From e593da1c23a4759f6591826f815a504f0272e21a Mon Sep 17 00:00:00 2001 From: George Fu Date: Sat, 4 Jan 2020 11:00:44 +0800 Subject: [PATCH] Update and fix DGUS (#16317) --- Marlin/Configuration.h | 6 +- Marlin/Configuration_adv.h | 38 + Marlin/src/HAL/HAL_AVR/HAL.h | 13 + Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp | 27 + Marlin/src/HAL/HAL_AVR/MarlinSerial.h | 20 + Marlin/src/HAL/HAL_DUE/HAL.h | 21 + Marlin/src/HAL/HAL_LPC1768/HAL.h | 20 + Marlin/src/HAL/HAL_SAMD51/HAL.h | 20 + Marlin/src/HAL/HAL_STM32/HAL.h | 28 + Marlin/src/HAL/HAL_STM32F1/HAL.h | 25 + Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h | 26 + Marlin/src/HAL/shared/MarlinSerial.h | 7 + Marlin/src/gcode/feature/powerloss/M1000.cpp | 5 + Marlin/src/gcode/temperature/M303.cpp | 7 + Marlin/src/inc/Conditionals_LCD.h | 1 + Marlin/src/inc/SanityCheck.h | 6 +- .../extensible_ui/lib/dgus/DGUSDisplay.cpp | 922 +++++++++++------- .../lcd/extensible_ui/lib/dgus/DGUSDisplay.h | 75 ++ .../lib/dgus/DGUSDisplayDefinition.h | 158 +-- .../lib/dgus/DGUSDisplayDefinitionFYSETC.cpp | 476 +++++++++ .../lib/dgus/DGUSDisplayDefinitionFYSETC.h | 290 ++++++ .../lib/dgus/DGUSDisplayDefinitionHIPRECY.cpp | 476 +++++++++ .../lib/dgus/DGUSDisplayDefinitionHIPRECY.h | 289 ++++++ ...on.cpp => DGUSDisplayDefinitionOrigin.cpp} | 125 ++- .../lib/dgus/DGUSDisplayDefinitionOrigin.h | 280 ++++++ Marlin/src/lcd/extensible_ui/ui_api.h | 7 + Marlin/src/lcd/extui_dgus_lcd.cpp | 71 +- Marlin/src/lcd/extui_example.cpp | 12 + Marlin/src/module/temperature.cpp | 18 + config/default/Configuration.h | 6 +- config/default/Configuration_adv.h | 38 + .../examples/3DFabXYZ/Migbot/Configuration.h | 6 +- .../3DFabXYZ/Migbot/Configuration_adv.h | 38 + .../ADIMLab/Gantry v1/Configuration.h | 6 +- .../ADIMLab/Gantry v1/Configuration_adv.h | 38 + .../ADIMLab/Gantry v2/Configuration.h | 6 +- .../ADIMLab/Gantry v2/Configuration_adv.h | 38 + .../AlephObjects/TAZ4/Configuration.h | 6 +- .../AlephObjects/TAZ4/Configuration_adv.h | 38 + .../Alfawise/U20-bltouch/Configuration.h | 6 +- .../Alfawise/U20-bltouch/Configuration_adv.h | 38 + config/examples/Alfawise/U20/Configuration.h | 6 +- .../examples/Alfawise/U20/Configuration_adv.h | 38 + .../AliExpress/CL-260/Configuration.h | 6 +- .../AliExpress/UM2pExt/Configuration.h | 6 +- .../AliExpress/UM2pExt/Configuration_adv.h | 38 + config/examples/Anet/A2/Configuration.h | 6 +- config/examples/Anet/A2/Configuration_adv.h | 38 + config/examples/Anet/A2plus/Configuration.h | 6 +- .../examples/Anet/A2plus/Configuration_adv.h | 38 + config/examples/Anet/A6/Configuration.h | 6 +- config/examples/Anet/A6/Configuration_adv.h | 38 + config/examples/Anet/A8/Configuration.h | 6 +- config/examples/Anet/A8/Configuration_adv.h | 38 + config/examples/Anet/A8plus/Configuration.h | 6 +- .../examples/Anet/A8plus/Configuration_adv.h | 38 + config/examples/Anet/E10/Configuration.h | 6 +- config/examples/Anet/E10/Configuration_adv.h | 38 + config/examples/Anet/E16/Configuration.h | 6 +- config/examples/Anet/E16/Configuration_adv.h | 38 + config/examples/AnyCubic/i3/Configuration.h | 6 +- .../examples/AnyCubic/i3/Configuration_adv.h | 38 + config/examples/ArmEd/Configuration.h | 6 +- config/examples/ArmEd/Configuration_adv.h | 38 + .../examples/Artillery/Genius/Configuration.h | 6 +- .../Artillery/Genius/Configuration_adv.h | 38 + .../Artillery/Sidewinder X1/Configuration.h | 6 +- .../Sidewinder X1/Configuration_adv.h | 38 + config/examples/Azteeg/X5GT/Configuration.h | 6 +- .../BIBO/TouchX/cyclops/Configuration.h | 6 +- .../BIBO/TouchX/cyclops/Configuration_adv.h | 38 + .../BIBO/TouchX/default/Configuration.h | 6 +- .../BIBO/TouchX/default/Configuration_adv.h | 38 + config/examples/BQ/Hephestos/Configuration.h | 6 +- .../examples/BQ/Hephestos/Configuration_adv.h | 38 + .../examples/BQ/Hephestos_2/Configuration.h | 6 +- .../BQ/Hephestos_2/Configuration_adv.h | 38 + config/examples/BQ/WITBOX/Configuration.h | 6 +- config/examples/BQ/WITBOX/Configuration_adv.h | 38 + .../SKR Mini E3 1.0/Configuration.h | 6 +- .../SKR Mini E3 1.0/Configuration_adv.h | 38 + .../SKR Mini E3 1.2/Configuration.h | 6 +- .../SKR Mini E3 1.2/Configuration_adv.h | 38 + config/examples/Cartesio/Configuration.h | 6 +- config/examples/Cartesio/Configuration_adv.h | 38 + .../examples/Creality/CR-10/Configuration.h | 6 +- .../Creality/CR-10/Configuration_adv.h | 38 + .../examples/Creality/CR-10S/Configuration.h | 6 +- .../Creality/CR-10S/Configuration_adv.h | 38 + .../Creality/CR-10_5S/Configuration.h | 6 +- .../Creality/CR-10_5S/Configuration_adv.h | 38 + .../Creality/CR-10mini/Configuration.h | 6 +- .../Creality/CR-10mini/Configuration_adv.h | 38 + .../Creality/CR-20 Pro/Configuration.h | 6 +- .../Creality/CR-20 Pro/Configuration_adv.h | 38 + .../examples/Creality/CR-20/Configuration.h | 6 +- .../Creality/CR-20/Configuration_adv.h | 38 + config/examples/Creality/CR-8/Configuration.h | 6 +- .../Creality/CR-8/Configuration_adv.h | 38 + .../examples/Creality/Ender-2/Configuration.h | 6 +- .../Creality/Ender-2/Configuration_adv.h | 38 + .../examples/Creality/Ender-3/Configuration.h | 6 +- .../Creality/Ender-3/Configuration_adv.h | 38 + .../examples/Creality/Ender-4/Configuration.h | 6 +- .../Creality/Ender-4/Configuration_adv.h | 38 + .../Creality/Ender-5 Pro/Configuration.h | 6 +- .../Creality/Ender-5 Pro/Configuration_adv.h | 38 + .../examples/Creality/Ender-5/Configuration.h | 6 +- .../Creality/Ender-5/Configuration_adv.h | 38 + .../Dagoma/Disco Ultimate/Configuration.h | 6 +- .../Dagoma/Disco Ultimate/Configuration_adv.h | 38 + .../Imprimante multifonction/Configuration.h | 6 +- .../Configuration_adv.h | 38 + config/examples/Einstart-S/Configuration.h | 6 +- .../examples/Einstart-S/Configuration_adv.h | 38 + config/examples/FYSETC/AIO_II/Configuration.h | 6 +- .../FYSETC/AIO_II/Configuration_adv.h | 38 + .../Cheetah 1.2/BLTouch/Configuration.h | 6 +- .../Cheetah 1.2/BLTouch/Configuration_adv.h | 38 + .../FYSETC/Cheetah 1.2/base/Configuration.h | 6 +- .../Cheetah 1.2/base/Configuration_adv.h | 38 + .../FYSETC/Cheetah/BLTouch/Configuration.h | 6 +- .../Cheetah/BLTouch/Configuration_adv.h | 38 + .../FYSETC/Cheetah/base/Configuration.h | 6 +- .../FYSETC/Cheetah/base/Configuration_adv.h | 38 + config/examples/FYSETC/F6_13/Configuration.h | 6 +- .../examples/FYSETC/F6_13/Configuration_adv.h | 38 + config/examples/FYSETC/S6/Configuration.h | 6 +- config/examples/FYSETC/S6/Configuration_adv.h | 38 + config/examples/Felix/DUAL/Configuration.h | 6 +- .../examples/Felix/DUAL/Configuration_adv.h | 38 + config/examples/Felix/Single/Configuration.h | 6 +- .../examples/Felix/Single/Configuration_adv.h | 38 + .../FlashForge/CreatorPro/Configuration.h | 6 +- .../FlashForge/CreatorPro/Configuration_adv.h | 38 + .../FolgerTech/i3-2020/Configuration.h | 6 +- .../FolgerTech/i3-2020/Configuration_adv.h | 38 + .../examples/Formbot/Raptor/Configuration.h | 6 +- .../Formbot/Raptor/Configuration_adv.h | 38 + .../examples/Formbot/T_Rex_2+/Configuration.h | 6 +- .../Formbot/T_Rex_2+/Configuration_adv.h | 38 + .../examples/Formbot/T_Rex_3/Configuration.h | 6 +- .../Formbot/T_Rex_3/Configuration_adv.h | 38 + config/examples/Geeetech/A10/Configuration.h | 6 +- .../examples/Geeetech/A10/Configuration_adv.h | 38 + config/examples/Geeetech/A10D/Configuration.h | 6 +- .../Geeetech/A10D/Configuration_adv.h | 38 + config/examples/Geeetech/A10M/Configuration.h | 6 +- .../Geeetech/A10M/Configuration_adv.h | 38 + config/examples/Geeetech/A10T/Configuration.h | 6 +- .../Geeetech/A10T/Configuration_adv.h | 38 + config/examples/Geeetech/A20/Configuration.h | 6 +- .../examples/Geeetech/A20/Configuration_adv.h | 38 + config/examples/Geeetech/A20M/Configuration.h | 6 +- .../Geeetech/A20M/Configuration_adv.h | 38 + config/examples/Geeetech/A20T/Configuration.h | 6 +- .../Geeetech/A20T/Configuration_adv.h | 38 + config/examples/Geeetech/A30/Configuration.h | 6 +- .../examples/Geeetech/A30/Configuration_adv.h | 38 + config/examples/Geeetech/D200/Configuration.h | 6 +- .../Geeetech/D200/Configuration_adv.h | 38 + config/examples/Geeetech/E180/Configuration.h | 6 +- .../Geeetech/E180/Configuration_adv.h | 38 + .../examples/Geeetech/GT2560/Configuration.h | 6 +- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 6 +- config/examples/Geeetech/M201/Configuration.h | 6 +- .../Geeetech/M201/Configuration_adv.h | 38 + .../Geeetech/MeCreator2/Configuration.h | 6 +- .../Geeetech/MeCreator2/Configuration_adv.h | 38 + .../Geeetech/PI3A PRO/Configuration.h | 6 +- .../Geeetech/PI3A PRO/Configuration_adv.h | 38 + .../Prusa i3 Pro B/bltouch/Configuration.h | 6 +- .../Prusa i3 Pro B/noprobe/Configuration.h | 6 +- .../Geeetech/Prusa i3 Pro C/Configuration.h | 6 +- .../Prusa i3 Pro C/Configuration_adv.h | 38 + .../Geeetech/Prusa i3 Pro W/Configuration.h | 6 +- .../Prusa i3 Pro W/Configuration_adv.h | 38 + config/examples/HMS434/Configuration.h | 6 +- config/examples/HMS434/Configuration_adv.h | 38 + .../examples/Infitary/i3-M508/Configuration.h | 6 +- .../Infitary/i3-M508/Configuration_adv.h | 38 + config/examples/JGAurora/A1/Configuration.h | 6 +- .../examples/JGAurora/A1/Configuration_adv.h | 38 + config/examples/JGAurora/A5/Configuration.h | 6 +- .../examples/JGAurora/A5/Configuration_adv.h | 38 + config/examples/JGAurora/A5S/Configuration.h | 6 +- .../examples/JGAurora/A5S/Configuration_adv.h | 38 + .../examples/JGAurora/Magic/Configuration.h | 6 +- .../JGAurora/Magic/Configuration_adv.h | 38 + .../MakerFarm/Pegasus_12/Configuration.h | 6 +- .../MakerFarm/Pegasus_12/Configuration_adv.h | 38 + config/examples/MakerParts/Configuration.h | 6 +- .../examples/MakerParts/Configuration_adv.h | 38 + config/examples/Malyan/M150/Configuration.h | 6 +- .../examples/Malyan/M150/Configuration_adv.h | 38 + config/examples/Malyan/M200/Configuration.h | 6 +- .../examples/Malyan/M200/Configuration_adv.h | 38 + .../Micromake/C1/basic/Configuration.h | 6 +- .../Micromake/C1/enhanced/Configuration.h | 6 +- .../Micromake/C1/enhanced/Configuration_adv.h | 38 + config/examples/Mks/Robin/Configuration.h | 6 +- config/examples/Mks/Robin/Configuration_adv.h | 38 + .../examples/Mks/Robin_Lite3/Configuration.h | 6 +- config/examples/Mks/Robin_Pro/Configuration.h | 6 +- config/examples/Mks/Sbase/Configuration.h | 6 +- config/examples/Mks/Sbase/Configuration_adv.h | 38 + config/examples/Modix/Big60/Configuration.h | 6 +- .../examples/Modix/Big60/Configuration_adv.h | 38 + .../Printrbot/PrintrboardG2/Configuration.h | 6 +- .../examples/RapideLite/RL200/Configuration.h | 6 +- .../RapideLite/RL200/Configuration_adv.h | 38 + .../examples/Renkforce/RF100/Configuration.h | 6 +- .../Renkforce/RF100/Configuration_adv.h | 38 + .../Renkforce/RF100XL/Configuration.h | 6 +- .../Renkforce/RF100XL/Configuration_adv.h | 38 + .../Renkforce/RF100v2/Configuration.h | 6 +- .../Renkforce/RF100v2/Configuration_adv.h | 38 + .../examples/RepRapPro/Huxley/Configuration.h | 6 +- .../RepRapWorld/Megatronics/Configuration.h | 6 +- config/examples/RigidBot/Configuration.h | 6 +- config/examples/RigidBot/Configuration_adv.h | 38 + .../examples/SCARA/MP_SCARA/Configuration.h | 6 +- config/examples/SCARA/Morgan/Configuration.h | 6 +- .../examples/SCARA/Morgan/Configuration_adv.h | 38 + .../STM32/Black_STM32F407VET6/Configuration.h | 6 +- .../Black_STM32F407VET6/Configuration_adv.h | 38 + .../STM32/STM32F103RE/Configuration.h | 6 +- config/examples/STM32/STM32F4/Configuration.h | 6 +- .../STM32/stm32f103ret6/Configuration.h | 6 +- config/examples/Sanguinololu/Configuration.h | 6 +- .../examples/Sanguinololu/Configuration_adv.h | 38 + .../Tevo/Michelangelo/Configuration.h | 6 +- .../Tevo/Michelangelo/Configuration_adv.h | 38 + config/examples/Tevo/Nereus/Configuration.h | 6 +- .../examples/Tevo/Nereus/Configuration_adv.h | 38 + .../Tevo/Tarantula Pro/Configuration.h | 6 +- .../Tevo/Tarantula Pro/Configuration_adv.h | 38 + .../Tornado/V1 (MKS Base)/Configuration.h | 6 +- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 38 + .../Tornado/V2 (MKS GEN-L)/Configuration.h | 6 +- .../V2 (MKS GEN-L)/Configuration_adv.h | 38 + config/examples/TheBorg/Configuration.h | 6 +- config/examples/TheBorg/Configuration_adv.h | 38 + config/examples/TinyBoy2/Configuration.h | 6 +- config/examples/TinyBoy2/Configuration_adv.h | 38 + config/examples/Tronxy/X1/Configuration.h | 6 +- config/examples/Tronxy/X3A/Configuration.h | 6 +- .../examples/Tronxy/X3A/Configuration_adv.h | 38 + config/examples/Tronxy/X5S-2E/Configuration.h | 6 +- .../Tronxy/X5S-2E/Configuration_adv.h | 38 + config/examples/Tronxy/X5S/Configuration.h | 6 +- config/examples/Tronxy/XY100/Configuration.h | 6 +- .../UltiMachine/Archim1/Configuration.h | 6 +- .../UltiMachine/Archim1/Configuration_adv.h | 38 + .../UltiMachine/Archim2/Configuration.h | 6 +- .../UltiMachine/Archim2/Configuration_adv.h | 38 + config/examples/VORONDesign/Configuration.h | 6 +- .../examples/VORONDesign/Configuration_adv.h | 38 + .../examples/Velleman/K8200/Configuration.h | 6 +- .../Velleman/K8200/Configuration_adv.h | 38 + .../Velleman/K8400/Dual-head/Configuration.h | 6 +- .../K8400/Dual-head/Configuration_adv.h | 38 + .../K8400/Single-head/Configuration.h | 6 +- .../K8400/Single-head/Configuration_adv.h | 38 + .../examples/WASP/PowerWASP/Configuration.h | 6 +- .../WASP/PowerWASP/Configuration_adv.h | 38 + .../Wanhao/Duplicator 6/Configuration.h | 6 +- .../Wanhao/Duplicator 6/Configuration_adv.h | 38 + .../Wanhao/Duplicator i3 2.1/Configuration.h | 6 +- .../Duplicator i3 2.1/Configuration_adv.h | 38 + .../Wanhao/Duplicator i3 Mini/Configuration.h | 6 +- .../Duplicator i3 Mini/Configuration_adv.h | 38 + .../examples/adafruit/ST7565/Configuration.h | 6 +- .../delta/Anycubic/Kossel/Configuration.h | 6 +- .../delta/Anycubic/Kossel/Configuration_adv.h | 38 + .../delta/Dreammaker/Overlord/Configuration.h | 6 +- .../Dreammaker/Overlord/Configuration_adv.h | 38 + .../Dreammaker/Overlord_Pro/Configuration.h | 6 +- .../Overlord_Pro/Configuration_adv.h | 38 + .../examples/delta/FLSUN/QQ-S/Configuration.h | 6 +- .../delta/FLSUN/QQ-S/Configuration_adv.h | 38 + .../FLSUN/auto_calibrate/Configuration.h | 6 +- .../FLSUN/auto_calibrate/Configuration_adv.h | 38 + .../delta/FLSUN/kossel/Configuration.h | 6 +- .../delta/FLSUN/kossel/Configuration_adv.h | 38 + .../delta/FLSUN/kossel_mini/Configuration.h | 6 +- .../FLSUN/kossel_mini/Configuration_adv.h | 38 + .../Geeetech/Rostock 301/Configuration.h | 6 +- .../Geeetech/Rostock 301/Configuration_adv.h | 38 + .../delta/Hatchbox_Alpha/Configuration.h | 6 +- .../examples/delta/MKS/SBASE/Configuration.h | 6 +- .../delta/MKS/SBASE/Configuration_adv.h | 38 + .../delta/Tevo Little Monster/Configuration.h | 6 +- .../Tevo Little Monster/Configuration_adv.h | 38 + config/examples/delta/generic/Configuration.h | 6 +- .../delta/generic/Configuration_adv.h | 38 + .../delta/kossel_clear/Configuration.h | 6 +- .../delta/kossel_clear/Configuration_adv.h | 38 + .../delta/kossel_mini/Configuration.h | 6 +- .../delta/kossel_mini/Configuration_adv.h | 38 + .../examples/delta/kossel_pro/Configuration.h | 6 +- .../examples/delta/kossel_xl/Configuration.h | 6 +- .../delta/kossel_xl/Configuration_adv.h | 38 + .../examples/gCreate/gMax1.5+/Configuration.h | 6 +- .../gCreate/gMax1.5+/Configuration_adv.h | 38 + config/examples/makibox/Configuration.h | 6 +- config/examples/makibox/Configuration_adv.h | 38 + config/examples/tvrrug/Round2/Configuration.h | 6 +- .../tvrrug/Round2/Configuration_adv.h | 38 + config/examples/wt150/Configuration.h | 6 +- config/examples/wt150/Configuration_adv.h | 38 + 311 files changed, 8501 insertions(+), 820 deletions(-) create mode 100644 Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.cpp create mode 100644 Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.h create mode 100644 Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.cpp create mode 100644 Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.h rename Marlin/src/lcd/extensible_ui/lib/dgus/{DGUSDisplayDefinition.cpp => DGUSDisplayDefinitionOrigin.cpp} (55%) create mode 100644 Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.h diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f4c9de3a79..7a6e43c7a8 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index fc08d6ec12..04ed57cb73 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/Marlin/src/HAL/HAL_AVR/HAL.h b/Marlin/src/HAL/HAL_AVR/HAL.h index d739a379e8..fb664878bb 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL.h +++ b/Marlin/src/HAL/HAL_AVR/HAL.h @@ -109,6 +109,19 @@ typedef int8_t pin_t; #endif #endif +#ifdef DGUS_SERIAL_PORT + #if !WITHIN(DGUS_SERIAL_PORT, -1, 3) + #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration." + #elif DGUS_SERIAL_PORT == SERIAL_PORT + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration." + #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2 + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration." + #endif + #define DGUS_SERIAL internalDgusSerial + + #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free +#endif + // ------------------------ // Public functions // ------------------------ diff --git a/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp index dbf85bce10..691dab9103 100644 --- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp +++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp @@ -757,6 +757,33 @@ #endif +#ifdef DGUS_SERIAL_PORT + + template + typename MarlinSerial::ring_buffer_pos_t MarlinSerial::get_tx_buffer_free() { + const ring_buffer_pos_t t = tx_buffer.tail, // next byte to send. + h = tx_buffer.head; // next pos for queue. + int ret = t - h - 1; + if (ret < 0) ret += Cfg::TX_SIZE + 1; + return ret; + } + + ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_RX_vect)) { + MarlinSerial>::store_rxd_char(); + } + + ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_UDRE_vect)) { + MarlinSerial>::_tx_udr_empty_irq(); + } + + // Preinstantiate + template class MarlinSerial>; + + // Instantiate + MarlinSerial> internalDgusSerial; + +#endif + // For AT90USB targets use the UART for BT interfacing #if defined(USBCON) && ENABLED(BLUETOOTH) HardwareSerial bluetoothSerial; diff --git a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h index 7560d880e3..d2b3ff1558 100644 --- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h +++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h @@ -217,6 +217,9 @@ static ring_buffer_pos_t available(); static void write(const uint8_t c); static void flushTX(); + #ifdef DGUS_SERIAL_PORT + static ring_buffer_pos_t get_tx_buffer_free(); + #endif FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; } FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; } @@ -292,6 +295,23 @@ extern MarlinSerial> internalSerial; #endif +#ifdef DGUS_SERIAL_PORT + template + struct MarlinInternalSerialCfg { + static constexpr int PORT = serial; + static constexpr unsigned int RX_SIZE = 128; + static constexpr unsigned int TX_SIZE = 48; + static constexpr bool XONOFF = false; + static constexpr bool EMERGENCYPARSER = false; + static constexpr bool DROPPED_RX = false; + static constexpr bool RX_OVERRUNS = bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS; + static constexpr bool RX_FRAMING_ERRORS = false; + static constexpr bool MAX_RX_QUEUED = false; + }; + + extern MarlinSerial> internalDgusSerial; +#endif + // Use the UART for Bluetooth in AT90USB configurations #if defined(USBCON) && ENABLED(BLUETOOTH) extern HardwareSerial bluetoothSerial; diff --git a/Marlin/src/HAL/HAL_DUE/HAL.h b/Marlin/src/HAL/HAL_DUE/HAL.h index 3f38ae0a36..20016ef183 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL.h +++ b/Marlin/src/HAL/HAL_DUE/HAL.h @@ -74,6 +74,27 @@ #define NUM_SERIAL 1 #endif +#ifdef DGUS_SERIAL_PORT + #if DGUS_SERIAL_PORT == SERIAL_PORT + #error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration." + #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2 + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration." + #elif DGUS_SERIAL_PORT == -1 + #define DGUS_SERIAL internalDgusSerial + #elif DGUS_SERIAL_PORT == 0 + #define DGUS_SERIAL Serial + #elif DGUS_SERIAL_PORT == 1 + #define DGUS_SERIAL Serial1 + #elif DGUS_SERIAL_PORT == 2 + #define DGUS_SERIAL Serial2 + #elif DGUS_SERIAL_PORT == 3 + #define DGUS_SERIAL Serial3 + #else + #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration." + #endif +#endif + + #include "MarlinSerial.h" #include "MarlinSerialUSB.h" diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL.h b/Marlin/src/HAL/HAL_LPC1768/HAL.h index a85379ad99..69247dfd9b 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL.h +++ b/Marlin/src/HAL/HAL_LPC1768/HAL.h @@ -96,6 +96,26 @@ extern "C" volatile uint32_t _millis; #define NUM_SERIAL 1 #endif +#ifdef DGUS_SERIAL_PORT + #if DGUS_SERIAL_PORT == SERIAL_PORT + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration." + #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2 + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration." + #elif DGUS_SERIAL_PORT == -1 + #define DGUS_SERIAL UsbSerial + #elif DGUS_SERIAL_PORT == 0 + #define DGUS_SERIAL MSerial + #elif DGUS_SERIAL_PORT == 1 + #define DGUS_SERIAL MSerial1 + #elif DGUS_SERIAL_PORT == 2 + #define DGUS_SERIAL MSerial2 + #elif DGUS_SERIAL_PORT == 3 + #define DGUS_SERIAL MSerial3 + #else + #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration." + #endif +#endif + // // Interrupts // diff --git a/Marlin/src/HAL/HAL_SAMD51/HAL.h b/Marlin/src/HAL/HAL_SAMD51/HAL.h index 9551352200..d193e58694 100644 --- a/Marlin/src/HAL/HAL_SAMD51/HAL.h +++ b/Marlin/src/HAL/HAL_SAMD51/HAL.h @@ -71,6 +71,26 @@ #define NUM_SERIAL 1 #endif + #ifdef DGUS_SERIAL_PORT + #if DGUS_SERIAL_PORT == SERIAL_PORT + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration." + #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2 + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration." + #elif DGUS_SERIAL_PORT == -1 + #define DGUS_SERIAL Serial + #elif DGUS_SERIAL_PORT == 0 + #define DGUS_SERIAL Serial1 + #elif DGUS_SERIAL_PORT == 1 + #define DGUS_SERIAL Serial2 + #elif DGUS_SERIAL_PORT == 2 + #define DGUS_SERIAL