diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index c650d7ec75..132699b2d4 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -298,6 +298,8 @@
#define BOARD_GTM32_MINI 4021 // STM32F103VET6 controller
#define BOARD_GTM32_MINI_A30 4022 // STM32F103VET6 controller
#define BOARD_GTM32_REV_B 4023 // STM32F103VET6 controller
+#define BOARD_MKS_ROBIN_E3D 4024 // MKS Robin E3D(STM32F103RCT6)
+#define BOARD_MKS_ROBIN_E3 4025 // MKS Robin E3(STM32F103RCT6)
//
// ARM Cortex-M4F
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index a1095e23e2..9b32d73851 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -516,6 +516,10 @@
#include "stm32f1/pins_MKS_ROBIN_LITE3.h" // STM32F1 env:mks_robin_lite3
#elif MB(MKS_ROBIN_PRO)
#include "stm32f1/pins_MKS_ROBIN_PRO.h" // STM32F1 env:mks_robin_pro
+#elif MB(MKS_ROBIN_E3D)
+ #include "stm32f1/pins_MKS_ROBIN_E3D.h" // STM32F1 env:mks_robin_e3
+#elif MB(MKS_ROBIN_E3)
+ #include "stm32f1/pins_MKS_ROBIN_E3.h" // STM32F1 env:mks_robin_e3
//
// ARM Cortex-M4F
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h
new file mode 100644
index 0000000000..34c265c47b
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h
@@ -0,0 +1,178 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * MKS Robin E3D (STM32F103RCT6) board pin assignments
+ */
+
+#ifndef __STM32F1__
+ #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#elif HOTENDS > 1 || E_STEPPERS > 1
+ #error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#ifndef BOARD_INFO_NAME
+ #define BOARD_INFO_NAME "MKS Robin E3D"
+#endif
+#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
+
+//#define DISABLE_DEBUG
+#define DISABLE_JTAG
+#define ENABLE_SPI2
+
+//
+// Servos
+//
+#define SERVO0_PIN PA3
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN PA12
+#define Y_STOP_PIN PA11
+#define Z_MIN_PIN PC6
+#define Z_MAX_PIN PB1
+
+//
+// Steppers
+//
+#define X_STEP_PIN PC0
+#define X_DIR_PIN PB2
+#define X_ENABLE_PIN PC13
+
+#define Y_STEP_PIN PC2
+#define Y_DIR_PIN PB9
+#define Y_ENABLE_PIN PB12
+
+#define Z_STEP_PIN PB7
+#define Z_DIR_PIN PB6
+#define Z_ENABLE_PIN PB8
+
+#define E0_STEP_PIN PB4
+#define E0_DIR_PIN PB3
+#define E0_ENABLE_PIN PB5
+
+#if HAS_TMC220x
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+
+ //
+ // Software serial
+ //
+ #define X_SERIAL_TX_PIN PC7
+ #define X_SERIAL_RX_PIN PC7
+
+ #define Y_SERIAL_TX_PIN PD2
+ #define Y_SERIAL_RX_PIN PD2
+
+ #define Z_SERIAL_TX_PIN PC12
+ #define Z_SERIAL_RX_PIN PC12
+
+ #define E0_SERIAL_TX_PIN PC11
+ #define E0_SERIAL_RX_PIN PC11
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+//
+// Heaters 0,1 / Fans / Bed
+//
+#define HEATER_0_PIN PC9
+#define FAN_PIN PA8
+#define HEATER_BED_PIN PC8
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN PA1 //TB
+#define TEMP_0_PIN PA0 //TH1
+
+#define FIL_RUNOUT_PIN PB10 // MT_DET
+
+//
+// LCD Pins
+//
+#if HAS_SPI_LCD
+
+ #define BEEPER_PIN PC1
+ #define BTN_ENC PC3
+ #define LCD_PINS_ENABLE PA4
+ #define LCD_PINS_RS PA5
+ #define BTN_EN1 PB11
+ #define BTN_EN2 PB0
+
+ // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
+ #if ENABLED(MKS_MINI_12864)
+
+ #define LCD_BACKLIGHT_PIN -1
+ #define LCD_RESET_PIN -1
+ #define DOGLCD_A0 PC4
+ #define DOGLCD_CS PA7
+ #define DOGLCD_SCK PB13
+ #define DOGLCD_MOSI PB15
+
+ // Required for MKS_MINI_12864 with this board
+ #define MKS_LCD12864B
+ #undef SHOW_BOOTSCREEN
+
+ #else // !MKS_MINI_12864
+
+ #define LCD_PINS_D4 PA6
+ #if ENABLED(ULTIPANEL)
+ #define LCD_PINS_D5 PA7
