pinsDebug with more features, uses less RAM
I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins2.0.x
Scott Lahteine
8 years ago
committed by
Bob-the-Kuhn
parent
7dfe2cc132
commit
c9e35004e7
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,775 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
// Please update this list when adding new pins to Marlin.
|
||||
// The order doesn't matter.
|
||||
// Following this pattern is a must.
|
||||
// If the new pin name is over 28 characters long then pinsDebug.h will need to be modified.
|
||||
|
||||
// Pin list updated from 18 FEB 2017 RCBugfix branch - max length of pin name is 24
|
||||
#if defined(__FD) && __FD >= 0
|
||||
REPORT_NAME_DIGITAL(__FD, __LINE__ )
|
||||
#endif
|
||||
#if defined(__FS) && __FS >= 0
|
||||
REPORT_NAME_DIGITAL(__FS, __LINE__ )
|
||||
#endif
|
||||
#if defined(__GD) && __GD >= 0
|
||||
REPORT_NAME_DIGITAL(__GD, __LINE__ )
|
||||
#endif
|
||||
#if defined(__GS) && __GS >= 0
|
||||
REPORT_NAME_DIGITAL(__GS, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(AVR_MISO)
|
||||
REPORT_NAME_DIGITAL(AVR_MISO_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(AVR_MOSI)
|
||||
REPORT_NAME_DIGITAL(AVR_MOSI_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(AVR_SCK)
|
||||
REPORT_NAME_DIGITAL(AVR_SCK_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(AVR_SS)
|
||||
REPORT_NAME_DIGITAL(AVR_SS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(BEEPER)
|
||||
REPORT_NAME_DIGITAL(BEEPER_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_CENTER) && BTN_CENTER >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_CENTER, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_DOWN) && BTN_DOWN >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_DOWN, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_DWN) && BTN_DWN >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_DWN, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_EN1) && BTN_EN1 >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_EN1, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_EN2) && BTN_EN2 >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_EN2, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_ENC) && BTN_ENC >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_ENC, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_HOME) && BTN_HOME >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_HOME, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_LEFT) && BTN_LEFT >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_LEFT, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_LFT) && BTN_LFT >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_LFT, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_RIGHT) && BTN_RIGHT >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_RIGHT, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_RT) && BTN_RT >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_RT, __LINE__ )
|
||||
#endif
|
||||
#if defined(BTN_UP) && BTN_UP >= 0
|
||||
REPORT_NAME_DIGITAL(BTN_UP, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(CASE_LIGHT)
|
||||
REPORT_NAME_DIGITAL(CASE_LIGHT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(CONTROLLERFAN)
|
||||
REPORT_NAME_DIGITAL(CONTROLLERFAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(CUTOFF_RESET)
|
||||
REPORT_NAME_DIGITAL(CUTOFF_RESET_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(CUTOFF_TEST)
|
||||
REPORT_NAME_DIGITAL(CUTOFF_TEST_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(DAC_DISABLE)
|
||||
REPORT_NAME_DIGITAL(DAC_DISABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(DAC_STEPPER_VREF) && DAC_STEPPER_VREF >= 0
|
||||
REPORT_NAME_DIGITAL(DAC_STEPPER_VREF, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(DEBUG)
|
||||
REPORT_NAME_DIGITAL(DEBUG_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(DIGIPOTS_I2C_SCL) && DIGIPOTS_I2C_SCL >= 0
|
||||
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SCL, __LINE__ )
|
||||
#endif
|
||||
#if defined(DIGIPOTS_I2C_SDA_E0) && DIGIPOTS_I2C_SDA_E0 >= 0
|
||||
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E0, __LINE__ )
|
||||
#endif
|
||||
#if defined(DIGIPOTS_I2C_SDA_E1) && DIGIPOTS_I2C_SDA_E1 >= 0
|
||||
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E1, __LINE__ )
|
||||
#endif
|
||||
#if defined(DIGIPOTS_I2C_SDA_X) && DIGIPOTS_I2C_SDA_X >= 0
