Add Zonestar/Anet LCD for SKR mini E3 (#15931)
This commit is contained in:
Daniel Negut
Scott Lahteine
parent
798f34abcd
commit
a3229b30ec
@ -121,6 +121,9 @@ const uint8_t adc_pins[] = {
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
||||
FILWIDTH_PIN,
|
||||
#endif
|
||||
#if ENABLED(ADC_KEYPAD)
|
||||
ADC_KEYPAD_PIN,
|
||||
#endif
|
||||
#if HAS_JOY_ADC_X
|
||||
JOY_X_PIN,
|
||||
#endif
|
||||
@ -160,6 +163,9 @@ enum TEMP_PINS : char {
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
||||
FILWIDTH,
|
||||
#endif
|
||||
#if ENABLED(ADC_KEYPAD)
|
||||
ADC_KEY,
|
||||
#endif
|
||||
#if HAS_JOY_ADC_X
|
||||
JOY_X,
|
||||
#endif
|
||||
@ -352,6 +358,9 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
||||
case FILWIDTH_PIN: pin_index = FILWIDTH; break;
|
||||
#endif
|
||||
#if ENABLED(ADC_KEYPAD)
|
||||
case ADC_KEYPAD_PIN: pin_index = ADC_KEY; break;
|
||||
#endif
|
||||
}
|
||||
HAL_adc_result = (HAL_adc_results[(int)pin_index] >> 2) & 0x3FF; // shift to get 10 bits only.
|
||||
}
|
||||
|
||||
@ -70,7 +70,7 @@ typedef uint16_t hal_timer_t;
|
||||
//#define TEMP_TIMER_NUM 4 // 2->4, Timer 2 for Stepper Current PWM
|
||||
#define PULSE_TIMER_NUM STEP_TIMER_NUM
|
||||
|
||||
#if MB(BIGTREE_SKR_MINI_E3, BIGTREE_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE)
|
||||
#if MB(BTT_SKR_MINI_E3_V1_0, BIGTREE_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE)
|
||||
// SKR Mini E3 boards use PA8 as FAN_PIN, so TIMER 1 is used for Fan PWM.
|
||||
#ifdef STM32_HIGH_DENSITY
|
||||
#define SERVO0_TIMER_NUM 8 // tone.cpp uses Timer 4
|
||||
|
||||
@ -270,9 +270,9 @@
|
||||
#define BOARD_MKS_ROBIN_NANO 4008 // MKS Robin Nano (STM32F103VET6)
|
||||
#define BOARD_MKS_ROBIN_LITE 4009 // MKS Robin Lite/Lite2 (STM32F103RCT6)
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 4010 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
|
||||
#define BOARD_BIGTREE_SKR_MINI_E3 4011 // BigTreeTech SKR Mini E3 (STM32F103RC)
|
||||
#define BOARD_BIGTREE_SKR_E3_DIP 4012 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_2 4013 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_0 4011 // BigTreeTech SKR Mini E3 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_2 4012 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
|
||||
#define BOARD_BIGTREE_SKR_E3_DIP 4013 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC)
|
||||
#define BOARD_JGAURORA_A5S_A1 4014 // JGAurora A5S A1 (STM32F103ZET6)
|
||||
#define BOARD_FYSETC_AIO_II 4015 // FYSETC AIO_II
|
||||
#define BOARD_FYSETC_CHEETAH 4016 // FYSETC Cheetah
|
||||
|
||||
@ -420,6 +420,7 @@
|
||||
#define BOARD_STM32F1R -1005
|
||||
#define BOARD_STM32F103R -1006
|
||||
#define BOARD_ESP32 -1007
|
||||
#define BOARD_BIGTREE_SKR_MINI_E3 -1008
|
||||
#if MB(MKS_13)
|
||||
#error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
|
||||
#elif MB(TRIGORILLA)
|
||||
@ -436,6 +437,8 @@
|
||||
#error "BOARD_STM32F103R has been renamed BOARD_STM32F103RE. Please update your configuration."
|
||||
#elif MOTHERBOARD == BOARD_ESP32
|
||||
#error "BOARD_ESP32 has been renamed BOARD_ESPRESSIF_ESP32. Please update your configuration."
