melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Followup to #15481

Browse Source
2.0.x
Scott Lahteine 5 years ago
parent af80653f3f
commit b4d48fdc91
2 changed files with 116 additions and 125 deletions
Show Stats Download Patch File Download Diff File

203
Marlin/Configuration.h
Unescape Escape View File

@ -54,46 +54,19 @@
* http://www.thingiverse.com/thing:298812 * http://www.thingiverse.com/thing:298812
*/ */
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer start with one of the configuration files in the
// config/examples/delta directory and customize for your machine.
//
//=========================================================================== //===========================================================================
//============================= SCARA Printer =============================== //============================= SCARA Printer ===============================
//=========================================================================== //===========================================================================
// For a SCARA printer start with the configuration files in
/** // config/examples/SCARA and customize for your machine.
* MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013. //
* Implemented and slightly reworked by JCERNY in June, 2014.
*/
// Specify the specific SCARA model
#define MORGAN_SCARA
#if ENABLED(MORGAN_SCARA)
//#define DEBUG_SCARA_KINEMATICS
#define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
// If movement is choppy try lowering this value
#define SCARA_SEGMENTS_PER_SECOND 200
// Length of inner and outer support arms. Measure arm lengths precisely.
#define SCARA_LINKAGE_1 150 //mm
#define SCARA_LINKAGE_2 150 //mm
// SCARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space.
#define SCARA_OFFSET_X 100 //mm
#define SCARA_OFFSET_Y -56 //mm
// Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 //mm
#define THETA_HOMING_OFFSET 0 //calculatated from Calibration Guide and command M360 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073
#define PSI_HOMING_OFFSET 0 //calculatated from Calibration Guide and command M364 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073
#endif
//===========================================================================
//==================== END ==== SCARA Printer ==== END ======================
//===========================================================================
// @section info // @section info
@ -160,7 +133,7 @@
#endif #endif
// Name displayed in the LCD "Ready" message and Info menu // Name displayed in the LCD "Ready" message and Info menu
#define CUSTOM_MACHINE_NAME "SCARA" //#define CUSTOM_MACHINE_NAME "3D Printer"
// Printer's unique ID, used by some programs to differentiate between machines. // Printer's unique ID, used by some programs to differentiate between machines.
// Choose your own or use a service like http://www.uuidgenerator.net/version4 // Choose your own or use a service like http://www.uuidgenerator.net/version4
@ -347,7 +320,7 @@
* Enable and connect the power supply to the PS_ON_PIN. * Enable and connect the power supply to the PS_ON_PIN.
* Specify whether the power supply is active HIGH or active LOW. * Specify whether the power supply is active HIGH or active LOW.
*/ */
#define PSU_CONTROL //#define PSU_CONTROL
//#define PSU_NAME "Power Supply" //#define PSU_NAME "Power Supply"
#if ENABLED(PSU_CONTROL) #if ENABLED(PSU_CONTROL)
@ -436,7 +409,7 @@
#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_3 0
#define TEMP_SENSOR_4 0 #define TEMP_SENSOR_4 0
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
@ -448,11 +421,11 @@
//#define TEMP_SENSOR_1_AS_REDUNDANT //#define TEMP_SENSOR_1_AS_REDUNDANT
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
#define TEMP_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
@ -495,13 +468,25 @@
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2] // Set/get with gcode: M301 E[extruder number, 0-2]
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Merlin Hotend: From Autotune // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
#define DEFAULT_Kp 24.5
#define DEFAULT_Ki 1.72 // Ultimaker
#define DEFAULT_Kd 87.73 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114
// MakerGear
//#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -522,7 +507,7 @@
* heater. If your configuration is significantly different than this and you don't understand * heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/ */
#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
@ -538,11 +523,17 @@
//#define MIN_BED_POWER 0 //#define MIN_BED_POWER 0
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//12v Heatbed Mk3 12V in parallel //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
#define DEFAULT_bedKp 630.14 //#define DEFAULT_bedKp 97.1
#define DEFAULT_bedKi 121.71 //#define DEFAULT_bedKi 1.41
#define DEFAULT_bedKd 815.64 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED
@ -611,23 +602,23 @@
// Specify here all the endstop connectors that are connected to any endstop or probe. // Specify here all the endstop connectors that are connected to any endstop or probe.
// Almost all printers will be using one per axis. Probes will use one or more of the // Almost all printers will be using one per axis. Probes will use one or more of the
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
//#define USE_XMIN_PLUG #define USE_XMIN_PLUG
//#define USE_YMIN_PLUG #define USE_YMIN_PLUG
#define USE_ZMIN_PLUG #define USE_ZMIN_PLUG
#define USE_XMAX_PLUG //#define USE_XMAX_PLUG
#define USE_YMAX_PLUG //#define USE_YMAX_PLUG
//#define USE_ZMAX_PLUG //#define USE_ZMAX_PLUG
// Enable pullup for all endstops to prevent a floating state // Enable pullup for all endstops to prevent a floating state
//#define ENDSTOPPULLUPS #define ENDSTOPPULLUPS
#if DISABLED(ENDSTOPPULLUPS) #if DISABLED(ENDSTOPPULLUPS)
// Disable ENDSTOPPULLUPS to set pullups individually // Disable ENDSTOPPULLUPS to set pullups individually
