Update links, README, contributing, etc.

4 years ago · d1e20eb29f
parent 715271190c
commit d1e20eb29f
83 changed files with 132 additions and 131 deletions
--- a/.github/FUNDING.yml
+++ b/.github/FUNDING.yml
@ -1,3 +1,3 @@
 github: [thinkyhead]
 patreon: thinkyhead
-custom: ["http://www.thinkyhead.com/donate-to-marlin"]
+custom: ["https://www.thinkyhead.com/donate-to-marlin"]
--- a/.github/contributing.md
+++ b/.github/contributing.md
@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of

 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.

-* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
+* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
 * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)

-If chat is more your speed, you can join the MarlinFirmware Slack team:
+If chat is more your speed, you can join the MarlinFirmware Discord server:

-* Join the Marlin Slack Team
-  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
-  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond &mdash; please be patient!
-  * Use the `#general` channel for general questions or discussion about Marlin.
-  * Other channels exist for certain topics. Check the channel list.
+* Use the link https://discord.gg/n5NJ59y to join up as a General User.
+* Even though our Discord is pretty active, it may take a while for community members to respond &mdash; please be patient!
+* Use the `#general` channel for general questions or discussion about Marlin.
+* Other channels exist for certain topics or are limited to Patrons. Check the channel list.

 ## How Can I Contribute?

--- a/.github/issue_template.md
+++ b/.github/issue_template.md
@ -2,9 +2,13 @@

 Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md

-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead use one of the following options:

-Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
+- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
+- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
+- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
+
+Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.

 -->

--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -473,7 +473,7 @@
 //===========================================================================
 //============================= PID Settings ================================
 //===========================================================================
-// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
+// PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning

 // Comment the following line to disable PID and enable bang-bang.
 #define PIDTEMP
--- a/Marlin/Marlin.ino
+++ b/Marlin/Marlin.ino
@ -37,7 +37,7 @@ Configuration

 Getting Help

-  - http://forums.reprap.org/list.php?415
+  - https://reprap.org/forum/list.php?415
    The Marlin Discussion Forum is a great place to get help from other Marlin
    users who may have experienced similar issues to your own.

--- a/Marlin/src/HAL/AVR/fastio.h
+++ b/Marlin/src/HAL/AVR/fastio.h
@ -57,7 +57,7 @@
 *
 * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
 *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
 */

 #define _READ(IO)             TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
--- a/Marlin/src/HAL/DUE/Tone.cpp
+++ b/Marlin/src/HAL/DUE/Tone.cpp
@ -24,7 +24,7 @@

 /**
 * Description: Tone function for Arduino Due and compatible (SAM3X8E)
- * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/fastio.h
+++ b/Marlin/src/HAL/DUE/fastio.h
@ -58,7 +58,7 @@
 *
 * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
 *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
 */

 // Read a pin
--- a/Marlin/src/HAL/DUE/usb/arduino_due_x.h
+++ b/Marlin/src/HAL/DUE/usb/arduino_due_x.h
@ -43,7 +43,7 @@
 #pragma once

 /**
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 /**
--- a/Marlin/src/HAL/DUE/usb/compiler.h
+++ b/Marlin/src/HAL/DUE/usb/compiler.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef UTILS_COMPILER_H
--- a/Marlin/src/HAL/DUE/usb/conf_access.h
+++ b/Marlin/src/HAL/DUE/usb/conf_access.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _CONF_ACCESS_H_
--- a/Marlin/src/HAL/DUE/usb/conf_clock.h
+++ b/Marlin/src/HAL/DUE/usb/conf_clock.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef CONF_CLOCK_H_INCLUDED
--- a/Marlin/src/HAL/DUE/usb/conf_usb.h
+++ b/Marlin/src/HAL/DUE/usb/conf_usb.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _CONF_USB_H_
--- a/Marlin/src/HAL/DUE/usb/ctrl_access.c
+++ b/Marlin/src/HAL/DUE/usb/ctrl_access.c
@ -53,7 +53,7 @@
 *
 ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/ctrl_access.h
+++ b/Marlin/src/HAL/DUE/usb/ctrl_access.h
@ -53,7 +53,7 @@
 *
 ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */


