From f7127c44f88ea7917050b0149f204b8bf0d9bad3 Mon Sep 17 00:00:00 2001 From: Ludy Date: Fri, 21 Dec 2018 00:30:36 +0100 Subject: [PATCH] Wanhao Duplicator i3 Plus pins create (#12701) --- Marlin/src/core/boards.h | 2 + Marlin/src/pins/pins.h | 4 +- Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h | 183 ++++++++++++++++++++++ Marlin/src/pins/pins_MEGATRONICS_3.h | 8 +- 4 files changed, 193 insertions(+), 4 deletions(-) create mode 100644 Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index a01e463b41..a2f5c5d595 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -85,6 +85,7 @@ #define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8 #define BOARD_RAMPS_CREALITY 244 // Creality: CR10S, CR20, CR-X #define BOARD_FYSETC_F6_13 541 // Fysetc F6 +#define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus // // Other ATmega1280, ATmega2560 @@ -99,6 +100,7 @@ #define BOARD_MEGATRONICS_2 701 // Megatronics v2.0 #define BOARD_MEGATRONICS_3 703 // Megatronics v3.0 #define BOARD_MEGATRONICS_31 704 // Megatronics v3.1 +#define BOARD_MEGATRONICS_32 705 // Megatronics v3.2 #define BOARD_RAMBO 301 // Rambo #define BOARD_MINIRAMBO 302 // Mini-Rambo #define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 75f5e7bf12..bdc0d34d1e 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -156,6 +156,8 @@ #include "pins_RAMPS_CREALITY.h" // ATmega2560 env:megaatmega2560 #elif MB(FYSETC_F6_13) #include "pins_FYSETC_F6_13.h" // ATmega2560 env:megaatmega2560 +#elif MB(DUPLICATOR_I3_PLUS) + #include "pins_DUPLICATOR_I3_PLUS.h" // ATmega2560 env:megaatmega2560 // // Other ATmega1280, ATmega2560 @@ -175,7 +177,7 @@ #include "pins_MEGATRONICS.h" // ATmega2560 env:megaatmega2560 #elif MB(MEGATRONICS_2) #include "pins_MEGATRONICS_2.h" // ATmega2560 env:megaatmega2560 -#elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31) +#elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31) || MB(MEGATRONICS_32) #include "pins_MEGATRONICS_3.h" // ATmega2560 env:megaatmega2560 #elif MB(RAMBO) #include "pins_RAMBO.h" // ATmega2560 env:rambo diff --git a/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h new file mode 100644 index 0000000000..db22944646 --- /dev/null +++ b/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h @@ -0,0 +1,183 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Wanhao Duplicator i3 Plus pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_NAME "Duplicator i3 Plus" + +// +// Limit Switches +// +#define X_STOP_PIN 54 // PF0 / A0 +#define Y_STOP_PIN 24 // PA2 / AD2 +#define Z_MIN_PIN 23 // PA1 / AD1 +#define Z_MAX_PIN 25 // PA3 / AD3 +#define SERVO0_PIN 40 // PG1 / !RD + +// +// Steppers +// +#define X_STEP_PIN 61 // PF7 / A7 +#define X_DIR_PIN 62 // PK0 / A8 +#define X_ENABLE_PIN 60 // PF6 / A6 + +#define Y_STEP_PIN 64 // PK2 / A10 +#define Y_DIR_PIN 65 // PK3 / A11 +#define Y_ENABLE_PIN 63 // PK1 / A9 + +#define Z_STEP_PIN 67 // PK5 / A13 +#define Z_DIR_PIN 69 // PK7 / A15 +#define Z_ENABLE_PIN 66 // PK4 / A12 +#define Z_MIN_PROBE_PIN 25 // PA3 / AD3 + +#define E0_STEP_PIN 58 // PF4 / A4 +#define E0_DIR_PIN 59 // PF5 / A5 +#define E0_ENABLE_PIN 57 // PF3 / A3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // PF1 / A1 Analog +#define TEMP_BED_PIN 14 // PK6 / A14 Analog + +// +// Heaters / Fans +// +#define HEATER_0_PIN 4 // PG5 / PWM4 +#define HEATER_BED_PIN 3 // PE5 / PWM3 + +#define FAN_PIN 5 // PE3 / PWM5 + +// +// Misc. Functions +// +#define SDSS 53 // PB0 / SS +#define LED_PIN 13 // PB7 / PWM13 + +#define MISO_PIN 50 // PB3 +#define MOSI_PIN 51 // PB2 +#define SCK_PIN 52 // PB1 + +// +// LCDs and Controllers +// +#if ENABLED(ULTRA_LCD) + #if ENABLED(ZONESTAR_LCD) + #define LCD_PINS_RS 2 + #define LCD_PINS_ENABLE 36 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 34 + #define LCD_PINS_D6 35 + #define LCD_PINS_D7 32 + #define ADC_KEYPAD_PIN 12 // Analog + #endif +#endif + +/** + * == EXT connector == + * + * 2 4 6 8 10 + * #---------------# + * #2 | ° ° ° ° ° | + * #1 | ° ° ° ° ° | + * #---------------# + * 1 3 5 7 9 + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 52 / PG1 (!RD) | 40 # + * # 2 | 95 / PF2 (A2) | 2 # + * # 3 | 54 / PC1 (A9) | 36 # + * # 4 | 53 / PC0 (A8) | 37 # + * # 5 | 56 / PC3 (A11) | 34 # + * # 6 | 55 / PC2 (A10) | 35 # + * # 7 | 58 / PC5 (A13) | 32 # + * # 8 | 57 / PC4 (A12) | 33 # + * # 9 | GND | - # + * # 10 | VCC | + # + * ################################## + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * == Z-probe connector == + * + * 1 2 3 + * #---------# + * | ° ° ° | + * #---------# + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 24V or 5V | + # + * # 2 | 75 / PA3 (AD3) | 25 # + * # 3 | GND | - # + * ################################## + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * == Y-endstop == == Z-endstop == == Bed temperature == + * + * 1 2 1 2 1 2 + * #------# #------# #------# + * | ° ° | | ° ° | | ° ° | + * #------# #------# #------# + * + * ############### Y ################ ############### Z ################ ############## BED ############### + * # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino # + * ################################## ################################## ################################## + * # 1 | GND | - # # 1 | GND | - # # 1 | GND | - # + * # 2 | 76 / PA2 (AD2) | 24 # # 2 | 77 / PA1 (AD1) | 23 # # 2 |83 / PK6 (ADC14)| 14 # + * ################################## ################################## ################################## + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * == SPI connector == + * + * 5 3 1 + * #---------# + * | ° ° ° | + * | ° ° ° | + * #---------# + * 6 4 2 + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 22 / PB3 (MISO)| 50 # + * # 2 | VCC | + # + * # 3 | 20 / PB1 (SCK) | 52 # + * # 4 | 21 / PB2 (MOSI)| 51 # + * # 5 | 30 / !RESET | RESET # + * # 6 | GND | - # + * ################################## + * + * Pictogram by Ludy https://github.com/Ludy87 + * See: https://sebastien.andrivet.com/en/posts/wanhao-duplicator-i3-plus-3d-printer/ + */ diff --git a/Marlin/src/pins/pins_MEGATRONICS_3.h b/Marlin/src/pins/pins_MEGATRONICS_3.h index 51c5c6a878..5a5b901413 100644 --- a/Marlin/src/pins/pins_MEGATRONICS_3.h +++ b/Marlin/src/pins/pins_MEGATRONICS_3.h @@ -21,14 +21,16 @@ */ /** - * MegaTronics v3.0 / v3.1 pin assignments + * MegaTronics v3.0 / v3.1 / v3.2 pin assignments */ #ifndef __AVR_ATmega2560__ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#if MB(MEGATRONICS_31) +#if MB(MEGATRONICS_32) + #define BOARD_NAME "Megatronics v3.2" +#elif MB(MEGATRONICS_31) #define BOARD_NAME "Megatronics v3.1" #else #define BOARD_NAME "Megatronics v3.0" @@ -161,7 +163,7 @@ #define SHIFT_OUT 34 #define SHIFT_EN 44 - #if MB(MEGATRONICS_31) + #if MB(MEGATRONICS_31) || MB(MEGATRONICS_32) #define SD_DETECT_PIN 56 #endif