|
||||
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_X, __LINE__ )
|
||||
#endif
|
||||
#if defined(DIGIPOTS_I2C_SDA_Y) && DIGIPOTS_I2C_SDA_Y >= 0
|
||||
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Y, __LINE__ )
|
||||
#endif
|
||||
#if defined(DIGIPOTS_I2C_SDA_Z) && DIGIPOTS_I2C_SDA_Z >= 0
|
||||
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Z, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(DIGIPOTSS)
|
||||
REPORT_NAME_DIGITAL(DIGIPOTSS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(DOGLCD_A0) && DOGLCD_A0 >= 0
|
||||
REPORT_NAME_DIGITAL(DOGLCD_A0, __LINE__ )
|
||||
#endif
|
||||
#if defined(DOGLCD_CS) && DOGLCD_CS >= 0
|
||||
REPORT_NAME_DIGITAL(DOGLCD_CS, __LINE__ )
|
||||
#endif
|
||||
#if defined(DOGLCD_MOSI) && DOGLCD_MOSI >= 0
|
||||
REPORT_NAME_DIGITAL(DOGLCD_MOSI, __LINE__ )
|
||||
#endif
|
||||
#if defined(DOGLCD_SCK) && DOGLCD_SCK >= 0
|
||||
REPORT_NAME_DIGITAL(DOGLCD_SCK, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_ATT)
|
||||
REPORT_NAME_DIGITAL(E0_ATT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(E0_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_CS)
|
||||
REPORT_NAME_DIGITAL(E0_CS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_DIR)
|
||||
REPORT_NAME_DIGITAL(E0_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_ENABLE)
|
||||
REPORT_NAME_DIGITAL(E0_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_MS1)
|
||||
REPORT_NAME_DIGITAL(E0_MS1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_MS2)
|
||||
REPORT_NAME_DIGITAL(E0_MS2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E0_STEP)
|
||||
REPORT_NAME_DIGITAL(E0_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E1_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(E1_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E1_CS)
|
||||
REPORT_NAME_DIGITAL(E1_CS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E1_DIR)
|
||||
REPORT_NAME_DIGITAL(E1_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E1_ENABLE)
|
||||
REPORT_NAME_DIGITAL(E1_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E1_MS1)
|
||||
REPORT_NAME_DIGITAL(E1_MS1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E1_MS2)
|
||||
REPORT_NAME_DIGITAL(E1_MS2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E1_STEP)
|
||||
REPORT_NAME_DIGITAL(E1_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E2_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(E2_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E2_DIR)
|
||||
REPORT_NAME_DIGITAL(E2_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E2_ENABLE)
|
||||
REPORT_NAME_DIGITAL(E2_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E2_STEP)
|
||||
REPORT_NAME_DIGITAL(E2_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E3_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(E3_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E3_DIR)
|
||||
REPORT_NAME_DIGITAL(E3_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E3_ENABLE)
|
||||
REPORT_NAME_DIGITAL(E3_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E3_STEP)
|
||||
REPORT_NAME_DIGITAL(E3_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E4_DIR)
|
||||
REPORT_NAME_DIGITAL(E4_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E4_ENABLE)
|
||||
REPORT_NAME_DIGITAL(E4_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(E4_STEP)
|
||||
REPORT_NAME_DIGITAL(E4_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(encrot0) && encrot0 >= 0
|
||||
REPORT_NAME_DIGITAL(encrot0, __LINE__ )
|
||||
#endif
|
||||
#if defined(encrot1) && encrot1 >= 0
|
||||
REPORT_NAME_DIGITAL(encrot1, __LINE__ )
|
||||
#endif
|
||||
#if defined(encrot2) && encrot2 >= 0
|
||||
REPORT_NAME_DIGITAL(encrot2, __LINE__ )
|
||||
#endif
|
||||
#if defined(encrot3) && encrot3 >= 0
|
||||
