From c76008bd6a7bc0f88fec7fa58f11cfec88ab366f Mon Sep 17 00:00:00 2001 From: Sola <42537573+solawc@users.noreply.github.com> Date: Sun, 28 Feb 2021 07:35:32 +0800 Subject: [PATCH] MKS H43 controller (#20609) --- Marlin/Configuration.h | 1 + Marlin/Configuration_adv.h | 6 +- Marlin/src/HAL/STM32/eeprom_flash.cpp | 2 +- .../shared/cpu_exception/exception_arm.cpp | 2 +- Marlin/src/HAL/shared/eeprom_if_i2c.cpp | 8 +- Marlin/src/MarlinCore.cpp | 5 + Marlin/src/gcode/sd/M24_M25.cpp | 15 +- Marlin/src/inc/Conditionals_LCD.h | 2 +- Marlin/src/inc/SanityCheck.h | 2 +- Marlin/src/lcd/extui/dgus_lcd.cpp | 7 +- Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.cpp | 38 +- Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.h | 7 +- .../src/lcd/extui/lib/dgus/DGUSDisplayDef.h | 11 +- .../lcd/extui/lib/dgus/DGUSScreenHandler.cpp | 560 +---- .../lcd/extui/lib/dgus/DGUSScreenHandler.h | 224 +- .../lib/dgus/fysetc/DGUSScreenHandler.cpp | 418 ++++ .../extui/lib/dgus/fysetc/DGUSScreenHandler.h | 240 ++ .../lib/dgus/hiprecy/DGUSScreenHandler.cpp | 418 ++++ .../lib/dgus/hiprecy/DGUSScreenHandler.h | 240 ++ .../lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp | 795 +++++++ .../lcd/extui/lib/dgus/mks/DGUSDisplayDef.h | 908 +++++++ .../extui/lib/dgus/mks/DGUSScreenHandler.cpp | 2109 +++++++++++++++++ .../extui/lib/dgus/mks/DGUSScreenHandler.h | 307 +++ .../extui/lib/dgus/origin/DGUSDisplayDef.cpp | 6 +- .../lib/dgus/origin/DGUSScreenHandler.cpp | 418 ++++ .../extui/lib/dgus/origin/DGUSScreenHandler.h | 240 ++ .../lcd/extui/lib/mks_ui/draw_manuaLevel.cpp | 2 + .../lcd/extui/lib/mks_ui/draw_move_motor.cpp | 14 +- .../lcd/extui/lib/mks_ui/draw_ready_print.cpp | 12 +- Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h | 2 +- .../src/lcd/extui/lib/mks_ui/wifi_module.cpp | 8 +- .../src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h | 2 + platformio.ini | 5 + 33 files changed, 6314 insertions(+), 720 deletions(-) create mode 100644 Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.cpp create mode 100644 Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h create mode 100644 Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.cpp create mode 100644 Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h create mode 100644 Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp create mode 100644 Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.h create mode 100644 Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp create mode 100644 Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h create mode 100644 Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.cpp create mode 100644 Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c813093554..79b7f9dffa 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -2349,6 +2349,7 @@ //#define DGUS_LCD_UI_ORIGIN //#define DGUS_LCD_UI_FYSETC //#define DGUS_LCD_UI_HIPRECY +//#define DGUS_LCD_UI_MKS // // Touch-screen LCD for Malyan M200/M300 printers diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 76a6a0bb58..0e1cbd9a35 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1517,12 +1517,12 @@ #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #if ANY(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_MKS, DGUS_LCD_UI_HIPRECY) #define DGUS_PRINT_FILENAME // Display the filename during printing #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DGUS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_MKS) + //#define DGUS_UI_MOVE_DIS_OPTION // Disabled by default for FYSETC and MKS #else #define DGUS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY #endif diff --git a/Marlin/src/HAL/STM32/eeprom_flash.cpp b/Marlin/src/HAL/STM32/eeprom_flash.cpp index 633a286dc8..5862090f1b 100644 --- a/Marlin/src/HAL/STM32/eeprom_flash.cpp +++ b/Marlin/src/HAL/STM32/eeprom_flash.cpp @@ -48,7 +48,7 @@ #include "stm32_def.h" #define DEBUG_OUT ENABLED(EEPROM_CHITCHAT) - #include "src/core/debug_out.h" + #include "../../core/debug_out.h" #ifndef MARLIN_EEPROM_SIZE #define MARLIN_EEPROM_SIZE 0x1000 // 4KB diff --git a/Marlin/src/HAL/shared/cpu_exception/exception_arm.cpp b/Marlin/src/HAL/shared/cpu_exception/exception_arm.cpp index 090148683f..ae9600038a 100644 --- a/Marlin/src/HAL/shared/cpu_exception/exception_arm.cpp +++ b/Marlin/src/HAL/shared/cpu_exception/exception_arm.cpp @@ -283,7 +283,7 @@ void CommonHandler_C(ContextStateFrame * frame, unsigned long lr, unsigned long savedFrame.CFSR = 0; frame->pc = (uint32_t)resume_from_fault; // Patch where to return to - frame->lr = 0xdeadbeef; // If our handler returns (it shouldn't), let's make it trigger an exception immediately + frame->lr = 0xDEADBEEF; // If our handler returns (it shouldn't), let's make it trigger an exception immediately frame->xpsr = _BV(24); // Need to clean the PSR register to thumb II only MinSerial::force_using_default_output = true; return; // The CPU will resume in our handler hopefully, and we'll try to use default serial output diff --git a/Marlin/src/HAL/shared/eeprom_if_i2c.cpp b/Marlin/src/HAL/shared/eeprom_if_i2c.cpp index cc22bf7d98..da70af2772 100644 --- a/Marlin/src/HAL/shared/eeprom_if_i2c.cpp +++ b/Marlin/src/HAL/shared/eeprom_if_i2c.cpp @@ -32,7 +32,13 @@ #include "eeprom_if.h" #include -void eeprom_init() { Wire.begin(); } +void eeprom_init() { + Wire.begin( + #if PINS_EXIST(I2C_SCL, I2C_SDA) + uint8_t(I2C_SDA_PIN), uint8_t(I2C_SCL_PIN) + #endif + ); +} #if ENABLED(USE_SHARED_EEPROM) diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index 723276da24..4643328401 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -231,6 +231,10 @@ #include "feature/password/password.h" #endif +#if ENABLED(DGUS_LCD_UI_MKS) + #include "lcd/extui/lib/dgus/DGUSScreenHandler.h" +#endif + PGMSTR(M112_KILL_STR, "M112 Shutdown"); MarlinState marlin_state = MF_INITIALIZING; @@ -388,6 +392,7 @@ void startOrResumeJob() { if (queue.enqueue_one_P(PSTR("M1001"))) { marlin_state = MF_RUNNING; TERN_(PASSWORD_AFTER_SD_PRINT_END, password.lock_machine()); + TERN_(DGUS_LCD_UI_MKS, ScreenHandler.SDPrintingFinished()); } } diff --git a/Marlin/src/gcode/sd/M24_M25.cpp b/Marlin/src/gcode/sd/M24_M25.cpp index 611ba17c55..8fb529dcaa 100644 --- a/Marlin/src/gcode/sd/M24_M25.cpp +++ b/Marlin/src/gcode/sd/M24_M25.cpp @@ -41,6 +41,10 @@ #include "../../feature/powerloss.h" #endif +#if ENABLED(DGUS_LCD_UI_MKS) + #include "../../lcd/extui/lib/dgus/DGUSDisplayDef.h" +#endif + #include "../../MarlinCore.h" // for startOrResumeJob /** @@ -48,6 +52,11 @@ */ void GcodeSuite::M24() { + #if ENABLED(DGUS_LCD_UI_MKS) + if ((print_job_timer.isPaused() || print_job_timer.isRunning()) && !parser.seen("ST")) + MKS_resume_print_move(); + #endif + #if ENABLED(POWER_LOSS_RECOVERY) if (parser.seenval('S')) card.setIndex(parser.value_long()); if (parser.seenval('T')) print_job_timer.resume(parser.value_long()); @@ -98,9 +107,9 @@ void GcodeSuite::M25() { print_job_timer.pause(); - #if DISABLED(DWIN_CREALITY_LCD) - ui.reset_status(); - #endif + TERN_(DGUS_LCD_UI_MKS, MKS_pause_print_move()); + + IF_DISABLED(DWIN_CREALITY_LCD, ui.reset_status()); #if ENABLED(HOST_ACTION_COMMANDS) TERN_(HOST_PROMPT_SUPPORT, host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("Pause SD"), PSTR("Resume"))); diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 3e20bb90c0..c8b683ecf9 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -451,7 +451,7 @@ #endif // Aliases for LCD features -#if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) +#if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY,DGUS_LCD_UI_MKS) #define HAS_DGUS_LCD 1 #endif diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 9dc64e6bf5..b6678a4bcb 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -2324,7 +2324,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal + (DISABLED(IS_LEGACY_TFT) && ENABLED(TFT_GENERIC)) \ + (ENABLED(IS_LEGACY_TFT) && COUNT_ENABLED(TFT_320x240, TFT_320x240_SPI, TFT_480x320, TFT_480x320_SPI)) \ + COUNT_ENABLED(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_TFT35) \ - + COUNT_ENABLED(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) \ + + COUNT_ENABLED(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY,DGUS_LCD_UI_MKS) \ + COUNT_ENABLED(ENDER2_STOCKDISPLAY, CR10_STOCKDISPLAY, DWIN_CREALITY_LCD) \ + COUNT_ENABLED(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1) \ + COUNT_ENABLED(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004) \ diff --git a/Marlin/src/lcd/extui/dgus_lcd.cpp b/Marlin/src/lcd/extui/dgus_lcd.cpp index 9fcb6c8d13..9e6ca1b64c 100644 --- a/Marlin/src/lcd/extui/dgus_lcd.cpp +++ b/Marlin/src/lcd/extui/dgus_lcd.cpp @@ -21,9 +21,7 @@ */ /** - * dgus_lcd.cpp - * - * DGUS implementation for Marlin by coldtobi, Feb-May 2019 + * lcd/extui/dgus_lcd.cpp */ #include "../../inc/MarlinConfigPre.h" @@ -125,11 +123,10 @@ namespace ExtUI { #if ENABLED(POWER_LOSS_RECOVERY) void onPowerLossResume() { // Called on resume from power-loss - ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POWER_LOSS); + IF_DISABLED(DGUS_LCD_UI_MKS, ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POWER_LOSS)); } #endif - #if HAS_PID_HEATING void onPidTuning(const result_t rst) { // Called for temperature PID tuning result diff --git a/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.cpp b/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.cpp index c7cd76733f..702c5cc47e 100644 --- a/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.cpp +++ b/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.cpp @@ -20,14 +20,12 @@ * */ -/* DGUS implementation written by coldtobi in 2019 for Marlin */ - #include "../../../../inc/MarlinConfigPre.h" #if HAS_DGUS_LCD #if HOTENDS > 2 - #error "More than 2 hotends not implemented on the Display UI design." + #warning "More than 2 hotends not implemented on DGUS Display UI." #endif #include "../../ui_api.h" @@ -46,6 +44,8 @@ #include "DGUSVPVariable.h" #include "DGUSDisplayDef.h" +DGUSDisplay dgusdisplay; + // Preamble... 2 Bytes, usually 0x5A 0xA5, but configurable constexpr uint8_t DGUS_HEADER1 = 0x5A; constexpr uint8_t DGUS_HEADER2 = 0xA5; @@ -62,8 +62,10 @@ void DGUSDisplay::InitDisplay() { #define LCD_BAUDRATE 115200 #endif LCD_SERIAL.begin(LCD_BAUDRATE); - if (TERN1(POWER_LOSS_RECOVERY, !recovery.valid())) - RequestScreen(TERN(SHOW_BOOTSCREEN, DGUSLCD_SCREEN_BOOT, DGUSLCD_SCREEN_MAIN)); + #if BOTH(DGUS_LCD_UI_MKS, POWER_LOSS_RECOVERY) + if (!recovery.valid()) delay(LOGO_TIME_DELAY); + #endif + RequestScreen(TERN(SHOW_BOOTSCREEN, DGUSLCD_SCREEN_BOOT, DGUSLCD_SCREEN_MAIN)); } void DGUSDisplay::WriteVariable(uint16_t adr, const void* values, uint8_t valueslen, bool isstr) { @@ -82,12 +84,12 @@ void DGUSDisplay::WriteVariable(uint16_t adr, const void* values, uint8_t values } void DGUSDisplay::WriteVariable(uint16_t adr, uint16_t value) { - value = (value & 0xffU) << 8U | (value >> 8U); + value = (value & 0xFFU) << 8U | (value >> 8U); WriteVariable(adr, static_cast(&value), sizeof(uint16_t)); } void DGUSDisplay::WriteVariable(uint16_t adr, int16_t value) { - value = (value & 0xffU) << 8U | (value >> 8U); + value = (value & 0xFFU) << 8U | (value >> 8U); WriteVariable(adr, static_cast(&value), sizeof(uint16_t)); } @@ -99,15 +101,21 @@ void DGUSDisplay::WriteVariable(uint16_t adr, int8_t value) { WriteVariable(adr, static_cast(&value), sizeof(int8_t)); } +#if ENABLED(DGUS_LCD_UI_MKS) + void DGUSDisplay::MKS_WriteVariable(uint16_t adr, uint8_t value) { + WriteVariable(adr, static_cast(&value), sizeof(uint8_t)); + } +#endif + void DGUSDisplay::WriteVariable(uint16_t adr, long value) { - union { long l; char lb[4]; } endian; - char tmp[4]; - endian.l = value; - tmp[0] = endian.lb[3]; - tmp[1] = endian.lb[2]; - tmp[2] = endian.lb[1]; - tmp[3] = endian.lb[0]; - WriteVariable(adr, static_cast(&tmp), sizeof(long)); + union { long l; char lb[4]; } endian; + char tmp[4]; + endian.l = value; + tmp[0] = endian.lb[3]; + tmp[1] = endian.lb[2]; + tmp[2] = endian.lb[1]; + tmp[3] = endian.lb[0]; + WriteVariable(adr, static_cast(&tmp), sizeof(long)); } void DGUSDisplay::WriteVariablePGM(uint16_t adr, const void* values, uint8_t valueslen, bool isstr) { diff --git a/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.h b/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.h index 88c119566c..6e0ee3053f 100644 --- a/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.h +++ b/Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.h @@ -21,7 +21,9 @@ */ #pragma once -/* DGUS implementation written by coldtobi in 2019 for Marlin */ +/** + * lcd/extui/lib/dgus/DGUSDisplay.h + */ #include "../../../../inc/MarlinConfigPre.h" @@ -34,6 +36,7 @@ enum DGUSLCD_Screens : uint8_t; +//#define DEBUG_DGUSLCD #define DEBUG_OUT ENABLED(DEBUG_DGUSLCD) #include "../../../../core/debug_out.h" @@ -60,6 +63,8 @@ public: static void WriteVariable(uint16_t adr, uint8_t value); static void WriteVariable(uint16_t adr, int8_t value); static void WriteVariable(uint16_t adr, long value); + static void MKS_WriteVariable(uint16_t adr, uint8_t value); + // Utility functions for bridging ui_api and dbus template diff --git a/Marlin/src/lcd/extui/lib/dgus/DGUSDisplayDef.h b/Marlin/src/lcd/extui/lib/dgus/DGUSDisplayDef.h index b34a04875d..0b68943593 100644 --- a/Marlin/src/lcd/extui/lib/dgus/DGUSDisplayDef.h +++ b/Marlin/src/lcd/extui/lib/dgus/DGUSDisplayDef.h @@ -21,15 +21,16 @@ */ #pragma once -/* DGUS implementation written by coldtobi in 2019 for Marlin */ +/** + * lcd/extui/lib/dgus/DGUSDisplayDef.h + * Defines the interaction between Marlin and the display firmware + */ #include "DGUSVPVariable.h" #include -// This file defines the interaction between Marlin and the display firmware. - -// information on which screen which VP is displayed +// Information on which screen which VP is displayed. // As this is a sparse table, two arrays are needed: // one to list the VPs of one screen and one to map screens to the lists. // (Strictly this would not be necessary, but allows to only send data the display needs and reducing load on Marlin) @@ -47,6 +48,8 @@ extern const struct DGUS_VP_Variable ListOfVP[]; #if ENABLED(DGUS_LCD_UI_ORIGIN) #include "origin/DGUSDisplayDef.h" +#elif ENABLED(DGUS_LCD_UI_MKS) + #include "mks/DGUSDisplayDef.h" #elif ENABLED(DGUS_LCD_UI_FYSETC) #include "fysetc/DGUSDisplayDef.h" #elif ENABLED(DGUS_LCD_UI_HIPRECY) diff --git a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp index 77feacf4a9..9b0c329de2 100644 --- a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp +++ b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp @@ -25,46 +25,42 @@ #if HAS_DGUS_LCD #include "DGUSScreenHandler.h" -#include "DGUSDisplay.h" -#include "DGUSVPVariable.h" -#include "DGUSDisplayDef.h" -#include "../../ui_api.h" #include "../../../../MarlinCore.h" +#include "../../../../gcode/queue.h" +#include "../../../../libs/duration_t.h" +#include "../../../../module/settings.h" #include "../../../../module/temperature.h" #include "../../../../module/motion.h" -#include "../../../../gcode/queue.h" #include "../../../../module/planner.h" -#include "../../../../sd/cardreader.h" -#include "../../../../libs/duration_t.h" #include "../../../../module/printcounter.h" +#include "../../../../sd/cardreader.h" #if ENABLED(POWER_LOSS_RECOVERY) #include "../../../../feature/powerloss.h" #endif +DGUSScreenHandler ScreenHandler; + uint16_t DGUSScreenHandler::ConfirmVP; -#if ENABLED(SDSUPPORT) - int16_t DGUSScreenHandler::top_file = 0; - int16_t DGUSScreenHandler::file_to_print = 0; - static ExtUI::FileList filelist; -#endif - -void (*DGUSScreenHandler::confirm_action_cb)() = nullptr; - -//DGUSScreenHandler ScreenHandler; - DGUSLCD_Screens DGUSScreenHandler::current_screen; DGUSLCD_Screens DGUSScreenHandler::past_screens[NUM_PAST_SCREENS]; uint8_t DGUSScreenHandler::update_ptr; uint16_t DGUSScreenHandler::skipVP; bool DGUSScreenHandler::ScreenComplete; -//DGUSDisplay dgusdisplay; +void (*DGUSScreenHandler::confirm_action_cb)() = nullptr; -// endianness swap -uint16_t swap16(const uint16_t value) { return (value & 0xffU) << 8U | (value >> 8U); } +#if ENABLED(SDSUPPORT) + int16_t DGUSScreenHandler::top_file = 0, + DGUSScreenHandler::file_to_print = 0; + static ExtUI::FileList filelist; +#endif + +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + filament_data_t filament_data; +#endif void DGUSScreenHandler::sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool l4inflash) { DGUS_VP_Variable ramcopy; @@ -87,14 +83,12 @@ void DGUSScreenHandler::sendinfoscreen(const char* line1, const char* line2, con } void DGUSScreenHandler::HandleUserConfirmationPopUp(uint16_t VP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1, bool l2, bool l3, bool l4) { - if (current_screen == DGUSLCD_SCREEN_CONFIRM) { - // Already showing a pop up, so we need to cancel that first. + if (current_screen == DGUSLCD_SCREEN_CONFIRM) // Already showing a pop up, so we need to cancel that first. PopToOldScreen(); - } ConfirmVP = VP; sendinfoscreen(line1, line2, line3, line4, l1, l2, l3, l4); - ScreenHandler.GotoScreen(DGUSLCD_SCREEN_CONFIRM); + GotoScreen(DGUSLCD_SCREEN_CONFIRM); } void DGUSScreenHandler::setstatusmessage(const char *msg) { @@ -130,7 +124,7 @@ void DGUSScreenHandler::DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var) { if (var.memadr) { //DEBUG_ECHOPAIR(" DGUS_LCD_SendWordValueToDisplay ", var.VP); //DEBUG_ECHOLNPAIR(" data ", *(uint16_t *)var.memadr); - uint16_t tmp = *(uint8_t *) var.memadr +1 ; // +1 -> avoid rounding issues for the display. + uint16_t tmp = *(uint8_t *) var.memadr + 1; // +1 -> avoid rounding issues for the display. tmp = map(tmp, 0, 255, 0, 100); dgusdisplay.WriteVariable(var.VP, tmp); } @@ -157,7 +151,9 @@ void DGUSScreenHandler::DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var) { void DGUSScreenHandler::DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr) { if (var.memadr) { uint16_t value = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("FAN value get:", value); *(uint8_t*)var.memadr = map(constrain(value, 0, 100), 0, 100, 0, 255); + DEBUG_ECHOLNPAIR("FAN value change:", *(uint8_t*)var.memadr); } } @@ -234,6 +230,7 @@ void DGUSScreenHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var) { // Send fan status value to the display. #if HAS_FAN + void DGUSScreenHandler::DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var) { if (var.memadr) { DEBUG_ECHOPAIR(" DGUSLCD_SendFanStatusToDisplay ", var.VP); @@ -243,6 +240,7 @@ void DGUSScreenHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var) { dgusdisplay.WriteVariable(var.VP, data_to_send); } } + #endif // Send heater status value to the display. @@ -257,6 +255,7 @@ void DGUSScreenHandler::DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var) } #if ENABLED(DGUS_UI_WAITING) + void DGUSScreenHandler::DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var) { // In FYSETC UI design there are 10 statuses to loop static uint16_t period = 0; @@ -270,6 +269,7 @@ void DGUSScreenHandler::DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var) period = 0; } } + #endif #if ENABLED(SDSUPPORT) @@ -319,7 +319,7 @@ void DGUSScreenHandler::DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var) DEBUG_ECHOPAIR("new topfile adjusted:", top_file); } else if (!filelist.isAtRootDir()) { - filelist.upDir(); + IF_DISABLED(DGUS_LCD_UI_MKS, filelist.upDir()); top_file = 0; ForceCompleteUpdate(); } @@ -327,54 +327,6 @@ void DGUSScreenHandler::DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var) if (old_top != top_file) ForceCompleteUpdate(); } - void DGUSScreenHandler::DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr) { - uint16_t touched_nr = (int16_t)swap16(*(uint16_t*)val_ptr) + top_file; - if (touched_nr > filelist.count()) return; - if (!filelist.seek(touched_nr)) return; - if (filelist.isDir()) { - filelist.changeDir(filelist.filename()); - top_file = 0; - ForceCompleteUpdate(); - return; - } - - #if ENABLED(DGUS_PRINT_FILENAME) - // Send print filename - dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), VP_SD_FileName_LEN, true); - #endif - - // Setup Confirmation screen - file_to_print = touched_nr; - HandleUserConfirmationPopUp(VP_SD_FileSelectConfirm, nullptr, PSTR("Print file"), filelist.filename(), PSTR("from SD Card?"), true, true, false, true); - } - - void DGUSScreenHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) { - if (!filelist.seek(file_to_print)) return; - ExtUI::printFile(filelist.shortFilename()); - ScreenHandler.GotoScreen( - #if ENABLED(DGUS_LCD_UI_ORIGIN) - DGUSLCD_SCREEN_STATUS - #else - DGUSLCD_SCREEN_SDPRINTMANIPULATION - #endif - ); - } - - void DGUSScreenHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) { - if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes. - switch (swap16(*(uint16_t*)val_ptr)) { - case 0: // Resume - if (ExtUI::isPrintingFromMediaPaused()) ExtUI::resumePrint(); - break; - case 1: // Pause - if (!ExtUI::isPrintingFromMediaPaused()) ExtUI::pausePrint(); - break; - case 2: // Abort - ScreenHandler.HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true); - break; - } - } - void DGUSScreenHandler::DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr) { ExtUI::stopPrint(); GotoScreen(DGUSLCD_SCREEN_MAIN); @@ -385,36 +337,11 @@ void DGUSScreenHandler::DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var) GotoScreen(DGUSLCD_SCREEN_SDPRINTTUNE); } - void DGUSScreenHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) { - uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN; - if (target_line > DGUS_SD_FILESPERSCREEN) return; - char tmpfilename[VP_SD_FileName_LEN + 1] = ""; - var.memadr = (void*)tmpfilename; - if (filelist.seek(top_file + target_line)) - snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s%c"), filelist.filename(), filelist.isDir() ? '/' : 0); - DGUSLCD_SendStringToDisplay(var); - } - - void DGUSScreenHandler::SDCardInserted() { - top_file = 0; - filelist.refresh(); - auto cs = ScreenHandler.getCurrentScreen(); - if (cs == DGUSLCD_SCREEN_MAIN || cs == DGUSLCD_SCREEN_STATUS) - ScreenHandler.GotoScreen(DGUSLCD_SCREEN_SDFILELIST); - } - - void DGUSScreenHandler::SDCardRemoved() { - if (current_screen == DGUSLCD_SCREEN_SDFILELIST - || (current_screen == DGUSLCD_SCREEN_CONFIRM && (ConfirmVP == VP_SD_AbortPrintConfirmed || ConfirmVP == VP_SD_FileSelectConfirm)) - || current_screen == DGUSLCD_SCREEN_SDPRINTMANIPULATION - ) ScreenHandler.GotoScreen(DGUSLCD_SCREEN_MAIN); - } - void DGUSScreenHandler::SDCardError() { DGUSScreenHandler::SDCardRemoved(); - ScreenHandler.sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("SD card error"), nullptr, true, true, true, true); - ScreenHandler.SetupConfirmAction(nullptr); - ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP); + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("SD card error"), nullptr, true, true, true, true); + SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); } #endif // SDSUPPORT @@ -428,7 +355,7 @@ void DGUSScreenHandler::ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr) const uint16_t* DGUSLCD_FindScreenVPMapList(uint8_t screen) { const uint16_t *ret; const struct VPMapping *map = VPMap; - while (ret = (uint16_t*) pgm_read_ptr(&(map->VPList))) { + while ((ret = (uint16_t*) pgm_read_ptr(&(map->VPList)))) { if (pgm_read_byte(&(map->screen)) == screen) return ret; map++; } @@ -455,31 +382,9 @@ void DGUSScreenHandler::ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ } } -void DGUSScreenHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr) { - uint8_t *tmp = (uint8_t*)val_ptr; - - // The keycode in target is coded as , so 0x0100A means - // from screen 1 (main) to 10 (temperature). DGUSLCD_SCREEN_POPUP is special, - // meaning "return to previous screen" - DGUSLCD_Screens target = (DGUSLCD_Screens)tmp[1]; - - if (target == DGUSLCD_SCREEN_POPUP) { - // special handling for popup is to return to previous menu - if (current_screen == DGUSLCD_SCREEN_POPUP && confirm_action_cb) confirm_action_cb(); - PopToOldScreen(); - return; - } - - UpdateNewScreen(target); - - #ifdef DEBUG_DGUSLCD - if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", target); - #endif -} - void DGUSScreenHandler::HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr) { thermalManager.disable_all_heaters(); - ScreenHandler.ForceCompleteUpdate(); // hint to send all data. + ForceCompleteUpdate(); // hint to send all data. } void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr) { @@ -498,7 +403,7 @@ void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *va case VP_T_E1_Set: thermalManager.setTargetHotend(newvalue, 1); acceptedvalue = thermalManager.temp_hotend[1].target; - break; + break; #endif #if HAS_HEATED_BED case VP_T_Bed_Set: @@ -510,7 +415,7 @@ void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *va // reply to display the new value to update the view if the new value was rejected by the Thermal Manager. if (newvalue != acceptedvalue && var.send_to_display_handler) var.send_to_display_handler(var); - ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel } void DGUSScreenHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr) { @@ -528,7 +433,7 @@ void DGUSScreenHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_p } planner.set_flow(target_extruder, newvalue); - ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel #else UNUSED(var); UNUSED(val_ptr); #endif @@ -563,97 +468,6 @@ void DGUSScreenHandler::HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr } #endif -void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) { - DEBUG_ECHOLNPGM("HandleManualMove"); - - int16_t movevalue = swap16(*(uint16_t*)val_ptr); - #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) - if (movevalue) { - const uint16_t choice = *(uint16_t*)var.memadr; - movevalue = movevalue < 0 ? -choice : choice; - } - #endif - char axiscode; - unsigned int speed = 1500; //FIXME: get default feedrate for manual moves, dont hardcode. - - switch (var.VP) { - default: return; - - case VP_MOVE_X: - axiscode = 'X'; - if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove; - break; - - case VP_MOVE_Y: - axiscode = 'Y'; - if (!ExtUI::canMove(ExtUI::axis_t::Y)) goto cannotmove; - break; - - case VP_MOVE_Z: - axiscode = 'Z'; - speed = 300; // default to 5mm/s - if (!ExtUI::canMove(ExtUI::axis_t::Z)) goto cannotmove; - break; - - case VP_HOME_ALL: // only used for homing - axiscode = '\0'; - movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing. - break; - } - - if (!movevalue) { - // homing - DEBUG_ECHOPAIR(" homing ", axiscode); - char buf[6] = "G28 X"; - buf[4] = axiscode; - //DEBUG_ECHOPAIR(" ", buf); - queue.enqueue_one_now(buf); - //DEBUG_ECHOLNPGM(" ✓"); - ScreenHandler.ForceCompleteUpdate(); - return; - } - else { - //movement - DEBUG_ECHOPAIR(" move ", axiscode); - bool old_relative_mode = relative_mode; - if (!relative_mode) { - //DEBUG_ECHOPGM(" G91"); - queue.enqueue_now_P(PSTR("G91")); - //DEBUG_ECHOPGM(" ✓ "); - } - char buf[32]; // G1 X9999.99 F12345 - unsigned int backup_speed = MMS_TO_MMM(feedrate_mm_s); - char sign[]="\0"; - int16_t value = movevalue / 100; - if (movevalue < 0) { value = -value; sign[0] = '-'; } - int16_t fraction = ABS(movevalue) % 100; - snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed); - //DEBUG_ECHOPAIR(" ", buf); - queue.enqueue_one_now(buf); - //DEBUG_ECHOLNPGM(" ✓ "); - if (backup_speed != speed) { - snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed); - queue.enqueue_one_now(buf); - //DEBUG_ECHOPAIR(" ", buf); - } - //while (!enqueue_and_echo_command(buf)) idle(); - //DEBUG_ECHOLNPGM(" ✓ "); - if (!old_relative_mode) { - //DEBUG_ECHOPGM("G90"); - queue.enqueue_now_P(PSTR("G90")); - //DEBUG_ECHOPGM(" ✓ "); - } - } - - ScreenHandler.ForceCompleteUpdate(); - DEBUG_ECHOLNPGM("manmv done."); - return; - - cannotmove: - DEBUG_ECHOLNPAIR(" cannot move ", axiscode); - return; -} - void DGUSScreenHandler::HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr) { DEBUG_ECHOLNPGM("HandleMotorLockUnlock"); @@ -665,22 +479,6 @@ void DGUSScreenHandler::HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_p queue.enqueue_one_now(buf); } -#if ENABLED(POWER_LOSS_RECOVERY) - - void DGUSScreenHandler::HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr) { - uint16_t value = swap16(*(uint16_t*)val_ptr); - if (value) { - queue.inject_P(PSTR("M1000")); - ScreenHandler.GotoScreen(DGUSLCD_SCREEN_SDPRINTMANIPULATION); - } - else { - recovery.cancel(); - ScreenHandler.GotoScreen(DGUSLCD_SCREEN_STATUS); - } - } - -#endif - void DGUSScreenHandler::HandleSettings(DGUS_VP_Variable &var, void *val_ptr) { DEBUG_ECHOLNPGM("HandleSettings"); uint16_t value = swap16(*(uint16_t*)val_ptr); @@ -688,10 +486,11 @@ void DGUSScreenHandler::HandleSettings(DGUS_VP_Variable &var, void *val_ptr) { default: break; case 1: TERN_(PRINTCOUNTER, print_job_timer.initStats()); - queue.inject_P(PSTR("M502\nM500")); + settings.reset(); + settings.save(); break; - case 2: queue.inject_P(PSTR("M501")); break; - case 3: queue.inject_P(PSTR("M500")); break; + case 2: settings.load(); break; + case 3: settings.save(); break; } } @@ -700,7 +499,7 @@ void DGUSScreenHandler::HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ uint16_t value_raw = swap16(*(uint16_t*)val_ptr); DEBUG_ECHOLNPAIR("value_raw:", value_raw); - float value = (float)value_raw/10; + float value = (float)value_raw / 10; ExtUI::axis_t axis; switch (var.VP) { case VP_X_STEP_PER_MM: axis = ExtUI::axis_t::X; break; @@ -711,7 +510,7 @@ void DGUSScreenHandler::HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ DEBUG_ECHOLNPAIR_F("value:", value); ExtUI::setAxisSteps_per_mm(value, axis); DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(axis)); - ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel return; } @@ -720,56 +519,24 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo uint16_t value_raw = swap16(*(uint16_t*)val_ptr); DEBUG_ECHOLNPAIR("value_raw:", value_raw); - float value = (float)value_raw/10; + float value = (float)value_raw / 10; ExtUI::extruder_t extruder; switch (var.VP) { default: return; - #if HOTENDS >= 1 - case VP_E0_STEP_PER_MM: extruder = ExtUI::extruder_t::E0; break; - #endif - #if HOTENDS >= 2 - case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break; - #endif + #if HOTENDS >= 1 + case VP_E0_STEP_PER_MM: extruder = ExtUI::extruder_t::E0; break; + #endif + #if HOTENDS >= 2 + case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break; + #endif } DEBUG_ECHOLNPAIR_F("value:", value); - ExtUI::setAxisSteps_per_mm(value,extruder); + ExtUI::setAxisSteps_per_mm(value, extruder); DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(extruder)); - ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel - return; + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel } #if HAS_PID_HEATING - void DGUSScreenHandler::HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr) { - uint16_t rawvalue = swap16(*(uint16_t*)val_ptr); - DEBUG_ECHOLNPAIR("V1:", rawvalue); - float value = (float)rawvalue / 10; - DEBUG_ECHOLNPAIR("V2:", value); - float newvalue = 0; - - switch (var.VP) { - default: return; - #if HOTENDS >= 1 - case VP_E0_PID_P: newvalue = value; break; - case VP_E0_PID_I: newvalue = scalePID_i(value); break; - case VP_E0_PID_D: newvalue = scalePID_d(value); break; - #endif - #if HOTENDS >= 2 - case VP_E1_PID_P: newvalue = value; break; - case VP_E1_PID_I: newvalue = scalePID_i(value); break; - case VP_E1_PID_D: newvalue = scalePID_d(value); break; - #endif - #if HAS_HEATED_BED - case VP_BED_PID_P: newvalue = value; break; - case VP_BED_PID_I: newvalue = scalePID_i(value); break; - case VP_BED_PID_D: newvalue = scalePID_d(value); break; - #endif - } - - DEBUG_ECHOLNPAIR_F("V3:", newvalue); - *(float *)var.memadr = newvalue; - ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel - } - void DGUSScreenHandler::HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr) { DEBUG_ECHOLNPGM("HandlePIDAutotune"); @@ -777,23 +544,23 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo switch (var.VP) { default: break; - #if ENABLED(PIDTEMP) - #if HOTENDS >= 1 - case VP_PID_AUTOTUNE_E0: // Autotune Extruder 0 - sprintf(buf, "M303 E%d C5 S210 U1", ExtUI::extruder_t::E0); + #if ENABLED(PIDTEMP) + #if HOTENDS >= 1 + case VP_PID_AUTOTUNE_E0: // Autotune Extruder 0 + sprintf_P(buf, PSTR("M303 E%d C5 S210 U1"), ExtUI::extruder_t::E0); + break; + #endif + #if HOTENDS >= 2 + case VP_PID_AUTOTUNE_E1: + sprintf_P(buf, PSTR("M303 E%d C5 S210 U1"), ExtUI::extruder_t::E1); + break; + #endif + #endif + #if ENABLED(PIDTEMPBED) + case VP_PID_AUTOTUNE_BED: + sprintf_P(buf, PSTR("M303 E-1 C5 S70 U1")); break; #endif - #if HOTENDS >= 2 - case VP_PID_AUTOTUNE_E1: - sprintf(buf, "M303 E%d C5 S210 U1", ExtUI::extruder_t::E1); - break; - #endif - #endif - #if ENABLED(PIDTEMPBED) - case VP_PID_AUTOTUNE_BED: - sprintf(buf, "M303 E-1 C5 S70 U1"); - break; - #endif } if (buf[0]) queue.enqueue_one_now(buf); @@ -803,7 +570,7 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo GotoScreen(DGUSLCD_SCREEN_WAITING); #endif } -#endif +#endif // HAS_PID_HEATING #if HAS_BED_PROBE void DGUSScreenHandler::HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr) { @@ -811,19 +578,7 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo const float offset = float(int16_t(swap16(*(uint16_t*)val_ptr))) / 100.0f; ExtUI::setZOffset_mm(offset); - ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel - return; - } -#endif - -#if ENABLED(BABYSTEPPING) - void DGUSScreenHandler::HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr) { - DEBUG_ECHOLNPGM("HandleLiveAdjustZ"); - - int16_t flag = swap16(*(uint16_t*)val_ptr); - int16_t steps = flag ? -20 : 20; - ExtUI::smartAdjustAxis_steps(steps, ExtUI::axis_t::Z, true); - ScreenHandler.ForceCompleteUpdate(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel return; } #endif @@ -849,8 +604,8 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr #if HOTENDS >= 3 case VP_E2_CONTROL: #endif - preheat_temp = PREHEAT_1_TEMP_HOTEND; - break; + preheat_temp = PREHEAT_1_TEMP_HOTEND; + break; case VP_BED_CONTROL: preheat_temp = PREHEAT_1_TEMP_BED; @@ -900,149 +655,49 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr switch (var.VP) { default: return; - #if HOTENDS >= 1 - case VP_E0_BED_PREHEAT: - thermalManager.setTargetHotend(e_temp, 0); - TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(bed_temp)); - break; - #endif - #if HOTENDS >= 2 - case VP_E1_BED_PREHEAT: - thermalManager.setTargetHotend(e_temp, 1); - TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(bed_temp)); - break; - #endif + #if HOTENDS >= 1 + case VP_E0_BED_PREHEAT: + thermalManager.setTargetHotend(e_temp, 0); + TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(bed_temp)); + break; + #endif + #if HOTENDS >= 2 + case VP_E1_BED_PREHEAT: + thermalManager.setTargetHotend(e_temp, 1); + TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(bed_temp)); + break; + #endif } // Go to the preheat screen to show the heating progress GotoScreen(DGUSLCD_SCREEN_PREHEAT); } -#endif +#endif // DGUS_PREHEAT_UI -#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) +#if ENABLED(POWER_LOSS_RECOVERY) - typedef struct { - ExtUI::extruder_t extruder; // which extruder to operate - uint8_t action; // load or unload - bool heated; // heating done ? - float purge_length; // the length to extrude before unload, prevent filament jam - } filament_data_t; - - static filament_data_t filament_data; - - void DGUSScreenHandler::HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr) { - DEBUG_ECHOLNPGM("HandleFilamentOption"); - - uint8_t e_temp = 0; - filament_data.heated = false; - uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); - if (preheat_option <= 8) // Load filament type - filament_data.action = 1; - else if (preheat_option >= 10) { // Unload filament type - preheat_option -= 10; - filament_data.action = 2; - filament_data.purge_length = DGUS_FILAMENT_PURGE_LENGTH; + void DGUSScreenHandler::HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t value = swap16(*(uint16_t*)val_ptr); + if (value) { + queue.inject_P(PSTR("M1000")); + dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), 32, true); + GotoScreen(PLR_SCREEN_RECOVER); } - else // Cancel filament operation - filament_data.action = 0; - - switch (preheat_option) { - case 0: // Load PLA - #ifdef PREHEAT_1_TEMP_HOTEND - e_temp = PREHEAT_1_TEMP_HOTEND; - #endif - break; - case 1: // Load ABS - TERN_(PREHEAT_2_TEMP_HOTEND, e_temp = PREHEAT_2_TEMP_HOTEND); - break; - case 2: // Load PET - #ifdef PREHEAT_3_TEMP_HOTEND - e_temp = PREHEAT_3_TEMP_HOTEND; - #endif - break; - case 3: // Load FLEX - #ifdef PREHEAT_4_TEMP_HOTEND - e_temp = PREHEAT_4_TEMP_HOTEND; - #endif - break; - case 9: // Cool down - default: - e_temp = 0; - break; - } - - if (filament_data.action == 0) { // Go back to utility screen - #if HOTENDS >= 1 - thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0); - #endif - #if HOTENDS >= 2 - thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1); - #endif - GotoScreen(DGUSLCD_SCREEN_UTILITY); - } - else { // Go to the preheat screen to show the heating progress - switch (var.VP) { - default: return; - #if HOTENDS >= 1 - case VP_E0_FILAMENT_LOAD_UNLOAD: - filament_data.extruder = ExtUI::extruder_t::E0; - thermalManager.setTargetHotend(e_temp, filament_data.extruder); - break; - #endif - #if HOTENDS >= 2 - case VP_E1_FILAMENT_LOAD_UNLOAD: - filament_data.extruder = ExtUI::extruder_t::E1; - thermalManager.setTargetHotend(e_temp, filament_data.extruder); - break; - #endif - } - GotoScreen(DGUSLCD_SCREEN_FILAMENT_HEATING); + else { + recovery.cancel(); + GotoScreen(PLR_SCREEN_CANCEL); } } - void DGUSScreenHandler::HandleFilamentLoadUnload(DGUS_VP_Variable &var) { - DEBUG_ECHOLNPGM("HandleFilamentLoadUnload"); - if (filament_data.action <= 0) return; - - // If we close to the target temperature, we can start load or unload the filament - if (thermalManager.hotEnoughToExtrude(filament_data.extruder) && \ - thermalManager.targetHotEnoughToExtrude(filament_data.extruder)) { - float movevalue = DGUS_FILAMENT_LOAD_LENGTH_PER_TIME; - - if (filament_data.action == 1) { // load filament - if (!filament_data.heated) { - GotoScreen(DGUSLCD_SCREEN_FILAMENT_LOADING); - filament_data.heated = true; - } - movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder)+movevalue; - } - else { // unload filament - if (!filament_data.heated) { - GotoScreen(DGUSLCD_SCREEN_FILAMENT_UNLOADING); - filament_data.heated = true; - } - // Before unloading extrude to prevent jamming - if (filament_data.purge_length >= 0) { - movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; - filament_data.purge_length -= movevalue; - } - else - movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) - movevalue; - } - ExtUI::setAxisPosition_mm(movevalue, filament_data.extruder); - } - } #endif void DGUSScreenHandler::UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup) { DEBUG_ECHOLNPAIR("SetNewScreen: ", newscreen); - if (!popup) { memmove(&past_screens[1], &past_screens[0], sizeof(past_screens) - 1); past_screens[0] = current_screen; } - current_screen = newscreen; skipVP = 0; ForceCompleteUpdate(); @@ -1062,7 +717,7 @@ void DGUSScreenHandler::UpdateScreenVPData() { if (!VPList) { DEBUG_ECHOLNPAIR(" NO SCREEN FOR: ", current_screen); ScreenComplete = true; - return; // nothing to do, likely a bug or boring screen. + return; // nothing to do, likely a bug or boring screen. } // Round-robin updating of all VPs. @@ -1076,14 +731,14 @@ void DGUSScreenHandler::UpdateScreenVPData() { update_ptr = 0; DEBUG_ECHOLNPGM(" UpdateScreenVPData done"); ScreenComplete = true; - return; // Screen completed. + return; // Screen completed. } if (VP == skipVP) { skipVP = 0; continue; } DGUS_VP_Variable rcpy; if (populate_VPVar(VP, &rcpy)) { - uint8_t expected_tx = 6 + rcpy.size; // expected overhead is 6 bytes + payload. + uint8_t expected_tx = 6 + rcpy.size; // expected overhead is 6 bytes + payload. // Send the VP to the display, but try to avoid overrunning the Tx Buffer. // But send at least one VP, to avoid getting stalled. if (rcpy.send_to_display_handler && (!sent_one || expected_tx <= dgusdisplay.GetFreeTxBuffer())) { @@ -1092,11 +747,11 @@ void DGUSScreenHandler::UpdateScreenVPData() { rcpy.send_to_display_handler(rcpy); } else { - //auto x=dgusdisplay.GetFreeTxBuffer(); + // auto x=dgusdisplay.GetFreeTxBuffer(); //DEBUG_ECHOLNPAIR(" tx almost full: ", x); //DEBUG_ECHOPAIR(" update_ptr ", update_ptr); ScreenComplete = false; - return; // please call again! + return; // please call again! } } @@ -1108,29 +763,6 @@ void DGUSScreenHandler::GotoScreen(DGUSLCD_Screens screen, bool ispopup) { UpdateNewScreen(screen, ispopup); } -bool DGUSScreenHandler::loop() { - dgusdisplay.loop(); - - const millis_t ms = millis(); - static millis_t next_event_ms = 0; - - if (!IsScreenComplete() || ELAPSED(ms, next_event_ms)) { - next_event_ms = ms + DGUS_UPDATE_INTERVAL_MS; - UpdateScreenVPData(); - } - - #if ENABLED(SHOW_BOOTSCREEN) - static bool booted = false; - if (!booted && TERN0(POWER_LOSS_RECOVERY, recovery.valid())) - booted = true; - if (!booted && ELAPSED(ms, BOOTSCREEN_TIMEOUT)) { - booted = true; - GotoScreen(DGUSLCD_SCREEN_MAIN); - } - #endif - return IsScreenComplete(); -} - void DGUSDisplay::RequestScreen(DGUSLCD_Screens screen) { DEBUG_ECHOLNPAIR("GotoScreen ", screen); const unsigned char gotoscreen[] = { 0x5A, 0x01, (unsigned char) (screen >> 8U), (unsigned char) (screen & 0xFFU) }; diff --git a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.h index df738dbfd1..21e25b3b88 100644 --- a/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.h +++ b/Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.h @@ -21,212 +21,38 @@ */ #pragma once -#include "DGUSDisplay.h" -#include "DGUSVPVariable.h" +/** + * lcd/extui/lib/dgus/DGUSScreenHandler.h + */ -#include "../../../../inc/MarlinConfig.h" +#include "../../../../inc/MarlinConfigPre.h" -enum DGUSLCD_Screens : uint8_t; +#include "../../ui_api.h" -class DGUSScreenHandler { -public: - DGUSScreenHandler() = default; +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - static bool loop(); + typedef struct { + ExtUI::extruder_t extruder; // which extruder to operate + uint8_t action; // load or unload + bool heated; // heating done ? + float purge_length; // the length to extrude before unload, prevent filament jam + } filament_data_t; - /// Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen - /// The bools specifing whether the strings are in RAM or FLASH. - static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + extern filament_data_t filament_data; - static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); +#endif - /// "M117" Message -- msg is a RAM ptr. - static void setstatusmessage(const char* msg); - /// The same for messages from Flash - static void setstatusmessagePGM(PGM_P const msg); - // Callback for VP "Display wants to change screen on idle printer" - static void ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ptr); - // Callback for VP "Screen has been changed" - static void ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr); - // Callback for VP "All Heaters Off" - static void HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr); - // Hook for "Change this temperature" - static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr); - // Hook for "Change Flowrate" - static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr); - #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) - // Hook for manual move option - static void HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr); - #endif - // Hook for manual move. - static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr); - // Hook for manual extrude. - static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr); - // Hook for motor lock and unlook - static void HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr); - #if ENABLED(POWER_LOSS_RECOVERY) - // Hook for power loss recovery. - static void HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr); - #endif - // Hook for settings - static void HandleSettings(DGUS_VP_Variable &var, void *val_ptr); - static void HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr); - static void HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr); - #if HAS_PID_HEATING - // Hook for "Change this temperature PID para" - static void HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr); - // Hook for PID autotune - static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr); - #endif - #if HAS_BED_PROBE - // Hook for "Change probe offset z" - static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr); - #endif - #if ENABLED(BABYSTEPPING) - // Hook for live z adjust action - static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr); - #endif - #if HAS_FAN - // Hook for fan control - static void HandleFanControl(DGUS_VP_Variable &var, void *val_ptr); - #endif - // Hook for heater control - static void HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr); - #if ENABLED(DGUS_PREHEAT_UI) - // Hook for preheat - static void HandlePreheat(DGUS_VP_Variable &var, void *val_ptr); - #endif - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - // Hook for filament load and unload filament option - static void HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr); - // Hook for filament load and unload - static void HandleFilamentLoadUnload(DGUS_VP_Variable &var); - #endif +// endianness swap +inline uint16_t swap16(const uint16_t value) { return (value & 0xFFU) << 8U | (value >> 8U); } - #if ENABLED(SDSUPPORT) - // Callback for VP "Display wants to change screen when there is a SD card" - static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr); - /// Scroll buttons on the file listing screen. - static void DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable &var, void *val_ptr); - /// File touched. - static void DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr); - /// start print after confirmation received. - static void DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr); - /// User hit the pause, resume or abort button. - static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr); - /// User confirmed the abort action - static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr); - /// User hit the tune button - static void DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr); - /// Send a single filename to the display. - static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var); - /// Marlin informed us that a new SD has been inserted. - static void SDCardInserted(); - /// Marlin informed us that the SD Card has been removed(). - static void SDCardRemoved(); - /// Marlin informed us about a bad SD Card. - static void SDCardError(); - #endif - - // OK Button the Confirm screen. - static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr); - - // Update data after went to new screen (by display or by GotoScreen) - // remember: store the last-displayed screen, so it can get returned to. - // (e.g for pop up messages) - static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false); - - // Recall the remembered screen. - static void PopToOldScreen(); - - // Make the display show the screen and update all VPs in it. - static void GotoScreen(DGUSLCD_Screens screen, bool ispopup = false); - - static void UpdateScreenVPData(); - - // Helpers to convert and transfer data to the display. - static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var); - static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var); - static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var); - static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var); - static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var); - static void DGUSLCD_SendPrintProgressToDisplay(DGUS_VP_Variable &var); - static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var); - #if ENABLED(PRINTCOUNTER) - static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var); - static void DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var); - #endif - #if HAS_FAN - static void DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var); - #endif - static void DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var); - #if ENABLED(DGUS_UI_WAITING) - static void DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var); - #endif - - /// Send a value from 0..100 to a variable with a range from 0..255 - static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr); - - template - static void DGUSLCD_SetValueDirectly(DGUS_VP_Variable &var, void *val_ptr) { - if (!var.memadr) return; - union { unsigned char tmp[sizeof(T)]; T t; } x; - unsigned char *ptr = (unsigned char*)val_ptr; - LOOP_L_N(i, sizeof(T)) x.tmp[i] = ptr[sizeof(T) - i - 1]; - *(T*)var.memadr = x.t; - } - - /// Send a float value to the display. - /// Display will get a 4-byte integer scaled to the number of digits: - /// Tell the display the number of digits and it cheats by displaying a dot between... - template - static void DGUSLCD_SendFloatAsLongValueToDisplay(DGUS_VP_Variable &var) { - if (var.memadr) { - float f = *(float *)var.memadr; - f *= cpow(10, decimals); - dgusdisplay.WriteVariable(var.VP, (long)f); - } - } - - /// Send a float value to the display. - /// Display will get a 2-byte integer scaled to the number of digits: - /// Tell the display the number of digits and it cheats by displaying a dot between... - template - static void DGUSLCD_SendFloatAsIntValueToDisplay(DGUS_VP_Variable &var) { - if (var.memadr) { - float f = *(float *)var.memadr; - DEBUG_ECHOLNPAIR_F(" >> ", f, 6); - f *= cpow(10, decimals); - dgusdisplay.WriteVariable(var.VP, (int16_t)f); - } - } - - /// Force an update of all VP on the current screen. - static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; } - /// Has all VPs sent to the screen - static inline bool IsScreenComplete() { return ScreenComplete; } - - static inline DGUSLCD_Screens getCurrentScreen() { return current_screen; } - - static inline void SetupConfirmAction( void (*f)()) { confirm_action_cb = f; } - -private: - static DGUSLCD_Screens current_screen; ///< currently on screen - static constexpr uint8_t NUM_PAST_SCREENS = 4; - static DGUSLCD_Screens past_screens[NUM_PAST_SCREENS]; ///< LIFO with past screens for the "back" button. - - static uint8_t update_ptr; ///< Last sent entry in the VPList for the actual screen. - static uint16_t skipVP; ///< When updating the screen data, skip this one, because the user is interacting with it. - static bool ScreenComplete; ///< All VPs sent to screen? - - static uint16_t ConfirmVP; ///< context for confirm screen (VP that will be emulated-sent on "OK"). - - #if ENABLED(SDSUPPORT) - static int16_t top_file; ///< file on top of file chooser - static int16_t file_to_print; ///< touched file to be confirmed - #endif - - static void (*confirm_action_cb)(); -}; +#if ENABLED(DGUS_LCD_UI_ORIGIN) + #include "origin/DGUSScreenHandler.h" +#elif ENABLED(DGUS_LCD_UI_MKS) + #include "mks/DGUSScreenHandler.h" +#elif ENABLED(DGUS_LCD_UI_FYSETC) + #include "fysetc/DGUSScreenHandler.h" +#elif ENABLED(DGUS_LCD_UI_HIPRECY) + #include "hiprecy/DGUSScreenHandler.h" +#endif extern DGUSScreenHandler ScreenHandler; diff --git a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.cpp new file mode 100644 index 0000000000..c43243b39d --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.cpp @@ -0,0 +1,418 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_FYSETC) + +#include "../DGUSScreenHandler.h" + +#include "../../../../../MarlinCore.h" +#include "../../../../../gcode/queue.h" +#include "../../../../../libs/duration_t.h" +#include "../../../../../module/settings.h" +#include "../../../../../module/temperature.h" +#include "../../../../../module/motion.h" +#include "../../../../../module/planner.h" +#include "../../../../../module/printcounter.h" +#include "../../../../../sd/cardreader.h" + +#if ENABLED(POWER_LOSS_RECOVERY) + #include "../../../../feature/powerloss.h" +#endif + +#if ENABLED(SDSUPPORT) + + void DGUSScreenHandler::DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t touched_nr = (int16_t)swap16(*(uint16_t*)val_ptr) + top_file; + if (touched_nr > filelist.count()) return; + if (!filelist.seek(touched_nr)) return; + + if (filelist.isDir()) { + filelist.changeDir(filelist.filename()); + top_file = 0; + ForceCompleteUpdate(); + return; + } + + #if ENABLED(DGUS_PRINT_FILENAME) + // Send print filename + dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), VP_SD_FileName_LEN, true); + #endif + + // Setup Confirmation screen + file_to_print = touched_nr; + + HandleUserConfirmationPopUp(VP_SD_FileSelectConfirm, nullptr, PSTR("Print file"), filelist.filename(), PSTR("from SD Card?"), true, true, false, true); + } + + void DGUSScreenHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) { + if (!filelist.seek(file_to_print)) return; + ExtUI::printFile(filelist.shortFilename()); + GotoScreen(DGUSLCD_SCREEN_SDPRINTMANIPULATION); + } + + void DGUSScreenHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) { + + if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes. + switch (swap16(*(uint16_t*)val_ptr)) { + case 0: { // Resume + if (ExtUI::isPrintingFromMediaPaused()) { + ExtUI::resumePrint(); + } + } break; + + case 1: // Pause + + GotoScreen(MKSLCD_SCREEN_PAUSE); + if (!ExtUI::isPrintingFromMediaPaused()) { + ExtUI::pausePrint(); + //ExtUI::mks_pausePrint(); + } + break; + case 2: // Abort + HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true); + break; + } + } + + void DGUSScreenHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) { + uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN; + if (target_line > DGUS_SD_FILESPERSCREEN) return; + char tmpfilename[VP_SD_FileName_LEN + 1] = ""; + var.memadr = (void*)tmpfilename; + + if (filelist.seek(top_file + target_line)) { + snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s%c"), filelist.filename(), filelist.isDir() ? '/' : 0); // snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s"), filelist.filename()); + } + DGUSLCD_SendStringToDisplay(var); + } + + void DGUSScreenHandler::SDCardInserted() { + top_file = 0; + filelist.refresh(); + auto cs = getCurrentScreen(); + if (cs == DGUSLCD_SCREEN_MAIN || cs == DGUSLCD_SCREEN_STATUS) + GotoScreen(DGUSLCD_SCREEN_SDFILELIST); + } + + void DGUSScreenHandler::SDCardRemoved() { + if (current_screen == DGUSLCD_SCREEN_SDFILELIST + || (current_screen == DGUSLCD_SCREEN_CONFIRM && (ConfirmVP == VP_SD_AbortPrintConfirmed || ConfirmVP == VP_SD_FileSelectConfirm)) + || current_screen == DGUSLCD_SCREEN_SDPRINTMANIPULATION + ) GotoScreen(DGUSLCD_SCREEN_MAIN); + } + +#endif // SDSUPPORT + +void DGUSScreenHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr) { + uint8_t *tmp = (uint8_t*)val_ptr; + + // The keycode in target is coded as , so 0x0100A means + // from screen 1 (main) to 10 (temperature). DGUSLCD_SCREEN_POPUP is special, + // meaning "return to previous screen" + DGUSLCD_Screens target = (DGUSLCD_Screens)tmp[1]; + + DEBUG_ECHOLNPAIR("\n DEBUG target", target); + + if (target == DGUSLCD_SCREEN_POPUP) { + // Special handling for popup is to return to previous menu + if (current_screen == DGUSLCD_SCREEN_POPUP && confirm_action_cb) confirm_action_cb(); + PopToOldScreen(); + return; + } + + UpdateNewScreen(target); + + #ifdef DEBUG_DGUSLCD + if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", target); + #endif +} + +void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleManualMove"); + + int16_t movevalue = swap16(*(uint16_t*)val_ptr); + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + if (movevalue) { + const uint16_t choice = *(uint16_t*)var.memadr; + movevalue = movevalue < 0 ? -choice : choice; + } + #endif + char axiscode; + unsigned int speed = 1500; // FIXME: get default feedrate for manual moves, dont hardcode. + + switch (var.VP) { + default: return; + + case VP_MOVE_X: + axiscode = 'X'; + if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove; + break; + + case VP_MOVE_Y: + axiscode = 'Y'; + if (!ExtUI::canMove(ExtUI::axis_t::Y)) goto cannotmove; + break; + + case VP_MOVE_Z: + axiscode = 'Z'; + speed = 300; // default to 5mm/s + if (!ExtUI::canMove(ExtUI::axis_t::Z)) goto cannotmove; + break; + + case VP_HOME_ALL: // only used for homing + axiscode = '\0'; + movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing. + break; + } + + if (!movevalue) { + // homing + DEBUG_ECHOPAIR(" homing ", axiscode); + char buf[6] = "G28 X"; + buf[4] = axiscode; + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); + //DEBUG_ECHOLNPGM(" ✓"); + ForceCompleteUpdate(); + return; + } + else { + // movement + DEBUG_ECHOPAIR(" move ", axiscode); + bool old_relative_mode = relative_mode; + if (!relative_mode) { + //DEBUG_ECHOPGM(" G91"); + queue.enqueue_now_P(PSTR("G91")); + //DEBUG_ECHOPGM(" ✓ "); + } + char buf[32]; // G1 X9999.99 F12345 + unsigned int backup_speed = MMS_TO_MMM(feedrate_mm_s); + char sign[] = "\0"; + int16_t value = movevalue / 100; + if (movevalue < 0) { value = -value; sign[0] = '-'; } + int16_t fraction = ABS(movevalue) % 100; + snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed); + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); + //DEBUG_ECHOLNPGM(" ✓ "); + if (backup_speed != speed) { + snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed); + queue.enqueue_one_now(buf); + //DEBUG_ECHOPAIR(" ", buf); + } + // while (!enqueue_and_echo_command(buf)) idle(); + //DEBUG_ECHOLNPGM(" ✓ "); + if (!old_relative_mode) { + //DEBUG_ECHOPGM("G90"); + queue.enqueue_now_P(PSTR("G90")); + //DEBUG_ECHOPGM(" ✓ "); + } + } + + ForceCompleteUpdate(); + DEBUG_ECHOLNPGM("manmv done."); + return; + + cannotmove: + DEBUG_ECHOLNPAIR(" cannot move ", axiscode); + return; +} + +#if HAS_PID_HEATING + void DGUSScreenHandler::HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t rawvalue = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("V1:", rawvalue); + float value = (float)rawvalue / 10; + DEBUG_ECHOLNPAIR("V2:", value); + float newvalue = 0; + + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_PID_P: newvalue = value; break; + case VP_E0_PID_I: newvalue = scalePID_i(value); break; + case VP_E0_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HOTENDS >= 2 + case VP_E1_PID_P: newvalue = value; break; + case VP_E1_PID_I: newvalue = scalePID_i(value); break; + case VP_E1_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HAS_HEATED_BED + case VP_BED_PID_P: newvalue = value; break; + case VP_BED_PID_I: newvalue = scalePID_i(value); break; + case VP_BED_PID_D: newvalue = scalePID_d(value); break; + #endif + } + + DEBUG_ECHOLNPAIR_F("V3:", newvalue); + *(float *)var.memadr = newvalue; + + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + } +#endif // HAS_PID_HEATING + +#if ENABLED(BABYSTEPPING) + void DGUSScreenHandler::HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleLiveAdjustZ"); + int16_t flag = swap16(*(uint16_t*)val_ptr), + steps = flag ? -20 : 20; + ExtUI::smartAdjustAxis_steps(steps, ExtUI::axis_t::Z, true); + ForceCompleteUpdate(); + } +#endif + +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + + void DGUSScreenHandler::HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleFilamentOption"); + + uint8_t e_temp = 0; + filament_data.heated = false; + uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); + if (preheat_option <= 8) { // Load filament type + filament_data.action = 1; + } + else if (preheat_option >= 10) { // Unload filament type + preheat_option -= 10; + filament_data.action = 2; + filament_data.purge_length = DGUS_FILAMENT_PURGE_LENGTH; + } + else { // Cancel filament operation + filament_data.action = 0; + } + + switch (preheat_option) { + case 0: // Load PLA + #ifdef PREHEAT_1_TEMP_HOTEND + e_temp = PREHEAT_1_TEMP_HOTEND; + #endif + break; + case 1: // Load ABS + TERN_(PREHEAT_2_TEMP_HOTEND, e_temp = PREHEAT_2_TEMP_HOTEND); + break; + case 2: // Load PET + #ifdef PREHEAT_3_TEMP_HOTEND + e_temp = PREHEAT_3_TEMP_HOTEND; + #endif + break; + case 3: // Load FLEX + #ifdef PREHEAT_4_TEMP_HOTEND + e_temp = PREHEAT_4_TEMP_HOTEND; + #endif + break; + case 9: // Cool down + default: + e_temp = 0; + break; + } + + if (filament_data.action == 0) { // Go back to utility screen + #if HOTENDS >= 1 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0); + #endif + #if HOTENDS >= 2 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1); + #endif + GotoScreen(DGUSLCD_SCREEN_UTILITY); + } + else { // Go to the preheat screen to show the heating progress + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E0; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + #if HOTENDS >= 2 + case VP_E1_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E1; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + } + GotoScreen(DGUSLCD_SCREEN_FILAMENT_HEATING); + } + } + + void DGUSScreenHandler::HandleFilamentLoadUnload(DGUS_VP_Variable &var) { + DEBUG_ECHOLNPGM("HandleFilamentLoadUnload"); + if (filament_data.action <= 0) return; + + // If we close to the target temperature, we can start load or unload the filament + if (thermalManager.hotEnoughToExtrude(filament_data.extruder) && \ + thermalManager.targetHotEnoughToExtrude(filament_data.extruder)) { + float movevalue = DGUS_FILAMENT_LOAD_LENGTH_PER_TIME; + + if (filament_data.action == 1) { // load filament + if (!filament_data.heated) { + //GotoScreen(DGUSLCD_SCREEN_FILAMENT_LOADING); + filament_data.heated = true; + } + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + } + else { // unload filament + if (!filament_data.heated) { + GotoScreen(DGUSLCD_SCREEN_FILAMENT_UNLOADING); + filament_data.heated = true; + } + // Before unloading extrude to prevent jamming + if (filament_data.purge_length >= 0) { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + filament_data.purge_length -= movevalue; + } + else { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) - movevalue; + } + } + ExtUI::setAxisPosition_mm(movevalue, filament_data.extruder); + } + } +#endif // DGUS_FILAMENT_LOADUNLOAD + +bool DGUSScreenHandler::loop() { + dgusdisplay.loop(); + + const millis_t ms = millis(); + static millis_t next_event_ms = 0; + + if (!IsScreenComplete() || ELAPSED(ms, next_event_ms)) { + next_event_ms = ms + DGUS_UPDATE_INTERVAL_MS; + UpdateScreenVPData(); + } + + #if ENABLED(SHOW_BOOTSCREEN) + static bool booted = false; + + if (!booted && TERN0(POWER_LOSS_RECOVERY, recovery.valid())) + booted = true; + + if (!booted && ELAPSED(ms, TERN(USE_MKS_GREEN_UI, 1000, BOOTSCREEN_TIMEOUT))) + booted = true; + #endif + return IsScreenComplete(); +} + +#endif // DGUS_LCD_UI_FYSETC diff --git a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h new file mode 100644 index 0000000000..28ab952e53 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSScreenHandler.h @@ -0,0 +1,240 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../DGUSDisplay.h" +#include "../DGUSVPVariable.h" +#include "../DGUSDisplayDef.h" + +#include "../../../../../inc/MarlinConfig.h" + +enum DGUSLCD_Screens : uint8_t; + +class DGUSScreenHandler { +public: + DGUSScreenHandler() = default; + + static bool loop(); + + // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen + // The bools specifing whether the strings are in RAM or FLASH. + static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + // "M117" Message -- msg is a RAM ptr. + static void setstatusmessage(const char* msg); + // The same for messages from Flash + static void setstatusmessagePGM(PGM_P const msg); + // Callback for VP "Display wants to change screen on idle printer" + static void ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ptr); + // Callback for VP "Screen has been changed" + static void ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr); + + // Callback for VP "All Heaters Off" + static void HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change this temperature" + static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change Flowrate" + static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + // Hook for manual move option + static void HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr); + #endif + + // Hook for manual move. + static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr); + // Hook for manual extrude. + static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr); + // Hook for motor lock and unlook + static void HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(POWER_LOSS_RECOVERY) + // Hook for power loss recovery. + static void HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for settings + static void HandleSettings(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr); + + #if HAS_PID_HEATING + // Hook for "Change this temperature PID para" + static void HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for PID autotune + static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_BED_PROBE + // Hook for "Change probe offset z" + static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(BABYSTEPPING) + // Hook for live z adjust action + static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_FAN + // Hook for fan control + static void HandleFanControl(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for heater control + static void HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_PREHEAT_UI) + // Hook for preheat + static void HandlePreheat(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + // Hook for filament load and unload filament option + static void HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr); + // Hook for filament load and unload + static void HandleFilamentLoadUnload(DGUS_VP_Variable &var); + #endif + + #if ENABLED(SDSUPPORT) + // Callback for VP "Display wants to change screen when there is a SD card" + static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr); + // Scroll buttons on the file listing screen. + static void DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable &var, void *val_ptr); + // File touched. + static void DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr); + // start print after confirmation received. + static void DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr); + // User hit the pause, resume or abort button. + static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr); + // User confirmed the abort action + static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr); + // User hit the tune button + static void DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr); + // Send a single filename to the display. + static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var); + // Marlin informed us that a new SD has been inserted. + static void SDCardInserted(); + // Marlin informed us that the SD Card has been removed(). + static void SDCardRemoved(); + // Marlin informed us about a bad SD Card. + static void SDCardError(); + #endif + + // OK Button the Confirm screen. + static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr); + + // Update data after went to new screen (by display or by GotoScreen) + // remember: store the last-displayed screen, so it can get returned to. + // (e.g for pop up messages) + static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false); + + // Recall the remembered screen. + static void PopToOldScreen(); + + // Make the display show the screen and update all VPs in it. + static void GotoScreen(DGUSLCD_Screens screen, bool ispopup = false); + + static void UpdateScreenVPData(); + + // Helpers to convert and transfer data to the display. + static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var); + static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var); + static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintProgressToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var); + + #if ENABLED(PRINTCOUNTER) + static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var); + #endif + #if HAS_FAN + static void DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var); + #endif + static void DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var); + #if ENABLED(DGUS_UI_WAITING) + static void DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var); + #endif + + // Send a value from 0..100 to a variable with a range from 0..255 + static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr); + + template + static void DGUSLCD_SetValueDirectly(DGUS_VP_Variable &var, void *val_ptr) { + if (!var.memadr) return; + union { unsigned char tmp[sizeof(T)]; T t; } x; + unsigned char *ptr = (unsigned char*)val_ptr; + LOOP_L_N(i, sizeof(T)) x.tmp[i] = ptr[sizeof(T) - i - 1]; + *(T*)var.memadr = x.t; + } + + // Send a float value to the display. + // Display will get a 4-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsLongValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (long)f); + } + } + + // Send a float value to the display. + // Display will get a 2-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsIntValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + DEBUG_ECHOLNPAIR_F(" >> ", f, 6); + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (int16_t)f); + } + } + + // Force an update of all VP on the current screen. + static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; } + // Has all VPs sent to the screen + static inline bool IsScreenComplete() { return ScreenComplete; } + + static inline DGUSLCD_Screens getCurrentScreen() { return current_screen; } + + static inline void SetupConfirmAction( void (*f)()) { confirm_action_cb = f; } + +private: + static DGUSLCD_Screens current_screen; //< currently on screen + static constexpr uint8_t NUM_PAST_SCREENS = 4; + static DGUSLCD_Screens past_screens[NUM_PAST_SCREENS]; //< LIFO with past screens for the "back" button. + + static uint8_t update_ptr; //< Last sent entry in the VPList for the actual screen. + static uint16_t skipVP; //< When updating the screen data, skip this one, because the user is interacting with it. + static bool ScreenComplete; //< All VPs sent to screen? + + static uint16_t ConfirmVP; //< context for confirm screen (VP that will be emulated-sent on "OK"). + + #if ENABLED(SDSUPPORT) + static int16_t top_file; //< file on top of file chooser + static int16_t file_to_print; //< touched file to be confirmed + #endif + + static void (*confirm_action_cb)(); +}; + +#if ENABLED(POWER_LOSS_RECOVERY) + #define PLR_SCREEN_RECOVER DGUSLCD_SCREEN_SDPRINTMANIPULATION + #define PLR_SCREEN_CANCEL DGUSLCD_SCREEN_STATUS +#endif diff --git a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.cpp new file mode 100644 index 0000000000..90cfae7f09 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.cpp @@ -0,0 +1,418 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_HYPRECY) + +#include "../DGUSScreenHandler.h" + +#include "../../../../../MarlinCore.h" +#include "../../../../../gcode/queue.h" +#include "../../../../../libs/duration_t.h" +#include "../../../../../module/settings.h" +#include "../../../../../module/temperature.h" +#include "../../../../../module/motion.h" +#include "../../../../../module/planner.h" +#include "../../../../../module/printcounter.h" +#include "../../../../../sd/cardreader.h" + +#if ENABLED(POWER_LOSS_RECOVERY) + #include "../../../../feature/powerloss.h" +#endif + +#if ENABLED(SDSUPPORT) + + void DGUSScreenHandler::DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t touched_nr = (int16_t)swap16(*(uint16_t*)val_ptr) + top_file; + if (touched_nr > filelist.count()) return; + if (!filelist.seek(touched_nr)) return; + + if (filelist.isDir()) { + filelist.changeDir(filelist.filename()); + top_file = 0; + ForceCompleteUpdate(); + return; + } + + #if ENABLED(DGUS_PRINT_FILENAME) + // Send print filename + dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), VP_SD_FileName_LEN, true); + #endif + + // Setup Confirmation screen + file_to_print = touched_nr; + + HandleUserConfirmationPopUp(VP_SD_FileSelectConfirm, nullptr, PSTR("Print file"), filelist.filename(), PSTR("from SD Card?"), true, true, false, true); + } + + void DGUSScreenHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) { + if (!filelist.seek(file_to_print)) return; + ExtUI::printFile(filelist.shortFilename()); + GotoScreen(DGUSLCD_SCREEN_SDPRINTMANIPULATION); + } + + void DGUSScreenHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) { + + if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes. + switch (swap16(*(uint16_t*)val_ptr)) { + case 0: { // Resume + if (ExtUI::isPrintingFromMediaPaused()) { + ExtUI::resumePrint(); + } + } break; + + case 1: // Pause + + GotoScreen(MKSLCD_SCREEN_PAUSE); + if (!ExtUI::isPrintingFromMediaPaused()) { + ExtUI::pausePrint(); + //ExtUI::mks_pausePrint(); + } + break; + case 2: // Abort + HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true); + break; + } + } + + void DGUSScreenHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) { + uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN; + if (target_line > DGUS_SD_FILESPERSCREEN) return; + char tmpfilename[VP_SD_FileName_LEN + 1] = ""; + var.memadr = (void*)tmpfilename; + + if (filelist.seek(top_file + target_line)) { + snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s%c"), filelist.filename(), filelist.isDir() ? '/' : 0); // snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s"), filelist.filename()); + } + DGUSLCD_SendStringToDisplay(var); + } + + void DGUSScreenHandler::SDCardInserted() { + top_file = 0; + filelist.refresh(); + auto cs = getCurrentScreen(); + if (cs == DGUSLCD_SCREEN_MAIN || cs == DGUSLCD_SCREEN_STATUS) + GotoScreen(DGUSLCD_SCREEN_SDFILELIST); + } + + void DGUSScreenHandler::SDCardRemoved() { + if (current_screen == DGUSLCD_SCREEN_SDFILELIST + || (current_screen == DGUSLCD_SCREEN_CONFIRM && (ConfirmVP == VP_SD_AbortPrintConfirmed || ConfirmVP == VP_SD_FileSelectConfirm)) + || current_screen == DGUSLCD_SCREEN_SDPRINTMANIPULATION + ) GotoScreen(DGUSLCD_SCREEN_MAIN); + } + +#endif // SDSUPPORT + +void DGUSScreenHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr) { + uint8_t *tmp = (uint8_t*)val_ptr; + + // The keycode in target is coded as , so 0x0100A means + // from screen 1 (main) to 10 (temperature). DGUSLCD_SCREEN_POPUP is special, + // meaning "return to previous screen" + DGUSLCD_Screens target = (DGUSLCD_Screens)tmp[1]; + + DEBUG_ECHOLNPAIR("\n DEBUG target", target); + + if (target == DGUSLCD_SCREEN_POPUP) { + // Special handling for popup is to return to previous menu + if (current_screen == DGUSLCD_SCREEN_POPUP && confirm_action_cb) confirm_action_cb(); + PopToOldScreen(); + return; + } + + UpdateNewScreen(target); + + #ifdef DEBUG_DGUSLCD + if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", target); + #endif +} + +void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleManualMove"); + + int16_t movevalue = swap16(*(uint16_t*)val_ptr); + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + if (movevalue) { + const uint16_t choice = *(uint16_t*)var.memadr; + movevalue = movevalue < 0 ? -choice : choice; + } + #endif + char axiscode; + unsigned int speed = 1500; // FIXME: get default feedrate for manual moves, dont hardcode. + + switch (var.VP) { + default: return; + + case VP_MOVE_X: + axiscode = 'X'; + if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove; + break; + + case VP_MOVE_Y: + axiscode = 'Y'; + if (!ExtUI::canMove(ExtUI::axis_t::Y)) goto cannotmove; + break; + + case VP_MOVE_Z: + axiscode = 'Z'; + speed = 300; // default to 5mm/s + if (!ExtUI::canMove(ExtUI::axis_t::Z)) goto cannotmove; + break; + + case VP_HOME_ALL: // only used for homing + axiscode = '\0'; + movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing. + break; + } + + if (!movevalue) { + // homing + DEBUG_ECHOPAIR(" homing ", axiscode); + char buf[6] = "G28 X"; + buf[4] = axiscode; + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); + //DEBUG_ECHOLNPGM(" ✓"); + ForceCompleteUpdate(); + return; + } + else { + // movement + DEBUG_ECHOPAIR(" move ", axiscode); + bool old_relative_mode = relative_mode; + if (!relative_mode) { + //DEBUG_ECHOPGM(" G91"); + queue.enqueue_now_P(PSTR("G91")); + //DEBUG_ECHOPGM(" ✓ "); + } + char buf[32]; // G1 X9999.99 F12345 + unsigned int backup_speed = MMS_TO_MMM(feedrate_mm_s); + char sign[] = "\0"; + int16_t value = movevalue / 100; + if (movevalue < 0) { value = -value; sign[0] = '-'; } + int16_t fraction = ABS(movevalue) % 100; + snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed); + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); + //DEBUG_ECHOLNPGM(" ✓ "); + if (backup_speed != speed) { + snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed); + queue.enqueue_one_now(buf); + //DEBUG_ECHOPAIR(" ", buf); + } + // while (!enqueue_and_echo_command(buf)) idle(); + //DEBUG_ECHOLNPGM(" ✓ "); + if (!old_relative_mode) { + //DEBUG_ECHOPGM("G90"); + queue.enqueue_now_P(PSTR("G90")); + //DEBUG_ECHOPGM(" ✓ "); + } + } + + ForceCompleteUpdate(); + DEBUG_ECHOLNPGM("manmv done."); + return; + + cannotmove: + DEBUG_ECHOLNPAIR(" cannot move ", axiscode); + return; +} + +#if HAS_PID_HEATING + void DGUSScreenHandler::HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t rawvalue = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("V1:", rawvalue); + float value = (float)rawvalue / 10; + DEBUG_ECHOLNPAIR("V2:", value); + float newvalue = 0; + + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_PID_P: newvalue = value; break; + case VP_E0_PID_I: newvalue = scalePID_i(value); break; + case VP_E0_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HOTENDS >= 2 + case VP_E1_PID_P: newvalue = value; break; + case VP_E1_PID_I: newvalue = scalePID_i(value); break; + case VP_E1_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HAS_HEATED_BED + case VP_BED_PID_P: newvalue = value; break; + case VP_BED_PID_I: newvalue = scalePID_i(value); break; + case VP_BED_PID_D: newvalue = scalePID_d(value); break; + #endif + } + + DEBUG_ECHOLNPAIR_F("V3:", newvalue); + *(float *)var.memadr = newvalue; + + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + } +#endif // HAS_PID_HEATING + +#if ENABLED(BABYSTEPPING) + void DGUSScreenHandler::HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleLiveAdjustZ"); + int16_t flag = swap16(*(uint16_t*)val_ptr), + steps = flag ? -20 : 20; + ExtUI::smartAdjustAxis_steps(steps, ExtUI::axis_t::Z, true); + ForceCompleteUpdate(); + } +#endif + +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + + void DGUSScreenHandler::HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleFilamentOption"); + + uint8_t e_temp = 0; + filament_data.heated = false; + uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); + if (preheat_option <= 8) { // Load filament type + filament_data.action = 1; + } + else if (preheat_option >= 10) { // Unload filament type + preheat_option -= 10; + filament_data.action = 2; + filament_data.purge_length = DGUS_FILAMENT_PURGE_LENGTH; + } + else { // Cancel filament operation + filament_data.action = 0; + } + + switch (preheat_option) { + case 0: // Load PLA + #ifdef PREHEAT_1_TEMP_HOTEND + e_temp = PREHEAT_1_TEMP_HOTEND; + #endif + break; + case 1: // Load ABS + TERN_(PREHEAT_2_TEMP_HOTEND, e_temp = PREHEAT_2_TEMP_HOTEND); + break; + case 2: // Load PET + #ifdef PREHEAT_3_TEMP_HOTEND + e_temp = PREHEAT_3_TEMP_HOTEND; + #endif + break; + case 3: // Load FLEX + #ifdef PREHEAT_4_TEMP_HOTEND + e_temp = PREHEAT_4_TEMP_HOTEND; + #endif + break; + case 9: // Cool down + default: + e_temp = 0; + break; + } + + if (filament_data.action == 0) { // Go back to utility screen + #if HOTENDS >= 1 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0); + #endif + #if HOTENDS >= 2 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1); + #endif + GotoScreen(DGUSLCD_SCREEN_UTILITY); + } + else { // Go to the preheat screen to show the heating progress + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E0; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + #if HOTENDS >= 2 + case VP_E1_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E1; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + } + GotoScreen(DGUSLCD_SCREEN_FILAMENT_HEATING); + } + } + + void DGUSScreenHandler::HandleFilamentLoadUnload(DGUS_VP_Variable &var) { + DEBUG_ECHOLNPGM("HandleFilamentLoadUnload"); + if (filament_data.action <= 0) return; + + // If we close to the target temperature, we can start load or unload the filament + if (thermalManager.hotEnoughToExtrude(filament_data.extruder) && \ + thermalManager.targetHotEnoughToExtrude(filament_data.extruder)) { + float movevalue = DGUS_FILAMENT_LOAD_LENGTH_PER_TIME; + + if (filament_data.action == 1) { // load filament + if (!filament_data.heated) { + //GotoScreen(DGUSLCD_SCREEN_FILAMENT_LOADING); + filament_data.heated = true; + } + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + } + else { // unload filament + if (!filament_data.heated) { + GotoScreen(DGUSLCD_SCREEN_FILAMENT_UNLOADING); + filament_data.heated = true; + } + // Before unloading extrude to prevent jamming + if (filament_data.purge_length >= 0) { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + filament_data.purge_length -= movevalue; + } + else { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) - movevalue; + } + } + ExtUI::setAxisPosition_mm(movevalue, filament_data.extruder); + } + } +#endif // DGUS_FILAMENT_LOADUNLOAD + +bool DGUSScreenHandler::loop() { + dgusdisplay.loop(); + + const millis_t ms = millis(); + static millis_t next_event_ms = 0; + + if (!IsScreenComplete() || ELAPSED(ms, next_event_ms)) { + next_event_ms = ms + DGUS_UPDATE_INTERVAL_MS; + UpdateScreenVPData(); + } + + #if ENABLED(SHOW_BOOTSCREEN) + static bool booted = false; + + if (!booted && TERN0(POWER_LOSS_RECOVERY, recovery.valid())) + booted = true; + + if (!booted && ELAPSED(ms, TERN(USE_MKS_GREEN_UI, 1000, BOOTSCREEN_TIMEOUT))) + booted = true; + #endif + return IsScreenComplete(); +} + +#endif // DGUS_LCD_UI_HYPRECY diff --git a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h new file mode 100644 index 0000000000..28ab952e53 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSScreenHandler.h @@ -0,0 +1,240 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../DGUSDisplay.h" +#include "../DGUSVPVariable.h" +#include "../DGUSDisplayDef.h" + +#include "../../../../../inc/MarlinConfig.h" + +enum DGUSLCD_Screens : uint8_t; + +class DGUSScreenHandler { +public: + DGUSScreenHandler() = default; + + static bool loop(); + + // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen + // The bools specifing whether the strings are in RAM or FLASH. + static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + // "M117" Message -- msg is a RAM ptr. + static void setstatusmessage(const char* msg); + // The same for messages from Flash + static void setstatusmessagePGM(PGM_P const msg); + // Callback for VP "Display wants to change screen on idle printer" + static void ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ptr); + // Callback for VP "Screen has been changed" + static void ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr); + + // Callback for VP "All Heaters Off" + static void HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change this temperature" + static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change Flowrate" + static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + // Hook for manual move option + static void HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr); + #endif + + // Hook for manual move. + static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr); + // Hook for manual extrude. + static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr); + // Hook for motor lock and unlook + static void HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(POWER_LOSS_RECOVERY) + // Hook for power loss recovery. + static void HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for settings + static void HandleSettings(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr); + + #if HAS_PID_HEATING + // Hook for "Change this temperature PID para" + static void HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for PID autotune + static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_BED_PROBE + // Hook for "Change probe offset z" + static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(BABYSTEPPING) + // Hook for live z adjust action + static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_FAN + // Hook for fan control + static void HandleFanControl(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for heater control + static void HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_PREHEAT_UI) + // Hook for preheat + static void HandlePreheat(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + // Hook for filament load and unload filament option + static void HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr); + // Hook for filament load and unload + static void HandleFilamentLoadUnload(DGUS_VP_Variable &var); + #endif + + #if ENABLED(SDSUPPORT) + // Callback for VP "Display wants to change screen when there is a SD card" + static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr); + // Scroll buttons on the file listing screen. + static void DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable &var, void *val_ptr); + // File touched. + static void DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr); + // start print after confirmation received. + static void DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr); + // User hit the pause, resume or abort button. + static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr); + // User confirmed the abort action + static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr); + // User hit the tune button + static void DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr); + // Send a single filename to the display. + static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var); + // Marlin informed us that a new SD has been inserted. + static void SDCardInserted(); + // Marlin informed us that the SD Card has been removed(). + static void SDCardRemoved(); + // Marlin informed us about a bad SD Card. + static void SDCardError(); + #endif + + // OK Button the Confirm screen. + static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr); + + // Update data after went to new screen (by display or by GotoScreen) + // remember: store the last-displayed screen, so it can get returned to. + // (e.g for pop up messages) + static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false); + + // Recall the remembered screen. + static void PopToOldScreen(); + + // Make the display show the screen and update all VPs in it. + static void GotoScreen(DGUSLCD_Screens screen, bool ispopup = false); + + static void UpdateScreenVPData(); + + // Helpers to convert and transfer data to the display. + static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var); + static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var); + static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintProgressToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var); + + #if ENABLED(PRINTCOUNTER) + static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var); + #endif + #if HAS_FAN + static void DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var); + #endif + static void DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var); + #if ENABLED(DGUS_UI_WAITING) + static void DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var); + #endif + + // Send a value from 0..100 to a variable with a range from 0..255 + static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr); + + template + static void DGUSLCD_SetValueDirectly(DGUS_VP_Variable &var, void *val_ptr) { + if (!var.memadr) return; + union { unsigned char tmp[sizeof(T)]; T t; } x; + unsigned char *ptr = (unsigned char*)val_ptr; + LOOP_L_N(i, sizeof(T)) x.tmp[i] = ptr[sizeof(T) - i - 1]; + *(T*)var.memadr = x.t; + } + + // Send a float value to the display. + // Display will get a 4-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsLongValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (long)f); + } + } + + // Send a float value to the display. + // Display will get a 2-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsIntValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + DEBUG_ECHOLNPAIR_F(" >> ", f, 6); + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (int16_t)f); + } + } + + // Force an update of all VP on the current screen. + static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; } + // Has all VPs sent to the screen + static inline bool IsScreenComplete() { return ScreenComplete; } + + static inline DGUSLCD_Screens getCurrentScreen() { return current_screen; } + + static inline void SetupConfirmAction( void (*f)()) { confirm_action_cb = f; } + +private: + static DGUSLCD_Screens current_screen; //< currently on screen + static constexpr uint8_t NUM_PAST_SCREENS = 4; + static DGUSLCD_Screens past_screens[NUM_PAST_SCREENS]; //< LIFO with past screens for the "back" button. + + static uint8_t update_ptr; //< Last sent entry in the VPList for the actual screen. + static uint16_t skipVP; //< When updating the screen data, skip this one, because the user is interacting with it. + static bool ScreenComplete; //< All VPs sent to screen? + + static uint16_t ConfirmVP; //< context for confirm screen (VP that will be emulated-sent on "OK"). + + #if ENABLED(SDSUPPORT) + static int16_t top_file; //< file on top of file chooser + static int16_t file_to_print; //< touched file to be confirmed + #endif + + static void (*confirm_action_cb)(); +}; + +#if ENABLED(POWER_LOSS_RECOVERY) + #define PLR_SCREEN_RECOVER DGUSLCD_SCREEN_SDPRINTMANIPULATION + #define PLR_SCREEN_CANCEL DGUSLCD_SCREEN_STATUS +#endif diff --git a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp new file mode 100644 index 0000000000..14b7394aaa --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp @@ -0,0 +1,795 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_MKS) + +#include "DGUSDisplayDef.h" +#include "../DGUSDisplay.h" +#include "../DGUSScreenHandler.h" + +#include "../../../../../module/temperature.h" +#include "../../../../../module/motion.h" +#include "../../../../../module/planner.h" + +#include "../../../ui_api.h" +#include "../../../../marlinui.h" + +#if ENABLED(HAS_STEALTHCHOP) + #include "../../../../module/stepper/trinamic.h" +#endif + +#if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + uint16_t distanceToMove = 10; +#endif + +uint16_t distanceMove = 1; +float distanceFilament = 10; +uint16_t FilamentSpeed = 25; +float ZOffset_distance = 0.1; +float mesh_adj_distance = 0.1; +float Z_distance = 0.1; + +int16_t level_1_x_point = 20; +int16_t level_1_y_point = 20; + +int16_t level_2_x_point = 20; +int16_t level_2_y_point = 20; + +int16_t level_3_x_point = 20; +int16_t level_3_y_point = 20; + +int16_t level_4_x_point = 20; +int16_t level_4_y_point = 20; +int16_t level_5_x_point = X_MAX_POS / 2; +int16_t level_5_y_point = Y_MAX_POS / 2; + +uint16_t tim_h; +uint16_t tim_m; +uint16_t tim_s; + +uint16_t x_park_pos = 20; +uint16_t y_park_pos = 20; +uint16_t z_park_pos = 10; + +xyz_pos_t position_before_pause; + +void MKS_pause_print_move() { + planner.synchronize(); + position_before_pause = current_position; + do_blocking_move_to(X_MIN_POS + x_park_pos, Y_MIN_POS + y_park_pos, current_position.z + z_park_pos); +} + +void MKS_resume_print_move() { do_blocking_move_to(position_before_pause); } + +uint16_t min_ex_temp = 0; + +float z_offset_add = 0; + +#if ENABLED(SENSORLESS_HOMING) + uint16_t tmc_x_step = 0; + uint16_t tmc_y_step = 0; + uint16_t tmc_z_step = 0; +#else + uint16_t tmc_x_step = 0; + uint16_t tmc_y_step = 0; + uint16_t tmc_z_step = 0; +#endif + +uint16_t lcd_default_light = 50; + +EX_FILAMENT_DEF ex_filament; +RUNOUT_MKS_DEF runout_mks; +NOZZLE_PARK_DEF nozzle_park_mks; + +const uint16_t VPList_Boot[] PROGMEM = { + VP_MARLIN_VERSION, + 0x0000 +}; + +#define MKSLIST_E_ITEM(N) VP_T_E##N##_Is, VP_T_E##N##_Set, + +const uint16_t VPList_Main[] PROGMEM = { + // VP_M117, for completeness, but it cannot be auto-uploaded. + #if HOTENDS >= 1 + MKSLIST_E_ITEM(0) VP_E0_STATUS, + #endif + #if HOTENDS >= 2 + MKSLIST_E_ITEM(1) + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS, + #endif + #if HAS_FAN + VP_Fan0_Percentage, VP_FAN0_STATUS, + #endif + VP_XPos, VP_YPos, VP_ZPos, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + VP_PrintProgress_Percentage, + #endif + 0x0000 +}; + +const uint16_t MKSList_Home[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + // Language + // VP_HOME_Dis, + + 0x0000 +}; + +const uint16_t MKSList_Setting[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + // Language + VP_Setting_Dis, + 0x0000 +}; + +const uint16_t MKSList_Tool[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + // Language + VP_Tool_Dis, + // LCD BLK + VP_LCD_BLK, + 0x0000 +}; + +const uint16_t MKSList_EXTRUE[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + VP_Filament_distance, + VP_Filament_speed, + + 0x0000 +}; + +const uint16_t MKSList_LEVEL[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + 0x0000 +}; + +const uint16_t MKSList_MOVE[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + 0x0000 +}; + +const uint16_t MKSList_Print[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + // Print Percent + VP_PrintProgress_Percentage, + + VP_PrintTime, + + VP_Flowrate_E0, + VP_Flowrate_E1, + VP_Feedrate_Percentage, + + VP_PrintTime_H, + VP_PrintTime_M, + VP_PrintTime_S, + + VP_XPos, + VP_YPos, + VP_ZPos, + + 0x0000 +}; + +const uint16_t MKSList_SD_File[] PROGMEM = { + VP_SD_FileName0, VP_SD_FileName1, + VP_SD_FileName2, VP_SD_FileName3, + VP_SD_FileName4, VP_SD_FileName5, + VP_SD_FileName6, VP_SD_FileName7, + VP_SD_FileName8, VP_SD_FileName9, + + 0x0000 +}; + +const uint16_t MKSList_TempOnly[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + // LCD BLK + VP_LCD_BLK, + 0x0000 +}; + +const uint16_t MKSList_Pluse[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + // Pluse + VP_X_STEP_PER_MM, + VP_Y_STEP_PER_MM, + VP_Z_STEP_PER_MM, + VP_E0_STEP_PER_MM, + VP_E1_STEP_PER_MM, + + 0x0000 +}; + +const uint16_t MKSList_MaxSpeed[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + // Pluse + VP_X_MAX_SPEED, + VP_Y_MAX_SPEED, + VP_Z_MAX_SPEED, + VP_E0_MAX_SPEED, + VP_E1_MAX_SPEED, + + 0x0000 +}; + +const uint16_t MKSList_MaxAcc[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + // ACC + VP_ACC_SPEED, + VP_X_ACC_MAX_SPEED, + VP_Y_ACC_MAX_SPEED, + VP_Z_ACC_MAX_SPEED, + VP_E0_ACC_MAX_SPEED, + VP_E1_ACC_MAX_SPEED, + + 0x0000 +}; + +const uint16_t MKSList_PID[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + // PID + VP_E0_PID_P, + VP_E0_PID_I, + VP_E0_PID_D, + + 0x0000 +}; + +const uint16_t MKSList_Level_Point[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + // FAN + VP_Fan0_Percentage, + + // Level Point + VP_Level_Point_One_X, + VP_Level_Point_One_Y, + VP_Level_Point_Two_X, + VP_Level_Point_Two_Y, + VP_Level_Point_Three_X, + VP_Level_Point_Three_Y, + VP_Level_Point_Four_X, + VP_Level_Point_Four_Y, + VP_Level_Point_Five_X, + VP_Level_Point_Five_Y, + + 0x0000 +}; + +const uint16_t MKSList_Level_PrintConfig[] PROGMEM = { + VP_T_E0_Set, + VP_T_E1_Set, + VP_T_Bed_Set, + VP_Flowrate_E0, + VP_Flowrate_E1, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + + 0x0000 +}; + +const uint16_t MKSList_PrintPauseConfig[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + + VP_X_PARK_POS, + VP_Y_PARK_POS, + VP_Z_PARK_POS, + + 0x0000 +}; + +const uint16_t MKSList_MotoConfig[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + + VP_TRAVEL_SPEED, + VP_FEEDRATE_MIN_SPEED, + VP_T_F_SPEED, + + 0x0000 +}; + +const uint16_t MKSList_EX_Config[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + VP_MIN_EX_T,VP_Min_EX_T_E, + 0x0000 +}; + +const uint16_t MKSTMC_Config[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + // HB Temp + VP_T_Bed_Is, VP_T_Bed_Set, + VP_MIN_EX_T, + + VP_TMC_X_STEP, + VP_TMC_Y_STEP, + VP_TMC_Z_STEP, + VP_TMC_X1_Current, + VP_TMC_Y1_Current, + VP_TMC_X_Current, + VP_TMC_Y_Current, + VP_TMC_Z_Current, + VP_TMC_E0_Current, + VP_TMC_E1_Current, + VP_TMC_Z1_Current, + + 0x0000 +}; + +const uint16_t MKSAuto_Level[] PROGMEM = { + VP_MESH_LEVEL_POINT_DIS, + VP_ZPos, + 0x0000 +}; + +const uint16_t MKSOffset_Config[] PROGMEM = { + // E Temp + REPEAT(EXTRUDERS, MKSLIST_E_ITEM) + VP_OFFSET_X, + VP_OFFSET_Y, + VP_OFFSET_Z, + 0x0000 +}; + +const uint16_t MKSBabyStep[] PROGMEM = { + VP_ZOffset_DE_DIS, + 0x0000 +}; + +const uint16_t MKSList_About[] PROGMEM = { + // Marlin version + VP_MARLIN_VERSION, + // H43 Version + VP_MKS_H43_VERSION, + VP_MKS_H43_UpdataVERSION, + 0x0000 +}; + +// Page data updata +const struct VPMapping VPMap[] PROGMEM = { + { MKSLCD_SCREEN_BOOT, VPList_Boot }, // Boot Page to show logo 0 + { MKSLCD_SCREEN_HOME, MKSList_Home }, // Home, Page 1 + { MKSLCD_SCREEN_SETTING, MKSList_Setting }, // Setting, Page 2 + { MKSLCD_SCREEM_TOOL, MKSList_Tool }, // Page 3 + { MKSLCD_SCREEN_EXTRUDE_P1, MKSList_EXTRUE }, // Page 4 + { MKSLCD_SCREEN_EXTRUDE_P2, MKSList_EXTRUE }, // Page 11 + { MKSLCD_PAUSE_SETTING_EX, MKSList_EXTRUE }, // Page 57 + { MKSLCD_PAUSE_SETTING_EX2, MKSList_EXTRUE }, // Page 61 + { MKSLCD_SCREEN_LEVEL, MKSList_LEVEL }, // Page 5 + { MKSLCD_SCREEN_MOVE, MKSList_MOVE }, // Page 6 + { MKSLCD_SCREEN_PRINT, MKSList_Print }, // Page 7 + { MKSLCD_SCREEN_PAUSE, MKSList_Print }, // Page 26 + { MKSLCD_SCREEN_CHOOSE_FILE, MKSList_SD_File }, // Page 15 + { MKSLCD_SCREEN_MOTOR_PLUSE, MKSList_Pluse }, // Page 51 + { MKSLCD_SCREEN_MOTOR_SPEED, MKSList_MaxSpeed }, // Page 55 + { MKSLCD_SCREEN_MOTOR_ACC_MAX, MKSList_MaxAcc }, // Page 53 + { MKSLCD_SCREEN_LEVEL_DATA, MKSList_Level_Point }, // Page 48 + { MKSLCD_PrintPause_SET, MKSList_PrintPauseConfig }, // Page 49 + { MKSLCD_FILAMENT_DATA, MKSList_SD_File }, // Page 50 + { MKSLCD_SCREEN_Config, MKSList_TempOnly }, // Page 46 + { MKSLCD_SCREEN_Config_MOTOR, MKSList_MotoConfig }, // Page 47 + { MKSLCD_PID, MKSList_PID }, // Page 56 + { MKSLCD_ABOUT, MKSList_About }, // Page 36 + { MKSLCD_SCREEN_PRINT_CONFIG, MKSList_Level_PrintConfig }, // Page 60 + { MKSLCD_SCREEN_EX_CONFIG, MKSList_EX_Config }, // Page 65 + { MKSLCD_SCREEN_TMC_Config, MKSTMC_Config }, // Page 70 + { MKSLCD_AUTO_LEVEL, MKSAuto_Level }, // Page 73 + { MKSLCD_Screen_Offset_Config, MKSOffset_Config }, // Page 30 + { MKSLCD_Screen_PMove, MKSList_MOVE }, // Page 64 + { MKSLCD_Screen_Baby, MKSBabyStep }, // Page 71 + //{ MKSLCD_SCREEN_LEVEL_DATA, MKSList_SD_File}, + //{ MKSLCD_SCREEN_HOME, VPList_Boot }, + { 0, nullptr } // List is terminated with an nullptr as table entry. +}; + +const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION; +const char H43Version[] PROGMEM = "MKS H43_V1.30"; +const char Updata_Time[] PROGMEM = STRING_DISTRIBUTION_DATE; + +// Helper to define a DGUS_VP_Variable for common use cases. +#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR) \ + { \ + .VP = VPADR, .memadr = VPADRVAR, .size = sizeof(VPADRVAR), \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR \ + } + +// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string) +#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR) \ + { \ + .VP = VPADR, .memadr = VPADRVAR, .size = STRLEN, \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR \ + } + +const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { + // Helper to detect touch events + VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr), + VPHELPER(VP_SCREENCHANGE_ASK, nullptr, ScreenHandler.ScreenChangeHookIfIdle, nullptr), + #if ENABLED(SDSUPPORT) + VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, ScreenHandler.ScreenChangeHookIfSD, nullptr), + #endif + VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr), + + // Back Button + VPHELPER(VP_BACK_PAGE, nullptr, &ScreenHandler.ScreenBackChange, nullptr), + VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr), + + VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr), + + VPHELPER(VP_X_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_Y_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_Z_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr), + + VPHELPER(VP_MOVE_DISTANCE, &distanceMove, &ScreenHandler.GetManualMovestep, nullptr), + + VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_LEVEL_POINT, nullptr, &ScreenHandler.ManualAssistLeveling, nullptr), + + #if ENABLED(POWER_LOSS_RECOVERY) + VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr), + #endif + VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr), + #if ENABLED(SINGLE_Z_CALIBRATION) + VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr), + #endif + #if ENABLED(FIRST_LAYER_CAL) + VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr), + #endif + {.VP = VP_MARLIN_VERSION, .memadr = (void *)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM}, + // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr + {.VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay}, + {.VP = VP_MKS_H43_VERSION, .memadr = (void *)H43Version, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM}, + {.VP = VP_MKS_H43_UpdataVERSION, .memadr = (void *)Updata_Time, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM}, + + // Temperature Data + #if HOTENDS >= 1 + VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr), + VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr), + VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(DGUS_PREHEAT_UI) + VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr), + #endif + #if ENABLED(PIDTEMP) + VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr), + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + VPHELPER(VP_LOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentLoad, nullptr), + VPHELPER(VP_UNLOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentUnLoad, nullptr), + VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_Filament_speed, &FilamentSpeed, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #endif + + #if HOTENDS >= 2 + VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr), + VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr), + VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay), + + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_Filament_speed, &FilamentSpeed, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + + #if ENABLED(PIDTEMP) + VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr), + #endif + + VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload), + #endif + + #if HAS_HEATED_BED + VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr), + VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(PIDTEMPBED) + VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr), + #endif + #endif + + // Fan Data + #if HAS_FAN + #define FAN_VPHELPER(N) \ + VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_SetUint8, &ScreenHandler.DGUSLCD_SendFanToDisplay), \ + VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \ + VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay), + REPEAT(FAN_COUNT, FAN_VPHELPER) + #endif + + // Feedrate + VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + + // Position Data + VPHELPER(VP_XPos, ¤t_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_YPos, ¤t_position.y, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_ZPos, ¤t_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + + // Level Point Set + VPHELPER(VP_Level_Point_One_X, &level_1_x_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_One_Y, &level_1_y_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Two_X, &level_2_x_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Two_Y, &level_2_y_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Three_X, &level_3_x_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Three_Y, &level_3_y_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Four_X, &level_4_x_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Four_Y, &level_4_y_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Five_X, &level_5_x_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Level_Point_Five_Y, &level_5_y_point, ScreenHandler.HandleChangeLevelPoint_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + + // Print Progress + VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay), + + //LCD Control + VPHELPER(VP_LCD_BLK, &lcd_default_light, &ScreenHandler.LCD_BLK_Adjust, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + + // Print Time + VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay_MKS), + + #if ENABLED(PRINTCOUNTER) + VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay), + VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay), + #endif + + VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + + VPHELPER(VP_X_MAX_SPEED, &planner.settings.max_feedrate_mm_s[X_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_Y_MAX_SPEED, &planner.settings.max_feedrate_mm_s[Y_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_Z_MAX_SPEED, &planner.settings.max_feedrate_mm_s[Z_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + + #if HOTENDS >= 1 + VPHELPER(VP_E0_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E0_AXIS], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + #endif + #if HOTENDS >= 2 + VPHELPER(VP_E1_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E1_AXIS], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + #endif + + VPHELPER(VP_X_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[X_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Y_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[Y_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Z_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[Z_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + + #if HOTENDS >= 1 + VPHELPER(VP_E0_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E0_AXIS], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if HOTENDS >= 2 + VPHELPER(VP_E1_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E1_AXIS], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + + VPHELPER(VP_TRAVEL_SPEED, (uint16_t *)&planner.settings.travel_acceleration, ScreenHandler.HandleTravelAccChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_FEEDRATE_MIN_SPEED, (uint16_t *)&planner.settings.min_feedrate_mm_s, ScreenHandler.HandleFeedRateMinChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_T_F_SPEED, (uint16_t *)&planner.settings.min_travel_feedrate_mm_s, ScreenHandler.HandleMin_T_F_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + VPHELPER(VP_ACC_SPEED, (uint16_t *)&planner.settings.acceleration, ScreenHandler.HandleAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + + VPHELPER(VP_X_PARK_POS, &x_park_pos, ScreenHandler.GetParkPos_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Y_PARK_POS, &y_park_pos, ScreenHandler.GetParkPos_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Z_PARK_POS, &z_park_pos, ScreenHandler.GetParkPos_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_MIN_EX_T, &thermalManager.extrude_min_temp, ScreenHandler.HandleGetExMinTemp_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + + #if ENABLED(SENSORLESS_HOMING) // TMC SENSORLESS Setting + #if AXIS_HAS_STEALTHCHOP(X) + VPHELPER(VP_TMC_X_STEP, &tmc_x_step, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendTMCStepValue), + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + VPHELPER(VP_TMC_Y_STEP, &tmc_y_step, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendTMCStepValue), + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + VPHELPER(VP_TMC_Z_STEP, &tmc_z_step, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendTMCStepValue), + #endif + #endif + + #if HAS_TRINAMIC_CONFIG // TMC Current Setting + #if AXIS_IS_TMC(X) + VPHELPER(VP_TMC_X_Current, &stepperX.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if AXIS_IS_TMC(Y) + VPHELPER(VP_TMC_Y_Current, &stepperY.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if AXIS_IS_TMC(Z) + VPHELPER(VP_TMC_Z_Current, &stepperZ.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if AXIS_IS_TMC(E0) + VPHELPER(VP_TMC_E0_Current, &stepperE0.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if AXIS_IS_TMC(E1) + VPHELPER(VP_TMC_E1_Current, &stepperE1.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if AXIS_IS_TMC(X2) + VPHELPER(VP_TMC_X1_Current, &stepperX2.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if AXIS_IS_TMC(Y2) + VPHELPER(VP_TMC_Y1_Current, &stepperY2.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #if AXIS_IS_TMC(Z2) + VPHELPER(VP_TMC_Z1_Current, &stepperZ2.val_mA, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendWordValueToDisplay), + #endif + #endif + + VPHELPER(VP_EEPROM_CTRL, nullptr, ScreenHandler.EEPROM_CTRL, nullptr), + VPHELPER(VP_LEVEL_BUTTON, nullptr, ScreenHandler.Level_Ctrl_MKS, nullptr), + VPHELPER(VP_LANGUAGE_CHANGE, nullptr, ScreenHandler.LanguageChange_MKS, nullptr), + + //VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr), + + VPHELPER(VP_SD_Print_LiveAdjustZ_Confirm, nullptr, ScreenHandler.ZoffsetConfirm, nullptr), + + VPHELPER(VP_ZOffset_Distance,nullptr ,ScreenHandler.GetZoffsetDistance, nullptr), + VPHELPER(VP_MESH_LEVEL_ADJUST, nullptr, ScreenHandler.MeshLevelDistanceConfig, nullptr), + VPHELPER(VP_MESH_LEVEL_POINT,nullptr, ScreenHandler.MeshLevel,nullptr), + VPHELPER(VP_Min_EX_T_E, &thermalManager.extrude_min_temp, &ScreenHandler.GetMinExtrudeTemp, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_AutoTurnOffSw, nullptr, &ScreenHandler.GetTurnOffCtrl, nullptr), + + #if HOTENDS >= 1 + VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + #endif + #if HOTENDS >= 2 + VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>), + #endif + + + // SDCard File listing + #if ENABLED(SDSUPPORT) + VPHELPER(VP_SD_ScrollEvent, nullptr, ScreenHandler.DGUSLCD_SD_ScrollFilelist, nullptr), + VPHELPER(VP_SD_FileSelected, nullptr, ScreenHandler.DGUSLCD_SD_FileSelected, nullptr), + VPHELPER(VP_SD_FileSelectConfirm, nullptr, ScreenHandler.DGUSLCD_SD_StartPrint, nullptr), + VPHELPER_STR(VP_SD_FileName0, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName1, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName2, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName3, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName5, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName6, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName7, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName8, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER_STR(VP_SD_FileName9, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename), + VPHELPER(VP_SD_ResumePauseAbort, nullptr, ScreenHandler.DGUSLCD_SD_ResumePauseAbort, nullptr), + VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr), + VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr), + #if ENABLED(BABYSTEPPING) + VPHELPER(VP_SD_Print_LiveAdjustZ,nullptr, ScreenHandler.HandleLiveAdjustZ, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>), + VPHELPER(VP_ZOffset_DE_DIS,&z_offset_add,nullptr, &ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + #endif + #if HAS_BED_PROBE + VPHELPER(VP_OFFSET_X, &probe.offset.x, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_OFFSET_Y, &probe.offset.y, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_OFFSET_Z, &probe.offset.z, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + #endif + #endif + + #if ENABLED(DGUS_UI_WAITING) + VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, ScreenHandler.DGUSLCD_SendWaitingStatusToDisplay), + #endif + + // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content. + //{.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM}, + //{.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM}, + //{.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM}, + //{.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM}, + + {.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS}, + {.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS}, + {.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS}, + {.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS}, + + VPHELPER(0, 0, 0, 0) // must be last entry. +}; + +#endif // DGUS_LCD_UI_MKS diff --git a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.h b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.h new file mode 100644 index 0000000000..47695edf0f --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.h @@ -0,0 +1,908 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../DGUSDisplayDef.h" + +//#define USE_MKS_GREEN_UI +//#define DGUS_MKS_RUNOUT_SENSOR + +#define LOGO_TIME_DELAY TERN(USE_MKS_GREEN_UI, 5000, 1500) + +#if ENABLED(DGUS_MKS_RUNOUT_SENSOR) + #define MT_DET_1_PIN 1 + #define MT_DET_2_PIN 2 + #define MT_DET_PIN_INVERTING false +#endif + +#define MKS_FINSH + +extern uint16_t distanceMove; +extern float distanceFilament; +extern uint16_t FilamentSpeed; +extern float ZOffset_distance; +extern float mesh_adj_distance; +extern float Z_distance; + +extern int16_t level_1_x_point; +extern int16_t level_1_y_point; +extern int16_t level_2_x_point; +extern int16_t level_2_y_point; +extern int16_t level_3_x_point; +extern int16_t level_3_y_point; +extern int16_t level_4_x_point; +extern int16_t level_4_y_point; +extern int16_t level_5_x_point; +extern int16_t level_5_y_point; + +extern uint16_t tim_h; +extern uint16_t tim_m; +extern uint16_t tim_s; + +extern uint16_t x_park_pos; +extern uint16_t y_park_pos; +extern uint16_t z_park_pos; + +extern xyz_pos_t position_before_pause; +void MKS_pause_print_move(); +void MKS_resume_print_move(); + +extern uint16_t min_ex_temp; + +extern float z_offset_add; + +extern uint16_t tmc_x_step; +extern uint16_t tmc_y_step; +extern uint16_t tmc_z_step; + +extern uint16_t lcd_default_light; + +#if AXIS_HAS_STEALTHCHOP(X) + extern uint16_t tmc_x_current; +#endif +#if AXIS_HAS_STEALTHCHOP(Y) + extern uint16_t tmc_y_current; +#endif +#if AXIS_HAS_STEALTHCHOP(Z) + extern uint16_t tmc_z_current; +#endif +#if AXIS_HAS_STEALTHCHOP(E0) + extern uint16_t tmc_e0_current; +#endif +#if AXIS_HAS_STEALTHCHOP(E1) + extern uint16_t tmc_e1_current; +#endif + +typedef enum { + EX_HEATING, + EX_HEAT_STARUS, + EX_CHANGING, + EX_CHANGE_STATUS, + EX_NONE, +} EX_STATUS_DEF; + +typedef struct { + //uint8_t ex_change_flag:1; + //uint8_t ex_heat_flag:1; + uint8_t ex_load_unload_flag:1; //0:unload 1:load + EX_STATUS_DEF ex_status; + uint32_t ex_tick_start; + uint32_t ex_tick_end; + uint32_t ex_speed; + uint32_t ex_length; + uint32_t ex_need_time; +} EX_FILAMENT_DEF; + +extern EX_FILAMENT_DEF ex_filament; + +typedef enum { + UNRUNOUT_STATUS, + RUNOUT_STATUS, + RUNOUT_WAITTING_STATUS, + RUNOUT_BEGIN_STATUS, +} RUNOUT_MKS_STATUS_DEF; + +typedef struct { + RUNOUT_MKS_STATUS_DEF runout_status; + uint8_t pin_status; + uint8_t de_count; + uint8_t de_times; +} RUNOUT_MKS_DEF; + +extern RUNOUT_MKS_DEF runout_mks; + +typedef struct { + uint8_t print_pause_start_flag:1; + uint8_t runout_flag:1; + bool blstatus; + uint16_t x_pos; + uint16_t y_pos; + uint16_t z_pos; +} NOZZLE_PARK_DEF; + +extern NOZZLE_PARK_DEF nozzle_park_mks; + +enum DGUSLCD_Screens : uint8_t { + #if ENABLED(USE_MKS_GREEN_UI) + + DGUSLCD_SCREEN_BOOT = 33, + DGUSLCD_SCREEN_MAIN = 60, + DGUSLCD_SCREEN_STATUS = 60, + DGUSLCD_SCREEN_STATUS2 = 60, + DGUSLCD_SCREEN_PREHEAT = 18, + DGUSLCD_SCREEN_POWER_LOSS = 100, + DGUSLCD_SCREEN_MANUALMOVE = 192, + DGUSLCD_SCREEN_UTILITY = 120, + DGUSLCD_SCREEN_FILAMENT_UNLOADING = 158, + DGUSLCD_SCREEN_SDFILELIST = 15, + DGUSLCD_SCREEN_SDPRINTMANIPULATION = 15, + DGUSLCD_SCREEN_SDPRINTTUNE = 17, + + MKSLCD_SCREEN_BOOT = 33, + MKSLCD_SCREEN_HOME = 60, // MKS main page + MKSLCD_SCREEN_SETTING = 62, // MKS Setting page / no wifi whit + MKSLCD_SCREEM_TOOL = 64, // MKS Tool page + MKSLCD_SCREEN_EXTRUDE_P1 = 75, + MKSLCD_SCREEN_EXTRUDE_P2 = 77, + MKSLCD_SCREEN_LEVEL = 73, + MKSLCD_AUTO_LEVEL = 81, + MKSLCD_SCREEN_MOVE = 66, + MKSLCD_SCREEN_PRINT = 68, + MKSLCD_SCREEN_PAUSE = 70, + MKSLCD_SCREEN_CHOOSE_FILE = 87, + MKSLCD_SCREEN_NO_CHOOSE_FILE = 88, + MKSLCD_SCREEN_Config = 101, + MKSLCD_SCREEN_Config_MOTOR = 103, + MKSLCD_SCREEN_MOTOR_PLUSE = 104, + MKSLCD_SCREEN_MOTOR_SPEED = 102, + MKSLCD_SCREEN_MOTOR_ACC_MAX = 105, + MKSLCD_SCREEN_PRINT_CONFIG = 72, + MKSLCD_SCREEN_LEVEL_DATA = 106, + MKSLCD_PrintPause_SET = 107, + //MKSLCD_FILAMENT_DATA = 50, + MKSLCD_ABOUT = 83, + MKSLCD_PID = 108, + MKSLCD_PAUSE_SETTING_MOVE = 98, + MKSLCD_PAUSE_SETTING_EX = 96, + MKSLCD_PAUSE_SETTING_EX2 = 97, + MKSLCD_SCREEN_PRINT_CONFIRM = 94, + MKSLCD_SCREEN_EX_CONFIG = 112, + MKSLCD_SCREEN_EEP_Config = 89, + MKSLCD_SCREEN_PrintDone = 92, + MKSLCD_SCREEN_TMC_Config = 111, + MKSLCD_Screen_Offset_Config = 109, + MKSLCD_Screen_PMove = 98, + MKSLCD_Screen_Baby = 79, + + #else + + DGUSLCD_SCREEN_BOOT = 120, + DGUSLCD_SCREEN_MAIN = 1, + + DGUSLCD_SCREEN_STATUS = 1, + DGUSLCD_SCREEN_STATUS2 = 1, + DGUSLCD_SCREEN_PREHEAT = 18, + DGUSLCD_SCREEN_POWER_LOSS = 100, + DGUSLCD_SCREEN_MANUALMOVE = 192, + DGUSLCD_SCREEN_UTILITY = 120, + DGUSLCD_SCREEN_FILAMENT_UNLOADING = 158, + DGUSLCD_SCREEN_SDFILELIST = 15, + DGUSLCD_SCREEN_SDPRINTMANIPULATION = 15, + DGUSLCD_SCREEN_SDPRINTTUNE = 17, + + MKSLCD_SCREEN_BOOT = 0, + MKSLCD_SCREEN_HOME = 1, // MKS main page + MKSLCD_SCREEN_SETTING = 2, // MKS Setting page / no wifi whit + MKSLCD_SCREEM_TOOL = 3, // MKS Tool page + MKSLCD_SCREEN_EXTRUDE_P1 = 4, + MKSLCD_SCREEN_EXTRUDE_P2 = 11, + MKSLCD_SCREEN_LEVEL = 5, + MKSLCD_AUTO_LEVEL = 73, + MKSLCD_SCREEN_LEVEL_PRESS = 9, + MKSLCD_SCREEN_MOVE = 6, + MKSLCD_SCREEN_PRINT = 7, + MKSLCD_SCREEN_PRINT_PRESS = 13, + MKSLCD_SCREEN_PAUSE = 26, + MKSLCD_SCREEN_PAUSE_PRESS = 26, + MKSLCD_SCREEN_CHOOSE_FILE = 15, + MKSLCD_SCREEN_NO_CHOOSE_FILE = 17, + MKSLCD_SCREEN_Config = 46, + MKSLCD_SCREEN_Config_MOTOR = 47, + MKSLCD_SCREEN_MOTOR_PLUSE = 51, + MKSLCD_SCREEN_MOTOR_SPEED = 55, + MKSLCD_SCREEN_MOTOR_ACC_MAX = 53, + MKSLCD_SCREEN_PRINT_CONFIG = 60, + MKSLCD_SCREEN_LEVEL_DATA = 48, + MKSLCD_PrintPause_SET = 49, + MKSLCD_FILAMENT_DATA = 50, + MKSLCD_ABOUT = 36, + MKSLCD_PID = 56, + MKSLCD_PAUSE_SETTING_MOVE = 58, + MKSLCD_PAUSE_SETTING_EX = 57, + MKSLCD_PAUSE_SETTING_EX2 = 61, + MKSLCD_SCREEN_NO_FILE = 42, + MKSLCD_SCREEN_PRINT_CONFIRM = 43, + MKSLCD_SCREEN_EX_CONFIG = 65, + MKSLCD_SCREEN_EEP_Config = 20, + MKSLCD_SCREEN_PrintDone = 25, + MKSLCD_SCREEN_TMC_Config = 70, + MKSLCD_Screen_Offset_Config = 30, + MKSLCD_Screen_PMove = 64, + MKSLCD_Screen_Baby = 71, + + #endif + + DGUSLCD_SCREEN_CONFIRM = 240, + DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version") + DGUSLCD_SCREEN_WAITING = 251, + DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen" + DGUSLDC_SCREEN_UNUSED = 255 +}; + +// Display Memory layout used (T5UID) +// Except system variables this is arbitrary, just to organize stuff.... + +// 0x0000 .. 0x0FFF -- System variables and reserved by the display +// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version +// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action) +// 0x3000 .. 0x4FFF -- Marlin Data to be displayed +// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused + +// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight, +// so that we can keep variables nicely together in the address space. + +// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out. + +// constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible +// constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible +// constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality. +// constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd. + +// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup. +// constexpr uint16_t VP_MSGSTR1 = 0x1100; +// constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... +// constexpr uint16_t VP_MSGSTR2 = 0x1140; +// constexpr uint8_t VP_MSGSTR2_LEN = 0x20; +// constexpr uint16_t VP_MSGSTR3 = 0x1180; +// constexpr uint8_t VP_MSGSTR3_LEN = 0x20; +// constexpr uint16_t VP_MSGSTR4 = 0x11C0; +// constexpr uint8_t VP_MSGSTR4_LEN = 0x20; + +// Screenchange request for screens that only make sense when printer is idle. +// e.g movement is only allowed if printer is not printing. +// Marlin must confirm by setting the screen manually. +// constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000; +// constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. +// constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)= +// constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card. +// constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen. + +// // Buttons on the SD-Card File listing. +// constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down +// constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected. +// constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) + +// constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints +// constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog) +// constexpr uint16_t VP_SD_Print_Setting = 0x2040; +// constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up + +// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values +// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support) +// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us +// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm. +// constexpr uint16_t VP_MOVE_X = 0x2100; +// constexpr uint16_t VP_MOVE_Y = 0x2102; +// constexpr uint16_t VP_MOVE_Z = 0x2104; +// constexpr uint16_t VP_MOVE_E0 = 0x2110; +// constexpr uint16_t VP_MOVE_E1 = 0x2112; +// //constexpr uint16_t VP_MOVE_E2 = 0x2114; +// //constexpr uint16_t VP_MOVE_E3 = 0x2116; +// //constexpr uint16_t VP_MOVE_E4 = 0x2118; +// //constexpr uint16_t VP_MOVE_E5 = 0x211A; +// constexpr uint16_t VP_HOME_ALL = 0x2120; +// constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130; +// constexpr uint16_t VP_XYZ_HOME = 0x2132; + +// Power loss recovery +// constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180; + +// // Fan Control Buttons , switch between "off" and "on" +// constexpr uint16_t VP_FAN0_CONTROL = 0x2200; +// constexpr uint16_t VP_FAN1_CONTROL = 0x2202; +// constexpr uint16_t VP_FAN2_CONTROL = 0x2204; +// constexpr uint16_t VP_FAN3_CONTROL = 0x2206; + +// // Heater Control Buttons , triged between "cool down" and "heat PLA" state +// constexpr uint16_t VP_E0_CONTROL = 0x2210; +// constexpr uint16_t VP_E1_CONTROL = 0x2212; +// //constexpr uint16_t VP_E2_CONTROL = 0x2214; +// //constexpr uint16_t VP_E3_CONTROL = 0x2216; +// //constexpr uint16_t VP_E4_CONTROL = 0x2218; +// //constexpr uint16_t VP_E5_CONTROL = 0x221A; +// constexpr uint16_t VP_BED_CONTROL = 0x221C; + +// // Preheat +// constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220; +// constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222; +// //constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224; +// //constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226; +// //constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228; +// //constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A; + +// // Filament load and unload +// // constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300; +// // constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2302; + +// // Settings store , reset + +// // PID autotune +// constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410; +// constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412; +// //constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414; +// //constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416; +// //constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418; +// //constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A; +// constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420; +// // Calibrate Z +// constexpr uint16_t VP_Z_CALIBRATE = 0x2430; + +// First layer cal +// constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded + +// Firmware version on the boot screen. +// constexpr uint16_t VP_MARLIN_VERSION = 0x3000; +// constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. + +// Place for status messages. +constexpr uint16_t VP_M117 = 0x7020; +constexpr uint8_t VP_M117_LEN = 0x20; + +// // Temperatures. +// constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer +// constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer +// constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer +// // reserved to support up to 6 Extruders: +// constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer +// constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer +// constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer +// constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer +// constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer +// constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer +// constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer +// constexpr uint16_t VP_T_E5_Is = 0x3074; // 4 Byte Integer +// constexpr uint16_t VP_T_E5_Set = 0x3076; // 2 Byte Integer +// constexpr uint16_t VP_T_E6_Is = 0x3078; // 4 Byte Integer +// constexpr uint16_t VP_T_E6_Set = 0x307A; // 2 Byte Integer +// constexpr uint16_t VP_T_E7_Is = 0x3078; // 4 Byte Integer +// constexpr uint16_t VP_T_E7_Set = 0x307A; // 2 Byte Integer + + +// constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer +// constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer + +// constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer +// constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer +// // reserved for up to 6 Extruders: +// constexpr uint16_t VP_Flowrate_E2 = 0x3094; +// constexpr uint16_t VP_Flowrate_E3 = 0x3096; +// constexpr uint16_t VP_Flowrate_E4 = 0x3098; +// constexpr uint16_t VP_Flowrate_E5 = 0x309A; + +// constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100) +// constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100) +// constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100) +// constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100) +// constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100) + +// Actual Position +// constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy +// constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy +// constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy +// constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy + +// constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100) + +// constexpr uint16_t VP_PrintTime = 0x3140; +// constexpr uint16_t VP_PrintTime_LEN = 32; + +// constexpr uint16_t VP_PrintAccTime = 0x3160; +// constexpr uint16_t VP_PrintAccTime_LEN = 32; + +// constexpr uint16_t VP_PrintsTotal = 0x3180; +// constexpr uint16_t VP_PrintsTotal_LEN = 16; + +// // SDCard File Listing +// constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. +// constexpr uint16_t DGUS_SD_FILESPERSCREEN = 8; // FIXME move that info to the display and read it from there. +// constexpr uint16_t VP_SD_FileName0 = 0x3200; +// constexpr uint16_t VP_SD_FileName1 = 0x3220; +// constexpr uint16_t VP_SD_FileName2 = 0x3240; +// constexpr uint16_t VP_SD_FileName3 = 0x3260; +// constexpr uint16_t VP_SD_FileName4 = 0x3280; +// constexpr uint16_t VP_SD_FileName5 = 0x32A0; +// constexpr uint16_t VP_SD_FileName6 = 0x32C0; +// constexpr uint16_t VP_SD_FileName7 = 0x32E0; + +// Heater status +constexpr uint16_t VP_E0_STATUS = 0x3410; +constexpr uint16_t VP_E1_STATUS = 0x3412; +//constexpr uint16_t VP_E2_STATUS = 0x3414; +//constexpr uint16_t VP_E3_STATUS = 