#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_XMAX
#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_YMAX
//#define ENDSTOPPULLUP_ZMAX // open pin, inverted //#define ENDSTOPPULLUP_ZMAX
//#define ENDSTOPPULLUP_XMIN // open pin, inverted //#define ENDSTOPPULLUP_XMIN
//#define ENDSTOPPULLUP_YMIN // open pin, inverted //#define ENDSTOPPULLUP_YMIN
#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN
//#define ENDSTOPPULLUP_ZMIN_PROBE //#define ENDSTOPPULLUP_ZMIN_PROBE
#endif #endif
@ -645,13 +636,13 @@
#endif #endif
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define X_MAX_ENDSTOP_INVERTING false #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
/** /**
* Stepper Drivers * Stepper Drivers
@ -668,14 +659,14 @@
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
*/ */
#define X_DRIVER_TYPE TMC2209 //#define X_DRIVER_TYPE A4988
#define Y_DRIVER_TYPE TMC2130 //#define Y_DRIVER_TYPE A4988
#define Z_DRIVER_TYPE TMC2130 //#define Z_DRIVER_TYPE A4988
//#define X2_DRIVER_TYPE A4988 //#define X2_DRIVER_TYPE A4988
//#define Y2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988
//#define Z2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988
//#define Z3_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE TMC2660 //#define E0_DRIVER_TYPE A4988
//#define E1_DRIVER_TYPE A4988 //#define E1_DRIVER_TYPE A4988
//#define E2_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988
@ -725,14 +716,14 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING) #if ENABLED(LIMITED_MAX_FR_EDITING)
@ -745,7 +736,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING) #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@ -760,9 +751,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)
@ -772,10 +763,10 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define CLASSIC_JERK //#define CLASSIC_JERK
#if ENABLED(CLASSIC_JERK) #if ENABLED(CLASSIC_JERK)
#define DEFAULT_XJERK 5.0 #define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 5.0 #define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.3 #define DEFAULT_ZJERK 0.3
//#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
@ -784,7 +775,7 @@
#endif #endif
#endif #endif
#define DEFAULT_EJERK 3.0 // May be used by Linear Advance #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/** /**
* Junction Deviation Factor * Junction Deviation Factor
@ -860,7 +851,7 @@
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
* (e.g., an inductive probe or a nozzle-based probe-switch.) * (e.g., an inductive probe or a nozzle-based probe-switch.)
*/ */
#define FIX_MOUNTED_PROBE //#define FIX_MOUNTED_PROBE
/** /**
* Z Servo Probe, such as an endstop switch on a rotating arm. * Z Servo Probe, such as an endstop switch on a rotating arm.
@ -928,7 +919,7 @@
* *
* Specify a Probe position as { X, Y, Z } * Specify a Probe position as { X, Y, Z }
*/ */
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
// Certain types of probes need to stay away from edges // Certain types of probes need to stay away from edges
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
@ -968,7 +959,7 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done //#define Z_AFTER_PROBING 5 // Z position after probing is done
@ -983,7 +974,7 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif #endif
@ -1028,8 +1019,8 @@
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false #define INVERT_X_DIR false
#define INVERT_Y_DIR false #define INVERT_Y_DIR true
#define INVERT_Z_DIR true #define INVERT_Z_DIR false
// @section extruder // @section extruder
@ -1052,8 +1043,8 @@
// Direction of endstops when homing; 1=MAX, -1=MIN // Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1] // :[-1,1]
#define X_HOME_DIR 1 #define X_HOME_DIR -1
#define Y_HOME_DIR 1 #define Y_HOME_DIR -1
#define Z_HOME_DIR -1 #define Z_HOME_DIR -1
// @section machine // @section machine
@ -1065,10 +1056,10 @@
// Travel limits (mm) after homing, corresponding to endstop positions. // Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS 0
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS MANUAL_Z_HOME_POS #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 225 #define Z_MAX_POS 200
/** /**
* Software Endstops * Software Endstops
@ -1171,7 +1162,7 @@
*/ */
//#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_LINEAR
#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
@ -1309,9 +1300,9 @@
// Manually set the home position. Leave these undefined for automatic settings. // Manually set the home position. Leave these undefined for automatic settings.
// For DELTA this is the top-center of the Cartesian print volume. // For DELTA this is the top-center of the Cartesian print volume.
#define MANUAL_X_HOME_POS -22 //#define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS -52 //#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 0.1 //#define MANUAL_Z_HOME_POS 0
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
// //
@ -1330,8 +1321,8 @@
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (40*60) #define HOMING_FEEDRATE_XY (50*60)
#define HOMING_FEEDRATE_Z (10*60) #define HOMING_FEEDRATE_Z (4*60)
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS #define VALIDATE_HOMING_ENDSTOPS
@ -1408,7 +1399,7 @@
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
*/ */
#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1446,12 +1437,12 @@
#define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_LABEL "PLA"
#define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_BED 70
#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_LABEL "ABS"
#define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_HOTEND 240
#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_BED 110
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
/** /**
* Nozzle Park * Nozzle Park
@ -1747,7 +1738,7 @@
// //
// ULTIMAKER Controller. // ULTIMAKER Controller.
// //
#define ULTIMAKERCONTROLLER //#define ULTIMAKERCONTROLLER
// //
// ULTIPANEL as seen on Thingiverse. // ULTIPANEL as seen on Thingiverse.