Serial3 + #elif DGUS_SERIAL_PORT == 2 + #define DGUS_SERIAL Serial4 + #else + #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration." + #endif + #endif + #endif // ADAFRUIT_GRAND_CENTRAL_M4 typedef int8_t pin_t; diff --git a/Marlin/src/HAL/HAL_STM32/HAL.h b/Marlin/src/HAL/HAL_STM32/HAL.h index b27e5c6d62..995c7144f3 100644 --- a/Marlin/src/HAL/HAL_STM32/HAL.h +++ b/Marlin/src/HAL/HAL_STM32/HAL.h @@ -90,6 +90,34 @@ #define NUM_SERIAL 1 #endif +#if HAS_DGUS_LCD + #if DGUS_SERIAL_PORT == 0 + #error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration." + #elif DGUS_SERIAL_PORT == SERIAL_PORT + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration." + #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2 + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration." + #elif DGUS_SERIAL_PORT == -1 + #define DGUS_SERIAL SerialUSB + #elif DGUS_SERIAL_PORT == 1 + #define DGUS_SERIAL Serial1 + #elif DGUS_SERIAL_PORT == 2 + #define DGUS_SERIAL Serial2 + #elif DGUS_SERIAL_PORT == 3 + #define DGUS_SERIAL Serial3 + #elif DGUS_SERIAL_PORT == 4 + #define DGUS_SERIAL Serial4 + #elif DGUS_SERIAL_PORT == 5 + #define DGUS_SERIAL Serial5 + #elif DGUS_SERIAL_PORT == 6 + #define DGUS_SERIAL Serial6 + #else + #error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration." + #endif + + #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.availableForWrite +#endif + #include "timers.h" /** diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL.h b/Marlin/src/HAL/HAL_STM32F1/HAL.h index fea5ff86e8..4d2ff2a0a3 100644 --- a/Marlin/src/HAL/HAL_STM32F1/HAL.h +++ b/Marlin/src/HAL/HAL_STM32F1/HAL.h @@ -121,6 +121,31 @@ #define NUM_SERIAL 1 #endif +#ifdef DGUS_SERIAL + #if DGUS_SERIAL_PORT == 0 + #error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration." + #elif DGUS_SERIAL_PORT == SERIAL_PORT + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration." + #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2 + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration." + #elif DGUS_SERIAL_PORT == -1 + #define DGUS_SERIAL UsbSerial + #elif DGUS_SERIAL_PORT == 1 + #define DGUS_SERIAL MSerial1 + #elif DGUS_SERIAL_PORT == 2 + #define DGUS_SERIAL MSerial2 + #elif DGUS_SERIAL_PORT == 3 + #define DGUS_SERIAL MSerial3 + #elif DGUS_SERIAL_PORT == 4 + #define DGUS_SERIAL MSerial4 + #elif DGUS_SERIAL_PORT == 5 + #define DGUS_SERIAL MSerial5 + #else + #error "DGUS_SERIAL_PORT must be from -1 to 5. Please update your configuration." + #endif +#endif + + // Set interrupt grouping for this MCU void HAL_init(); #define HAL_IDLETASK 1 diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h b/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h index f4a581991e..41b445d65e 100644 --- a/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h +++ b/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h @@ -94,6 +94,32 @@ #define NUM_SERIAL 1 #endif +#ifdef DGUS_SERIAL_PORT + #if defined(STM32F4) && DGUS_SERIAL_PORT == 0 + #error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration." + #elif DGUS_SERIAL_PORT == SERIAL_PORT + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration." + #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2 + #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration." + #elif DGUS_SERIAL_PORT == -1 + #define DGUS_SERIAL SerialUSB + #elif DGUS_SERIAL_PORT == 1 + #define DGUS_SERIAL SerialUART1 + #elif DGUS_SERIAL_PORT == 2 + #define DGUS_SERIAL SerialUART2 + #elif DGUS_SERIAL_PORT == 3 + #define DGUS_SERIAL SerialUART3 + #elif DGUS_SERIAL_PORT == 4 + #define DGUS_SERIAL SerialUART4 + #elif DGUS_SERIAL_PORT == 5 + #define DGUS_SERIAL SerialUART5 + #elif DGUS_SERIAL_PORT == 6 + #define DGUS_SERIAL SerialUART6 + #else + #error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration." + #endif +#endif + /** * TODO: review this to return 1 for pins that are not analog input */ diff --git a/Marlin/src/HAL/shared/MarlinSerial.h b/Marlin/src/HAL/shared/MarlinSerial.h index afbd7d3443..c82bdbee7d 100644 --- a/Marlin/src/HAL/shared/MarlinSerial.h +++ b/Marlin/src/HAL/shared/MarlinSerial.h @@ -28,6 +28,13 @@ #include "../../inc/MarlinConfigPre.h" constexpr bool + #if HAS_DGUS_LCD + bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS = (false + #if ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS) + || true + #endif + ), + #endif bSERIAL_XON_XOFF = (false #if ENABLED(SERIAL_XON_XOFF) || true diff --git a/Marlin/src/gcode/feature/powerloss/M1000.cpp b/Marlin/src/gcode/feature/powerloss/M1000.cpp index f14dc60685..ac2194e1a8 100644 --- a/Marlin/src/gcode/feature/powerloss/M1000.cpp +++ b/Marlin/src/gcode/feature/powerloss/M1000.cpp @@ -28,6 +28,9 @@ #include "../../../feature/power_loss_recovery.h" #include "../../../module/motion.h" #include "../../../lcd/ultralcd.h" +#if ENABLED(EXTENSIBLE_UI) + #include "../../../lcd/extensible_ui/ui_api.h" +#endif #define DEBUG_OUT ENABLED(DEBUG_POWER_LOSS_RECOVERY) #include "../../../core/debug_out.h" @@ -55,6 +58,8 @@ void GcodeSuite::M1000() { if (parser.seen('S')) { #if HAS_LCD_MENU ui.goto_screen(menu_job_recovery); + #elif ENABLED(EXTENSIBLE_UI) + ExtUI::OnPowerLossResume(); #else SERIAL_ECHO_MSG("Resume requires LCD."); #endif diff --git a/Marlin/src/gcode/temperature/M303.cpp b/Marlin/src/gcode/temperature/M303.cpp index 2765dc64b4..e8f5f604f7 100644 --- a/Marlin/src/gcode/temperature/M303.cpp +++ b/Marlin/src/gcode/temperature/M303.cpp @@ -27,6 +27,10 @@ #include "../gcode.h" #include "../../module/temperature.h" +#if ENABLED(EXTENSIBLE_UI) + #include "../../lcd/extensible_ui/ui_api.h" +#endif + /** * M303: PID relay autotune * @@ -49,6 +53,9 @@ void GcodeSuite::M303() { const heater_ind_t e = (heater_ind_t)parser.intval('E'); if (!WITHIN(e, SI, EI)) { SERIAL_ECHOLNPGM(MSG_PID_BAD_EXTRUDER_NUM); + #if ENABLED(EXTENSIBLE_UI) + ExtUI::OnPidTuning(ExtUI::result_t::PID_BAD_EXTRUDER_NUM); + #endif return; } diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 1fbf222bfc..296662082f 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -359,6 +359,7 @@ #define HAS_CHARACTER_LCD (HAS_SPI_LCD && !HAS_GRAPHICAL_LCD) #define HAS_LCD_MENU (ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS)) #define HAS_ADC_BUTTONS ENABLED(ADC_KEYPAD) +#define HAS_DGUS_LCD ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) /** * Extruders have some combination of stepper motors and hotends diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 8bb487e0a2..cb6487afae 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -424,6 +424,8 @@ #error "FILAMENT_UNLOAD_DELAY is now FILAMENT_UNLOAD_PURGE_DELAY. Please update Configuration_adv.h." #elif defined(HOME_USING_SPREADCYCLE) #error "HOME_USING_SPREADCYCLE is now obsolete. Please remove it from Configuration_adv.h." +#elif defined(DGUS_LCD) + #error "DGUS_LCD is now DGUS_LCD_UI_(ORIGIN|FYSETC|HIPRECY). Please update your configuration." #endif /** @@ -1910,7 +1912,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS + ENABLED(MKS_12864OLED_SSD1306) \ + ENABLED(U8GLIB_SH1106_EINSTART) \ + ENABLED(OVERLORD_OLED) \ - + ENABLED(DGUS_LCD) \ + + ENABLED(DGUS_LCD_UI_ORIGIN) \ + + ENABLED(DGUS_LCD_UI_FYSETC) \ + + ENABLED(DGUS_LCD_UI_HIPRECY) \ + ENABLED(MALYAN_LCD) \ + ENABLED(TOUCH_UI_FTDI_EVE) \ + ENABLED(FSMC_GRAPHICAL_TFT) diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp index a9ba108e14..d8e2a5bdb4 100644 --- a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp @@ -24,7 +24,11 @@ #include "../../../../inc/MarlinConfigPre.h" -#if ENABLED(DGUS_LCD) +#if HAS_DGUS_LCD + +#if HOTENDS > 2 + #error "More than 2 hotends not implemented on the Display UI design." +#endif #include "DGUSDisplay.h" #include "DGUSVPVariable.h" @@ -40,6 +44,9 @@ #include "../../../../sd/cardreader.h" #include "../../../../libs/duration_t.h" #include "../../../../module/printcounter.h" +#if ENABLED(POWER_LOSS_RECOVERY) + #include "../../../../feature/power_loss_recovery.h" +#endif // Preamble... 2 Bytes, usually 0x5A 0xA5, but configurable constexpr uint8_t DGUS_HEADER1 = 0x5A; @@ -52,6 +59,16 @@ constexpr uint8_t DGUS_CMD_READVAR = 0x83; bool dguslcd_local_debug; // = false; #endif +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + typedef struct { + ExtUI::extruder_t extruder; // which extruder to operate + uint8_t action; // load or unload + bool heated; // heating done ? + float purge_length; // the length to extrude before unload, prevent filament jam + } filament_data_t; + static filament_data_t filament_data; +#endif + uint16_t DGUSScreenVariableHandler::ConfirmVP; #if ENABLED(SDSUPPORT) @@ -77,67 +94,7 @@ uint8_t DGUSDisplay::rx_datagram_len = 0; bool DGUSDisplay::Initialized = false; bool DGUSDisplay::no_reentrance = false; -#if DGUS_RX_BUFFER_SIZE > 256 - typedef uint16_t r_ring_buffer_pos_t; -#else - typedef uint8_t r_ring_buffer_pos_t; -#endif - -#if DGUS_TX_BUFFER_SIZE > 256 - typedef uint16_t t_ring_buffer_pos_t; -#else - typedef uint8_t t_ring_buffer_pos_t; -#endif - -class DGUSSerial { -public: - DGUSSerial(); - ~DGUSSerial(); - - r_ring_buffer_pos_t available(); - t_ring_buffer_pos_t GetTxBufferFree(); - void write(const uint8_t c); - - int read(); - - // ISR for Rx - void store_rxd_char(); - // ISR for Tx (UDRE vector) - void tx_udr_empty_irq(); - - inline volatile bool is_rx_overrun() { - return dgus_rx_overrun; - } - - inline void reset_rx_overun() { - dgus_rx_overrun = false; - } - -private: - r_ring_buffer_pos_t atomic_read_rx_head(); - void atomic_set_rx_tail(r_ring_buffer_pos_t value); - r_ring_buffer_pos_t atomic_read_rx_tail(); - - volatile bool dgus_rx_overrun = false; - - struct ring_buffer_r { - volatile r_ring_buffer_pos_t head, tail; - unsigned char buffer[DGUS_RX_BUFFER_SIZE]; - } rx_buffer = { 0, 0, { 0 } }; - - struct ring_buffer_t { - volatile t_ring_buffer_pos_t head, tail; - unsigned char buffer[DGUS_TX_BUFFER_SIZE]; - } tx_buffer = { 0, 0, { 0 } }; - - #if DGUS_RX_BUFFER_SIZE > 256 - volatile bool rx_tail_value_not_stable = false; - volatile uint16_t rx_tail_value_backup = 0; - #endif - -}; - -static DGUSSerial dgusserial; +#define dgusserial DGUS_SERIAL // endianness swap uint16_t swap16(const uint16_t value) { return (value & 0xffU) << 8U | (value >> 8U); } @@ -226,25 +183,11 @@ void DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable // It is using a hex display for that: It expects BSD coded data in the format xxyyzz void DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var) { duration_t elapsed = print_job_timer.duration(); - - uint8_t days = elapsed.day(), - hours = elapsed.hour() % 24, - minutes = elapsed.minute() % 60, - seconds = elapsed.second() % 60; - - char buf[14], *p = buf; // that two extra bytes saves us some flash... - - if (days) { *p++ = days / 10 + '0'; *p++ = days % 10 + '0'; *p++ = 'd'; } - *p++ = hours / 10 + '0'; *p++ = hours % 10 + '0'; *p++ = 'h'; - *p++ = minutes / 10 + '0'; *p++ = minutes % 10 + '0'; *p++ = 'm'; - *p++ = seconds / 10 + '0'; *p++ = seconds % 10 + '0'; *p++ = 's'; - *p = '\0'; - + char buf[32]; + elapsed.toString(buf); dgusdisplay.WriteVariable(VP_PrintTime, buf, var.size, true); } - - // Send an uint8_t between 0 and 100 to a variable scale to 0..255 void DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr) { if (var.memadr) { @@ -269,6 +212,103 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable dgusdisplay.WriteVariablePGM(var.VP, tmp, var.size, true); } +#if HAS_PID_HEATING + void DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var) { + float value = *(float *)var.memadr; + float valuesend = 0; + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_PID_P: valuesend = value; break; + case VP_E0_PID_I: valuesend = unscalePID_i(value); break; + case VP_E0_PID_D: valuesend = unscalePID_d(value); break; + #endif + #if HOTENDS >= 2 + case VP_E1_PID_P: valuesend = value; break; + case VP_E1_PID_I: valuesend = unscalePID_i(value); break; + case VP_E1_PID_D: valuesend = unscalePID_d(value); break; + #endif + #if HAS_HEATED_BED + case VP_BED_PID_P: valuesend = value; break; + case VP_BED_PID_I: valuesend = unscalePID_i(value); break; + case VP_BED_PID_D: valuesend = unscalePID_d(value); break; + #endif + } + + valuesend *= cpow(10, 1); + union { int16_t i; char lb[2]; } endian; + + char tmp[2]; + endian.i = valuesend; + tmp[0] = endian.lb[1]; + tmp[1] = endian.lb[0]; + dgusdisplay.WriteVariable(var.VP, tmp, 2); + } +#endif + +#if ENABLED(PRINTCOUNTER) + + // Send the accumulate print time to the display. + // It is using a hex display for that: It expects BSD coded data in the format xxyyzz + void DGUSScreenVariableHandler::DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var) { + printStatistics state = print_job_timer.getStats(); + char buf[21]; + duration_t elapsed = state.printTime; + elapsed.toString(buf); + dgusdisplay.WriteVariable(VP_PrintAccTime, buf, var.size, true); + } + + void DGUSScreenVariableHandler::DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var) { + printStatistics state = print_job_timer.getStats(); + char buf[21]; + sprintf_P(buf, PSTR("%u"), state.totalPrints); + dgusdisplay.WriteVariable(VP_PrintsTotal, buf, var.size, true); + } + +#endif + +// Send fan status value to the display. +#if FAN_COUNT > 0 + void DGUSScreenVariableHandler::DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + DEBUG_ECHOPAIR(" DGUSLCD_SendFanStatusToDisplay ", var.VP); + DEBUG_ECHOLNPAIR(" data ", *(uint8_t *)var.memadr); + uint16_t data_to_send = 0; + if (*(uint8_t *) var.memadr) data_to_send = 1; + data_to_send = swap16(data_to_send); + dgusdisplay.WriteVariable(var.VP, data_to_send); + } + } +#endif + +// Send heater status value to the display. +void DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + DEBUG_ECHOPAIR(" DGUSLCD_SendHeaterStatusToDisplay ", var.VP); + DEBUG_ECHOLNPAIR(" data ", *(int16_t *)var.memadr); + uint16_t data_to_send = 0; + if (*(int16_t *) var.memadr) data_to_send = 1; + data_to_send = swap16(data_to_send); + dgusdisplay.WriteVariable(var.VP, data_to_send); + } +} + +#if ENABLED(DGUS_UI_WAITING) + void DGUSScreenVariableHandler::DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var) { + // In FYSETC UI design there are 10 statuses to loop + static uint16_t period = 0; + static uint16_t index = 0; + //DEBUG_ECHOPAIR(" DGUSLCD_SendWaitingStatusToDisplay ", var.VP); + //DEBUG_ECHOLNPAIR(" data ", swap16(index)); + if (period++ > DGUS_UI_WAITING_STATUS_PERIOD) { + dgusdisplay.WriteVariable(var.VP, swap16(index)); + //DEBUG_ECHOLNPAIR(" data ", swap16(index)); + if (++index >= DGUS_UI_WAITING_STATUS) index = 0; + period = 0; + } + } +#endif + #if ENABLED(SDSUPPORT) void DGUSScreenVariableHandler::ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr) { @@ -289,26 +329,19 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable // Don't let the user in the dark why there is no reaction. if (!ExtUI::isMediaInserted()) { - setstatusmessagePGM(GET_TEXT(MSG_NO_MEDIA)); - return; + setstatusmessagePGM(GET_TEXT(MSG_NO_MEDIA)); + return; } if (card.flag.abort_sd_printing) { - setstatusmessagePGM(GET_TEXT(MSG_MEDIA_ABORTING)); - return; + setstatusmessagePGM(GET_TEXT(MSG_MEDIA_ABORTING)); + return; } } void DGUSScreenVariableHandler::DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable& var, void *val_ptr) { auto old_top = top_file; - int16_t scroll = (int16_t)swap16(*(uint16_t*)val_ptr); - if (scroll == 0) { - if (!filelist.isAtRootDir()) { - filelist.upDir(); - top_file = 0; - ForceCompleteUpdate(); - } - } - else { + const int16_t scroll = (int16_t)swap16(*(uint16_t*)val_ptr); + if (scroll) { top_file += scroll; DEBUG_ECHOPAIR("new topfile calculated:", top_file); if (top_file < 0) { @@ -322,6 +355,11 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable } DEBUG_ECHOPAIR("new topfile adjusted:", top_file); } + else if (!filelist.isAtRootDir()) { + filelist.upDir(); + top_file = 0; + ForceCompleteUpdate(); + } if (old_top != top_file) ForceCompleteUpdate(); } @@ -337,6 +375,11 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable return; } + #if ENABLED(DGUS_PRINT_FILENAME) + // Send print filename + dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), VP_SD_FileName_LEN, true); + #endif + // Setup Confirmation screen file_to_print = touched_nr; HandleUserConfirmationPopUp(VP_SD_FileSelectConfirm, nullptr, PSTR("Print file"), filelist.filename(), PSTR("from SD Card?"), true, true, false, true); @@ -344,8 +387,14 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable void DGUSScreenVariableHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) { if (!filelist.seek(file_to_print)) return; - ExtUI::printFile(filelist.filename()); - ScreenHandler.GotoScreen(DGUSLCD_SCREEN_STATUS); + ExtUI::printFile(filelist.shortFilename()); + ScreenHandler.GotoScreen( + #if ENABLED(DGUS_LCD_UI_ORIGIN) + DGUSLCD_SCREEN_STATUS + #else + DGUSLCD_SCREEN_SDPRINTMANIPULATION + #endif + ); } void DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) { @@ -368,6 +417,11 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable GotoScreen(DGUSLCD_SCREEN_MAIN); } + void DGUSScreenVariableHandler::DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr) { + if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes. + GotoScreen(DGUSLCD_SCREEN_SDPRINTTUNE); + } + void DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) { uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN; if (target_line > DGUS_SD_FILESPERSCREEN) return; @@ -456,7 +510,7 @@ void DGUSScreenVariableHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *va UpdateNewScreen(target); #ifdef DEBUG_DGUSLCD - if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", x); + if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", target); #endif } @@ -502,10 +556,10 @@ void DGUSScreenVariableHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, voi uint8_t target_extruder; switch (var.VP) { default: return; - #if (HOTENDS >= 1) + #if HOTENDS >= 1 case VP_Flowrate_E0: target_extruder = 0; break; #endif - #if (HOTENDS >= 2) + #if HOTENDS >= 2 case VP_Flowrate_E1: target_extruder = 1; break; #endif } @@ -519,7 +573,7 @@ void DGUSScreenVariableHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, voi } void DGUSScreenVariableHandler::HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr) { - DEBUG_ECHOLNPGM("HandleManualMove"); + DEBUG_ECHOLNPGM("HandleManualExtrude"); int16_t movevalue = swap16(*(uint16_t*)val_ptr); float target = movevalue * 0.01f; @@ -540,14 +594,27 @@ void DGUSScreenVariableHandler::HandleManualExtrude(DGUS_VP_Variable &var, void skipVP = var.VP; } +#if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + void DGUSScreenVariableHandler::HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleManualMoveOption"); + *(uint16_t*)var.memadr = swap16(*(uint16_t*)val_ptr); + } +#endif + void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) { DEBUG_ECHOLNPGM("HandleManualMove"); int16_t movevalue = swap16(*(uint16_t*)val_ptr); + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + const uint16_t choice = *(uint16_t*)var.memadr; + movevalue = movevalue > 0 ? choice : -choice; + #endif char axiscode; unsigned int speed = 1500; //FIXME: get default feedrate for manual moves, dont hardcode. switch (var.VP) { + default: return; + case VP_MOVE_X: axiscode = 'X'; if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove; @@ -568,8 +635,6 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va axiscode = '\0'; movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing. break; - - default: return; } if (!movevalue) { @@ -578,7 +643,7 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va char buf[6] = "G28 X"; buf[4] = axiscode; //DEBUG_ECHOPAIR(" ", buf); - while (!enqueue_and_echo_command(buf)) idle(); + queue.enqueue_one_now(buf); //DEBUG_ECHOLNPGM(" ✓"); ScreenHandler.ForceCompleteUpdate(); return; @@ -589,7 +654,7 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va bool old_relative_mode = relative_mode; if (!relative_mode) { //DEBUG_ECHOPGM(" G91"); - while (!enqueue_and_echo_command("G91")) idle(); + queue.enqueue_now_P(PSTR("G91")); //DEBUG_ECHOPGM(" ✓ "); } char buf[32]; // G1 X9999.99 F12345 @@ -600,18 +665,18 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va int16_t fraction = ABS(movevalue) % 100; snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed); //DEBUG_ECHOPAIR(" ", buf); - while (!enqueue_and_echo_command(buf)) idle(); + queue.enqueue_one_now(buf); //DEBUG_ECHOLNPGM(" ✓ "); if (backup_speed != speed) { snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed); - while (!enqueue_and_echo_command(buf)) idle(); + queue.enqueue_one_now(buf); //DEBUG_ECHOPAIR(" ", buf); } //while (!enqueue_and_echo_command(buf)) idle(); //DEBUG_ECHOLNPGM(" ✓ "); if (!old_relative_mode) { //DEBUG_ECHOPGM("G90"); - while (!enqueue_and_echo_command("G90")) idle(); + queue.enqueue_now_P(PSTR("G90")); //DEBUG_ECHOPGM(" ✓ "); } } @@ -625,6 +690,389 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va return; } +void DGUSScreenVariableHandler::HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleMotorLockUnlock"); + + char buf[4]; + const int16_t lock = swap16(*(uint16_t*)val_ptr); + strcpy_P(buf, lock ? PSTR("M18") : PSTR("M17")); + + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); +} + +#if ENABLED(POWER_LOSS_RECOVERY) + void DGUSScreenVariableHandler::HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t value = swap16(*(uint16_t*)val_ptr); + if (value) { + queue.inject_P(PSTR("M1000")); + ScreenHandler.GotoScreen(DGUSLCD_SCREEN_SDPRINTMANIPULATION); + } + else { + card.removeJobRecoveryFile(); + card.autostart_index = 0; + ScreenHandler.GotoScreen(DGUSLCD_SCREEN_STATUS); + } + } +#endif + +void DGUSScreenVariableHandler::HandleSettings(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleSettings"); + uint16_t value = swap16(*(uint16_t*)val_ptr); + switch (value) { + default: break; + case 1: + #if ENABLED(PRINTCOUNTER) + print_job_timer.initStats(); + #endif + queue.enqueue_now_P(PSTR("M502\nM500")); + break; + case 2: queue.enqueue_now_P(PSTR("M501")); break; + case 3: queue.enqueue_now_P(PSTR("M500")); break; + } +} + +void