melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Improve Trinamic support in the EEPROM

Browse Source
2.0.x
Scott Lahteine 7 years ago
parent 48d7036874
commit c95450016b
2 changed files with 274 additions and 172 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/src/feature/tmc_util.h
Unescape Escape View File

@ -35,7 +35,7 @@
extern bool report_tmc_status;
enum TMC_AxisEnum : char { TMC_X, TMC_X2, TMC_Y, TMC_Y2, TMC_Z, TMC_Z2, TMC_E0, TMC_E1, TMC_E2, TMC_E3, TMC_E4 };
enum TMC_AxisEnum : char { TMC_X, TMC_Y, TMC_Z, TMC_X2, TMC_Y2, TMC_Z2, TMC_E0, TMC_E1, TMC_E2, TMC_E3, TMC_E4 };
constexpr uint32_t _tmc_thrs(const uint16_t msteps, const int32_t thrs, const uint32_t spmm) {
return 12650000UL * msteps / (256 * thrs * spmm);

444
Marlin/src/module/configuration_store.cpp
Unescape Escape View File

@ -37,7 +37,7 @@
*/
// Change EEPROM version if the structure changes
#define EEPROM_VERSION "V52"
#define EEPROM_VERSION "V53"
#define EEPROM_OFFSET 100
// Check the integrity of data offsets.
@ -74,8 +74,10 @@
#include "../module/probe.h"
#endif
#if ENABLED(HAVE_TMC2130)
#if HAS_TRINAMIC
#include "stepper_indirection.h"
#include "../feature/tmc_util.h"
#define TMC_GET_PWMTHRS(P,Q) _tmc_thrs(stepper##Q.microsteps(), stepper##Q.TPWMTHRS(), planner.axis_steps_per_mm[P##_AXIS])
#endif
#if ENABLED(FWRETRACT)
@ -230,7 +232,9 @@ typedef struct SettingsDataStruct {
//
// HAS_TRINAMIC
//
uint16_t tmc_stepper_current[11]; // M906 X Y Z X2 Y2 Z2 E0 E1 E2 E3 E4
#define TMC_AXES (MAX_EXTRUDERS + 6)
uint16_t tmc_stepper_current[TMC_AXES]; // M906 X Y Z X2 Y2 Z2 E0 E1 E2 E3 E4
uint32_t tmc_hybrid_threshold[TMC_AXES]; // M913 X Y Z X2 Y2 Z2 E0 E1 E2 E3 E4
int16_t tmc_sgt[XYZ]; // M914 X Y Z
//
@ -658,7 +662,7 @@ void MarlinSettings::postprocess() {
_FIELD_TEST(tmc_stepper_current);
uint16_t currents[11] = {
uint16_t tmc_stepper_current[TMC_AXES] = {
#if HAS_TRINAMIC
#if X_IS_TRINAMIC
stepperX.getCurrent(),
@ -719,24 +723,95 @@ void MarlinSettings::postprocess() {
0
#endif
};
EEPROM_WRITE(currents);
EEPROM_WRITE(tmc_stepper_current);
//
// Save TMC2130 or TMC2208 Hybrid Threshold, and placeholder values
//
_FIELD_TEST(tmc_hybrid_threshold);
uint32_t tmc_hybrid_threshold[TMC_AXES] = {
#if HAS_TRINAMIC
#if X_IS_TRINAMIC
TMC_GET_PWMTHRS(X, X),
#else
X_HYBRID_THRESHOLD,
#endif
#if Y_IS_TRINAMIC
TMC_GET_PWMTHRS(Y, Y),
#else
Y_HYBRID_THRESHOLD,
#endif
#if Z_IS_TRINAMIC
TMC_GET_PWMTHRS(Z, Z),
#else
Z_HYBRID_THRESHOLD,
#endif
#if X2_IS_TRINAMIC
TMC_GET_PWMTHRS(X, X2),
#else
X2_HYBRID_THRESHOLD,
#endif
#if Y2_IS_TRINAMIC
TMC_GET_PWMTHRS(Y, Y2),
#else
Y2_HYBRID_THRESHOLD,
#endif
#if Z2_IS_TRINAMIC
TMC_GET_PWMTHRS(Z, Z2),
#else
Z2_HYBRID_THRESHOLD,
#endif
#if E0_IS_TRINAMIC
TMC_GET_PWMTHRS(E, E0),
#else
E0_HYBRID_THRESHOLD,
#endif
#if E1_IS_TRINAMIC
TMC_GET_PWMTHRS(E, E1),
#else
E1_HYBRID_THRESHOLD,
#endif
#if E2_IS_TRINAMIC
TMC_GET_PWMTHRS(E, E2),
#else
E2_HYBRID_THRESHOLD,
#endif
#if E3_IS_TRINAMIC
TMC_GET_PWMTHRS(E, E3),
#else
E3_HYBRID_THRESHOLD,
#endif
#if E4_IS_TRINAMIC
TMC_GET_PWMTHRS(E, E4)
#else
E4_HYBRID_THRESHOLD
#endif
#else
100, 100, 3, // X, Y, Z
