECHO(pid_input);
SERIAL_ECHO(" Output "); SERIAL_ECHO(MSG_PID_DEBUG_OUTPUT);
SERIAL_ECHO(pid_output); SERIAL_ECHO(pid_output);
SERIAL_ECHO(" pTerm "); SERIAL_ECHO(MSG_PID_DEBUG_PTERM);
SERIAL_ECHO(pTerm[e]); SERIAL_ECHO(pTerm[e]);
SERIAL_ECHO(" iTerm "); SERIAL_ECHO(MSG_PID_DEBUG_ITERM);
SERIAL_ECHO(iTerm[e]); SERIAL_ECHO(iTerm[e]);
SERIAL_ECHO(" dTerm "); SERIAL_ECHO(MSG_PID_DEBUG_DTERM);
SERIAL_ECHOLN(dTerm[e]); SERIAL_ECHOLN(dTerm[e]);
#endif //PID_DEBUG #endif //PID_DEBUG
@ -599,9 +600,9 @@ void manage_heater() {
if (watchmillis[e] && ms > watchmillis[e] + WATCH_TEMP_PERIOD) { if (watchmillis[e] && ms > watchmillis[e] + WATCH_TEMP_PERIOD) {
if (degHotend(e) < watch_start_temp[e] + WATCH_TEMP_INCREASE) { if (degHotend(e) < watch_start_temp[e] + WATCH_TEMP_INCREASE) {
setTargetHotend(0, e); setTargetHotend(0, e);
LCD_MESSAGEPGM("Heating failed"); LCD_MESSAGEPGM(MSG_HEATING_FAILED_LCD); // translatable
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Heating failed"); SERIAL_ECHOLNPGM(MSG_HEATING_FAILED);
} }
else { else {
watchmillis[e] = 0; watchmillis[e] = 0;
@ -614,8 +615,8 @@ void manage_heater() {
disable_heater(); disable_heater();
if (IsStopped() == false) { if (IsStopped() == false) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Extruder switched off. Temperature difference between temp sensors is too high !"); SERIAL_ERRORLNPGM(MSG_EXTRUDER_SWITCHED_OFF);
LCD_ALERTMESSAGEPGM("Err: REDUNDANT TEMP ERROR"); LCD_ALERTMESSAGEPGM(MSG_ERR_REDUNDANT_TEMP); // translatable
} }
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
Stop(); Stop();
@ -728,7 +729,7 @@ static float analog2temp(int raw, uint8_t e) {
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERROR((int)e); SERIAL_ERROR((int)e);
SERIAL_ERRORLNPGM(" - Invalid extruder number !"); SERIAL_ERRORLNPGM(MSG_INVALID_EXTRUDER_NUM);
kill(); kill();
return 0.0; return 0.0;
} }
@ -1074,9 +1075,9 @@ void thermal_runaway_protection(int *state, unsigned long *timer, float temperat
else if ( (ms - *timer) > ((unsigned long) period_seconds) * 1000) else if ( (ms - *timer) > ((unsigned long) period_seconds) * 1000)
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Thermal Runaway, system stopped! Heater_ID: "); SERIAL_ERRORLNPGM(MSG_THERMAL_RUNAWAY_STOP);
SERIAL_ERRORLN((int)heater_id); SERIAL_ERRORLN((int)heater_id);
LCD_ALERTMESSAGEPGM("THERMAL RUNAWAY"); LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY); // translatable
thermal_runaway = true; thermal_runaway = true;
while(1) while(1)
{ {
@ -1140,8 +1141,8 @@ void max_temp_error(uint8_t e) {
if(IsStopped() == false) { if(IsStopped() == false) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLN((int)e); SERIAL_ERRORLN((int)e);
SERIAL_ERRORLNPGM(": Extruder switched off. MAXTEMP triggered !"); SERIAL_ERRORLNPGM(MSG_MAXTEMP_EXTRUDER_OFF);
LCD_ALERTMESSAGEPGM("Err: MAXTEMP"); LCD_ALERTMESSAGEPGM(MSG_ERR_MAXTEMP); // translatable
} }
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
Stop(); Stop();
@ -1153,8 +1154,8 @@ void min_temp_error(uint8_t e) {
if(IsStopped() == false) { if(IsStopped() == false) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLN((int)e); SERIAL_ERRORLN((int)e);
SERIAL_ERRORLNPGM(": Extruder switched off. MINTEMP triggered !"); SERIAL_ERRORLNPGM(MSG_MINTEMP_EXTRUDER_OFF);
LCD_ALERTMESSAGEPGM("Err: MINTEMP"); LCD_ALERTMESSAGEPGM(MSG_ERR_MINTEMP); // translatable
} }
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
Stop(); Stop();
@ -1167,8 +1168,8 @@ void bed_max_temp_error(void) {
#endif #endif
if (IsStopped() == false) { if (IsStopped() == false) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!"); SERIAL_ERRORLNPGM(MSG_MAXTEMP_BED_OFF);
LCD_ALERTMESSAGEPGM("Err: MAXTEMP BED"); LCD_ALERTMESSAGEPGM(MSG_ERR_MAXTEMP_BED); // translatable
} }
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
Stop(); Stop();

Write Preview
Loading…
Cancel
Save