melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update descriptions and dont call unneeded functions

Browse Source
2.0.x
InsanityAutomation 6 years ago
parent fe346cd4d1
commit eb91f08725
94 changed files with 385 additions and 117 deletions
Show Stats Download Patch File Download Diff File

5
Marlin/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

24
Marlin/src/feature/bltouch.cpp
Unescape Escape View File

@ -70,19 +70,23 @@ bool BLTouch::set_deployed(const bool in_deploy) {
} }
} }
#if ENABLED(BLTOUCH_FORCE_5V_MODE) #if ENABLED(BLTOUCH_V3)
set_5V_mode(); #if ENABLED(BLTOUCH_FORCE_5V_MODE)
#elif ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE) set_5V_mode();
set_OD_mode(); #elif ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
#elif ENABLED(ENDSTOPPULLUPS) || ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) || (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE)) set_OD_mode();
set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled #elif ENABLED(ENDSTOPPULLUPS) || ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) || (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE))
#else set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled
set_OD_mode(); #else
set_OD_mode();
#endif
#endif #endif
if (in_deploy) { if (in_deploy) {
_deploy(); _deploy();
set_SW_mode(); // Ensure Switch mode is activated for BLTouch V3. Ignored on V2.
#if ENABLED(BLTOUCH_V3)
set_SW_mode();
#endif
} }
else _stow(); else _stow();

18
Marlin/src/feature/bltouch.h
Unescape Escape View File

@ -43,21 +43,9 @@ public:
FORCE_INLINE static void reset() { command(BLTOUCH_RESET); } FORCE_INLINE static void reset() { command(BLTOUCH_RESET); }
FORCE_INLINE static void selftest() { command(BLTOUCH_SELFTEST); } FORCE_INLINE static void selftest() { command(BLTOUCH_SELFTEST); }
FORCE_INLINE static void set_5V_mode() { FORCE_INLINE static void set_5V_mode() { command(BLTOUCH_5V_MODE); }
#if ENABLED(BLTOUCH_V3) FORCE_INLINE static void set_OD_mode() { command(BLTOUCH_OD_MODE); }
command(BLTOUCH_5V_MODE); FORCE_INLINE static void set_SW_mode() { command(BLTOUCH_SW_MODE); }
#endif
}
FORCE_INLINE static void set_OD_mode() {
#if ENABLED(BLTOUCH_V3)
command(BLTOUCH_OD_MODE);
#endif
}
FORCE_INLINE static void set_SW_mode() {
#if ENABLED(BLTOUCH_V3)
command(BLTOUCH_SW_MODE);
#endif
}
FORCE_INLINE static bool deploy() { return set_deployed(true); } FORCE_INLINE static bool deploy() { return set_deployed(true); }
FORCE_INLINE static bool stow() { return set_deployed(false); } FORCE_INLINE static bool stow() { return set_deployed(false); }

5
config/default/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/3DFabXYZ/Migbot/Configuration.h
Unescape Escape View File

@ -824,7 +824,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/AlephObjects/TAZ4/Configuration.h
Unescape Escape View File

@ -838,7 +838,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/AliExpress/CL-260/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/AliExpress/UM2pExt/Configuration.h
Unescape Escape View File

@ -829,7 +829,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Anet/A2/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Anet/A2plus/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Anet/A6/Configuration.h
Unescape Escape View File

@ -865,7 +865,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Anet/A8/Configuration.h
Unescape Escape View File

@ -831,7 +831,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/AnyCubic/i3/Configuration.h
Unescape Escape View File

@ -828,7 +828,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/ArmEd/Configuration.h
Unescape Escape View File

@ -819,7 +819,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Azteeg/X5GT/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/BIBO/TouchX/cyclops/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/BIBO/TouchX/default/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/BQ/Hephestos/Configuration.h
Unescape Escape View File

@ -806,7 +806,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/BQ/Hephestos_2/Configuration.h
Unescape Escape View File

@ -819,7 +819,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/BQ/WITBOX/Configuration.h
Unescape Escape View File

@ -806,7 +806,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Cartesio/Configuration.h
Unescape Escape View File

@ -817,7 +817,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/CR-10/Configuration.h
Unescape Escape View File

@ -828,7 +828,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/CR-10S/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/CR-10_5S/Configuration.h
Unescape Escape View File

@ -819,7 +819,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/CR-10mini/Configuration.h
Unescape Escape View File

@ -837,7 +837,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/CR-8/Configuration.h
Unescape Escape View File

@ -828,7 +828,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/Ender-2/Configuration.h
Unescape Escape View File

@ -822,7 +822,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/Ender-3/Configuration.h
Unescape Escape View File

@ -822,7 +822,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Creality/Ender-4/Configuration.h
Unescape Escape View File

@ -828,7 +828,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Einstart-S/Configuration.h
Unescape Escape View File

@ -829,7 +829,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Felix/Configuration.h
Unescape Escape View File

@ -800,7 +800,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Felix/DUAL/Configuration.h
Unescape Escape View File

@ -800,7 +800,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/FlashForge/CreatorPro/Configuration.h
Unescape Escape View File

