Cleanup pins spacing

Marlin/src/pins/pins.h

@@ -45,7 +45,7 @@
   #define IS_RAMPS_EFF
 #elif MB(RAMPS_13_EEF) || MB(RAMPS_14_EEF) || MB(RAMPS_14_RE_ARM_EEF) || MB(RAMPS_SMART_EEF) || MB(RAMPS_DUO_EEF) || MB(RAMPS4DUE_EEF)
   #define IS_RAMPS_EEF
-#elif MB(RAMPS_13_SF)  || MB(RAMPS_14_SF)  || MB(RAMPS_14_RE_ARM_SF)  || MB(RAMPS_SMART_SF)  || MB(RAMPS_DUO_SF)  || MB(RAMPS4DUE_SF) 
+#elif MB(RAMPS_13_SF)  || MB(RAMPS_14_SF)  || MB(RAMPS_14_RE_ARM_SF)  || MB(RAMPS_SMART_SF)  || MB(RAMPS_DUO_SF)  || MB(RAMPS4DUE_SF)
   #define IS_RAMPS_SF
 #endif
 

Marlin/src/pins/pinsDebug_list.h

@@ -358,7 +358,7 @@
 #endif
 #if PIN_EXISTS(FAN)
   REPORT_NAME_DIGITAL(FAN_PIN, __LINE__ )
-#endif 
+#endif
 #if PIN_EXISTS(FAN1)
   REPORT_NAME_DIGITAL(FAN1_PIN, __LINE__ )
 #endif

Marlin/src/pins/pins_DUE3DOM.h

@@ -123,7 +123,7 @@
 
     #define BTN_EN1         50
     #define BTN_EN2         52
-    #define BTN_ENC         48    
+    #define BTN_ENC         48
 
     #define SDSS             4
     #define SD_DETECT_PIN   14
@@ -135,9 +135,9 @@
     #define BTN_EN1         50
     #define BTN_EN2         52
     #define BTN_ENC         48
-      
+
     #define BTN_BACK        71
-    
+
     #undef SDSS
     #define SDSS             4
     #define SD_DETECT_PIN   14

Marlin/src/pins/pins_DUE3DOM_MINI.h

@@ -115,7 +115,7 @@
 
     #define BTN_EN1         50
     #define BTN_EN2         52
-    #define BTN_ENC         48    
+    #define BTN_ENC         48
 
     #define SDSS             4
     #define SD_DETECT_PIN   14
@@ -127,9 +127,9 @@
     #define BTN_EN1         50
     #define BTN_EN2         52
     #define BTN_ENC         48
-      
+
     #define BTN_BACK        71
-    
+
     #undef SDSS
     #define SDSS             4
     #define SD_DETECT_PIN   14

Marlin/src/pins/pins_RAMPS.h

@@ -46,8 +46,8 @@
 
 #if ENABLED(IS_REARM)
   #error "Oops!  use 'pins_RAMPS_RE_ARM.h' when Re-Arm is used."
-#endif 
- 
+#endif
+
 #if !ENABLED(IS_RAMPS_SMART) && !ENABLED(IS_RAMPS_DUO) && !ENABLED(IS_RAMPS4DUE) && !ENABLED(TARGET_LPC1768)
   #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
     #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."

Marlin/src/pins/pins_RAMPS_RE_ARM.h

@@ -248,12 +248,12 @@
   #define DOGLCD_CS           63  // J5-3 & AUX-2
 
 #ifdef ULTIPANEL
-  
+
   #define LCD_PINS_D5         71  // ENET_MDIO
   #define LCD_PINS_D6         73  // ENET_RX_ER
   #define LCD_PINS_D7         75  // ENET_RXD1
 #endif
- 
+
   #if ENABLED(NEWPANEL)
     #if ENABLED(REPRAPWORLD_KEYPAD)
       #define SHIFT_OUT         51  // (MOSI) J3-10 & AUX-3
@@ -287,12 +287,12 @@
 