0x3416; +//constexpr uint16_t VP_E4_STATUS = 0x3418; +//constexpr uint16_t VP_E5_STATUS = 0x341A; +constexpr uint16_t VP_MOVE_OPTION = 0x3500; + +// // PIDs +// constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4 +// constexpr uint16_t VP_E0_PID_I = 0x3702; +// constexpr uint16_t VP_E0_PID_D = 0x3704; +// constexpr uint16_t VP_E1_PID_P = 0x3706; // at the moment , 2 byte unsigned int , 0~1638.4 +// constexpr uint16_t VP_E1_PID_I = 0x3708; +// constexpr uint16_t VP_E1_PID_D = 0x370A; +// constexpr uint16_t VP_BED_PID_P = 0x3710; +// constexpr uint16_t VP_BED_PID_I = 0x3712; +// constexpr uint16_t VP_BED_PID_D = 0x3714; + +// Wating screen status +constexpr uint16_t VP_WAITING_STATUS = 0x3800; + +// SPs for certain variables... +// located at 0x5000 and up +// Not used yet! +// This can be used e.g to make controls / data display invisible +constexpr uint16_t SP_T_E0_Is = 0x5000; +constexpr uint16_t SP_T_E0_Set = 0x5010; +constexpr uint16_t SP_T_E1_Is = 0x5020; +constexpr uint16_t SP_T_Bed_Is = 0x5030; +constexpr uint16_t SP_T_Bed_Set = 0x5040; + +/************************************************************************************************************************* + ************************************************************************************************************************* + * DGUS for MKS Mem layout + ************************************************************************************************************************ + ************************************************************************************************************************/ + +#if ENABLED(MKS_FINSH) + /* -------------------------------0x1000-0x1FFF------------------------------- */ + constexpr uint16_t VP_MSGSTR1 = 0x1100; + constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... + constexpr uint16_t VP_MSGSTR2 = 0x1140; + constexpr uint8_t VP_MSGSTR2_LEN = 0x20; + constexpr uint16_t VP_MSGSTR3 = 0x1180; + constexpr uint8_t VP_MSGSTR3_LEN = 0x20; + constexpr uint16_t VP_MSGSTR4 = 0x11C0; + constexpr uint8_t VP_MSGSTR4_LEN = 0x20; + + constexpr uint16_t VP_MARLIN_VERSION = 0x1A00; + constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. + + + constexpr uint16_t VP_SCREENCHANGE_ASK = 0x1500; + constexpr uint16_t VP_SCREENCHANGE = 0x1501; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. + constexpr uint16_t VP_TEMP_ALL_OFF = 0x1502; // Turn all heaters off. Value arbitrary ;)= + constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x1503; // "Print" Button touched -- go only there if there is an SD Card. + constexpr uint16_t VP_CONFIRMED = 0x1510; // OK on confirm screen. + + constexpr uint16_t VP_BACK_PAGE = 0x1600; + constexpr uint16_t VP_SETTINGS = 0x1620; + // Power loss recovery + constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x1680; + /* -------------------------------0x2000-0x2FFF------------------------------- */ + // Temperatures. + constexpr uint16_t VP_T_E0_Is = 0x2000; // 4 Byte Integer + constexpr uint16_t VP_T_E0_Set = 0x2004; // 2 Byte Integer + constexpr uint16_t VP_T_E1_Is = 0x2008; // 4 Byte Integer + constexpr uint16_t VP_T_E1_Set = 0x200B; // 2 Byte Integer + constexpr uint16_t VP_T_E2_Is = 0x2010; // 4 Byte Integer + constexpr uint16_t VP_T_E2_Set = 0x2014; // 2 Byte Integer + constexpr uint16_t VP_T_E3_Is = 0x2018; // 4 Byte Integer + constexpr uint16_t VP_T_E3_Set = 0x201B; // 2 Byte Integer + constexpr uint16_t VP_T_E4_Is = 0x2020; // 4 Byte Integer + constexpr uint16_t VP_T_E4_Set = 0x2024; // 2 Byte Integer + constexpr uint16_t VP_T_E5_Is = 0x2028; // 4 Byte Integer + constexpr uint16_t VP_T_E5_Set = 0x202B; // 2 Byte Integer + constexpr uint16_t VP_T_E6_Is = 0x2030; // 4 Byte Integer + constexpr uint16_t VP_T_E6_Set = 0x2034; // 2 Byte Integer + constexpr uint16_t VP_T_E7_Is = 0x2038; // 4 Byte Integer + constexpr uint16_t VP_T_E7_Set = 0x203B; // 2 Byte Integer + + constexpr uint16_t VP_T_Bed_Is = 0x2040; // 4 Byte Integer + constexpr uint16_t VP_T_Bed_Set = 0x2044; // 2 Byte Integer + + constexpr uint16_t VP_Min_EX_T_E = 0x2100; + + constexpr uint16_t VP_Flowrate_E0 = 0x2200; // 2 Byte Integer + constexpr uint16_t VP_Flowrate_E1 = 0x2202; // 2 Byte Integer + constexpr uint16_t VP_Flowrate_E2 = 0x2204; + constexpr uint16_t VP_Flowrate_E3 = 0x2206; + constexpr uint16_t VP_Flowrate_E4 = 0x2208; + constexpr uint16_t VP_Flowrate_E5 = 0x220A; + constexpr uint16_t VP_Flowrate_E6 = 0x220C; + constexpr uint16_t VP_Flowrate_E7 = 0x220E; + + // Move + constexpr uint16_t VP_MOVE_X = 0x2300; + constexpr uint16_t VP_MOVE_Y = 0x2302; + constexpr uint16_t VP_MOVE_Z = 0x2304; + constexpr uint16_t VP_MOVE_E0 = 0x2310; + constexpr uint16_t VP_MOVE_E1 = 0x2312; + constexpr uint16_t VP_MOVE_E2 = 0x2314; + constexpr uint16_t VP_MOVE_E3 = 0x2316; + constexpr uint16_t VP_MOVE_E4 = 0x2318; + constexpr uint16_t VP_MOVE_E5 = 0x231A; + constexpr uint16_t VP_MOVE_E6 = 0x231C; + constexpr uint16_t VP_MOVE_E7 = 0x231E; + constexpr uint16_t VP_HOME_ALL = 0x2320; + constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2330; + constexpr uint16_t VP_MOVE_DISTANCE = 0x2334; + constexpr uint16_t VP_X_HOME = 0x2336; + constexpr uint16_t VP_Y_HOME = 0x2338; + constexpr uint16_t VP_Z_HOME = 0x233A; + + // Fan Control Buttons , switch between "off" and "on" + constexpr uint16_t VP_FAN0_CONTROL = 0x2350; + constexpr uint16_t VP_FAN1_CONTROL = 0x2352; + constexpr uint16_t VP_FAN2_CONTROL = 0x2354; + constexpr uint16_t VP_FAN3_CONTROL = 0x2356; + constexpr uint16_t VP_FAN4_CONTROL = 0x2358; + constexpr uint16_t VP_FAN5_CONTROL = 0x235A; + + constexpr uint16_t VP_LANGUAGE_CHANGE = 0x2380; + constexpr uint16_t VP_LANGUAGE_CHANGE1 = 0x2382; + constexpr uint16_t VP_LANGUAGE_CHANGE2 = 0x2384; + constexpr uint16_t VP_LANGUAGE_CHANGE3 = 0x2386; + constexpr uint16_t VP_LANGUAGE_CHANGE4 = 0x2388; + constexpr uint16_t VP_LANGUAGE_CHANGE5 = 0x238A; + + // LEVEL + constexpr uint16_t VP_LEVEL_POINT = 0x2400; + constexpr uint16_t VP_MESH_LEVEL_POINT = 0x2410; + constexpr uint16_t VP_MESH_LEVEL_ADJUST = 0x2412; + constexpr uint16_t VP_MESH_LEVEL_DIP = 0x2414; + constexpr uint16_t VP_MESH_LEVEL_POINT_X = 0x2416; + constexpr uint16_t VP_MESH_LEVEL_POINT_Y = 0x2418; + constexpr uint16_t VP_LEVEL_BUTTON = 0x2420; + constexpr uint16_t VP_MESH_LEVEL_POINT_DIS = 0x2422; + constexpr uint16_t VP_MESH_LEVEL_BACK = 0x2424; + + constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2500; + constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2504; + constexpr uint16_t VP_LOAD_Filament = 0x2508; + // constexpr uint16_t VP_LOAD_UNLOAD_Cancle = 0x250A; + constexpr uint16_t VP_UNLOAD_Filament = 0x250B; + constexpr uint16_t VP_Filament_distance = 0x2600; + constexpr uint16_t VP_Filament_speed = 0x2604; + constexpr uint16_t VP_MIN_EX_T = 0x2606; + + constexpr uint16_t VP_E1_Filament_distance = 0x2614; + constexpr uint16_t VP_E1_Filament_speed = 0x2616; + constexpr uint16_t VP_E1_MIN_EX_T = 0x2618; + + constexpr uint16_t VP_Fan0_Percentage = 0x2700; // 2 Byte Integer (0..100) + constexpr uint16_t VP_Fan1_Percentage = 0x2702; // 2 Byte Integer (0..100) + constexpr uint16_t VP_Fan2_Percentage = 0x2704; // 2 Byte Integer (0..100) + constexpr uint16_t VP_Fan3_Percentage = 0x2706; // 2 Byte Integer (0..100) + constexpr uint16_t VP_Feedrate_Percentage = 0x2708; // 2 Byte Integer (0..100) + + // Fan status + constexpr uint16_t VP_FAN0_STATUS = 0x2710; + constexpr uint16_t VP_FAN1_STATUS = 0x2712; + constexpr uint16_t VP_FAN2_STATUS = 0x2714; + constexpr uint16_t VP_FAN3_STATUS = 0x2716; + + // Step per mm + constexpr uint16_t VP_X_STEP_PER_MM = 0x2900; // at the moment , 2 byte unsigned int , 0~1638.4 + constexpr uint16_t VP_Y_STEP_PER_MM = 0x2904; + constexpr uint16_t VP_Z_STEP_PER_MM = 0x2908; + constexpr uint16_t VP_E0_STEP_PER_MM = 0x2910; + constexpr uint16_t VP_E1_STEP_PER_MM = 0x2912; + constexpr uint16_t VP_E2_STEP_PER_MM = 0x2914; + constexpr uint16_t VP_E3_STEP_PER_MM = 0x2916; + constexpr uint16_t VP_E4_STEP_PER_MM = 0x2918; + constexpr uint16_t VP_E5_STEP_PER_MM = 0x291A; + constexpr uint16_t VP_E6_STEP_PER_MM = 0x291C; + constexpr uint16_t VP_E7_STEP_PER_MM = 0x291E; + + constexpr uint16_t VP_X_MAX_SPEED = 0x2A00; + constexpr uint16_t VP_Y_MAX_SPEED = 0x2A04; + constexpr uint16_t VP_Z_MAX_SPEED = 0x2A08; + constexpr uint16_t VP_E0_MAX_SPEED = 0x2A0C; + constexpr uint16_t VP_E1_MAX_SPEED = 0x2A10; + + constexpr uint16_t VP_X_ACC_MAX_SPEED = 0x2A28; + constexpr uint16_t VP_Y_ACC_MAX_SPEED = 0x2A2C; + constexpr uint16_t VP_Z_ACC_MAX_SPEED = 0x2A30; + constexpr uint16_t VP_E0_ACC_MAX_SPEED = 0x2A34; + constexpr uint16_t VP_E1_ACC_MAX_SPEED = 0x2A38; + + constexpr uint16_t VP_TRAVEL_SPEED = 0x2A3C; + constexpr uint16_t VP_FEEDRATE_MIN_SPEED = 0x2A40; + constexpr uint16_t VP_T_F_SPEED = 0x2A44; + constexpr uint16_t VP_ACC_SPEED = 0x2A48; + + /* -------------------------------0x3000-0x3FFF------------------------------- */ + // Buttons on the SD-Card File listing. + constexpr uint16_t VP_SD_ScrollEvent = 0x3020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down + constexpr uint16_t VP_SD_FileSelected = 0x3022; // Number of file field selected. + constexpr uint16_t VP_SD_FileSelectConfirm = 0x3024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) + constexpr uint16_t VP_SD_ResumePauseAbort = 0x3026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints + constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x3028; // Abort print confirmation (virtual, will be injected by the confirm dialog) + constexpr uint16_t VP_SD_Print_Setting = 0x3040; + constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x3050; // Data: 0 down, 1 up + constexpr uint16_t VP_SD_Print_LiveAdjustZ_Confirm = 0x3060; + constexpr uint16_t VP_ZOffset_Distance = 0x3070; + constexpr uint16_t VP_ZOffset_DE_DIS = 0x3080; + // SDCard File Listing + constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. + constexpr uint16_t DGUS_SD_FILESPERSCREEN = 10; // FIXME move that info to the display and read it from there. + constexpr uint16_t VP_SD_FileName0 = 0x3100; + constexpr uint16_t VP_SD_FileName1 = 0x3120; + constexpr uint16_t VP_SD_FileName2 = 0x3140; + constexpr uint16_t VP_SD_FileName3 = 0x3160; + constexpr uint16_t VP_SD_FileName4 = 0x3180; + constexpr uint16_t VP_SD_FileName5 = 0x31A0; + constexpr uint16_t VP_SD_FileName6 = 0x31C0; + constexpr uint16_t VP_SD_FileName7 = 0x31E0; + constexpr uint16_t VP_SD_FileName8 = 0x3200; + constexpr uint16_t VP_SD_FileName9 = 0x3220; + + constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; + constexpr uint16_t VP_SD_Print_Baby = 0x32B0; + constexpr uint16_t VP_SD_Print_Filename = 0x32C0; + + // X Y Z Point + constexpr uint16_t VP_XPos = 0x3300; // 4 Byte Fixed point number; format xxx.yy + constexpr uint16_t VP_YPos = 0x3302; // 4 Byte Fixed point number; format xxx.yy + constexpr uint16_t VP_ZPos = 0x3304; // 4 Byte Fixed point number; format xxx.yy + constexpr uint16_t VP_EPos = 0x3306; // 4 Byte Fixed point number; format xxx.yy + + // Print + constexpr uint16_t VP_PrintProgress_Percentage = 0x3330; // 2 Byte Integer (0..100) + constexpr uint16_t VP_PrintTime = 0x3340; + constexpr uint16_t VP_PrintTime_LEN = 32; + constexpr uint16_t VP_PrintAccTime = 0x3360; + constexpr uint16_t VP_PrintAccTime_LEN = 32; + constexpr uint16_t VP_PrintsTotal = 0x3380; + constexpr uint16_t VP_PrintsTotal_LEN = 16; + + constexpr uint16_t VP_File_Pictutr0 = 0x3400; + constexpr uint16_t VP_File_Pictutr1 = 0x3402; + constexpr uint16_t VP_File_Pictutr2 = 0x3404; + constexpr uint16_t VP_File_Pictutr3 = 0x3406; + constexpr uint16_t VP_File_Pictutr4 = 0x3408; + constexpr uint16_t VP_File_Pictutr5 = 0x340A; + constexpr uint16_t VP_File_Pictutr6 = 0x340C; + constexpr uint16_t VP_File_Pictutr7 = 0x340E; + constexpr uint16_t VP_File_Pictutr8 = 0x3410; + constexpr uint16_t VP_File_Pictutr9 = 0x3412; + + constexpr uint16_t VP_BED_STATUS = 0x341C; + + constexpr uint16_t VP_TMC_X_STEP = 0x3430; + constexpr uint16_t VP_TMC_Y_STEP = 0x3432; + constexpr uint16_t VP_TMC_Z_STEP = 0x3434; + + constexpr uint16_t VP_TMC_X1_Current = 0x3436; + constexpr uint16_t VP_TMC_Y1_Current = 0x3438; + constexpr uint16_t VP_TMC_X_Current = 0x343A; + constexpr uint16_t VP_TMC_Y_Current = 0x343C; + constexpr uint16_t VP_TMC_Z_Current = 0x343E; + constexpr uint16_t VP_TMC_E0_Current = 0x3440; + constexpr uint16_t VP_TMC_E1_Current = 0x3442; + constexpr uint16_t VP_TMC_Z1_Current = 0x3444; + + + constexpr uint16_t VP_PrintTime_H = 0x3500; + constexpr uint16_t VP_PrintTime_M = 0x3502; + constexpr uint16_t VP_PrintTime_S = 0x3504; + + // PIDs + constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4 + constexpr uint16_t VP_E0_PID_I = 0x3702; + constexpr uint16_t VP_E0_PID_D = 0x3704; + constexpr uint16_t VP_E1_PID_P = 0x3706; // at the moment , 2 byte unsigned int , 0~1638.4 + constexpr uint16_t VP_E1_PID_I = 0x3708; + constexpr uint16_t VP_E1_PID_D = 0x370A; + constexpr uint16_t VP_BED_PID_P = 0x3710; + constexpr uint16_t VP_BED_PID_I = 0x3712; + constexpr uint16_t VP_BED_PID_D = 0x3714; + + constexpr uint16_t VP_EEPROM_CTRL = 0x3720; + + constexpr uint16_t VP_OFFSET_X = 0x3724; + constexpr uint16_t VP_OFFSET_Y = 0x3728; + constexpr uint16_t VP_OFFSET_Z = 0x372B; + + // PID autotune + constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x3800; + constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x3802; + constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x3804; + constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x3806; + constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x3808; + constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x380A; + constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x380C; + // Calibrate Z + constexpr uint16_t VP_Z_CALIBRATE = 0x3810; + + constexpr uint16_t VP_AutoTurnOffSw = 0x3812; + constexpr uint16_t VP_LCD_BLK = 0x3814; + + constexpr uint16_t VP_X_PARK_POS = 0x3900; + constexpr uint16_t VP_Y_PARK_POS = 0x3902; + constexpr uint16_t VP_Z_PARK_POS = 0x3904; + + /* -------------------------------0x4000-0x4FFF------------------------------- */ + // Heater Control Buttons , triged between "cool down" and "heat PLA" state + constexpr uint16_t VP_E0_CONTROL = 0x4010; + constexpr uint16_t VP_E1_CONTROL = 0x4012; + //constexpr uint16_t VP_E2_CONTROL = 0x2214; + //constexpr uint16_t VP_E3_CONTROL = 0x2216; + //constexpr uint16_t VP_E4_CONTROL = 0x2218; + //constexpr uint16_t VP_E5_CONTROL = 0x221A; + constexpr uint16_t VP_BED_CONTROL = 0x401C; + + // Preheat + constexpr uint16_t VP_E0_BED_PREHEAT = 0x4020; + constexpr uint16_t VP_E1_BED_PREHEAT = 0x4022; + //constexpr uint16_t VP_E2_BED_PREHEAT = 0x4024; + //constexpr uint16_t VP_E3_BED_PREHEAT = 0x4026; + //constexpr uint16_t VP_E4_BED_PREHEAT = 0x4028; + //constexpr uint16_t VP_E5_BED_PREHEAT = 0x402A; + + // Filament load and unload + // constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x4030; + // constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x4032; + + // Settings store , reset + + // Level data + constexpr uint16_t VP_Level_Point_One_X = 0x4100; + constexpr uint16_t VP_Level_Point_One_Y = 0x4102; + constexpr uint16_t VP_Level_Point_Two_X = 0x4104; + constexpr uint16_t VP_Level_Point_Two_Y = 0x4106; + constexpr uint16_t VP_Level_Point_Three_X = 0x4108; + constexpr uint16_t VP_Level_Point_Three_Y = 0x410A; + constexpr uint16_t VP_Level_Point_Four_X = 0x410C; + constexpr uint16_t VP_Level_Point_Four_Y = 0x410E; + constexpr uint16_t VP_Level_Point_Five_X = 0x4110; + constexpr uint16_t VP_Level_Point_Five_Y = 0x4112; + + + /* H43 Version */ + constexpr uint16_t VP_MKS_H43_VERSION = 0x4A00; // MKS H43 V1.0.0 + constexpr uint16_t VP_MKS_H43_VERSION_LEN = 16; + constexpr uint16_t VP_MKS_H43_UpdataVERSION = 0x4A10; // MKS H43 V1.0.0 + constexpr uint16_t VP_MKS_H43_UpdataVERSION_LEN = 16; + + /* -------------------------------0x5000-0xFFFF------------------------------- */ + constexpr uint16_t VP_HOME_Dis = 0x5000; + constexpr uint16_t VP_Setting_Dis = 0x5010; + constexpr uint16_t VP_Tool_Dis = 0x5020; + constexpr uint16_t VP_Printing_Dis = 0x5030; + + constexpr uint16_t VP_Language_Dis = 0x5080; + constexpr uint16_t VP_LossPoint_Dis = 0x5090; + + constexpr uint16_t VP_PrintPauseConfig_Dis = 0x5120; + constexpr uint16_t VP_MotorPluse_Dis = 0x5140; + constexpr uint16_t VP_MotorMaxSpeed_Dis = 0x5150; + constexpr uint16_t VP_MotorMaxAcc_Dis = 0x5160; + + constexpr uint16_t VP_X_Pluse_Dis = 0x5170; + constexpr uint16_t VP_Y_Pluse_Dis = 0x5180; + constexpr uint16_t VP_Z_Pluse_Dis = 0x5190; + constexpr uint16_t VP_E0_Pluse_Dis = 0x51A0; + constexpr uint16_t VP_E1_Pluse_Dis = 0x51B0; + + constexpr uint16_t VP_X_Max_Speed_Dis = 0x5280; + constexpr uint16_t VP_Y_Max_Speed_Dis = 0x5290; + constexpr uint16_t VP_Z_Max_Speed_Dis = 0x52A0; + constexpr uint16_t VP_E0_Max_Speed_Dis = 0x52B0; + constexpr uint16_t VP_E1_Max_Speed_Dis = 0x52C0; + + constexpr uint16_t VP_X_Max_Acc_Speed_Dis = 0x51E0; + constexpr uint16_t VP_Y_Max_Acc_Speed_Dis = 0x51F0; + constexpr uint16_t VP_Z_Max_Acc_Speed_Dis = 0x5200; + constexpr uint16_t VP_E0_Max_Acc_Speed_Dis = 0x5210; + constexpr uint16_t VP_E1_Max_Acc_Speed_Dis = 0x5220; + + + constexpr uint16_t VP_PrintTime_Dis = 0x5470; + constexpr uint16_t VP_E0_Temp_Dis = 0x5310; + constexpr uint16_t VP_E1_Temp_Dis = 0x5320; + constexpr uint16_t VP_HB_Temp_Dis = 0x5330; + constexpr uint16_t VP_Feedrate_Dis = 0x5350; + constexpr uint16_t VP_PrintAcc_Dis = 0x5340; + constexpr uint16_t VP_Fan_Speed_Dis = 0x5360; + + constexpr uint16_t VP_Min_Ex_Temp_Dis = 0x5380; + + + constexpr uint16_t VP_X_PARK_POS_Dis = 0x53E0; + constexpr uint16_t VP_Y_PARK_POS_Dis = 0x53F0; + constexpr uint16_t VP_Z_PARK_POS_Dis = 0x5400; + + + constexpr uint16_t VP_TravelAcc_Dis = 0x5440; + constexpr uint16_t VP_FeedRateMin_Dis = 0x5450; + constexpr uint16_t VP_TravelFeeRateMin_Dis = 0x5460; + constexpr uint16_t VP_ACC_Dis = 0x5480; + + constexpr uint16_t VP_Extrusion_Dis = 0x5230; + constexpr uint16_t VP_HeatBed_Dis = 0x5240; + + constexpr uint16_t VP_Printting_Dis = 0x5430; + constexpr uint16_t VP_FactoryDefaults_Dis = 0x54C0; + constexpr uint16_t VP_StoreSetting_Dis = 0x54B0; + constexpr uint16_t VP_Info_EEPROM_2_Dis = 0x54D0; + constexpr uint16_t VP_Info_EEPROM_1_Dis = 0x54E0; + + constexpr uint16_t VP_AutoLevel_1_Dis = 0x55F0; + + constexpr uint16_t VP_TMC_X_Step_Dis = 0x5530; + constexpr uint16_t VP_TMC_Y_Step_Dis = 0x5540; + constexpr uint16_t VP_TMC_Z_Step_Dis = 0x5550; + constexpr uint16_t VP_TMC_X1_Current_Dis = 0x5560; + constexpr uint16_t VP_TMC_Y1_Current_Dis = 0x5570; + constexpr uint16_t VP_TMC_X_Current_Dis = 0x5580; + constexpr uint16_t VP_TMC_Y_Current_Dis = 0x5590; + constexpr uint16_t VP_TMC_Z_Current_Dis = 0x55A0; + constexpr uint16_t VP_TMC_E0_Current_Dis = 0x55B0; + constexpr uint16_t VP_TMC_E1_Current_Dis = 0x55C0; + constexpr uint16_t VP_TMC_Z1_Current_Dis = 0x55E0; + + constexpr uint16_t VP_AutoLEVEL_INFO1 = 0x5600; + constexpr uint16_t VP_EX_TEMP_INFO1_Dis = 0x5610; + constexpr uint16_t VP_EX_TEMP_INFO2_Dis = 0x5620; + constexpr uint16_t VP_EX_TEMP_INFO3_Dis = 0x5630; + constexpr uint16_t VP_LCD_BLK_Dis = 0x56A0; + constexpr uint16_t VP_Info_PrinfFinsh_1_Dis = 0x5C00; + constexpr uint16_t VP_Info_PrinfFinsh_2_Dis = 0x5C10; + + constexpr uint16_t VP_Length_Dis = 0x5B00; + + constexpr uint16_t VP_PrintConfrim_Info_Dis = 0x5B90; + constexpr uint16_t VP_StopPrintConfrim_Info_Dis = 0x5B80; + + constexpr uint16_t VP_Point_One_Dis = 0x5BA0; + constexpr uint16_t VP_Point_Two_Dis = 0x5BB0; + constexpr uint16_t VP_Point_Three_Dis = 0x5BC0; + constexpr uint16_t VP_Point_Four_Dis = 0x5BD0; + constexpr uint16_t VP_Point_Five_Dis = 0x5BE0; + + constexpr uint16_t VP_Print_Dis = 0x5250; + + constexpr uint16_t VP_About_Dis = 0x5A00; + constexpr uint16_t VP_Config_Dis = 0x5A10; + constexpr uint16_t VP_Filament_Dis = 0x5A20; + constexpr uint16_t VP_Move_Dis = 0x5A30; + constexpr uint16_t VP_Level_Dis = 0x5A50; + constexpr uint16_t VP_Speed_Dis = 0x5A70; + constexpr uint16_t VP_InOut_Dis = 0x5A80; + + constexpr uint16_t VP_MotorConfig_Dis = 0x5100; + constexpr uint16_t VP_LevelConfig_Dis = 0x5110; + constexpr uint16_t VP_Advance_Dis = 0x5130; + constexpr uint16_t VP_TemperatureConfig_Dis = 0x5390; + +#endif // MKS_FINSH diff --git a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp new file mode 100644 index 0000000000..0fef87b64c --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp @@ -0,0 +1,2109 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_MKS) + +#include "../DGUSScreenHandler.h" + +#include "../../../../../MarlinCore.h" +#include "../../../../../gcode/queue.h" +#include "../../../../../libs/duration_t.h" +#include "../../../../../module/settings.h" +#include "../../../../../module/temperature.h" +#include "../../../../../module/motion.h" +#include "../../../../../module/planner.h" +#include "../../../../../module/printcounter.h" +#include "../../../../../sd/cardreader.h" + +#include "../../../../../gcode/gcode.h" +#include "../../../../../pins/pins.h" +#include "../../../../../libs/nozzle.h" +#if ENABLED(HAS_STEALTHCHOP) + #include "../../../../../module/stepper/trinamic.h" + #include "../../../../../module/stepper/indirection.h" +#endif +#include "../../../../../module/probe.h" + +#if ENABLED(POWER_LOSS_RECOVERY) + #include "../../../../../feature/powerloss.h" +#endif + +bool DGUSAutoTurnOff = false; +uint8_t DGUSLanguageSwitch = 0; // Switch language for MKS DGUS + +// endianness swap +uint32_t swap32(const uint32_t value) { return (value & 0x000000FFU) << 24U | (value & 0x0000FF00U) << 8U | (value & 0x00FF0000U) >> 8U | (value & 0xFF000000U) >> 24U; } + +void DGUSScreenHandler::sendinfoscreen_ch_mks(const uint16_t* line1, const uint16_t* line2, const uint16_t* line3, const uint16_t* line4) { + dgusdisplay.WriteVariable(VP_MSGSTR1, line1, 32, true); + dgusdisplay.WriteVariable(VP_MSGSTR2, line2, 32, true); + dgusdisplay.WriteVariable(VP_MSGSTR3, line3, 32, true); + dgusdisplay.WriteVariable(VP_MSGSTR4, line4, 32, true); +} + +void DGUSScreenHandler::sendinfoscreen_en_mks(const char* line1, const char* line2, const char* line3, const char* line4) { + dgusdisplay.WriteVariable(VP_MSGSTR1, line1, 32, true); + dgusdisplay.WriteVariable(VP_MSGSTR2, line2, 32, true); + dgusdisplay.WriteVariable(VP_MSGSTR3, line3, 32, true); + dgusdisplay.WriteVariable(VP_MSGSTR4, line4, 32, true); +} + +void DGUSScreenHandler::sendinfoscreen_mks(const void* line1, const void* line2, const void* line3, const void* line4, uint16_t language) { + if (language == MKS_English) + DGUSScreenHandler::sendinfoscreen_en_mks((char *)line1, (char *)line2, (char *)line3, (char *)line4); + else if (language == MKS_SimpleChinese) + DGUSScreenHandler::sendinfoscreen_ch_mks((uint16_t *)line1, (uint16_t *)line2, (uint16_t *)line3, (uint16_t *)line4); +} + +void DGUSScreenHandler::DGUSLCD_SendFanToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + //DEBUG_ECHOPAIR(" DGUS_LCD_SendWordValueToDisplay ", var.VP); + //DEBUG_ECHOLNPAIR(" data ", *(uint16_t *)var.memadr); + uint16_t tmp = *(uint8_t *) var.memadr; // +1 -> avoid rounding issues for the display. + // tmp = map(tmp, 0, 255, 0, 100); + dgusdisplay.WriteVariable(var.VP, tmp); + } +} + +void DGUSScreenHandler::DGUSLCD_SendBabyStepToDisplay_MKS(DGUS_VP_Variable &var) { + float value = current_position.z; + DEBUG_ECHOLNPAIR_F(" >> ", value, 6); + value *= cpow(10, 2); + dgusdisplay.WriteVariable(VP_SD_Print_Baby, (uint16_t)value); +} + +void DGUSScreenHandler::DGUSLCD_SendPrintTimeToDisplay_MKS(DGUS_VP_Variable &var) { + duration_t elapsed = print_job_timer.duration(); + uint32_t time = elapsed.value; + dgusdisplay.WriteVariable(VP_PrintTime_H, uint16_t(time / 3600)); + dgusdisplay.WriteVariable(VP_PrintTime_M, uint16_t(time % 3600 / 60)); + dgusdisplay.WriteVariable(VP_PrintTime_S, uint16_t((time % 3600) % 60)); +} + +void DGUSScreenHandler::DGUSLCD_SetUint8(DGUS_VP_Variable &var, void *val_ptr) { + if (var.memadr) { + uint16_t value = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("FAN value get:", value); + *(uint8_t*)var.memadr = map(constrain(value, 0, 255), 0, 255, 0, 255); + DEBUG_ECHOLNPAIR("FAN value change:", *(uint8_t*)var.memadr); + } +} + +void DGUSScreenHandler::DGUSLCD_SendGbkToDisplay(DGUS_VP_Variable &var) { + DEBUG_ECHOLNPAIR(" data ", *(uint16_t *)var.memadr); + uint16_t *tmp = (uint16_t*) var.memadr; + dgusdisplay.WriteVariable(var.VP, tmp, var.size, true); +} + +void DGUSScreenHandler::DGUSLCD_SendStringToDisplay_Language_MKS(DGUS_VP_Variable &var) { + if (DGUSLanguageSwitch == MKS_English) { + char *tmp = (char*) var.memadr; + dgusdisplay.WriteVariable(var.VP, tmp, var.size, true); + } + else if (DGUSLanguageSwitch == MKS_SimpleChinese) { + uint16_t *tmp = (uint16_t *)var.memadr; + dgusdisplay.WriteVariable(var.VP, tmp, var.size, true); + } +} + +void DGUSScreenHandler::DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var) { + #if ENABLED(SENSORLESS_HOMING) + #if AXIS_HAS_STEALTHCHOP(X) + tmc_x_step = stepperX.homing_threshold(); + dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr); + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + tmc_y_step = stepperY.homing_threshold(); + dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr); + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + tmc_z_step = stepperZ.homing_threshold(); + dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr); + #endif + #endif +} + +#if ENABLED(SDSUPPORT) + + void DGUSScreenHandler::DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t touched_nr = (int16_t)swap16(*(uint16_t*)val_ptr) + top_file; + if (touched_nr != 0x0F && touched_nr > filelist.count()) return; + if (!filelist.seek(touched_nr) && touched_nr != 0x0F) return; + + if (touched_nr == 0x0F) { + if (filelist.isAtRootDir()) + GotoScreen(DGUSLCD_SCREEN_MAIN); + else + filelist.upDir(); + return; + } + + if (filelist.isDir()) { + filelist.changeDir(filelist.filename()); + top_file = 0; + ForceCompleteUpdate(); + return; + } + + #if ENABLED(DGUS_PRINT_FILENAME) + // Send print filename + dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), VP_SD_FileName_LEN, true); + #endif + + // Setup Confirmation screen + file_to_print = touched_nr; + GotoScreen(MKSLCD_SCREEN_PRINT_CONFIRM); + } + + void DGUSScreenHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) { + if (!filelist.seek(file_to_print)) return; + ExtUI::printFile(filelist.shortFilename()); + GotoScreen(MKSLCD_SCREEN_PRINT); + z_offset_add = 0; + } + + void DGUSScreenHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) { + + if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes. + switch (swap16(*(uint16_t*)val_ptr)) { + case 0: { // Resume + + auto cs = getCurrentScreen(); + if (runout_mks.runout_status != RUNOUT_WAITTING_STATUS && runout_mks.runout_status != UNRUNOUT_STATUS) { + if (cs == MKSLCD_SCREEN_PRINT || cs == MKSLCD_SCREEN_PAUSE) + GotoScreen(MKSLCD_SCREEN_PAUSE); + return; + } + else + runout_mks.runout_status = UNRUNOUT_STATUS; + + GotoScreen(MKSLCD_SCREEN_PRINT); + + if (ExtUI::isPrintingFromMediaPaused()) { + nozzle_park_mks.print_pause_start_flag = 0; + nozzle_park_mks.blstatus = true; + ExtUI::resumePrint(); + } + } break; + + case 1: // Pause + + GotoScreen(MKSLCD_SCREEN_PAUSE); + if (!ExtUI::isPrintingFromMediaPaused()) { + nozzle_park_mks.print_pause_start_flag = 1; + nozzle_park_mks.blstatus = true; + ExtUI::pausePrint(); + //ExtUI::mks_pausePrint(); + } + break; + case 2: // Abort + HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true); + break; + } + } + + void DGUSScreenHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) { + uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN; + if (target_line > DGUS_SD_FILESPERSCREEN) return; + char tmpfilename[VP_SD_FileName_LEN + 1] = ""; + var.memadr = (void*)tmpfilename; + + uint16_t dir_icon_val = 25; + if (filelist.seek(top_file + target_line)) { + snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s%c"), filelist.filename(), filelist.isDir() ? '/' : 0); // snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s"), filelist.filename()); + dir_icon_val = filelist.isDir() ? 0 : 1; + } + DGUSLCD_SendStringToDisplay(var); + + dgusdisplay.WriteVariable(VP_File_Pictutr0 + target_line * 2, dir_icon_val); + } + + void DGUSScreenHandler::SDCardInserted() { + top_file = 0; + filelist.refresh(); + auto cs = getCurrentScreen(); + if (cs == DGUSLCD_SCREEN_MAIN || cs == DGUSLCD_SCREEN_STATUS) + GotoScreen(MKSLCD_SCREEN_CHOOSE_FILE); + } + + void DGUSScreenHandler::SDCardRemoved() { + if (current_screen == DGUSLCD_SCREEN_SDFILELIST + || (current_screen == DGUSLCD_SCREEN_CONFIRM && (ConfirmVP == VP_SD_AbortPrintConfirmed || ConfirmVP == VP_SD_FileSelectConfirm)) + || current_screen == DGUSLCD_SCREEN_SDPRINTMANIPULATION + ) filelist.refresh(); + } + + void DGUSScreenHandler::SDPrintingFinished() { + if (DGUSAutoTurnOff) { + while (queue.length) queue.advance(); + gcode.process_subcommands_now_P(PSTR("M81")); + } + GotoScreen(MKSLCD_SCREEN_PrintDone); + } + +#endif // SDSUPPORT + +void DGUSScreenHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr) { + uint8_t *tmp = (uint8_t*)val_ptr; + + // The keycode in target is coded as , so 0x0100A means + // from screen 1 (main) to 10 (temperature). DGUSLCD_SCREEN_POPUP is special, + // meaning "return to previous screen" + DGUSLCD_Screens target = (DGUSLCD_Screens)tmp[1]; + + DEBUG_ECHOLNPAIR("\n DEBUG target", target); + + // when the dgus had reboot, it will enter the DGUSLCD_SCREEN_MAIN page, + // so user can change any page to use this function, an it will check + // if robin nano is printing. when it is, dgus will enter the printing + // page to continue print; + // + //if (print_job_timer.isRunning() || print_job_timer.isPaused()) { + // if (target == MKSLCD_PAUSE_SETTING_MOVE || target == MKSLCD_PAUSE_SETTING_EX + // || target == MKSLCD_SCREEN_PRINT || target == MKSLCD_SCREEN_PAUSE + // ) { + // } + // else + // GotoScreen(MKSLCD_SCREEN_PRINT); + // return; + //} + + if (target == DGUSLCD_SCREEN_POPUP) { + SetupConfirmAction(ExtUI::setUserConfirmed); + + // Special handling for popup is to return to previous menu + if (current_screen == DGUSLCD_SCREEN_POPUP && confirm_action_cb) confirm_action_cb(); + PopToOldScreen(); + return; + } + + UpdateNewScreen(target); + + #ifdef DEBUG_DGUSLCD + if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", target); + #endif +} + +void DGUSScreenHandler::ScreenBackChange(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t target = swap16(*(uint16_t *)val_ptr); + DEBUG_ECHOLNPAIR(" back = 0x%x", target); + switch (target) { + } +} + +void DGUSScreenHandler::ZoffsetConfirm(DGUS_VP_Variable &var, void *val_ptr) { + settings.save(); + if (print_job_timer.isRunning()) + GotoScreen(MKSLCD_SCREEN_PRINT); + else if (print_job_timer.isPaused) + GotoScreen(MKSLCD_SCREEN_PAUSE); +} + +void DGUSScreenHandler::GetTurnOffCtrl(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("ctrl turn off\n"); + uint16_t value = swap16(*(uint16_t *)val_ptr); + switch (value) { + case 0 ... 