diff --git a/Marlin/G26_Mesh_Validation_Tool.cpp b/Marlin/G26_Mesh_Validation_Tool.cpp index f7402667c1..4195018978 100644 --- a/Marlin/G26_Mesh_Validation_Tool.cpp +++ b/Marlin/G26_Mesh_Validation_Tool.cpp @@ -199,6 +199,7 @@ set_current_to_destination(); } + ubl_has_control_of_lcd_panel = true; // Take control of the LCD Panel! if (turn_on_heaters()) // Turn on the heaters, leave the command if anything goto LEAVE; // has gone wrong. @@ -233,19 +234,30 @@ move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], 0.0); move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], ooze_amount); - ubl_has_control_of_lcd_panel++; // Take control of the LCD Panel! + ubl_has_control_of_lcd_panel = true; // Take control of the LCD Panel! debug_current_and_destination((char*)"Starting G26 Mesh Validation Pattern."); - wait_for_user = true; + /** + * Declare and generate a sin() & cos() table to be used during the circle drawing. This will lighten + * the CPU load and make the arc drawing faster and more smooth + */ + float sin_table[360 / 30 + 1], cos_table[360 / 30 + 1]; + for (i = 0; i <= 360 / 30; i++) { + cos_table[i] = SIZE_OF_INTERSECTION_CIRCLES * cos(RADIANS(valid_trig_angle(i * 30.0))); + sin_table[i] = SIZE_OF_INTERSECTION_CIRCLES * sin(RADIANS(valid_trig_angle(i * 30.0))); + } do { - if (!wait_for_user) { // Check if the user wants to stop the Mesh Validation + if (ubl_lcd_clicked()) { // Check if the user wants to stop the Mesh Validation strcpy(lcd_status_message, "Mesh Validation Stopped."); // We can't do lcd_setstatus() without having it continue; #if ENABLED(ULTRA_LCD) lcd_setstatus("Mesh Validation Stopped.", true); lcd_quick_feedback(); #endif + while (ubl_lcd_clicked()) { // Wait until the user is done pressing the + idle(); // Encoder Wheel if that is why we are leaving + } goto LEAVE; } @@ -309,16 +321,6 @@ end_angle = 360.0; } - /** - * Declare and generate a sin() & cos() table to be used during the circle drawing. This will lighten - * the CPU load and make the arc drawing faster and more smooth - */ - float sin_table[360 / 30 + 1], cos_table[360 / 30 + 1]; - for (i = 0; i <= 360 / 30; i++) { - cos_table[i] = SIZE_OF_INTERSECTION_CIRCLES * cos(RADIANS(valid_trig_angle(i * 30.0))); - sin_table[i] = SIZE_OF_INTERSECTION_CIRCLES * sin(RADIANS(valid_trig_angle(i * 30.0))); - } - for (tmp = start_angle; tmp < end_angle - 0.1; tmp += 30.0) { int tmp_div_30 = tmp / 30.0; if (tmp_div_30 < 0) tmp_div_30 += 360 / 30; @@ -351,13 +353,16 @@ } print_line_from_here_to_there(x, y, layer_height, xe, ye, layer_height); - } - lcd_init_counter++; - if (lcd_init_counter > 10) { - lcd_init_counter = 0; - lcd_init(); // Some people's LCD Displays are locking up. This might help them - } + } +// lcd_init_counter++; +// if (lcd_init_counter > 10) { +// lcd_init_counter = 0; +// lcd_init(); // Some people's LCD Displays are locking up. This might help them +// ubl_has_control_of_lcd_panel = true; // Make sure UBL still is controlling the LCD Panel +// } + + // If the end point of the line is closer to the nozzle, we are going to debug_current_and_destination((char*)"Looking for lines to connect."); look_for_lines_to_connect(); debug_current_and_destination((char*)"Done with line connect."); @@ -365,21 +370,24 @@ debug_current_and_destination((char*)"Done with current circle."); + // If the end point of the line is closer to the nozzle, we are going to + } while (location.x_index >= 0 && location.y_index >= 0); LEAVE: - wait_for_user = false; - + while (ubl_lcd_clicked()) { // Wait until the user is done pressing the + idle(); // Encoder Wheel if that is why we are leaving + } retract_filament(); destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Raise the nozzle debug_current_and_destination((char*)"ready to do Z-Raise."); - move_to( destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], 0); // Raise the nozzle + move_to( destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], 0); // Raise the nozzle debug_current_and_destination((char*)"done doing Z-Raise."); - destination[X_AXIS] = x_pos; // Move back to the starting position + destination[X_AXIS] = x_pos; // Move back to the starting position