REPORT_NAME_DIGITAL(encrot3, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(EXT_AUX_A0, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 >= NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A0, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A0_IO) && EXT_AUX_A0_IO >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A0_IO, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(EXT_AUX_A1, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 >= NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A1, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A1_IO) && EXT_AUX_A1_IO >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A1_IO, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(EXT_AUX_A2, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 >= NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A2, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A2_IO) && EXT_AUX_A2_IO >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A2_IO, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(EXT_AUX_A3, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 >= NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A3, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A3_IO) && EXT_AUX_A3_IO >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A3_IO, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(EXT_AUX_A4, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 >= NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A4, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_A4_IO) && EXT_AUX_A4_IO >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_A4_IO, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_PWM_D24) && EXT_AUX_PWM_D24 >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_PWM_D24, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_RX1_D2) && EXT_AUX_RX1_D2 >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_RX1_D2, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_SCL_D0) && EXT_AUX_SCL_D0 >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_SCL_D0, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_SDA_D1) && EXT_AUX_SDA_D1 >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_SDA_D1, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXT_AUX_TX1_D3) && EXT_AUX_TX1_D3 >= 0
|
||||
REPORT_NAME_DIGITAL(EXT_AUX_TX1_D3, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXTRUDER_0_AUTO_FAN) && EXTRUDER_0_AUTO_FAN >= 0
|
||||
REPORT_NAME_DIGITAL(EXTRUDER_0_AUTO_FAN, __LINE__ )
|
||||
#endif
|
||||
#if defined(EXTRUDER_1_AUTO_FAN) && EXTRUDER_1_AUTO_FAN >= 0
|
||||
REPORT_NAME_DIGITAL(EXTRUDER_1_AUTO_FAN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(FAN)
|
||||
REPORT_NAME_DIGITAL(FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(FAN1)
|
||||
REPORT_NAME_DIGITAL(FAN1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(FAN2)
|
||||
REPORT_NAME_DIGITAL(FAN2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(FIL_RUNOUT)
|
||||
REPORT_NAME_DIGITAL(FIL_RUNOUT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(FILWIDTH_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(GEN7_VERSION) && GEN7_VERSION >= 0
|
||||
REPORT_NAME_DIGITAL(GEN7_VERSION, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_0)
|
||||
REPORT_NAME_DIGITAL(HEATER_0_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_1)
|
||||
REPORT_NAME_DIGITAL(HEATER_1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_2)
|
||||
REPORT_NAME_DIGITAL(HEATER_2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_3)
|
||||
REPORT_NAME_DIGITAL(HEATER_3_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_4)
|
||||
REPORT_NAME_DIGITAL(HEATER_4_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_5)
|
||||
REPORT_NAME_DIGITAL(HEATER_5_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_6)
|
||||
REPORT_NAME_DIGITAL(HEATER_6_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_7)
|
||||
REPORT_NAME_DIGITAL(HEATER_7_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HEATER_BED)
|
||||
REPORT_NAME_DIGITAL(HEATER_BED_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(HOME)
|
||||
REPORT_NAME_DIGITAL(HOME_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(I2C_SCL) && I2C_SCL >= 0
|
||||
REPORT_NAME_DIGITAL(I2C_SCL, __LINE__ )
|
||||
#endif
|
||||
#if defined(I2C_SDA) && I2C_SDA >= 0
|
||||
REPORT_NAME_DIGITAL(I2C_SDA, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(KILL)
|
||||
REPORT_NAME_DIGITAL(KILL_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LCD_BACKLIGHT)
|
||||
REPORT_NAME_DIGITAL(LCD_BACKLIGHT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(LCD_CONTRAST) && LCD_CONTRAST >= 0
|
||||
REPORT_NAME_DIGITAL(LCD_CONTRAST, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LCD)
|
||||
REPORT_NAME_DIGITAL(LCD_PINS_D4, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LCD)
|
||||
REPORT_NAME_DIGITAL(LCD_PINS_D5, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LCD)
|
||||
REPORT_NAME_DIGITAL(LCD_PINS_D6, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LCD)