--- a/Marlin/src/HAL/DUE/usb/genclk.h
+++ b/Marlin/src/HAL/DUE/usb/genclk.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef CHIP_GENCLK_H_INCLUDED
--- a/Marlin/src/HAL/DUE/usb/mrepeat.h
+++ b/Marlin/src/HAL/DUE/usb/mrepeat.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _MREPEAT_H_
--- a/Marlin/src/HAL/DUE/usb/osc.h
+++ b/Marlin/src/HAL/DUE/usb/osc.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef CHIP_OSC_H_INCLUDED
--- a/Marlin/src/HAL/DUE/usb/pll.h
+++ b/Marlin/src/HAL/DUE/usb/pll.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef CHIP_PLL_H_INCLUDED
--- a/Marlin/src/HAL/DUE/usb/preprocessor.h
+++ b/Marlin/src/HAL/DUE/usb/preprocessor.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _PREPROCESSOR_H_
--- a/Marlin/src/HAL/DUE/usb/sbc_protocol.h
+++ b/Marlin/src/HAL/DUE/usb/sbc_protocol.h
@ -52,7 +52,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */
 #ifndef _SBC_PROTOCOL_H_
 #define _SBC_PROTOCOL_H_
--- a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h
+++ b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h
@ -42,7 +42,7 @@
 *
 ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */


--- a/Marlin/src/HAL/DUE/usb/spc_protocol.h
+++ b/Marlin/src/HAL/DUE/usb/spc_protocol.h
@ -45,7 +45,7 @@
 */

 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */
 #ifndef _SPC_PROTOCOL_H_
 #define _SPC_PROTOCOL_H_
--- a/Marlin/src/HAL/DUE/usb/stringz.h
+++ b/Marlin/src/HAL/DUE/usb/stringz.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _STRINGZ_H_
--- a/Marlin/src/HAL/DUE/usb/sysclk.c
+++ b/Marlin/src/HAL/DUE/usb/sysclk.c
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/sysclk.h
+++ b/Marlin/src/HAL/DUE/usb/sysclk.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef CHIP_SYSCLK_H_INCLUDED
--- a/Marlin/src/HAL/DUE/usb/tpaste.h
+++ b/Marlin/src/HAL/DUE/usb/tpaste.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _TPASTE_H_
--- a/Marlin/src/HAL/DUE/usb/udc.c
+++ b/Marlin/src/HAL/DUE/usb/udc.c
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/udc.h
+++ b/Marlin/src/HAL/DUE/usb/udc.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _UDC_H_
--- a/Marlin/src/HAL/DUE/usb/udc_desc.h
+++ b/Marlin/src/HAL/DUE/usb/udc_desc.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _UDC_DESC_H_
--- a/Marlin/src/HAL/DUE/usb/udd.h
+++ b/Marlin/src/HAL/DUE/usb/udd.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _UDD_H_
--- a/Marlin/src/HAL/DUE/usb/udi.h
+++ b/Marlin/src/HAL/DUE/usb/udi.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _UDI_H_
--- a/Marlin/src/HAL/DUE/usb/udi_cdc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc.c
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/udi_cdc.h
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _UDI_CDC_H_
@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
 * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
 *
 * Also, you can refer to application note
- * <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
+ * <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
 * AVR4902 ASF - USB Composite Device</A>.
 *
 * \section udi_cdc_use_case_composite_setup Setup steps
--- a/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _UDI_CDC_CONF_H_
--- a/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/udi_composite_desc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_composite_desc.c
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/udi_msc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_msc.c
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/udi_msc.h
+++ b/Marlin/src/HAL/DUE/usb/udi_msc.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _UDI_MSC_H_
@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
 * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
 *
 * Also, you can refer to application note
- * <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
+ * <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
 * AVR4902 ASF - USB Composite Device</A>.
 *
 * \section udi_msc_use_case_composite_setup Setup steps
--- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.c
+++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.c
@ -42,7 +42,7 @@
 */

 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifdef ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.h
+++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef UOTGHS_DEVICE_DUE_H_INCLUDED
--- a/Marlin/src/HAL/DUE/usb/uotghs_otg.h
+++ b/Marlin/src/HAL/DUE/usb/uotghs_otg.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef UOTGHS_OTG_H_INCLUDED
--- a/Marlin/src/HAL/DUE/usb/usb_protocol.h
+++ b/Marlin/src/HAL/DUE/usb/usb_protocol.h
@ -44,7 +44,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _USB_PROTOCOL_H_
--- a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h
+++ b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */
 #ifndef _USB_PROTOCOL_CDC_H_
 #define _USB_PROTOCOL_CDC_H_
--- a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
+++ b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _USB_PROTOCOL_MSC_H_
--- a/Marlin/src/HAL/DUE/usb/usb_task.c
+++ b/Marlin/src/HAL/DUE/usb/usb_task.c
@ -41,7 +41,7 @@
 *
 */

-// Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+// Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>

 #ifdef ARDUINO_ARCH_SAM

--- a/Marlin/src/HAL/DUE/usb/usb_task.h
+++ b/Marlin/src/HAL/DUE/usb/usb_task.h
@ -41,7 +41,7 @@
 *
 */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

 #ifndef _USB_TASK_H_
--- a/Marlin/src/HAL/LINUX/fastio.h
+++ b/Marlin/src/HAL/LINUX/fastio.h
@ -44,7 +44,7 @@
 *
 * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
 *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
 */

 /// Read a pin
--- a/Marlin/src/HAL/LPC1768/fastio.h
+++ b/Marlin/src/HAL/LPC1768/fastio.h
@ -56,7 +56,7 @@
 *
 * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
 *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
 */

 /// Read a pin
--- a/Marlin/src/HAL/STM32F1/SPI.cpp
+++ b/Marlin/src/HAL/STM32F1/SPI.cpp
@ -216,7 +216,7 @@ void SPIClass::setDataMode(uint8_t dataMode) {
  /**
   * Notes:
   * As far as we know the AVR numbers for dataMode match the numbers required by the STM32.
-   * From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4
+   * From the AVR doc https://www.atmel.com/images/doc2585.pdf section 2.4
   *
   * SPI Mode  CPOL  CPHA  Shift SCK-edge  Capture SCK-edge
   * 0       0     0     Falling     Rising
--- a/Marlin/src/HAL/TEENSY31_32/fastio.h
+++ b/Marlin/src/HAL/TEENSY31_32/fastio.h
@ -39,7 +39,7 @@
 *
 * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
 *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
 */

 #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)
--- a/Marlin/src/HAL/TEENSY35_36/fastio.h
+++ b/Marlin/src/HAL/TEENSY35_36/fastio.h
@ -39,7 +39,7 @@
 *
 * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
 *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
 */

 #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)
--- a/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp
+++ b/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp
@ -4,7 +4,7 @@
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ * file, You can obtain one at https://mozilla.org/MPL/2.0/.
 *
 * This library was modified, some bugs fixed, stack address validated
 * and adapted to be used in Marlin 3D printer firmware as backtracer
--- a/Marlin/src/feature/dac/dac_mcp4728.cpp
+++ b/Marlin/src/feature/dac/dac_mcp4728.cpp
@ -24,7 +24,7 @@
 * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
 *
 * For implementation details, please take a look at the datasheet:
- * http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
+ * https://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
 *
 * For discussion and feedback, please go to:
 * https://arduino.cc/forum/index.php/topic,51842.0.html
--- a/Marlin/src/gcode/motion/G5.cpp
+++ b/Marlin/src/gcode/motion/G5.cpp
@ -29,7 +29,7 @@

 /**
 * Parameters interpreted according to:
- * http://linuxcnc.org/docs/2.6/html/gcode/parser.html#sec:G5-Cubic-Spline
+ * https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline
 * However I, J omission is not supported at this point; all
 * parameters can be omitted and default to zero.
 */
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
@ -113,9 +113,9 @@

 /**
 * Settings for the 4D Systems,        4.3" Embedded SPI Display             480x272, SPI, FT800 (4DLCD-FT843)
- *  http://www.4dsystems.com.au/product/4DLCD_FT843/
+ *  https://4dsystems.com.au/4dlcd-ft843
 * Datasheet:
- *  http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf
+ *  https://4dsystems.com.au/mwdownloads/download/link/id/52/
 */
 #elif defined(LCD_4DSYSTEMS_4DLCD_FT843)
  #if !HAS_RESOLUTION
@ -136,9 +136,7 @@

