Clean up LCD conditionals, DWIN

2.0.x
Scott Lahteine 4 years ago
parent b709baba7a
commit a445746a8b

@ -72,9 +72,9 @@
#endif
#if ENABLED(DWIN_CREALITY_LCD)
#include "lcd/dwin/dwin.h"
#include "lcd/dwin/e3v2/dwin.h"
#include "lcd/dwin/dwin_lcd.h"
#include "lcd/dwin/rotary_encoder.h"
#include "lcd/dwin/e3v2/rotary_encoder.h"
#endif
#if ENABLED(IIC_BL24CXX_EEPROM)

@ -89,7 +89,9 @@ public:
#endif
#if HAS_SPI_LCD
FORCE_INLINE static bool display_enabled() { return flags != 0x00; }
#if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI)
FORCE_INLINE static bool display_enabled() { return flags != 0x00; }
#endif
#if ENABLED(POWER_MONITOR_CURRENT)
static void draw_current();
FORCE_INLINE static bool current_display_enabled() { return TEST(flags, PM_DISP_BIT_I); }

@ -61,7 +61,7 @@
#endif
#if ENABLED(DWIN_CREALITY_LCD)
#include "../../../lcd/dwin/dwin.h"
#include "../../../lcd/dwin/e3v2/dwin.h"
#endif
#if HAS_MULTI_HOTEND

@ -47,7 +47,7 @@
#include "../../lcd/ultralcd.h"
#if ENABLED(DWIN_CREALITY_LCD)
#include "../../lcd/dwin/dwin.h"
#include "../../lcd/dwin/e3v2/dwin.h"
#endif
#if HAS_L64XX // set L6470 absolute position registers to counts

@ -26,6 +26,7 @@
* Conditionals that need to be set before Configuration_adv.h or pins.h
*/
// Kinematics
#if ENABLED(MORGAN_SCARA)
#define IS_SCARA 1
#define IS_KINEMATIC 1
@ -35,10 +36,26 @@
#define IS_CARTESIAN 1
#endif
// MKS_LCD12864 is a variant of MKS_MINI_12864
#if ENABLED(MKS_LCD12864)
#define MKS_MINI_12864
#endif
/**
* General Flags that may be set below by specific LCDs
*
* DOGLCD : Run a Graphical LCD through U8GLib (with MarlinUI)
* IS_ULTIPANEL : Define LCD_PINS_D5/6/7 for direct-connected "Ultipanel" LCDs
* IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel. Used most often with NEWPANEL.
* IS_RRD_SC : Common RRD Smart Controller digital interface pins
* IS_RRD_FG_SC : Common RRD Full Graphical Smart Controller digital interface pins
* U8GLIB_ST7920 : Most common DOGM display SPI interface, supporting a "lightweight" display mode.
* U8GLIB_SH1106 : SH1106 OLED with I2C interface via U8GLib
* IS_U8GLIB_SSD1306 : SSD1306 OLED with I2C interface via U8GLib
* U8GLIB_SSD1309 : SSD1309 OLED with I2C interface via U8GLib
* U8GLIB_ST7565_64128N : ST7565 128x64 LCD with SPI interface via U8GLib
* U8GLIB_LM6059_AF : LM6059 with Hardware SPI via U8GLib
*/
#if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#define MINIPANEL
@ -48,6 +65,11 @@
#define DOGLCD
#define IS_ULTIPANEL
#elif EITHER(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE)
#define IS_DWIN_MARLINUI 1
#define IS_ULTIPANEL
#elif ENABLED(ZONESTAR_LCD)
#define ADC_KEYPAD
@ -85,7 +107,6 @@
#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
#define IS_ULTRA_LCD
#define DOGLCD
#define IS_ULTIPANEL
@ -234,9 +255,9 @@
// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
#define HAS_SSD1306_OLED_I2C 1
#define HAS_U8GLIB_I2C_OLED 1
#endif
#if HAS_SSD1306_OLED_I2C
#if HAS_U8GLIB_I2C_OLED
#define IS_ULTRA_LCD
#define DOGLCD
#endif
@ -402,7 +423,6 @@
#define IS_ULTRA_LCD
#define NEWPANEL
#endif
#if ENABLED(IS_ULTRA_LCD)
#define ULTRA_LCD
#endif