DGUSScreenVariableHandler::HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleStepPerMMChanged"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw/10; + ExtUI::axis_t axis; + switch (var.VP) { + case VP_X_STEP_PER_MM: axis = ExtUI::axis_t::X; break; + case VP_Y_STEP_PER_MM: axis = ExtUI::axis_t::Y; break; + case VP_Z_STEP_PER_MM: axis = ExtUI::axis_t::Z; break; + default: return; + } + DEBUG_ECHOLNPAIR_F("value:", value); + ExtUI::setAxisSteps_per_mm(value, axis); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(axis)); + ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleStepPerMMExtruderChanged"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw/10; + ExtUI::extruder_t extruder; + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_STEP_PER_MM: extruder = ExtUI::extruder_t::E0; break; + #endif + #if HOTENDS >= 2 + case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break; + #endif + } + DEBUG_ECHOLNPAIR_F("value:", value); + ExtUI::setAxisSteps_per_mm(value,extruder); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(extruder)); + ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +#if HAS_PID_HEATING + void DGUSScreenVariableHandler::HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t rawvalue = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("V1:", rawvalue); + float value = (float)rawvalue / 10; + DEBUG_ECHOLNPAIR("V2:", value); + float newvalue = 0; + + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_PID_P: newvalue = value; break; + case VP_E0_PID_I: newvalue = scalePID_i(value); break; + case VP_E0_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HOTENDS >= 2 + case VP_E1_PID_P: newvalue = value; break; + case VP_E1_PID_I: newvalue = scalePID_i(value); break; + case VP_E1_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HAS_HEATED_BED + case VP_BED_PID_P: newvalue = value; break; + case VP_BED_PID_I: newvalue = scalePID_i(value); break; + case VP_BED_PID_D: newvalue = scalePID_d(value); break; + #endif + } + + DEBUG_ECHOLNPAIR_F("V3:", newvalue); + *(float *)var.memadr = newvalue; + ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + } + + void DGUSScreenVariableHandler::HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandlePIDAutotune"); + + char buf[32] = {0}; + + switch (var.VP) { + default: break; + #if ENABLED(PIDTEMP) + #if HOTENDS >= 1 + case VP_PID_AUTOTUNE_E0: // Autotune Extruder 0 + sprintf(buf, "M303 E%d C5 S210 U1", ExtUI::extruder_t::E0); + break; + #endif + #if HOTENDS >= 2 + case VP_PID_AUTOTUNE_E1: + sprintf(buf, "M303 E%d C5 S210 U1", ExtUI::extruder_t::E1); + break; + #endif + #endif + #if ENABLED(PIDTEMPBED) + case VP_PID_AUTOTUNE_BED: + sprintf(buf, "M303 E-1 C5 S70 U1"); + break; + #endif + } + + if (buf[0]) queue.enqueue_one_now(buf); + + #if ENABLED(DGUS_UI_WAITING) + sendinfoscreen(PSTR("PID is autotuning"), PSTR("please wait"), NUL_STR, NUL_STR, true, true, true, true); + GotoScreen(DGUSLCD_SCREEN_WAITING); + #endif + } +#endif + +void DGUSScreenVariableHandler::HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleProbeOffsetZChanged"); + + uint16_t value = swap16(*(uint16_t*)val_ptr)/100; + ExtUI::setZOffset_mm(value); + ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +#if ENABLED(BABYSTEPPING) + void DGUSScreenVariableHandler::HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleLiveAdjustZ"); + + int16_t flag = swap16(*(uint16_t*)val_ptr); + int16_t steps = flag ? -20 : 20; + ExtUI::smartAdjustAxis_steps(steps,ExtUI::axis_t::Z,true); + ScreenHandler.ForceCompleteUpdate(); + return; + } +#endif + +#if FAN_COUNT + void DGUSScreenVariableHandler::HandleFanControl(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleFanControl"); + *(uint8_t*)var.memadr = *(uint8_t*)var.memadr > 0 ? 0 : 255; + } +#endif + +void DGUSScreenVariableHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleHeaterControl"); + + uint8_t preheat_temp = 0; + switch (var.VP) { + #if HOTENDS >= 1 + case VP_E0_CONTROL: + #endif + #if HOTENDS >= 2 + case VP_E1_CONTROL: + #endif + #if HOTENDS >= 3 + case VP_E2_CONTROL: + #endif + preheat_temp = PREHEAT_1_TEMP_HOTEND; + break; + + case VP_BED_CONTROL: + preheat_temp = PREHEAT_1_TEMP_BED; + break; + } + + *(int16_t*)var.memadr = *(int16_t*)var.memadr > 0 ? 0 : preheat_temp; +} + +#if ENABLED(DGUS_PREHEAT_UI) + void DGUSScreenVariableHandler::HandlePreheat(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandlePreheat"); + + uint8_t e_temp = 0; + uint8_t bed_temp = 0; + const uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); + switch (preheat_option) { + case 0: // Preheat PLA + #if defined(PREHEAT_1_TEMP_HOTEND) && defined(PREHEAT_1_TEMP_BED) + e_temp = PREHEAT_1_TEMP_HOTEND; + bed_temp = PREHEAT_1_TEMP_BED; + #endif + break; + case 1: // Preheat ABS + #if defined(PREHEAT_2_TEMP_HOTEND) && defined(PREHEAT_2_TEMP_BED) + e_temp = PREHEAT_2_TEMP_HOTEND; + bed_temp = PREHEAT_2_TEMP_BED; + #endif + break; + case 2: // Preheat PET + #if defined(PREHEAT_3_TEMP_HOTEND) && defined(PREHEAT_3_TEMP_BED) + e_temp = PREHEAT_3_TEMP_HOTEND; + bed_temp = PREHEAT_3_TEMP_BED; + #endif + break; + case 3: // Preheat FLEX + #if defined(PREHEAT_4_TEMP_HOTEND) && defined(PREHEAT_4_TEMP_BED) + e_temp = PREHEAT_4_TEMP_HOTEND; + bed_temp = PREHEAT_4_TEMP_BED; + #endif + break; + case 7: // Custom preheat + break; + case 9: // Cool down + e_temp = 0; + bed_temp = 0; + break; + default: + #if defined(PREHEAT_1_TEMP_HOTEND) && defined(PREHEAT_1_TEMP_BED) + e_temp = PREHEAT_1_TEMP_HOTEND; + bed_temp = PREHEAT_1_TEMP_BED; + #endif + break; + } + + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_BED_PREHEAT: + thermalManager.setTargetHotend(e_temp, 0); + #if HAS_HEATED_BED + thermalManager.setTargetBed(bed_temp); + #endif + break; + #endif + #if HOTENDS >= 2 + case VP_E1_BED_PREHEAT: + thermalManager.setTargetHotend(e_temp, 1); + #if HAS_HEATED_BED + thermalManager.setTargetBed(bed_temp); + #endif + break; + #endif + } + + // Go to the preheat screen to show the heating progress + GotoScreen(DGUSLCD_SCREEN_PREHEAT); + } +#endif + +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + void DGUSScreenVariableHandler::HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleFilamentOption"); + + uint8_t e_temp = 0; + filament_data.heated = false; + uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); + if (preheat_option <= 8) // Load filament type + filament_data.action = 1; + else if (preheat_option >= 10) { // Unload filament type + preheat_option -= 10; + filament_data.action = 2; + filament_data.purge_length = DGUS_FILAMENT_PURGE_LENGTH; + } + else // Cancel filament operation + filament_data.action = 0; + + switch (preheat_option) { + case 0: // Load PLA + #ifdef PREHEAT_1_TEMP_HOTEND + e_temp = PREHEAT_1_TEMP_HOTEND; + #endif + break; + case 1: // Load ABS + #if ENABLED(PREHEAT_2_TEMP_HOTEND) + e_temp = PREHEAT_2_TEMP_HOTEND; + #endif + break; + case 2: // Load PET + #ifdef PREHEAT_3_TEMP_HOTEND + e_temp = PREHEAT_3_TEMP_HOTEND; + #endif + break; + case 3: // Load FLEX + #ifdef PREHEAT_4_TEMP_HOTEND + e_temp = PREHEAT_4_TEMP_HOTEND; + #endif + break; + case 9: // Cool down + default: + e_temp = 0; + break; + } + + if (filament_data.action == 0) { // Go back to utility screen + #if HOTENDS >= 1 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0); + #endif + #if HOTENDS >= 2 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1); + #endif + GotoScreen(DGUSLCD_SCREEN_UTILITY); + } + else { // Go to the preheat screen to show the heating progress + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E0; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + #if HOTENDS >= 2 + case VP_E1_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E1; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + } + GotoScreen(DGUSLCD_SCREEN_FILAMENT_HEATING); + } + } + + void DGUSScreenVariableHandler::HandleFilamentLoadUnload(DGUS_VP_Variable &var) { + DEBUG_ECHOLNPGM("HandleFilamentLoadUnload"); + if (filament_data.action <= 0) return; + + // If we close to the target temperature, we can start load or unload the filament + if (thermalManager.hotEnoughToExtrude(filament_data.extruder) && \ + thermalManager.targetHotEnoughToExtrude(filament_data.extruder)) { + float movevalue = DGUS_FILAMENT_LOAD_LENGTH_PER_TIME; + + if (filament_data.action == 1) { // load filament + if (!filament_data.heated) { + GotoScreen(DGUSLCD_SCREEN_FILAMENT_LOADING); + filament_data.heated = true; + } + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder)+movevalue; + } + else { // unload filament + if (!filament_data.heated) { + GotoScreen(DGUSLCD_SCREEN_FILAMENT_UNLOADING); + filament_data.heated = true; + } + // Before unloading extrude to prevent jamming + if (filament_data.purge_length >= 0) { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + filament_data.purge_length -= movevalue; + } + else + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) - movevalue; + } + ExtUI::setAxisPosition_mm(movevalue, filament_data.extruder); + } + } +#endif + void DGUSScreenVariableHandler::UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup) { DEBUG_ECHOLNPAIR("SetNewScreen: ", newscreen); @@ -655,7 +1103,7 @@ void DGUSScreenVariableHandler::UpdateScreenVPData() { return; // nothing to do, likely a bug or boring screen. } - // Round-Robbin updating of all VPs. + // Round-robin updating of all VPs. VPList += update_ptr; bool sent_one = false; @@ -669,15 +1117,12 @@ void DGUSScreenVariableHandler::UpdateScreenVPData() { return; // Screen completed. } - if (VP == skipVP) { - skipVP = 0; - continue; - } + if (VP == skipVP) { skipVP = 0; continue; } DGUS_VP_Variable rcpy; if (populate_VPVar(VP, &rcpy)) { uint8_t expected_tx = 6 + rcpy.size; // expected overhead is 6 bytes + payload. - // Send the VP to the display, but try to avoid overruning the Tx Buffer. + // Send the VP to the display, but try to avoid overrunning the Tx Buffer. // But send at least one VP, to avoid getting stalled. if (rcpy.send_to_display_handler && (!sent_one || expected_tx <= dgusdisplay.GetFreeTxBuffer())) { //DEBUG_ECHOPAIR(" calling handler for ", rcpy.VP); @@ -697,7 +1142,7 @@ void DGUSScreenVariableHandler::UpdateScreenVPData() { } void DGUSDisplay::loop() { - // protection against recursion… ProcessRx() might call indirectly idle() when trying to injecting gcode commands if the queue is full. + // protect against recursion… ProcessRx() may indirectly call idle() when injecting gcode commands. if (!no_reentrance) { no_reentrance = true; ProcessRx(); @@ -706,18 +1151,25 @@ void DGUSDisplay::loop() { } void DGUSDisplay::InitDisplay() { - RequestScreen( - #if ENABLED(SHOW_BOOTSCREEN) - DGUSLCD_SCREEN_BOOT - #else - DGUSLCD_SCREEN_MAIN + dgusserial.begin(DGUS_BAUDRATE); + + if (true + #if ENABLED(POWER_LOSS_RECOVERY) + && !recovery.valid() #endif - ); + ) + RequestScreen( + #if ENABLED(SHOW_BOOTSCREEN) + DGUSLCD_SCREEN_BOOT + #else + DGUSLCD_SCREEN_MAIN + #endif + ); } void DGUSDisplay::WriteVariable(uint16_t adr, const void* values, uint8_t valueslen, bool isstr) { const char* myvalues = static_cast(values); - bool strend = myvalues ? false : true; + bool strend = !myvalues; WriteHeader(adr, DGUS_CMD_WRITEVAR, valueslen); while (valueslen--) { char x; @@ -732,7 +1184,7 @@ void DGUSDisplay::WriteVariable(uint16_t adr, const void* values, uint8_t values void DGUSDisplay::WriteVariablePGM(uint16_t adr, const void* values, uint8_t valueslen, bool isstr) { const char* myvalues = static_cast(values); - bool strend = myvalues ? false : true; + bool strend = !myvalues; WriteHeader(adr, DGUS_CMD_WRITEVAR, valueslen); while (valueslen--) { char x; @@ -763,6 +1215,9 @@ bool DGUSScreenVariableHandler::loop() { #if ENABLED(SHOW_BOOTSCREEN) static bool booted = false; + #if ENABLED(POWER_LOSS_RECOVERY) + if (!booted && recovery.valid()) booted = true; + #endif if (!booted && ELAPSED(ms, BOOTSCREEN_TIMEOUT)) { booted = true; GotoScreen(DGUSLCD_SCREEN_MAIN); @@ -779,13 +1234,16 @@ void DGUSDisplay::RequestScreen(DGUSLCD_Screens screen) { void DGUSDisplay::ProcessRx() { - if (!dgusserial.available() && dgusserial.is_rx_overrun()) { - // if we've got an overrun, but reset the flag only when we've emptied the buffer - // We want to extract as many as valid datagrams possible... - DEBUG_ECHOPGM("OVFL"); - rx_datagram_state = DGUS_IDLE; - dgusserial.reset_rx_overun(); - } + #if ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS) + if (!dgusserial.available() && dgusserial.buffer_overruns()) { + // Overrun, but reset the flag only when the buffer is empty + // We want to extract as many as valid datagrams possible... + DEBUG_ECHOPGM("OVFL"); + rx_datagram_state = DGUS_IDLE; + //dgusserial.reset_rx_overun(); + dgusserial.flush(); + } + #endif uint8_t receivedbyte; while (dgusserial.available()) { @@ -805,8 +1263,7 @@ void DGUSDisplay::ProcessRx() { case DGUS_HEADER2_SEEN: // Waiting for the length byte rx_datagram_len = dgusserial.read(); - DEBUG_ECHOPAIR(" (", rx_datagram_len); - DEBUG_ECHOPGM(") "); + DEBUG_ECHOPAIR(" (", rx_datagram_len, ") "); // Telegram min len is 3 (command and one word of payload) rx_datagram_state = WITHIN(rx_datagram_len, 3, DGUS_RX_BUFFER_SIZE) ? DGUS_WAIT_TELEGRAM : DGUS_IDLE; @@ -864,13 +1321,13 @@ void DGUSDisplay::ProcessRx() { break; } - // discard what we do not understand. + // discard anything else rx_datagram_state = DGUS_IDLE; } } } -size_t DGUSDisplay::GetFreeTxBuffer() { return dgusserial.GetTxBufferFree(); } +size_t DGUSDisplay::GetFreeTxBuffer() { return DGUS_SERIAL_GET_TX_BUFFER_FREE(); } void DGUSDisplay::WriteHeader(uint16_t adr, uint8_t cmd, uint8_t payloadlen) { dgusserial.write(DGUS_HEADER1); @@ -885,210 +1342,7 @@ void DGUSDisplay::WritePGM(const char str[], uint8_t len) { while (len--) dgusserial.write(pgm_read_byte(str++)); } -// Serial implementation stolen from MarlinSerial.cpp -- but functinality reduced to our use case -// (no XON/XOFF, no Emergency Parser, no error statistics, no support to send from interrupts ...) - -// Define all UART registers -#define _TNAME(X,Y,Z) X##Y##Z -#define TNAME(X,Y,Z) _TNAME(X,Y,Z) -#define DGUS_SERIAL_RX_VECT TNAME(USART,DGUS_SER_PORT,_RX_vect) -#define DGUS_SERIAL_UDRE_VECT TNAME(USART,DGUS_SER_PORT,_UDRE_vect) -#define DGUS_UCSRxA TNAME(UCSR,DGUS_SER_PORT,A) -#define DGUS_UCSRxB TNAME(UCSR,DGUS_SER_PORT,B) -#define DGUS_UCSRxC TNAME(UCSR,DGUS_SER_PORT,C) -#define DGUS_UBRRxH TNAME(UBRR,DGUS_SER_PORT,H) -#define DGUS_UBRRxL TNAME(UBRR,DGUS_SER_PORT,L) -#define DGUS_UDRx TNAME(UDR,DGUS_SER_PORT,) - -#define U2Xx TNAME(U2X,DGUS_SER_PORT,) -#define RXENx TNAME(RXEN,DGUS_SER_PORT,) -#define TXENx TNAME(TXEN,DGUS_SER_PORT,) -#define TXCx TNAME(TXC,DGUS_SER_PORT,) -#define RXCIEx TNAME(RXCIE,DGUS_SER_PORT,) -#define UDRIEx TNAME(UDRIE,DGUS_SER_PORT,) -#define UDREx TNAME(UDRE,DGUS_SER_PORT,) - // A SW memory barrier, to ensure GCC does not overoptimize loops #define sw_barrier() asm volatile("": : :"memory"); -DGUSSerial::DGUSSerial() { - // Initialize UART - DGUS_UCSRxA = 1 << U2Xx; - const uint16_t baud_setting = (F_CPU / 4 / DGUS_BAUDRATE - 1) / 2; - DGUS_UBRRxH = baud_setting >> 8; - DGUS_UBRRxL = baud_setting; - DGUS_UCSRxC = 0x06; - DGUS_UCSRxB = 1 << RXCIEx | 1 << TXENx | 1 << RXENx; // Enable TX,RX and the RX interrupts. -} - -DGUSSerial::~DGUSSerial() { DGUS_UCSRxB = 0; } - -// "Atomically" read the RX head index value without disabling interrupts: -// This MUST be called with RX interrupts enabled, and CAN'T be called -// from the RX ISR itself! -FORCE_INLINE r_ring_buffer_pos_t DGUSSerial::atomic_read_rx_head() { - #if RX_BUFFER_SIZE > 256 - // Keep reading until 2 consecutive reads return the same value, - // meaning there was no update in-between caused by an interrupt. - // This works because serial RX interrupts happen at a slower rate - // than successive reads of a variable, so 2 consecutive reads with - // the same value means no interrupt updated it. - r_ring_buffer_pos_t vold, vnew = rx_buffer.head; - sw_barrier(); - do { - vold = vnew; - vnew = rx_buffer.head; - sw_barrier(); - } while (vold != vnew); - return vnew; - #else - // With an 8bit index, reads are always atomic. No need for special handling - return rx_buffer.head; - #endif -} - -// Set RX tail index, taking into account the RX ISR could interrupt -// the write to this variable in the middle - So a backup strategy -// is used to ensure reads of the correct values. -// -Must NOT be called from the RX ISR - -FORCE_INLINE void DGUSSerial::atomic_set_rx_tail(r_ring_buffer_pos_t value) { - #if RX_BUFFER_SIZE > 256 - // Store the new value in the backup - rx_tail_value_backup = value; - sw_barrier(); - // Flag we are about to change the true value - rx_tail_value_not_stable = true; - sw_barrier(); - // Store the new value - rx_buffer.tail = value; - sw_barrier(); - // Signal the new value is completely stored into the value - rx_tail_value_not_stable = false; - sw_barrier(); - #else - rx_buffer.tail = value; - #endif -} - -// Get the RX tail index, taking into account the read could be -// interrupting in the middle of the update of that index value -// -Called from the RX ISR - -FORCE_INLINE r_ring_buffer_pos_t DGUSSerial::atomic_read_rx_tail() { - #if RX_BUFFER_SIZE > 256 - // If the true index is being modified, return the backup value - if (rx_tail_value_not_stable) return rx_tail_value_backup; - #endif - // The true index is stable, return it - return rx_buffer.tail; -} - -// (called with RX interrupts disabled) -FORCE_INLINE void DGUSSerial::store_rxd_char() { - // Get the tail - Nothing can alter its value while this ISR is executing, but there's - // a chance that this ISR interrupted the main process while it was updating the index. - // The backup mechanism ensures the correct value is always returned. - const r_ring_buffer_pos_t t = atomic_read_rx_tail(); - - // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here - r_ring_buffer_pos_t h = rx_buffer.head; - - // Get the next element - r_ring_buffer_pos_t i = (r_ring_buffer_pos_t) (h + 1) & (r_ring_buffer_pos_t) (DGUS_RX_BUFFER_SIZE - 1); - - // Read the character from the USART - uint8_t c = DGUS_UDRx; - - // If the character is to be stored at the index just before the tail - // (such that the head would advance to the current tail), the RX FIFO is - // full, so don't write the character or advance the head. - if (i != t) { - rx_buffer.buffer[h] = c; - h = i; - } - else - dgus_rx_overrun = true; - - // Store the new head value - The main loop will retry until the value is stable - rx_buffer.head = h; -} - -// (called with TX irqs disabled) -FORCE_INLINE void DGUSSerial::tx_udr_empty_irq() { - // Read positions - uint8_t t = tx_buffer.tail; - const uint8_t h = tx_buffer.head; - // If nothing to transmit, just disable TX interrupts. This could - // happen as the result of the non atomicity of the disabling of RX - // interrupts that could end reenabling TX interrupts as a side effect. - if (h == t) { - CBI(DGUS_UCSRxB, UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed) - return; - } - - // There is something to TX, Send the next byte - const uint8_t c = tx_buffer.buffer[t]; - t = (t + 1) & (DGUS_TX_BUFFER_SIZE - 1); - DGUS_UDRx = c; - tx_buffer.tail = t; - - // Clear the TXC bit (by writing a one to its bit location). - // Ensures flush() won't return until the bytes are actually written/ - SBI(DGUS_UCSRxA, TXCx); - - // Disable interrupts if there is nothing to transmit following this byte - if (h == t) CBI(DGUS_UCSRxB, UDRIEx); -} - -r_ring_buffer_pos_t DGUSSerial::available() { - const r_ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail; - return (r_ring_buffer_pos_t) (DGUS_RX_BUFFER_SIZE + h - t) & (DGUS_RX_BUFFER_SIZE - 1); -} - -int DGUSSerial::read() { - const r_ring_buffer_pos_t h = atomic_read_rx_head(); - - // Read the tail. Main thread owns it, so it is safe to directly read it - r_ring_buffer_pos_t t = rx_buffer.tail; - - // If nothing to read, return now - if (h == t) return -1; - - // Get the next char - const int v = rx_buffer.buffer[t]; - t = (r_ring_buffer_pos_t) (t + 1) & (DGUS_RX_BUFFER_SIZE - 1); - - // Advance tail - Making sure the RX ISR will always get an stable value, even - // if it interrupts the writing of the value of that variable in the middle. - atomic_set_rx_tail(t); - return v; -} - -void DGUSSerial::write(const uint8_t c) { - // are we currently tranmitting? If not, we can just place the byte in UDR. - if (!TEST(DGUS_UCSRxB, UDRIEx) && TEST(DGUS_UCSRxA, UDREx)) { - DGUS_UDRx = c; - SBI(DGUS_UCSRxA, TXCx); - return; - } - - const uint8_t i = (tx_buffer.head + 1) & (DGUS_TX_BUFFER_SIZE - 1); - while (i == tx_buffer.tail) sw_barrier(); - - // Store new char. head is always safe to move - tx_buffer.buffer[tx_buffer.head] = c; - tx_buffer.head = i; - SBI(DGUS_UCSRxB, UDRIEx); // Enable Interrupts to finish off. -} - -t_ring_buffer_pos_t DGUSSerial::GetTxBufferFree() { - const t_ring_buffer_pos_t t = tx_buffer.tail, // next byte to send. - h = tx_buffer.head; // next pos for queue. - int ret = t - h - 1; - if (ret < 0) ret += DGUS_TX_BUFFER_SIZE + 1; - return ret; -} - -ISR(DGUS_SERIAL_UDRE_VECT) { dgusserial.tx_udr_empty_irq(); } -ISR(DGUS_SERIAL_RX_VECT) { dgusserial.store_rxd_char(); } - -#endif // DGUS_LCD +#endif // HAS_DGUS_LCD diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h index 91a92c7482..3247a5e3e6 100644 --- a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h @@ -116,10 +116,52 @@ public: static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr); // Hook for "Change Flowrate" static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + // Hook for manual move option + static void HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr); + #endif // Hook for manual move. static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr); // Hook for manual extrude. static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr); + // Hook for motor lock and unlook + static void HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(POWER_LOSS_RECOVERY) + // Hook for power loss recovery. + static void HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for settings + static void HandleSettings(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr); + #if HAS_PID_HEATING + // Hook for "Change this temperature PID para" + static void HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for PID autotune + static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for "Change probe offset z" + static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(BABYSTEPPING) + // Hook for live z adjust action + static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if FAN_COUNT > 0 + // Hook for fan control + static void HandleFanControl(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for heater control + static void HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_PREHEAT_UI) + // Hook for preheat + static void HandlePreheat(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + // Hook for filament load and unload filament option + static void HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr); + // Hook for filament load and unload + static void HandleFilamentLoadUnload(DGUS_VP_Variable &var); + #endif #if ENABLED(SDSUPPORT) // Callback for VP "Display wants to change screen when there is a SD card" @@ -134,6 +176,8 @@ public: static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr); /// User confirmed the abort action static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr); + /// User hit the tune button + static void DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr); /// Send a single filename to the display. static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var); /// Marlin informed us that a new SD has been inserted. @@ -164,8 +208,20 @@ public: static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var); static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var); static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var); + static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var); static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var); static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var); + #if ENABLED(PRINTCOUNTER) + static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var); + #endif + #if FAN_COUNT > 0 + static void DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var); + #endif + static void DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var); + #if ENABLED(DGUS_UI_WAITING) + static void DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var); + #endif /// Send a value from 0..100 to a variable with a range from 0..255 static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr); @@ -199,6 +255,25 @@ public: } } + /// Send a float value to the display. + /// Display will get a 2-byte integer scaled to the number of digits: + /// Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsIntValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + DEBUG_ECHOLNPAIR_F(" >> ", f, 6); + f *= cpow(10, decimals); + union { int16_t i; char lb[2]; } endian; + + char tmp[2]; + endian.i = f; + tmp[0] = endian.lb[1]; + tmp[1] = endian.lb[0]; + dgusdisplay.WriteVariable(var.VP, tmp, 2); + } + } + /// Force an update of all VP on the current screen. static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; } /// Has all VPs sent to the screen diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h index f90cfa948b..b79ea2cff6 100644 --- a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h @@ -38,155 +38,13 @@ struct VPMapping { extern const struct VPMapping VPMap[]; -enum DGUSLCD_Screens : uint8_t { - DGUSLCD_SCREEN_BOOT = 0, - DGUSLCD_SCREEN_MAIN = 10, - DGUSLCD_SCREEN_TEMPERATURE = 20, - DGUSLCD_SCREEN_STATUS = 30, - DGUSLCD_SCREEN_STATUS2 = 32, - DGUSLCD_SCREEN_MANUALMOVE = 40, - DGUSLCD_SCREEN_MANUALEXTRUDE=42, - DGUSLCD_SCREEN_FANANDFEEDRATE = 44, - DGUSLCD_SCREEN_FLOWRATES = 46, - DGUSLCD_SCREEN_SDFILELIST = 50, - DGUSLCD_SCREEN_SDPRINTMANIPULATION = 52, - DGUSLCD_SCREEN_CONFIRM = 240, - DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version") - DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen" - DGUSLDC_SCREEN_UNUSED = 255 -}; - -// Display Memory layout used (T5UID) -// Except system variables this is arbitrary, just to organize stuff.... - -// 0x0000 .. 0x0FFF -- System variables and reserved by the display -// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version -// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action) -// 0x3000 .. 0x4FFF -- Marlin Data to be displayed -// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused - -// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight, -// so that we can keep variables nicely together in the address space. - -// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out. -constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible -constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible -constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality. -constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd. - -// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup. -constexpr uint16_t VP_MSGSTR1 = 0x1100; -constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... -constexpr uint16_t VP_MSGSTR2 = 0x1140; -constexpr uint8_t VP_MSGSTR2_LEN = 0x20; -constexpr uint16_t VP_MSGSTR3 = 0x1180; -constexpr uint8_t VP_MSGSTR3_LEN = 0x20; -constexpr uint16_t VP_MSGSTR4 = 0x11C0; -constexpr uint8_t VP_MSGSTR4_LEN = 0x20; - -// Screenchange request for screens that only make sense when printer is idle. -// e.g movement is only allowed if printer is not printing. -// Marlin must confirm by setting the screen manually. -constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000; -constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. -constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)= -constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card. - -constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen. - -// Buttons on the SD-Card File listing. -constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down -constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected. -constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) - -constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints -constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog) - -// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values -// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support) -// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us -// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm. -constexpr uint16_t VP_MOVE_X = 0x2100; -constexpr uint16_t VP_MOVE_Y = 0x2102; -constexpr uint16_t VP_MOVE_Z = 0x2104; -constexpr uint16_t VP_MOVE_E0 = 0x2110; -constexpr uint16_t VP_MOVE_E1 = 0x2112; -//constexpr uint16_t VP_MOVE_E2 = 0x2114; -//constexpr uint16_t VP_MOVE_E3 = 0x2116; -//constexpr uint16_t VP_MOVE_E4 = 0x2118; -//constexpr uint16_t VP_MOVE_E5 = 0x211A; -constexpr uint16_t VP_HOME_ALL = 0x2120; - -// Firmware version on the boot screen. -constexpr uint16_t VP_MARLIN_VERSION = 0x3000; -constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. - -// Place for status messages. -constexpr uint16_t VP_M117 = 0x3020; -constexpr uint8_t VP_M117_LEN = 0x20; - -// Temperatures. -constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer -constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer -constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer - -// reserved to support up to 6 Extruders: -//constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer -//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer -//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer -//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer -//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer -//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer -//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer -//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer -//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer -//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer -//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer - -constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer -constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer - -constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer -constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer - -// reserved for up to 6 Extruders: -//constexpr uint16_t VP_Flowrate_E2 = 0x3094; -//constexpr uint16_t VP_Flowrate_E3 = 0x3096; -//constexpr uint16_t VP_Flowrate_E4 = 0x3098; -//constexpr uint16_t VP_Flowrate_E5 = 0x309A; - -constexpr uint16_t VP_Fan_Percentage = 0x3100; // 2 Byte Integer (0..100) -constexpr uint16_t VP_Feedrate_Percentage = 0x3102; // 2 Byte Integer (0..100) -constexpr uint16_t VP_PrintProgress_Percentage = 0x3104; // 2 Byte Integer (0..100) - -constexpr uint16_t VP_PrintTime = 0x3106; -constexpr uint16_t VP_PrintTime_LEN = 10; - -// Actual Position -constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy -constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy -constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy - -constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy - -// SDCard File Listing -constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. -constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there. -constexpr uint16_t VP_SD_FileName0 = 0x3200; -constexpr uint16_t VP_SD_FileName1 = 0x3220; -constexpr uint16_t VP_SD_FileName2 = 0x3240; -constexpr uint16_t VP_SD_FileName3 = 0x3260; -constexpr uint16_t VP_SD_FileName4 = 0x3280; - -// SPs for certain variables... -// located at 0x5000 and up -// Not used yet! -// This can be used e.g to make controls / data display invisible -constexpr uint16_t SP_T_E0_Is = 0x5000; -constexpr uint16_t SP_T_E0_Set = 0x5010; -constexpr uint16_t SP_T_E1_Is = 0x5020; -constexpr uint16_t SP_T_Bed_Is = 0x5030; -constexpr uint16_t SP_T_Bed_Set = 0x5040; - // List of VPs handled by Marlin / The Display. extern const struct DGUS_VP_Variable ListOfVP[]; + +#if ENABLED(DGUS_LCD_UI_ORIGIN) + #include "DGUSDisplayDefinitionOrigin.h" +#elif ENABLED(DGUS_LCD_UI_FYSETC) + #include "DGUSDisplayDefinitionFYSETC.h" +#elif ENABLED(DGUS_LCD_UI_HIPRECY) + #include "DGUSDisplayDefinitionHIPRECY.h" +#endif diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.cpp b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.cpp new file mode 100644 index 0000000000..4d953b88c8 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.cpp @@ -0,0 +1,476 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* DGUS VPs changed by George Fu in 2019 for Marlin */ + +#include "../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_FYSETC) + +#include "DGUSDisplayDefinition.h" +#include "DGUSDisplay.h" + +#include "../../../../module/temperature.h" +#include "../../../../module/motion.h" +#include "../../../../module/planner.h" + +#include "../../ui_api.h" +#include "../../../ultralcd.h" + +#if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + uint16_t distanceToMove = 0.1; +#endif + +const uint16_t VPList_Boot[] PROGMEM = { + VP_MARLIN_VERSION, + 0x0000 +}; + +const uint16_t VPList_Main[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded. */ + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS, + #endif + #if FAN_COUNT > 0 + VP_Fan0_Percentage, VP_FAN0_STATUS, + #endif + VP_XPos, VP_YPos, VP_ZPos, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + VP_PrintProgress_Percentage, + #endif + 0x0000 +}; + +const uint16_t VPList_Temp[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_Status[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded */ + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + #if FAN_COUNT > 0 + VP_Fan0_Percentage, + #endif + VP_XPos, VP_YPos, VP_ZPos, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + VP_PrintProgress_Percentage, + 0x0000 +}; + +const uint16_t VPList_Status2[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded */ + #if HOTENDS >= 1 + VP_Flowrate_E0, + #endif + #if HOTENDS >= 2 + VP_Flowrate_E1, + #endif + VP_PrintProgress_Percentage, + VP_PrintTime, + 0x0000 +}; + +const uint16_t VPList_Preheat[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_ManualMove[] PROGMEM = { + VP_XPos, VP_YPos, VP_ZPos, + 0x0000 +}; + +const uint16_t VPList_ManualExtrude[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + VP_EPos, + 0x0000 +}; + +const uint16_t VPList_FanAndFeedrate[] PROGMEM = { + VP_Feedrate_Percentage, VP_Fan0_Percentage, + 0x0000 +}; + +const uint16_t VPList_SD_FlowRates[] PROGMEM = { + VP_Flowrate_E0, VP_Flowrate_E1, + 0x0000 +}; + +const uint16_t VPList_Filament_heating[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + VP_E0_FILAMENT_LOAD_UNLOAD, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + VP_E1_FILAMENT_LOAD_UNLOAD, + #endif + 0x0000 +}; + +const uint16_t VPList_Filament_load_unload[] PROGMEM = { + #if HOTENDS >= 1 + VP_E0_FILAMENT_LOAD_UNLOAD, + #endif + #if HOTENDS >= 2 + VP_E1_FILAMENT_LOAD_UNLOAD, + #endif + 0x0000 +}; + +const uint16_t VPList_SDFileList[] PROGMEM = { + VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4, + 0x0000 +}; + +const uint16_t VPList_SD_PrintManipulation[] PROGMEM = { + VP_PrintProgress_Percentage, VP_PrintTime, + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + #if FAN_COUNT > 0 + VP_Fan0_Percentage, + #if FAN_COUNT > 1 + VP_Fan1_Percentage, + #endif + #endif + VP_Flowrate_E0, + 0x0000 +}; + +const uint16_t VPList_SDPrintTune[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, VP_Flowrate_E0, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, VP_Flowrate_E1, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + VP_Feedrate_Percentage, + 0x0000 +}; + +const uint16_t VPList_StepPerMM[] PROGMEM = { + VP_X_STEP_PER_MM, + VP_Y_STEP_PER_MM, + VP_Z_STEP_PER_MM, + #if HOTENDS >= 1 + VP_E0_STEP_PER_MM, + #endif + #if HOTENDS >= 2 + VP_E1_STEP_PER_MM, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDE0[] PROGMEM = { + #if ENABLED(PIDTEMP) + VP_E0_PID_P, + VP_E0_PID_I, + VP_E0_PID_D, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDBED[] PROGMEM = { + #if ENABLED(PIDTEMP) + VP_BED_PID_P, + VP_BED_PID_I, + VP_BED_PID_D, + #endif + 0x0000 +}; + +const uint16_t VPList_Infos[] PROGMEM = { + VP_MARLIN_VERSION, + VP_PrintTime, + #if ENABLED(PRINTCOUNTER) + VP_PrintAccTime, + VP_PrintsTotal, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDTuningWaiting[] PROGMEM = { + VP_WAITING_STATUS, + 0x0000 +}; + +const uint16_t VPList_FLCPreheat[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_FLCPrinting[] PROGMEM = { + #if HOTENDS >= 1 + VP_SD_Print_ProbeOffsetZ, + #endif + 0x0000 +}; + +const struct VPMapping VPMap[] PROGMEM = { + { DGUSLCD_SCREEN_BOOT, VPList_Boot }, + { DGUSLCD_SCREEN_MAIN, VPList_Main }, + { DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp }, + { DGUSLCD_SCREEN_STATUS, VPList_Status }, + { DGUSLCD_SCREEN_STATUS2, VPList_Status2 }, + { DGUSLCD_SCREEN_PREHEAT, VPList_Preheat }, + { DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove }, + { DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude }, + { DGUSLCD_SCREEN_FILAMENT_HEATING, VPList_Filament_heating }, + { DGUSLCD_SCREEN_FILAMENT_LOADING, VPList_Filament_load_unload }, + { DGUSLCD_SCREEN_FILAMENT_UNLOADING, VPList_Filament_load_unload }, + { DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation }, + { DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList }, + { DGUSLCD_SCREEN_SDPRINTTUNE, VPList_SDPrintTune }, + { DGUSLCD_SCREEN_WAITING, VPList_PIDTuningWaiting }, + { DGUSLCD_SCREEN_FLC_PREHEAT, VPList_FLCPreheat }, + { DGUSLCD_SCREEN_FLC_PRINTING, VPList_FLCPrinting }, + { DGUSLCD_SCREEN_STEPPERMM, VPList_StepPerMM }, + { DGUSLCD_SCREEN_PID_E, VPList_PIDE0 }, + { DGUSLCD_SCREEN_PID_BED, VPList_PIDBED }, + { DGUSLCD_SCREEN_INFOS, VPList_Infos }, + { 0 , nullptr } // List is terminated with an nullptr as table entry. +}; + +const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION; + +// Helper to define a DGUS_VP_Variable for common use cases. +#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR } + +// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string) +#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR } + +const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { + // Helper to detect touch events + VPHELPER(VP_SCREENCHANGE, nullptr, DGUSScreenVariableHandler::ScreenChangeHook, nullptr), + VPHELPER(VP_SCREENCHANGE_ASK, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfIdle, nullptr), + VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr), + VPHELPER(VP_CONFIRMED, nullptr, DGUSScreenVariableHandler::ScreenConfirmedOK, nullptr), + + VPHELPER(VP_TEMP_ALL_OFF, nullptr, &DGUSScreenVariableHandler::HandleAllHeatersOff, nullptr), + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_OPTION, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMoveOption, nullptr), + #endif + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_X, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + #else + VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + #endif + VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &DGUSScreenVariableHandler::HandleMotorLockUnlock, nullptr), + #if ENABLED(POWER_LOSS_RECOVERY) + VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &DGUSScreenVariableHandler::HandlePowerLossRecovery, nullptr), + #endif + VPHELPER(VP_SETTINGS, nullptr, &DGUSScreenVariableHandler::HandleSettings, nullptr), + #if ENABLED(SINGLE_Z_CALIBRATION) + VPHELPER(VP_Z_CALIBRATE, nullptr, &DGUSScreenVariableHandler::HandleZCalibration, nullptr), + #endif + + #if ENABLED(FIRST_LAYER_CAL) + VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &DGUSScreenVariableHandler::HandleFirstLayerCal, nullptr), + #endif + + { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr + { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay }, + + // Temperature Data + #if HOTENDS >= 1 + VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_EPos, &destination.e, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_MOVE_E0, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr), + VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(DGUS_PREHEAT_UI) + VPHELPER(VP_E0_BED_PREHEAT, nullptr, &DGUSScreenVariableHandler::HandlePreheat, nullptr), + #endif + #if ENABLED(PIDTEMP) + VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr), + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload), + #endif + #endif + #if HOTENDS >= 2 + VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_MOVE_E1, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr), + VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(PIDTEMP) + VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr), + #endif + VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload), + #endif + #if HAS_HEATED_BED + VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(PIDTEMPBED) + VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr), + #endif + #endif + + // Fan Data + #if FAN_COUNT + #define FAN_VPHELPER(N) \ + VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay), \ + VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &DGUSScreenVariableHandler::HandleFanControl, nullptr), \ + VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendFanStatusToDisplay), + REPEAT(FAN_COUNT, FAN_VPHELPER) + #endif + + // Feedrate + VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, DGUSScreenVariableHandler::DGUSLCD_SetValueDirectly, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ), + + // Position Data + VPHELPER(VP_XPos, ¤t_position.x, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_YPos, ¤t_position.y, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_ZPos, ¤t_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + + // Print Progress + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + #endif + + // Print Time + VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay), + #if ENABLED(PRINTCOUNTER) + VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintAccTimeToDisplay), + VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintsTotalToDisplay), + #endif + + VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #if HOTENDS >= 1 + VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif + #if HOTENDS >= 2 + VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif + + // SDCard File listing. + #if ENABLED(SDSUPPORT) + VPHELPER(VP_SD_ScrollEvent, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ScrollFilelist, nullptr), + VPHELPER(VP_SD_FileSelected, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_FileSelected, nullptr), + VPHELPER(VP_SD_FileSelectConfirm, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_StartPrint, nullptr), + VPHELPER_STR(VP_SD_FileName0, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName1, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName2, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName3, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename), + VPHELPER(VP_SD_ResumePauseAbort, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort, nullptr), + VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort, nullptr), + VPHELPER(VP_SD_Print_Setting, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_PrintTune, nullptr), + #if HAS_BED_PROBE + VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe_offset.z, DGUSScreenVariableHandler::HandleProbeOffsetZChanged, &DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<2>), + #if ENABLED(BABYSTEPPING) + VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, DGUSScreenVariableHandler::HandleLiveAdjustZ, nullptr), + #endif + #endif + #endif + + #if ENABLED(DGUS_UI_WAITING) + VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWaitingStatusToDisplay), + #endif + + // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content. + { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + + VPHELPER(0, 0, 0, 0) // must be last entry. +}; + +#endif // DGUS_LCD_UI_FYSETC diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.h new file mode 100644 index 0000000000..ca465697f3 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.h @@ -0,0 +1,290 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +enum DGUSLCD_Screens : uint8_t { + DGUSLCD_SCREEN_BOOT = 0, + DGUSLCD_SCREEN_MAIN = 1, + DGUSLCD_SCREEN_STATUS = 1, + DGUSLCD_SCREEN_STATUS2 = 1, + DGUSLCD_SCREEN_TEMPERATURE = 10, + DGUSLCD_SCREEN_PREHEAT = 18, + DGUSLCD_SCREEN_POWER_LOSS = 100, + DGUSLCD_SCREEN_MANUALMOVE = 192, + DGUSLCD_SCREEN_UTILITY = 120, + DGUSLCD_SCREEN_FILAMENT_HEATING = 146, + DGUSLCD_SCREEN_FILAMENT_LOADING = 148, + DGUSLCD_SCREEN_FILAMENT_UNLOADING = 158, + DGUSLCD_SCREEN_MANUALEXTRUDE = 160, + DGUSLCD_SCREEN_SDFILELIST = 71, + DGUSLCD_SCREEN_SDPRINTMANIPULATION = 73, + DGUSLCD_SCREEN_SDPRINTTUNE = 75, + DGUSLCD_SCREEN_FLC_PREHEAT = 94, + DGUSLCD_SCREEN_FLC_PRINTING = 96, + DGUSLCD_SCREEN_STEPPERMM = 212, + DGUSLCD_SCREEN_PID_E = 214, + DGUSLCD_SCREEN_PID_BED = 218, + DGUSLCD_SCREEN_INFOS = 30, + DGUSLCD_SCREEN_CONFIRM = 240, + DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version") + DGUSLCD_SCREEN_WAITING = 251, + DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen" + DGUSLDC_SCREEN_UNUSED = 255 +}; + +// Display Memory layout used (T5UID) +// Except system variables this is arbitrary, just to organize stuff.... + +// 0x0000 .. 