 /**
 * Settings for the Aleph Objects Color LCD User Interface
- *  https://code.alephobjects.com/source/aotctl/
- * Datasheet:
- *  http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
+ * Datasheet https://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
 */
 #elif defined(LCD_ALEPHOBJECTS_CLCD_UI)
  #if !HAS_RESOLUTION
--- a/Marlin/src/module/scara.cpp
+++ b/Marlin/src/module/scara.cpp
@ -100,7 +100,7 @@ void inverse_kinematics(const xyz_pos_t &raw) {
    /**
     * Morgan SCARA Inverse Kinematics. Results in 'delta'.
     *
-     * See http://forums.reprap.org/read.php?185,283327
+     * See https://reprap.org/forum/read.php?185,283327
     *
     * Maths and first version by QHARLEY.
     * Integrated into Marlin and slightly restructured by Joachim Cerny.
--- a/Marlin/src/module/thermistor/thermistor_2.h
+++ b/Marlin/src/module/thermistor/thermistor_2.h
@ -23,7 +23,7 @@

 //
 // R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 //
 const temp_entry_t temptable_2[] PROGMEM = {
--- a/Marlin/src/module/thermistor/thermistor_5.h
+++ b/Marlin/src/module/thermistor/thermistor_5.h
@ -24,7 +24,7 @@
 // R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
 // 100k ParCan thermistor (104GT-2)
 // ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan)
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 const temp_entry_t temptable_5[] PROGMEM = {
  { OV(   1), 713 },
--- a/Marlin/src/module/thermistor/thermistor_52.h
+++ b/Marlin/src/module/thermistor/thermistor_52.h
@ -23,7 +23,7 @@

 // R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
 // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 // Advantage: More resolution and better linearity from 150C to 200C
 const temp_entry_t temptable_52[] PROGMEM = {
--- a/Marlin/src/module/thermistor/thermistor_55.h
+++ b/Marlin/src/module/thermistor/thermistor_55.h
@ -23,7 +23,7 @@

 // R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
 // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 // Advantage: More resolution and better linearity from 150C to 200C
 const temp_entry_t temptable_55[] PROGMEM = {
--- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
+++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
@ -23,7 +23,7 @@

 /**
 * Alligator Board R2
- * http://www.3dartists.org/
+ * https://reprap.org/wiki/Alligator_Board
 */

 #ifndef __SAM3X8E__
--- a/Marlin/src/pins/sanguino/pins_OMCA.h
+++ b/Marlin/src/pins/sanguino/pins_OMCA.h
@ -49,7 +49,7 @@
 *       PWM (D 14) PD6 20|        |21  PD7 (D 15) PWM
 *                        +--------+
 *
- * REF http://sanguino.cc/hardware
+ * REF http://sanguino.wikidot.com/hardware
 */

 /**
@ -70,7 +70,7 @@
 *
 * When installing select 1.0.2
 *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Installation instructions can be found at http://learn.sparkfun.com/pages/CustomBoardsArduino
 * Just use the above JSON URL instead of Sparkfun's JSON.
 *
 * Once installed select the Sanguino board and then select the CPU.
--- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
+++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
@ -23,7 +23,7 @@

 /**
 * STM32F407VET6 with RAMPS-like shield
- * 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
+ * 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485
 * Shield - https://github.com/jmz52/Hardware
 */

--- a/Marlin/src/sd/SdFatStructs.h
+++ b/Marlin/src/sd/SdFatStructs.h
@ -39,7 +39,7 @@

 /**
 * mostly from Microsoft document fatgen103.doc
- * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
+ * https://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
 */

 uint8_t const BOOTSIG0 = 0x55,          // Value for byte 510 of boot block or MBR
--- a/Marlin/src/sd/SdInfo.h
+++ b/Marlin/src/sd/SdInfo.h
@ -39,7 +39,7 @@
 // Version 3.01
 // May 18, 2010
 //
-// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
+// https://www.sdcard.org/downloads/pls/index.html

 // SD card commands
 uint8_t const CMD0 = 0x00,    // GO_IDLE_STATE - init card in spi mode if CS low
--- a/README.md
+++ b/README.md
@ -52,8 +52,8 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level

  boards|processor|speed|flash|sram|logic|fpu
  ----|---------|-----|-----|----|-----|---
-  [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
-  [MKS SBASE](http://forums.reprap.org/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
+  [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](https://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
+  [MKS SBASE](https://reprap.org/forum/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
  [Selena Compact](https://github.com/Ales2-k/Selena)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
  [Azteeg X5 GT](https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm)|LPC1769 ARM-Cortex M3|120MHz|512k|32+16+16k|3.3-5V|no
  [Smoothieboard](https://reprap.org/wiki/Smoothieboard)|LPC1769 ARM-Cortex M3|120MHz|512k|64k|3.3-5V|no
@ -75,7 +75,7 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level

  boards|processor|speed|flash|sram|logic|fpu
  ----|---------|-----|-----|----|-----|---
-  [STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](http://www.st.com/en/microcontrollers/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes
+  [STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](https://www.st.com/en/microcontrollers-microprocessors/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes

  #### Teensy++ 2.0

@ -110,12 +110,12 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.

