MKS Robin Lite/Lite2 Board Support (#14729)
thisiskeithb
5 years ago
committed by
Scott Lahteine
parent
7084f3647a
commit
d74efd9d46
@ -0,0 +1,143 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef __STM32F1__
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "MKS Robin Lite supports up to 1 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "MKS Robin Lite"
|
||||
#endif
|
||||
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks"
|
||||
|
||||
//#define DISABLE_DEBUG
|
||||
#define DISABLE_JTAG
|
||||
#define ENABLE_SPI2
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC13
|
||||
#define Y_STOP_PIN PC0
|
||||
#define Z_MIN_PIN PC12
|
||||
#define Z_MAX_PIN PB9
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PC6
|
||||
#define X_DIR_PIN PB12
|
||||
#define X_ENABLE_PIN PB10
|
||||
|
||||
#define Y_STEP_PIN PB11
|
||||
#define Y_DIR_PIN PB2
|
||||
#define Y_ENABLE_PIN PB10
|
||||
|
||||
#define Z_STEP_PIN PB1
|
||||
#define Z_DIR_PIN PC5
|
||||
#define Z_ENABLE_PIN PB10
|
||||
|
||||
#define E0_STEP_PIN PC4
|
||||
#define E0_DIR_PIN PA5
|
||||
#define E0_ENABLE_PIN PA4
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC9
|
||||
#define FAN_PIN PA8
|
||||
#define HEATER_BED_PIN PC8
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_BED_PIN PA1
|
||||
#define TEMP_0_PIN PA0
|
||||
|
||||
#define FIL_RUNOUT_PIN PB8 // MT_DET
|
||||
|
||||
//
|
||||
// LCD Pins
|
||||
//
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN PD2
|
||||
#define BTN_ENC PB3
|
||||
#define LCD_PINS_RS PC3
|
||||
|
||||
#define BTN_EN1 PB5
|
||||
#define BTN_EN2 PB4
|
||||
|
||||
#define LCD_PINS_ENABLE PC2
|
||||
|
||||
#if ENABLED(MKS_MINI_12864)
|
||||
|
||||
#define LCD_BACKLIGHT_PIN -1
|
||||
#define LCD_RESET_PIN -1
|
||||
#define DOGLCD_A0 PC1
|
||||
#define DOGLCD_CS PC2
|
||||
#define DOGLCD_SCK PB13
|
||||
#define DOGLCD_MOSI PB15
|
||||
|
||||
#else // !MKS_MINI_12864
|
||||
|
||||
#define LCD_PINS_D4 PC1
|
||||
#if ENABLED(ULTIPANEL)
|
||||
#define LCD_PINS_D5 -1
|
||||
#define LCD_PINS_D6 -1
|
||||
#define LCD_PINS_D7 -1
|
||||
#endif
|
||||
|
||||
#endif // !MKS_MINI_12864
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
|
||||
// Motor current PWM pins
|
||||
#define MOTOR_CURRENT_PWM_XY_PIN PB0
|
||||
#define MOTOR_CURRENT_PWM_Z_PIN PA7
|
||||
#define MOTOR_CURRENT_PWM_E_PIN PA6
|
||||
#define MOTOR_CURRENT_PWM_RANGE (65535/10/3.3) // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } // 1.05Amp per driver, here is XY, Z and E. This values determined empirically.
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define ENABLE_SPI2
|
||||
#define SD_DETECT_PIN PC10
|
||||
#define SCK_PIN PB13
|
||||
#define MISO_PIN P1B4
|
||||
#define MOSI_PIN P1B5
|
||||
#define SS_PIN PA15
|
||||
|
||||
#ifndef ST7920_DELAY_1
|
||||
#define ST7920_DELAY_1 DELAY_NS(125)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_2
|
||||
#define ST7920_DELAY_2 DELAY_NS(125)
|
||||
#endif
|
||||
#ifndef ST7920_DELAY_3
|
||||
#define ST7920_DELAY_3 DELAY_NS(125)
|
||||
#endif
|
||||
@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
|
||||
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
@ -0,0 +1,30 @@
|
||||
Import("env")
|
||||
|
||||
# Relocate firmware from 0x08000000 to 0x08005000
|
||||
for define in env['CPPDEFINES']:
|
||||
if define[0] == "VECT_TAB_ADDR":
|
||||
env['CPPDEFINES'].remove(define)
|
||||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08005000"))
|
||||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/mks_robin_lite.ld")
|
||||
|
||||
# Encrypt ${PROGNAME}.bin and save it as 'mksLite.bin'
|
||||
def encrypt(source, target, env):
|
||||
import os
|
||||
|
||||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E]
|
||||
|
||||
firmware = open(target[0].path, "rb")
|
||||
robin = open(target[0].dir.path +'/mksLite.bin', "wb")
|
||||
length = os.path.getsize(target[0].path)
|
||||
position = 0
|
||||
try:
|
||||
while position < length:
|
||||
byte = firmware.read(1)
|
||||
if position >= 320 and position < 31040:
|
||||
byte = chr(ord(byte) ^ key[position & 31])
|
||||
robin.write(byte)
|
||||
position += 1
|
||||
finally:
|
||||
firmware.close()
|
||||
robin.close()
|
||||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
|
||||
Loading…
Reference in New Issue