@ -2612,14 +2612,14 @@
#ifndef LCD_WIDTH
#if HAS_GRAPHICAL_LCD
#define LCD_WIDTH 21
#else
#elif HAS_CHARACTER_LCD
#define LCD_WIDTH TERN(ULTIPANEL, 20, 16)
#endif
#endif
#ifndef LCD_HEIGHT
#if HAS_GRAPHICAL_LCD
#define LCD_HEIGHT 5
#else
#elif HAS_CHARACTER_LCD
#define LCD_HEIGHT TERN(ULTIPANEL, 4, 2)
#endif
#endif

@ -982,7 +982,7 @@ int lcd_put_wchar_max(wchar_t c, pixel_len_t max_length) {
if (max_length < 1) return 0;
// TODO: fix the '\\' that doesnt exist in the HD44870
// TODO: fix the '\\' that doesn't exist in the HD44870
if (c < 128) {
lcd.write((uint8_t)c);
return 1;

@ -37,6 +37,9 @@
#include "dwin_lcd.h"
#include <string.h> // for memset
//#define DEBUG_OUT 1
#include "../../core/debug_out.h"
// Make sure DWIN_SendBuf is large enough to hold the largest string plus draw command and tail.
// Assume the narrowest (6 pixel) font and 2-byte gb2312-encoded characters.
uint8_t DWIN_SendBuf[11 + DWIN_WIDTH / 6 * 2] = { 0xAA };
@ -79,10 +82,8 @@ inline void DWIN_String(size_t &i, const __FlashStringHelper * string) {
// Send the data in the buffer and the packet end
inline void DWIN_Send(size_t &i) {
++i;
LOOP_L_N(n, i) { MYSERIAL1.write(DWIN_SendBuf[n]);
delayMicroseconds(1); }
LOOP_L_N(n, 4) { MYSERIAL1.write(DWIN_BufTail[n]);
delayMicroseconds(1); }
LOOP_L_N(n, i) { MYSERIAL1.write(DWIN_SendBuf[n]); delayMicroseconds(1); }
LOOP_L_N(n, 4) { MYSERIAL1.write(DWIN_BufTail[n]); delayMicroseconds(1); }
}
/*-------------------------------------- System variable function --------------------------------------*/
@ -185,7 +186,6 @@ void DWIN_Draw_Rectangle(uint8_t mode, uint16_t color,
DWIN_Send(i);
}
//
// Move a screen area
// mode: 0, circle shift; 1, translation
// dir: 0=left, 1=right, 2=up, 3=down
@ -230,19 +230,6 @@ void DWIN_Draw_String(bool widthAdjust, bool bShow, uint8_t size,
DWIN_Send(i);
}
void DWIN_Draw_String(bool widthAdjust, bool bShow, uint8_t size,
uint16_t color, uint16_t bColor, uint16_t x, uint16_t y, const __FlashStringHelper *string) {
size_t i = 0;
DWIN_Byte(i, 0x11);
DWIN_Byte(i, (widthAdjust * 0x80) | (bShow * 0x40) | size);
DWIN_Word(i, color);
DWIN_Word(i, bColor);
DWIN_Word(i, x);
DWIN_Word(i, y);
DWIN_String(i, string);
DWIN_Send(i);
}
// Draw a positive integer
// bShow: true=display background color; false=don't display background color
// zeroFill: true=zero fill; false=no zero fill
@ -343,8 +330,9 @@ void DWIN_ICON_Show(uint8_t libID, uint8_t picID, uint16_t x, uint16_t y) {
DWIN_Send(i);
}
// Unzip the JPG picture to virtual display area #1
// id: picture ID
// Unzip the JPG picture to a virtual display area
// n: Cache index
// id: Picture ID
void DWIN_JPG_CacheToN(uint8_t n, uint8_t id) {
size_t i = 0;
DWIN_Byte(i, 0x25);