|
||||
#elif MOTHERBOARD == BOARD_BIGTREE_SKR_MINI_E3
|
||||
#error "BOARD_BIGTREE_SKR_MINI_E3 has been renamed BOARD_BTT_SKR_MINI_E3_V1_0. Please update your configuration."
|
||||
#endif
|
||||
#undef BOARD_MKS_13
|
||||
#undef BOARD_TRIGORILLA
|
||||
@ -445,6 +448,7 @@
|
||||
#undef BOARD_STM32F1R
|
||||
#undef BOARD_STM32F103R
|
||||
#undef BOARD_ESP32
|
||||
#undef BOARD_BIGTREE_SKR_MINI_E3
|
||||
|
||||
/**
|
||||
* Marlin release, version and default string
|
||||
|
||||
104
Marlin/src/pins/lpc1768/pins_BTT_SKR.h
Normal file
104
Marlin/src/pins/lpc1768/pins_BTT_SKR.h
Normal file
@ -0,0 +1,104 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef MCU_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
#endif
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN P1_29
|
||||
#define X_MAX_PIN P1_28
|
||||
#define Y_MIN_PIN P1_27
|
||||
#define Y_MAX_PIN P1_26
|
||||
#define Z_MIN_PIN P1_25
|
||||
#define Z_MAX_PIN P1_24
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
|
||||
#define E1_STEP_PIN P0_01
|
||||
#define E1_DIR_PIN P0_00
|
||||
#define E1_ENABLE_PIN P0_10
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN
|
||||
#define TEMP_0_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_0_PIN
|
||||
#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#ifndef HEATER_0_PIN
|
||||
#define HEATER_0_PIN P2_07
|
||||
#endif
|
||||
#if HOTENDS == 1
|
||||
#ifndef FAN1_PIN
|
||||
#define FAN1_PIN P2_04
|
||||
#endif
|
||||
#else
|
||||
#ifndef HEATER_1_PIN
|
||||
#define HEATER_1_PIN P2_04
|
||||
#endif
|
||||
#endif
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN P2_03
|
||||
#endif
|
||||
#ifndef HEATER_BED_PIN
|
||||
#define HEATER_BED_PIN P2_05
|
||||
#endif
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||||
#endif
|
||||
|
||||
//
|
||||
// SD Support
|
||||
//
|
||||
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
|
||||
|
||||
#if SD_CONNECTION_IS(LCD)
|
||||
#define SCK_PIN P0_15
|
||||
#define MISO_PIN P0_17
|
||||
#define MOSI_PIN P0_18
|
||||
#elif SD_CONNECTION_IS(ONBOARD)
|
||||
#undef SD_DETECT_PIN
|
||||
#define SD_DETECT_PIN P0_27
|
||||
#define SCK_PIN P0_07
|
||||
#define MISO_PIN P0_08
|
||||
#define MOSI_PIN P0_09
|
||||
#define SS_PIN ONBOARD_SD_CS_PIN
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "No custom SD drive cable defined for this board."