+ #define LCD_PINS_D6 PC4
+ #define LCD_PINS_D7 PC5
+ #endif
+
+ #endif // !MKS_MINI_12864
+
+#endif // HAS_SPI_LCD
+
+//
+// SD Card
+//
+#define ENABLE_SPI2
+#define SD_DETECT_PIN PC10
+#define SCK_PIN PB13
+#define MISO_PIN PB14
+#define MOSI_PIN PB15
+#define SS_PIN PA15
+
+#ifndef ST7920_DELAY_1
+ #define ST7920_DELAY_1 DELAY_NS(125)
+#endif
+#ifndef ST7920_DELAY_2
+ #define ST7920_DELAY_2 DELAY_NS(125)
+#endif
+#ifndef ST7920_DELAY_3
+ #define ST7920_DELAY_3 DELAY_NS(125)
+#endif
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h
new file mode 100644
index 0000000000..9091c99dfc
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h
@@ -0,0 +1,205 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * MKS Robin E3D (STM32F103RCT6) board pin assignments
+ */
+
+#ifndef __STM32F1__
+ #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#elif HOTENDS > 1 || E_STEPPERS > 1
+ #error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#ifndef BOARD_INFO_NAME
+ #define BOARD_INFO_NAME "MKS Robin E3D"
+#endif
+#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
+
+//#define DISABLE_DEBUG
+#define DISABLE_JTAG
+#define ENABLE_SPI2
+
+//
+// Servos
+//
+#define SERVO0_PIN PA3
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN PA12
+#define Y_STOP_PIN PA11
+#define Z_MIN_PIN PC6
+#define Z_MAX_PIN PB1
+
+//
+// Steppers
+//
+#define X_STEP_PIN PC0
+#define X_DIR_PIN PB2
+#define X_ENABLE_PIN PC13
+#ifndef X_CS_PIN
+ #define X_CS_PIN PC7
+#endif
+
+#define Y_STEP_PIN PC2
+#define Y_DIR_PIN PB9
+#define Y_ENABLE_PIN PB12
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN PD2
+#endif
+
+#define Z_STEP_PIN PB7
+#define Z_DIR_PIN PB6
+#define Z_ENABLE_PIN PB8
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN PC12
+#endif
+
+#define E0_STEP_PIN PB4
+#define E0_DIR_PIN PB3
+#define E0_ENABLE_PIN PB5
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN PC11
+#endif
+
+//
+// Software SPI pins for TMC2130 stepper drivers
+//
+#if ENABLED(TMC_USE_SW_SPI)
+ #ifndef TMC_SW_MOSI
+ #define TMC_SW_MOSI PB15
+ #endif
+ #ifndef TMC_SW_MISO
+ #define TMC_SW_MISO PB14
+ #endif
+ #ifndef TMC_SW_SCK
+ #define TMC_SW_SCK PB13
+ #endif
+#endif
+
+#if HAS_TMC220x
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+
+ //
+ // Software serial
+ //
+ #define X_SERIAL_TX_PIN PC7
+ #define X_SERIAL_RX_PIN PC7
+
+ #define Y_SERIAL_TX_PIN PD2
+ #define Y_SERIAL_RX_PIN PD2
+
+ #define Z_SERIAL_TX_PIN PC12
+ #define Z_SERIAL_RX_PIN PC12
+
+ #define E0_SERIAL_TX_PIN PC11
+ #define E0_SERIAL_RX_PIN PC11
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+//
+// Heaters 0,1 / Fans / Bed
+//
+#define HEATER_0_PIN PC9
+#define FAN_PIN PA8
+#define HEATER_BED_PIN PC8
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN PA1 //TB
+#define TEMP_0_PIN PA0 //TH1
+
+#define FIL_RUNOUT_PIN PB10 // MT_DET
+
+//
+// LCD Pins
+//
+#if HAS_SPI_LCD
+
+ #define BEEPER_PIN PC1
+ #define BTN_ENC PC3
+ #define LCD_PINS_ENABLE PA4
+ #define LCD_PINS_RS PA5
+ #define BTN_EN1 PB11
+ #define BTN_EN2 PB0
+
+ // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
+ #if ENABLED(MKS_MINI_12864)
+
+ #define LCD_BACKLIGHT_PIN -1
+ #define LCD_RESET_PIN -1
+ #define DOGLCD_A0 PC4
+ #define DOGLCD_CS PA7
+ #define DOGLCD_SCK PB13
+ #define DOGLCD_MOSI PB15
+
+ // Required for MKS_MINI_12864 with this board
+ #define MKS_LCD12864B
+ #undef SHOW_BOOTSCREEN
+
+ #else // !MKS_MINI_12864
+
+ #define LCD_PINS_D4 PA6
+ #if ENABLED(ULTIPANEL)
