From be83036212cfc8e84611b403ca8295e0939c9b67 Mon Sep 17 00:00:00 2001 From: jbrazio Date: Sat, 27 Feb 2016 23:40:26 +0000 Subject: [PATCH] Applying suggestions by @thinkyhead at MarlinFirmware/Marlin#3049. - Remove the forced activation of SDSUPPORT, I guess people may use the ZUM 3D board and not the LCD module. - Fixed the tab issue within boards.h file. --- Marlin/Conditionals.h | 1 - Marlin/boards.h | 2 +- Marlin/example_configurations/Hephestos_2/Configuration.h | 2 +- 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index 0abef311a4..7ff5432503 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -51,7 +51,6 @@ #if ENABLED(BQ_LCD_SMART_CONTROLLER) #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - #define SDSUPPORT #ifndef ENCODER_PULSES_PER_STEP #define ENCODER_PULSES_PER_STEP 4 diff --git a/Marlin/boards.h b/Marlin/boards.h index f4a30a57e1..0d61a77693 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -61,7 +61,7 @@ #define BOARD_MKS_BASE 40 // MKS BASE 1.0 #define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers #define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers -#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D +#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D #define BOARD_99 99 // This is in pins.h but...? diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index dadbd09956..9ef8de5c97 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -666,7 +666,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l //#define ULTRA_LCD //general LCD support, also 16x2 //#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) -//#define SDSUPPORT // Enable SD Card Support in Hardware Console +#define SDSUPPORT // Enable SD Card Support in Hardware Console // Changed behaviour! If you need SDSUPPORT uncomment it! //#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error) //#define SDEXTRASLOW // Use even slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)