0x0FFF -- System variables and reserved by the display +// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version +// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action) +// 0x3000 .. 0x4FFF -- Marlin Data to be displayed +// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused + +// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight, +// so that we can keep variables nicely together in the address space. + +// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out. +constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible +constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible +constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality. +constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd. + +// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup. +constexpr uint16_t VP_MSGSTR1 = 0x1100; +constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... +constexpr uint16_t VP_MSGSTR2 = 0x1140; +constexpr uint8_t VP_MSGSTR2_LEN = 0x20; +constexpr uint16_t VP_MSGSTR3 = 0x1180; +constexpr uint8_t VP_MSGSTR3_LEN = 0x20; +constexpr uint16_t VP_MSGSTR4 = 0x11C0; +constexpr uint8_t VP_MSGSTR4_LEN = 0x20; + +// Screenchange request for screens that only make sense when printer is idle. +// e.g movement is only allowed if printer is not printing. +// Marlin must confirm by setting the screen manually. +constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000; +constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. +constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)= +constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card. + +constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen. + +// Buttons on the SD-Card File listing. +constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down +constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected. +constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) + +constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints +constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog) +constexpr uint16_t VP_SD_Print_Setting = 0x2040; +constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up + +// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values +// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support) +// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us +// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm. +constexpr uint16_t VP_MOVE_X = 0x2100; +constexpr uint16_t VP_MOVE_Y = 0x2102; +constexpr uint16_t VP_MOVE_Z = 0x2104; +constexpr uint16_t VP_MOVE_E0 = 0x2110; +constexpr uint16_t VP_MOVE_E1 = 0x2112; +//constexpr uint16_t VP_MOVE_E2 = 0x2114; +//constexpr uint16_t VP_MOVE_E3 = 0x2116; +//constexpr uint16_t VP_MOVE_E4 = 0x2118; +//constexpr uint16_t VP_MOVE_E5 = 0x211A; +constexpr uint16_t VP_HOME_ALL = 0x2120; +constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130; + +// Power loss recovery +constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180; + +// Fan Control Buttons , switch between "off" and "on" +constexpr uint16_t VP_FAN0_CONTROL = 0x2200; +constexpr uint16_t VP_FAN1_CONTROL = 0x2202; +//constexpr uint16_t VP_FAN2_CONTROL = 0x2204; +//constexpr uint16_t VP_FAN3_CONTROL = 0x2206; + +// Heater Control Buttons , triged between "cool down" and "heat PLA" state +constexpr uint16_t VP_E0_CONTROL = 0x2210; +constexpr uint16_t VP_E1_CONTROL = 0x2212; +//constexpr uint16_t VP_E2_CONTROL = 0x2214; +//constexpr uint16_t VP_E3_CONTROL = 0x2216; +//constexpr uint16_t VP_E4_CONTROL = 0x2218; +//constexpr uint16_t VP_E5_CONTROL = 0x221A; +constexpr uint16_t VP_BED_CONTROL = 0x221C; + +// Preheat +constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220; +constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222; +//constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224; +//constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226; +//constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228; +//constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A; + +// Filament load and unload +constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300; +constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2302; + +// Settings store , reset +constexpr uint16_t VP_SETTINGS = 0x2400; + +// PID autotune +constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410; +//constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412; +//constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414; +//constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416; +//constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418; +//constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A; +constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420; + +// Calibrate Z +constexpr uint16_t VP_Z_CALIBRATE = 0x2430; + +// First layer cal +constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded + +// Firmware version on the boot screen. +constexpr uint16_t VP_MARLIN_VERSION = 0x3000; +constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. + +// Place for status messages. +constexpr uint16_t VP_M117 = 0x3020; +constexpr uint8_t VP_M117_LEN = 0x20; + +// Temperatures. +constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer +constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer +constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer + +// reserved to support up to 6 Extruders: +constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer +//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer +//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer +//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer +//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer +//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer +//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer + +constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer +constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer + +constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer +constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer + +// reserved for up to 6 Extruders: +//constexpr uint16_t VP_Flowrate_E2 = 0x3094; +//constexpr uint16_t VP_Flowrate_E3 = 0x3096; +//constexpr uint16_t VP_Flowrate_E4 = 0x3098; +//constexpr uint16_t VP_Flowrate_E5 = 0x309A; + +constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100) + +// Actual Position +constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy + +constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy + +constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100) + +constexpr uint16_t VP_PrintTime = 0x3140; +constexpr uint16_t VP_PrintTime_LEN = 32; + +constexpr uint16_t VP_PrintAccTime = 0x3160; +constexpr uint16_t VP_PrintAccTime_LEN = 32; + +constexpr uint16_t VP_PrintsTotal = 0x3180; +constexpr uint16_t VP_PrintsTotal_LEN = 16; + +// SDCard File Listing +constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. +constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there. +constexpr uint16_t VP_SD_FileName0 = 0x3200; +constexpr uint16_t VP_SD_FileName1 = 0x3220; +constexpr uint16_t VP_SD_FileName2 = 0x3240; +constexpr uint16_t VP_SD_FileName3 = 0x3260; +constexpr uint16_t VP_SD_FileName4 = 0x3280; + +constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; // +constexpr uint16_t VP_SD_Print_Filename = 0x32C0; + +// Fan status +constexpr uint16_t VP_FAN0_STATUS = 0x3300; +constexpr uint16_t VP_FAN1_STATUS = 0x3302; +//constexpr uint16_t VP_FAN2_STATUS = 0x3304; +//constexpr uint16_t VP_FAN3_STATUS = 0x3306; + +// Heater status +constexpr uint16_t VP_E0_STATUS = 0x3310; +//constexpr uint16_t VP_E1_STATUS = 0x3312; +//constexpr uint16_t VP_E2_STATUS = 0x3314; +//constexpr uint16_t VP_E3_STATUS = 0x3316; +//constexpr uint16_t VP_E4_STATUS = 0x3318; +//constexpr uint16_t VP_E5_STATUS = 0x331A; +constexpr uint16_t VP_BED_STATUS = 0x331C; + +constexpr uint16_t VP_MOVE_OPTION = 0x3400; + +// Step per mm +constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4 +//constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602; +constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604; +//constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606; +constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608; +//constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A; +constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610; +constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612; +//constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614; +//constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616; +//constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618; +//constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A; + +// PIDs +constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4 +constexpr uint16_t VP_E0_PID_I = 0x3702; +constexpr uint16_t VP_E0_PID_D = 0x3704; +constexpr uint16_t VP_BED_PID_P = 0x3710; +constexpr uint16_t VP_BED_PID_I = 0x3712; +constexpr uint16_t VP_BED_PID_D = 0x3714; + +// Wating screen status +constexpr uint16_t VP_WAITING_STATUS = 0x3800; + +// SPs for certain variables... +// located at 0x5000 and up +// Not used yet! +// This can be used e.g to make controls / data display invisible +constexpr uint16_t SP_T_E0_Is = 0x5000; +constexpr uint16_t SP_T_E0_Set = 0x5010; +constexpr uint16_t SP_T_E1_Is = 0x5020; +constexpr uint16_t SP_T_Bed_Is = 0x5030; +constexpr uint16_t SP_T_Bed_Set = 0x5040; diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.cpp b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.cpp new file mode 100644 index 0000000000..0c25f64b6a --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.cpp @@ -0,0 +1,476 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* DGUS VPs changed by George Fu in 2019 for Marlin */ + +#include "../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_HIPRECY) + +#include "DGUSDisplayDefinition.h" +#include "DGUSDisplay.h" + +#include "../../../../module/temperature.h" +#include "../../../../module/motion.h" +#include "../../../../module/planner.h" + +#include "../../ui_api.h" +#include "../../../ultralcd.h" + +#if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + uint16_t distanceToMove = 0.1; +#endif + +const uint16_t VPList_Boot[] PROGMEM = { + VP_MARLIN_VERSION, + 0x0000 +}; + +const uint16_t VPList_Main[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded. */ + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS, + #endif + #if FAN_COUNT > 0 + VP_Fan0_Percentage, VP_FAN0_STATUS, + #endif + VP_XPos, VP_YPos, VP_ZPos, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + VP_PrintProgress_Percentage, + #endif + 0x0000 +}; + +const uint16_t VPList_Temp[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_Status[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded */ + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + #if FAN_COUNT > 0 + VP_Fan0_Percentage, + #endif + VP_XPos, VP_YPos, VP_ZPos, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + VP_PrintProgress_Percentage, + 0x0000 +}; + +const uint16_t VPList_Status2[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded */ + #if HOTENDS >= 1 + VP_Flowrate_E0, + #endif + #if HOTENDS >= 2 + VP_Flowrate_E1, + #endif + VP_PrintProgress_Percentage, + VP_PrintTime, + 0x0000 +}; + +const uint16_t VPList_Preheat[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_ManualMove[] PROGMEM = { + VP_XPos, VP_YPos, VP_ZPos, + 0x0000 +}; + +const uint16_t VPList_ManualExtrude[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + VP_EPos, + 0x0000 +}; + +const uint16_t VPList_FanAndFeedrate[] PROGMEM = { + VP_Feedrate_Percentage, VP_Fan0_Percentage, + 0x0000 +}; + +const uint16_t VPList_SD_FlowRates[] PROGMEM = { + VP_Flowrate_E0, VP_Flowrate_E1, + 0x0000 +}; + +const uint16_t VPList_Filament_heating[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + VP_E0_FILAMENT_LOAD_UNLOAD, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_Filament_load_unload[] PROGMEM = { + #if HOTENDS >= 1 + VP_E0_FILAMENT_LOAD_UNLOAD, + #endif + #if HOTENDS >= 2 + VP_E1_FILAMENT_LOAD_UNLOAD, + #endif + 0x0000 +}; + +const uint16_t VPList_SDFileList[] PROGMEM = { + VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4, + 0x0000 +}; + +const uint16_t VPList_SD_PrintManipulation[] PROGMEM = { + VP_PrintProgress_Percentage, VP_PrintTime, + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + #if FAN_COUNT > 0 + VP_Fan0_Percentage, + #if FAN_COUNT > 1 + VP_Fan1_Percentage, + #endif + #endif + VP_Flowrate_E0, + 0x0000 +}; + +const uint16_t VPList_SDPrintTune[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + VP_Feedrate_Percentage, + #if FAN_COUNT > 0 + VP_Fan0_Percentage, + #endif + VP_Flowrate_E0, + VP_SD_Print_ProbeOffsetZ, + 0x0000 +}; + +const uint16_t VPList_StepPerMM[] PROGMEM = { + VP_X_STEP_PER_MM, + VP_Y_STEP_PER_MM, + VP_Z_STEP_PER_MM, + #if HOTENDS >= 1 + VP_E0_STEP_PER_MM, + #endif + #if HOTENDS >= 2 + VP_E1_STEP_PER_MM, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDE0[] PROGMEM = { + #if ENABLED(PIDTEMP) + VP_E0_PID_P, + VP_E0_PID_I, + VP_E0_PID_D, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDBED[] PROGMEM = { + #if ENABLED(PIDTEMP) + VP_BED_PID_P, + VP_BED_PID_I, + VP_BED_PID_D, + #endif + 0x0000 +}; + +const uint16_t VPList_Infos[] PROGMEM = { + VP_MARLIN_VERSION, + VP_PrintTime, + #if ENABLED(PRINTCOUNTER) + VP_PrintAccTime, + VP_PrintsTotal, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDTuningWaiting[] PROGMEM = { + VP_WAITING_STATUS, + 0x0000 +}; + +const uint16_t VPList_FLCPreheat[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_FLCPrinting[] PROGMEM = { + #if HOTENDS >= 1 + VP_SD_Print_ProbeOffsetZ, + #endif + 0x0000 +}; + +const struct VPMapping VPMap[] PROGMEM = { + { DGUSLCD_SCREEN_BOOT, VPList_Boot }, + { DGUSLCD_SCREEN_MAIN, VPList_Main }, + { DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp }, + { DGUSLCD_SCREEN_STATUS, VPList_Status }, + { DGUSLCD_SCREEN_STATUS2, VPList_Status2 }, + { DGUSLCD_SCREEN_PREHEAT, VPList_Preheat }, + { DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove }, + { DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude }, + { DGUSLCD_SCREEN_FILAMENT_HEATING, VPList_Filament_heating }, + { DGUSLCD_SCREEN_FILAMENT_LOADING, VPList_Filament_load_unload }, + { DGUSLCD_SCREEN_FILAMENT_UNLOADING, VPList_Filament_load_unload }, + { DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation }, + { DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList }, + { DGUSLCD_SCREEN_SDPRINTTUNE, VPList_SDPrintTune }, + { DGUSLCD_SCREEN_WAITING, VPList_PIDTuningWaiting }, + { DGUSLCD_SCREEN_FLC_PREHEAT, VPList_FLCPreheat }, + { DGUSLCD_SCREEN_FLC_PRINTING, VPList_FLCPrinting }, + { DGUSLCD_SCREEN_STEPPERMM, VPList_StepPerMM }, + { DGUSLCD_SCREEN_PID_E, VPList_PIDE0 }, + { DGUSLCD_SCREEN_PID_BED, VPList_PIDBED }, + { DGUSLCD_SCREEN_INFOS, VPList_Infos }, + { 0 , nullptr } // List is terminated with an nullptr as table entry. +}; + +const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION; + +// Helper to define a DGUS_VP_Variable for common use cases. +#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR } + +// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string) +#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR } + +const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { + // Helper to detect touch events + VPHELPER(VP_SCREENCHANGE, nullptr, DGUSScreenVariableHandler::ScreenChangeHook, nullptr), + VPHELPER(VP_SCREENCHANGE_ASK, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfIdle, nullptr), + VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr), + VPHELPER(VP_CONFIRMED, nullptr, DGUSScreenVariableHandler::ScreenConfirmedOK, nullptr), + + VPHELPER(VP_TEMP_ALL_OFF, nullptr, &DGUSScreenVariableHandler::HandleAllHeatersOff, nullptr), + + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_OPTION, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMoveOption, nullptr), + #endif + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_X, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + #else + VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + #endif + VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &DGUSScreenVariableHandler::HandleMotorLockUnlock, nullptr), + #if ENABLED(POWER_LOSS_RECOVERY) + VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &DGUSScreenVariableHandler::HandlePowerLossRecovery, nullptr), + #endif + VPHELPER(VP_SETTINGS, nullptr, &DGUSScreenVariableHandler::HandleSettings, nullptr), + #if ENABLED(SINGLE_Z_CALIBRATION) + VPHELPER(VP_Z_CALIBRATE, nullptr, &DGUSScreenVariableHandler::HandleZCalibration, nullptr), + #endif + #if ENABLED(FIRST_LAYER_CAL) + VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &DGUSScreenVariableHandler::HandleFirstLayerCal, nullptr), + #endif + + { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr + { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay }, + + // Temperature Data + #if HOTENDS >= 1 + VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E0, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_EPos, &destination.e, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_MOVE_E0, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr), + VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(DGUS_PREHEAT_UI) + VPHELPER(VP_E0_BED_PREHEAT, nullptr, &DGUSScreenVariableHandler::HandlePreheat, nullptr), + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload), + #endif + #if ENABLED(PIDTEMP) + VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr), + #endif + #endif + #if HOTENDS >= 2 + VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E1, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_MOVE_E1, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr), + VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #endif + #if HAS_HEATED_BED + VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(PIDTEMP) + VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr), + #endif + #endif + + // Fan Data + #if FAN_COUNT + #define FAN_VPHELPER(N) \ + VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay), \ + VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &DGUSScreenVariableHandler::HandleFanControl, nullptr), \ + VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendFanStatusToDisplay), + REPEAT(FAN_COUNT, FAN_VPHELPER) + #endif + + // Feedrate + VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, DGUSScreenVariableHandler::DGUSLCD_SetValueDirectly, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ), + + // Position Data + VPHELPER(VP_XPos, ¤t_position.x, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_YPos, ¤t_position.y, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_ZPos, ¤t_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), + + // Print Progress + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ), + #endif + + // Print Time + VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay ), + #if ENABLED(PRINTCOUNTER) + VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintAccTimeToDisplay ), + VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintsTotalToDisplay ), + #endif + + VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #if HOTENDS >= 1 + VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif + #if HOTENDS >= 2 + VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif + + // SDCard File listing. + #if ENABLED(SDSUPPORT) + VPHELPER(VP_SD_ScrollEvent, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ScrollFilelist, nullptr), + VPHELPER(VP_SD_FileSelected, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_FileSelected, nullptr), + VPHELPER(VP_SD_FileSelectConfirm, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_StartPrint, nullptr), + VPHELPER_STR(VP_SD_FileName0, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName1, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName2, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName3, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ), + VPHELPER(VP_SD_ResumePauseAbort, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort, nullptr), + VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort, nullptr), + VPHELPER(VP_SD_Print_Setting, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_PrintTune, nullptr), + #if HAS_BED_PROBE + VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe_offset.z, DGUSScreenVariableHandler::HandleProbeOffsetZChanged, &DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<2>), + #if ENABLED(BABYSTEPPING) + VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, DGUSScreenVariableHandler::HandleLiveAdjustZ, nullptr), + #endif + #endif + #endif + + #if ENABLED(DGUS_UI_WAITING) + VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWaitingStatusToDisplay), + #endif + + // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content. + { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, + + VPHELPER(0, 0, 0, 0) // must be last entry. +}; + +#endif // DGUS_LCD_UI_HIPRECY diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.h new file mode 100644 index 0000000000..776b78f11a --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.h @@ -0,0 +1,289 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +enum DGUSLCD_Screens : uint8_t { + DGUSLCD_SCREEN_BOOT = 160, + DGUSLCD_SCREEN_MAIN = 1, + DGUSLCD_SCREEN_STATUS = 1, + DGUSLCD_SCREEN_STATUS2 = 1, + DGUSLCD_SCREEN_POWER_LOSS = 17, + DGUSLCD_SCREEN_TEMPERATURE = 40, + DGUSLCD_SCREEN_MANUALMOVE = 86, + DGUSLCD_SCREEN_PREHEAT = 48, + DGUSLCD_SCREEN_UTILITY = 70, + DGUSLCD_SCREEN_FILAMENT_HEATING = 80, + DGUSLCD_SCREEN_FILAMENT_LOADING = 76, + DGUSLCD_SCREEN_FILAMENT_UNLOADING = 82, + DGUSLCD_SCREEN_MANUALEXTRUDE = 84, + DGUSLCD_SCREEN_SDFILELIST = 3, + DGUSLCD_SCREEN_SDPRINTMANIPULATION = 7, + DGUSLCD_SCREEN_SDPRINTTUNE = 9, + DGUSLCD_SCREEN_FLC_PREHEAT = 94, + DGUSLCD_SCREEN_FLC_PRINTING = 96, + DGUSLCD_SCREEN_STEPPERMM = 122, + DGUSLCD_SCREEN_PID_E = 126, + DGUSLCD_SCREEN_PID_BED = 128, + DGUSLCD_SCREEN_INFOS = 131, + DGUSLCD_SCREEN_CONFIRM = 240, + DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version") + DGUSLCD_SCREEN_WAITING = 251, + DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen" + DGUSLDC_SCREEN_UNUSED = 255 +}; + +// Display Memory layout used (T5UID) +// Except system variables this is arbitrary, just to organize stuff.... + +// 0x0000 .. 