|
||||
#endif
|
||||
@ -21,22 +21,8 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef MCU_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "BIGTREE SKR 1.1"
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN P1_29
|
||||
#define X_MAX_PIN P1_28
|
||||
#define Y_MIN_PIN P1_27
|
||||
#define Y_MAX_PIN P1_26
|
||||
#define Z_MIN_PIN P1_25
|
||||
#define Z_MAX_PIN P1_24
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
@ -56,30 +42,6 @@
|
||||
#define E0_DIR_PIN P2_13
|
||||
#define E0_ENABLE_PIN P2_12
|
||||
|
||||
#define E1_STEP_PIN P0_01
|
||||
#define E1_DIR_PIN P0_00
|
||||
#define E1_ENABLE_PIN P0_10
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_BED_PIN P0_23_A0 // Analog Input
|
||||
#define TEMP_0_PIN P0_24_A1 // Analog Input
|
||||
#define TEMP_1_PIN P0_25_A2 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN P2_07
|
||||
#if HOTENDS == 1
|
||||
#define FAN1_PIN P2_04
|
||||
#else
|
||||
#define HEATER_1_PIN P2_04
|
||||
#endif
|
||||
#define FAN_PIN P2_03
|
||||
#define HEATER_BED_PIN P2_05
|
||||
|
||||
/**
|
||||
* LCD / Controller
|
||||
*
|
||||
@ -94,7 +56,6 @@
|
||||
*/
|
||||
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN P1_30
|
||||
#define BTN_EN1 P3_26
|
||||
#define BTN_EN2 P3_25
|
||||
#define BTN_ENC P2_11
|
||||
@ -125,22 +86,8 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
|
||||
|
||||
#if SD_CONNECTION_IS(LCD)
|
||||
#define SCK_PIN P0_15
|
||||
#define MISO_PIN P0_17
|
||||
#define MOSI_PIN P0_18
|
||||
#define SS_PIN P1_23
|
||||
#elif SD_CONNECTION_IS(ONBOARD)
|
||||
#undef SD_DETECT_PIN
|
||||
#define SD_DETECT_PIN P0_27
|
||||
#define SCK_PIN P0_07
|
||||
#define MISO_PIN P0_08
|
||||
#define MOSI_PIN P0_09
|
||||
#define SS_PIN ONBOARD_SD_CS_PIN
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "No custom SD drive cable defined for this board."
|
||||
#endif
|
||||
|
||||
// Trinamic driver support
|
||||
@ -270,3 +217,6 @@
|
||||
#endif // SOFTWARE_DRIVER_ENABLE
|
||||
|
||||
#endif
|
||||
|
||||
// Include common SKR pins
|
||||
#include "pins_BTT_SKR.h"
|
||||
@ -21,15 +21,8 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef MCU_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "BIGTREE SKR 1.3"
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
@ -37,16 +30,6 @@
|
||||
#define SERVO0_PIN P2_00
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN P1_29
|
||||
#define X_MAX_PIN P1_28
|
||||
#define Y_MIN_PIN P1_27
|
||||
#define Y_MAX_PIN P1_26
|
||||
#define Z_MIN_PIN P1_25
|
||||
#define Z_MAX_PIN P1_24
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
@ -92,9 +75,6 @@
|
||||
#define E0_CS_PIN P1_08
|
||||
#endif
|
||||
|
||||
#define E1_STEP_PIN P0_01
|
||||
#define E1_DIR_PIN P0_00
|
||||
#define E1_ENABLE_PIN P0_10
|
||||
#ifndef E1_CS_PIN
|
||||
#define E1_CS_PIN P1_01
|
||||
#endif
|
||||
@ -158,36 +138,6 @@
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN
|
||||
#define TEMP_0_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_0_PIN
|
||||
#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#ifndef HEATER_0_PIN
|
||||
#define HEATER_0_PIN P2_07
|
||||
#endif
|
||||
#if HOTENDS == 1
|
||||
#ifndef FAN1_PIN
|
||||
#define FAN1_PIN P2_04
|
||||
#endif
|
||||
#else
|
||||
#ifndef HEATER_1_PIN
|
||||
#define HEATER_1_PIN P2_04
|
||||
#endif
|
||||
#endif
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN P2_03
|
||||
#endif
|
||||
#ifndef HEATER_BED_PIN
|
||||
#define HEATER_BED_PIN P2_05
|
||||
#endif
|
||||
|
||||
/**
|
||||
* _____ _____
|
||||
* NC | · · | GND 5V | · · | GND
|
||||
@ -199,7 +149,6 @@
|
||||
* EXP2 EXP1
|
||||
*/
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||||
#define BTN_ENC P0_28 // (58) open-drain
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
@ -280,22 +229,8 @@
|
||||
#define SDCARD_CONNECTION LCD
|
||||
#endif
|
||||
|
||||
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
|
||||
|
||||
#if SD_CONNECTION_IS(LCD)
|
||||
#define SCK_PIN P0_15
|
||||
#define MISO_PIN P0_17
|
||||
#define MOSI_PIN P0_18
|
||||
#define SS_PIN P0_16
|
||||
#elif SD_CONNECTION_IS(ONBOARD)
|
||||
#undef SD_DETECT_PIN
|
||||
#define SD_DETECT_PIN P0_27
|
||||
#define SCK_PIN P0_07
|
||||
#define MISO_PIN P0_08
|
||||
#define MOSI_PIN P0_09
|
||||
#define SS_PIN ONBOARD_SD_CS_PIN
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "No custom SD drive cable defined for this board."