@ -42,70 +42,151 @@
#define DWIN_WIDTH 272
#define DWIN_HEIGHT 480
/*接收数据解析 返回值:true,接收到数据;false,未接收到数据*/
bool DWIN_ReceiveAnalyze(void);
/*-------------------------------------- System variable function --------------------------------------*/
/*发送当前BUF中的数据以及包尾数据 len:整包数据长度*/
void DWIN_Send_BufTail(const uint8_t len);
/*----------------------------------------------系统变量函数----------------------------------------------*/
/*握手 1: 握手成功 2: 握手失败*/
// Handshake (1: Success, 0: Fail)
bool DWIN_Handshake(void);
/*设定背光亮度 luminance:亮度(0x00~0xFF)*/
// Common DWIN startup
void DWIN_Startup(void);
// Set the backlight luminance
// luminance: (0x00-0xFF)
void DWIN_Backlight_SetLuminance(const uint8_t luminance);
/*设定画面显示方向 dir:0,0°; 1,90°; 2,180°; 3,270°*/
// Set screen display direction
// dir: 0=0°, 1=90°, 2=180°, 3=270°
void DWIN_Frame_SetDir(uint8_t dir);
/*更新显示*/
// Update display
void DWIN_UpdateLCD(void);
/*----------------------------------------------绘图相关函数----------------------------------------------*/
/*画面清屏 color:清屏颜色*/
/*---------------------------------------- Drawing functions ----------------------------------------*/
// Clear screen
// color: Clear screen color
void DWIN_Frame_Clear(const uint16_t color);
/*画面画线 color:线段颜色 xStart:X起始坐标 yStart:Y起始坐标 xEnd:X终止坐标 yEnd:Y终止坐标*/
// Draw a line
// color: Line segment color
// xStart/yStart: Start point
// xEnd/yEnd: End point
void DWIN_Draw_Line(uint16_t color, uint16_t xStart, uint16_t yStart, uint16_t xEnd, uint16_t yEnd);
/*画面画矩形 mode:0,外框;1,填充;2,异或填充 color:颜色 xStart/yStart:矩形左上坐标 xEnd/yEnd:矩形右下坐标*/
// Draw a Horizontal line
// color: Line segment color
// xStart/yStart: Start point
// xLength: Line Length
inline void DWIN_Draw_HLine(uint16_t color, uint16_t xStart, uint16_t yStart, uint16_t xLength) {
DWIN_Draw_Line(color, xStart, yStart, xStart + xLength - 1, yStart);
}
// Draw a Vertical line
// color: Line segment color
// xStart/yStart: Start point
// yLength: Line Length
inline void DWIN_Draw_VLine(uint16_t color, uint16_t xStart, uint16_t yStart, uint16_t yLength) {
DWIN_Draw_Line(color, xStart, yStart, xStart, yStart + yLength - 1);
}
// Draw a rectangle
// mode: 0=frame, 1=fill, 2=XOR fill
// color: Rectangle color
// xStart/yStart: upper left point
// xEnd/yEnd: lower right point
void DWIN_Draw_Rectangle(uint8_t mode, uint16_t color,
uint16_t xStart, uint16_t yStart, uint16_t xEnd, uint16_t yEnd);
/*画面区域移动 mode:0,环移;1,平移 dir:0,向左移动;1,向右移动;2,向上移动;3,向下移动 dis:移动距离
color: xStart/yStart: xEnd/yEnd:*/
// Draw a box
// mode: 0=frame, 1=fill, 2=XOR fill
// color: Rectangle color
// xStart/yStart: upper left point
// xSize/ySize: box size
inline void DWIN_Draw_Box(uint8_t mode, uint16_t color, uint16_t xStart, uint16_t yStart, uint16_t xSize, uint16_t ySize) {
DWIN_Draw_Rectangle(mode, color, xStart, yStart, xStart + xSize - 1, yStart + ySize - 1);
}
// Move a screen area
// mode: 0, circle shift; 1, translation
// dir: 0=left, 1=right, 2=up, 3=down
// dis: Distance
// color: Fill color
// xStart/yStart: upper left point
// xEnd/yEnd: bottom right point
void DWIN_Frame_AreaMove(uint8_t mode, uint8_t dir, uint16_t dis,
uint16_t color, uint16_t xStart, uint16_t yStart, uint16_t xEnd, uint16_t yEnd);
/*----------------------------------------------文本相关函数----------------------------------------------*/
/*画面显示字符串 widthAdjust:true,自调整字符宽度;false,不调整字符宽度 bShow:true,显示背景色;false,不显示背景色 size:字号大小
color: bColor: x/y: *string:*/
/*---------------------------------------- Text related functions ----------------------------------------*/