0x0FFF -- System variables and reserved by the display +// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version +// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action) +// 0x3000 .. 0x4FFF -- Marlin Data to be displayed +// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused + +// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight, +// so that we can keep variables nicely together in the address space. + +// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out. +constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible +constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible +constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality. +constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd. + +// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup. +constexpr uint16_t VP_MSGSTR1 = 0x1100; +constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... +constexpr uint16_t VP_MSGSTR2 = 0x1140; +constexpr uint8_t VP_MSGSTR2_LEN = 0x20; +constexpr uint16_t VP_MSGSTR3 = 0x1180; +constexpr uint8_t VP_MSGSTR3_LEN = 0x20; +constexpr uint16_t VP_MSGSTR4 = 0x11C0; +constexpr uint8_t VP_MSGSTR4_LEN = 0x20; + +// Screenchange request for screens that only make sense when printer is idle. +// e.g movement is only allowed if printer is not printing. +// Marlin must confirm by setting the screen manually. +constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000; +constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. +constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)= +constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card. + +constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen. + +// Buttons on the SD-Card File listing. +constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down +constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected. +constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) + +constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints +constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog) +constexpr uint16_t VP_SD_Print_Setting = 0x2040; +constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up + +// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values +// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support) +// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us +// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm. +constexpr uint16_t VP_MOVE_X = 0x2100; +constexpr uint16_t VP_MOVE_Y = 0x2102; +constexpr uint16_t VP_MOVE_Z = 0x2104; +constexpr uint16_t VP_MOVE_E0 = 0x2110; +constexpr uint16_t VP_MOVE_E1 = 0x2112; +//constexpr uint16_t VP_MOVE_E2 = 0x2114; +//constexpr uint16_t VP_MOVE_E3 = 0x2116; +//constexpr uint16_t VP_MOVE_E4 = 0x2118; +//constexpr uint16_t VP_MOVE_E5 = 0x211A; +constexpr uint16_t VP_HOME_ALL = 0x2120; +constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130; + +// Power loss recovery +constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180; + +// Fan Control Buttons , switch between "off" and "on" +constexpr uint16_t VP_FAN0_CONTROL = 0x2200; +constexpr uint16_t VP_FAN1_CONTROL = 0x2202; +//constexpr uint16_t VP_FAN2_CONTROL = 0x2204; +//constexpr uint16_t VP_FAN3_CONTROL = 0x2206; + +// Heater Control Buttons , triged between "cool down" and "heat PLA" state +constexpr uint16_t VP_E0_CONTROL = 0x2210; +constexpr uint16_t VP_E1_CONTROL = 0x2212; +//constexpr uint16_t VP_E2_CONTROL = 0x2214; +//constexpr uint16_t VP_E3_CONTROL = 0x2216; +//constexpr uint16_t VP_E4_CONTROL = 0x2218; +//constexpr uint16_t VP_E5_CONTROL = 0x221A; +constexpr uint16_t VP_BED_CONTROL = 0x221C; + +// Preheat +constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220; +//constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222; +//constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224; +//constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226; +//constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228; +//constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A; + +// Filament load and unload +constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300; + +// Settings store , reset +constexpr uint16_t VP_SETTINGS = 0x2400; + +// PID autotune +constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410; +//constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412; +//constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414; +//constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416; +//constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418; +//constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A; +constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420; + +// Calibrate Z +constexpr uint16_t VP_Z_CALIBRATE = 0x2430; + +// First layer cal +constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded + +// Firmware version on the boot screen. +constexpr uint16_t VP_MARLIN_VERSION = 0x3000; +constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. + +// Place for status messages. +constexpr uint16_t VP_M117 = 0x3020; +constexpr uint8_t VP_M117_LEN = 0x20; + +// Temperatures. +constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer +constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer +constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer + +// reserved to support up to 6 Extruders: +//constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer +//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer +//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer +//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer +//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer +//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer +//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer + +constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer +constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer + +constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer +constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer + +// reserved for up to 6 Extruders: +//constexpr uint16_t VP_Flowrate_E2 = 0x3094; +//constexpr uint16_t VP_Flowrate_E3 = 0x3096; +//constexpr uint16_t VP_Flowrate_E4 = 0x3098; +//constexpr uint16_t VP_Flowrate_E5 = 0x309A; + +constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100) + +// Actual Position +constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy + +constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy + +constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100) + +constexpr uint16_t VP_PrintTime = 0x3140; +constexpr uint16_t VP_PrintTime_LEN = 32; + +constexpr uint16_t VP_PrintAccTime = 0x3160; +constexpr uint16_t VP_PrintAccTime_LEN = 32; + +constexpr uint16_t VP_PrintsTotal = 0x3180; +constexpr uint16_t VP_PrintsTotal_LEN = 16; + +// SDCard File Listing +constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. +constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there. +constexpr uint16_t VP_SD_FileName0 = 0x3200; +constexpr uint16_t VP_SD_FileName1 = 0x3220; +constexpr uint16_t VP_SD_FileName2 = 0x3240; +constexpr uint16_t VP_SD_FileName3 = 0x3260; +constexpr uint16_t VP_SD_FileName4 = 0x3280; + +constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; // + +constexpr uint16_t VP_SD_Print_Filename = 0x32C0; // +// Fan status +constexpr uint16_t VP_FAN0_STATUS = 0x3300; +constexpr uint16_t VP_FAN1_STATUS = 0x3302; +//constexpr uint16_t VP_FAN2_STATUS = 0x3304; +//constexpr uint16_t VP_FAN3_STATUS = 0x3306; + +// Heater status +constexpr uint16_t VP_E0_STATUS = 0x3310; +//constexpr uint16_t VP_E1_STATUS = 0x3312; +//constexpr uint16_t VP_E2_STATUS = 0x3314; +//constexpr uint16_t VP_E3_STATUS = 0x3316; +//constexpr uint16_t VP_E4_STATUS = 0x3318; +//constexpr uint16_t VP_E5_STATUS = 0x331A; +constexpr uint16_t VP_BED_STATUS = 0x331C; + +constexpr uint16_t VP_MOVE_OPTION = 0x3400; + +// Step per mm +constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4 +//constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602; +constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604; +//constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606; +constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608; +//constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A; +constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610; +//constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612; +//constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614; +//constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616; +//constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618; +//constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A; + +// PIDs +constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4 +constexpr uint16_t VP_E0_PID_I = 0x3702; +constexpr uint16_t VP_E0_PID_D = 0x3704; +constexpr uint16_t VP_BED_PID_P = 0x3710; +constexpr uint16_t VP_BED_PID_I = 0x3712; +constexpr uint16_t VP_BED_PID_D = 0x3714; + +// Wating screen status +constexpr uint16_t VP_WAITING_STATUS = 0x3800; + +// SPs for certain variables... +// located at 0x5000 and up +// Not used yet! +// This can be used e.g to make controls / data display invisible +constexpr uint16_t SP_T_E0_Is = 0x5000; +constexpr uint16_t SP_T_E0_Set = 0x5010; +constexpr uint16_t SP_T_E1_Is = 0x5020; +constexpr uint16_t SP_T_Bed_Is = 0x5030; +constexpr uint16_t SP_T_Bed_Set = 0x5040; diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.cpp b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.cpp similarity index 55% rename from Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.cpp rename to Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.cpp index de15d54597..ca56052829 100644 --- a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.cpp +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.cpp @@ -24,16 +24,21 @@ #include "../../../../inc/MarlinConfigPre.h" -#if ENABLED(DGUS_LCD) +#if ENABLED(DGUS_LCD_UI_ORIGIN) #include "DGUSDisplayDefinition.h" #include "DGUSDisplay.h" #include "../../../../module/temperature.h" #include "../../../../module/motion.h" +#include "../../../../module/planner.h" #include "../../../ultralcd.h" +#if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + uint16_t distanceToMove = 0.1; +#endif + const uint16_t VPList_Boot[] PROGMEM = { VP_MARLIN_VERSION, 0x0000 @@ -49,7 +54,7 @@ const uint16_t VPList_Temp[] PROGMEM = { VP_T_E0_Is, VP_T_E0_Set, #endif #if HOTENDS >= 2 - VP_T_E1_I, VP_T_E1_S, + VP_T_E1_Is, VP_T_E1_Set, #endif #if HAS_HEATED_BED VP_T_Bed_Is, VP_T_Bed_Set, @@ -63,16 +68,16 @@ const uint16_t VPList_Status[] PROGMEM = { VP_T_E0_Is, VP_T_E0_Set, #endif #if HOTENDS >= 2 - VP_T_E1_I, VP_T_E1_S, + VP_T_E1_Is, VP_T_E1_Set, #endif #if HAS_HEATED_BED VP_T_Bed_Is, VP_T_Bed_Set, #endif #if FAN_COUNT > 0 - VP_Fan_Percentage, + VP_Fan0_Percentage, #endif VP_XPos, VP_YPos, VP_ZPos, - VP_Fan_Percentage, + VP_Fan0_Percentage, VP_Feedrate_Percentage, VP_PrintProgress_Percentage, 0x0000 @@ -102,7 +107,7 @@ const uint16_t VPList_ManualExtrude[] PROGMEM = { }; const uint16_t VPList_FanAndFeedrate[] PROGMEM = { - VP_Feedrate_Percentage, VP_Fan_Percentage, + VP_Feedrate_Percentage, VP_Fan0_Percentage, 0x0000 }; @@ -150,15 +155,33 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { // Helper to detect touch events VPHELPER(VP_SCREENCHANGE, nullptr, DGUSScreenVariableHandler::ScreenChangeHook, nullptr), VPHELPER(VP_SCREENCHANGE_ASK, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfIdle, nullptr), - VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr), + #if ENABLED(SDSUPPORT) + VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr), + #endif VPHELPER(VP_CONFIRMED, nullptr, DGUSScreenVariableHandler::ScreenConfirmedOK, nullptr), VPHELPER(VP_TEMP_ALL_OFF, nullptr, &DGUSScreenVariableHandler::HandleAllHeatersOff, nullptr), - VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), - VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), - VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), - VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_OPTION, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMoveOption, nullptr), + #endif + #if ENABLED(DUGS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_X, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + #else + VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr), + #endif + + VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &DGUSScreenVariableHandler::HandleMotorLockUnlock, nullptr), + #if ENABLED(POWER_LOSS_RECOVERY) + VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &DGUSScreenVariableHandler::HandlePowerLossRecovery, nullptr), + #endif + VPHELPER(VP_SETTINGS, nullptr, &DGUSScreenVariableHandler::HandleSettings, nullptr), { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM }, // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr @@ -171,39 +194,82 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { VPHELPER(VP_Flowrate_E0, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), VPHELPER(VP_EPos, &destination.e, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), VPHELPER(VP_MOVE_E0, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr), + VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(DGUS_PREHEAT_UI) + VPHELPER(VP_E0_BED_PREHEAT, nullptr, &DGUSScreenVariableHandler::HandlePreheat, nullptr), + #endif + #if ENABLED(PIDTEMP) + VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr), + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload), + #endif #endif #if HOTENDS >= 2 - VPHELPER(VP_T_E1_I, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>), - VPHELPER(VP_T_E1_S, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), VPHELPER(VP_Flowrate_E1, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), VPHELPER(VP_MOVE_E1, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr), - #endif - #if HOTENDS >= 3 - #error More than 2 Hotends currently not implemented on the Display UI design. + VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(PIDTEMP) + VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr), + #endif #endif #if HAS_HEATED_BED VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>), VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr), + VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(PIDTEMPBED) + VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID), + #endif #endif - // Fan Data. - #if FAN_COUNT > 0 - VPHELPER(VP_Fan_Percentage, &thermalManager.fan_speed[0], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay), + // Fan Data + #if FAN_COUNT + #define FAN_VPHELPER(N) \ + VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay), \ + VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &DGUSScreenVariableHandler::HandleFanControl, nullptr), \ + VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendFanStatusToDisplay), + REPEAT(FAN_COUNT, FAN_VPHELPER) #endif - // Feedrate. + // Feedrate VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, DGUSScreenVariableHandler::DGUSLCD_SetValueDirectly, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ), - // Position Data. + // Position Data VPHELPER(VP_XPos, ¤t_position.x, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), VPHELPER(VP_YPos, ¤t_position.y, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), VPHELPER(VP_ZPos, ¤t_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>), - // Print Progress. - VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ), + // Print Progress + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ), + #endif // Print Time VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay ), + #if ENABLED(PRINTCOUNTER) + VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintAccTimeToDisplay ), + VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintsTotalToDisplay ), + #endif + + VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #if HOTENDS >= 1 + VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif + #if HOTENDS >= 2 + VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif // SDCard File listing. #if ENABLED(SDSUPPORT) @@ -217,6 +283,17 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ), VPHELPER(VP_SD_ResumePauseAbort, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort, nullptr), VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort, nullptr), + VPHELPER(VP_SD_Print_Setting, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_PrintTune, nullptr), + #if HAS_BED_PROBE + VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe_offset.z, DGUSScreenVariableHandler::HandleProbeOffsetZChanged, &DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<2>), + #if ENABLED(BABYSTEPPING) + VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, DGUSScreenVariableHandler::HandleLiveAdjustZ, nullptr), + #endif + #endif + #endif + + #if ENABLED(DGUS_UI_WAITING) + VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWaitingStatusToDisplay), #endif // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content. @@ -228,4 +305,4 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { VPHELPER(0, 0, 0, 0) // must be last entry. }; -#endif // DGUS_LCD +#endif // DGUS_LCD_UI_ORIGIN diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.h b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.h new file mode 100644 index 0000000000..7c76363094 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.h @@ -0,0 +1,280 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +enum DGUSLCD_Screens : uint8_t { + DGUSLCD_SCREEN_BOOT = 0, + DGUSLCD_SCREEN_MAIN = 10, + DGUSLCD_SCREEN_TEMPERATURE = 20, + DGUSLCD_SCREEN_STATUS = 30, + DGUSLCD_SCREEN_STATUS2 = 32, + DGUSLCD_SCREEN_MANUALMOVE = 40, + DGUSLCD_SCREEN_MANUALEXTRUDE=42, + DGUSLCD_SCREEN_FANANDFEEDRATE = 44, + DGUSLCD_SCREEN_FLOWRATES = 46, + DGUSLCD_SCREEN_SDFILELIST = 50, + DGUSLCD_SCREEN_SDPRINTMANIPULATION = 52, + DGUSLCD_SCREEN_POWER_LOSS = 100, + DGUSLCD_SCREEN_PREHEAT=120, + DGUSLCD_SCREEN_UTILITY=110, + DGUSLCD_SCREEN_FILAMENT_HEATING=146, + DGUSLCD_SCREEN_FILAMENT_LOADING=148, + DGUSLCD_SCREEN_FILAMENT_UNLOADING=158, + DGUSLCD_SCREEN_SDPRINTTUNE = 170, + DGUSLCD_SCREEN_CONFIRM = 240, + DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version") + DGUSLCD_SCREEN_WAITING = 251, + DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen" + DGUSLDC_SCREEN_UNUSED = 255 +}; + +// Display Memory layout used (T5UID) +// Except system variables this is arbitrary, just to organize stuff.... + +// 0x0000 .. 0x0FFF -- System variables and reserved by the display +// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version +// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action) +// 0x3000 .. 