|
||||
#endif
|
||||
|
||||
/**
|
||||
@ -305,3 +240,6 @@
|
||||
* P0_27 (57) (Open collector)
|
||||
* P0_28 (58) (Open collector)
|
||||
*/
|
||||
|
||||
// Include common SKR pins
|
||||
#include "pins_BTT_SKR.h"
|
||||
@ -355,11 +355,11 @@
|
||||
#elif MB(SELENA_COMPACT)
|
||||
#include "lpc1768/pins_SELENA_COMPACT.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIGTREE_SKR_V1_1)
|
||||
#include "lpc1768/pins_BIGTREE_SKR_V1.1.h" // LPC1768 env:LPC1768
|
||||
#include "lpc1768/pins_BTT_SKR_V1_1.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIQU_B300_V1_0)
|
||||
#include "lpc1768/pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIGTREE_SKR_V1_3)
|
||||
#include "lpc1768/pins_BIGTREE_SKR_V1.3.h" // LPC1768 env:LPC1768
|
||||
#include "lpc1768/pins_BTT_SKR_V1_3.h" // LPC1768 env:LPC1768
|
||||
#elif MB(GMARSH_X6_REV1)
|
||||
#include "lpc1768/pins_GMARSH_X6_REV1.h" // LPC1768 env:LPC1768
|
||||
|
||||
@ -470,13 +470,13 @@
|
||||
#elif MB(MKS_ROBIN_LITE)
|
||||
#include "stm32/pins_MKS_ROBIN_LITE.h" // STM32F1 env:mks_robin_lite
|
||||
#elif MB(BIGTREE_SKR_MINI_V1_1)
|
||||
#include "stm32/pins_BIGTREE_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_NOUSB env:STM32F103RC_bigtree_512K_NOUSB
|
||||
#include "stm32/pins_BTT_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_NOUSB env:STM32F103RC_bigtree_512K_NOUSB
|
||||
#elif MB(BTT_SKR_MINI_E3_V1_0)
|
||||
#include "stm32/pins_BTT_SKR_MINI_E3_V1_0.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_NOUSB env:STM32F103RC_bigtree_512K_NOUSB
|
||||
#elif MB(BTT_SKR_MINI_E3_V1_2)
|
||||
#include "stm32/pins_BTT_SKR_MINI_E3_V1_2.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_NOUSB env:STM32F103RC_bigtree_512K_NOUSB
|
||||
#elif MB(BIGTREE_SKR_MINI_E3)
|
||||
#include "stm32/pins_BIGTREE_SKR_MINI_E3.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_NOUSB env:STM32F103RC_bigtree_512K_NOUSB
|
||||
#elif MB(BIGTREE_SKR_E3_DIP)
|
||||
#include "stm32/pins_BIGTREE_SKR_E3_DIP.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_NOUSB env:STM32F103RC_bigtree_512K_NOUSB
|
||||
#include "stm32/pins_BTT_SKR_E3_DIP.h" // STM32F1 env:STM32F103RC_bigtree env:STM32F103RC_bigtree_512K env:STM32F103RC_bigtree_NOUSB env:STM32F103RC_bigtree_512K_NOUSB
|
||||
#elif MB(JGAURORA_A5S_A1)
|
||||
#include "stm32/pins_JGAURORA_A5S_A1.h" // STM32F1 env:jgaurora_a5s_a1
|
||||
#elif MB(FYSETC_AIO_II)
|
||||
@ -514,9 +514,9 @@
|
||||
#elif MB(STEVAL)
|
||||
#include "stm32/pins_STEVAL.h" // STM32F4 env:STM32F4
|
||||
#elif MB(BIGTREE_SKR_PRO_V1_1)
|
||||
#include "stm32/pins_BIGTREE_SKR_PRO_V1.1.h" // STM32F4 env:BIGTREE_SKR_PRO
|
||||
#include "stm32/pins_BTT_SKR_PRO_V1_1.h" // STM32F4 env:BIGTREE_SKR_PRO
|
||||