100, 100, 3, // X2, Y2, Z2
30, 30, 30, 30, 30 // E0, E1, E2, E3, E4
#endif
};
EEPROM_WRITE(tmc_hybrid_threshold);
//
// TMC2130 Sensorless homing threshold
//
int16_t thrs[XYZ] = {
int16_t tmc_sgt[XYZ] = {
#if ENABLED(SENSORLESS_HOMING)
#if ENABLED(X_IS_TMC2130) && defined(X_HOMING_SENSITIVITY)
#if defined(X_HOMING_SENSITIVITY) && (ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS))
stepperX.sgt(),
#else
0,
#endif
#if ENABLED(Y_IS_TMC2130) && defined(Y_HOMING_SENSITIVITY)
#if defined(Y_HOMING_SENSITIVITY) && (ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS))
stepperY.sgt(),
#else
0
#endif
#if ENABLED(Z_IS_TMC2130) && defined(Z_HOMING_SENSITIVITY)
#if defined(Z_HOMING_SENSITIVITY) && (ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS))
stepperZ.sgt()
#else
0
@ -745,7 +820,7 @@ void MarlinSettings::postprocess() {
0
#endif
};
EEPROM_WRITE(thrs);
EEPROM_WRITE(tmc_sgt);
//
// Linear Advance
@ -794,7 +869,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(planner.yz_skew_factor);
#else
dummy = 0.0f;
for (uint8_t q = XYZ; q--;) EEPROM_WRITE(dummy);
for (uint8_t q = 3; q--;) EEPROM_WRITE(dummy);
#endif
//
@ -1197,54 +1272,101 @@ void MarlinSettings::postprocess() {
#endif
if (!validating) reset_stepper_drivers();
//
// TMC2130 Stepper Current
// TMC2130 Stepper Settings
//
_FIELD_TEST(tmc_stepper_current);
#if HAS_TRINAMIC
#define SET_CURR(N,Q) stepper##Q.setCurrent(currents[N] ? currents[N] : Q##_CURRENT, R_SENSE, HOLD_MULTIPLIER)
uint16_t currents[11];
#define SET_CURR(Q) stepper##Q.setCurrent(currents[TMC_##Q] ? currents[TMC_##Q] : Q##_CURRENT, R_SENSE, HOLD_MULTIPLIER)
uint16_t currents[TMC_AXES];
EEPROM_READ(currents);
if (!validating) {
#if X_IS_TRINAMIC
SET_CURR(0, X);
SET_CURR(X);
#endif
#if Y_IS_TRINAMIC
SET_CURR(1, Y);
SET_CURR(Y);
#endif
#if Z_IS_TRINAMIC
SET_CURR(2, Z);
SET_CURR(Z);
#endif
#if X2_IS_TRINAMIC
SET_CURR(3, X2);
SET_CURR(X2);
#endif
#if Y2_IS_TRINAMIC
SET_CURR(4, Y2);
SET_CURR(Y2);
#endif
#if Z2_IS_TRINAMIC
SET_CURR(5, Z2);
SET_CURR(Z2);
#endif
#if E0_IS_TRINAMIC
SET_CURR(6, E0);
SET_CURR(E0);
#endif
#if E1_IS_TRINAMIC
SET_CURR(7, E1);
SET_CURR(E1);
#endif
#if E2_IS_TRINAMIC
SET_CURR(8, E2);
SET_CURR(E2);
#endif
#if E3_IS_TRINAMIC
SET_CURR(9, E3);
SET_CURR(E3);
#endif
#if E4_IS_TRINAMIC
SET_CURR(10, E4);
SET_CURR(E4);
#endif
}
#else
uint16_t val;
for (uint8_t q=11; q--;) EEPROM_READ(val);
for (uint8_t q=TMC_AXES; q--;) EEPROM_READ(val);
#endif
#if HAS_TRINAMIC
#define TMC_SET_PWMTHRS(P,Q) tmc_set_pwmthrs(stepper##Q, TMC_##Q, tmc_hybrid_threshold[TMC_##Q], planner.axis_steps_per_mm[P##_AXIS])
uint16_t tmc_hybrid_threshold[TMC_AXES];
EEPROM_READ(tmc_hybrid_threshold);
if (!validating) {
#if X_IS_TRINAMIC
TMC_SET_PWMTHRS(X, X);
#endif
#if Y_IS_TRINAMIC
TMC_SET_PWMTHRS(Y, Y);
#endif
#if Z_IS_TRINAMIC
TMC_SET_PWMTHRS(Z, Z);
#endif
#if X2_IS_TRINAMIC
TMC_SET_PWMTHRS(X, X2);
#endif
#if Y2_IS_TRINAMIC
TMC_SET_PWMTHRS(Y, Y2);
#endif
#if Z2_IS_TRINAMIC
TMC_SET_PWMTHRS(Z, Z2);
#endif
#if E0_IS_TRINAMIC
TMC_SET_PWMTHRS(E, E0);
#endif
#if E1_IS_TRINAMIC
TMC_SET_PWMTHRS(E, E1);
#endif
#if E2_IS_TRINAMIC