destination[Y_AXIS] = y_pos; destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Keep the nozzle where it is @@ -538,6 +546,8 @@ float feed_value; static float last_z = -999.99; + + bool has_xy_component = (x != current_position[X_AXIS] || y != current_position[Y_AXIS]); // Check if X or Y is involved in the movement. if (g26_debug_flag) { @@ -591,6 +601,7 @@ stepper.synchronize(); set_destination_to_current(); + } void retract_filament() { @@ -658,16 +669,23 @@ if (g26_debug_flag) SERIAL_ECHOLNPGM(" filament retracted."); } + // If the end point of the line is closer to the nozzle, we are going to move_to(sx, sy, sz, 0.0); // Get to the starting point with no extrusion + // If the end point of the line is closer to the nozzle, we are going to + float e_pos_delta = Line_Length * g26_e_axis_feedrate * extrusion_multiplier; un_retract_filament(); + + // If the end point of the line is closer to the nozzle, we are going to if (g26_debug_flag) { SERIAL_ECHOLNPGM(" doing printing move."); debug_current_and_destination((char*)"doing final move_to() inside print_line_from_here_to_there()"); } move_to(ex, ey, ez, e_pos_delta); // Get to the ending point with an appropriate amount of extrusion + + // If the end point of the line is closer to the nozzle, we are going to } /** @@ -815,18 +833,18 @@ lcd_setstatus("G26 Heating Bed.", true); lcd_quick_feedback(); #endif - ubl_has_control_of_lcd_panel++; + ubl_has_control_of_lcd_panel = true; thermalManager.setTargetBed(bed_temp); - wait_for_user = true; while (abs(thermalManager.degBed() - bed_temp) > 3) { - if (!wait_for_user) { + if (ubl_lcd_clicked()) { strcpy(lcd_status_message, "Leaving G26"); // We can't do lcd_setstatus() without having it continue; lcd_setstatus("Leaving G26", true); // Now we do it right. + while (ubl_lcd_clicked()) // Debounce Encoder Wheel + idle(); return UBL_ERR; } idle(); } - wait_for_user = false; #if ENABLED(ULTRA_LCD) } lcd_setstatus("G26 Heating Nozzle.", true); @@ -836,16 +854,16 @@ // Start heating the nozzle and wait for it to reach temperature. thermalManager.setTargetHotend(hotend_temp, 0); - wait_for_user = true; while (abs(thermalManager.degHotend(0) - hotend_temp) > 3) { - if (!wait_for_user) { + if (ubl_lcd_clicked()) { strcpy(lcd_status_message, "Leaving G26"); // We can't do lcd_setstatus() without having it continue; lcd_setstatus("Leaving G26", true); // Now we do it right. + while (ubl_lcd_clicked()) // Debounce Encoder Wheel + idle(); return UBL_ERR; } idle(); } - wait_for_user = false; #if ENABLED(ULTRA_LCD) lcd_setstatus("", true); @@ -869,9 +887,7 @@ un_retract_filament(); // Lets make sure the G26 command doesn't think the filament is // retracted(). We are here because we want to prime the nozzle. // So let's just unretract just to be sure. - - wait_for_user = true; - while (wait_for_user) { + while (!ubl_lcd_clicked()) { chirp_at_user(); destination[E_AXIS] += 0.25; #ifdef PREVENT_LENGTHY_EXTRUDE @@ -894,9 +910,10 @@ strcpy(lcd_status_message, "Done Priming"); // We can't do lcd_setstatus() without having it continue; // So... We cheat to get a message up. + while (ubl_lcd_clicked()) // Debounce Encoder Wheel + idle(); #if ENABLED(ULTRA_LCD) - ubl_has_control_of_lcd_panel = false; lcd_setstatus("Done Priming", true); // Now we do it right. lcd_quick_feedback(); #endif @@ -917,6 +934,7 @@ set_destination_to_current(); retract_filament(); } + return UBL_OK; } diff --git a/Marlin/UBL_Bed_Leveling.cpp b/Marlin/UBL_Bed_Leveling.cpp index cc4875a443..55f7a6d43b 100644 --- a/Marlin/UBL_Bed_Leveling.cpp +++ b/Marlin/UBL_Bed_Leveling.cpp @@ -175,8 +175,13 @@ current_xi = ubl.get_cell_index_x(current_position[X_AXIS] + (MESH_X_DIST) / 2.0); current_yi = ubl.get_cell_index_y(current_position[Y_AXIS] + (MESH_Y_DIST) / 2.0); - for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) - SERIAL_ECHOPGM(" "); + for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) { + SERIAL_ECHOPGM(" "); + #if TX_BUFFER_SIZE>0 + MYSERIAL.flushTX(); + #endif + delay(15); + } SERIAL_ECHOPAIR("(", UBL_MESH_NUM_X_POINTS - 1); SERIAL_ECHOPAIR(",", UBL_MESH_NUM_Y_POINTS - 1); @@ -188,8 +193,13 @@ SERIAL_ECHOPAIR(",", UBL_MESH_MAX_Y); SERIAL_CHAR(')'); - for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) - SERIAL_ECHOPGM(" "); + for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) { + SERIAL_ECHOPGM(" "); + #if