|
||||
REPORT_NAME_DIGITAL(LCD_PINS_D7, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LCD)
|
||||
REPORT_NAME_DIGITAL(LCD_PINS_ENABLE, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LCD)
|
||||
REPORT_NAME_DIGITAL(LCD_PINS_RS, __LINE__ )
|
||||
#endif
|
||||
#if defined(LCD_SDSS) && LCD_SDSS >= 0
|
||||
REPORT_NAME_DIGITAL(LCD_SDSS, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(LED)
|
||||
REPORT_NAME_DIGITAL(LED_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(MAIN_VOLTAGE_MEASURE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(MAX6675_SS) && MAX6675_SS >= 0
|
||||
REPORT_NAME_DIGITAL(MAX6675_SS, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MISO)
|
||||
REPORT_NAME_DIGITAL(MISO_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOSFET_A)
|
||||
REPORT_NAME_DIGITAL(MOSFET_A_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOSFET_B)
|
||||
REPORT_NAME_DIGITAL(MOSFET_B_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOSFET_C)
|
||||
REPORT_NAME_DIGITAL(MOSFET_C_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOSFET_D)
|
||||
REPORT_NAME_DIGITAL(MOSFET_D_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOSI)
|
||||
REPORT_NAME_DIGITAL(MOSI_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
|
||||
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_E_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
|
||||
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_XY_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
|
||||
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_Z_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(NUM_TLCS) && NUM_TLCS >= 0
|
||||
REPORT_NAME_DIGITAL(NUM_TLCS, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(ORIG_E0_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(ORIG_E0_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(ORIG_E1_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(ORIG_E1_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(ORIG_E2_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(ORIG_E2_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(ORIG_E3_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(ORIG_E3_AUTO_FAN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(PHOTOGRAPH)
|
||||
REPORT_NAME_DIGITAL(PHOTOGRAPH_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(PS_ON)
|
||||
REPORT_NAME_DIGITAL(PS_ON_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(PWM_1)
|
||||
REPORT_NAME_DIGITAL(PWM_1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(PWM_2)
|
||||
REPORT_NAME_DIGITAL(PWM_2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(RAMPS_D10)
|
||||
REPORT_NAME_DIGITAL(RAMPS_D10_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(RAMPS_D8)
|
||||
REPORT_NAME_DIGITAL(RAMPS_D8_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(RAMPS_D9)
|
||||
REPORT_NAME_DIGITAL(RAMPS_D9_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(RX_ENABLE)
|
||||
REPORT_NAME_DIGITAL(RX_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SAFETY_TRIGGERED)
|
||||
REPORT_NAME_DIGITAL(SAFETY_TRIGGERED_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SCK)
|
||||
REPORT_NAME_DIGITAL(SCK_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(SCL) && SCL >= 0
|
||||
REPORT_NAME_DIGITAL(SCL, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SD_DETECT)
|
||||
REPORT_NAME_DIGITAL(SD_DETECT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(SDA) && SDA >= 0
|
||||
REPORT_NAME_DIGITAL(SDA, __LINE__ )
|
||||
#endif
|
||||
#if defined(SDPOWER) && SDPOWER >= 0
|
||||
REPORT_NAME_DIGITAL(SDPOWER, __LINE__ )
|
||||
#endif
|
||||
#if defined(SDSS) && SDSS >= 0
|
||||
REPORT_NAME_DIGITAL(SDSS, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SERVO0)
|
||||
REPORT_NAME_DIGITAL(SERVO0_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SERVO1)
|
||||
REPORT_NAME_DIGITAL(SERVO1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SERVO2)
|
||||
REPORT_NAME_DIGITAL(SERVO2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SERVO3)
|
||||
REPORT_NAME_DIGITAL(SERVO3_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(SHIFT_CLK) && SHIFT_CLK >= 0
|
||||
REPORT_NAME_DIGITAL(SHIFT_CLK, __LINE__ )
|
||||
#endif
|
||||
#if defined(SHIFT_EN) && SHIFT_EN >= 0
|
||||
REPORT_NAME_DIGITAL(SHIFT_EN, __LINE__ )
|
||||
#endif
|
||||
#if defined(SHIFT_LD) && SHIFT_LD >= 0