TMC_SET_PWMTHRS(E, E2);
#endif
#if E3_IS_TRINAMIC
TMC_SET_PWMTHRS(E, E3);
#endif
#if E4_IS_TRINAMIC
TMC_SET_PWMTHRS(E, E4);
#endif
}
#else
uint16_t thrs_val;
for (uint8_t q=TMC_AXES; q--;) EEPROM_READ(thrs_val);
#endif
/*
@ -1253,32 +1375,32 @@ void MarlinSettings::postprocess() {
* Y and Y2 use the same value
* Z and Z2 use the same value
*/
int16_t thrs[XYZ];
EEPROM_READ(thrs);
int16_t tmc_sgt[XYZ];
EEPROM_READ(tmc_sgt);
#if ENABLED(SENSORLESS_HOMING)
if (!validating) {
#ifdef X_HOMING_SENSITIVITY
#if ENABLED(X_IS_TMC2130)
stepperX.sgt(thrs[0]);
#if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
stepperX.sgt(tmc_sgt[0]);
#endif
#if ENABLED(X2_IS_TMC2130)
stepperX2.sgt(thrs[0]);
stepperX2.sgt(tmc_sgt[0]);
#endif
#endif
#ifdef Y_HOMING_SENSITIVITY
#if ENABLED(Y_IS_TMC2130)
stepperY.sgt(thrs[1]);
#if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
stepperY.sgt(tmc_sgt[1]);
#endif
#if ENABLED(Y2_IS_TMC2130)
stepperY2.sgt(thrs[1]);
stepperY2.sgt(tmc_sgt[1]);
#endif
#endif
#ifdef Z_HOMING_SENSITIVITY
#if ENABLED(Z_IS_TMC2130)
stepperZ.sgt(thrs[2]);
#if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
stepperZ.sgt(tmc_sgt[2]);
#endif
#if ENABLED(Z2_IS_TMC2130)
stepperZ2.sgt(thrs[2]);
stepperZ2.sgt(tmc_sgt[2]);
#endif
#endif
}
@ -1338,7 +1460,7 @@ void MarlinSettings::postprocess() {
EEPROM_READ(dummy);
#endif
#else
for (uint8_t q = XYZ; q--;) EEPROM_READ(dummy);
for (uint8_t q = 3; q--;) EEPROM_READ(dummy);
#endif
//
@ -1731,66 +1853,7 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif
);
#if X_IS_TRINAMIC
stepperX.setCurrent(X_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if Y_IS_TRINAMIC
stepperY.setCurrent(Y_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if Z_IS_TRINAMIC
stepperZ.setCurrent(Z_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if X2_IS_TRINAMIC
stepperX2.setCurrent(X2_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if Y2_IS_TRINAMIC
stepperY2.setCurrent(Y2_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if Z2_IS_TRINAMIC
stepperZ2.setCurrent(Z2_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if E0_IS_TRINAMIC
stepperE0.setCurrent(E0_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if E1_IS_TRINAMIC
stepperE1.setCurrent(E1_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if E2_IS_TRINAMIC
stepperE2.setCurrent(E2_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if E3_IS_TRINAMIC
stepperE3.setCurrent(E3_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if E4_IS_TRINAMIC
stepperE4.setCurrent(E4_CURRENT, R_SENSE, HOLD_MULTIPLIER);
#endif
#if ENABLED(SENSORLESS_HOMING)
#ifdef X_HOMING_SENSITIVITY
#if ENABLED(X_IS_TMC2130)
stepperX.sgt(X_HOMING_SENSITIVITY);
#endif
#if ENABLED(X2_IS_TMC2130)
stepperX2.sgt(X_HOMING_SENSITIVITY);
#endif
#endif
#ifdef Y_HOMING_SENSITIVITY
#if ENABLED(Y_IS_TMC2130)
stepperY.sgt(Y_HOMING_SENSITIVITY);
#endif
#if ENABLED(Y2_IS_TMC2130)
stepperY2.sgt(Y_HOMING_SENSITIVITY);
#endif
#endif
#ifdef Z_HOMING_SENSITIVITY
#if ENABLED(Z_IS_TMC2130)
stepperZ.sgt(Z_HOMING_SENSITIVITY);
#endif
#if ENABLED(Z2_IS_TMC2130)
stepperZ2.sgt(Z_HOMING_SENSITIVITY);