+ #define LCD_PINS_D5 PA7
+ #define LCD_PINS_D6 PC4
+ #define LCD_PINS_D7 PC5
+ #endif
+
+ #endif // !MKS_MINI_12864
+
+#endif // HAS_SPI_LCD
+
+//
+// SD Card
+//
+#define ENABLE_SPI2
+#define SD_DETECT_PIN PC10
+#define SCK_PIN PB13
+#define MISO_PIN PB14
+#define MOSI_PIN PB15
+#define SS_PIN PA15
+
+#ifndef ST7920_DELAY_1
+ #define ST7920_DELAY_1 DELAY_NS(125)
+#endif
+#ifndef ST7920_DELAY_2
+ #define ST7920_DELAY_2 DELAY_NS(125)
+#endif
+#ifndef ST7920_DELAY_3
+ #define ST7920_DELAY_3 DELAY_NS(125)
+#endif
diff --git a/buildroot/share/PlatformIO/ldscripts/mks_robin_e3.ld b/buildroot/share/PlatformIO/ldscripts/mks_robin_e3.ld
new file mode 100644
index 0000000000..13fa48add4
--- /dev/null
+++ b/buildroot/share/PlatformIO/ldscripts/mks_robin_e3.ld
@@ -0,0 +1,14 @@
+MEMORY
+{
+ ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
+ rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K
+}
+
+/* Provide memory region aliases for common.inc */
+REGION_ALIAS("REGION_TEXT", rom);
+REGION_ALIAS("REGION_DATA", ram);
+REGION_ALIAS("REGION_BSS", ram);
+REGION_ALIAS("REGION_RODATA", rom);
+
+/* Let common.inc handle the real work. */
+INCLUDE common.inc
diff --git a/buildroot/share/PlatformIO/scripts/mks_robin_e3.py b/buildroot/share/PlatformIO/scripts/mks_robin_e3.py
new file mode 100644
index 0000000000..3af623cce0
--- /dev/null
+++ b/buildroot/share/PlatformIO/scripts/mks_robin_e3.py
@@ -0,0 +1,40 @@
+import os
+Import("env")
+
+# Relocate firmware from 0x08000000 to 0x08005000
+for define in env['CPPDEFINES']:
+ if define[0] == "VECT_TAB_ADDR":
+ env['CPPDEFINES'].remove(define)
+env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08005000"))
+
+custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/mks_robin_e3.ld")
+for i, flag in enumerate(env["LINKFLAGS"]):
+ if "-Wl,-T" in flag:
+ env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script
+ elif flag == "-T":
+ env["LINKFLAGS"][i + 1] = custom_ld_script
+
+
+# Encrypt ${PROGNAME}.bin and save it as 'mksLite.bin'
+def encrypt(source, target, env):
+ import sys
+
+ key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E]
+
+ firmware = open(target[0].path, "rb")
+ robin = open(target[0].dir.path +'/Robin_e3.bin', "wb")
+ length = os.path.getsize(target[0].path)
+ position = 0
+ try:
+ while position < length:
+ byte = firmware.read(1)
+ if position >= 320 and position < 31040:
+ byte = chr(ord(byte) ^ key[position & 31])
+ if sys.version_info[0] > 2:
+ byte = bytes(byte, 'latin1')
+ robin.write(byte)
+ position += 1
+ finally:
+ firmware.close()
+ robin.close()
+env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
diff --git a/platformio.ini b/platformio.ini
index 38e3065f20..63df14cf63 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -543,6 +543,23 @@ src_filter = ${common.default_src_filter} +
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI, TMCStepper
+#
+# MKS Robin E3D (STM32F103RCT6) and
+# MKS Robin E3 with TMC2209
+#
+[env:mks_robin_e3]
+platform = ststm32
+board = genericSTM32F103RC
+platform_packages = tool-stm32duino
+build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
+ ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4
+build_unflags = -std=gnu++11
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_e3.py
+src_filter = ${common.default_src_filter} +
+lib_deps = ${common.lib_deps}
+ SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore = Adafruit NeoPixel, SPI
+
#
# MKS Robin Lite/Lite2 (STM32F103RCT6)
#