diff --git a/.gitignore b/.gitignore index ac2c9b5591..bc603ba38b 100755 --- a/.gitignore +++ b/.gitignore @@ -143,7 +143,11 @@ vc-fileutils.settings .vscode/launch.json .vscode/*.db -# cmake +#Simulation +imgui.ini +eeprom.dat + +#cmake CMakeLists.txt src/CMakeLists.txt CMakeListsPrivate.txt diff --git a/Marlin/src/HAL/NATIVE_SIM/HAL.h b/Marlin/src/HAL/NATIVE_SIM/HAL.h new file mode 100644 index 0000000000..d5c5782c36 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/HAL.h @@ -0,0 +1,217 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define CPU_32_BIT +#define HAL_IDLETASK +void HAL_idletask(); + +#define F_CPU 100000000 +#define SystemCoreClock F_CPU +#include +#include + +#undef min +#undef max + +#include +#include "pinmapping.h" + +void _printf (const char *format, ...); +void _putc(uint8_t c); +uint8_t _getc(); + +//extern "C" volatile uint32_t _millis; + +//arduino: Print.h +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +//arduino: binary.h (weird defines) +#define B01 1 +#define B10 2 + +#include "../shared/Marduino.h" +#include "../shared/math_32bit.h" +#include "../shared/HAL_SPI.h" +#include "fastio.h" +#include "watchdog.h" +#include "serial.h" + +#define SHARED_SERVOS HAS_SERVOS + +extern MSerialT serial_stream_0; +extern MSerialT serial_stream_1; +extern MSerialT serial_stream_2; +extern MSerialT serial_stream_3; + +#define _MSERIAL(X) serial_stream_##X +#define MSERIAL(X) _MSERIAL(X) + +#if WITHIN(SERIAL_PORT, 0, 3) + #define MYSERIAL1 MSERIAL(SERIAL_PORT) +#else + #error "SERIAL_PORT must be from 0 to 3. Please update your configuration." +#endif + +#ifdef SERIAL_PORT_2 + #if WITHIN(SERIAL_PORT_2, 0, 3) + #define MYSERIAL2 MSERIAL(SERIAL_PORT_2) + #else + #error "SERIAL_PORT_2 must be from 0 to 3. Please update your configuration." + #endif +#endif + +#ifdef MMU2_SERIAL_PORT + #if WITHIN(MMU2_SERIAL_PORT, 0, 3) + #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT) + #else + #error "MMU2_SERIAL_PORT must be from 0 to 3. Please update your configuration." + #endif +#endif + +#ifdef LCD_SERIAL_PORT + #if WITHIN(LCD_SERIAL_PORT, 0, 3) + #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT) + #else + #error "LCD_SERIAL_PORT must be from 0 to 3. Please update your configuration." + #endif +#endif + + +#define ST7920_DELAY_1 DELAY_NS(600) +#define ST7920_DELAY_2 DELAY_NS(750) +#define ST7920_DELAY_3 DELAY_NS(750) + +// +// Interrupts +// +#define CRITICAL_SECTION_START() +#define CRITICAL_SECTION_END() +#define ISRS_ENABLED() +#define ENABLE_ISRS() +#define DISABLE_ISRS() + +inline void HAL_init() {} + +// Utility functions +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-function" +int freeMemory(); +#pragma GCC diagnostic pop + +// ADC +#define HAL_ADC_VREF 5.0 +#define HAL_ADC_RESOLUTION 10 +#define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch) +#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch) +#define HAL_READ_ADC() HAL_adc_get_result() +#define HAL_ADC_READY() true + +void HAL_adc_init(); +void HAL_adc_enable_channel(const uint8_t ch); +void HAL_adc_start_conversion(const uint8_t ch); +uint16_t HAL_adc_get_result(); + +// Reset source +inline void HAL_clear_reset_source(void) {} +inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; } + +/* ---------------- Delay in cycles */ + +#define DELAY_CYCLES(x) Kernel::delayCycles(x) +#define SYSTEM_YIELD() Kernel::yield() + +// Maple Compatibility +typedef void (*systickCallback_t)(void); +void systick_attach_callback(systickCallback_t cb); +extern volatile uint32_t systick_uptime_millis; + +// Marlin uses strstr in constexpr context, this is not supported, workaround by defining constexpr versions of the required functions. +#define strstr(a, b) strstr_constexpr((a), (b)) + +constexpr inline std::size_t strlen_constexpr(const char* str) { + // https://github.com/gcc-mirror/gcc/blob/5c7634a0e5f202935aa6c11b6ea953b8bf80a00a/libstdc%2B%2B-v3/include/bits/char_traits.h#L329 + if (str != nullptr) { + std::size_t i = 0; + while (str[i] != '\0') { + ++i; + } + + return i; + } + + return 0; +} + +constexpr inline int strncmp_constexpr(const char* lhs, const char* rhs, std::size_t count) { + // https://github.com/gcc-mirror/gcc/blob/13b9cbfc32fe3ac4c81c4dd9c42d141c8fb95db4/libstdc%2B%2B-v3/include/bits/char_traits.h#L655 + if (lhs == nullptr || rhs == nullptr) { + return rhs != nullptr ? -1 : 1; + } + + for (std::size_t i = 0; i < count; ++i) { + if (lhs[i] != rhs[i]) { + return lhs[i] < rhs[i] ? -1 : 1; + } else if (lhs[i] == '\0') { + return 0; + } + } + + return 0; +} + +constexpr inline const char* strstr_constexpr(const char* str, const char* target) { + // https://github.com/freebsd/freebsd/blob/master/sys/libkern/strstr.c + if (char c = target != nullptr ? *target++ : '\0'; c != '\0' && str != nullptr) { + std::size_t len = strlen_constexpr(target); + do { + char sc = {}; + do { + if ((sc = *str++) == '\0') { + return nullptr; + } + } while (sc != c); + } while (strncmp_constexpr(str, target, len) != 0); + --str; + } + + return str; +} + +constexpr inline char* strstr_constexpr(char* str, const char* target) { + // https://github.com/freebsd/freebsd/blob/master/sys/libkern/strstr.c + if (char c = target != nullptr ? *target++ : '\0'; c != '\0' && str != nullptr) { + std::size_t len = strlen_constexpr(target); + do { + char sc = {}; + do { + if ((sc = *str++) == '\0') { + return nullptr; + } + } while (sc != c); + } while (strncmp_constexpr(str, target, len) != 0); + --str; + } + return str; +} diff --git a/Marlin/src/HAL/NATIVE_SIM/MarlinSPI.h b/Marlin/src/HAL/NATIVE_SIM/MarlinSPI.h new file mode 100644 index 0000000000..b5cc6f02a4 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/MarlinSPI.h @@ -0,0 +1,26 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include + +using MarlinSPI = SPIClass; diff --git a/Marlin/src/HAL/NATIVE_SIM/fastio.h b/Marlin/src/HAL/NATIVE_SIM/fastio.h new file mode 100644 index 0000000000..de8013b1e5 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/fastio.h @@ -0,0 +1,111 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Fast I/O Routines for X86_64 + */ + +#include "../shared/Marduino.h" +#include + +#define SET_DIR_INPUT(IO) Gpio::setDir(IO, 