From e5771346a42d327820328ca0e43ebdc6dd27ee2a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 2 Mar 2016 02:00:34 -0800 Subject: [PATCH] Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags --- Marlin/Conditionals.h | 14 ++++-- Marlin/Configuration.h | 16 ++++++- Marlin/SanityCheck.h | 13 ++++++ .../Felix/Configuration.h | 16 ++++++- .../Felix/Configuration_DUAL.h | 16 ++++++- .../Hephestos/Configuration.h | 16 ++++++- .../K8200/Configuration.h | 16 ++++++- .../RepRapWorld/Megatronics/Configuration.h | 16 ++++++- .../RigidBot/Configuration.h | 16 ++++++- .../SCARA/Configuration.h | 16 ++++++- .../TAZ4/Configuration.h | 16 ++++++- .../WITBOX/Configuration.h | 16 ++++++- .../adafruit/ST7565/Configuration.h | 16 ++++++- .../delta/biv2.5/Configuration.h | 16 ++++++- .../delta/generic/Configuration.h | 16 ++++++- .../delta/kossel_mini/Configuration.h | 16 ++++++- .../delta/kossel_pro/Configuration.h | 16 ++++++- .../makibox/Configuration.h | 16 ++++++- .../tvrrug/Round2/Configuration.h | 16 ++++++- Marlin/pins.h | 46 ++++++------------- Marlin/pins_FELIX2.h | 2 - 21 files changed, 276 insertions(+), 71 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index 91760045d7..7e6e64c915 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -275,17 +275,25 @@ #include "Arduino.h" /** - * ENDSTOPPULLUPS + * Set ENDSTOPPULLUPS for unused endstop switches */ #if ENABLED(ENDSTOPPULLUPS) - #if DISABLED(DISABLE_MAX_ENDSTOPS) + #if DISABLED(USE_XMAX_PLUG) #define ENDSTOPPULLUP_XMAX + #endif + #if DISABLED(USE_YMAX_PLUG) #define ENDSTOPPULLUP_YMAX + #endif + #if DISABLED(USE_ZMAX_PLUG) #define ENDSTOPPULLUP_ZMAX #endif - #if DISABLED(DISABLE_MIN_ENDSTOPS) + #if DISABLED(USE_XMIN_PLUG) #define ENDSTOPPULLUP_XMIN + #endif + #if DISABLED(USE_YMIN_PLUG) #define ENDSTOPPULLUP_YMIN + #endif + #if DISABLED(USE_ZMIN_PLUG) #define ENDSTOPPULLUP_ZMIN #endif #if DISABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 8debc70bd7..ddd72d11a0 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -346,8 +346,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -370,8 +384,6 @@ const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index fb45e77b9f..c1edb4a5b4 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -419,6 +419,17 @@ #error TEMP_SENSOR_0 is required. #endif +/** + * Endstops + */ +#if DISABLED(HAS_ENDSTOP_X_MIN) && DISABLED(HAS_ENDSTOP_X_MAX) + #error You must enable HAS_ENDSTOP_X_MIN or HAS_ENDSTOP_X_MAX +#elif DISABLED(HAS_ENDSTOP_Y_MIN) && DISABLED(HAS_ENDSTOP_Y_MAX) + #error You must enable HAS_ENDSTOP_Y_MIN or HAS_ENDSTOP_Y_MAX +#elif DISABLED(HAS_ENDSTOP_Z_MIN) && DISABLED(HAS_ENDSTOP_Z_MAX) + #error You must enable HAS_ENDSTOP_Z_MIN or HAS_ENDSTOP_Z_MAX +#endif + /** * Warnings for old configurations */ @@ -456,6 +467,8 @@ #error Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead. #elif defined(FILAMENT_SENSOR) #error FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead. +#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) + #error DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated - set USE_*_ENDSTOP flags instead #endif #endif //SANITYCHECK_H diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 3fd1646da8..e91e927c8a 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -328,8 +328,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -352,8 +366,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index 553c2dc60e..29507abaad 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -325,8 +325,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -349,8 +363,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 1d6faab46d..cac62233ff 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -338,8 +338,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -362,8 +376,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index e803d3e2b0..3bb350ddd4 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -363,8 +363,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -387,8 +401,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 80e9d35190..487e8d8764 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -346,8 +346,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -370,8 +384,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 3147bb0e0c..e5c98d4791 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -340,8 +340,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -364,8 +378,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 2320abc067..c09a7ae820 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -354,8 +354,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -378,8 +392,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 