@ -810,7 +810,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/FolgerTech/i3-2020/Configuration.h
Unescape Escape View File

@ -824,7 +824,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Formbot/Raptor/Configuration.h
Unescape Escape View File

@ -901,7 +901,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Formbot/T_Rex_2+/Configuration.h
Unescape Escape View File

@ -847,7 +847,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Formbot/T_Rex_3/Configuration.h
Unescape Escape View File

@ -834,7 +834,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/A10M/Configuration.h
Unescape Escape View File

@ -801,7 +801,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/A20M/Configuration.h
Unescape Escape View File

@ -801,7 +801,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/GT2560/Configuration.h
Unescape Escape View File

@ -833,7 +833,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/MeCreator2/Configuration.h
Unescape Escape View File

@ -825,7 +825,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
Unescape Escape View File

@ -834,7 +834,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
Unescape Escape View File

@ -833,7 +833,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Infitary/i3-M508/Configuration.h
Unescape Escape View File

@ -822,7 +822,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/JGAurora/A5/Configuration.h
Unescape Escape View File

@ -830,7 +830,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/MakerParts/Configuration.h
Unescape Escape View File

@ -838,7 +838,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Malyan/M150/Configuration.h
Unescape Escape View File

@ -838,7 +838,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Malyan/M200/Configuration.h
Unescape Escape View File

@ -817,7 +817,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Micromake/C1/basic/Configuration.h
Unescape Escape View File

@ -822,7 +822,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Micromake/C1/enhanced/Configuration.h
Unescape Escape View File

@ -822,7 +822,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Mks/Robin/Configuration.h
Unescape Escape View File

@ -819,7 +819,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Mks/Sbase/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Printrbot/PrintrboardG2/Configuration.h
Unescape Escape View File

@ -826,7 +826,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/RapideLite/RL200/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/RepRapPro/Huxley/Configuration.h
Unescape Escape View File

@ -858,7 +858,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/RepRapWorld/Megatronics/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/RigidBot/Configuration.h
Unescape Escape View File

@ -816,7 +816,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/SCARA/Configuration.h
Unescape Escape View File

@ -831,7 +831,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/STM32F10/Configuration.h
Unescape Escape View File

@ -820,7 +820,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/STM32F4/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Sanguinololu/Configuration.h
Unescape Escape View File

@ -849,7 +849,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/TheBorg/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/TinyBoy2/Configuration.h
Unescape Escape View File

@ -869,7 +869,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Tronxy/X1/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Tronxy/X3A/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Tronxy/X5S-2E/Configuration.h
Unescape Escape View File

@ -839,7 +839,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Tronxy/X5S/Configuration.h
Unescape Escape View File

@ -817,7 +817,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Tronxy/XY100/Configuration.h
Unescape Escape View File

@ -829,7 +829,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/UltiMachine/Archim1/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/UltiMachine/Archim2/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/VORONDesign/Configuration.h
Unescape Escape View File

@ -827,7 +827,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Velleman/K8200/Configuration.h
Unescape Escape View File

@ -847,7 +847,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Velleman/K8400/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Velleman/K8400/Dual-head/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/WASP/PowerWASP/Configuration.h
Unescape Escape View File

@ -837,7 +837,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/Wanhao/Duplicator 6/Configuration.h
Unescape Escape View File

@ -828,7 +828,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/adafruit/ST7565/Configuration.h
Unescape Escape View File

@ -818,7 +818,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/Anycubic/Kossel/Configuration.h
Unescape Escape View File

@ -954,7 +954,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/FLSUN/auto_calibrate/Configuration.h
Unescape Escape View File

@ -900,7 +900,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/FLSUN/kossel/Configuration.h
Unescape Escape View File

@ -900,7 +900,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/FLSUN/kossel_mini/Configuration.h
Unescape Escape View File

@ -900,7 +900,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/Geeetech/Rostock 301/Configuration.h
Unescape Escape View File

@ -890,7 +890,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/Hatchbox_Alpha/Configuration.h
Unescape Escape View File

@ -905,7 +905,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/MKS/SBASE/Configuration.h
Unescape Escape View File

@ -890,7 +890,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/generic/Configuration.h
Unescape Escape View File

@ -890,7 +890,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/kossel_mini/Configuration.h
Unescape Escape View File

@ -890,7 +890,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/kossel_pro/Configuration.h
Unescape Escape View File

@ -883,7 +883,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/delta/kossel_xl/Configuration.h
Unescape Escape View File

@ -893,7 +893,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/makibox/Configuration.h
Unescape Escape View File

@ -821,7 +821,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/stm32f103ret6/Configuration.h
Unescape Escape View File

@ -820,7 +820,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/tvrrug/Round2/Configuration.h
Unescape Escape View File

@ -813,7 +813,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

5
config/examples/wt150/Configuration.h
Unescape Escape View File

@ -823,7 +823,10 @@
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series /** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
*/
//#define BLTOUCH_V3 //#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3) #if ENABLED(BLTOUCH_V3)
//#define BLTOUCH_FORCE_5V_MODE //#define BLTOUCH_FORCE_5V_MODE

Write Preview
Loading…
Cancel
Save