// Draw a string
// widthAdjust: true=self-adjust character width; false=no adjustment
// bShow: true=display background color; false=don't display background color
// size: Font size
// color: Character color
// bColor: Background color
// x/y: Upper-left coordinate of the string
// *string: The string
void DWIN_Draw_String(bool widthAdjust, bool bShow, uint8_t size,
uint16_t color, uint16_t bColor, uint16_t x, uint16_t y, char *string);
/*画面显示正整数 bShow:true,显示背景色;false,不显示背景色 zeroFill:true,补零;false,不补零 zeroMode:1,无效0显示为0; 0,无效0显示为空格 size:字号大小
color: bColor: iNum: x/y: value:*/
class __FlashStringHelper;
inline void DWIN_Draw_String(bool widthAdjust, bool bShow, uint8_t size, uint16_t color, uint16_t bColor, uint16_t x, uint16_t y, const __FlashStringHelper *title) {
DWIN_Draw_String(widthAdjust, bShow, size, color, bColor, x, y, (char *)title);
}
// Draw a positive integer
// bShow: true=display background color; false=don't display background color
// zeroFill: true=zero fill; false=no zero fill
// zeroMode: 1=leading 0 displayed as 0; 0=leading 0 displayed as a space
// size: Font size
// color: Character color
// bColor: Background color
// iNum: Number of digits
// x/y: Upper-left coordinate
// value: Integer value
void DWIN_Draw_IntValue(uint8_t bShow, bool zeroFill, uint8_t zeroMode, uint8_t size, uint16_t color,
uint16_t bColor, uint8_t iNum, uint16_t x, uint16_t y, uint16_t value);
/*画面显示浮点数 bShow:true,显示背景色;false,不显示背景色 zeroFill:true,补零;false,不补零 zeroMode:1,无效0显示为0; 0,无效0显示为空格 size:字号大小
color: bColor: iNum: fNum: x/y: value:*/
// Draw a floating point number
// bShow: true=display background color; false=don't display background color
// zeroFill: true=zero fill; false=no zero fill
// zeroMode: 1=leading 0 displayed as 0; 0=leading 0 displayed as a space
// size: Font size
// color: Character color
// bColor: Background color
// iNum: Number of whole digits
// fNum: Number of decimal digits
// x/y: Upper-left point
// value: Float value
void DWIN_Draw_FloatValue(uint8_t bShow, bool zeroFill, uint8_t zeroMode, uint8_t size, uint16_t color,
uint16_t bColor, uint8_t iNum, uint8_t fNum, uint16_t x, uint16_t y, long value);
/*----------------------------------------------图片相关函数----------------------------------------------*/
/*jpg图片显示并缓存在#0虚拟显示区 id:图片ID*/
/*---------------------------------------- Picture related functions ----------------------------------------*/
// Draw JPG and cached in #0 virtual display area
// id: Picture ID
void DWIN_JPG_ShowAndCache(const uint8_t id);
/*图标显示 libID:图标库ID picID:图标ID x/y:图标左上坐标*/
// Draw an Icon
// libID: Icon library ID
// picID: Icon ID
// x/y: Upper-left point
void DWIN_ICON_Show(uint8_t libID, uint8_t picID, uint16_t x, uint16_t y);
/*jpg图片解压到#1虚拟显示区 id:图片ID*/
// Unzip the JPG picture to a virtual display area
// n: Cache index
// id: Picture ID
void DWIN_JPG_CacheToN(uint8_t n, uint8_t id);
/*jpg图片解压到#1虚拟显示区 id:图片ID*/
// Unzip the JPG picture to virtual display area #1
// id: Picture ID
inline void DWIN_JPG_CacheTo1(uint8_t id) { DWIN_JPG_CacheToN(1, id); }
/*从虚拟显示区复制区域至当前画面 cacheID:虚拟区号 xStart/yStart:虚拟区左上坐标 xEnd/yEnd:虚拟区右下坐标 x/y:当前画面粘贴坐标*/
// Copy area from virtual display area to current screen
// cacheID: virtual area number
// xStart/yStart: Upper-left of virtual area
// xEnd/yEnd: Lower-right of virtual area
// x/y: Screen paste point
void DWIN_Frame_AreaCopy(uint8_t cacheID, uint16_t xStart, uint16_t yStart,
uint16_t xEnd, uint16_t yEnd, uint16_t x, uint16_t y);