1) +#define SET_DIR_OUTPUT(IO) Gpio::setDir(IO, 0) + +#define SET_MODE(IO, mode) Gpio::setMode(IO, mode) + +#define WRITE_PIN_SET(IO) Gpio::set(IO) +#define WRITE_PIN_CLR(IO) Gpio::clear(IO) + +#define READ_PIN(IO) Gpio::get(IO) +#define WRITE_PIN(IO,V) Gpio::set(IO, V) + +/** + * Magic I/O routines + * + * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); + * + * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + */ + +/// Read a pin +#define _READ(IO) READ_PIN(IO) + +/// Write to a pin +#define _WRITE(IO,V) WRITE_PIN(IO,V) + +/// toggle a pin +#define _TOGGLE(IO) _WRITE(IO, !READ(IO)) + +/// set pin as input +#define _SET_INPUT(IO) SET_DIR_INPUT(IO) + +/// set pin as output +#define _SET_OUTPUT(IO) SET_DIR_OUTPUT(IO) + +/// set pin as input with pullup mode +#define _PULLUP(IO,V) pinMode(IO, (V) ? INPUT_PULLUP : INPUT) + +/// set pin as input with pulldown mode +#define _PULLDOWN(IO,V) pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT) + +// hg42: all pins can be input or output (I hope) +// hg42: undefined pins create compile error (IO, is no pin) +// hg42: currently not used, but was used by pinsDebug + +/// check if pin is an input +#define _IS_INPUT(IO) (IO >= 0) + +/// check if pin is an output +#define _IS_OUTPUT(IO) (IO >= 0) + +/// Read a pin wrapper +#define READ(IO) _READ(IO) + +/// Write to a pin wrapper +#define WRITE(IO,V) _WRITE(IO,V) + +/// toggle a pin wrapper +#define TOGGLE(IO) _TOGGLE(IO) + +/// set pin as input wrapper +#define SET_INPUT(IO) _SET_INPUT(IO) +/// set pin as input with pullup wrapper +#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0) +/// set pin as input with pulldown wrapper +#define SET_INPUT_PULLDOWN(IO) do{ _SET_INPUT(IO); _PULLDOWN(IO, HIGH); }while(0) +/// set pin as output wrapper - reads the pin and sets the output to that value +#define SET_OUTPUT(IO) do{ _WRITE(IO, _READ(IO)); _SET_OUTPUT(IO); }while(0) +// set pin as PWM +#define SET_PWM(IO) SET_OUTPUT(IO) + +/// check if pin is an input wrapper +#define IS_INPUT(IO) _IS_INPUT(IO) +/// check if pin is an output wrapper +#define IS_OUTPUT(IO) _IS_OUTPUT(IO) + +// Shorthand +#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) + +// digitalRead/Write wrappers +#define extDigitalRead(IO) digitalRead(IO) +#define extDigitalWrite(IO,V) digitalWrite(IO,V) diff --git a/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_LCD.h b/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_LCD.h new file mode 100644 index 0000000000..1ac02f1182 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_LCD.h @@ -0,0 +1,22 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once diff --git a/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_adv.h b/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_adv.h new file mode 100644 index 0000000000..69b6b4848f --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_adv.h @@ -0,0 +1,31 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +// Add strcmp_P if missing +#ifndef strcmp_P + #define strcmp_P(a, b) strcmp((a), (b)) +#endif + +#ifndef strcat_P + #define strcat_P(dest, src) strcat((dest), (src)) +#endif diff --git a/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_post.h b/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_post.h new file mode 100644 index 0000000000..1ac02f1182 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_post.h @@ -0,0 +1,22 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once diff --git a/Marlin/src/HAL/NATIVE_SIM/inc/SanityCheck.h b/Marlin/src/HAL/NATIVE_SIM/inc/SanityCheck.h new file mode 100644 index 0000000000..104af9af5b --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/inc/SanityCheck.h @@ -0,0 +1,43 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Test X86_64-specific configuration values for errors at compile-time. + */ + +// Emulating RAMPS +#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11) + #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector" +#endif + +#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY + #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on LINUX." +#endif + +#if HAS_TMC_SW_SERIAL + #error "TMC220x Software Serial is not supported on LINUX." +#endif + +#if ENABLED(POSTMORTEM_DEBUGGING) + #error "POSTMORTEM_DEBUGGING is not yet supported on LINUX." +#endif diff --git a/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h b/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h new file mode 100644 index 0000000000..2aeeb52e92 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h @@ -0,0 +1,59 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Support routines for X86_64 + */ + +/** + * Translation of routines & variables used by pinsDebug.h + */ + +#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS +#define pwm_details(pin) pin = pin // do nothing // print PWM details +#define pwm_status(pin) false //Print a pin's PWM status. Return true if it's currently a PWM pin. +#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0) +#define digitalRead_mod(p) digitalRead(p) +#define PRINT_PORT(p) +#define GET_ARRAY_PIN(p) pin_array[p].pin +#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) +#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0) +#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin + +// active ADC function/mode/code values for PINSEL registers +constexpr int8_t ADC_pin_mode(pin_t pin) { + return (-1); +} + +int8_t get_pin_mode(pin_t pin) { + if (!VALID_PIN(pin)) return -1; + return 0; +} + +bool GET_PINMODE(pin_t pin) { + int8_t pin_mode = get_pin_mode(pin); + if (pin_mode == -1 || pin_mode == ADC_pin_mode(pin)) // found an invalid pin or active analog pin + return false; + + return (Gpio::getMode(pin) != 0); //input/output state +} + +bool GET_ARRAY_IS_DIGITAL(pin_t pin) { + return (!IS_ANALOG(pin) || get_pin_mode(pin) != ADC_pin_mode(pin)); +} diff --git a/Marlin/src/HAL/NATIVE_SIM/servo_private.h b/Marlin/src/HAL/NATIVE_SIM/servo_private.h new file mode 100644 index 0000000000..06be1893f6 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/servo_private.h @@ -0,0 +1,80 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + * Copyright (c) 2009 Michael Margolis. All right reserved. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * Based on "servo.h - Interrupt driven Servo library for Arduino using 16 bit timers - + * Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. + * + * The only modification was to update/delete macros to match the LPC176x. + * + */ + +#include + +// Macros +//values in microseconds +#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo +#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo +#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached +#define REFRESH_INTERVAL 20000 // minimum time to refresh servos in microseconds + +#define MAX_SERVOS 4 + +#define INVALID_SERVO 255 // flag indicating an invalid servo index + + +// Types + +typedef struct { + uint8_t nbr : 8 ; // a pin number from 0 to 254 (255 signals invalid pin) + uint8_t isActive : 1 ; // true if this channel is enabled, pin not pulsed if false +} ServoPin_t; + +typedef struct { + ServoPin_t Pin; + unsigned int pulse_width; // pulse width in microseconds +} ServoInfo_t; + +// Global variables + +extern uint8_t ServoCount; +extern ServoInfo_t servo_info[MAX_SERVOS]; diff --git a/Marlin/src/HAL/NATIVE_SIM/spi_pins.h b/Marlin/src/HAL/NATIVE_SIM/spi_pins.h new file mode 100644 index 0000000000..a5138e0ccb --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/spi_pins.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../../core/macros.h" +#include "../../inc/MarlinConfigPre.h" + +#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN) + #define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently + // needed due to the speed and mode required for communicating with each device being different. + // This requirement can be removed if the SPI access to these devices is updated to use + // spiBeginTransaction. +#endif + +// Onboard SD +//#define SD_SCK_PIN P0_07 +//#define SD_MISO_PIN P0_08 +//#define SD_MOSI_PIN P0_09 +//#define SD_SS_PIN P0_06 + +// External SD +#ifndef SD_SCK_PIN + #define SD_SCK_PIN 50 +#endif +#ifndef SD_MISO_PIN + #define SD_MISO_PIN 51 +#endif +#ifndef SD_MOSI_PIN + #define SD_MOSI_PIN 52 +#endif +#ifndef SD_SS_PIN + #define SD_SS_PIN 53 +#endif +#ifndef SDSS + #define SDSS SD_SS_PIN +#endif diff --git a/Marlin/src/HAL/NATIVE_SIM/tft/tft_spi.h b/Marlin/src/HAL/NATIVE_SIM/tft/tft_spi.h new file mode 100644 index 0000000000..b3e622f19a --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/tft/tft_spi.h @@ -0,0 +1,64 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../../../inc/MarlinConfig.h" + +#ifndef LCD_READ_ID + #define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341) +#endif +#ifndef LCD_READ_ID4 + #define LCD_READ_ID4 0xD3 // Read display identification information (0xD3 on ILI9341) +#endif + +#define DATASIZE_8BIT 8 +#define DATASIZE_16BIT 16 +#define TFT_IO_DRIVER TFT_SPI + +#define DMA_MINC_ENABLE 1 +#define DMA_MINC_DISABLE 0 + +class TFT_SPI { +private: + static uint32_t ReadID(uint16_t Reg); + static void Transmit(uint16_t Data); + static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count); + +public: + // static SPIClass SPIx; + + static void Init(); + static uint32_t GetID(); + static bool isBusy(); + static void Abort(); + + static void DataTransferBegin(uint16_t DataWidth = DATASIZE_16BIT); + static void DataTransferEnd(); + static void DataTransferAbort(); + + static void WriteData(uint16_t Data); + static void WriteReg(uint16_t Reg); + + static void WriteSequence(uint16_t *Data, uint16_t Count); + // static void WriteMultiple(uint16_t Color, uint16_t Count); + static void WriteMultiple(uint16_t Color, uint32_t Count); +}; diff --git a/Marlin/src/HAL/NATIVE_SIM/tft/xpt2046.h b/Marlin/src/HAL/NATIVE_SIM/tft/xpt2046.h new file mode 100644 index 0000000000..9ef1816c7b --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/tft/xpt2046.h @@ -0,0 +1,80 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../../../inc/MarlinConfig.h" + +#if ENABLED(TOUCH_BUTTONS_HW_SPI) + #include +#endif + +#ifndef TOUCH_MISO_PIN + #define TOUCH_MISO_PIN SD_MISO_PIN +#endif +#ifndef TOUCH_MOSI_PIN + #define TOUCH_MOSI_PIN SD_MOSI_PIN +#endif +#ifndef TOUCH_SCK_PIN + #define TOUCH_SCK_PIN SD_SCK_PIN +#endif +#ifndef TOUCH_CS_PIN + #define TOUCH_CS_PIN SD_SS_PIN +#endif +#ifndef TOUCH_INT_PIN + #define TOUCH_INT_PIN -1 +#endif + +#define XPT2046_DFR_MODE 0x00 +#define XPT2046_SER_MODE 0x04 +#define XPT2046_CONTROL 0x80 + +enum XPTCoordinate : uint8_t { + XPT2046_X = 0x10 | XPT2046_CONTROL | XPT2046_DFR_MODE, + XPT2046_Y = 0x50 | XPT2046_CONTROL | XPT2046_DFR_MODE, + XPT2046_Z1 = 0x30 | XPT2046_CONTROL | XPT2046_DFR_MODE, + XPT2046_Z2 = 0x40 | XPT2046_CONTROL | XPT2046_DFR_MODE, +}; + +#if !defined(XPT2046_Z1_THRESHOLD) + #define XPT2046_Z1_THRESHOLD 10 +#endif + +class XPT2046 { +private: + static bool isBusy() { return false; } + + static uint16_t getRawData(const XPTCoordinate coordinate); + static bool isTouched(); + + static inline void DataTransferBegin(); + static inline void DataTransferEnd(); + #if ENABLED(TOUCH_BUTTONS_HW_SPI) + static uint16_t HardwareIO(uint16_t data); + #endif + static uint16_t SoftwareIO(uint16_t data); + static uint16_t IO(uint16_t data = 0); + +public: + #if ENABLED(TOUCH_BUTTONS_HW_SPI) + static SPIClass SPIx; + #endif + + static void Init(); + static bool getRawPoint(int16_t *x, int16_t *y); +}; diff --git a/Marlin/src/HAL/NATIVE_SIM/timers.h b/Marlin/src/HAL/NATIVE_SIM/timers.h new file mode 100644 index 0000000000..c61eb29e76 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/timers.h @@ -0,0 +1,91 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * HAL timers for Linux X86_64 + */ + +#include + +// ------------------------ +// Defines +// ------------------------ + +#define FORCE_INLINE __attribute__((always_inline)) inline + +typedef uint64_t hal_timer_t; +#define HAL_TIMER_TYPE_MAX 0xFFFFFFFFFFFFFFFF + +#define HAL_TIMER_RATE ((SystemCoreClock) / 4) // frequency of timers peripherals + +#ifndef STEP_TIMER_NUM + #define STEP_TIMER_NUM 0 // Timer Index for Stepper +#endif +#ifndef PULSE_TIMER_NUM + #define PULSE_TIMER_NUM STEP_TIMER_NUM +#endif +#ifndef TEMP_TIMER_NUM + #define TEMP_TIMER_NUM 1 // Timer Index for Temperature +#endif +#ifndef SYSTICK_TIMER_NUM + #define SYSTICK_TIMER_NUM 2 // Timer Index