1: DGUSAutoTurnOff = (bool)value; break; + default: break; + } +} + +void DGUSScreenHandler::GetMinExtrudeTemp(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("MinExtrudeTempChange DistanceChange"); + uint16_t value = swap16(*(uint16_t *)val_ptr); + thermalManager.extrude_min_temp = value; + min_ex_temp = value; + settings.save(); +} + +void DGUSScreenHandler::GetZoffsetDistance(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("Zoffset DistanceChange"); + uint16_t value = swap16(*(uint16_t *)val_ptr); + float val_distance = 0; + switch (value) { + case 0: val_distance = 0.01; break; + case 1: val_distance = 0.1; break; + case 2: val_distance = 0.5; break; + case 3: val_distance = 1; break; + default: val_distance = 0.01; break; + } + ZOffset_distance = val_distance; +} + +void DGUSScreenHandler::GetManualMovestep(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("\nMove DistanceChange"); + *(uint16_t *)var.memadr = swap16(*(uint16_t *)val_ptr); +} + +void DGUSScreenHandler::EEPROM_CTRL(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t eep_flag = swap16(*(uint16_t *)val_ptr); + switch (eep_flag) { + case 0: + settings.save(); + settings.load(); // load eeprom data to check the data is right + GotoScreen(MKSLCD_SCREEN_EEP_Config); + break; + + case 1: + settings.reset(); + GotoScreen(MKSLCD_SCREEN_EEP_Config); + break; + + default: break; + } +} + +void DGUSScreenHandler::Z_offset_select(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t z_value = swap16(*(uint16_t *)val_ptr); + switch (z_value) { + case 0: Z_distance = 0.01; break; + case 1: Z_distance = 0.1; break; + case 2: Z_distance = 0.5; break; + default: Z_distance = 1; break; + } +} + +void DGUSScreenHandler::GetOffsetValue(DGUS_VP_Variable &var, void *val_ptr) { + + #if ENABLED(HAS_BED_PROBE) + int32_t value = swap32(*(int32_t *)val_ptr); + float Offset = value / 100.0f; + DEBUG_ECHOLNPAIR_F("\nget int6 offset >> ", value, 6); + #endif + + switch (var.VP) { + case VP_OFFSET_X: TERN_(HAS_BED_PROBE, probe.offset.x = Offset); break; + case VP_OFFSET_Y: TERN_(HAS_BED_PROBE, probe.offset.y = Offset); break; + case VP_OFFSET_Z: TERN_(HAS_BED_PROBE, probe.offset.z = Offset); break; + default: break; + } + settings.save(); +} + +void DGUSScreenHandler::LanguageChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t lag_flag = swap16(*(uint16_t *)val_ptr); + switch (lag_flag) { + case MKS_SimpleChinese: + DGUS_LanguageDisplay(MKS_SimpleChinese); + DGUSLanguageSwitch = MKS_SimpleChinese; + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_Choose); + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_NoChoose); + settings.save(); + break; + case MKS_English: + DGUS_LanguageDisplay(MKS_English); + DGUSLanguageSwitch = MKS_English; + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_NoChoose); + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_Choose); + settings.save(); + break; + default: break; + } +} + +#if ENABLED(MESH_BED_LEVELING) + uint8_t mesh_point_count = GRID_MAX_POINTS; +#endif + +void DGUSScreenHandler::Level_Ctrl_MKS(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t lev_but = swap16(*(uint16_t *)val_ptr); + #if ENABLED(MESH_BED_LEVELING) + auto cs = getCurrentScreen(); + #endif + switch (lev_but) { + case 0: + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + static uint8_t a_first_level = 1; + if (a_first_level == 1) { + a_first_level = 0; + queue.enqueue_now_P(G28_STR); + } + queue.enqueue_now_P(PSTR("G29")); + + #elif ENABLED(MESH_BED_LEVELING) + + mesh_point_count = GRID_MAX_POINTS; + + if (DGUSLanguageSwitch == MKS_English) { + const char level_buf_en[] = "Start Level"; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en, 32, true); + } + else if (DGUSLanguageSwitch == MKS_SimpleChinese) { + const uint16_t level_buf_ch[] = {0xAABF, 0xBCCA, 0xF7B5, 0xBDC6, 0x2000}; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch, 32, true); + } + + cs = getCurrentScreen(); + if (cs != MKSLCD_AUTO_LEVEL) GotoScreen(MKSLCD_AUTO_LEVEL); + + #else + + GotoScreen(MKSLCD_SCREEN_LEVEL); + + #endif + break; + + case 1: + soft_endstop._enabled = true; + GotoScreen(MKSLCD_SCREEM_TOOL); + break; + + default: break; + } +} + +void DGUSScreenHandler::MeshLevelDistanceConfig(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t mesh_dist = swap16(*(uint16_t *)val_ptr); + switch (mesh_dist) { + case 0: mesh_adj_distance = 0.01; break; + case 1: mesh_adj_distance = 0.1; break; + case 2: mesh_adj_distance = 1; break; + default: mesh_adj_distance = 0.1; break; + } +} + +void DGUSScreenHandler::MeshLevel(DGUS_VP_Variable &var, void *val_ptr) { + #if ENABLED(MESH_BED_LEVELING) + uint16_t mesh_value = swap16(*(uint16_t *)val_ptr); + // static uint8_t a_first_level = 1; + char cmd_buf[30]; + float offset = mesh_adj_distance; + int16_t integer, Deci, Deci2; + // float f3 = current_position.z; + // float f4 = current_position.z; + switch (mesh_value) { + case 0: + offset = mesh_adj_distance; + integer = offset; // get int + Deci = (offset * 100); + Deci = Deci % 100; + Deci2 = offset * 100; + Deci2 = Deci2 % 10; + soft_endstop._enabled = false; + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(cmd_buf, 30, PSTR("G1 Z%d.%d%d"), integer, Deci, Deci2); + queue.enqueue_one_now(cmd_buf); + queue.enqueue_now_P(PSTR("G90")); + //soft_endstop._enabled = true; + break; + + case 1: + offset = mesh_adj_distance; + integer = offset; // get int + Deci = (offset * 100); + Deci = Deci % 100; + Deci2 = offset * 100; + Deci2 = Deci2 % 10; + soft_endstop._enabled = false; + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(cmd_buf, 30, PSTR("G1 Z-%d.%d%d"), integer, Deci, Deci2); + queue.enqueue_one_now(cmd_buf); + queue.enqueue_now_P(PSTR("G90")); + break; + + case 2: + if (mesh_point_count == GRID_MAX_POINTS) { // 第1个点 + queue.enqueue_now_P(PSTR("G29S1")); + mesh_point_count--; + + if (DGUSLanguageSwitch == MKS_English) { + const char level_buf_en1[] = "Next Point"; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en1, 32, true); + } + else if (DGUSLanguageSwitch == MKS_SimpleChinese) { + const uint16_t level_buf_ch1[] = {0xC2CF, 0xBBD2, 0xE3B5, 0x2000}; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch1, 32, true); + } + } + else if (mesh_point_count > 1) { // 倒数第二个点 + queue.enqueue_now_P(PSTR("G29S2")); + mesh_point_count--; + if (DGUSLanguageSwitch == MKS_English) { + const char level_buf_en2[] = "Next Point"; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en2, 32, true); + } + else if (DGUSLanguageSwitch == MKS_SimpleChinese) { + const uint16_t level_buf_ch2[] = {0xC2CF, 0xBBD2, 0xE3B5, 0x2000}; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch2, 32, true); + } + } + else if (mesh_point_count == 1) { + queue.enqueue_now_P(PSTR("G29S2")); + mesh_point_count--; + if (DGUSLanguageSwitch == MKS_English) { + const char level_buf_en2[] = "Level Finsh"; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en2, 32, true); + } + else if (DGUSLanguageSwitch == MKS_SimpleChinese) { + const uint16_t level_buf_ch2[] = {0xF7B5, 0xBDC6, 0xEACD, 0xC9B3, 0x2000}; + dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch2, 32, true); + } + settings.save(); + } + else if (mesh_point_count == 0) { + + mesh_point_count = GRID_MAX_POINTS; + soft_endstop._enabled = true; + settings.save(); + GotoScreen(MKSLCD_SCREEM_TOOL); + } + break; + + default: + break; + } + #endif // MESH_BED_LEVELING +} + +void DGUSScreenHandler::LCD_BLK_Adjust(DGUS_VP_Variable &var, void *val_ptr) { + + uint16_t lcd_value = swap16(*(uint16_t *)val_ptr); + + if(lcd_value > 100) lcd_value = 100; + else if(lcd_value < 10) lcd_value = 10; + + lcd_default_light = lcd_value; + + const uint16_t lcd_data[2] = {lcd_default_light, lcd_default_light}; + dgusdisplay.WriteVariable(0x0082, &lcd_data, 5, true); +} + +void DGUSScreenHandler::ManualAssistLeveling(DGUS_VP_Variable &var, void *val_ptr) { + int16_t point_value = swap16(*(uint16_t *)val_ptr); + + int16_t level_x_pos, level_y_pos; + char buf_level[32] = {0}; + unsigned int level_speed = 1500; + static bool first_level_flag = false; + + if (!first_level_flag) + queue.enqueue_now_P(G28_STR); + + switch (point_value) { + case 0x0001: + if (first_level_flag) + queue.enqueue_now_P(G28_STR); + queue.enqueue_now_P(PSTR("G1 Z10")); + //level_x_pos = X_MIN_POS + 20; + //level_y_pos = Y_MIN_POS + 20; + level_x_pos = X_MIN_POS + abs(level_1_x_point); + level_y_pos = Y_MIN_POS + abs(level_1_y_point); + + memset(buf_level, 0, sizeof(buf_level)); + sprintf_P(buf_level, "G0 X%d Y%d F%d", level_x_pos, level_y_pos, level_speed); + queue.enqueue_one_now(buf_level); + queue.enqueue_now_P(PSTR("G28 Z")); + break; + case 0x0002: + queue.enqueue_now_P(PSTR("G1 Z10")); + + //level_x_pos = X_MAX_POS - 20; + //level_y_pos = Y_MIN_POS + 20; + + level_x_pos = X_MAX_POS - abs(level_2_x_point); + level_y_pos = Y_MIN_POS + abs(level_2_y_point); + + sprintf_P(buf_level, "G0 X%d Y%d F%d", level_x_pos, level_y_pos, level_speed); + queue.enqueue_one_now(buf_level); + //queue.enqueue_now_P(PSTR("G28Z")); + queue.enqueue_now_P(PSTR("G1 Z-10")); + break; + case 0x0003: + queue.enqueue_now_P(PSTR("G1 Z10")); + + //level_x_pos = X_MAX_POS - 20; + //level_y_pos = Y_MAX_POS - 20; + + level_x_pos = X_MAX_POS - abs(level_3_x_point); + level_y_pos = Y_MAX_POS - abs(level_3_y_point); + + sprintf_P(buf_level, "G0 X%d Y%d F%d", level_x_pos, level_y_pos, level_speed); + queue.enqueue_one_now(buf_level); + //sprintf_P(buf_level, PSTR("G28 Z")); + queue.enqueue_now_P(PSTR("G1 Z-10")); + break; + case 0x0004: + queue.enqueue_now_P(PSTR("G1 Z10")); + + //level_x_pos = X_MIN_POS + 20; + //level_y_pos = Y_MAX_POS - 20; + level_x_pos = X_MIN_POS + abs(level_4_x_point); + level_y_pos = Y_MAX_POS - abs(level_4_y_point); + + sprintf_P(buf_level, "G0 X%d Y%d F%d", level_x_pos, level_y_pos, level_speed); + queue.enqueue_one_now(buf_level); + //sprintf_P(buf_level, PSTR("G28 Z")); + queue.enqueue_now_P(PSTR("G1 Z-10")); + break; + case 0x0005: + queue.enqueue_now_P(PSTR("G1 Z10")); + //level_x_pos = (uint16_t)(X_MAX_POS / 2); + //level_y_pos = (uint16_t)(Y_MAX_POS / 2); + level_x_pos = abs(level_5_x_point); + level_y_pos = abs(level_5_y_point); + + sprintf_P(buf_level, "G0 X%d Y%d F%d", level_x_pos, level_y_pos, level_speed); + queue.enqueue_one_now(buf_level); + queue.enqueue_now_P(PSTR("G1 Z-10")); + break; + } + + // Only once + first_level_flag = true; +} + +#define mks_min(a, b) ((a) < (b)) ? (a) : (b) +#define mks_max(a, b) ((a) > (b)) ? (a) : (b) +void DGUSScreenHandler::TMC_ChangeConfig(DGUS_VP_Variable &var, void *val_ptr) { + #if EITHER(HAS_TRINAMIC_CONFIG, HAS_STEALTHCHOP) + uint16_t tmc_value = swap16(*(uint16_t*)val_ptr); + #endif + + switch (var.VP) { + case VP_TMC_X_STEP: + #if USE_SENSORLESS + #if AXIS_HAS_STEALTHCHOP(X) + stepperX.homing_threshold(mks_min(tmc_value, 255)); + settings.save(); + //tmc_x_step = stepperX.homing_threshold(); + #endif + #endif + break; + case VP_TMC_Y_STEP: + #if USE_SENSORLESS + #if AXIS_HAS_STEALTHCHOP(Y) + stepperY.homing_threshold(mks_min(tmc_value, 255)); + settings.save(); + //tmc_y_step = stepperY.homing_threshold(); + #endif + #endif + break; + case VP_TMC_Z_STEP: + #if USE_SENSORLESS + #if AXIS_HAS_STEALTHCHOP(Z) + stepperZ.homing_threshold(mks_min(tmc_value, 255)); + settings.save(); + //tmc_z_step = stepperZ.homing_threshold(); + #endif + #endif + break; + case VP_TMC_X_Current: + #if AXIS_IS_TMC(X) + stepperX.rms_current(tmc_value); + settings.save(); + #endif + break; + case VP_TMC_X1_Current: + #if AXIS_IS_TMC(X2) + stepperX2.rms_current(tmc_value); + settings.save(); + #endif + break; + case VP_TMC_Y_Current: + #if AXIS_IS_TMC(Y) + stepperY.rms_current(tmc_value); + settings.save(); + #endif + break; + case VP_TMC_Y1_Current: + #if AXIS_IS_TMC(X2) + stepperY2.rms_current(tmc_value); + settings.save(); + #endif + break; + case VP_TMC_Z_Current: + #if AXIS_IS_TMC(Z) + stepperZ.rms_current(tmc_value); + settings.save(); + #endif + break; + case VP_TMC_Z1_Current: + #if AXIS_IS_TMC(Z2) + stepperZ2.rms_current(tmc_value); + settings.save(); + #endif + break; + case VP_TMC_E0_Current: + #if AXIS_IS_TMC(E0) + stepperE0.rms_current(tmc_value); + settings.save(); + #endif + break; + case VP_TMC_E1_Current: + #if AXIS_IS_TMC(E1) + stepperE1.rms_current(tmc_value); + settings.save(); + #endif + break; + + default: + break; + } + #if USE_SENSORLESS + #if AXIS_HAS_STEALTHCHOP(X) + tmc_x_step = stepperX.homing_threshold(); + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + tmc_y_step = stepperY.homing_threshold(); + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + tmc_z_step = stepperZ.homing_threshold(); + #endif + #endif +} + +void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleManualMove"); + + int16_t movevalue = swap16(*(uint16_t*)val_ptr); + + // Choose Move distance + if (distanceMove == 0x01) distanceMove = 10; + else if (distanceMove == 0x02) distanceMove = 100; + else if (distanceMove == 0x03) distanceMove = 1000; + + DEBUG_ECHOLNPAIR("QUEUE LEN:", queue.length); + + if (!print_job_timer.isPaused() && queue.length >= BUFSIZE) + return; + + char axiscode; + unsigned int speed = 1500; // FIXME: get default feedrate for manual moves, dont hardcode. + + switch (var.VP) { // switch X Y Z or Home + default: return; + case VP_MOVE_X: + DEBUG_ECHOLNPGM("X Move"); + axiscode = 'X'; + if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove; + break; + + case VP_MOVE_Y: + DEBUG_ECHOLNPGM("Y Move"); + axiscode = 'Y'; + if (!ExtUI::canMove(ExtUI::axis_t::Y)) goto cannotmove; + break; + + case VP_MOVE_Z: + DEBUG_ECHOLNPGM("Z Move"); + axiscode = 'Z'; + speed = 300; // default to 5mm/s + if (!ExtUI::canMove(ExtUI::axis_t::Z)) goto cannotmove; + break; + + case VP_MOTOR_LOCK_UNLOK: + DEBUG_ECHOLNPGM("Motor Unlock"); + movevalue = 5; + axiscode = '\0'; + // return ; + break; + + case VP_HOME_ALL: // only used for homing + DEBUG_ECHOLNPGM("Home all"); + axiscode = '\0'; + movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing. + //return; + break; + + case VP_X_HOME: + DEBUG_ECHOLNPGM("X Home"); + axiscode = 'X'; + movevalue = 0; + break; + + case VP_Y_HOME: + DEBUG_ECHOLNPGM("Y Home"); + axiscode = 'Y'; + movevalue = 0; + break; + + case VP_Z_HOME: + DEBUG_ECHOLNPGM("Z Home"); + axiscode = 'Z'; + movevalue = 0; + break; + } + + DEBUG_ECHOPAIR("movevalue = ", movevalue); + if (movevalue != 0 && movevalue != 5) { // get move distance + switch (movevalue) { + case 0x0001: movevalue = distanceMove; break; + case 0x0002: movevalue = -distanceMove; break; + default: movevalue = 0; break; + } + } + + if (!movevalue) { + // homing + DEBUG_ECHOPAIR(" homing ", axiscode); + // char buf[6] = "G28 X"; + // buf[4] = axiscode; + + char buf[6]; + sprintf(buf,"G28 %c",axiscode); + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); + //DEBUG_ECHOLNPGM(" ✓"); + ForceCompleteUpdate(); + return; + } + else if (movevalue == 5) { + DEBUG_ECHOPAIR("send M84"); + char buf[6]; + snprintf_P(buf,6,PSTR("M84 %c"),axiscode); + queue.enqueue_one_now(buf); + ForceCompleteUpdate(); + return; + } + else { + // movement + DEBUG_ECHOPAIR(" move ", axiscode); + bool old_relative_mode = relative_mode; + + if (!relative_mode) { + //DEBUG_ECHOPGM(" G91"); + queue.enqueue_now_P(PSTR("G91")); + //DEBUG_ECHOPGM(" ✓ "); + } + char buf[32]; // G1 X9999.99 F12345 + // unsigned int backup_speed = MMS_TO_MMM(feedrate_mm_s); + char sign[] = "\0"; + int16_t value = movevalue / 100; + if (movevalue < 0) { value = -value; sign[0] = '-'; } + int16_t fraction = ABS(movevalue) % 100; + snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed); + queue.enqueue_one_now(buf); + + //if (backup_speed != speed) { + // snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed); + // queue.enqueue_one_now(buf); + // //DEBUG_ECHOPAIR(" ", buf); + //} + + //while (!enqueue_and_echo_command(buf)) idle(); + //DEBUG_ECHOLNPGM(" ✓ "); + if (!old_relative_mode) { + //DEBUG_ECHOPGM("G90"); + //queue.enqueue_now_P(PSTR("G90")); + queue.enqueue_now_P(PSTR("G90")); + //DEBUG_ECHOPGM(" ✓ "); + } + } + + ForceCompleteUpdate(); + DEBUG_ECHOLNPGM("manmv done."); + return; + + cannotmove: + DEBUG_ECHOLNPAIR(" cannot move ", axiscode); + return; +} + +void DGUSScreenHandler::GetParkPos_MKS(DGUS_VP_Variable &var, void *val_ptr) { + int16_t value_pos = swap16(*(int16_t*)val_ptr); + + switch (var.VP) { + case VP_X_PARK_POS: x_park_pos = value_pos; break; + case VP_Y_PARK_POS: y_park_pos = value_pos; break; + case VP_Z_PARK_POS: z_park_pos = value_pos; break; + default: break; + } + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleChangeLevelPoint_MKS(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleStepPerMMChanged"); + + int16_t value_raw = swap16(*(int16_t*)val_ptr); + + DEBUG_ECHOLNPAIR_F("value:", value_raw); + + *(int16_t*)var.memadr = value_raw; + + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleStepPerMMChanged_MKS(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleStepPerMMChanged"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw; + ExtUI::axis_t axis; + switch (var.VP) { + case VP_X_STEP_PER_MM: axis = ExtUI::axis_t::X; break; + case VP_Y_STEP_PER_MM: axis = ExtUI::axis_t::Y; break; + case VP_Z_STEP_PER_MM: axis = ExtUI::axis_t::Z; break; + default: return; + } + DEBUG_ECHOLNPAIR_F("value:", value); + ExtUI::setAxisSteps_per_mm(value, axis); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(axis)); + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleStepPerMMExtruderChanged_MKS(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleStepPerMMExtruderChanged"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw; + ExtUI::extruder_t extruder; + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_STEP_PER_MM: extruder = ExtUI::extruder_t::E0; break; + #endif + #if HOTENDS >= 2 + #endif + case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break; + } + DEBUG_ECHOLNPAIR_F("value:", value); + ExtUI::setAxisSteps_per_mm(value, extruder); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(extruder)); + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleMaxSpeedChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleMaxSpeedChange_MKS"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw; + ExtUI::axis_t axis; + switch (var.VP) { + case VP_X_MAX_SPEED: axis = ExtUI::axis_t::X; break; + case VP_Y_MAX_SPEED: axis = ExtUI::axis_t::Y; break; + case VP_Z_MAX_SPEED: axis = ExtUI::axis_t::Z; break; + default: return; + } + DEBUG_ECHOLNPAIR_F("value:", value); + // ExtUI::setAxisSteps_per_mm(value,extruder); + ExtUI::setAxisMaxFeedrate_mm_s(value, axis); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxFeedrate_mm_s(axis)); + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleExtruderMaxSpeedChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleMaxSpeedChange_MKS"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw; + ExtUI::extruder_t extruder; + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_MAX_SPEED: extruder = ExtUI::extruder_t::E0; break; + #endif + #if HOTENDS >= 2 + #endif + case VP_E1_MAX_SPEED: extruder = ExtUI::extruder_t::E1; break; + } + DEBUG_ECHOLNPAIR_F("value:", value); + // ExtUI::setAxisSteps_per_mm(value,extruder); + ExtUI::setAxisMaxFeedrate_mm_s(value, extruder); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxFeedrate_mm_s(extruder)); + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleMaxAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleMaxSpeedChange_MKS"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw; + ExtUI::axis_t axis; + switch (var.VP) { + case VP_X_ACC_MAX_SPEED: axis = ExtUI::axis_t::X; break; + case VP_Y_ACC_MAX_SPEED: axis = ExtUI::axis_t::Y; break; + case VP_Z_ACC_MAX_SPEED: axis = ExtUI::axis_t::Z; break; + default: return; + } + DEBUG_ECHOLNPAIR_F("value:", value); + ExtUI::setAxisMaxAcceleration_mm_s2(value, axis); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxAcceleration_mm_s2(axis)); + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleExtruderAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleMaxSpeedChange_MKS"); + + uint16_t value_raw = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("value_raw:", value_raw); + float value = (float)value_raw; + ExtUI::extruder_t extruder; + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_ACC_MAX_SPEED: extruder = ExtUI::extruder_t::E0; settings.load(); break; + #endif + #if HOTENDS >= 2 + #endif + case VP_E1_ACC_MAX_SPEED: extruder = ExtUI::extruder_t::E1; settings.load(); break; + } + DEBUG_ECHOLNPAIR_F("value:", value); + // ExtUI::setAxisSteps_per_mm(value,extruder); + ExtUI::setAxisMaxAcceleration_mm_s2(value, extruder); + DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxAcceleration_mm_s2(extruder)); + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleTravelAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t value_travel = swap16(*(uint16_t*)val_ptr); + float value = (float)value_travel; + planner.settings.travel_acceleration = value; + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleFeedRateMinChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t value_t = swap16(*(uint16_t*)val_ptr); + float value = (float)value_t; + planner.settings.min_feedrate_mm_s = value; + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleMin_T_F_MKS(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t value_t_f = swap16(*(uint16_t*)val_ptr); + float value = (float)value_t_f; + planner.settings.min_travel_feedrate_mm_s = value; + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t value_acc = swap16(*(uint16_t*)val_ptr); + float value = (float)value_acc; + planner.settings.acceleration = value; + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::HandleGetExMinTemp_MKS(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t value_ex_min_temp = swap16(*(uint16_t*)val_ptr); + thermalManager.extrude_min_temp = value_ex_min_temp; + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel +} + +#if HAS_PID_HEATING + void DGUSScreenHandler::HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t rawvalue = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("V1:", rawvalue); + float value = (float)rawvalue / 10; + DEBUG_ECHOLNPAIR("V2:", value); + float newvalue = 0; + + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_PID_P: newvalue = value; break; + case VP_E0_PID_I: newvalue = scalePID_i(value); break; + case VP_E0_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HOTENDS >= 2 + case VP_E1_PID_P: newvalue = value; break; + case VP_E1_PID_I: newvalue = scalePID_i(value); break; + case VP_E1_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HAS_HEATED_BED + case VP_BED_PID_P: newvalue = value; break; + case VP_BED_PID_I: newvalue = scalePID_i(value); break; + case VP_BED_PID_D: newvalue = scalePID_d(value); break; + #endif + } + + DEBUG_ECHOLNPAIR_F("V3:", newvalue); + *(float *)var.memadr = newvalue; + + settings.save(); + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + } +#endif // HAS_PID_HEATING + +#if ENABLED(BABYSTEPPING) + void DGUSScreenHandler::HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleLiveAdjustZ"); + char babystep_buf[30]; + float step = ZOffset_distance; + + uint16_t flag = swap16(*(uint16_t*)val_ptr); + switch (flag) { + case 0: + if (step == 0.01) + queue.inject_P(PSTR("M290 Z-0.01")); + else if (step == 0.1) + queue.inject_P(PSTR("M290 Z-0.1")); + else if (step == 0.5) + queue.inject_P(PSTR("M290 Z-0.5")); + else if (step == 1) + queue.inject_P(PSTR("M290 Z-1")); + else + queue.inject_P(PSTR("M290 Z-0.01")); + + z_offset_add = z_offset_add - ZOffset_distance; + break; + + case 1: + if (step == 0.01) + queue.inject_P(PSTR("M290 Z0.01")); + else if (step == 0.1) + queue.inject_P(PSTR("M290 Z0.1")); + else if (step == 0.5) + queue.inject_P(PSTR("M290 Z0.5")); + else if (step == 1) + queue.inject_P(PSTR("M290 Z1")); + else + queue.inject_P(PSTR("M290 Z-0.01")); + + z_offset_add = z_offset_add + ZOffset_distance; + break; + + default: + break; + } + ForceCompleteUpdate(); + } +#endif // BABYSTEPPING + +void DGUSScreenHandler::GetManualFilament(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleGetFilament"); + + uint16_t value_len = swap16(*(uint16_t*)val_ptr); + + float value = (float)value_len; + + DEBUG_ECHOLNPAIR_F("Get Filament len value:", value); + distanceFilament = value; + + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::GetManualFilamentSpeed(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleGetFilamentSpeed"); + + uint16_t value_len = swap16(*(uint16_t*)val_ptr); + + DEBUG_ECHOLNPAIR_F("FilamentSpeed value:", value_len); + + FilamentSpeed = value_len; + + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + return; +} + +void DGUSScreenHandler::MKS_FilamentLoad(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("Load Filament"); + char buf[40]; + + uint16_t val_t = swap16(*(uint16_t*)val_ptr); + + switch (val_t) { + case 0: + #if HOTENDS >= 1 + if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) { + if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) + thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0); + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true); + SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); + } + else { + queue.enqueue_now_P(PSTR("T0")); + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(buf,40,PSTR("G1 E%d F%d"),(int)distanceFilament,FilamentSpeed * 60); + queue.enqueue_one_now(buf); + queue.enqueue_now_P(PSTR("G90")); + } + #endif + break; + + case 1: + #if HOTENDS >= 2 + if (thermalManager.temp_hotend[1].celsius < thermalManager.extrude_min_temp) { + if (thermalManager.temp_hotend[1].target < thermalManager.extrude_min_temp) + thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 1); + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true); + SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); + } + else { + queue.enqueue_now_P(PSTR("T1")); + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(buf,40,PSTR("G1 E%d F%d"),(int)distanceFilament,FilamentSpeed * 60); + queue.enqueue_one_now(buf); + queue.enqueue_now_P(PSTR("G90")); + } + #endif + #if ENABLED(SINGLENOZZLE) + if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) { + if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) + thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0); + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true); + SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); + } + else { + queue.enqueue_now_P(PSTR("T1")); + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(buf,40,PSTR("G1 E%d F%d"),(int)distanceFilament,FilamentSpeed * 60); + queue.enqueue_one_now(buf); + queue.enqueue_now_P(PSTR("G90")); + } + #endif + break; + + default: + break; + } +} + +void DGUSScreenHandler::MKS_FilamentUnLoad(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("UnLoad Filament"); + char buf[40]; + uint16_t val_t = swap16(*(uint16_t*)val_ptr); + switch (val_t) { + case 0: + #if HOTENDS >= 1 + if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) { + if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) + thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0); + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true); + SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); + } + else { + queue.enqueue_now_P(PSTR("T0")); + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(buf,40,PSTR("G1 E-%d F%d"),(int)distanceFilament,FilamentSpeed * 60); + queue.enqueue_one_now(buf); + queue.enqueue_now_P(PSTR("G90")); + } + #endif + break; + case 1: + #if HOTENDS >= 2 + if (thermalManager.temp_hotend[1].celsius < thermalManager.extrude_min_temp) { + if (thermalManager.temp_hotend[1].target < thermalManager.extrude_min_temp) + thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 1); + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true); + SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); + } + else { + queue.enqueue_now_P(PSTR("T1")); + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(buf,40,PSTR("G1 E-%d F%d"),(int)distanceFilament,FilamentSpeed * 60); + queue.enqueue_one_now(buf); + queue.enqueue_now_P(PSTR("G90")); + } + #endif + + #if ENABLED(SINGLENOZZLE) + if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) { + if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) + thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0); + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true); + SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); + } + else { + queue.enqueue_now_P(PSTR("T1")); + queue.enqueue_now_P(PSTR("G91")); + snprintf_P(buf,40,PSTR("G1 E-%d F%d"),(int)distanceFilament,FilamentSpeed * 60); + queue.enqueue_one_now(buf); + queue.enqueue_now_P(PSTR("G90")); + } + #endif + break; + } +} + +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + + void DGUSScreenHandler::HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleFilamentOption"); + + uint8_t e_temp = 0; + filament_data.heated = false; + uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); + if (preheat_option <= 8) { // Load filament type + filament_data.action = 1; + } + else if (preheat_option >= 10) { // Unload filament type + preheat_option -= 10; + filament_data.action = 2; + filament_data.purge_length = DGUS_FILAMENT_PURGE_LENGTH; + } + else { // Cancel filament operation + filament_data.action = 0; + } + + switch (preheat_option) { + case 0: // Load PLA + #ifdef PREHEAT_1_TEMP_HOTEND + e_temp = PREHEAT_1_TEMP_HOTEND; + #endif + break; + case 1: // Load ABS + TERN_(PREHEAT_2_TEMP_HOTEND, e_temp = PREHEAT_2_TEMP_HOTEND); + break; + case 2: // Load PET + #ifdef PREHEAT_3_TEMP_HOTEND + e_temp = PREHEAT_3_TEMP_HOTEND; + #endif + break; + case 3: // Load FLEX + #ifdef PREHEAT_4_TEMP_HOTEND + e_temp = PREHEAT_4_TEMP_HOTEND; + #endif + break; + case 9: // Cool down + default: + e_temp = 0; + break; + } + + if (filament_data.action == 0) { // Go back to utility screen + #if HOTENDS >= 1 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0); + #endif + #if HOTENDS >= 2 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1); + #endif + GotoScreen(DGUSLCD_SCREEN_UTILITY); + } + else { // Go to the preheat screen to show the heating progress + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E0; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + #if HOTENDS >= 2 + case VP_E1_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E1; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + } + } + } + + void DGUSScreenHandler::HandleFilamentLoadUnload(DGUS_VP_Variable &var) { + DEBUG_ECHOLNPGM("HandleFilamentLoadUnload"); + if (filament_data.action <= 0) return; + + // If we close to the target temperature, we can start load or unload the filament + if (thermalManager.hotEnoughToExtrude(filament_data.extruder) && \ + thermalManager.targetHotEnoughToExtrude(filament_data.extruder)) { + float movevalue = DGUS_FILAMENT_LOAD_LENGTH_PER_TIME; + + if (filament_data.action == 1) { // load filament + if (!filament_data.heated) { + filament_data.heated = true; + } + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + } + else { // unload filament + if (!filament_data.heated) { + GotoScreen(DGUSLCD_SCREEN_FILAMENT_UNLOADING); + filament_data.heated = true; + } + // Before unloading extrude to prevent jamming + if (filament_data.purge_length >= 0) { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + filament_data.purge_length -= movevalue; + } + else { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) - movevalue; + } + } + ExtUI::setAxisPosition_mm(movevalue, filament_data.extruder); + } + } +#endif // DGUS_FILAMENT_LOADUNLOAD + +bool DGUSScreenHandler::loop() { + dgusdisplay.loop(); + + const millis_t ms = millis(); + static millis_t next_event_ms = 0; + + static uint8_t language_times = 2; + + if (!IsScreenComplete() || ELAPSED(ms, next_event_ms)) { + next_event_ms = ms + DGUS_UPDATE_INTERVAL_MS; + UpdateScreenVPData(); + } + + if (language_times != 0) { + LanguagePInit(); + DGUS_LanguageDisplay(DGUSLanguageSwitch); + language_times--; + } + + #if ENABLED(SHOW_BOOTSCREEN) + static bool booted = false; + if (!booted && ELAPSED(ms, TERN(USE_MKS_GREEN_UI, 1000, BOOTSCREEN_TIMEOUT))) { + booted = true; + #if ANY_AXIS_HAS(STEALTHCHOP) + #if AXIS_HAS_STEALTHCHOP(X) + tmc_x_step = stepperX.homing_threshold(); + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + tmc_y_step = stepperY.homing_threshold(); + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + tmc_z_step = stepperZ.homing_threshold(); + #endif + #endif + + if (min_ex_temp != 0) + thermalManager.extrude_min_temp = min_ex_temp; + + DGUS_ExtrudeLoadInit(); + + TERN_(DGUS_MKS_RUNOUT_SENSOR, DGUS_RunoutInit()); + + if (TERN0(POWER_LOSS_RECOVERY, recovery.valid())) + GotoScreen(DGUSLCD_SCREEN_POWER_LOSS); + else + GotoScreen(DGUSLCD_SCREEN_MAIN); + } + + #if ENABLED(DGUS_MKS_RUNOUT_SENSOR) + if (booted && (IS_SD_PRINTING() || IS_SD_PAUSED())) + DGUS_Runout_Idle(); + #endif + #endif // SHOW_BOOTSCREEN + + return IsScreenComplete(); +} + +void DGUSScreenHandler::LanguagePInit() { + switch (DGUSLanguageSwitch) { + case MKS_SimpleChinese: + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_Choose); + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_NoChoose); + break; + case MKS_English: + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_NoChoose); + dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_Choose); + break; + default: + break; + } +} + +void DGUSScreenHandler::DGUS_ExtrudeLoadInit(void) { + ex_filament.ex_length = distanceFilament; + ex_filament.ex_load_unload_flag = 0; + ex_filament.ex_need_time = FilamentSpeed; + ex_filament.ex_speed = 0; + ex_filament.ex_status = EX_NONE; + ex_filament.ex_tick_end = 0; + ex_filament.ex_tick_start = 0; +} + +void DGUSScreenHandler::DGUS_RunoutInit(void) { + #if PIN_EXISTS(MT_DET_1) + pinMode(MT_DET_1_PIN, INPUT_PULLUP); + #endif + runout_mks.de_count = 0; + runout_mks.de_times = 10; + runout_mks.pin_status = 1; + runout_mks.runout_status = UNRUNOUT_STATUS; +} + +void DGUSScreenHandler::DGUS_Runout_Idle(void) { + #if ENABLED(DGUS_MKS_RUNOUT_SENSOR) + // scanf runout pin + switch (runout_mks.runout_status) { + + case RUNOUT_STATUS: + runout_mks.runout_status = RUNOUT_BEGIN_STATUS; + queue.inject_P(PSTR("M25")); + GotoScreen(MKSLCD_SCREEN_PAUSE); + + sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please change filament!"), nullptr, true, true, true, true); + // SetupConfirmAction(nullptr); + GotoScreen(DGUSLCD_SCREEN_POPUP); + break; + + case UNRUNOUT_STATUS: + if (READ(MT_DET_1_PIN) == LOW) + runout_mks.runout_status = RUNOUT_STATUS; + break; + + case RUNOUT_BEGIN_STATUS: + if (READ(MT_DET_1_PIN) == HIGH) + runout_mks.runout_status = RUNOUT_WAITTING_STATUS; + break; + + case RUNOUT_WAITTING_STATUS: + if (READ(MT_DET_1_PIN) == LOW) + runout_mks.runout_status = RUNOUT_BEGIN_STATUS; + break; + + default: break; + } + #endif +} + +void DGUSScreenHandler::DGUS_LanguageDisplay(uint8_t var) { + if (var == MKS_English) { + const char home_buf_en[] = "Home"; + dgusdisplay.WriteVariable(VP_HOME_Dis, home_buf_en, 32, true); + + const char setting_buf_en[] = "Setting"; + dgusdisplay.WriteVariable(VP_Setting_Dis, setting_buf_en, 32, true); + + const char Tool_buf_en[] = "Tool"; + dgusdisplay.WriteVariable(VP_Tool_Dis, Tool_buf_en, 32, true); + + const char Print_buf_en[] = "Print"; + dgusdisplay.WriteVariable(VP_Print_Dis, Print_buf_en, 32, true); + + const char Language_buf_en[] = "Language"; + dgusdisplay.WriteVariable(VP_Language_Dis, Language_buf_en, 32, true); + + const char About_buf_en[] = "About"; + dgusdisplay.WriteVariable(VP_About_Dis, About_buf_en, 32, true); + + const char Config_buf_en[] = "Config"; + dgusdisplay.WriteVariable(VP_Config_Dis, Config_buf_en, 32, true); + + const char MotorConfig_buf_en[] = "MotorConfig"; + dgusdisplay.WriteVariable(VP_MotorConfig_Dis, MotorConfig_buf_en, 32, true); + + const char LevelConfig_buf_en[] = "LevelConfig"; + dgusdisplay.WriteVariable(VP_LevelConfig_Dis, LevelConfig_buf_en, 32, true); + + const char TemperatureConfig_buf_en[] = "Temperature"; + dgusdisplay.WriteVariable(VP_TemperatureConfig_Dis, TemperatureConfig_buf_en, 32, true); + + const char Advance_buf_en[] = "Advance"; + dgusdisplay.WriteVariable(VP_Advance_Dis, Advance_buf_en, 32, true); + + const char Filament_buf_en[] = "Extrude"; + dgusdisplay.WriteVariable(VP_Filament_Dis, Filament_buf_en, 32, true); + + const char Move_buf_en[] = "Move"; + dgusdisplay.WriteVariable(VP_Move_Dis, Move_buf_en, 32, true); + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + const char Level_buf_en[] = "AutoLevel"; + dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_en, 32, true); + #elif ENABLED(MESH_BED_LEVELING) + const char Level_buf_en[] = "MeshLevel"; + dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_en, 32, true); + #else + const char Level_buf_en[] = "Level"; + dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_en, 32, true); + #endif + + const char MotorPluse_buf_en[] = "MotorPluse"; + dgusdisplay.WriteVariable(VP_MotorPluse_Dis, MotorPluse_buf_en, 32, true); + + const char MotorMaxSpeed_buf_en[] = "MotorMaxSpeed"; + dgusdisplay.WriteVariable(VP_MotorMaxSpeed_Dis, MotorMaxSpeed_buf_en, 32, true); + + const char MotorMaxAcc_buf_en[] = "MotorAcc"; + dgusdisplay.WriteVariable(VP_MotorMaxAcc_Dis, MotorMaxAcc_buf_en, 32, true); + + const char TravelAcc_buf_en[] = "TravelAcc"; + dgusdisplay.WriteVariable(VP_TravelAcc_Dis, TravelAcc_buf_en, 32, true); + + const char FeedRateMin_buf_en[] = "FeedRateMin"; + dgusdisplay.WriteVariable(VP_FeedRateMin_Dis, FeedRateMin_buf_en, 32, true); + + const char TravelFeeRateMin_buf_en[] = "TravelFeedRateMin"; + dgusdisplay.WriteVariable(VP_TravelFeeRateMin_Dis, TravelFeeRateMin_buf_en, 32, true); + + const char Acc_buf_en[] = "Acc"; + dgusdisplay.WriteVariable(VP_ACC_Dis, Acc_buf_en, 32, true); + + const char Point_One_buf_en[] = "Point_First"; + dgusdisplay.WriteVariable(VP_Point_One_Dis, Point_One_buf_en, 32, true); + + const char Point_Two_buf_en[] = "Point_Second"; + dgusdisplay.WriteVariable(VP_Point_Two_Dis, Point_Two_buf_en, 32, true); + + const char Point_Three_buf_en[] = "Point_Third"; + dgusdisplay.WriteVariable(VP_Point_Three_Dis, Point_Three_buf_en, 32, true); + + const char Point_Four_buf_en[] = "Point_Fourth"; + dgusdisplay.WriteVariable(VP_Point_Four_Dis, Point_Four_buf_en, 32, true); + + const char Point_Five_buf_en[] = "Point_Fifth"; + dgusdisplay.WriteVariable(VP_Point_Five_Dis, Point_Five_buf_en, 32, true); + + const char Extrusion_buf_en[] = "Extrusion"; + dgusdisplay.WriteVariable(VP_Extrusion_Dis, Extrusion_buf_en, 32, true); + + const char HeatBed_buf_en[] = "HeatBed"; + dgusdisplay.WriteVariable(VP_HeatBed_Dis, HeatBed_buf_en, 32, true); + + const char FactoryDefaults_buf_en[] = "FactoryDefaults"; + dgusdisplay.WriteVariable(VP_FactoryDefaults_Dis, FactoryDefaults_buf_en, 32, true); + + const char StoreSetting_buf_en[] = "StoreSetting"; + dgusdisplay.WriteVariable(VP_StoreSetting_Dis, StoreSetting_buf_en, 32, true); + + const char PrintPauseConfig_buf_en[] = "PrintPauseConfig"; + dgusdisplay.WriteVariable(VP_PrintPauseConfig_Dis, PrintPauseConfig_buf_en, 32, true); + + const char X_Pluse_buf_en[] = "X_Pluse"; + dgusdisplay.WriteVariable(VP_X_Pluse_Dis, X_Pluse_buf_en, 32, true); + + const char Y_Pluse_buf_en[] = "Y_Pluse"; + dgusdisplay.WriteVariable(VP_Y_Pluse_Dis, Y_Pluse_buf_en, 32, true); + + const char Z_Pluse_buf_en[] = "Z_Pluse"; + dgusdisplay.WriteVariable(VP_Z_Pluse_Dis, Z_Pluse_buf_en, 32, true); + + const char E0_Pluse_buf_en[] = "E0_Pluse"; + dgusdisplay.WriteVariable(VP_E0_Pluse_Dis, E0_Pluse_buf_en, 32, true); + + const char E1_Pluse_buf_en[] = "E1_Pluse"; + dgusdisplay.WriteVariable(VP_E1_Pluse_Dis, E1_Pluse_buf_en, 32, true); + + const char X_Max_Speed_buf_en[] = "X_Max_Speed"; + dgusdisplay.WriteVariable(VP_X_Max_Speed_Dis, X_Max_Speed_buf_en, 32, true); + + const char Y_Max_Speed_buf_en[] = "Y_Max_Speed"; + dgusdisplay.WriteVariable(VP_Y_Max_Speed_Dis, Y_Max_Speed_buf_en, 32, true); + + const char Z_Max_Speed_buf_en[] = "Z_Max_Speed"; + dgusdisplay.WriteVariable(VP_Z_Max_Speed_Dis, Z_Max_Speed_buf_en, 32, true); + + const char E0_Max_Speed_buf_en[] = "E0_Max_Speed"; + dgusdisplay.WriteVariable(VP_E0_Max_Speed_Dis, E0_Max_Speed_buf_en, 32, true); + + const char E1_Max_Speed_buf_en[] = "E1_Max_Speed"; + dgusdisplay.WriteVariable(VP_E1_Max_Speed_Dis, E1_Max_Speed_buf_en, 32, true); + + const char X_Max_Acc_Speed_buf_en[] = "X_Max_Acc_Speed"; + dgusdisplay.WriteVariable(VP_X_Max_Acc_Speed_Dis, X_Max_Acc_Speed_buf_en, 32, true); + + const char Y_Max_Acc_Speed_buf_en[] = "Y_Max_Acc_Speed"; + dgusdisplay.WriteVariable(VP_Y_Max_Acc_Speed_Dis, Y_Max_Acc_Speed_buf_en, 32, true); + + const char Z_Max_Acc_Speed_buf_en[] = "Z_Max_Acc_Speed"; + dgusdisplay.WriteVariable(VP_Z_Max_Acc_Speed_Dis, Z_Max_Acc_Speed_buf_en, 32, true); + + const char E0_Max_Acc_Speed_buf_en[] = "E0_Max_Acc_Speed"; + dgusdisplay.WriteVariable(VP_E0_Max_Acc_Speed_Dis, E0_Max_Acc_Speed_buf_en, 32, true); + + const char E1_Max_Acc_Speed_buf_en[] = "E1_Max_Acc_Speed"; + dgusdisplay.WriteVariable(VP_E1_Max_Acc_Speed_Dis, E1_Max_Acc_Speed_buf_en, 32, true); + + const char X_PARK_POS_buf_en[] = "X_PARK_POS"; + dgusdisplay.WriteVariable(VP_X_PARK_POS_Dis, X_PARK_POS_buf_en, 32, true); + + const char Y_PARK_POS_buf_en[] = "Y_PARK_POS"; + dgusdisplay.WriteVariable(VP_Y_PARK_POS_Dis, Y_PARK_POS_buf_en, 32, true); + + const char Z_PARK_POS_buf_en[] = "Z_PARK_POS"; + dgusdisplay.WriteVariable(VP_Z_PARK_POS_Dis, Z_PARK_POS_buf_en, 32, true); + + const char Length_buf_en[] = "Length"; + dgusdisplay.WriteVariable(VP_Length_Dis, Length_buf_en, 32, true); + + const char Speed_buf_en[] = "Speed"; + dgusdisplay.WriteVariable(VP_Speed_Dis, Speed_buf_en, 32, true); + + const char InOut_buf_en[] = "InOut"; + dgusdisplay.WriteVariable(VP_InOut_Dis, InOut_buf_en, 32, true); + + const char PrintTimet_buf_en[] = "PrintTime"; + dgusdisplay.WriteVariable(VP_PrintTime_Dis, PrintTimet_buf_en, 32, true); + + const char E0_Temp_buf_en[] = "E0_Temp"; + dgusdisplay.WriteVariable(VP_E0_Temp_Dis, E0_Temp_buf_en, 32, true); + + const char E1_Temp_buf_en[] = "E1_Temp"; + dgusdisplay.WriteVariable(VP_E1_Temp_Dis, E1_Temp_buf_en, 32, true); + + const char HB_Temp_buf_en[] = "HB_Temp"; + dgusdisplay.WriteVariable(VP_HB_Temp_Dis, HB_Temp_buf_en, 32, true); + + const char Feedrate_buf_en[] = "Feedrate"; + dgusdisplay.WriteVariable(VP_Feedrate_Dis, Feedrate_buf_en, 32, true); + + const char PrintAcc_buf_en[] = "PrintSpeed"; + dgusdisplay.WriteVariable(VP_PrintAcc_Dis, PrintAcc_buf_en, 32, true); + + const char FAN_Speed_buf_en[] = "FAN_Speed"; + dgusdisplay.WriteVariable(VP_FAN_Speed_Dis, FAN_Speed_buf_en, 32, true); + + const char Printing_buf_en[] = "Printing"; + dgusdisplay.WriteVariable(VP_Printing_Dis, Printing_buf_en, 32, true); + + const char Info_EEPROM_1_buf_en[] = "Store setting？"; + dgusdisplay.WriteVariable(VP_Info_EEPROM_1_Dis, Info_EEPROM_1_buf_en, 32, true); + + const char Info_EEPROM_2_buf_en[] = "Revert setting？"; + dgusdisplay.WriteVariable(VP_Info_EEPROM_2_Dis, Info_EEPROM_2_buf_en, 32, true); + + const char Info_PrinfFinsh_1_buf_en[] = "Print Done"; + dgusdisplay.WriteVariable(VP_Info_PrinfFinsh_1_Dis, Info_PrinfFinsh_1_buf_en, 32, true); + + const char TMC_X_Step_buf_en[] = "X_SenSitivity"; + dgusdisplay.WriteVariable(VP_TMC_X_Step_Dis, TMC_X_Step_buf_en, 32, true); + + const char TMC_Y_Step_buf_en[] = "Y_SenSitivity"; + dgusdisplay.WriteVariable(VP_TMC_Y_Step_Dis, TMC_Y_Step_buf_en, 32, true); + + const char TMC_Z_Step_buf_en[] = "Z_SenSitivity"; + dgusdisplay.WriteVariable(VP_TMC_Z_Step_Dis, TMC_Z_Step_buf_en, 32, true); + + const char TMC_X_Current_buf_en[] = "X_Current"; + dgusdisplay.WriteVariable(VP_TMC_X_Current_Dis, TMC_X_Current_buf_en, 32, true); + + const char TMC_Y_Current_buf_en[] = "Y_Current"; + dgusdisplay.WriteVariable(VP_TMC_Y_Current_Dis, TMC_Y_Current_buf_en, 32, true); + + const char TMC_Z_Current_buf_en[] = "Z_Current"; + dgusdisplay.WriteVariable(VP_TMC_Z_Current_Dis, TMC_Z_Current_buf_en, 32, true); + + const char TMC_E0_Current_buf_en[] = "E0_Current"; + dgusdisplay.WriteVariable(VP_TMC_E0_Current_Dis, TMC_E0_Current_buf_en, 32, true); + + const char TMC_X1_Current_buf_en[] = "X1_Current"; + dgusdisplay.WriteVariable(VP_TMC_X1_Current_Dis, TMC_X1_Current_buf_en, 32, true); + + const char TMC_Y1_Current_buf_en[] = "Y1_Current"; + dgusdisplay.WriteVariable(VP_TMC_Y1_Current_Dis, TMC_Y1_Current_buf_en, 32, true); + + const char TMC_Z1_Current_buf_en[] = "Z1_Current"; + dgusdisplay.WriteVariable(VP_TMC_Z1_Current_Dis, TMC_Z1_Current_buf_en, 32, true); + + const char TMC_E1_Current_buf_en[] = "E1_Current"; + dgusdisplay.WriteVariable(VP_TMC_E1_Current_Dis, TMC_E1_Current_buf_en, 32, true); + + const char Min_Ex_Temp_buf_en[] = "Min_Ex_Temp"; + dgusdisplay.WriteVariable(VP_Min_Ex_Temp_Dis, Min_Ex_Temp_buf_en, 32, true); + + const char AutoLEVEL_INFO1_buf_en[] = "Please Press Button!"; + dgusdisplay.WriteVariable(VP_AutoLEVEL_INFO1, AutoLEVEL_INFO1_buf_en, 32, true); + + const char EX_TEMP_INFO2_buf_en[] = "Please wait a monent"; + dgusdisplay.WriteVariable(VP_EX_TEMP_INFO2_Dis, EX_TEMP_INFO2_buf_en, 32, true); + + const char EX_TEMP_INFO3_buf_en[] = "Cancle"; + dgusdisplay.WriteVariable(VP_EX_TEMP_INFO3_Dis, EX_TEMP_INFO3_buf_en, 32, true); + + const char PrintConfrim_Info_buf_en[] = "Start Print?"; + dgusdisplay.WriteVariable(VP_PrintConfrim_Info_Dis, PrintConfrim_Info_buf_en, 32, true); + + const char StopPrintConfrim_Info_buf_en[] = "Stop Print?"; + dgusdisplay.WriteVariable(VP_StopPrintConfrim_Info_Dis, StopPrintConfrim_Info_buf_en, 32, true); + + const char Printting_buf_en[] = "Printing"; + dgusdisplay.WriteVariable(VP_Printting_Dis, Printting_buf_en, 32, true); + + const char LCD_BLK_buf_en[] = "Backlight"; + dgusdisplay.WriteVariable(VP_LCD_BLK_Dis, LCD_BLK_buf_en, 32, true); + } + else if (var == MKS_SimpleChinese) { + uint16_t home_buf_ch[] = { 0xF7D6, 0xB3D2 }; + dgusdisplay.WriteVariable(VP_HOME_Dis, home_buf_ch, 4, true); + + const uint16_t Setting_Dis[] = { 0xE8C9, 0xC3D6, 0x2000, 0x2000, 0x2000 }; + dgusdisplay.WriteVariable(VP_Setting_Dis, Setting_Dis, 7, true); + + const uint16_t Tool_Dis[] = { 0xA4B9, 0xDFBE }; + dgusdisplay.WriteVariable(VP_Tool_Dis, Tool_Dis, 4, true); + + const uint16_t Print_buf_ch[] = { 0xF2B4, 0xA1D3, 0x2000 }; + dgusdisplay.WriteVariable(VP_Print_Dis, Print_buf_ch, 6, true); + + const uint16_t Language_buf_ch[] = { 0xEFD3, 0xD4D1, 0x2000, 0x2000 }; + dgusdisplay.WriteVariable(VP_Language_Dis, Language_buf_ch, 8, true); + + const uint16_t About_buf_ch[] = { 0xD8B9, 0xDAD3, 0x2000 }; + dgusdisplay.WriteVariable(VP_About_Dis, About_buf_ch, 6, true); + + const uint16_t Config_buf_ch[] = { 0xE4C5, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Config_Dis, Config_buf_ch, 6, true); + + const uint16_t MotorConfig_buf_ch[] = { 0xE7B5, 0xFABB, 0xE4C5, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_MotorConfig_Dis, MotorConfig_buf_ch, 12, true); + + const uint16_t LevelConfig_buf_ch[] = { 0xD6CA, 0xAFB6, 0xF7B5, 0xBDC6, 0xE8C9, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_LevelConfig_Dis, LevelConfig_buf_ch, 32, true); + + const uint16_t TemperatureConfig_buf_ch[] = { 0xC2CE, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_TemperatureConfig_Dis, TemperatureConfig_buf_ch, 11, true); + + const uint16_t Advance_buf_ch[] = { 0xDFB8, 0xB6BC, 0xE8C9, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Advance_Dis, Advance_buf_ch, 16, true); + + const uint16_t Filament_buf_ch[] = { 0xB7BC, 0xF6B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_Filament_Dis, Filament_buf_ch, 8, true); + + const uint16_t Move_buf_ch[] = { 0xC6D2, 0xAFB6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Move_Dis, Move_buf_ch, 4, true); + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + const uint16_t Level_buf_ch[] = { 0xD4D7, 0xAFB6, 0xF7B5, 0xBDC6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_ch, 32, true); + #elif ENABLED(MESH_BED_LEVELING) + const uint16_t Level_buf_ch[] = { 0xF8CD, 0xF1B8, 0xF7B5, 0xBDC6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_ch, 32, true); + #else + const uint16_t Level_buf_ch[] = { 0xD6CA, 0xAFB6, 0xF7B5, 0xBDC6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_ch, 32, true); + #endif + + const uint16_t MotorPluse_buf_ch[] = { 0xF6C2, 0xE5B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_MotorPluse_Dis, MotorPluse_buf_ch, 16, true); + + const uint16_t MotorMaxSpeed_buf_ch[] = { 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_MotorMaxSpeed_Dis, MotorMaxSpeed_buf_ch, 16, true); + + const uint16_t MotorMaxAcc_buf_ch[] = { 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_MotorMaxAcc_Dis, MotorMaxAcc_buf_ch, 16, true); + + const uint16_t TravelAcc_buf_ch[] = { 0xD5BF, 0xD0D0, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_TravelAcc_Dis, TravelAcc_buf_ch, 16, true); + + const uint16_t FeedRateMin_buf_ch[] = { 0xEED7, 0xA1D0, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_FeedRateMin_Dis, FeedRateMin_buf_ch, 12, true); + + const uint16_t TravelFeeRateMin_buf_ch[] = { 0xD5BF, 0xD0D0, 0xEED7, 0xA1D0, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_TravelFeeRateMin_Dis, TravelFeeRateMin_buf_ch, 24, true); + + const uint16_t Acc_buf_ch[] = { 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_ACC_Dis, Acc_buf_ch, 16, true); + + const uint16_t Point_One_buf_ch[] = { 0xDAB5, 0xBBD2, 0xE3B5, 0x2000 }; + dgusdisplay.WriteVariable(VP_Point_One_Dis, Point_One_buf_ch, 12, true); + + const uint16_t Point_Two_buf_ch[] = { 0xDAB5, 0xFEB6, 0xE3B5, 0x2000 }; + dgusdisplay.WriteVariable(VP_Point_Two_Dis, Point_Two_buf_ch, 12, true); + + const uint16_t Point_Three_buf_ch[] = { 0xDAB5, 0xFDC8, 0xE3B5, 0x2000 }; + dgusdisplay.WriteVariable(VP_Point_Three_Dis, Point_Three_buf_ch, 12, true); + + const uint16_t Point_Four_buf_ch[] = { 0xDAB5, 0xC4CB, 0xE3B5, 0x2000 }; + dgusdisplay.WriteVariable(VP_Point_Four_Dis, Point_Four_buf_ch, 12, true); + + const uint16_t Point_Five_buf_ch[] = { 0xDAB5, 0xE5CE, 0xE3B5, 0x2000 }; + dgusdisplay.WriteVariable(VP_Point_Five_Dis, Point_Five_buf_ch, 12, true); + + const uint16_t Extrusion_buf_ch[] = { 0xB7BC, 0xF6B3, 0xB7CD, 0x2000 }; + dgusdisplay.WriteVariable(VP_Extrusion_Dis, Extrusion_buf_ch, 12, true); + + const uint16_t HeatBed_buf_ch[] = { 0xC8C8, 0xB2B4, 0x2000 }; + dgusdisplay.WriteVariable(VP_HeatBed_Dis, HeatBed_buf_ch, 12, true); + + const uint16_t FactoryDefaults_buf_ch[] = { 0xD6BB, 0xB4B8, 0xF6B3, 0xA7B3, 0xE8C9, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_FactoryDefaults_Dis, FactoryDefaults_buf_ch, 16, true); + + const uint16_t StoreSetting_buf_ch[] = { 0xA3B1, 0xE6B4, 0xE8C9, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_StoreSetting_Dis, StoreSetting_buf_ch, 16, true); + + const uint16_t PrintPauseConfig_buf_ch[] = { 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_PrintPauseConfig_Dis, PrintPauseConfig_buf_ch, 32, true); + + const uint16_t X_Pluse_buf_ch[] = { 0x2058, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_X_Pluse_Dis, X_Pluse_buf_ch, 16, true); + + const uint16_t Y_Pluse_buf_ch[] = { 0x2059, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_Y_Pluse_Dis, Y_Pluse_buf_ch, 16, true); + + const uint16_t Z_Pluse_buf_ch[] = { 0x205A, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_Z_Pluse_Dis, Z_Pluse_buf_ch, 16, true); + + const uint16_t E0_Pluse_buf_ch[] = { 0x3045, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_E0_Pluse_Dis, E0_Pluse_buf_ch, 16, true); + + const uint16_t E1_Pluse_buf_ch[] = { 0x3145, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_E1_Pluse_Dis, E1_Pluse_buf_ch, 16, true); + + const uint16_t X_Max_Speed_buf_ch[] = { 0x2058, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_X_Max_Speed_Dis, X_Max_Speed_buf_ch, 16, true); + + const uint16_t Y_Max_Speed_buf_ch[] = { 0x2059, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Y_Max_Speed_Dis, Y_Max_Speed_buf_ch, 16, true); + + const uint16_t Z_Max_Speed_buf_ch[] = { 0x205A, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Z_Max_Speed_Dis, Z_Max_Speed_buf_ch, 16, true); + + const uint16_t E0_Max_Speed_buf_ch[] = { 0x3045, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_E0_Max_Speed_Dis, E0_Max_Speed_buf_ch, 16, true); + + const uint16_t E1_Max_Speed_buf_ch[] = { 0x3145, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_E1_Max_Speed_Dis, E1_Max_Speed_buf_ch, 16, true); + + const uint16_t X_Max_Acc_Speed_buf_ch[] = { 0x2058, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_X_Max_Acc_Speed_Dis, X_Max_Acc_Speed_buf_ch, 16, true); + + const uint16_t Y_Max_Acc_Speed_buf_ch[] = { 0x2059, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Y_Max_Acc_Speed_Dis, Y_Max_Acc_Speed_buf_ch, 16, true); + + const uint16_t Z_Max_Acc_Speed_buf_ch[] = { 0x205A, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Z_Max_Acc_Speed_Dis, Z_Max_Acc_Speed_buf_ch, 16, true); + + const uint16_t E0_Max_Acc_Speed_buf_ch[] = { 0x3045, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_E0_Max_Acc_Speed_Dis, E0_Max_Acc_Speed_buf_ch, 16, true); + + const uint16_t E1_Max_Acc_Speed_buf_ch[] = { 0x3145, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_E1_Max_Acc_Speed_Dis, E1_Max_Acc_Speed_buf_ch, 16, true); + + const uint16_t X_PARK_POS_buf_ch[] = { 0x2058, 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_X_PARK_POS_Dis, X_PARK_POS_buf_ch, 16, true); + + const uint16_t Y_PARK_POS_buf_ch[] = { 0x2059, 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Y_PARK_POS_Dis, Y_PARK_POS_buf_ch, 16, true); + + const uint16_t Z_PARK_POS_buf_ch[] = { 0x205A, 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Z_PARK_POS_Dis, Z_PARK_POS_buf_ch, 16, true); + + const uint16_t Length_buf_ch[] = { 0xBDB2, 0xA4B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_Length_Dis, Length_buf_ch, 8, true); + + const uint16_t Speed_buf_ch[] = { 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Speed_Dis, Speed_buf_ch, 8, true); + + const uint16_t InOut_buf_ch[] = { 0xF8BD, 0xF6B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_InOut_Dis, InOut_buf_ch, 8, true); + + const uint16_t PrintTimet_buf_en[] = { 0xF2B4, 0xA1D3, 0xB1CA, 0xE4BC, 0x2000 }; + dgusdisplay.WriteVariable(VP_PrintTime_Dis, PrintTimet_buf_en, 16, true); + + const uint16_t E0_Temp_buf_ch[] = { 0x3045, 0xC2CE, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_E0_Temp_Dis, E0_Temp_buf_ch, 16, true); + + const uint16_t E1_Temp_buf_ch[] = { 0x3145, 0xC2CE, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_E1_Temp_Dis, E1_Temp_buf_ch, 16, true); + + const uint16_t HB_Temp_buf_ch[] = { 0xC8C8, 0xB2B4, 0xC2CE, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_HB_Temp_Dis, HB_Temp_buf_ch, 16, true); + + const uint16_t Feedrate_buf_ch[] = { 0xB7BC, 0xF6B3, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Feedrate_Dis, Feedrate_buf_ch, 16, true); + + const uint16_t PrintAcc_buf_ch[] = { 0xF2B4, 0xA1D3, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_PrintAcc_Dis, PrintAcc_buf_ch, 16, true); + + const uint16_t FAN_Speed_buf_ch[] = { 0xE7B7, 0xC8C9, 0xD9CB, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_FAN_Speed_Dis, FAN_Speed_buf_ch, 16, true); + + const uint16_t Printing_buf_ch[] = { 0xF2B4, 0xA1D3, 0xD0D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Printing_Dis, Printing_buf_ch, 16, true); + + const uint16_t Info_EEPROM_1_buf_ch[] = { 0xC7CA, 0xF1B7, 0xA3B1, 0xE6B4, 0xE8C9, 0xC3D6, 0xBFA3, 0x2000 }; + dgusdisplay.WriteVariable(VP_Info_EEPROM_1_Dis, Info_EEPROM_1_buf_ch, 32, true); + + const uint16_t Info_EEPROM_2_buf_ch[] = { 0xC7CA, 0xF1B7, 0xD6BB, 0xB4B8, 0xF6B3, 0xA7B3, 0xE8C9, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Info_EEPROM_2_Dis, Info_EEPROM_2_buf_ch, 32, true); + + const uint16_t TMC_X_Step_buf_ch[] = { 0x2058, 0xE9C1, 0xF4C3, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_X_Step_Dis, TMC_X_Step_buf_ch, 16, true); + + const uint16_t TMC_Y_Step_buf_ch[] = { 0x2059, 0xE9C1, 0xF4C3, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_Y_Step_Dis, TMC_Y_Step_buf_ch, 16, true); + + const uint16_t TMC_Z_Step_buf_ch[] = { 0x205A, 0xE9C1, 0xF4C3, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_Z_Step_Dis, TMC_Z_Step_buf_ch, 16, true); + + const uint16_t Info_PrinfFinsh_1_buf_ch[] = { 0xF2B4, 0xA1D3, 0xEACD, 0xC9B3, 0x2000 }; + dgusdisplay.WriteVariable(VP_Info_PrinfFinsh_1_Dis, Info_PrinfFinsh_1_buf_ch, 32, true); + + const uint16_t TMC_X_Current_buf_ch[] = { 0x2058, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_X_Current_Dis, TMC_X_Current_buf_ch, 16, true); + + const uint16_t TMC_Y_Current_buf_ch[] = { 0x2059, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_Y_Current_Dis, TMC_Y_Current_buf_ch, 16, true); + + const uint16_t TMC_Z_Current_buf_ch[] = { 0x205A, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_Z_Current_Dis, TMC_Z_Current_buf_ch, 16, true); + + const uint16_t TMC_E0_Current_buf_ch[] = { 0x3045, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_E0_Current_Dis, TMC_E0_Current_buf_ch, 16, true); + + const uint16_t TMC_X1_Current_buf_ch[] = { 0x3158, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_X1_Current_Dis, TMC_X1_Current_buf_ch, 16, true); + + const uint16_t TMC_Y1_Current_buf_ch[] = { 0x3159, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_Y1_Current_Dis, TMC_Y1_Current_buf_ch, 16, true); + + const uint16_t TMC_Z1_Current_buf_ch[] = { 0x315A, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_Z1_Current_Dis, TMC_Z1_Current_buf_ch, 16, true); + + const uint16_t TMC_E1_Current_buf_ch[] = { 0x3145, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 }; + dgusdisplay.WriteVariable(VP_TMC_E1_Current_Dis, TMC_E1_Current_buf_ch, 16, true); + + const uint16_t Min_Ex_Temp_buf_ch[] = { 0xEED7, 0xA1D0, 0xB7BC, 0xF6B3, 0xC2CE, 0xC8B6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Min_Ex_Temp_Dis, Min_Ex_Temp_buf_ch, 32, true); + + const uint16_t AutoLEVEL_INFO1_buf_ch[] = { 0xEBC7, 0xB4B0, 0xC2CF, 0xB4B0, 0xA5C5, 0x2000 }; + dgusdisplay.WriteVariable(VP_AutoLEVEL_INFO1, AutoLEVEL_INFO1_buf_ch, 32, true); + + const uint16_t EX_TEMP_INFO2_buf_ch[] = { 0xEBC7, 0xD4C9, 0xC8B5, 0x2000 }; + dgusdisplay.WriteVariable(VP_EX_TEMP_INFO2_Dis, EX_TEMP_INFO2_buf_ch, 32, true); + + const uint16_t EX_TEMP_INFO3_buf_ch[] = { 0xA1C8, 0xFBCF, 0xD3BC, 0xC8C8, 0x2000 }; + dgusdisplay.WriteVariable(VP_EX_TEMP_INFO3_Dis, EX_TEMP_INFO3_buf_ch, 32, true); + + const uint16_t PrintConfrim_Info_buf_ch[] = { 0xC7CA, 0xF1B7, 0xAABF, 0xBCCA, 0xF2B4, 0xA1D3, 0x2000 }; + dgusdisplay.WriteVariable(VP_PrintConfrim_Info_Dis, PrintConfrim_Info_buf_ch, 32, true); + + const uint16_t StopPrintConfrim_Info_buf_ch[] = { 0xC7CA, 0xF1B7, 0xA3CD, 0xB9D6, 0xF2B4, 0xA1D3, 0x2000 }; + dgusdisplay.WriteVariable(VP_StopPrintConfrim_Info_Dis, StopPrintConfrim_Info_buf_ch, 32, true); + + const uint16_t Printting_buf_ch[] = { 0xF2B4, 0xA1D3, 0xD0D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_Printting_Dis, Printting_buf_ch, 32, true); + + const uint16_t LCD_BLK_buf_ch[] = { 0xB3B1, 0xE2B9, 0xE8C9, 0xC3D6, 0x2000 }; + dgusdisplay.WriteVariable(VP_LCD_BLK_Dis, LCD_BLK_buf_ch, 32, true); + } +} + +#endif // DGUS_LCD_UI_MKS diff --git a/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h new file mode 100644 index 0000000000..4d6e985d84 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.h @@ -0,0 +1,307 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../DGUSDisplay.h" +#include "../DGUSVPVariable.h" +#include "../DGUSDisplayDef.h" + +#include "../../../../../inc/MarlinConfig.h" + +enum DGUSLCD_Screens : uint8_t; + +class DGUSScreenHandler { +public: + DGUSScreenHandler() = default; + + static bool loop(); + + // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen + // The bools specifing whether the strings are in RAM or FLASH. + static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + static void sendinfoscreen_ch_mks(const uint16_t* line1, const uint16_t* line2, const uint16_t* line3, const uint16_t* line4); + static void sendinfoscreen_en_mks(const char* line1, const char* line2, const char* line3, const char* line4) ; + static void sendinfoscreen_mks(const void* line1, const void* line2, const void* line3, const void* line4,uint16_t language); + + // "M117" Message -- msg is a RAM ptr. + static void setstatusmessage(const char* msg); + // The same for messages from Flash + static void setstatusmessagePGM(PGM_P const msg); + // Callback for VP "Display wants to change screen on idle printer" + static void ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ptr); + // Callback for VP "Screen has been changed" + static void ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr); + + static void ScreenBackChange(DGUS_VP_Variable &var, void *val_ptr); + + // Callback for VP "All Heaters Off" + static void HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change this temperature" + static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change Flowrate" + static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + // Hook for manual move option + static void HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr); + #endif + + static void EEPROM_CTRL(DGUS_VP_Variable &var, void *val_ptr); + static void LanguageChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void GetOffsetValue(DGUS_VP_Variable &var, void *val_ptr); + static void Level_Ctrl_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void MeshLevel(DGUS_VP_Variable &var, void *val_ptr); + static void MeshLevelDistanceConfig(DGUS_VP_Variable &var, void *val_ptr); + static void ManualAssistLeveling(DGUS_VP_Variable &var, void *val_ptr); + static void ZoffsetConfirm(DGUS_VP_Variable &var, void *val_ptr); + static void Z_offset_select(DGUS_VP_Variable &var, void *val_ptr); + static void GetManualMovestep(DGUS_VP_Variable &var, void *val_ptr); + static void GetZoffsetDistance(DGUS_VP_Variable &var, void *val_ptr); + static void GetMinExtrudeTemp(DGUS_VP_Variable &var, void *val_ptr); + static void GetParkPos_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleGetExMinTemp_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void DGUS_LanguageDisplay(uint8_t var); + static void TMC_ChangeConfig(DGUS_VP_Variable &var, void *val_ptr); + static void GetTurnOffCtrl(DGUS_VP_Variable &var, void *val_ptr); + static void LanguagePInit(void); + static void DGUS_Runout_Idle(void); + static void DGUS_RunoutInit(void); + static void DGUS_ExtrudeLoadInit(void); + static void LCD_BLK_Adjust(DGUS_VP_Variable &var, void *val_ptr); + + // Hook for manual move. + static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr); + // Hook for manual extrude. + static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr); + // Hook for motor lock and unlook + static void HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(POWER_LOSS_RECOVERY) + // Hook for power loss recovery. + static void HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for settings + static void HandleSettings(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr); + + static void HandleStepPerMMChanged_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMExtruderChanged_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleMaxSpeedChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleExtruderMaxSpeedChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleMaxAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleExtruderAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleChangeLevelPoint_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleTravelAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleFeedRateMinChange_MKS(DGUS_VP_Variable &var, void *val_ptr); + static void HandleMin_T_F_MKS(DGUS_VP_Variable &var, void *val_ptr); + + #if HAS_PID_HEATING + // Hook for "Change this temperature PID para" + static void HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for PID autotune + static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_BED_PROBE + // Hook for "Change probe offset z" + static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(BABYSTEPPING) + // Hook for live z adjust action + static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_FAN + // Hook for fan control + static void HandleFanControl(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for heater control + static void HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_PREHEAT_UI) + // Hook for preheat + static void HandlePreheat(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + // Hook for filament load and unload filament option + static void HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr); + // Hook