@ -24,7 +24,7 @@
* DWIN by Creality3D
*/
#include "../../inc/MarlinConfigPre.h"
#include "../../../inc/MarlinConfigPre.h"
#if ENABLED(DWIN_CREALITY_LCD)
@ -38,35 +38,35 @@
#include <stdio.h>
#include <string.h>
#include "../fontutils.h"
#include "../ultralcd.h"
#include "../../fontutils.h"
#include "../../ultralcd.h"
#include "../../sd/cardreader.h"
#include "../../../sd/cardreader.h"
#include "../../MarlinCore.h"
#include "../../core/serial.h"
#include "../../core/macros.h"
#include "../../gcode/queue.h"
#include "../../../MarlinCore.h"
#include "../../../core/serial.h"
#include "../../../core/macros.h"
#include "../../../gcode/queue.h"
#include "../../feature/powerloss.h"
#include "../../feature/babystep.h"
#include "../../../feature/powerloss.h"
#include "../../../feature/babystep.h"
#include "../../module/settings.h"
#include "../../module/temperature.h"
#include "../../module/printcounter.h"
#include "../../module/motion.h"
#include "../../module/planner.h"
#include "../../../module/settings.h"
#include "../../../module/temperature.h"
#include "../../../module/printcounter.h"
#include "../../../module/motion.h"
#include "../../../module/planner.h"
#if ENABLED(HOST_ACTION_COMMANDS)
#include "../../feature/host_actions.h"
#include "../../../feature/host_actions.h"
#endif
#if HAS_ONESTEP_LEVELING
#include "../../feature/bedlevel/bedlevel.h"
#include "../../../feature/bedlevel/bedlevel.h"
#endif
#if HAS_BED_PROBE
#include "../../module/probe.h"
#include "../../../module/probe.h"
#endif
#ifndef MACHINE_SIZE
@ -1532,7 +1532,7 @@ void update_variable(void) {
#define strcasecmp_P(a, b) strcasecmp((a), (b))
#endif
inline void make_name_without_ext(char *dst, char *src, int maxlen=MENU_CHAR_LIMIT) {
inline void make_name_without_ext(char *dst, char *src, size_t maxlen=MENU_CHAR_LIMIT) {
char * const name = card.longest_filename();
size_t pos = strlen(name); // index of ending nul
@ -2137,7 +2137,7 @@ inline void Draw_Move_Menu() {
LOOP_L_N(i, MROWS) Draw_Menu_Line(i + 1, ICON_MoveX + i);
}
#include "../../libs/buzzer.h"
#include "../../../libs/buzzer.h"
void HMI_AudioFeedback(const bool success=true) {
if (success) {