for Systick +#endif +#define SYSTICK_TIMER_FREQUENCY 1000 + +#define TEMP_TIMER_RATE 1000000 +#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency + +#define STEPPER_TIMER_RATE HAL_TIMER_RATE // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) +#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs +#define STEPPER_TIMER_PRESCALE (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US) + +#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer +#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE +#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US + +#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM) +#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM) +#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM) + +#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) +#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) + +#ifndef HAL_STEP_TIMER_ISR + #define HAL_STEP_TIMER_ISR() extern "C" void TIMER0_IRQHandler() +#endif +#ifndef HAL_TEMP_TIMER_ISR + #define HAL_TEMP_TIMER_ISR() extern "C" void TIMER1_IRQHandler() +#endif + +void HAL_timer_init(); +void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency); + +void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare); +hal_timer_t HAL_timer_get_compare(const uint8_t timer_num); +hal_timer_t HAL_timer_get_count(const uint8_t timer_num); + +void HAL_timer_enable_interrupt(const uint8_t timer_num); +void HAL_timer_disable_interrupt(const uint8_t timer_num); +bool HAL_timer_interrupt_enabled(const uint8_t timer_num); + +#define HAL_timer_isr_prologue(TIMER_NUM) +#define HAL_timer_isr_epilogue(TIMER_NUM) diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_I2C_routines.cpp b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_I2C_routines.cpp new file mode 100644 index 0000000000..745454394a --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_I2C_routines.cpp @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// adapted from I2C/master/master.c example +// https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html + +#ifdef __PLAT_NATIVE_SIM__ + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +uint8_t u8g_i2c_start(const uint8_t sla) { + return 1; +} + +void u8g_i2c_init(const uint8_t clock_option) { +} + +uint8_t u8g_i2c_send_byte(uint8_t data) { + return 1; +} + +void u8g_i2c_stop() { +} + +#ifdef __cplusplus + } +#endif + +#endif // __PLAT_NATIVE_SIM__ diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_I2C_routines.h b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_I2C_routines.h new file mode 100644 index 0000000000..6d5f91d3ba --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_I2C_routines.h @@ -0,0 +1,37 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#ifdef __cplusplus + extern "C" { +#endif + +void u8g_i2c_init(const uint8_t clock_options); +//uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos); +uint8_t u8g_i2c_start(uint8_t sla); +uint8_t u8g_i2c_send_byte(uint8_t data); +void u8g_i2c_stop(); + +#ifdef __cplusplus + } +#endif + diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_defines.h b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_defines.h new file mode 100644 index 0000000000..44ffbfeb90 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_defines.h @@ -0,0 +1,44 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +void usleep(uint64_t microsec); +// The following are optional depending on the platform. + +// definitions of HAL specific com and device drivers. +uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); +uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); + +// connect U8g com generic com names to the desired driver +#define U8G_COM_SW_SPI u8g_com_sw_spi_fn +#define U8G_COM_ST7920_SW_SPI u8g_com_ST7920_sw_spi_fn + +// let these default for now +#define U8G_COM_HW_SPI u8g_com_null_fn +#define U8G_COM_ST7920_HW_SPI u8g_com_null_fn +#define U8G_COM_SSD_I2C u8g_com_null_fn +#define U8G_COM_PARALLEL u8g_com_null_fn +#define U8G_COM_T6963 u8g_com_null_fn +#define U8G_COM_FAST_PARALLEL u8g_com_null_fn +#define U8G_COM_UC_I2C u8g_com_null_fn + + diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_delay.h b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_delay.h new file mode 100644 index 0000000000..297361cd44 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_delay.h @@ -0,0 +1,43 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * LCD delay routines - used by all the drivers. + * + * These are based on the LPC1768 routines. + * + * Couldn't just call exact copies because the overhead + * results in a one microsecond delay taking about 4µS. + */ + +#ifdef __cplusplus + extern "C" { +#endif + +void U8g_delay(int msec); +void u8g_MicroDelay(); +void u8g_10MicroDelay(); + +#ifdef __cplusplus + } +#endif diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.cpp b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.cpp new file mode 100644 index 0000000000..3b5acc1656 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.cpp @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Low level pin manipulation routines - used by all the drivers. + * + * These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines. + * + * Couldn't just call exact copies because the overhead killed the LCD update speed + * With an intermediate level the softspi was running in the 10-20kHz range which + * resulted in using about about 25% of the CPU's time. + */ + +#ifdef __PLAT_NATIVE_SIM__ + +#include "../fastio.h" +#include "LCD_pin_routines.h" + +#ifdef __cplusplus + extern "C" { +#endif +void u8g_SetPinOutput(uint8_t internal_pin_number){SET_DIR_OUTPUT(internal_pin_number);} +void u8g_SetPinInput(uint8_t internal_pin_number){SET_DIR_INPUT(internal_pin_number);} +void u8g_SetPinLevel(uint8_t pin, uint8_t pin_status){WRITE_PIN(pin, pin_status);} +uint8_t u8g_GetPinLevel(uint8_t pin){return READ_PIN(pin);} +void usleep(uint64_t microsec){ +assert(false); // why we here? +} +#ifdef __cplusplus + } +#endif + +#endif // __PLAT_NATIVE_SIM__ diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.h b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.h new file mode 100644 index 0000000000..c27c84e8c3 