#endif
#endif
#endif
reset_stepper_drivers();
#if ENABLED(LIN_ADVANCE)
planner.extruder_advance_K = LIN_ADVANCE_K;
@ -1829,6 +1892,10 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START_P(port); }while(0)
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void say_M603() { SERIAL_ECHOPGM_P(port, " M603 "); }
#endif
/**
* M503 - Report current settings in RAM
*
@ -1849,7 +1916,7 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOPGM_P(port, " G2");
SERIAL_CHAR_P(port, parser.linear_unit_factor == 1.0 ? '1' : '0');
SERIAL_ECHOPGM_P(port, " ; Units in ");
serialprintPGM(parser.linear_unit_factor == 1.0 ? PSTR("mm\n") : PSTR("inches\n"));
serialprintPGM_P(port, parser.linear_unit_factor == 1.0 ? PSTR("mm\n") : PSTR("inches\n"));
#else
#define LINEAR_UNIT(N) (N)
#define VOLUMETRIC_UNIT(N) (N)
@ -2076,7 +2143,7 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOPAIR_P(port, " G29 S3 X", (int)px + 1);
SERIAL_ECHOPAIR_P(port, " Y", (int)py + 1);
SERIAL_ECHOPGM_P(port, " Z");
SERIAL_PROTOCOL_F_P(port, LINEAR_UNIT(mbl.z_values[px][py]), 5);
SERIAL_ECHO_F_P(port, LINEAR_UNIT(mbl.z_values[px][py]), 5);
SERIAL_EOL_P(port);
}
}
@ -2103,7 +2170,7 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOPAIR_P(port, " G29 W I", (int)px + 1);
SERIAL_ECHOPAIR_P(port, " J", (int)py + 1);
SERIAL_ECHOPGM_P(port, " Z");
SERIAL_PROTOCOL_F_P(port, LINEAR_UNIT(z_values[px][py]), 5);
SERIAL_ECHO_F_P(port, LINEAR_UNIT(z_values[px][py]), 5);
SERIAL_EOL_P(port);
}
}
@ -2289,95 +2356,124 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOPGM_P(port, " K");
SERIAL_ECHO_F_P(port, LINEAR_UNIT(planner.yz_skew_factor), 6);
SERIAL_EOL_P(port);
#else
#else
SERIAL_ECHOPGM_P(port, " M852 S");
SERIAL_ECHO_F_P(port, LINEAR_UNIT(planner.xy_skew_factor), 6);
SERIAL_EOL_P(port);
#endif
#endif
/**
* TMC2130 stepper driver current
*/
#if HAS_TRINAMIC
/**
* TMC2130 / TMC2208 / TRAMS stepper driver current
*/
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Stepper driver current:");
}
CONFIG_ECHO_START;
SERIAL_ECHOPGM_P(port, " M906");
#if ENABLED(X_IS_TMC2130) || ENABLED(X_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " X ", stepperX.getCurrent());
#if X_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " X", stepperX.getCurrent());
#elif X2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " X", stepperX2.getCurrent());
#endif
#if ENABLED(Y_IS_TMC2130) || ENABLED(Y_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " Y ", stepperY.getCurrent());
#if Y_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Y", stepperY.getCurrent());
#elif Y2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Y", stepperY2.getCurrent());
#endif
#if ENABLED(Z_IS_TMC2130) || ENABLED(Z_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " Z ", stepperZ.getCurrent());
#if Z_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Z", stepperZ.getCurrent());
#elif Z2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.getCurrent());
#endif
#if ENABLED(X2_IS_TMC2130) || ENABLED(X2_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " X2 ", stepperX2.getCurrent());