@ -25,9 +25,9 @@
* DWIN by Creality3D
*/
#include "dwin_lcd.h"
#include "../dwin_lcd.h"
#include "rotary_encoder.h"
#include "../../libs/BL24CXX.h"
#include "../../../libs/BL24CXX.h"
#include <stdint.h>

@ -30,17 +30,17 @@
******************************************************************************
**/
#include "../../inc/MarlinConfigPre.h"
#include "../../../inc/MarlinConfigPre.h"
#if ENABLED(DWIN_CREALITY_LCD)
#include "rotary_encoder.h"
#include "../../MarlinCore.h"
#include "../../HAL/shared/Delay.h"
#include "../../../MarlinCore.h"
#include "../../../HAL/shared/Delay.h"
#if HAS_BUZZER
#include "../../libs/buzzer.h"
#include "../../../libs/buzzer.h"
#endif
#include <stdlib.h>

@ -31,8 +31,8 @@
******************************************************************************
**/
#include "../../inc/MarlinConfig.h"
#include "../../MarlinCore.h"
#include "../../../inc/MarlinConfig.h"
#include "../../../MarlinCore.h"
/*********************** Encoder Set ***********************/

@ -79,7 +79,7 @@
#define SETCURSOR(col, row) lcd_moveto((col) * (MENU_FONT_WIDTH), ((row) + 1) * (MENU_FONT_HEIGHT))
#define SETCURSOR_RJ(len, row) lcd_moveto(LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH), ((row) + 1) * (MENU_FONT_HEIGHT))
#else
#elif HAS_CHARACTER_LCD
#define _UxGT(a) a
typedef uint8_t lcd_uint_t;

@ -312,16 +312,18 @@ public:
static void media_changed(const uint8_t old_stat, const uint8_t stat);
#endif
#if ENABLED(DWIN_CREALITY_LCD)
static void refresh();
#else
FORCE_INLINE static void refresh() {
TERN_(HAS_SPI_LCD, refresh(LCDVIEW_CLEAR_CALL_REDRAW));
}
#endif
#if HAS_SPI_LCD
static bool detected();
static void init_lcd();
FORCE_INLINE static void refresh() { refresh(LCDVIEW_CLEAR_CALL_REDRAW); }
#else
#if ENABLED(DWIN_CREALITY_LCD)
static void refresh();
#else
static inline void refresh() {}
#endif
static inline bool detected() { return true; }
static inline void init_lcd() {}
#endif
@ -403,14 +405,10 @@ public:
#if HAS_GRAPHICAL_LCD
static bool drawing_screen, first_page;
static void set_font(const MarlinFont font_nr);
#else
static constexpr bool drawing_screen = false, first_page = true;
static void set_custom_characters(const HD44780CharSet screen_charset=CHARSET_INFO);
#if ENABLED(LCD_PROGRESS_BAR)
@ -460,6 +458,12 @@ public:
#endif
#if HAS_GRAPHICAL_LCD
static bool drawing_screen, first_page;
#else
static constexpr bool drawing_screen = false, first_page = true;
#endif
static bool get_blink();
static void kill_screen(PGM_P const lcd_error, PGM_P const lcd_component);
static void draw_kill_screen();

@ -52,7 +52,7 @@
#include "temperature.h"
#if ENABLED(DWIN_CREALITY_LCD)
#include "../lcd/dwin/dwin.h"
#include "../lcd/dwin/e3v2/dwin.h"
#endif
#include "../lcd/ultralcd.h"

@ -37,7 +37,7 @@
#include "../lcd/ultralcd.h"
#if ENABLED(DWIN_CREALITY_LCD)
#include "../lcd/dwin/dwin.h"
#include "../lcd/dwin/e3v2/dwin.h"
#endif
#if ENABLED(EXTENSIBLE_UI)

@ -289,20 +289,21 @@
#define E0_CS_PIN P2_11
#define E1_CS_PIN P4_28
// Hardware SPI is on EXP2. See if you can make it work:
// https://github.com/makerbase-mks/MKS-SBASE/issues/25
#define TMC_USE_SW_SPI
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P0_03 // AUX1
// Hardware SPI is on EXP2. See if you can make it work:
// https://github.com/makerbase-mks/MKS-SBASE/issues/25
#define TMC_USE_SW_SPI
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P0_03 // AUX1
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_02 // AUX1
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_26 // TH4
#endif
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_02 // AUX1
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_26 // TH4
#endif
#endif
#endif
#if MB(MKS_SBASE) && HAS_TMC_UART