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.h @@ -0,0 +1,46 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Low level pin manipulation routines - used by all the drivers. + * + * These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines. + * + * Couldn't just call exact copies because the overhead killed the LCD update speed + * With an intermediate level the softspi was running in the 10-20kHz range which + * resulted in using about about 25% of the CPU's time. + */ + + +#ifdef __cplusplus + extern "C" { +#endif + +void u8g_SetPinOutput(uint8_t internal_pin_number); +void u8g_SetPinInput(uint8_t internal_pin_number); +void u8g_SetPinLevel(uint8_t pin, uint8_t pin_status); +uint8_t u8g_GetPinLevel(uint8_t pin); + +#ifdef __cplusplus + } +#endif diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_st7920_sw_spi.cpp b/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_st7920_sw_spi.cpp new file mode 100644 index 0000000000..e95c6ebfbd --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_st7920_sw_spi.cpp @@ -0,0 +1,171 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Based on u8g_com_st7920_hw_spi.c + * + * Universal 8bit Graphics Library + * + * Copyright (c) 2011, olikraus@gmail.com + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifdef __PLAT_NATIVE_SIM__ + +#include "../../../inc/MarlinConfig.h" + +#if ENABLED(U8GLIB_ST7920) + +#include +#include "../../shared/Delay.h" + +#undef SPI_SPEED +#define SPI_SPEED 6 +#define SPI_DELAY_CYCLES (1 + SPI_SPEED * 10) + +static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL; +static uint8_t SPI_speed = 0; + +static uint8_t swSpiTransfer(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin) { + for (uint8_t i = 0; i < 8; i++) { + WRITE_PIN(mosi_pin, !!(b & 0x80)); + DELAY_CYCLES(SPI_SPEED); + WRITE_PIN(sck_pin, HIGH); + DELAY_CYCLES(SPI_SPEED); + b <<= 1; + if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1; + WRITE_PIN(sck_pin, LOW); + DELAY_CYCLES(SPI_SPEED); + } + return b; +} + +static uint8_t swSpiInit(const uint8_t spiRate, const pin_t sck_pin, const pin_t mosi_pin) { + WRITE_PIN(mosi_pin, HIGH); + WRITE_PIN(sck_pin, LOW); + return spiRate; +} + +static void u8g_com_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) { + static uint8_t rs_last_state = 255; + if (rs != rs_last_state) { + // Transfer Data (FA) or Command (F8) + swSpiTransfer(rs ? 0x0FA : 0x0F8, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL); + rs_last_state = rs; + DELAY_US(40); // Give the controller time to process the data: 20 is bad, 30 is OK, 40 is safe + } + swSpiTransfer(val & 0x0F0, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL); + swSpiTransfer(val << 4, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL); +} +#ifdef __cplusplus + extern "C" { +#endif + +uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) { + switch (msg) { + case U8G_COM_MSG_INIT: + SCK_pin_ST7920_HAL = u8g->pin_list[U8G_PI_SCK]; + MOSI_pin_ST7920_HAL_HAL = u8g->pin_list[U8G_PI_MOSI]; + + u8g_SetPIOutput(u8g, U8G_PI_CS); + u8g_SetPIOutput(u8g, U8G_PI_SCK); + u8g_SetPIOutput(u8g, U8G_PI_MOSI); + u8g_Delay(5); + + SPI_speed = swSpiInit(SPI_SPEED, SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL); + + u8g_SetPILevel(u8g, U8G_PI_CS, 0); + u8g_SetPILevel(u8g, U8G_PI_SCK, 0); + u8g_SetPILevel(u8g, U8G_PI_MOSI, 0); + + u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: command mode */ + break; + + case U8G_COM_MSG_STOP: + break; + + case U8G_COM_MSG_RESET: + if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val); + break; + + case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */ + u8g->pin_list[U8G_PI_A0_STATE] = arg_val; + break; + + case U8G_COM_MSG_CHIP_SELECT: + if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select + break; + + case U8G_COM_MSG_WRITE_BYTE: + u8g_com_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val); + break; + + case U8G_COM_MSG_WRITE_SEQ: { + uint8_t *ptr = (uint8_t*) arg_ptr; + while (arg_val > 0) { + u8g_com_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++); + arg_val--; + } + } + break; + + case U8G_COM_MSG_WRITE_SEQ_P: { + uint8_t *ptr = (uint8_t*) arg_ptr; + while (arg_val > 0) { + u8g_com_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++); + arg_val--; + } + } + break; + } + return 1; +} +#ifdef __cplusplus + } +#endif + +#endif // U8GLIB_ST7920 +#endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_sw_spi.cpp b/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_sw_spi.cpp new file mode 100644 index 0000000000..8e0ac9c7df --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_sw_spi.cpp @@ -0,0 +1,215 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Based on u8g_com_std_sw_spi.c + * + * Universal 8bit Graphics Library + * + * Copyright (c) 2015, olikraus@gmail.com + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifdef __PLAT_NATIVE_SIM__ + +#include "../../../inc/MarlinConfig.h" + +#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920) + +#undef SPI_SPEED +#define SPI_SPEED 2 // About 2 MHz + +#include +#include + +#ifdef __cplusplus + extern "C" { +#endif + +uint8_t swSpiTransfer_mode_0(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) { + LOOP_L_N(i, 8) { + if (spi_speed == 0) { + WRITE_PIN(mosi_pin, !!(b & 0x80)); + WRITE_PIN(sck_pin, HIGH); + b <<= 1; + if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1; + WRITE_PIN(sck_pin, LOW); + } + else { + const uint8_t state = (b & 0x80) ? HIGH : LOW; + LOOP_L_N(j, spi_speed) + WRITE_PIN(mosi_pin, state); + + LOOP_L_N(j, spi_speed + (miso_pin >= 0 ? 0 : 1)) + WRITE_PIN(sck_pin, HIGH); + + b <<= 1; + if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1; + + LOOP_L_N(j, spi_speed) + WRITE_PIN(sck_pin, LOW); + } + } + + return b; +} + +uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) { + + LOOP_L_N(i, 8) { + const uint8_t state = (b & 0x80) ? HIGH : LOW; + if (spi_speed == 0) { + WRITE_PIN(sck_pin, LOW); + WRITE_PIN(mosi_pin, state); + WRITE_PIN(mosi_pin, state); // need some setup time + WRITE_PIN(sck_pin, HIGH); + } + else { + LOOP_L_N(j, spi_speed + (miso_pin >= 0 ? 