#if E0_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", stepperE0.getCurrent());
#elif E1_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", stepperE1.getCurrent());
#elif E2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", stepperE2.getCurrent());
#elif E3_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", stepperE3.getCurrent());
#elif E4_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", stepperE4.getCurrent());
#endif
#if ENABLED(Y2_IS_TMC2130) || ENABLED(Y2_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " Y2 ", stepperY2.getCurrent());
#endif
#if ENABLED(Z2_IS_TMC2130) || ENABLED(Z2_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " Z2 ", stepperZ2.getCurrent());
#endif
#if ENABLED(E0_IS_TMC2130) || ENABLED(E0_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " E0 ", stepperE0.getCurrent());
#endif
#if ENABLED(E1_IS_TMC2130) || ENABLED(E1_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " E1 ", stepperE1.getCurrent());
#endif
#if ENABLED(E2_IS_TMC2130) || ENABLED(E2_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " E2 ", stepperE2.getCurrent());
#endif
#if ENABLED(E3_IS_TMC2130) || ENABLED(E3_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " E3 ", stepperE3.getCurrent());
#endif
#if ENABLED(E4_IS_TMC2130) || ENABLED(E4_IS_TMC2208)
SERIAL_ECHOPAIR_P(port, " E4 ", stepperE4.getCurrent());
#endif
SERIAL_EOL_P(port);
#endif
SERIAL_EOL();
/**
* TMC2130 Sensorless homing thresholds
*/
#if ENABLED(SENSORLESS_HOMING)
/**
* TMC2130 / TMC2208 / TRAMS Hybrid Threshold
*/
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Sensorless homing threshold:");
SERIAL_ECHOLNPGM_P(port, "Hybrid Threshold:");
}
CONFIG_ECHO_START;
SERIAL_ECHOPGM_P(port, " M914");
#ifdef X_HOMING_SENSITIVITY
#if ENABLED(X_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " X", stepperX.sgt());
#endif
#if ENABLED(X2_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " X2 ", stepperX2.sgt());
#endif
SERIAL_ECHOPGM_P(port, " M913");
#if X_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X));
#elif X2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X2));
#endif
#ifdef Y_HOMING_SENSITIVITY
#if ENABLED(Y_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " Y", stepperY.sgt());
#endif
#if ENABLED(Y2_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " Y2 ", stepperY2.sgt());
#endif
#if Y_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y));
#elif Y2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y2));
#endif
#ifdef Z_HOMING_SENSITIVITY
#if ENABLED(Z_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " Z ", stepperZ.sgt());
#endif
#if ENABLED(Z2_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " Z2 ", stepperZ2.sgt());
#endif
#if Z_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z));
#elif Z2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z2));
#endif
SERIAL_EOL_P(port);
#endif
#if E0_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E0));
#elif E1_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E1));
#elif E2_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E2));