 The current Marlin dev team consists of:

- - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA &nbsp; [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [![Flattr Scott](http://api.flattr.com/button/flattr-badge-small.png)](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
+ - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA &nbsp; [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [![Flattr Scott](https://api.flattr.com/button/flattr-badge-small.png)](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
 - Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA
 - Chris Pepper [[@p3p](https://github.com/p3p)] - UK
 - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
 - João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal
- - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
+ - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)

 ## License

--- a/buildroot/etc/udev/rules.d/99-platformio-udev.rules
+++ b/buildroot/etc/udev/rules.d/99-platformio-udev.rules
@ -4,7 +4,7 @@
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
-#    http://www.apache.org/licenses/LICENSE-2.0
+#    https://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
@ -16,7 +16,7 @@
 #
 # INSTALLATION
 #
-# Please visit > http://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
+# Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
 #
 #####################################################################################

--- a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json
+++ b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json
@ -41,6 +41,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407vg.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407vg.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json
+++ b/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json
@ -41,6 +41,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json
+++ b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json
@ -41,6 +41,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/PlatformIO/boards/CHITU_F103.json
+++ b/buildroot/share/PlatformIO/boards/CHITU_F103.json
@ -43,6 +43,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/en/microcontrollers/stm32f103ze.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f103ze.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/PlatformIO/boards/FLYF407ZG.json
+++ b/buildroot/share/PlatformIO/boards/FLYF407ZG.json
@ -59,6 +59,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/PlatformIO/boards/LERDGE.json
+++ b/buildroot/share/PlatformIO/boards/LERDGE.json
@ -59,6 +59,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json
+++ b/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json
@ -59,6 +59,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407ve.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/PlatformIO/boards/malyanM200.json
+++ b/buildroot/share/PlatformIO/boards/malyanM200.json
@ -30,6 +30,6 @@
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
-  "url": "http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
+  "url": "https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
  "vendor": "Generic"
 }
--- a/buildroot/share/fonts/README.md
+++ b/buildroot/share/fonts/README.md
@ -5,7 +5,7 @@
 The original author of the following font files is [A. Hardtung](https://github.com/AnHardt).

 Any copyright is dedicated to the Public Domain.
-http://creativecommons.org/publicdomain/zero/1.0/
+https://creativecommons.org/publicdomain/zero/1.0/

 - HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
 - HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
@ -20,4 +20,4 @@ Additional changes to the original font files distributed with Marlin are copyri


 ## Documentation
-For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.
+For detailed information about [adding new fonts](https://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.
--- a/buildroot/share/fonts/uxggenpages.md
+++ b/buildroot/share/fonts/uxggenpages.md
@ -99,11 +99,11 @@ At this time, the font file `marlin-6x12-3.bdf` is used to generate the font dat

 - [WQY](http://wenq.org/)
 - [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz)
- [unifont (16x8 or 16x16)](http://unifoundry.com/unifont.html)
+- [unifont (16x8 or 16x16)](https://unifoundry.com/unifont.html)

 Documents related to the old version of the language engine:

- [Marlin Fonts Documentation](http://www.marlinfw.org/docs/development/fonts.html)
+- [Marlin Fonts Documentation](https://www.marlinfw.org/docs/development/fonts.html)
 - [Marlin LCD Language](https://marlinfw.org/docs/development/lcd_language.html)
 - [U8GLIB](https://github.com/olikraus/u8glib.git)
 - [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git)
--- a/buildroot/share/scripts/createTemperatureLookupMarlin.py
+++ b/buildroot/share/scripts/createTemperatureLookupMarlin.py
@ -2,10 +2,10 @@
 """Thermistor Value Lookup Table Generator

