From 4f7c6dfe35faf351214e8d31a99fa61a9d95603b Mon Sep 17 00:00:00 2001
From: phq1910 <phq1910@terra.com.br>
Date: Thu, 26 Sep 2013 11:40:54 -0300
Subject: [PATCH] Update pins.h

Include Pins cpu Sethi 3D
---
 Marlin/pins.h | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/Marlin/pins.h b/Marlin/pins.h
index cbc45abc7f..1ae3cb486b 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -53,6 +53,83 @@
 
 #endif /* 99 */
 
+/****************************************************************************************
+* Sethi 3D_1 pin assignment - www.sethi3d.com.br
+*
+****************************************************************************************/
+
+#if MOTHERBOARD == 20
+#define KNOWN_BOARD
+
+#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
+#error Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu.
+
+#endif
+
+#ifndef GEN7_VERSION
+#define GEN7_VERSION 12 // v1.x
+#endif
+
+//x axis pins
+#define X_STEP_PIN 19
+#define X_DIR_PIN 18
+#define X_ENABLE_PIN 24
+#define X_STOP_PIN 2
+
+//y axis pins
+#define Y_STEP_PIN 23
+#define Y_DIR_PIN 22
+#define Y_ENABLE_PIN 24
+#define Y_STOP_PIN 0
+
+//z axis pins
+#define Z_STEP_PIN 26
+#define Z_DIR_PIN 25
+#define Z_ENABLE_PIN 24
+#define Z_MIN_PIN 1
+#define Z_MAX_PIN 0
+
+//extruder pins
+#define E0_STEP_PIN 28
+#define E0_DIR_PIN 27
+#define E0_ENABLE_PIN 24
+
+#define TEMP_0_PIN 1
+#define TEMP_1_PIN -1
+#define TEMP_2_PIN -1
+#define TEMP_BED_PIN 2
+
+#define HEATER_0_PIN 4
+#define HEATER_1_PIN -1
+#define HEATER_2_PIN -1
+#define HEATER_BED_PIN 3
+
+#define KILL_PIN -1
+
+#define SDPOWER -1
+#define SDSS -1 // SCL pin of I2C header
+#define LED_PIN -1
+
+#if (GEN7_VERSION >= 13)
+// Gen7 v1.3 removed the fan pin
+#define FAN_PIN -1
+#else
+#define FAN_PIN 31
+#endif
+#define PS_ON_PIN 15
+
+//All these generations of Gen7 supply thermistor power
+//via PS_ON, so ignore bad thermistor readings
+#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
+
+//our pin for debugging.
+#define DEBUG_PIN 0
+
+//our RS485 pins
+#define TX_ENABLE_PIN 12
+#define RX_ENABLE_PIN 13
+
+#endif
 
 /****************************************************************************************
 * Gen7 v1.1, v1.2, v1.3 pin assignment