8c7fb0388c..7dd94b7ae5 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -367,8 +367,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -391,8 +405,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 9d6c5b7f2d..6f96bbf422 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -338,8 +338,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -362,8 +376,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 8effe9d891..9620b49ffa 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -346,8 +346,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -370,8 +384,6 @@ const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index 647ef1258c..58c2240c36 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -381,8 +381,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -405,8 +419,6 @@ const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -#define DISABLE_MIN_ENDSTOPS // Deltas only use min endstops for probing. //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 93d7f8ad7d..5beb3f4b54 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -381,8 +381,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -405,8 +419,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -#define DISABLE_MIN_ENDSTOPS // Deltas only use min endstops for probing. //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index cde4707f30..d88d12dc6e 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -381,8 +381,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -405,8 +419,6 @@ const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS // Deltas only use min endstops for probing. //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 5255b7accc..6d769fb329 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -370,8 +370,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -394,8 +408,6 @@ const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS // Deltas only use min endstops for probing. //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index bd550066c7..6ccd700aa6 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -349,8 +349,22 @@ // Enable this option for Toshiba steppers //#define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -373,8 +387,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index b7431e9d25..85f2258f4d 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -336,8 +336,22 @@ // Enable this option for Toshiba steppers #define CONFIG_STEPPERS_TOSHIBA +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + // @section homing +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -360,8 +374,6 @@ const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -//#define DISABLE_MAX_ENDSTOPS -//#define DISABLE_MIN_ENDSTOPS //=========================================================================== //============================= Z Probe Options ============================= diff --git a/Marlin/pins.h b/Marlin/pins.h index 4afa2b6160..eb37f87af9 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -209,55 +209,37 @@ #endif #endif -#if ENABLED(DISABLE_MAX_ENDSTOPS) - #undef X_MAX_PIN - #undef Y_MAX_PIN - #undef Z_MAX_PIN - #define X_MAX_PIN -1 - #define Y_MAX_PIN -1 - #define Z_MAX_PIN -1 -#endif - -#if ENABLED(DISABLE_MIN_ENDSTOPS) - #undef X_MIN_PIN - #undef Y_MIN_PIN - #undef Z_MIN_PIN - #define X_MIN_PIN -1 - #define Y_MIN_PIN -1 - #define Z_MIN_PIN -1 -#endif - #if ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) || DISABLED(Z_MIN_PROBE_ENDSTOP) // Allow code to compile regardless of Z_MIN_PROBE_ENDSTOP setting. #undef Z_MIN_PROBE_PIN #define Z_MIN_PROBE_PIN -1 #endif -#if ENABLED(DISABLE_XMAX_ENDSTOP) +#if DISABLED(USE_XMAX_PLUG) #undef X_MAX_PIN #define X_MAX_PIN -1 #endif -#if ENABLED(DISABLE_XMIN_ENDSTOP) - #undef X_MIN_PIN - #define X_MIN_PIN -1 -#endif - -#if ENABLED(DISABLE_YMAX_ENDSTOP) +#if DISABLED(USE_YMAX_PLUG) #undef Y_MAX_PIN #define Y_MAX_PIN -1 #endif -#if ENABLED(DISABLE_YMIN_ENDSTOP) - #undef Y_MIN_PIN - #define Y_MIN_PIN -1 -#endif - -#if ENABLED(DISABLE_ZMAX_ENDSTOP) +#if DISABLED(USE_ZMAX_PLUG) #undef Z_MAX_PIN #define Z_MAX_PIN -1 #endif -#if ENABLED(DISABLE_ZMIN_ENDSTOP) +#if DISABLED(USE_XMIN_PLUG) + #undef X_MIN_PIN + #define X_MIN_PIN -1 +#endif + +#if DISABLED(USE_YMIN_PLUG) + #undef Y_MIN_PIN + #define Y_MIN_PIN -1 +#endif + +#if DISABLED(USE_ZMIN_PLUG) #undef Z_MIN_PIN #define Z_MIN_PIN -1 #endif diff --git a/Marlin/pins_FELIX2.h b/Marlin/pins_FELIX2.h index 79d8332ada..e5aa87922b 100644 --- a/Marlin/pins_FELIX2.h +++ b/Marlin/pins_FELIX2.h @@ -29,8 +29,6 @@ #undef HEATER_1_PIN #define HEATER_1_PIN 7 // EXTRUDER 2 -#define DISABLE_MAX_ENDSTOPS - #undef SDPOWER #define SDPOWER 1