@ -125,16 +125,16 @@
// EXP1 Pins
#define BEEPER_PIN P1_31 // EXP1 Pin 1
#define BTN_ENC P1_30 // EXP1 Pin 2
#define LCD_PINS_ENABLE P0_18 // EXP1 Pin 3 (MOSI)
#define LCD_PINS_RS P0_16 // EXP1 Pin 4 (CS)
#define LCD_PINS_ENABLE P0_18 // EXP1 Pin 3 (MOSI)
#define LCD_PINS_RS P0_16 // EXP1 Pin 4 (CS)
#define LCD_PINS_D4 P0_15 // EXP1 Pin 5 (SCK)
// EXP2 Pins
// EXP2 Pins
#define BTN_EN2 P3_26 // EXP2 Pin 3
#define BTN_EN1 P3_25 // EXP2 Pin 5
/*
SD Support
For the RRD GLCD it CANNOT share the same SPI as the LCD so it must be
hooked up to the onboard SDCard SPI and use a spare pin for the SDCS.
Also note that an external SDCard sharing the SPI port with the
@ -145,11 +145,11 @@
*/
#define MISO_PIN P0_08 // EXP2 Pin 1 (PB3, SD_MISO)
#define SCK_PIN P0_07 // EXP2 Pin 2 (SD_SCK)
#define SCK_PIN P0_07 // EXP2 Pin 2 (SD_SCK)
#define SS_PIN P0_28 // EXP2 Pin 4 (SD_CSEL, SD_CS)
#define MOSI_PIN P0_09 // EXP2 Pin 6 (PB2, SD_MOSI)
#define SD_DETECT_PIN P0_27 // EXP2 Pin 7 (SD_CD, SD_DET)
#else
#error "Marlin's Smoothieboard support cannot drive your LCD."
#endif

@ -124,7 +124,7 @@
#define SD_DETECT_PIN -1 // RAMPS doesn't use this
#endif // HAS_SPI_LCD && NEWPANEL
#endif // ULTRA_LCD && NEWPANEL
//
// M3/M4/M5 - Spindle/Laser Control

@ -166,11 +166,11 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE)
#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#define KILL_PIN 32
#if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE)
#if ANY(ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 85
@ -194,5 +194,6 @@
#define SD_DETECT_PIN 15
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE

@ -189,4 +189,4 @@
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL

@ -144,17 +144,16 @@
// LCD / Controller
//
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 18
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 19
#define BEEPER_PIN 64
#undef UI_VOLTAGE_LEVEL
#define UI_VOLTAGE_LEVEL 1
#endif
#if ENABLED(NEWPANEL)
#define BTN_EN1 14
#define BTN_EN2 16
#define BTN_ENC 17
#undef UI_VOLTAGE_LEVEL
#define UI_VOLTAGE_LEVEL 1
#endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#endif

@ -237,7 +237,7 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE)
#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
#define BEEPER_PIN 23 // D24 PA15_CTS1
#define LCD_PINS_RS 17 // D17 PA12_RXD1
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
@ -248,10 +248,10 @@
#define SD_DETECT_PIN 2 // D2 PB25_TIOA0
#if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE)
#if ANY(ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
// Buttons on AUX-2
#define BTN_EN1 60 // D60 PA3_TIOB1
#define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1 // the click
#endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
#endif
#endif

@ -147,7 +147,7 @@
#define SDSS 4
#define SD_DETECT_PIN 14
#elif HAS_SSD1306_OLED_I2C
#elif HAS_U8GLIB_I2C_OLED
#define BTN_EN1 50
#define BTN_EN2 52

@ -139,7 +139,7 @@
#define SDSS 4
#define SD_DETECT_PIN 14
#elif HAS_SSD1306_OLED_I2C
#elif HAS_U8GLIB_I2C_OLED
#define BTN_EN1 50
#define BTN_EN2 52

@ -266,7 +266,7 @@
#define SDSS 10
#define SD_DETECT_PIN 14
#elif HAS_SSD1306_OLED_I2C
#elif HAS_U8GLIB_I2C_OLED
#define BTN_EN1 50
#define BTN_EN2 52