|
||||
REPORT_NAME_DIGITAL(SHIFT_LD, __LINE__ )
|
||||
#endif
|
||||
#if defined(SHIFT_OUT) && SHIFT_OUT >= 0
|
||||
REPORT_NAME_DIGITAL(SHIFT_OUT, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SLED)
|
||||
REPORT_NAME_DIGITAL(SLED_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SLEEP_WAKE)
|
||||
REPORT_NAME_DIGITAL(SLEEP_WAKE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SOL1)
|
||||
REPORT_NAME_DIGITAL(SOL1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SOL2)
|
||||
REPORT_NAME_DIGITAL(SOL2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(SPARE_IO) && SPARE_IO >= 0
|
||||
REPORT_NAME_DIGITAL(SPARE_IO, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SPINDLE_DIR)
|
||||
REPORT_NAME_DIGITAL(SPINDLE_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SPINDLE_LASER_ENABLE)
|
||||
REPORT_NAME_DIGITAL(SPINDLE_LASER_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SPINDLE_SPEED_LASER_POWER)
|
||||
REPORT_NAME_DIGITAL(SPINDLE_SPEED_LASER_POWER_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SR_CLK)
|
||||
REPORT_NAME_DIGITAL(SR_CLK_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SR_DATA)
|
||||
REPORT_NAME_DIGITAL(SR_DATA_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SR_STROBE)
|
||||
REPORT_NAME_DIGITAL(SR_STROBE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SS)
|
||||
REPORT_NAME_DIGITAL(SS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(STAT_LED_BLUE) && STAT_LED_BLUE >= 0
|
||||
REPORT_NAME_DIGITAL(STAT_LED_BLUE, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(STAT_LED_BLUE)
|
||||
REPORT_NAME_DIGITAL(STAT_LED_BLUE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(STAT_LED_RED) && STAT_LED_RED >= 0
|
||||
REPORT_NAME_DIGITAL(STAT_LED_RED, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(STAT_LED_RED)
|
||||
REPORT_NAME_DIGITAL(STAT_LED_RED_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(STEPPER_RESET)
|
||||
REPORT_NAME_DIGITAL(STEPPER_RESET_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(SUICIDE)
|
||||
REPORT_NAME_DIGITAL(SUICIDE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(TC1) && TC1 >= 0 && TC1 < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TC1, __LINE__ )
|
||||
#endif
|
||||
#if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TC2, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_0_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_3_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_4_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_BED_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_CHAMBER_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_X) && TEMP_X_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(TEMP_X_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(THERMO_DO)
|
||||
REPORT_NAME_DIGITAL(THERMO_DO_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(THERMO_SCK)
|
||||
REPORT_NAME_DIGITAL(THERMO_SCK_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(TLC_BLANK_BIT) && TLC_BLANK_BIT >= 0
|
||||
REPORT_NAME_DIGITAL(TLC_BLANK_BIT, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TLC_BLANK)
|
||||
REPORT_NAME_DIGITAL(TLC_BLANK_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(TLC_CLOCK_BIT) && TLC_CLOCK_BIT >= 0
|
||||
REPORT_NAME_DIGITAL(TLC_CLOCK_BIT, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TLC_CLOCK)
|
||||
REPORT_NAME_DIGITAL(TLC_CLOCK_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(TLC_DATA_BIT) && TLC_DATA_BIT >= 0
|
||||
REPORT_NAME_DIGITAL(TLC_DATA_BIT, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TLC_DATA)
|
||||
REPORT_NAME_DIGITAL(TLC_DATA_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TLC_XLAT)
|
||||
REPORT_NAME_DIGITAL(TLC_XLAT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_0)
|
||||
REPORT_NAME_DIGITAL(TOOL_0_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_0_PWM)
|
||||
REPORT_NAME_DIGITAL(TOOL_0_PWM_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_1)
|
||||
REPORT_NAME_DIGITAL(TOOL_1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_1_PWM)
|
||||
REPORT_NAME_DIGITAL(TOOL_1_PWM_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_2)
|
||||
REPORT_NAME_DIGITAL(TOOL_2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_2_PWM)
|
||||
REPORT_NAME_DIGITAL(TOOL_2_PWM_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_3)
|
||||
