melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Fix layout descr. in configuration_store.cpp

Browse Source
2.0.x
Scott Lahteine 9 years ago
parent d4e7c2d694
commit f00ca3fd89
1 changed files with 91 additions and 82 deletions
Show Stats Download Patch File Download Diff File

173
Marlin/configuration_store.cpp
Unescape Escape View File

@ -17,76 +17,79 @@
#define EEPROM_VERSION "V21" #define EEPROM_VERSION "V21"
/** /**
* V19 EEPROM Layout: * V21 EEPROM Layout:
* *
* ver * 100 Version (char x4)
* M92 XYZE axis_steps_per_unit (x4) *
* M203 XYZE max_feedrate (x4) * 104 M92 XYZE axis_steps_per_unit (float x4)
* M201 XYZE max_acceleration_units_per_sq_second (x4) * 120 M203 XYZE max_feedrate (float x4)
* M204 P acceleration * 136 M201 XYZE max_acceleration_units_per_sq_second (uint32_t x4)
* M204 R retract_acceleration * 152 M204 P acceleration (float)
* M204 T travel_acceleration * 156 M204 R retract_acceleration (float)
* M205 S minimumfeedrate * 160 M204 T travel_acceleration (float)
* M205 T mintravelfeedrate * 164 M205 S minimumfeedrate (float)
* M205 B minsegmenttime * 168 M205 T mintravelfeedrate (float)
* M205 X max_xy_jerk * 172 M205 B minsegmenttime (ulong)
* M205 Z max_z_jerk * 176 M205 X max_xy_jerk (float)
* M205 E max_e_jerk * 180 M205 Z max_z_jerk (float)
* M206 XYZ home_offset (x3) * 184 M205 E max_e_jerk (float)
* 188 M206 XYZ home_offset (float x3)
* *
* Mesh bed leveling: * Mesh bed leveling:
* M420 S active * 200 M420 S active (bool)
* mesh_num_x (set in firmware) * 201 mesh_num_x (uint8 as set in firmware)
* mesh_num_y (set in firmware) * 202 mesh_num_y (uint8 as set in firmware)
* M421 XYZ z_values[][] * 203 M421 XYZ z_values[][] (float x9, by default)
* M851 zprobe_zoffset * 239 M851 zprobe_zoffset (float)
* *
* DELTA: * DELTA:
* M666 XYZ endstop_adj (x3) * 243 M666 XYZ endstop_adj (float x3)
* M665 R delta_radius * 255 M665 R delta_radius (float)
* M665 L delta_diagonal_rod * 259 M665 L delta_diagonal_rod (float)
* M665 S delta_segments_per_second * 263 M665 S delta_segments_per_second (float)
*
* ULTIPANEL:
* M145 S0 H plaPreheatHotendTemp
* M145 S0 B plaPreheatHPBTemp
* M145 S0 F plaPreheatFanSpeed
* M145 S1 H absPreheatHotendTemp
* M145 S1 B absPreheatHPBTemp
* M145 S1 F absPreheatFanSpeed
*
* PIDTEMP:
* M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0]
* M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1]
* M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2]
* M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3]
* M301 L lpq_len
*
* PIDTEMPBED:
* M304 PID bedKp, bedKi, bedKd
*
* DOGLCD:
* M250 C lcd_contrast
*
* SCARA:
* M365 XYZ axis_scaling (x3)
*
* FWRETRACT:
* M209 S autoretract_enabled
* M207 S retract_length
* M207 W retract_length_swap
* M207 F retract_feedrate
* M207 Z retract_zlift
* M208 S retract_recover_length
* M208 W retract_recover_length_swap
* M208 F retract_recover_feedrate
*
* M200 D volumetric_enabled (D>0 makes this enabled)
*
* M200 T D filament_size (x4) (T0..3)
* *
* Z_DUAL_ENDSTOPS: * Z_DUAL_ENDSTOPS:
* M666 Z z_endstop_adj * 267 M666 Z z_endstop_adj (float)
*
* ULTIPANEL:
* 271 M145 S0 H plaPreheatHotendTemp (int)
* 273 M145 S0 B plaPreheatHPBTemp (int)
* 275 M145 S0 F plaPreheatFanSpeed (int)
* 277 M145 S1 H absPreheatHotendTemp (int)
* 279 M145 S1 B absPreheatHPBTemp (int)
* 281 M145 S1 F absPreheatFanSpeed (int)
*
* PIDTEMP:
* 283 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
* 299 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4)
* 315 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4)
* 331 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
* 347 M301 L lpq_len (int)
*
* PIDTEMPBED:
* 349 M304 PID bedKp, bedKi, bedKd (float x3)
*
* DOGLCD:
* 361 M250 C lcd_contrast (int)
*
* SCARA:
* 363 M365 XYZ axis_scaling (float x3)
*
* FWRETRACT:
* 375 M209 S autoretract_enabled (bool)
* 376 M207 S retract_length (float)
* 380 M207 W retract_length_swap (float)
* 384 M207 F retract_feedrate (float)
* 388 M207 Z retract_zlift (float)
* 392 M208 S retract_recover_length (float)
* 396 M208 W retract_recover_length_swap (float)
* 400 M208 F retract_recover_feedrate (float)
*
* Volumetric Extrusion:
* 404 M200 D volumetric_enabled (bool)
* 405 M200 T D filament_size (float x4) (T0..3)
*
* 421 This Slot is Available!