0x4FFF -- Marlin Data to be displayed +// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused + +// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight, +// so that we can keep variables nicely together in the address space. + +// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out. +constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible +constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible +constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality. +constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd. + +// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup. +constexpr uint16_t VP_MSGSTR1 = 0x1100; +constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... +constexpr uint16_t VP_MSGSTR2 = 0x1140; +constexpr uint8_t VP_MSGSTR2_LEN = 0x20; +constexpr uint16_t VP_MSGSTR3 = 0x1180; +constexpr uint8_t VP_MSGSTR3_LEN = 0x20; +constexpr uint16_t VP_MSGSTR4 = 0x11C0; +constexpr uint8_t VP_MSGSTR4_LEN = 0x20; + +// Screenchange request for screens that only make sense when printer is idle. +// e.g movement is only allowed if printer is not printing. +// Marlin must confirm by setting the screen manually. +constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000; +constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. +constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)= +constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card. + +constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen. + +// Buttons on the SD-Card File listing. +constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down +constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected. +constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) + +constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints +constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog) +constexpr uint16_t VP_SD_Print_Setting = 0x2040; +constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up + +// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values +// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support) +// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us +// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm. +constexpr uint16_t VP_MOVE_X = 0x2100; +constexpr uint16_t VP_MOVE_Y = 0x2102; +constexpr uint16_t VP_MOVE_Z = 0x2104; +constexpr uint16_t VP_MOVE_E0 = 0x2110; +constexpr uint16_t VP_MOVE_E1 = 0x2112; +//constexpr uint16_t VP_MOVE_E2 = 0x2114; +//constexpr uint16_t VP_MOVE_E3 = 0x2116; +//constexpr uint16_t VP_MOVE_E4 = 0x2118; +//constexpr uint16_t VP_MOVE_E5 = 0x211A; +constexpr uint16_t VP_HOME_ALL = 0x2120; +constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130; + +// Power loss recovery +constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180; + +// Fan Control Buttons , switch between "off" and "on" +constexpr uint16_t VP_FAN0_CONTROL = 0x2200; +constexpr uint16_t VP_FAN1_CONTROL = 0x2202; +//constexpr uint16_t VP_FAN2_CONTROL = 0x2204; +//constexpr uint16_t VP_FAN3_CONTROL = 0x2206; + +// Heater Control Buttons , triged between "cool down" and "heat PLA" state +constexpr uint16_t VP_E0_CONTROL = 0x2210; +constexpr uint16_t VP_E1_CONTROL = 0x2212; +//constexpr uint16_t VP_E2_CONTROL = 0x2214; +//constexpr uint16_t VP_E3_CONTROL = 0x2216; +//constexpr uint16_t VP_E4_CONTROL = 0x2218; +//constexpr uint16_t VP_E5_CONTROL = 0x221A; +constexpr uint16_t VP_BED_CONTROL = 0x221C; + +// Preheat +constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220; +constexpr uint16_t VP_E1_BED_CONTROL = 0x2222; +//constexpr uint16_t VP_E2_BED_CONTROL = 0x2224; +//constexpr uint16_t VP_E3_BED_CONTROL = 0x2226; +//constexpr uint16_t VP_E4_BED_CONTROL = 0x2228; +//constexpr uint16_t VP_E5_BED_CONTROL = 0x222A; + +// Filament load and unload +constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300; +constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2302; + +// Settings store , reset +constexpr uint16_t VP_SETTINGS = 0x2400; + +// PID autotune +constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410; +//constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412; +//constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414; +//constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416; +//constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418; +//constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A; +constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420; + +// Firmware version on the boot screen. +constexpr uint16_t VP_MARLIN_VERSION = 0x3000; +constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. + +// Place for status messages. +constexpr uint16_t VP_M117 = 0x3020; +constexpr uint8_t VP_M117_LEN = 0x20; + +// Temperatures. +constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer +constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer +constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer + +// reserved to support up to 6 Extruders: +//constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer +//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer +//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer +//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer +//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer +//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer +//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer + +constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer +constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer + +constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer +constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer + +// reserved for up to 6 Extruders: +//constexpr uint16_t VP_Flowrate_E2 = 0x3094; +//constexpr uint16_t VP_Flowrate_E3 = 0x3096; +//constexpr uint16_t VP_Flowrate_E4 = 0x3098; +//constexpr uint16_t VP_Flowrate_E5 = 0x309A; + +constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100) +//constexpr uint16_t VP_Fan1_Percentage = 0x33A2; // 2 Byte Integer (0..100) +//constexpr uint16_t VP_Fan2_Percentage = 0x33A4; // 2 Byte Integer (0..100) +//constexpr uint16_t VP_Fan3_Percentage = 0x33A6; // 2 Byte Integer (0..100) + +constexpr uint16_t VP_Feedrate_Percentage = 0x3102; // 2 Byte Integer (0..100) +constexpr uint16_t VP_PrintProgress_Percentage = 0x3104; // 2 Byte Integer (0..100) + +constexpr uint16_t VP_PrintTime = 0x3106; +constexpr uint16_t VP_PrintTime_LEN = 10; + +constexpr uint16_t VP_PrintAccTime = 0x3160; +constexpr uint16_t VP_PrintAccTime_LEN = 32; + +constexpr uint16_t VP_PrintsTotal = 0x3180; +constexpr uint16_t VP_PrintsTotal_LEN = 16; + +// Actual Position +constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy + +constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy + +// SDCard File Listing +constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. +constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there. +constexpr uint16_t VP_SD_FileName0 = 0x3200; +constexpr uint16_t VP_SD_FileName1 = 0x3220; +constexpr uint16_t VP_SD_FileName2 = 0x3240; +constexpr uint16_t VP_SD_FileName3 = 0x3260; +constexpr uint16_t VP_SD_FileName4 = 0x3280; + +constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; // +constexpr uint16_t VP_SD_Print_Filename = 0x32C0; // + +// Fan status +constexpr uint16_t VP_FAN0_STATUS = 0x3300; +constexpr uint16_t VP_FAN1_STATUS = 0x3302; +//constexpr uint16_t VP_FAN2_STATUS = 0x3304; +//constexpr uint16_t VP_FAN3_STATUS = 0x3306; + +// Heater status +constexpr uint16_t VP_E0_STATUS = 0x3310; +//constexpr uint16_t VP_E1_STATUS = 0x3312; +//constexpr uint16_t VP_E2_STATUS = 0x3314; +//constexpr uint16_t VP_E3_STATUS = 0x3316; +//constexpr uint16_t VP_E4_STATUS = 0x3318; +//constexpr uint16_t VP_E5_STATUS = 0x331A; +constexpr uint16_t VP_BED_STATUS = 0x331C; + +constexpr uint16_t VP_MOVE_OPTION = 0x3400; + +// Step per mm +constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4 +//constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602; +constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604; +//constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606; +constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608; +//constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A; +constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610; +//constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612; +//constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614; +//constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616; +//constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618; +//constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A; + +// PIDs +constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4 +constexpr uint16_t VP_E0_PID_I = 0x3702; +constexpr uint16_t VP_E0_PID_D = 0x3704; +constexpr uint16_t VP_BED_PID_P = 0x3710; +constexpr uint16_t VP_BED_PID_I = 0x3712; +constexpr uint16_t VP_BED_PID_D = 0x3714; + +// Wating screen status +constexpr uint16_t VP_WAITING_STATUS = 0x3800; + +// SPs for certain variables... +// located at 0x5000 and up +// Not used yet! +// This can be used e.g to make controls / data display invisible +constexpr uint16_t SP_T_E0_Is = 0x5000; +constexpr uint16_t SP_T_E0_Set = 0x5010; +constexpr uint16_t SP_T_E1_Is = 0x5020; +constexpr uint16_t SP_T_Bed_Is = 0x5030; +constexpr uint16_t SP_T_Bed_Set = 0x5040; diff --git a/Marlin/src/lcd/extensible_ui/ui_api.h b/Marlin/src/lcd/extensible_ui/ui_api.h index ea5eaa8b74..2180587a1e 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.h +++ b/Marlin/src/lcd/extensible_ui/ui_api.h @@ -56,6 +56,7 @@ namespace ExtUI { enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5 }; enum heater_t : uint8_t { H0, H1, H2, H3, H4, H5, BED, CHAMBER }; enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5 }; + enum result_t : uint8_t { PID_BAD_EXTRUDER_NUM, PID_TEMP_TOO_HIGH, PID_TUNING_TIMEOUT, PID_DONE }; constexpr uint8_t extruderCount = EXTRUDERS; constexpr uint8_t hotendCount = HOTENDS; @@ -318,6 +319,12 @@ namespace ExtUI { void onLoadSettings(const char *); void onConfigurationStoreWritten(bool success); void onConfigurationStoreRead(bool success); + #if ENABLED(POWER_LOSS_RECOVERY) + void OnPowerLossResume(); + #endif + #if HAS_PID_HEATING + void OnPidTuning(const result_t rst); + #endif }; /** diff --git a/Marlin/src/lcd/extui_dgus_lcd.cpp b/Marlin/src/lcd/extui_dgus_lcd.cpp index 0da82472b4..04b30acf83 100644 --- a/Marlin/src/lcd/extui_dgus_lcd.cpp +++ b/Marlin/src/lcd/extui_dgus_lcd.cpp @@ -28,7 +28,7 @@ #include "../inc/MarlinConfigPre.h" -#if ENABLED(DGUS_LCD) +#if HAS_DGUS_LCD #include "extensible_ui/ui_api.h" #include "extensible_ui/lib/dgus/DGUSDisplay.h" @@ -88,8 +88,69 @@ namespace ExtUI { void onStatusChanged(const char * const msg) { ScreenHandler.setstatusmessage(msg); } void onFactoryReset() {} - void onLoadSettings() {} - void onStoreSettings() {} -} + void onStoreSettings(char *buff) { + // Called when saving to EEPROM (i.e. M500). If the ExtUI needs + // permanent data to be stored, it can write up to eeprom_data_size bytes + // into buff. -#endif // DGUS_LCD + // Example: + // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // memcpy(buff, &myDataStruct, sizeof(myDataStruct)); + } + + void onLoadSettings(const char *buff) { + // Called while loading settings from EEPROM. If the ExtUI + // needs to retrieve data, it should copy up to eeprom_data_size bytes + // from buff + + // Example: + // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // memcpy(&myDataStruct, buff, sizeof(myDataStruct)); + } + + void onConfigurationStoreWritten(bool success) { + // Called after the entire EEPROM has been written, + // whether successful or not. + } + + void onConfigurationStoreRead(bool success) { + // Called after the entire EEPROM has been read, + // whether successful or not. + } + + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { + // Called when any mesh points are updated + } + + #if ENABLED(POWER_LOSS_RECOVERY) + void OnPowerLossResume() { + // Called on resume from power-loss + ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POWER_LOSS); + } + #endif + + + #if HAS_PID_HEATING + void OnPidTuning(const result_t rst) { + // Called for temperature PID tuning result + SERIAL_ECHOLNPAIR("OnPidTuning:",rst); + switch(rst) { + case PID_BAD_EXTRUDER_NUM: + ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_BAD_EXTRUDER_NUM)); + break; + case PID_TEMP_TOO_HIGH: + ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_TEMP_TOO_HIGH)); + break; + case PID_TUNING_TIMEOUT: + ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_TIMEOUT)); + break; + case PID_DONE: + ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_AUTOTUNE_FINISHED)); + break; + } + ScreenHandler.GotoScreen(DGUSLCD_SCREEN_MAIN); + } + #endif + +} +#endif // HAS_DGUS_LCD diff --git a/Marlin/src/lcd/extui_example.cpp b/Marlin/src/lcd/extui_example.cpp index 595b45e31b..5e65af7381 100644 --- a/Marlin/src/lcd/extui_example.cpp +++ b/Marlin/src/lcd/extui_example.cpp @@ -92,6 +92,18 @@ namespace ExtUI { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { // Called when any mesh points are updated } + + #if ENABLED(POWER_LOSS_RECOVERY) + void OnPowerLossResume() { + // Called on resume from power-loss + } + #endif + + #if HAS_PID_HEATING + void OnPidTuning(const result_t rst) { + // Called for temperature PID tuning result + } + #endif } #endif // EXTUI_EXAMPLE && EXTENSIBLE_UI diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 93b15310a3..056847fb34 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -32,6 +32,9 @@ #include "planner.h" #include "../core/language.h" #include "../HAL/shared/Delay.h" +#if ENABLED(EXTENSIBLE_UI) + #include "../lcd/extensible_ui/ui_api.h" +#endif #if ENABLED(MAX6675_IS_MAX31865) #include "Adafruit_MAX31865.h" @@ -399,6 +402,9 @@ volatile bool Temperature::temp_meas_ready = false; if (target > GHV(BED_MAXTEMP - 10, temp_range[heater].maxtemp - 15)) { SERIAL_ECHOLNPGM(MSG_PID_TEMP_TOO_HIGH); + #if ENABLED(EXTENSIBLE_UI) + ExtUI::OnPidTuning(ExtUI::result_t::PID_TEMP_TOO_HIGH); + #endif return; } @@ -512,6 +518,9 @@ volatile bool Temperature::temp_meas_ready = false; #endif if (current_temp > target + MAX_OVERSHOOT_PID_AUTOTUNE) { SERIAL_ECHOLNPGM(MSG_PID_TEMP_TOO_HIGH); + #if ENABLED(EXTENSIBLE_UI) + ExtUI::OnPidTuning(ExtUI::result_t::PID_TEMP_TOO_HIGH); + #endif break; } @@ -554,6 +563,9 @@ volatile bool Temperature::temp_meas_ready = false; #define MAX_CYCLE_TIME_PID_AUTOTUNE 20L #endif if (((ms - t1) + (ms - t2)) > (MAX_CYCLE_TIME_PID_AUTOTUNE * 60L * 1000L)) { + #if ENABLED(EXTENSIBLE_UI) + ExtUI::OnPidTuning(ExtUI::result_t::PID_TUNING_TIMEOUT); + #endif SERIAL_ECHOLNPGM(MSG_PID_TIMEOUT); break; } @@ -602,6 +614,9 @@ volatile bool Temperature::temp_meas_ready = false; #if ENABLED(PRINTER_EVENT_LEDS) printerEventLEDs.onPidTuningDone(color); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::OnPidTuning(ExtUI::result_t::PID_DONE); + #endif goto EXIT_M303; } @@ -613,6 +628,9 @@ volatile bool Temperature::temp_meas_ready = false; #if ENABLED(PRINTER_EVENT_LEDS) printerEventLEDs.onPidTuningDone(color); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::OnPidTuning(ExtUI::result_t::PID_DONE); + #endif EXIT_M303: #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING) diff --git a/config/default/Configuration.h b/config/default/Configuration.h index f4c9de3a79..7a6e43c7a8 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index fc08d6ec12..04ed57cb73 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 4045424deb..19a9f86e39 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -2062,9 +2062,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 1b585cf14a..4ccf836ec6 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index f868dad746..32b4ceba41 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -2031,9 +2031,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 5d31a9eee7..56c2f38216 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 8480c534a1..4f3a40b447 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -2031,9 +2031,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index b419a1e72a..1ceeb40ac5 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index b8aa5f03e1..ab12550f0c 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -2050,9 +2050,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 8bf3aa19dd..9357c66e79 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index f05b64f6d0..40d9052fdb 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -2110,9 +2110,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 5ba0ede500..1ea78f0ac8 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1244,6 +1244,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 30fb5e0381..c2a23de259 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -2109,9 +2109,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index e203294875..0b94e63ba2 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 2ecf4a56b9..886272fc0e 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index ef179a620f..5de4734de2 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -2041,9 +2041,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 2305d44277..8ed4fb665f 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index b4f57513f8..778003db78 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -2032,9 +2032,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index b9f4612536..b451d580e7 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index a4706fcd93..0582525f08 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -2032,9 +2032,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index b9f4612536..b451d580e7 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 649e67dd75..7ea9c5b6ae 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -2147,9 +2147,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index b35e936cca..0e162a62e0 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 1e430f9541..2712bd81c5 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -2058,9 +2058,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 413222bebe..571450d400 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 8c9f6acf29..64ba8c6019 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -2041,9 +2041,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 644ba73f67..386780cffb 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index d1d58b565d..07096c6b4d 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -2033,9 +2033,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index e3a55712a9..b966de0eec 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index 74f475d06e..73b1c90151 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -2042,9 +2042,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 663698bd8b..30e854a6f4 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 0e0a5bc680..9eecdf442e 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -2040,9 +2040,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index d668601ab9..3db064d92b 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index da245ffa8c..0518a014bc 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -2031,9 +2031,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index e12532d2f1..1b9cfc0bf6 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1247,6 +1247,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index 1609cefb7e..1e2b1dcb06 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -2013,9 +2013,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index e4933f4169..f467710bb6 100755 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index d506f45170..6333dd70c1 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index e4933f4169..f467710bb6 100755 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 465fe578c0..59970428a4 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 2628258f65..9996121208 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 65a7cd0446..9f114209b3 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index f6b8f7e39e..ca810687fd 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index cd0e6ae51a..09726de2d0 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 81e3490175..c98cbcf08a 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -2018,9 +2018,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 6f3552df25..c83d4f31a8 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 5049e6f0e1..4668201496 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -2031,9 +2031,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 9a4a82b6e1..b4d7df8699 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1251,6 +1251,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index f441eccbf5..ae1c81a3ef 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -2018,9 +2018,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 6f3552df25..c83d4f31a8 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h index 9f3528f598..e7a41d5fff 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h @@ -2022,9 +2022,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h index b52ede81b1..5e71b0d259 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h index 663d3d76a5..b74bc7492e 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h @@ -2023,9 +2023,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h index 3fd3b7e264..eea0eb204b 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 78f60f8ce9..608fd1d3ea 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -2029,9 +2029,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index bfc6df8fc0..7eec0a40bd 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 25e843dfcb..89a459ccbb 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -2040,9 +2040,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 4dd69c2cab..ba91ac3e40 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index 28a23666ab..49ac892cc1 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -2031,9 +2031,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 3334a03dcb..bb5496005a 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index e9230f16cb..783c66a268 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -2033,9 +2033,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index f470eed9ad..f3eb54ed9a 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index 07f22247ab..f237fa2b4d 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -2049,9 +2049,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 7aade5aec0..14a7a9c501 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 220ae105c9..2fbeaff254 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index bbd5af9634..de9406fdaf 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index d7a9bd8fc8..268187c82d 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 4d202f0aa3..2644688502 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 8e1375bd7a..5e8cab7215 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -2040,9 +2040,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 3d17a1ae95..3dcc8319b9 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index d20e133b4c..264e2fa1c2 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 5c664e4cbc..cca4edcd42 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index 72eeebeba4..ff83186c57 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index b24ef4c08b..6782e1e80d 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index a3ddb04063..28eeb467fe 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -2040,9 +2040,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 7001ffe75e..59c4c3d76f 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/Ender-5 Pro/Configuration.h b/config/examples/Creality/Ender-5 Pro/Configuration.h index a7391b515f..e1c6ac695a 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration.h @@ -2028,9 +2028,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h index b14e141304..9b6a226745 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index 325cf195d3..fc9d9c1206 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index