 Generates lookup to temperature values for use in a microcontroller in C format based on:
-http://en.wikipedia.org/wiki/Steinhart-Hart_equation
+https://en.wikipedia.org/wiki/Steinhart-Hart_equation

 The main use is for Arduino programs that read data from the circuit board described here:
-http://reprap.org/wiki/Temperature_Sensor_v2.0
+https://reprap.org/wiki/Temperature_Sensor_v2.0

 Usage: python createTemperatureLookupMarlin.py [options]

--- a/buildroot/share/vscode/avrdude.conf
+++ b/buildroot/share/vscode/avrdude.conf
@ -147,7 +147,7 @@
 #     This flag was added to work around a problem with the
 #     at90s4433/2333's; see the at90s4433 errata at:
 #
-#         http://www.atmel.com/atmel/acrobat/doc1280.pdf
+#         https://www.atmel.com/atmel/acrobat/doc1280.pdf
 #
 # INSTRUCTION FORMATS
 #
@ -184,7 +184,7 @@
 # section avr061.zip which accompanies the application note
 # AVR061 available from:
 #
-#      http://www.atmel.com/atmel/acrobat/doc2525.pdf
+#      https://www.atmel.com/atmel/acrobat/doc2525.pdf
 #

 #define ATTINY10    0x10  /* the _old_ one that never existed! */
@ -416,13 +416,13 @@ programmer

 programmer
  id    = "usbasp";
-  desc  = "USBasp, http://www.fischl.de/usbasp/";
+  desc  = "USBasp, https://www.fischl.de/usbasp/";
  type  = usbasp;
 ;

 programmer
  id    = "usbtiny";
-  desc  = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
+  desc  = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
  type  = usbtiny;
 ;

@ -596,7 +596,7 @@ programmer

 programmer
  id    = "bsd";
-  desc  = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
+  desc  = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/";
  type  = par;
  vcc   = 2, 3, 4, 5;
  reset = 7;
@ -655,7 +655,7 @@ programmer

 programmer
  id     = "alf";
-  desc   = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
+  desc   = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/";
  type   = par;
  vcc    = 2, 3, 4, 5;
  buff   = 6;
@ -682,7 +682,7 @@ programmer

 programmer
  id     = "picoweb";
-  desc   = "Picoweb Programming Cable, http://www.picoweb.net/";
+  desc   = "Picoweb Programming Cable, https://www.picoweb.net/";
  type   = par;
  reset  = 2;
  sck    = 3;
@ -743,7 +743,7 @@ programmer

 programmer
  id    = "atisp";
-  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
+  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <https://micro-research.co.th/> micro-research.co.th";
  type  = par;
  reset = ~6;
  sck   = ~8;
@ -753,7 +753,7 @@ programmer

 programmer
  id    = "ere-isp-avr";
-  desc  = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
+  desc  = "ERE ISP-AVR <https://www.ere.co.th/download/sch050713.pdf>";
  type  = par;
  reset = ~4;
  sck   = 3;
@ -773,7 +773,7 @@ programmer
 ;

 # It is almost same as pony-stk200, except vcc on pin 5 to auto
-# disconnect port (download on http://electropol.free.fr)
+# disconnect port (download on https://electropol.free.fr)
 programmer
  id    = "frank-stk200";
  desc  = "Frank STK200";
@ -787,7 +787,7 @@ programmer
 ;

 # The AT98ISP Cable is a simple parallel dongle for AT89 family.
-# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
+# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
 programmer
 id = "89isp";
 desc = "Atmel at89isp cable";
@ -836,7 +836,7 @@ programmer

 programmer
  id    = "siprog";
-  desc  = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
+  desc  = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
  type  = serbb;
  reset = ~3;
  sck   = 7;
--- a/buildroot/share/vscode/avrdude_linux.conf
+++ b/buildroot/share/vscode/avrdude_linux.conf
@ -147,7 +147,7 @@
 #     This flag was added to work around a problem with the
 #     at90s4433/2333's; see the at90s4433 errata at:
 #
-#         http://www.atmel.com/atmel/acrobat/doc1280.pdf
+#         https://www.atmel.com/atmel/acrobat/doc1280.pdf
 #
 # INSTRUCTION FORMATS
 #
@ -184,7 +184,7 @@
 # section avr061.zip which accompanies the application note
 # AVR061 available from:
 #
-#      http://www.atmel.com/atmel/acrobat/doc2525.pdf
+#      https://www.atmel.com/atmel/acrobat/doc2525.pdf
 #