TX_BUFFER_SIZE>0 + MYSERIAL.flushTX(); + #endif + delay(15); + } SERIAL_ECHOPAIR("(", UBL_MESH_MAX_X); SERIAL_ECHOPAIR(",", UBL_MESH_MAX_Y); @@ -205,13 +215,17 @@ SERIAL_CHAR(i == current_xi && j == current_yi ? '[' : ' '); if (isnan(f)) - SERIAL_PROTOCOLPGM(" . "); + SERIAL_PROTOCOLPGM(" . "); else { // if we don't do this, the columns won't line up nicely if (f >= 0.0) SERIAL_CHAR(' '); - SERIAL_PROTOCOL_F(f, 5); + SERIAL_PROTOCOL_F(f, 3); idle(); } + #if TX_BUFFER_SIZE>0 + MYSERIAL.flushTX(); + #endif + delay(15); if (i == current_xi && j == current_yi) // is the nozzle here? if so, finish marking the number SERIAL_CHAR(']'); else @@ -231,27 +245,34 @@ SERIAL_ECHOPAIR(",", int(UBL_MESH_MIN_Y)); SERIAL_ECHOPGM(") "); - for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) - SERIAL_ECHOPGM(" "); + for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) { + SERIAL_ECHOPGM(" "); + #if TX_BUFFER_SIZE>0 + MYSERIAL.flushTX(); + #endif + delay(15); + } SERIAL_ECHOPAIR("(", int(UBL_MESH_MAX_X)); SERIAL_ECHOPAIR(",", int(UBL_MESH_MIN_Y)); SERIAL_CHAR(')'); - // } + SERIAL_EOL; SERIAL_ECHOPAIR("(", 0); SERIAL_ECHOPAIR(",", 0); SERIAL_ECHOPGM(") "); - for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) - SERIAL_ECHOPGM(" "); + for (i = 0; i < UBL_MESH_NUM_X_POINTS - 1; i++) { + SERIAL_ECHOPGM(" "); + #if TX_BUFFER_SIZE>0 + MYSERIAL.flushTX(); + #endif + delay(15); + } SERIAL_ECHOPAIR("(", UBL_MESH_NUM_X_POINTS-1); SERIAL_ECHOPAIR(",", 0); - SERIAL_CHAR(')'); - - SERIAL_CHAR(' '); - SERIAL_EOL; + SERIAL_ECHOLNPGM(")"); } bool unified_bed_leveling::sanity_check() { diff --git a/Marlin/UBL_G29.cpp b/Marlin/UBL_G29.cpp index 0c74f67773..026045a7bc 100644 --- a/Marlin/UBL_G29.cpp +++ b/Marlin/UBL_G29.cpp @@ -594,18 +594,18 @@ save_ubl_active_state_and_disable(); //measured_z = probe_pt(x_pos + X_PROBE_OFFSET_FROM_EXTRUDER, y_pos + Y_PROBE_OFFSET_FROM_EXTRUDER, ProbeDeployAndStow, g29_verbose_level); + ubl_has_control_of_lcd_panel = true;// Grab the LCD Hardware measured_z = 1.5; do_blocking_move_to_z(measured_z); // Get close to the bed, but leave some space so we don't damage anything // The user is not going to be locking in a new Z-Offset very often so // it won't be that painful to spin the Encoder Wheel for 1.5mm lcd_implementation_clear(); lcd_z_offset_edit_setup(measured_z); - wait_for_user = true; do { measured_z = lcd_z_offset_edit(); idle(); do_blocking_move_to_z(measured_z); - } while (wait_for_user); + } while (!ubl_lcd_clicked()); ubl_has_control_of_lcd_panel++; // There is a race condition for the Encoder Wheel getting clicked. // It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) @@ -707,14 +707,17 @@ save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe DEPLOY_PROBE(); - wait_for_user = true; do { - if (!wait_for_user) { - SERIAL_PROTOCOLLNPGM("\nMesh only partially populated."); + if (ubl_lcd_clicked()) { + SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.\n"); lcd_quick_feedback(); - ubl_has_control_of_lcd_panel = false; STOW_PROBE(); + while (ubl_lcd_clicked() ) { + idle(); + } + ubl_has_control_of_lcd_panel = false; restore_ubl_active_state_and_leave(); + delay(50); // Debounce the Encoder wheel return; } @@ -737,7 +740,6 @@ LEAVE: - wait_for_user = false; STOW_PROBE(); restore_ubl_active_state_and_leave(); @@ -813,8 +815,7 @@ } float use_encoder_wheel_to_measure_point() { - wait_for_user = true; - while (wait_for_user) { // we need the loop to move the nozzle based on the encoder wheel here! + while (!ubl_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here! idle(); if (ubl_encoderDiff) { do_blocking_move_to_z(current_position[Z_AXIS] + 0.01 * float(ubl_encoderDiff)); @@ -891,8 +892,8 @@ last_x = xProbe; last_y = yProbe; - wait_for_user = true; - while (wait_for_user) { // we need the loop to move the nozzle based on the encoder wheel here! + ubl_has_control_of_lcd_panel = true; + while (!ubl_lcd_clicked) { // we need the loop to move the nozzle based on the encoder wheel here! idle(); if (ubl_encoderDiff) { do_blocking_move_to_z(current_position[Z_AXIS] + float(ubl_encoderDiff) / 100.0);