#elif MB(BIGTREE_BTT002_V1_0)
|
||||
#include "stm32/pins_BIGTREE_BTT002_V1.0.h" // STM32F4 env:BIGTREE_BTT002
|
||||
#include "stm32/pins_BTT_BTT002_V1_0.h" // STM32F4 env:BIGTREE_BTT002
|
||||
#elif MB(LERDGE_K)
|
||||
#include "stm32/pins_LERDGE_K.h" // STM32F4 env:STM32F4
|
||||
#elif MB(LERDGE_X)
|
||||
|
||||
@ -25,8 +25,6 @@
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "BIGTREE SKR Mini E3"
|
||||
|
||||
// Release PB3/PB4 (E0 STP/DIR) from JTAG pins
|
||||
#define DISABLE_JTAG
|
||||
|
||||
@ -60,7 +58,7 @@
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC15
|
||||
#define FIL_RUNOUT_PIN PC15 // "E0-STOP"
|
||||
#endif
|
||||
|
||||
//
|
||||
@ -82,17 +80,6 @@
|
||||
#define E0_STEP_PIN PB3
|
||||
#define E0_DIR_PIN PB4
|
||||
|
||||
#if HAS_DRIVER(TMC2209)
|
||||
/**
|
||||
* TMC2209 stepper drivers
|
||||
* Hardware serial communication ports.
|
||||
*/
|
||||
#define X_HARDWARE_SERIAL Serial4
|
||||
#define Y_HARDWARE_SERIAL Serial4
|
||||
#define Z_HARDWARE_SERIAL Serial4
|
||||
#define E0_HARDWARE_SERIAL Serial4
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
@ -125,10 +112,12 @@
|
||||
* EXP1
|
||||
*/
|
||||
#if HAS_SPI_LCD
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
#define BEEPER_PIN PB5
|
||||
#define BTN_ENC PB6
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define LCD_PINS_RS PB8
|
||||
|
||||
#define BTN_EN1 PA9
|
||||
@ -137,6 +126,16 @@
|
||||
#define LCD_PINS_ENABLE PB7
|
||||
#define LCD_PINS_D4 PB9
|
||||
|
||||
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||
|
||||
#define LCD_PINS_RS PB9
|
||||
#define LCD_PINS_ENABLE PB6
|
||||
#define LCD_PINS_D4 PB8
|
||||
#define LCD_PINS_D5 PA10
|
||||
#define LCD_PINS_D6 PA9
|
||||
#define LCD_PINS_D7 PB5
|
||||
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||
|
||||
#elif ENABLED(MKS_MINI_12864)
|
||||
|
||||
/** Creality Ender-2 display pinout
|
||||
@ -149,7 +148,6 @@
|
||||
* -----
|
||||
* EXP1
|
||||
*/
|
||||
|
||||
#define BTN_EN1 PA9
|
||||
#define BTN_EN2 PA10
|
||||
#define DOGLCD_CS PB8
|
||||
@ -160,7 +158,9 @@
|
||||
#define LCD_BACKLIGHT_PIN -1
|
||||
|
||||
#else
|
||||
#error "Only CR10_STOCKDISPLAY and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3."
|
||||
|
||||
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3."
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
37
Marlin/src/pins/stm32/pins_BTT_SKR_MINI_E3_V1_0.h
Normal file
37
Marlin/src/pins/stm32/pins_BTT_SKR_MINI_E3_V1_0.h
Normal file
@ -0,0 +1,37 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "pins_BTT_SKR_MINI_E3.h"
|
||||
|
||||
#define BOARD_INFO_NAME "BIGTREE SKR Mini E3"
|
||||
|
||||
/**
|
||||
* TMC2209 stepper drivers
|
||||
* Hardware serial communication ports.