 #define ATTINY10    0x10  /* the _old_ one that never existed! */
@ -416,13 +416,13 @@ programmer

 programmer
  id    = "usbasp";
-  desc  = "USBasp, http://www.fischl.de/usbasp/";
+  desc  = "USBasp, https://www.fischl.de/usbasp/";
  type  = usbasp;
 ;

 programmer
  id    = "usbtiny";
-  desc  = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
+  desc  = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
  type  = usbtiny;
 ;

@ -596,7 +596,7 @@ programmer

 programmer
  id    = "bsd";
-  desc  = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
+  desc  = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/";
  type  = par;
  vcc   = 2, 3, 4, 5;
  reset = 7;
@ -655,7 +655,7 @@ programmer

 programmer
  id     = "alf";
-  desc   = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
+  desc   = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/";
  type   = par;
  vcc    = 2, 3, 4, 5;
  buff   = 6;
@ -682,7 +682,7 @@ programmer

 programmer
  id     = "picoweb";
-  desc   = "Picoweb Programming Cable, http://www.picoweb.net/";
+  desc   = "Picoweb Programming Cable, https://www.picoweb.net/";
  type   = par;
  reset  = 2;
  sck    = 3;
@ -743,7 +743,7 @@ programmer

 programmer
  id    = "atisp";
-  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
+  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <https://micro-research.co.th/> micro-research.co.th";
  type  = par;
  reset = ~6;
  sck   = ~8;
@ -753,7 +753,7 @@ programmer

 programmer
  id    = "ere-isp-avr";
-  desc  = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
+  desc  = "ERE ISP-AVR <https://www.ere.co.th/download/sch050713.pdf>";
  type  = par;
  reset = ~4;
  sck   = 3;
@ -773,7 +773,7 @@ programmer
 ;

 # It is almost same as pony-stk200, except vcc on pin 5 to auto
-# disconnect port (download on http://electropol.free.fr)
+# disconnect port (download on https://electropol.free.fr)
 programmer
  id    = "frank-stk200";
  desc  = "Frank STK200";
@ -787,7 +787,7 @@ programmer
 ;

 # The AT98ISP Cable is a simple parallel dongle for AT89 family.
-# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
+# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
 programmer
 id = "89isp";
 desc = "Atmel at89isp cable";
@ -836,7 +836,7 @@ programmer

 programmer
  id    = "siprog";
-  desc  = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
+  desc  = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
  type  = serbb;
  reset = ~3;
  sck   = 7;
--- a/buildroot/share/vscode/avrdude_macOS.conf
+++ b/buildroot/share/vscode/avrdude_macOS.conf
@ -147,7 +147,7 @@
 #     This flag was added to work around a problem with the
 #     at90s4433/2333's; see the at90s4433 errata at:
 #
-#         http://www.atmel.com/atmel/acrobat/doc1280.pdf
+#         https://www.atmel.com/atmel/acrobat/doc1280.pdf
 #
 # INSTRUCTION FORMATS
 #
@ -184,7 +184,7 @@
 # section avr061.zip which accompanies the application note
 # AVR061 available from:
 #
-#      http://www.atmel.com/atmel/acrobat/doc2525.pdf
+#      https://www.atmel.com/atmel/acrobat/doc2525.pdf
 #

 #define ATTINY10    0x10  /* the _old_ one that never existed! */
@ -416,13 +416,13 @@ programmer

 programmer
  id    = "usbasp";
-  desc  = "USBasp, http://www.fischl.de/usbasp/";
+  desc  = "USBasp, https://www.fischl.de/usbasp/";
  type  = usbasp;
 ;

 programmer
  id    = "usbtiny";
-  desc  = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
+  desc  = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
  type  = usbtiny;
 ;

@ -630,7 +630,7 @@ programmer

 programmer
  id    = "siprog";
-  desc  = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
+  desc  = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
  type  = serbb;
  reset = ~3;
  sck   = 7;
--- a/platformio.ini
+++ b/platformio.ini
@ -769,7 +769,7 @@ upload_command    = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"

 #
 # STM32F407VET6 with RAMPS-like shield
-# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
+# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
 # Shield - https://github.com/jmz52/Hardware
 #
 [env:STM32F407VE_black]