0 : 1)) + WRITE_PIN(sck_pin, LOW); + + LOOP_L_N(j, spi_speed) + WRITE_PIN(mosi_pin, state); + + LOOP_L_N(j, spi_speed) + WRITE_PIN(sck_pin, HIGH); + } + b <<= 1; + if (miso_pin >= 0 && READ_PIN(miso_pin)) b |= 1; + } + + return b; +} + +static uint8_t SPI_speed = 0; + +static uint8_t swSpiInit(const uint8_t spi_speed, const uint8_t clk_pin, const uint8_t mosi_pin) { + return spi_speed; +} + +static void u8g_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) { + #if EITHER(FYSETC_MINI_12864, MKS_MINI_12864) + swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin); + #else + swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin); + #endif +} + +uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) { + switch (msg) { + case U8G_COM_MSG_INIT: + u8g_SetPIOutput(u8g, U8G_PI_SCK); + u8g_SetPIOutput(u8g, U8G_PI_MOSI); + u8g_SetPIOutput(u8g, U8G_PI_CS); + u8g_SetPIOutput(u8g, U8G_PI_A0); + if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput(u8g, U8G_PI_RESET); + SPI_speed = swSpiInit(SPI_SPEED, u8g->pin_list[U8G_PI_SCK], u8g->pin_list[U8G_PI_MOSI]); + u8g_SetPILevel(u8g, U8G_PI_SCK, 0); + u8g_SetPILevel(u8g, U8G_PI_MOSI, 0); + break; + + case U8G_COM_MSG_STOP: + break; + + case U8G_COM_MSG_RESET: + if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val); + break; + + case U8G_COM_MSG_CHIP_SELECT: + #if EITHER(FYSETC_MINI_12864, MKS_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0 + if (arg_val) { // SCK idle state needs to be set to the proper idle state before + // the next chip select goes active + u8g_SetPILevel(u8g, U8G_PI_SCK, 1); // Set SCK to mode 3 idle state before CS goes active + u8g_SetPILevel(u8g, U8G_PI_CS, LOW); + } + else { + u8g_SetPILevel(u8g, U8G_PI_CS, HIGH); + u8g_SetPILevel(u8g, U8G_PI_SCK, 0); // Set SCK to mode 0 idle state after CS goes inactive + } + #else + u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val); + #endif + break; + + case U8G_COM_MSG_WRITE_BYTE: + u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val); + break; + + case U8G_COM_MSG_WRITE_SEQ: { + uint8_t *ptr = (uint8_t *)arg_ptr; + while (arg_val > 0) { + u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++); + arg_val--; + } + } + break; + + case U8G_COM_MSG_WRITE_SEQ_P: { + uint8_t *ptr = (uint8_t *)arg_ptr; + while (arg_val > 0) { + u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr)); + ptr++; + arg_val--; + } + } + break; + + case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */ + u8g_SetPILevel(u8g, U8G_PI_A0, arg_val); + break; + } + return 1; +} + +#ifdef __cplusplus + } +#endif + +#elif !ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI, HAS_MARLINUI_HD44780) && HAS_MARLINUI_U8GLIB + #include + uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {return 0;} +#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920 +#endif // __PLAT_NATIVE_SIM__ diff --git a/Marlin/src/HAL/NATIVE_SIM/watchdog.h b/Marlin/src/HAL/NATIVE_SIM/watchdog.h new file mode 100644 index 0000000000..4e404c3887 --- /dev/null +++ b/Marlin/src/HAL/NATIVE_SIM/watchdog.h @@ -0,0 +1,27 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define WDT_TIMEOUT 4000000 // 4 second timeout + +void watchdog_init(); +void HAL_watchdog_refresh(); diff --git a/Marlin/src/HAL/platforms.h b/Marlin/src/HAL/platforms.h index e0617bdf7f..0b1b305f6d 100644 --- a/Marlin/src/HAL/platforms.h +++ b/Marlin/src/HAL/platforms.h @@ -43,6 +43,8 @@ #define HAL_PATH(PATH, NAME) XSTR(PATH/ESP32/NAME) #elif defined(__PLAT_LINUX__) #define HAL_PATH(PATH, NAME) XSTR(PATH/LINUX/NAME) +#elif defined(__PLAT_NATIVE_SIM__) + #define HAL_PATH(PATH, NAME) XSTR(PATH/NATIVE_SIM/NAME) #elif defined(__SAMD51__) #define HAL_PATH(PATH, NAME) XSTR(PATH/SAMD51/NAME) #else diff --git a/Marlin/src/HAL/shared/Delay.h b/Marlin/src/HAL/shared/Delay.h index 3174968c1b..04df35d88d 100644 --- a/Marlin/src/HAL/shared/Delay.h +++ b/Marlin/src/HAL/shared/Delay.h @@ -160,7 +160,7 @@ void calibrate_delay_loop(); // Delay in microseconds #define DELAY_US(x) DELAY_CYCLES((x) * ((F_CPU) / 1000000UL)) -#elif defined(__PLAT_LINUX__) || defined(ESP32) +#elif defined(ESP32) || defined(__PLAT_LINUX__) || defined(__PLAT_NATIVE_SIM__) // DELAY_CYCLES specified inside platform diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h index ba771596c7..7f96a30d6f 100644 --- a/Marlin/src/core/serial.h +++ b/Marlin/src/core/serial.h @@ -305,6 +305,9 @@ void serial_echopair_PGM(PGM_P const s_P, unsigned int v); void serial_echopair_PGM(PGM_P const s_P, unsigned long v); inline void serial_echopair_PGM(PGM_P const s_P, bool v) { serial_echopair_PGM(s_P, (int)v); } inline void serial_echopair_PGM(PGM_P const s_P, void *v) { serial_echopair_PGM(s_P, (uintptr_t)v); } +#if __INTPTR_WIDTH__ != __SIZE_WIDTH__ + inline void serial_echopair_PGM(PGM_P const s_P, size_t v) { serial_echopair_PGM(s_P, (long int)v); } +#endif void serial_echo_start(); void serial_error_start(); diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h index 98a8f0a98a..a30dd4ca17 100644 --- a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h +++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h @@ -97,6 +97,11 @@ #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_HAL_LPC1768_ST7920_hw_spi_fn #define U8G_COM_SSD_I2C_HAL u8g_com_HAL_LPC1768_ssd_hw_i2c_fn +#elif defined(__PLAT_NATIVE_SIM__) + uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); + uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); + #define U8G_COM_HAL_SW_SPI_FN u8g_com_sw_spi_fn + #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_ST7920_sw_spi_fn #endif #ifndef U8G_COM_HAL_SW_SPI_FN diff --git a/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp b/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp index 6b973241fe..5e1dfae5d1 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp @@ -360,7 +360,7 @@ void disp_gcode_icon(uint8_t file_num) { uint32_t lv_open_gcode_file(char *path) { #if ENABLED(SDSUPPORT) uint32_t *ps4; - uint32_t pre_sread_cnt = UINT32_MAX; + uintptr_t pre_sread_cnt = UINTPTR_MAX; char *cur_name; cur_name = strrchr(path, '/'); @@ -370,7 +370,7 @@ uint32_t lv_open_gcode_file(char *path) { ps4 = (uint32_t *)strstr((char *)public_buf, ";simage:"); // Ignore the beginning message of gcode file if (ps4) { - pre_sread_cnt = (uint32_t)ps4 - (uint32_t)((uint32_t *)(&public_buf[0])); + pre_sread_cnt = (uintptr_t)ps4 - (uintptr_t)((uint32_t *)(&public_buf[0])); card.setIndex(pre_sread_cnt); } return pre_sread_cnt; diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp index 1c1e5cc1f5..aae6e62a66 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp @@ -560,11 +560,11 @@ char *creat_title_text() { #if HAS_GCODE_PREVIEW - uint32_t gPicturePreviewStart = 0; + uintptr_t gPicturePreviewStart = 0; void preview_gcode_prehandle(char *path) { #if ENABLED(SDSUPPORT) - uint32_t pre_read_cnt = 0; + uintptr_t pre_read_cnt = 0; uint32_t *p1; char *cur_name; @@ -575,7 +575,7 @@ char *creat_title_text() { p1 = (uint32_t *)strstr((char *)public_buf, ";simage:"); if (p1) { - pre_read_cnt = (uint32_t)p1 - (uint32_t)((uint32_t *)(&public_buf[0])); + pre_read_cnt = (uintptr_t)p1 - (uintptr_t)((uint32_t *)(&public_buf[0])); To_pre_view = pre_read_cnt; gcode_preview_over = true; @@ -606,7 +606,7 @@ char *creat_title_text() { uint32_t br = card.read(public_buf, 400); uint32_t *p1 = (uint32_t *)strstr((char *)public_buf, ";gimage:"); if (p1) { - gPicturePreviewStart += (uint32_t)p1 - (uint32_t)((uint32_t *)(&public_buf[0])); + gPicturePreviewStart += (uintptr_t)p1 - (uintptr_t)((uint32_t *)(&public_buf[0])); break; } else { diff --git a/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp b/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp index 2127b23a15..cfd6db15fd 100644 --- a/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp +++ b/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp @@ -398,7 +398,7 @@ lv_fs_res_t sd_open_cb (lv_fs_drv_t * drv, void * file_p, const char * path, lv_ // find small image size card.read(public_buf, 512); public_buf[511] = '\0'; - char* eol = strpbrk((const char*)public_buf, "\n\r"); + const char* eol = strpbrk((const char*)public_buf, "\n\r"); small_image_size = (uintptr_t)eol - (uintptr_t)((uint32_t *)(&public_buf[0])) + 1; return LV_FS_RES_OK; } @@ -530,4 +530,10 @@ void lv_encoder_pin_init() { #endif // HAS_ENCODER_ACTION +#if __PLAT_NATIVE_SIM__ + #include + typedef void (*lv_log_print_g_cb_t)(lv_log_level_t level, const char *, uint32_t, const char *); + extern "C" void lv_log_register_print_cb(lv_log_print_g_cb_t print_cb) {} +#endif + #endif // HAS_TFT_LVGL_UI diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 3930279c94..a0f8c1648c 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -49,6 +49,10 @@ #define BOARD_INFO_NAME "RAMPS 1.4" #endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "SimRap 1.4" +#endif + #ifndef MARLIN_EEPROM_SIZE #define MARLIN_EEPROM_SIZE 0x1000 // 4KB #endif @@ -208,6 +212,7 @@ // #define SDSS 53 #define LED_PIN 13 +#define NEOPIXEL_PIN 71 #ifndef FILWIDTH_PIN #define FILWIDTH_PIN 5 // Analog Input on AUX2 @@ -215,7 +220,7 @@ // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 4 + #define FIL_RUNOUT_PIN 21 #endif #ifndef PS_ON_PIN @@ -389,7 +394,54 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_WIRED_LCD +#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI) + + #define TFT_A0_PIN 43 + #define TFT_CS_PIN 49 + #define TFT_DC_PIN 43 + #define TFT_SCK_PIN SD_SCK_PIN + #define TFT_MOSI_PIN SD_MOSI_PIN + #define TFT_MISO_PIN SD_MISO_PIN + #define LCD_USE_DMA_SPI + + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 + #define BEEPER_PIN 42 + + #define TOUCH_CS_PIN 33 + #define SD_DETECT_PIN 41 + + #define HAS_SPI_FLASH 1 + #if HAS_SPI_FLASH + #define SPI_DEVICE 1 + #define SPI_FLASH_SIZE 0x1000000 // 16MB + #define W25QXX_CS_PIN 31 + #define W25QXX_MOSI_PIN SD_MOSI_PIN + #define W25QXX_MISO_PIN SD_MISO_PIN + #define W25QXX_SCK_PIN SD_SCK_PIN + #endif + + #define TFT_BUFFER_SIZE 0xFFFF + #ifndef TFT_DRIVER + #define TFT_DRIVER ST7796 + #endif + #ifndef XPT2046_X_CALIBRATION + #define XPT2046_X_CALIBRATION 63934 + #endif + #ifndef XPT2046_Y_CALIBRATION + #define XPT2046_Y_CALIBRATION 63598 + #endif + #ifndef XPT2046_X_OFFSET + #define XPT2046_X_OFFSET -1 + #endif + #ifndef XPT2046_Y_OFFSET + #define XPT2046_Y_OFFSET -20 + #endif + + #define BTN_BACK 70 + +#elif HAS_WIRED_LCD // // LCD Display output pins @@ -622,14 +674,18 @@ #define BTN_EN1 37 #define BTN_EN2 35 #define BTN_ENC 31 + #define SD_DETECT_PIN 41 #endif #if ENABLED(G3D_PANEL) #define SD_DETECT_PIN 49 #define KILL_PIN 41 #endif - #endif + + // CUSTOM SIMULATOR INPUTS + #define BTN_BACK 70 + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index e6d6cbdaf5..b3e1605613 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -683,7 +683,7 @@ // #elif MB(LINUX_RAMPS) - #include "linux/pins_RAMPS_LINUX.h" // Linux env:linux_native + #include "linux/pins_RAMPS_LINUX.h" // Native or Simulation lin:linux_native mac:simulator_macos_debug mac:simulator_macos_release win:simulator_windows lin:simulator_linux_debug lin:simulator_linux_release #else diff --git a/Marlin/src/sd/SdFatUtil.cpp b/Marlin/src/sd/SdFatUtil.cpp index 7d9f33dc50..e6f7a9a013 100644 --- a/Marlin/src/sd/SdFatUtil.cpp +++ b/Marlin/src/sd/SdFatUtil.cpp @@ -48,7 +48,7 @@ return &top - reinterpret_cast(sbrk(0)); } -#else +#elif defined(__AVR__) extern char* __brkval; extern char __bss_end; diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp index 913ae5152b..61b2b72bb6 100644 --- a/Marlin/src/sd/cardreader.cpp +++ b/Marlin/src/sd/cardreader.cpp @@ -939,7 +939,7 @@ const char* CardReader::diveToFile(const bool update_cwd, SdFile* &inDirPtr, con while (atom_ptr) { // Find next subdirectory delimiter - char * const name_end = strchr(atom_ptr, '/'); + const char * const name_end = strchr(atom_ptr, '/'); // Last atom in the path? Item found. if (name_end <= atom_ptr) break; diff --git a/buildroot/share/PlatformIO/scripts/common-dependencies.py b/buildroot/share/PlatformIO/scripts/common-dependencies.py index 01ee89e25e..83dfeca879 100644 --- a/buildroot/share/PlatformIO/scripts/common-dependencies.py +++ b/buildroot/share/PlatformIO/scripts/common-dependencies.py @@ -215,7 +215,13 @@ def search_compiler(): # Find the current platform compiler by searching the $PATH # which will be in a platformio toolchain bin folder path_regex = re.escape(env['PROJECT_PACKAGES_DIR']) - gcc = "g++" + + # See if the environment provides a default compiler + try: + gcc = env.GetProjectOption('custom_deps_gcc') + except: + gcc = "g++" + if env['PLATFORM'] == 'win32': path_separator = ';' path_regex += r'.