c3a787e235..a27aea4d97 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 0ba7cfe857..60c28ba082 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 603c4433dc..8887422c99 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 42be60b113..53918b9580 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 933dd94d8a..9bb5b78771 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 8f3b1b4850..953748ab33 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -2040,9 +2040,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 0cf2ee895b..ccba5f8063 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 1e57d6e9e5..7bed9f18e2 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 8790440123..304daa9a77 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h index e8f8621793..7fcec1b34b 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index 9a8d74ba87..3ded301674 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h index a504b958a6..0a58661949 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index 9a8d74ba87..3ded301674 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h index c2f899a86d..8033211077 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index 9a8d74ba87..3ded301674 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h index c545cd3731..47b044aa2e 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index 9a8d74ba87..3ded301674 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 2151127e49..ca245db464 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -2032,9 +2032,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 8acede8536..41e90f693d 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index f8085ca083..a94f3eae29 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index fc08d6ec12..04ed57cb73 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 4fa15b09a4..87e53f4923 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -2011,9 +2011,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 440bebc5dc..00c26086d5 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 99d859d350..155b7c9e5b 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -2011,9 +2011,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 440bebc5dc..00c26086d5 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 0a250de254..f28ae7ac17 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -2023,9 +2023,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index c0637ee696..607fab29d3 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1242,6 +1242,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 7da8f0e249..42276688ef 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -2049,9 +2049,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index c6fa1bb798..118f703ec1 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index f73833e7e7..6be836cc84 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -2149,9 +2149,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index dab6a5ff45..9bb6c7183d 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 26834f82e0..1d04f7bd5f 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -2077,9 +2077,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 9ff1bdc525..50d40f4088 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1247,6 +1247,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index a1029f9a70..76fbd6dc9b 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -2067,9 +2067,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index c7358b68f4..51b5ea7ca9 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1247,6 +1247,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 5c299799c2..9168e421f4 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -2015,9 +2015,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index a7c23f60d5..bc215e621e 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index cb28f7d36b..a0a99a20b1 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -2014,9 +2014,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index d25612aa75..3f57bdd4a3 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 5f5dfe1988..f4305f1f7b 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -2015,9 +2015,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index a08e22fa24..001689fc52 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h index d8eecafc63..cabdcde2c3 100644 --- a/config/examples/Geeetech/A10T/Configuration.h +++ b/config/examples/Geeetech/A10T/Configuration.h @@ -2016,9 +2016,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index a08e22fa24..001689fc52 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 0e27a563be..0eb8eddcbe 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -2016,9 +2016,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 1df6019992..b1392f016b 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 4c8cfa905d..7b5c9deb0d 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -2017,9 +2017,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 1df6019992..b1392f016b 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 7a630df27e..3ebdd3431b 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -2018,9 +2018,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 1df6019992..b1392f016b 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 5ee53d97d8..f593862c83 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -2018,9 +2018,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 6f6d840dfa..1f5ae3a092 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 520096e182..a0dba40fc3 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -2018,9 +2018,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 77e7de2314..408cee4226 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 9e4565a5e0..46bac2e470 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -2019,9 +2019,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 6f6d840dfa..1f5ae3a092 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index ed77ba8691..0f9bd0c8e5 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -2045,9 +2045,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 78a8e122b8..f714e92c07 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 9cb24191ee..ef3676fb97 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -2018,9 +2018,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 77e7de2314..408cee4226 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 3f70e0b0b3..2ac618aba0 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -2037,9 +2037,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index e5bef9ed6e..0a38e9465d 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index d7b95673d9..3fb851e7b4 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -2051,9 +2051,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index cacbe58b5f..44bfce6ca2 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index b64f15c9fe..2ab21baacb 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -2051,9 +2051,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index ee2b74d8d0..ccfb7fb924 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -2050,9 +2050,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index cc2b164299..ce44ee8bba 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index a7c23f60d5..bc215e621e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index e92c9691f2..7230a3393a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index a7c23f60d5..bc215e621e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index d0a47d0984..134fc5c8ec 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -2019,9 +2019,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 3bcea17048..7a51faedf1 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1235,6 +1235,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index d735ecb2b4..fc456ea501 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 4029fdcc5b..37802a4624 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index f52b9315b1..f8a74df56d 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -2038,9 +2038,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 711938d042..9035806b4b 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1248,6 +1248,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index b69459a0e9..25e29728ac 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -2042,9 +2042,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 29d9f5c436..e4d05182b9 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index b943798909..7b99344e19 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -2038,9 +2038,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 711938d042..9035806b4b 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1248,6 +1248,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 81e5fbafbd..08ed04fef7 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index caa2167a79..7542701fd8 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration.h b/config/examples/MakerFarm/Pegasus_12/Configuration.h index c97b699c0d..112e2cc306 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h index d553d56699..8ddba43d72 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 152bd6c001..a191e352c0 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 94b79c90f6..a3a99987e4 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 59944e785e..07219b5df5 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -2071,9 +2071,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index aa3139ec34..a71325f2a0 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 344afe1eca..e3189cc49d 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -2040,9 +2040,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 68aaf7c623..25842a8ae4 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index fd815cfda6..ccc34bd811 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 9d72a3bbf5..4086b45775 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index e1a9964e3f..fb946ba21a 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index fca9d2d624..babfbde959 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -2032,9 +2032,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 4e639ce361..90c9dbab43 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 999ca42fe4..32a6a75270 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -2037,9 +2037,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 7c96eadfe9..819da9ab90 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -2036,9 +2036,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 45d33ad475..20adee1f6e 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -2029,9 +2029,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index d637d6697e..49fdbf982c 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1244,6 +1244,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 265bd2a89b..338a3d0d0e 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -2029,9 +2029,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 2ab0a2cbce..dbde1ff15b 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 201ecb454e..5ee603316e 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 8b29507047..c10d588d1b 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index afc00f120f..997a15a401 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 761b5141e7..8639ee4cb1 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -2038,9 +2038,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 61241751b1..d25a5d025e 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 093bb70d01..b40a649c77 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -2038,9 +2038,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 61241751b1..d25a5d025e 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index fe43bf3939..7b79add146 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -2038,9 +2038,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 61241751b1..d25a5d025e 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 556cbdf1b7..4e239b612e 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -2079,9 +2079,11 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index b4fcfbe7ef..8cd66e053d 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index c128c4bd1a..f05a8bf384 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 466d31a5e9..72bea9fb26 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 481931ceec..742a156580 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -2064,9 +2064,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 17b9a837dc..2f0d7107c7 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -2052,9 +2052,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 1131659bac..1afcdb5e25 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1240,6 +1240,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index d99df3ab94..93095ac87e 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index a28a5688c3..05e01fcbfa 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index c6ff3bf84b..c155063179 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -2032,9 +2032,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index f1891656b0..6640cfe33c 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index 050b62fcb5..bb45a51bb8 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -2032,9 +2032,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index c9b13af47f..81a7b8cff6 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -2061,9 +2061,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 088f95bf6f..6ee203a516 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 9fe657810f..7f46a5ae4f 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 537e65b3e9..12c0e2469c 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index d696775627..e7b0190e13 100755 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -2014,9 +2014,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 99cd1a3502..c02e567ca7 100755 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index f0e7424b1e..3cb8bb9316 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 4747bfb0cc..90e4034a72 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index ca23e8f0b7..2de02db8c9 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index ed24139108..c04ec1ff80 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index ce6621f30a..135d0ae0ab 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index ed24139108..c04ec1ff80 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 4a26fa30c5..89ea0ddb5d 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 974fb25175..a05c1b8265 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index d1bbd3489b..6f2cb54c68 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -2086,9 +2086,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 10fb31fa6d..f0ae23b3f1 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 275486ad97..e6003502e5 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 8e5167df17..933747adf7 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -2034,9 +2034,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 2e8cb0d0cd..f85383b0fb 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index f7a28972c5..bd1d61d530 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -2051,9 +2051,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 77f538c850..75236c8bb1 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 127b0223e8..d7d60d718a 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 2d8a472726..b2410849e8 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -2041,9 +2041,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 7948ee3e67..9d2d97752f 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 402b3f97a8..47b8d9e46e 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 497aeefd80..4e314f9742 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index df9c3b785e..19092a5c5a 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 21b2c73fbd..b78baec6fe 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -2039,9 +2039,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index b0d84a49dd..9301901808 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 87d709b994..3a4afbb51e 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -2065,9 +2065,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 38da343798..51640c0a5c 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1256,6 +1256,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 52eaa0ba2b..c62046c3a1 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 5ea02a1d7b..344b75b213 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index e9f245548a..b9369f5f0f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 5ea02a1d7b..344b75b213 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index d1c7efb8be..56bde3b943 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -2049,9 +2049,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index e46345be29..0604afed73 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 3e65688f70..3b6be37b07 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -2041,9 +2041,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index c995032c6c..9f18c62886 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 924534778c..7b2aa819ef 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -2041,9 +2041,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 54cb665a1a..f4eecf9d66 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index b13e2f917d..d8c07824b2 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 9565b48aab..f33bdfa102 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 8090265ca0..3e555758f7 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -2030,9 +2030,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 17655b7c4f..6cc143591e 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -2198,9 +2198,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index cd75495cc5..67f224a1e9 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index bc468675f4..b199ba3ed9 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -2137,9 +2137,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index a56327fa8c..008d05a5b7 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 9baa175579..1d983066ff 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -2148,9 +2148,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 377d6bf76b..bce8576ae6 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 661d22f3e6..b950945faf 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -2140,9 +2140,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 1707dfb1e6..86bcf015ac 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 5981959acc..8b1ba9e435 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -2142,9 +2142,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 0fea824315..b5fdd58180 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 9c83d854bf..9038dced2e 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -2141,9 +2141,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 0fea824315..b5fdd58180 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 9a9fa193b0..e80036cd0d 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -2141,9 +2141,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index fc14582482..8d3a5f3028 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 70f4a84388..53a578b31c 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -2130,9 +2130,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 528e77f3e6..f7ba1d7d90 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index f73db46766..0a8356e2ac 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -2157,9 +2157,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 6b8d3f7c0b..b82ab39bca 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -2128,9 +2128,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 79dae76c1e..512ff39297 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 80d9dd4246..d33c684304 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -2133,9 +2133,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 5a494e6a5a..fffdb639fb 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index a97db154d0..48e1c88a48 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -2129,9 +2129,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index fc14582482..8d3a5f3028 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 2db05a955c..7bcca3ea38 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -2135,9 +2135,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3629c38fa9..4ef59e440b 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 2c30be0988..1deecc1299 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -2131,9 +2131,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index fc14582482..8d3a5f3028 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 9e46ce340a..4f88cd6f1d 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -2131,9 +2131,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 68b59f614d..3fe3959cc8 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -2132,9 +2132,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 2c361fe1d2..d61a8e293a 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1245,6 +1245,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 692db8d47a..a67df879c1 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -2057,9 +2057,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 7b64f5c6a1..4e68fb7716 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 3e24b4c140..ef681b6d88 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -2033,9 +2033,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 660a318925..a719f7e5d4 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index ec8150352b..53af17032d 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -2025,9 +2025,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index fc2376595f..9a9665c77c 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1243,6 +1243,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index a776155ffb..a68906376c 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -2035,9 +2035,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index 06785302d2..6c16455545 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -1244,6 +1244,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) //