34
Marlin/Configuration_adv.h
Unescape Escape View File

@ -114,7 +114,7 @@
#endif #endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 3000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
#define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
#endif #endif
@ -215,7 +215,7 @@
#endif #endif
// Show extra position information with 'M114 D' // Show extra position information with 'M114 D'
#define M114_DETAIL //#define M114_DETAIL
// Show Temperature ADC value // Show Temperature ADC value
// Enable for M105 to include ADC values read from temperature sensors. // Enable for M105 to include ADC values read from temperature sensors.
@ -257,7 +257,7 @@
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 180 // (mm/m) #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
#define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
#endif #endif
@ -516,9 +516,9 @@
// @section homing // @section homing
// Homing hits each endstop, retracts by these distances, then does a slower bump. // Homing hits each endstop, retracts by these distances, then does a slower bump.
#define X_HOME_BUMP_MM 3 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 3 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 3 #define Z_HOME_BUMP_MM 2
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially //#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing //#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing
@ -635,7 +635,7 @@
// Default stepper release if idle. Set to 0 to deactivate. // Default stepper release if idle. Set to 0 to deactivate.
// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
// Time can be set by M18 and M84. // Time can be set by M18 and M84.
#define DEFAULT_STEPPER_DEACTIVE_TIME 240 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished.
@ -650,7 +650,7 @@
#define DEFAULT_MINSEGMENTTIME 20000 // (ms) #define DEFAULT_MINSEGMENTTIME 20000 // (ms)
// If defined the movements slow down when the look ahead buffer is only half full // If defined the movements slow down when the look ahead buffer is only half full
//#define SLOWDOWN #define SLOWDOWN
// Frequency limit // Frequency limit
// See nophead's blog for more info // See nophead's blog for more info
@ -824,7 +824,7 @@
// @section lcd // @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI) #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
@ -919,7 +919,7 @@
//#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
//#define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27")
/** /**
* Continue after Power-Loss (Creality3D) * Continue after Power-Loss (Creality3D)
@ -1587,7 +1587,7 @@
#endif #endif
#define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value)
#define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value)
#define RETRACT_FEEDRATE 35 // (mm/s) Default feedrate for retracting #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting
#define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise
#define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover)
#define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange)
@ -1983,7 +1983,7 @@
* M912 - Clear stepper driver overtemperature pre-warn condition flag. * M912 - Clear stepper driver overtemperature pre-warn condition flag.
* M122 - Report driver parameters (Requires TMC_DEBUG) * M122 - Report driver parameters (Requires TMC_DEBUG)
*/ */
#define MONITOR_DRIVER_STATUS //#define MONITOR_DRIVER_STATUS
#if ENABLED(MONITOR_DRIVER_STATUS) #if ENABLED(MONITOR_DRIVER_STATUS)
#define CURRENT_STEP_DOWN 50 // [mA] #define CURRENT_STEP_DOWN 50 // [mA]
@ -1998,7 +1998,7 @@
* STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
* M913 X/Y/Z/E to live tune the setting * M913 X/Y/Z/E to live tune the setting
*/ */
#define HYBRID_THRESHOLD //#define HYBRID_THRESHOLD
#define X_HYBRID_THRESHOLD 100 // [mm/s] #define X_HYBRID_THRESHOLD 100 // [mm/s]
#define X2_HYBRID_THRESHOLD 100 #define X2_HYBRID_THRESHOLD 100
@ -2037,7 +2037,7 @@
* IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
* homing and adds a guard period for endstop triggering. * homing and adds a guard period for endstop triggering.
*/ */
#define SENSORLESS_HOMING // StallGuard capable drivers only //#define SENSORLESS_HOMING // StallGuard capable drivers only
/** /**
* Use StallGuard2 to probe the bed with the nozzle. * Use StallGuard2 to probe the bed with the nozzle.
@ -2061,7 +2061,7 @@
* Beta feature! * Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers. * Create a 50/50 square wave step pulse optimal for stepper drivers.
*/ */
#define SQUARE_WAVE_STEPPING //#define SQUARE_WAVE_STEPPING
/** /**
* Enable M122 debugging command for TMC stepper drivers. * Enable M122 debugging command for TMC stepper drivers.
@ -2511,8 +2511,8 @@
#define USER_DESC_4 "Heat Bed/Home/Level" #define USER_DESC_4 "Heat Bed/Home/Level"
#define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
//#define USER_DESC_5 "Home & Info" #define USER_DESC_5 "Home & Info"
//#define USER_GCODE_5 "G28\nM503" #define USER_GCODE_5 "G28\nM503"
#endif #endif
/** /**

Write Preview
Loading…
Cancel
Save