*\\bin' @@ -241,6 +247,8 @@ def search_compiler(): return filepath filepath = env.get('CXX') + if filepath == 'CC': + filepath = gcc blab("Couldn't find a compiler! Fallback to %s" % filepath) return filepath diff --git a/buildroot/share/PlatformIO/scripts/simulator.py b/buildroot/share/PlatformIO/scripts/simulator.py new file mode 100644 index 0000000000..fb9d93cceb --- /dev/null +++ b/buildroot/share/PlatformIO/scripts/simulator.py @@ -0,0 +1,52 @@ +# +# PlatformIO pre: script for simulator builds +# + +# Get the environment thus far for the build +Import("env") + +#print(env.Dump()) + +# +# Give the binary a distinctive name +# + +env['PROGNAME'] = "MarlinSimulator" + +# +# If Xcode is installed add the path to its Frameworks folder, +# or if Mesa is installed try to use its GL/gl.h. +# + +import sys +if sys.platform == 'darwin': + + # + # Silence half of the ranlib warnings. (No equivalent for 'ARFLAGS') + # + env['RANLIBFLAGS'] += [ "-no_warning_for_no_symbols" ] + + # Default paths for Xcode and a lucky GL/gl.h dropped by Mesa + xcode_path = "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/System/Library/Frameworks" + mesa_path = "/opt/local/include/GL/gl.h" + + import os.path + + if os.path.exists(xcode_path): + + env['BUILD_FLAGS'] += [ "-F" + xcode_path ] + print("Using OpenGL framework headers from Xcode.app") + + elif os.path.exists(mesa_path): + + env['BUILD_FLAGS'] += [ '-D__MESA__' ] + print("Using OpenGL header from", mesa_path) + + else: + + print("\n\nNo OpenGL headers found. Install Xcode for matching headers, or use 'sudo port install mesa' to get a GL/gl.h.\n\n") + + # Break out of the PIO build immediately + sys.exit(1) + +env.AddCustomTarget("upload", "$BUILD_DIR/${PROGNAME}", "$BUILD_DIR/${PROGNAME}") diff --git a/ini/native.ini b/ini/native.ini index dbdfd26f8b..b40ea836da 100644 --- a/ini/native.ini +++ b/ini/native.ini @@ -21,3 +21,110 @@ build_unflags = -Wall lib_ldf_mode = off lib_deps = src_filter = ${common.default_src_filter} + + +# +# Native Simulation +# Builds with a small subset of available features +# Required system libraries: SDL2, SDL2-net, OpenGL, GLM +# +# Tested with Linux (Mint 20) : gcc [9.3.0, 10.2.0]: libsdl2-dev[2.0.10], libsdl2-net-dev[2.0.1], libglm-dev[0.9.9.7, 0.9.9.8] +# +# Debugging with gdb in vscode is as easy as adding the launch task as usual, but platformio +# will randomly remove your task when it recreates its tasks from a template. Add your gdb +# launch task to '~/.platformio/penv/lib/python{PYTHON_VERSION}/site-packages/platformio/ide/tpls/vscode/.vscode' +# to avoid this until platformio updates. +# +[simulator_common] +platform = native +framework = +build_flags = ${common.build_flags} -std=gnu++17 -D__PLAT_NATIVE_SIM__ -DU8G_HAL_LINKS -I/usr/include/SDL2 -IMarlin -IMarlin/src/HAL/NATIVE_SIM/include -IMarlin/src/HAL/NATIVE_SIM/u8g +src_build_flags = -Wall -Wno-expansion-to-defined -Wcast-align +release_flags = -g0 -O3 -flto +debug_build_flags = -fstack-protector-strong -g -g3 -ggdb +lib_compat_mode = off +src_filter = ${common.default_src_filter} + + +lib_deps = ${common.lib_deps} + MarlinSimUI=https://github.com/p3p/MarlinSimUI.git + Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/marlin_sim_native.zip + LiquidCrystal=https://github.com/p3p/LiquidCrystal/archive/master.zip +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/simulator.py + + +[simulator_linux] +extends = simulator_common +build_flags = ${simulator_common.build_flags} -ldl -lpthread -lSDL2 -lSDL2_net -lGL + +[env:simulator_linux_debug] +platform = ${simulator_linux.platform} +extends = simulator_linux +build_type = debug + +[env:simulator_linux_release] +platform = ${simulator_linux.platform} +extends = simulator_linux +build_type = release +build_flags = ${simulator_linux.build_flags} ${simulator_linux.release_flags} + +# +# Simulator for macOS (MacPorts) +# +# sudo port install gcc10 gdb glm libsdl2 freetype +# sudo port install ld64 @3_3 +ld64_xcode +# sudo port uninstall ld64 ld64-latest +# cd /opt/local/bin +# sudo rm -f gcc g++ cc +# sudo ln gcc-mp-10 gcc ; sudo ln g++-mp-10 g++ ; sudo ln g++ cc +# cd - +# +# Use 'sudo port install mesa' to get a if no Xcode is installed. +# If Xcode is installed be sure to run `xcode-select --install` first. +# +# For VSCode debugging paste the block below near the top of launch.json. +# NOTE: The PlatformIO VSCode extension will remove it when regenerating launch.json. +# +# { "name": "Debug Sim", +# "type": "cppdbg", +# "request": "launch", +# "program": "${workspaceFolder}/.pio/build/simulator_macos/MarlinSimulator", +# "miDebuggerPath": "/opt/local/bin/ggdb", +# "MIMode": "gdb", +# "cwd": "${workspaceFolder}/.pio/build/simulator_macos" }, +# +[simulator_macos] +build_unflags = -lGL +custom_verbose = 0 +build_flags = + -I/opt/local/include + -I/opt/local/include/freetype2 + -I/opt/local/include/SDL2/ + -L/opt/local/lib + -Wl,-framework,OpenGl + -Wl,-framework,CoreFoundation + -lSDL2 + +[env:simulator_macos_debug] +platform = ${env:simulator_linux_release.platform} +extends = env:simulator_linux_debug +build_flags = ${env:simulator_linux_debug.build_flags} ${simulator_macos.build_flags} -ggdb -Og -D_THREAD_SAFE +build_unflags = ${simulator_macos.build_unflags} + +[env:simulator_macos_release] +platform = ${env:simulator_linux_release.platform} +extends = env:simulator_linux_release +build_flags = ${env:simulator_linux_release.build_flags} ${simulator_macos.build_flags} +build_unflags = ${simulator_macos.build_unflags} + +# +# Simulator for Windows 10 +# +# MSYS2 mingw-w64-x86_64 with these packages: +# pacman -S --needed base-devel mingw-w64-x86_64-toolchain mingw64/mingw-w64-x86_64-glm mingw64/mingw-w64-x86_64-SDL2 mingw64/mingw-w64-x86_64-SDL2_net +# +[env:simulator_windows] +platform = ${simulator_common.platform} +extends = simulator_common +src_build_flags = ${simulator_common.src_build_flags} -fpermissive +build_flags = ${simulator_common.build_flags} ${simulator_common.debug_build_flags} -fno-stack-protector -Wl,-subsystem,windows -ldl -lmingw32 -lSDL2main -lSDL2 -lSDL2_net -lopengl32 -lssp +build_type = debug