🐛 Fix up endstop flags (#22487, #22525)

Marlin/src/inc/Conditionals_post.h

@@ -2495,16 +2495,16 @@
 #if _HAS_STOP(X,MAX)
   #define HAS_X_MAX 1
 #endif
-#if HAS_Y_AXIS && _HAS_STOP(Y,MIN)
+#if _HAS_STOP(Y,MIN)
   #define HAS_Y_MIN 1
 #endif
-#if HAS_Y_AXIS && _HAS_STOP(Y,MAX)
+#if _HAS_STOP(Y,MAX)
   #define HAS_Y_MAX 1
 #endif
-#if BOTH(HAS_Z_AXIS, USE_ZMIN_PLUG) && _HAS_STOP(Z,MIN)
+#if _HAS_STOP(Z,MIN)
   #define HAS_Z_MIN 1
 #endif
-#if BOTH(HAS_Z_AXIS, USE_ZMAX_PLUG) && _HAS_STOP(Z,MAX)
+#if _HAS_STOP(Z,MAX)
   #define HAS_Z_MAX 1
 #endif
 #if _HAS_STOP(I,MIN)
@@ -2555,10 +2555,12 @@
 #if PIN_EXISTS(Z4_MAX)
   #define HAS_Z4_MAX 1
 #endif
+
 #if HAS_BED_PROBE && PIN_EXISTS(Z_MIN_PROBE)
   #define HAS_Z_MIN_PROBE_PIN 1
 #endif
 
+#undef _HAS_STOP
 #undef IS_PROBE_PIN
 #undef IS_X2_ENDSTOP
 #undef IS_Y2_ENDSTOP

Marlin/src/module/endstops.h

@@ -47,26 +47,16 @@ enum EndstopEnum : char {
   _ES_ITEM(HAS_K_MAX, K_MAX)
 
   // Extra Endstops for XYZ
-  #if ENABLED(X_DUAL_ENDSTOPS)
-    _ES_ITEM(HAS_X_MIN, X2_MIN)
-    _ES_ITEM(HAS_X_MAX, X2_MAX)
-  #endif
-  #if ENABLED(Y_DUAL_ENDSTOPS)
-    _ES_ITEM(HAS_Y_MIN, Y2_MIN)
-    _ES_ITEM(HAS_Y_MAX, Y2_MAX)
-  #endif
-  #if ENABLED(Z_MULTI_ENDSTOPS)
-    _ES_ITEM(HAS_Z_MIN, Z2_MIN)
-    _ES_ITEM(HAS_Z_MAX, Z2_MAX)
-    #if NUM_Z_STEPPER_DRIVERS >= 3
-      _ES_ITEM(HAS_Z_MIN, Z3_MIN)
-      _ES_ITEM(HAS_Z_MAX, Z3_MAX)
-    #endif
-    #if NUM_Z_STEPPER_DRIVERS >= 4
-      _ES_ITEM(HAS_Z_MIN, Z4_MIN)
-      _ES_ITEM(HAS_Z_MAX, Z4_MAX)
-    #endif
-  #endif
+  _ES_ITEM(HAS_X2_MIN, X2_MIN)
+  _ES_ITEM(HAS_X2_MAX, X2_MAX)
+  _ES_ITEM(HAS_Y2_MIN, Y2_MIN)
+  _ES_ITEM(HAS_Y2_MAX, Y2_MAX)
+  _ES_ITEM(HAS_Z2_MIN, Z2_MIN)
+  _ES_ITEM(HAS_Z2_MAX, Z2_MAX)
+  _ES_ITEM(HAS_Z3_MIN, Z3_MIN)
+  _ES_ITEM(HAS_Z3_MAX, Z3_MAX)
+  _ES_ITEM(HAS_Z4_MIN, Z4_MIN)
+  _ES_ITEM(HAS_Z4_MAX, Z4_MAX)
 
   // Bed Probe state is distinct or shared with Z_MIN (i.e., when the probe is the only Z endstop)
   _ES_ITEM(HAS_BED_PROBE, Z_MIN_PROBE IF_DISABLED(USES_Z_MIN_PROBE_PIN, = Z_MIN))

buildroot/tests/teensy35

@@ -101,7 +101,7 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXZ | BACKLASH" "$3"
 # Enable Dual Z with Dual Z endstops
 #
 restore_configs
-opt_set MOTHERBOARD BOARD_TEENSY35_36 NUM_Z_STEPPER_DRIVERS 2 Z2_MAX_PIN 2
+opt_set MOTHERBOARD BOARD_TEENSY35_36 NUM_Z_STEPPER_DRIVERS 2 Z2_MIN_PIN 2
 opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
 pins_set ramps/RAMPS X_MAX_PIN -1
 exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"

buildroot/tests/teensy41

@@ -104,7 +104,7 @@ exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3"
 # Enable Dual Z with Dual Z endstops
 #
 restore_configs
-opt_set MOTHERBOARD BOARD_TEENSY41 NUM_Z_STEPPER_DRIVERS 2 Z2_MAX_PIN 2
+opt_set MOTHERBOARD BOARD_TEENSY41 NUM_Z_STEPPER_DRIVERS 2 Z2_MIN_PIN 2
 opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
 pins_set ramps/RAMPS X_MAX_PIN -1
 exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"