|
||||
*/
|
||||
#if HAS_DRIVER(TMC2209)
|
||||
#define X_HARDWARE_SERIAL Serial4
|
||||
#define Y_HARDWARE_SERIAL Serial4
|
||||
#define Z_HARDWARE_SERIAL Serial4
|
||||
#define E0_HARDWARE_SERIAL Serial4
|
||||
#endif
|
||||
@ -21,71 +21,16 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef TARGET_STM32F1
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
#include "pins_BTT_SKR_MINI_E3.h"
|
||||
|
||||
#define BOARD_INFO_NAME "BIGTREE SKR Mini E3 V1.2"
|
||||
|
||||
// Release PB3/PB4 (E0 STP/DIR) from JTAG pins
|
||||
#define DISABLE_JTAG
|
||||
#define NEOPIXEL_PIN PC7 // LED driving pin
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE uint16(0x800) // 2KB
|
||||
#define EEPROM_START_ADDRESS uint32(0x8000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE)
|
||||
#undef E2END
|
||||
#define E2END (EEPROM_PAGE_SIZE - 1) // 2KB
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC0
|
||||
#define Y_STOP_PIN PC1
|
||||
#define Z_STOP_PIN PC2
|
||||
|
||||
//
|
||||
// Z Probe must be this pins
|
||||
//
|
||||
#define Z_MIN_PROBE_PIN PC14
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC15 // "E0-STOP"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PB14
|
||||
#define X_STEP_PIN PB13
|
||||
#define X_DIR_PIN PB12
|
||||
|
||||
#define Y_ENABLE_PIN PB11
|
||||
#define Y_STEP_PIN PB10
|
||||
#define Y_DIR_PIN PB2
|
||||
|
||||
#define Z_ENABLE_PIN PB1
|
||||
#define Z_STEP_PIN PB0
|
||||
#define Z_DIR_PIN PC5
|
||||
|
||||
#define E0_ENABLE_PIN PD2
|
||||
#define E0_STEP_PIN PB3
|
||||
#define E0_DIR_PIN PB4
|
||||
|
||||
#if HAS_TMC220x
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*/
|
||||
#if HAS_TMC220x
|
||||
//
|
||||
// Software serial
|
||||
//
|
||||
@ -104,67 +49,3 @@
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PA0 // Analog Input
|
||||
#define TEMP_BED_PIN PC3 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC8 // EXTRUDER
|
||||
#define HEATER_BED_PIN PC9 // BED
|
||||
#define FAN_PIN PA8
|
||||
|
||||
//
|
||||
// USB connect control
|
||||
//
|
||||
#define USB_CONNECT_PIN PC13
|
||||
#define USB_CONNECT_INVERTING false
|
||||
|
||||
#define NEOPIXEL_PIN PC7 // LED driving pin
|
||||
|
||||
#define SD_DETECT_PIN PC4
|
||||
|
||||
/**
|
||||
* _____
|
||||
* 5V | · · | GND
|
||||
* (LCD_EN) PB7 | · · | PB8 (LCD_RS)
|
||||
* (LCD_D4) PB9 | · · | PA10 (BTN_EN2)
|
||||
* RESET | · · | PA9 (BTN_EN1)
|
||||
* (BTN_ENC) PB6 | · · | PB5 (BEEPER)
|
||||
* -----
|
||||
* EXP1
|
||||
*/
|
||||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN PB5
|
||||
#define BTN_ENC PB6
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define LCD_PINS_RS PB8
|
||||
|
||||
#define BTN_EN1 PA9
|
||||
#define BTN_EN2 PA10
|
||||
|
||||
#define LCD_PINS_ENABLE PB7
|
||||
#define LCD_PINS_D4 PB9
|
||||
|
||||
#else
|
||||
#error "Only CR10_STOCKDISPLAY is currently supported on the BIGTREE_SKR_MINI_E3 V1.2."
|
||||
#endif
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
|
||||
//
|
||||
// SD Support
|
||||
//
|
||||
#define HAS_ONBOARD_SD
|
||||
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#define ON_BOARD_SPI_DEVICE 1 //SPI1
|
||||
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
||||
|
||||
@ -10,7 +10,7 @@ set -e
|
||||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_MINI_E3
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "Bigtreetech SKR Mini E3 - Basic Configuration"
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user