for filament load and unload + static void HandleFilamentLoadUnload(DGUS_VP_Variable &var); + + static void MKS_FilamentLoad(DGUS_VP_Variable &var, void *val_ptr); + static void MKS_FilamentUnLoad(DGUS_VP_Variable &var, void *val_ptr); + static void MKS_LOAD_UNLOAD_IDLE(); + static void MKS_LOAD_Cancle(DGUS_VP_Variable &var, void *val_ptr); + static void GetManualFilament(DGUS_VP_Variable &var, void *val_ptr); + static void GetManualFilamentSpeed(DGUS_VP_Variable &var, void *val_ptr); + #endif + + #if ENABLED(SDSUPPORT) + // Callback for VP "Display wants to change screen when there is a SD card" + static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr); + // Scroll buttons on the file listing screen. + static void DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable &var, void *val_ptr); + // File touched. + static void DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr); + // start print after confirmation received. + static void DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr); + // User hit the pause, resume or abort button. + static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr); + // User confirmed the abort action + static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr); + // User hit the tune button + static void DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr); + // Send a single filename to the display. + static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var); + // Marlin informed us that a new SD has been inserted. + static void SDCardInserted(); + // Marlin informed us that the SD Card has been removed(). + static void SDCardRemoved(); + // Marlin informed us about a bad SD Card. + static void SDCardError(); + // Marlin informed us about SD print completion. + static void SDPrintingFinished(); + #endif + + // OK Button the Confirm screen. + static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr); + + // Update data after went to new screen (by display or by GotoScreen) + // remember: store the last-displayed screen, so it can get returned to. + // (e.g for pop up messages) + static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false); + + // Recall the remembered screen. + static void PopToOldScreen(); + + // Make the display show the screen and update all VPs in it. + static void GotoScreen(DGUSLCD_Screens screen, bool ispopup = false); + + static void UpdateScreenVPData(); + + // Helpers to convert and transfer data to the display. + static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var); + static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var); + static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintProgressToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var); + + static void DGUSLCD_SendPrintTimeToDisplay_MKS(DGUS_VP_Variable &var); + static void DGUSLCD_SendBabyStepToDisplay_MKS(DGUS_VP_Variable &var); + static void DGUSLCD_SendFanToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendGbkToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplay_Language_MKS(DGUS_VP_Variable &var); + static void DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var); + + #if ENABLED(PRINTCOUNTER) + static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var); + #endif + #if HAS_FAN + static void DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var); + #endif + static void DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var); + #if ENABLED(DGUS_UI_WAITING) + static void DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var); + #endif + + // Send a value from 0..100 to a variable with a range from 0..255 + static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr); + + static void DGUSLCD_SetUint8(DGUS_VP_Variable &var, void *val_ptr); + + template + static void DGUSLCD_SetValueDirectly(DGUS_VP_Variable &var, void *val_ptr) { + if (!var.memadr) return; + union { unsigned char tmp[sizeof(T)]; T t; } x; + unsigned char *ptr = (unsigned char*)val_ptr; + LOOP_L_N(i, sizeof(T)) x.tmp[i] = ptr[sizeof(T) - i - 1]; + *(T*)var.memadr = x.t; + } + + // Send a float value to the display. + // Display will get a 4-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsLongValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (long)f); + } + } + + // Send a float value to the display. + // Display will get a 2-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsIntValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + DEBUG_ECHOLNPAIR_F(" >> ", f, 6); + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (int16_t)f); + } + } + + // Force an update of all VP on the current screen. + static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; } + // Has all VPs sent to the screen + static inline bool IsScreenComplete() { return ScreenComplete; } + + static inline DGUSLCD_Screens getCurrentScreen() { return current_screen; } + + static inline void SetupConfirmAction( void (*f)()) { confirm_action_cb = f; } + +private: + static DGUSLCD_Screens current_screen; //< currently on screen + static constexpr uint8_t NUM_PAST_SCREENS = 4; + static DGUSLCD_Screens past_screens[NUM_PAST_SCREENS]; //< LIFO with past screens for the "back" button. + + static uint8_t update_ptr; //< Last sent entry in the VPList for the actual screen. + static uint16_t skipVP; //< When updating the screen data, skip this one, because the user is interacting with it. + static bool ScreenComplete; //< All VPs sent to screen? + + static uint16_t ConfirmVP; //< context for confirm screen (VP that will be emulated-sent on "OK"). + + #if ENABLED(SDSUPPORT) + static int16_t top_file; //< file on top of file chooser + static int16_t file_to_print; //< touched file to be confirmed + #endif + + static void (*confirm_action_cb)(); +}; + +#define MKS_Language_Choose 0x00 +#define MKS_Language_NoChoose 0x01 + +#define MKS_SimpleChinese 0 +#define MKS_English 1 +extern uint8_t DGUSLanguageSwitch; +extern bool DGUSAutoTurnOff; + +#if ENABLED(POWER_LOSS_RECOVERY) + #define PLR_SCREEN_RECOVER MKSLCD_SCREEN_PRINT + #define PLR_SCREEN_CANCEL MKSLCD_SCREEN_HOME +#endif diff --git a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp index 28e66e5d7c..8d89de3e33 100644 --- a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp +++ b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp @@ -20,7 +20,9 @@ * */ -/* DGUS implementation written by coldtobi in 2019 for Marlin */ +/** + * lcd/extui/lib/dgus/origin/DGUSDisplayDef.cpp + */ #include "../../../../../inc/MarlinConfigPre.h" @@ -87,7 +89,7 @@ const uint16_t VPList_Status[] PROGMEM = { }; const uint16_t VPList_Status2[] PROGMEM = { - /* VP_M117, for completeness, but it cannot be auto-uploaded */ + // VP_M117, for completeness, but it cannot be auto-uploaded #if HOTENDS >= 1 VP_Flowrate_E0, #endif diff --git a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.cpp new file mode 100644 index 0000000000..f1d91371c2 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.cpp @@ -0,0 +1,418 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_ORIGIN) + +#include "../DGUSScreenHandler.h" + +#include "../../../../../MarlinCore.h" +#include "../../../../../gcode/queue.h" +#include "../../../../../libs/duration_t.h" +#include "../../../../../module/settings.h" +#include "../../../../../module/temperature.h" +#include "../../../../../module/motion.h" +#include "../../../../../module/planner.h" +#include "../../../../../module/printcounter.h" +#include "../../../../../sd/cardreader.h" + +#if ENABLED(POWER_LOSS_RECOVERY) + #include "../../../../feature/powerloss.h" +#endif + +#if ENABLED(SDSUPPORT) + + void DGUSScreenHandler::DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t touched_nr = (int16_t)swap16(*(uint16_t*)val_ptr) + top_file; + if (touched_nr > filelist.count()) return; + if (!filelist.seek(touched_nr)) return; + + if (filelist.isDir()) { + filelist.changeDir(filelist.filename()); + top_file = 0; + ForceCompleteUpdate(); + return; + } + + #if ENABLED(DGUS_PRINT_FILENAME) + // Send print filename + dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), VP_SD_FileName_LEN, true); + #endif + + // Setup Confirmation screen + file_to_print = touched_nr; + + HandleUserConfirmationPopUp(VP_SD_FileSelectConfirm, nullptr, PSTR("Print file"), filelist.filename(), PSTR("from SD Card?"), true, true, false, true); + } + + void DGUSScreenHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) { + if (!filelist.seek(file_to_print)) return; + ExtUI::printFile(filelist.shortFilename()); + GotoScreen(DGUSLCD_SCREEN_STATUS); + } + + void DGUSScreenHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) { + + if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes. + switch (swap16(*(uint16_t*)val_ptr)) { + case 0: { // Resume + if (ExtUI::isPrintingFromMediaPaused()) { + ExtUI::resumePrint(); + } + } break; + + case 1: // Pause + + GotoScreen(MKSLCD_SCREEN_PAUSE); + if (!ExtUI::isPrintingFromMediaPaused()) { + ExtUI::pausePrint(); + //ExtUI::mks_pausePrint(); + } + break; + case 2: // Abort + HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true); + break; + } + } + + void DGUSScreenHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) { + uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN; + if (target_line > DGUS_SD_FILESPERSCREEN) return; + char tmpfilename[VP_SD_FileName_LEN + 1] = ""; + var.memadr = (void*)tmpfilename; + + if (filelist.seek(top_file + target_line)) { + snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s%c"), filelist.filename(), filelist.isDir() ? '/' : 0); // snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s"), filelist.filename()); + } + DGUSLCD_SendStringToDisplay(var); + } + + void DGUSScreenHandler::SDCardInserted() { + top_file = 0; + filelist.refresh(); + auto cs = getCurrentScreen(); + if (cs == DGUSLCD_SCREEN_MAIN || cs == DGUSLCD_SCREEN_STATUS) + GotoScreen(DGUSLCD_SCREEN_SDFILELIST); + } + + void DGUSScreenHandler::SDCardRemoved() { + if (current_screen == DGUSLCD_SCREEN_SDFILELIST + || (current_screen == DGUSLCD_SCREEN_CONFIRM && (ConfirmVP == VP_SD_AbortPrintConfirmed || ConfirmVP == VP_SD_FileSelectConfirm)) + || current_screen == DGUSLCD_SCREEN_SDPRINTMANIPULATION + ) GotoScreen(DGUSLCD_SCREEN_MAIN); + } + +#endif // SDSUPPORT + +void DGUSScreenHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr) { + uint8_t *tmp = (uint8_t*)val_ptr; + + // The keycode in target is coded as , so 0x0100A means + // from screen 1 (main) to 10 (temperature). DGUSLCD_SCREEN_POPUP is special, + // meaning "return to previous screen" + DGUSLCD_Screens target = (DGUSLCD_Screens)tmp[1]; + + DEBUG_ECHOLNPAIR("\n DEBUG target", target); + + if (target == DGUSLCD_SCREEN_POPUP) { + // Special handling for popup is to return to previous menu + if (current_screen == DGUSLCD_SCREEN_POPUP && confirm_action_cb) confirm_action_cb(); + PopToOldScreen(); + return; + } + + UpdateNewScreen(target); + + #ifdef DEBUG_DGUSLCD + if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPAIR("WARNING: No screen Mapping found for ", target); + #endif +} + +void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleManualMove"); + + int16_t movevalue = swap16(*(uint16_t*)val_ptr); + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + if (movevalue) { + const uint16_t choice = *(uint16_t*)var.memadr; + movevalue = movevalue < 0 ? -choice : choice; + } + #endif + char axiscode; + unsigned int speed = 1500; // FIXME: get default feedrate for manual moves, dont hardcode. + + switch (var.VP) { + default: return; + + case VP_MOVE_X: + axiscode = 'X'; + if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove; + break; + + case VP_MOVE_Y: + axiscode = 'Y'; + if (!ExtUI::canMove(ExtUI::axis_t::Y)) goto cannotmove; + break; + + case VP_MOVE_Z: + axiscode = 'Z'; + speed = 300; // default to 5mm/s + if (!ExtUI::canMove(ExtUI::axis_t::Z)) goto cannotmove; + break; + + case VP_HOME_ALL: // only used for homing + axiscode = '\0'; + movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing. + break; + } + + if (!movevalue) { + // homing + DEBUG_ECHOPAIR(" homing ", axiscode); + char buf[6] = "G28 X"; + buf[4] = axiscode; + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); + //DEBUG_ECHOLNPGM(" ✓"); + ForceCompleteUpdate(); + return; + } + else { + // movement + DEBUG_ECHOPAIR(" move ", axiscode); + bool old_relative_mode = relative_mode; + if (!relative_mode) { + //DEBUG_ECHOPGM(" G91"); + queue.enqueue_now_P(PSTR("G91")); + //DEBUG_ECHOPGM(" ✓ "); + } + char buf[32]; // G1 X9999.99 F12345 + unsigned int backup_speed = MMS_TO_MMM(feedrate_mm_s); + char sign[] = "\0"; + int16_t value = movevalue / 100; + if (movevalue < 0) { value = -value; sign[0] = '-'; } + int16_t fraction = ABS(movevalue) % 100; + snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed); + //DEBUG_ECHOPAIR(" ", buf); + queue.enqueue_one_now(buf); + //DEBUG_ECHOLNPGM(" ✓ "); + if (backup_speed != speed) { + snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed); + queue.enqueue_one_now(buf); + //DEBUG_ECHOPAIR(" ", buf); + } + // while (!enqueue_and_echo_command(buf)) idle(); + //DEBUG_ECHOLNPGM(" ✓ "); + if (!old_relative_mode) { + //DEBUG_ECHOPGM("G90"); + queue.enqueue_now_P(PSTR("G90")); + //DEBUG_ECHOPGM(" ✓ "); + } + } + + ForceCompleteUpdate(); + DEBUG_ECHOLNPGM("manmv done."); + return; + + cannotmove: + DEBUG_ECHOLNPAIR(" cannot move ", axiscode); + return; +} + +#if HAS_PID_HEATING + void DGUSScreenHandler::HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr) { + uint16_t rawvalue = swap16(*(uint16_t*)val_ptr); + DEBUG_ECHOLNPAIR("V1:", rawvalue); + float value = (float)rawvalue / 10; + DEBUG_ECHOLNPAIR("V2:", value); + float newvalue = 0; + + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_PID_P: newvalue = value; break; + case VP_E0_PID_I: newvalue = scalePID_i(value); break; + case VP_E0_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HOTENDS >= 2 + case VP_E1_PID_P: newvalue = value; break; + case VP_E1_PID_I: newvalue = scalePID_i(value); break; + case VP_E1_PID_D: newvalue = scalePID_d(value); break; + #endif + #if HAS_HEATED_BED + case VP_BED_PID_P: newvalue = value; break; + case VP_BED_PID_I: newvalue = scalePID_i(value); break; + case VP_BED_PID_D: newvalue = scalePID_d(value); break; + #endif + } + + DEBUG_ECHOLNPAIR_F("V3:", newvalue); + *(float *)var.memadr = newvalue; + + skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel + } +#endif // HAS_PID_HEATING + +#if ENABLED(BABYSTEPPING) + void DGUSScreenHandler::HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleLiveAdjustZ"); + int16_t flag = swap16(*(uint16_t*)val_ptr), + steps = flag ? -20 : 20; + ExtUI::smartAdjustAxis_steps(steps, ExtUI::axis_t::Z, true); + ForceCompleteUpdate(); + } +#endif + +#if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + + void DGUSScreenHandler::HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr) { + DEBUG_ECHOLNPGM("HandleFilamentOption"); + + uint8_t e_temp = 0; + filament_data.heated = false; + uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); + if (preheat_option <= 8) { // Load filament type + filament_data.action = 1; + } + else if (preheat_option >= 10) { // Unload filament type + preheat_option -= 10; + filament_data.action = 2; + filament_data.purge_length = DGUS_FILAMENT_PURGE_LENGTH; + } + else { // Cancel filament operation + filament_data.action = 0; + } + + switch (preheat_option) { + case 0: // Load PLA + #ifdef PREHEAT_1_TEMP_HOTEND + e_temp = PREHEAT_1_TEMP_HOTEND; + #endif + break; + case 1: // Load ABS + TERN_(PREHEAT_2_TEMP_HOTEND, e_temp = PREHEAT_2_TEMP_HOTEND); + break; + case 2: // Load PET + #ifdef PREHEAT_3_TEMP_HOTEND + e_temp = PREHEAT_3_TEMP_HOTEND; + #endif + break; + case 3: // Load FLEX + #ifdef PREHEAT_4_TEMP_HOTEND + e_temp = PREHEAT_4_TEMP_HOTEND; + #endif + break; + case 9: // Cool down + default: + e_temp = 0; + break; + } + + if (filament_data.action == 0) { // Go back to utility screen + #if HOTENDS >= 1 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0); + #endif + #if HOTENDS >= 2 + thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1); + #endif + GotoScreen(DGUSLCD_SCREEN_UTILITY); + } + else { // Go to the preheat screen to show the heating progress + switch (var.VP) { + default: return; + #if HOTENDS >= 1 + case VP_E0_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E0; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + #if HOTENDS >= 2 + case VP_E1_FILAMENT_LOAD_UNLOAD: + filament_data.extruder = ExtUI::extruder_t::E1; + thermalManager.setTargetHotend(e_temp, filament_data.extruder); + break; + #endif + } + GotoScreen(DGUSLCD_SCREEN_FILAMENT_HEATING); + } + } + + void DGUSScreenHandler::HandleFilamentLoadUnload(DGUS_VP_Variable &var) { + DEBUG_ECHOLNPGM("HandleFilamentLoadUnload"); + if (filament_data.action <= 0) return; + + // If we close to the target temperature, we can start load or unload the filament + if (thermalManager.hotEnoughToExtrude(filament_data.extruder) && \ + thermalManager.targetHotEnoughToExtrude(filament_data.extruder)) { + float movevalue = DGUS_FILAMENT_LOAD_LENGTH_PER_TIME; + + if (filament_data.action == 1) { // load filament + if (!filament_data.heated) { + //GotoScreen(DGUSLCD_SCREEN_FILAMENT_LOADING); + filament_data.heated = true; + } + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + } + else { // unload filament + if (!filament_data.heated) { + GotoScreen(DGUSLCD_SCREEN_FILAMENT_UNLOADING); + filament_data.heated = true; + } + // Before unloading extrude to prevent jamming + if (filament_data.purge_length >= 0) { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue; + filament_data.purge_length -= movevalue; + } + else { + movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) - movevalue; + } + } + ExtUI::setAxisPosition_mm(movevalue, filament_data.extruder); + } + } +#endif // DGUS_FILAMENT_LOADUNLOAD + +bool DGUSScreenHandler::loop() { + dgusdisplay.loop(); + + const millis_t ms = millis(); + static millis_t next_event_ms = 0; + + if (!IsScreenComplete() || ELAPSED(ms, next_event_ms)) { + next_event_ms = ms + DGUS_UPDATE_INTERVAL_MS; + UpdateScreenVPData(); + } + + #if ENABLED(SHOW_BOOTSCREEN) + static bool booted = false; + + if (!booted && TERN0(POWER_LOSS_RECOVERY, recovery.valid())) + booted = true; + + if (!booted && ELAPSED(ms, TERN(USE_MKS_GREEN_UI, 1000, BOOTSCREEN_TIMEOUT))) + booted = true; + #endif + return IsScreenComplete(); +} + +#endif // DGUS_LCD_UI_ORIGIN diff --git a/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h new file mode 100644 index 0000000000..28ab952e53 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/origin/DGUSScreenHandler.h @@ -0,0 +1,240 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../DGUSDisplay.h" +#include "../DGUSVPVariable.h" +#include "../DGUSDisplayDef.h" + +#include "../../../../../inc/MarlinConfig.h" + +enum DGUSLCD_Screens : uint8_t; + +class DGUSScreenHandler { +public: + DGUSScreenHandler() = default; + + static bool loop(); + + // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen + // The bools specifing whether the strings are in RAM or FLASH. + static void sendinfoscreen(const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char* line1, const char* line2, const char* line3, const char* line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash); + + // "M117" Message -- msg is a RAM ptr. + static void setstatusmessage(const char* msg); + // The same for messages from Flash + static void setstatusmessagePGM(PGM_P const msg); + // Callback for VP "Display wants to change screen on idle printer" + static void ScreenChangeHookIfIdle(DGUS_VP_Variable &var, void *val_ptr); + // Callback for VP "Screen has been changed" + static void ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr); + + // Callback for VP "All Heaters Off" + static void HandleAllHeatersOff(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change this temperature" + static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for "Change Flowrate" + static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + // Hook for manual move option + static void HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr); + #endif + + // Hook for manual move. + static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr); + // Hook for manual extrude. + static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr); + // Hook for motor lock and unlook + static void HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(POWER_LOSS_RECOVERY) + // Hook for power loss recovery. + static void HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for settings + static void HandleSettings(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr); + static void HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr); + + #if HAS_PID_HEATING + // Hook for "Change this temperature PID para" + static void HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr); + // Hook for PID autotune + static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_BED_PROBE + // Hook for "Change probe offset z" + static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(BABYSTEPPING) + // Hook for live z adjust action + static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if HAS_FAN + // Hook for fan control + static void HandleFanControl(DGUS_VP_Variable &var, void *val_ptr); + #endif + // Hook for heater control + static void HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr); + #if ENABLED(DGUS_PREHEAT_UI) + // Hook for preheat + static void HandlePreheat(DGUS_VP_Variable &var, void *val_ptr); + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + // Hook for filament load and unload filament option + static void HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr); + // Hook for filament load and unload + static void HandleFilamentLoadUnload(DGUS_VP_Variable &var); + #endif + + #if ENABLED(SDSUPPORT) + // Callback for VP "Display wants to change screen when there is a SD card" + static void ScreenChangeHookIfSD(DGUS_VP_Variable &var, void *val_ptr); + // Scroll buttons on the file listing screen. + static void DGUSLCD_SD_ScrollFilelist(DGUS_VP_Variable &var, void *val_ptr); + // File touched. + static void DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr); + // start print after confirmation received. + static void DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr); + // User hit the pause, resume or abort button. + static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr); + // User confirmed the abort action + static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr); + // User hit the tune button + static void DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr); + // Send a single filename to the display. + static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var); + // Marlin informed us that a new SD has been inserted. + static void SDCardInserted(); + // Marlin informed us that the SD Card has been removed(). + static void SDCardRemoved(); + // Marlin informed us about a bad SD Card. + static void SDCardError(); + #endif + + // OK Button the Confirm screen. + static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr); + + // Update data after went to new screen (by display or by GotoScreen) + // remember: store the last-displayed screen, so it can get returned to. + // (e.g for pop up messages) + static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false); + + // Recall the remembered screen. + static void PopToOldScreen(); + + // Make the display show the screen and update all VPs in it. + static void GotoScreen(DGUSLCD_Screens screen, bool ispopup = false); + + static void UpdateScreenVPData(); + + // Helpers to convert and transfer data to the display. + static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var); + static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var); + static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintProgressToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var); + + #if ENABLED(PRINTCOUNTER) + static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var); + static void DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var); + #endif + #if HAS_FAN + static void DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var); + #endif + static void DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var); + #if ENABLED(DGUS_UI_WAITING) + static void DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var); + #endif + + // Send a value from 0..100 to a variable with a range from 0..255 + static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr); + + template + static void DGUSLCD_SetValueDirectly(DGUS_VP_Variable &var, void *val_ptr) { + if (!var.memadr) return; + union { unsigned char tmp[sizeof(T)]; T t; } x; + unsigned char *ptr = (unsigned char*)val_ptr; + LOOP_L_N(i, sizeof(T)) x.tmp[i] = ptr[sizeof(T) - i - 1]; + *(T*)var.memadr = x.t; + } + + // Send a float value to the display. + // Display will get a 4-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsLongValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (long)f); + } + } + + // Send a float value to the display. + // Display will get a 2-byte integer scaled to the number of digits: + // Tell the display the number of digits and it cheats by displaying a dot between... + template + static void DGUSLCD_SendFloatAsIntValueToDisplay(DGUS_VP_Variable &var) { + if (var.memadr) { + float f = *(float *)var.memadr; + DEBUG_ECHOLNPAIR_F(" >> ", f, 6); + f *= cpow(10, decimals); + dgusdisplay.WriteVariable(var.VP, (int16_t)f); + } + } + + // Force an update of all VP on the current screen. + static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; } + // Has all VPs sent to the screen + static inline bool IsScreenComplete() { return ScreenComplete; } + + static inline DGUSLCD_Screens getCurrentScreen() { return current_screen; } + + static inline void SetupConfirmAction( void (*f)()) { confirm_action_cb = f; } + +private: + static DGUSLCD_Screens current_screen; //< currently on screen + static constexpr uint8_t NUM_PAST_SCREENS = 4; + static DGUSLCD_Screens past_screens[NUM_PAST_SCREENS]; //< LIFO with past screens for the "back" button. + + static uint8_t update_ptr; //< Last sent entry in the VPList for the actual screen. + static uint16_t skipVP; //< When updating the screen data, skip this one, because the user is interacting with it. + static bool ScreenComplete; //< All VPs sent to screen? + + static uint16_t ConfirmVP; //< context for confirm screen (VP that will be emulated-sent on "OK"). + + #if ENABLED(SDSUPPORT) + static int16_t top_file; //< file on top of file chooser + static int16_t file_to_print; //< touched file to be confirmed + #endif + + static void (*confirm_action_cb)(); +}; + +#if ENABLED(POWER_LOSS_RECOVERY) + #define PLR_SCREEN_RECOVER DGUSLCD_SCREEN_SDPRINTMANIPULATION + #define PLR_SCREEN_CANCEL DGUSLCD_SCREEN_STATUS +#endif diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.cpp index dbeb3796e0..039591b03e 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.cpp @@ -29,6 +29,8 @@ #include "../../../../gcode/queue.h" #include "../../../../inc/MarlinConfig.h" +extern const char G28_STR[]; + extern lv_group_t *g; static lv_obj_t *scr; diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.cpp index 2dec548af0..34c7161300 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.cpp @@ -38,8 +38,6 @@ static lv_task_t *updatePosTask; static char cur_label = 'Z'; static float cur_pos = 0; -void disp_cur_pos(); - enum { ID_M_X_P = 1, ID_M_X_N, @@ -51,6 +49,12 @@ enum { ID_M_RETURN }; +void disp_cur_pos() { + char str_1[16]; + sprintf_P(public_buf_l, PSTR("%c:%s mm"), cur_label, dtostrf(cur_pos, 1, 1, str_1)); + if (labelP) lv_label_set_text(labelP, public_buf_l); +} + static void event_handler(lv_obj_t *obj, lv_event_t event) { char str_1[16]; if (event != LV_EVENT_RELEASED) return; @@ -125,12 +129,6 @@ void lv_draw_move_motor() { disp_cur_pos(); } -void disp_cur_pos() { - char str_1[16]; - sprintf_P(public_buf_l, PSTR("%c:%s mm"), cur_label, dtostrf(cur_pos, 1, 1, str_1)); - if (labelP) lv_label_set_text(labelP, public_buf_l); -} - void disp_move_dist() { if ((int)(10 * uiCfg.move_dist) == 1) lv_imgbtn_set_src_both(buttonV, "F:/bmp_step_move0_1.bin"); diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp index 97200efb08..047a6cdb70 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp @@ -152,9 +152,9 @@ void lv_draw_ready_print() { limit_info = lv_label_create_empty(scr); lv_style_copy(&limit_style, &lv_style_scr); - limit_style.body.main_color.full = 0X0000; - limit_style.body.grad_color.full = 0X0000; - limit_style.text.color.full = 0Xffff; + limit_style.body.main_color.full = 0x0000; + limit_style.body.grad_color.full = 0x0000; + limit_style.text.color.full = 0xffff; lv_obj_set_style(limit_info, &limit_style); lv_obj_set_pos(limit_info, 20, 120); @@ -163,9 +163,9 @@ void lv_draw_ready_print() { det_info = lv_label_create_empty(scr); lv_style_copy(&det_style, &lv_style_scr); - det_style.body.main_color.full = 0X0000; - det_style.body.grad_color.full = 0X0000; - det_style.text.color.full = 0Xffff; + det_style.body.main_color.full = 0x0000; + det_style.body.grad_color.full = 0x0000; + det_style.text.color.full = 0xffff; lv_obj_set_style(det_info, &det_style); lv_obj_set_pos(det_info, 20, 145); diff --git a/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h b/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h index 0abfd7834a..19c93468e4 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h +++ b/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h @@ -116,7 +116,7 @@ #endif // Flash flag -#define REFLSHE_FLGA_ADD (0X800000-32) +#define REFLSHE_FLGA_ADD (0x800000-32) // SD card information first addr #define VAR_INF_ADDR 0x000000 diff --git a/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp b/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp index 5622956579..02ca16e007 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp @@ -1231,13 +1231,13 @@ void utf8_2_unicode(uint8_t *source, uint8_t Len) { while (1) { char_byte_num = source[i] & 0xF0; - if (source[i] < 0X80) { + if (source[i] < 0x80) { //ASCII --1byte FileName_unicode[char_i] = source[i]; i += 1; char_i += 1; } - else if (char_byte_num == 0XC0 || char_byte_num == 0XD0) { + else if (char_byte_num == 0xC0 || char_byte_num == 0xD0) { //--2byte u16_h = (((uint16_t)source[i] << 8) & 0x1F00) >> 2; u16_l = ((uint16_t)source[i + 1] & 0x003F); @@ -1247,7 +1247,7 @@ void utf8_2_unicode(uint8_t *source, uint8_t Len) { i += 2; char_i += 2; } - else if (char_byte_num == 0XE0) { + else if (char_byte_num == 0xE0) { //--3byte u16_h = (((uint16_t)source[i] << 8) & 0x0F00) << 4; u16_m = (((uint16_t)source[i + 1] << 8) & 0x3F00) >> 2; @@ -1258,7 +1258,7 @@ void utf8_2_unicode(uint8_t *source, uint8_t Len) { i += 3; char_i += 2; } - else if (char_byte_num == 0XF0) { + else if (char_byte_num == 0xF0) { //--4byte i += 4; //char_i += 3; diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h index 49ee420aae..a01081a7df 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h @@ -42,6 +42,8 @@ //#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation #define I2C_EEPROM #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#define I2C_SCL_PIN PB6 +#define I2C_SDA_PIN PB7 // // Release PB4 (Z_DIR_PIN) from JTAG NRST role diff --git a/platformio.ini b/platformio.ini index b35cd878d0..a63ee9f96a 100644 --- a/platformio.ini +++ b/platformio.ini @@ -53,6 +53,7 @@ default_src_filter = + - - + - - - - + - - - - - - - @@ -287,6 +288,10 @@ HAS_MENU_UBL = src_filter=+ ANYCUBIC_LCD_CHIRON = src_filter=+ + ANYCUBIC_LCD_I3MEGA = src_filter=+ + HAS_DGUS_LCD = src_filter=+ + +DGUS_LCD_UI_FYSETC = src_filter=+ +DGUS_LCD_UI_HIPRECY = src_filter=+ +DGUS_LCD_UI_MKS = src_filter=+ +DGUS_LCD_UI_ORIGIN = src_filter=+ TOUCH_UI_FTDI_EVE = src_filter=+ EXTUI_EXAMPLE = src_filter=+ MALYAN_LCD = src_filter=+