  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
 //    #define LCD_SCREEN_ROT_180
-    
+
     #define SOFTWARE_SPI  // temp to see if it fixes the  "not found" error
-    
+
     #undef  BEEPER_PIN
     #define BEEPER_PIN          37  // may change if cable changes
-    
+
     #define BTN_EN1             31  // J3-2 & AUX-4
     #define BTN_EN2             33  // J3-4 & AUX-4
     #define BTN_ENC             35  // J3-3 & AUX-4
@@ -301,7 +301,7 @@
     #define KILL_PIN            41  // J5-4 & AUX-4
 
     #undef  DOGLCD_CS
-    #define DOGLCD_CS           16 
+    #define DOGLCD_CS           16
     #undef  LCD_BACKLIGHT_PIN   //16  // J3-7 & AUX-4 - only used on DOGLCD controllers
     #undef  LCD_PINS_ENABLE     //51  // (MOSI) J3-10 & AUX-3
     #undef  LCD_PINS_D4         //52  // (SCK)  J3-9 & AUX-3
@@ -310,9 +310,9 @@
     #define DOGLCD_A0           59  // J3-8 & AUX-2
     #undef  LCD_PINS_D6         //63  // J5-3 & AUX-2
     #undef  LCD_PINS_D7          //6  // (SERVO1) J5-1 & SERVO connector
-    #define DOGLCD_SCK SCK_PIN 
+    #define DOGLCD_SCK SCK_PIN
     #define DOGLCD_MOSI MOSI_PIN
- 
+
     #define STAT_LED_BLUE_PIN   63  // may change if cable changes
     #define STAT_LED_RED_PIN     6  // may change if cable changes
   #endif
@@ -320,8 +320,8 @@
   //#define MOSI_PIN            51  // system defined J3-10 & AUX-3
   //#define SCK_PIN             52  // system defined J3-9 & AUX-3
   //#define SS_PIN              53  // system defined J3-5 & AUX-3 - sometimes called SDSS
-  
-  
+
+
   #if ENABLED(MINIPANEL)
     // GLCD features
     //#define LCD_CONTRAST   190

Marlin/src/pins/pins_TEENSY35_36.h

@@ -2,7 +2,7 @@
 * Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments
 * Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE!
 * http://www.pjrc.com/teensy/teensyduino.html
-* 
+*
 ****************************************************************************************/
 #if MOTHERBOARD == 841 // BOARD_TEENSY35_36
 #define KNOWN_BOARD 1
@@ -21,7 +21,7 @@
 #define LARGE_FLASH        true
 #define USBCON //1286  // Disable MarlinSerial etc.
 
-/* 
+/*
 teemuatlut plan for Teensy3.5 and Teensy3.6:
 
                                                      USB
@@ -109,22 +109,22 @@ D8    HEATER_BED_PIN      CS1     RX4  A12 31 |   46 * * 47   | 34 A15 PWM
 #define SOL1_PIN           28
 
 #ifndef SDSUPPORT
-// these pins are defined in the SD library if building with SD support
+  // these are defined in the SD library if building with SD support
   #define SCK_PIN          13
   #define MISO_PIN         12
   #define MOSI_PIN         11
 #endif
 
 #ifdef ULTRA_LCD
-  #define LCD_PINS_RS        40
-  #define LCD_PINS_ENABLE    41
-  #define LCD_PINS_D4        42
-  #define LCD_PINS_D5        43
-  #define LCD_PINS_D6        44
-  #define LCD_PINS_D7        45
-  #define BTN_EN1            46
-  #define BTN_EN2            47
-  #define BTN_ENC            48
+  #define LCD_PINS_RS      40
+  #define LCD_PINS_ENABLE  41
+  #define LCD_PINS_D4      42
+  #define LCD_PINS_D5      43
+  #define LCD_PINS_D6      44
+  #define LCD_PINS_D7      45
+  #define BTN_EN1          46
+  #define BTN_EN2          47
+  #define BTN_ENC          48
 #endif
 
 #endif  // MOTHERBOARD == 841 (Teensy3.5 and Teensy3.6)