#elif E3_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E3));
#elif E4_IS_TRINAMIC
SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E4));
#endif
SERIAL_EOL();
/**
* TMC2130 Sensorless homing thresholds
*/
#if ENABLED(SENSORLESS_HOMING)
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Sensorless homing threshold:");
}
CONFIG_ECHO_START;
SERIAL_ECHOPGM_P(port, " M914");
#ifdef X_HOMING_SENSITIVITY
#if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
SERIAL_ECHOPAIR_P(port, " X", stepperX.sgt());
#elif ENABLED(X2_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " X", stepperX2.sgt());
#endif
#endif
#ifdef Y_HOMING_SENSITIVITY
#if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
SERIAL_ECHOPAIR_P(port, " Y", stepperY.sgt());
#elif ENABLED(Y2_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " Y", stepperY2.sgt());
#endif
#endif
#ifdef Z_HOMING_SENSITIVITY
#if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
SERIAL_ECHOPAIR_P(port, " Z", stepperZ.sgt());
#elif ENABLED(Z2_IS_TMC2130)
SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.sgt());
#endif
#endif
SERIAL_EOL();
#endif
#endif // HAS_TRINAMIC
/**
* Linear Advance
@ -2413,25 +2509,31 @@ void MarlinSettings::reset(PORTARG_SOLO) {
}
CONFIG_ECHO_START;
#if EXTRUDERS == 1
SERIAL_ECHOPAIR_P(port, " M603 L", LINEAR_UNIT(filament_change_load_length[0]));
say_M603();
SERIAL_ECHOPAIR_P(port, "L", LINEAR_UNIT(filament_change_load_length[0]));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(filament_change_unload_length[0]));
#else
SERIAL_ECHOPAIR_P(port, " M603 T0 L", LINEAR_UNIT(filament_change_load_length[0]));
say_M603();
SERIAL_ECHOPAIR_P(port, "T0 L", LINEAR_UNIT(filament_change_load_length[0]));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(filament_change_unload_length[0]));
CONFIG_ECHO_START;
SERIAL_ECHOPAIR_P(port, " M603 T1 L", LINEAR_UNIT(filament_change_load_length[1]));
say_M603();
SERIAL_ECHOPAIR_P(port, "T1 L", LINEAR_UNIT(filament_change_load_length[1]));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(filament_change_unload_length[1]));
#if EXTRUDERS > 2
CONFIG_ECHO_START;
SERIAL_ECHOPAIR_P(port, " M603 T2 L", LINEAR_UNIT(filament_change_load_length[2]));
say_M603();
SERIAL_ECHOPAIR_P(port, "T2 L", LINEAR_UNIT(filament_change_load_length[2]));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(filament_change_unload_length[2]));
#if EXTRUDERS > 3
CONFIG_ECHO_START;
SERIAL_ECHOPAIR_P(port, " M603 T3 L", LINEAR_UNIT(filament_change_load_length[3]));
say_M603();
SERIAL_ECHOPAIR_P(port, "T3 L", LINEAR_UNIT(filament_change_load_length[3]));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(filament_change_unload_length[3]));
#if EXTRUDERS > 4
CONFIG_ECHO_START;
SERIAL_ECHOPAIR_P(port, " M603 T4 L", LINEAR_UNIT(filament_change_load_length[4]));
say_M603();
SERIAL_ECHOPAIR_P(port, "T4 L", LINEAR_UNIT(filament_change_load_length[4]));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(filament_change_unload_length[4]));
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3

Write Preview
Loading…
Cancel
Save