@ -221,7 +221,7 @@
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
#elif HAS_SSD1306_OLED_I2C
#elif HAS_U8GLIB_I2C_OLED
#define BEEPER_PIN 62
#define LCD_SDSS 10

@ -207,7 +207,7 @@
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
#elif HAS_SSD1306_OLED_I2C
#elif HAS_U8GLIB_I2C_OLED
#define BEEPER_PIN 62
#define LCD_SDSS 10

@ -163,7 +163,7 @@
#define LCD_PINS_D6 16
#define LCD_PINS_D7 17
#define ADC_KEYPAD_PIN 1
#elif EITHER(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD)
#elif EITHER(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
// Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics
// display using an adapter board // https://go.aisler.net/benlye/anet-lcd-adapter/pcb
// See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748

@ -166,4 +166,4 @@
#endif
#endif // HAS_SPI_LCD && NEWPANEL
#endif // ULTRA_LCD && NEWPANEL

@ -155,7 +155,7 @@
#define SD_DETECT_PIN -1
#endif // HAS_SPI_LCD && NEWPANEL
#endif // ULTRA_LCD && NEWPANEL
//
// M3/M4/M5 - Spindle/Laser Control

@ -32,7 +32,7 @@
#include "../lcd/ultralcd.h"
#if ENABLED(DWIN_CREALITY_LCD)
#include "../lcd/dwin/dwin.h"
#include "../lcd/dwin/e3v2/dwin.h"
#endif
#include "../module/planner.h" // for synchronize

@ -94,9 +94,7 @@ static_assert(USB_INTR_PIN != -1, "USB_INTR_PIN must be defined");
#include "Sd2Card_FlashDrive.h"
#if HAS_DISPLAY
#include "../../lcd/ultralcd.h"
#endif
#include "../../lcd/ultralcd.h"
static enum {
UNINITIALIZED,
@ -116,9 +114,7 @@ bool Sd2Card::usbStartup() {
SERIAL_ECHOPGM("Starting USB host...");
if (!UHS_START) {
SERIAL_ECHOLNPGM(" failed.");
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM(MSG_MEDIA_USB_FAILED);
#endif
LCD_MESSAGEPGM(MSG_MEDIA_USB_FAILED);
return false;
}
@ -213,9 +209,7 @@ void Sd2Card::idle() {
#if USB_DEBUG >= 1
SERIAL_ECHOLNPGM("Waiting for media");
#endif
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM(MSG_MEDIA_WAITING);
#endif
LCD_MESSAGEPGM(MSG_MEDIA_WAITING);
GOTO_STATE_AFTER_DELAY(state, 2000);
}
break;
@ -229,11 +223,9 @@ void Sd2Card::idle() {
#if USB_DEBUG >= 1
SERIAL_ECHOLNPGM("USB device removed");
#endif
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
if (state != MEDIA_READY)
LCD_MESSAGEPGM(MSG_MEDIA_USB_REMOVED);
#endif
GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 );
if (state != MEDIA_READY)
LCD_MESSAGEPGM(MSG_MEDIA_USB_REMOVED);
GOTO_STATE_AFTER_DELAY(WAIT_FOR_DEVICE, 0);
}
else if (state > WAIT_FOR_LUN && !bulk.LUNIsGood(0)) {
@ -241,17 +233,13 @@ void Sd2Card::idle() {
#if USB_DEBUG >= 1
SERIAL_ECHOLNPGM("Media removed");
#endif
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM(MSG_MEDIA_REMOVED);
#endif
GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 );
LCD_MESSAGEPGM(MSG_MEDIA_REMOVED);
GOTO_STATE_AFTER_DELAY(WAIT_FOR_DEVICE, 0);
}
else if (task_state == UHS_STATE(ERROR)) {
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM(MSG_MEDIA_READ_ERROR);
#endif
GOTO_STATE_AFTER_DELAY( MEDIA_ERROR, 0 );
LCD_MESSAGEPGM(MSG_MEDIA_READ_ERROR);
GOTO_STATE_AFTER_DELAY(MEDIA_ERROR, 0);
}
}
}

Loading…
Cancel
Save