* *
*/ */
#include "Marlin.h" #include "Marlin.h"
@ -133,6 +136,10 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
/**
* Store Configuration Settings - M500
*/
void Config_StoreSettings() { void Config_StoreSettings() {
float dummy = 0.0f; float dummy = 0.0f;
char ver[4] = "000"; char ver[4] = "000";
@ -185,10 +192,10 @@ void Config_StoreSettings() {
#elif ENABLED(Z_DUAL_ENDSTOPS) #elif ENABLED(Z_DUAL_ENDSTOPS)
EEPROM_WRITE_VAR(i, z_endstop_adj); // 1 floats EEPROM_WRITE_VAR(i, z_endstop_adj); // 1 floats
dummy = 0.0f; dummy = 0.0f;
for (int q = 5; q--;) EEPROM_WRITE_VAR(i, dummy); for (uint8_t q = 5; q--;) EEPROM_WRITE_VAR(i, dummy);
#else #else
dummy = 0.0f; dummy = 0.0f;
for (int q = 6; q--;) EEPROM_WRITE_VAR(i, dummy); for (uint8_t q = 6; q--;) EEPROM_WRITE_VAR(i, dummy);
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
@ -203,7 +210,7 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, absPreheatHPBTemp); EEPROM_WRITE_VAR(i, absPreheatHPBTemp);
EEPROM_WRITE_VAR(i, absPreheatFanSpeed); EEPROM_WRITE_VAR(i, absPreheatFanSpeed);
for (int e = 0; e < 4; e++) { for (uint8_t e = 0; e < 4; e++) {
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
if (e < EXTRUDERS) { if (e < EXTRUDERS) {
@ -223,7 +230,7 @@ void Config_StoreSettings() {
dummy = DUMMY_PID_VALUE; // When read, will not change the existing value dummy = DUMMY_PID_VALUE; // When read, will not change the existing value
EEPROM_WRITE_VAR(i, dummy); EEPROM_WRITE_VAR(i, dummy);
dummy = 0.0f; dummy = 0.0f;
for (int q = 3; q--;) EEPROM_WRITE_VAR(i, dummy); for (uint8_t q = 3; q--;) EEPROM_WRITE_VAR(i, dummy);
} }
} // Extruders Loop } // Extruders Loop
@ -277,7 +284,7 @@ void Config_StoreSettings() {
EEPROM_WRITE_VAR(i, volumetric_enabled); EEPROM_WRITE_VAR(i, volumetric_enabled);
// Save filament sizes // Save filament sizes
for (int q = 0; q < 4; q++) { for (uint8_t q = 0; q < 4; q++) {
if (q < EXTRUDERS) dummy = filament_size[q]; if (q < EXTRUDERS) dummy = filament_size[q];
EEPROM_WRITE_VAR(i, dummy); EEPROM_WRITE_VAR(i, dummy);
} }
@ -339,10 +346,10 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, mbl.z_values); EEPROM_READ_VAR(i, mbl.z_values);
} else { } else {
mbl.reset(); mbl.reset();
for (int q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy); for (uint8_t q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy);
} }
#else #else
for (int q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy); for (uint8_t q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy);
#endif // MESH_BED_LEVELING #endif // MESH_BED_LEVELING
#if DISABLED(AUTO_BED_LEVELING_FEATURE) #if DISABLED(AUTO_BED_LEVELING_FEATURE)
@ -358,10 +365,10 @@ void Config_RetrieveSettings() {
#elif ENABLED(Z_DUAL_ENDSTOPS) #elif ENABLED(Z_DUAL_ENDSTOPS)
EEPROM_READ_VAR(i, z_endstop_adj); EEPROM_READ_VAR(i, z_endstop_adj);
dummy = 0.0f; dummy = 0.0f;
for (int q=5; q--;) EEPROM_READ_VAR(i, dummy); for (uint8_t q=5; q--;) EEPROM_READ_VAR(i, dummy);
#else #else
dummy = 0.0f; dummy = 0.0f;
for (int q=6; q--;) EEPROM_READ_VAR(i, dummy); for (uint8_t q=6; q--;) EEPROM_READ_VAR(i, dummy);
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
@ -377,7 +384,7 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, absPreheatFanSpeed); EEPROM_READ_VAR(i, absPreheatFanSpeed);
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin for (uint8_t e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin
EEPROM_READ_VAR(i, dummy); // Kp EEPROM_READ_VAR(i, dummy); // Kp
if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) { if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) {
// do not need to scale PID values as the values in EEPROM are already scaled // do not need to scale PID values as the values in EEPROM are already scaled
@ -391,12 +398,12 @@ void Config_RetrieveSettings() {
#endif #endif
} }
else { else {
for (int q=3; q--;) EEPROM_READ_VAR(i, dummy); // Ki, Kd, Kc for (uint8_t q=3; q--;) EEPROM_READ_VAR(i, dummy); // Ki, Kd, Kc
} }
} }
#else // !PIDTEMP #else // !PIDTEMP
// 4 x 4 = 16 slots for PID parameters // 4 x 4 = 16 slots for PID parameters
for (int q=16; q--;) EEPROM_READ_VAR(i, dummy); // 4x Kp, Ki, Kd, Kc for (uint8_t q=16; q--;) EEPROM_READ_VAR(i, dummy); // 4x Kp, Ki, Kd, Kc
#endif // !PIDTEMP #endif // !PIDTEMP
#if DISABLED(PID_ADD_EXTRUSION_RATE) #if DISABLED(PID_ADD_EXTRUSION_RATE)
@ -415,7 +422,7 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, bedKd); EEPROM_READ_VAR(i, bedKd);
} }
else { else {
for (int q=2; q--;) EEPROM_READ_VAR(i, dummy); // bedKi, bedKd for (uint8_t q=2; q--;) EEPROM_READ_VAR(i, dummy); // bedKi, bedKd
} }
#if DISABLED(HAS_LCD_CONTRAST) #if DISABLED(HAS_LCD_CONTRAST)
@ -450,7 +457,7 @@ void Config_RetrieveSettings() {
EEPROM_READ_VAR(i, volumetric_enabled); EEPROM_READ_VAR(i, volumetric_enabled);
for (int q = 0; q < 4; q++) { for (uint8_t q = 0; q < 4; q++) {
EEPROM_READ_VAR(i, dummy); EEPROM_READ_VAR(i, dummy);
if (q < EXTRUDERS) filament_size[q] = dummy; if (q < EXTRUDERS) filament_size[q] = dummy;
} }
@ -538,7 +545,7 @@ void Config_ResetDefault() {
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
#if ENABLED(PID_PARAMS_PER_EXTRUDER) #if ENABLED(PID_PARAMS_PER_EXTRUDER)
for (int e = 0; e < EXTRUDERS; e++) for (uint8_t e = 0; e < EXTRUDERS; e++)
#else #else
int e = 0; UNUSED(e); // only need to write once int e = 0; UNUSED(e); // only need to write once
#endif #endif
@ -686,8 +693,8 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" X", (unsigned long)MESH_NUM_X_POINTS); SERIAL_ECHOPAIR(" X", (unsigned long)MESH_NUM_X_POINTS);
SERIAL_ECHOPAIR(" Y", (unsigned long)MESH_NUM_Y_POINTS); SERIAL_ECHOPAIR(" Y", (unsigned long)MESH_NUM_Y_POINTS);
SERIAL_EOL; SERIAL_EOL;
for (int y = 0; y < MESH_NUM_Y_POINTS; y++) { for (uint8_t y = 0; y < MESH_NUM_Y_POINTS; y++) {
for (int x = 0; x < MESH_NUM_X_POINTS; x++) { for (uint8_t x = 0; x < MESH_NUM_X_POINTS; x++) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M421 X", mbl.get_x(x)); SERIAL_ECHOPAIR(" M421 X", mbl.get_x(x));
SERIAL_ECHOPAIR(" Y", mbl.get_y(y)); SERIAL_ECHOPAIR(" Y", mbl.get_y(y));
@ -708,8 +715,10 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS]); SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS]);
SERIAL_EOL; SERIAL_EOL;
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second"); if (!forReplay) {
CONFIG_ECHO_START; SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second");
CONFIG_ECHO_START;
}
SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod); SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod);
SERIAL_ECHOPAIR(" R", delta_radius); SERIAL_ECHOPAIR(" R", delta_radius);
SERIAL_ECHOPAIR(" S", delta_segments_per_second); SERIAL_ECHOPAIR(" S", delta_segments_per_second);

Write Preview
Loading…
Cancel
Save