REPORT_NAME_DIGITAL(TOOL_3_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_3_PWM)
|
||||
REPORT_NAME_DIGITAL(TOOL_3_PWM_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TOOL_PWM)
|
||||
REPORT_NAME_DIGITAL(TOOL_PWM_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(TX_ENABLE)
|
||||
REPORT_NAME_DIGITAL(TX_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if defined(UI1) && UI1 >= 0
|
||||
REPORT_NAME_DIGITAL(UI1, __LINE__ )
|
||||
#endif
|
||||
#if defined(UI2) && UI2 >= 0
|
||||
REPORT_NAME_DIGITAL(UI2, __LINE__ )
|
||||
#endif
|
||||
#if defined(UNUSED_PWM) && UNUSED_PWM >= 0
|
||||
REPORT_NAME_DIGITAL(UNUSED_PWM, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_ATT)
|
||||
REPORT_NAME_DIGITAL(X_ATT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_CS)
|
||||
REPORT_NAME_DIGITAL(X_CS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_DIR)
|
||||
REPORT_NAME_DIGITAL(X_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_ENABLE)
|
||||
REPORT_NAME_DIGITAL(X_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_MAX)
|
||||
REPORT_NAME_DIGITAL(X_MAX_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_MIN)
|
||||
REPORT_NAME_DIGITAL(X_MIN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_MS1)
|
||||
REPORT_NAME_DIGITAL(X_MS1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_MS2)
|
||||
REPORT_NAME_DIGITAL(X_MS2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_STEP)
|
||||
REPORT_NAME_DIGITAL(X_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X_STOP)
|
||||
REPORT_NAME_DIGITAL(X_STOP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X2_DIR)
|
||||
REPORT_NAME_DIGITAL(X2_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X2_ENABLE)
|
||||
REPORT_NAME_DIGITAL(X2_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(X2_STEP)
|
||||
REPORT_NAME_DIGITAL(X2_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_ATT)
|
||||
REPORT_NAME_DIGITAL(Y_ATT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_CS)
|
||||
REPORT_NAME_DIGITAL(Y_CS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_DIR)
|
||||
REPORT_NAME_DIGITAL(Y_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_ENABLE)
|
||||
REPORT_NAME_DIGITAL(Y_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_MAX)
|
||||
REPORT_NAME_DIGITAL(Y_MAX_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_MIN)
|
||||
REPORT_NAME_DIGITAL(Y_MIN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_MS1)
|
||||
REPORT_NAME_DIGITAL(Y_MS1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_MS2)
|
||||
REPORT_NAME_DIGITAL(Y_MS2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_STEP)
|
||||
REPORT_NAME_DIGITAL(Y_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y_STOP)
|
||||
REPORT_NAME_DIGITAL(Y_STOP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y2_DIR)
|
||||
REPORT_NAME_DIGITAL(Y2_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y2_ENABLE)
|
||||
REPORT_NAME_DIGITAL(Y2_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Y2_STEP)
|
||||
REPORT_NAME_DIGITAL(Y2_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_ATT)
|
||||
REPORT_NAME_DIGITAL(Z_ATT_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_CS)
|
||||
REPORT_NAME_DIGITAL(Z_CS_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_DIR)
|
||||
REPORT_NAME_DIGITAL(Z_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_ENABLE)
|
||||
REPORT_NAME_DIGITAL(Z_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_MAX)
|
||||
REPORT_NAME_DIGITAL(Z_MAX_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_MIN)
|
||||
REPORT_NAME_DIGITAL(Z_MIN_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_MIN_PROBE)
|
||||
REPORT_NAME_DIGITAL(Z_MIN_PROBE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_MS1)
|
||||
REPORT_NAME_DIGITAL(Z_MS1_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_MS2)
|
||||
REPORT_NAME_DIGITAL(Z_MS2_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_STEP)
|
||||
REPORT_NAME_DIGITAL(Z_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z_STOP)
|
||||
REPORT_NAME_DIGITAL(Z_STOP_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z2_DIR)
|
||||
REPORT_NAME_DIGITAL(Z2_DIR_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z2_ENABLE)
|
||||
REPORT_NAME_DIGITAL(Z2_ENABLE_PIN, __LINE__ )
|
||||
#endif
|
||||
#if PIN_EXISTS(Z2_STEP)
|
||||
REPORT_NAME_DIGITAL(Z2_STEP_PIN, __LINE__ )
|
||||
#endif
|
||||
Loading…
Reference in New Issue