diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index d58c4d0427..13d0cd30d3 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -96,7 +96,7 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+  #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
 #endif
 
 /**
@@ -142,11 +142,6 @@
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
 
-// Choose the name from boards.h that matches your setup
-#ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
-#endif
-
 // Name displayed in the LCD "Ready" message and Info menu
 #define CUSTOM_MACHINE_NAME "x301"
 
@@ -1184,7 +1179,7 @@
  *     |    [-]    |
  *     O-- FRONT --+
  */
-#define NOZZLE_TO_PROBE_OFFSET { -20, 14, -1.475 }
+#define NOZZLE_TO_PROBE_OFFSET { -20, 14, -1.63 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1607,8 +1602,8 @@
     #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for G26.
     #define MESH_TEST_HOTEND_TEMP  200    // (°C) Default nozzle temperature for G26.
     #define MESH_TEST_BED_TEMP      60    // (°C) Default bed temperature for G26.
-    #define G26_XY_FEEDRATE         50    // (mm/s) Feedrate for G26 XY moves.
-    #define G26_XY_FEEDRATE_TRAVEL 200    // (mm/s) Feedrate for G26 XY travel moves.
+    #define G26_XY_FEEDRATE         20    // (mm/s) Feedrate for G26 XY moves.
+    #define G26_XY_FEEDRATE_TRAVEL 100    // (mm/s) Feedrate for G26 XY travel moves.
     #define G26_RETRACT_MULTIPLIER   1.0  // G26 Q (retraction) used by default between mesh test elements.
   #endif
 
@@ -1649,8 +1644,8 @@
 
   #define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
-  #define GRID_MAX_POINTS_X 15      // Don't use more than 15 points per axis, implementation limited.
+  #define MESH_INSET 21              // Set Mesh bounds as an inset region of the bed
+  #define GRID_MAX_POINTS_X 5      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   #define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points