From 9ead6a30f2876700413802d2d1445b9a33f05838 Mon Sep 17 00:00:00 2001 From: Victor Oliveira Date: Tue, 8 Dec 2020 02:26:39 -0300 Subject: [PATCH] SPI TFT for STM32F4 boards (#20384) * fix pinsDebug for F1 boards * add MKS Robin PRO V2 board - development board * tft spi working with F4 boards * pins formating * sanity check for TFT on supported cores in STM32 * Fix tabs/spaces in pins file Co-authored-by: Jason Smith --- Marlin/src/HAL/STM32/inc/SanityCheck.h | 4 + Marlin/src/HAL/STM32/pinsDebug.h | 143 +++---- Marlin/src/HAL/STM32/tft/tft_spi.cpp | 108 +++-- Marlin/src/core/boards.h | 1 + Marlin/src/pins/pins.h | 2 + .../src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h | 381 ++++++++++++++++++ platformio.ini | 20 + 7 files changed, 540 insertions(+), 119 deletions(-) create mode 100644 Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h diff --git a/Marlin/src/HAL/STM32/inc/SanityCheck.h b/Marlin/src/HAL/STM32/inc/SanityCheck.h index c51fecc7bd..64632475fd 100644 --- a/Marlin/src/HAL/STM32/inc/SanityCheck.h +++ b/Marlin/src/HAL/STM32/inc/SanityCheck.h @@ -51,3 +51,7 @@ #elif ENABLED(SERIAL_STATS_DROPPED_RX) #error "SERIAL_STATS_DROPPED_RX is not supported on this platform." #endif + +#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx) + #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_U are currently only supported on STM32F4 and STM32F1 hardware." +#endif diff --git a/Marlin/src/HAL/STM32/pinsDebug.h b/Marlin/src/HAL/STM32/pinsDebug.h index 77c93ee41e..64ee2b03db 100644 --- a/Marlin/src/HAL/STM32/pinsDebug.h +++ b/Marlin/src/HAL/STM32/pinsDebug.h @@ -137,32 +137,19 @@ const XrefInfo pin_xref[] PROGMEM = { #endif uint8_t get_pin_mode(const pin_t Ard_num) { - uint32_t mode_all = 0; const PinName dp = digitalPinToPinName(Ard_num); - switch (PORT_ALPHA(dp)) { - case 'A' : mode_all = GPIOA->MODER; break; - case 'B' : mode_all = GPIOB->MODER; break; - case 'C' : mode_all = GPIOC->MODER; break; - case 'D' : mode_all = GPIOD->MODER; break; - #ifdef PE_0 - case 'E' : mode_all = GPIOE->MODER; break; - #elif defined(PF_0) - case 'F' : mode_all = GPIOF->MODER; break; - #elif defined(PG_0) - case 'G' : mode_all = GPIOG->MODER; break; - #elif defined(PH_0) - case 'H' : mode_all = GPIOH->MODER; break; - #elif defined(PI_0) - case 'I' : mode_all = GPIOI->MODER; break; - #elif defined(PJ_0) - case 'J' : mode_all = GPIOJ->MODER; break; - #elif defined(PK_0) - case 'K' : mode_all = GPIOK->MODER; break; - #elif defined(PL_0) - case 'L' : mode_all = GPIOL->MODER; break; - #endif + uint32_t ll_pin = STM_LL_GPIO_PIN(dp); + GPIO_TypeDef *port = get_GPIO_Port(STM_PORT(dp)); + uint32_t mode = LL_GPIO_GetPinMode(port, ll_pin); + switch (mode) + { + case LL_GPIO_MODE_ANALOG: return MODE_PIN_ANALOG; + case LL_GPIO_MODE_INPUT: return MODE_PIN_INPUT; + case LL_GPIO_MODE_OUTPUT: return MODE_PIN_OUTPUT; + case LL_GPIO_MODE_ALTERNATE: return MODE_PIN_ALT; + TERN_(STM32F1xx, case LL_GPIO_MODE_FLOATING:) + default: return 0; } - return (mode_all >> (2 * uint8_t(PIN_NUM(dp)))) & 0x03; } bool GET_PINMODE(const pin_t Ard_num) { @@ -217,58 +204,62 @@ bool pwm_status(const pin_t Ard_num) { } void pwm_details(const pin_t Ard_num) { - if (pwm_status(Ard_num)) { - uint32_t alt_all = 0; - const PinName dp = digitalPinToPinName(Ard_num); - pin_t pin_number = uint8_t(PIN_NUM(dp)); - const bool over_7 = pin_number >= 8; - const uint8_t ind = over_7 ? 1 : 0; - switch (PORT_ALPHA(dp)) { // get alt function - case 'A' : alt_all = GPIOA->AFR[ind]; break; - case 'B' : alt_all = GPIOB->AFR[ind]; break; - case 'C' : alt_all = GPIOC->AFR[ind]; break; - case 'D' : alt_all = GPIOD->AFR[ind]; break; - #ifdef PE_0 - case 'E' : alt_all = GPIOE->AFR[ind]; break; - #elif defined (PF_0) - case 'F' : alt_all = GPIOF->AFR[ind]; break; - #elif defined (PG_0) - case 'G' : alt_all = GPIOG->AFR[ind]; break; - #elif defined (PH_0) - case 'H' : alt_all = GPIOH->AFR[ind]; break; - #elif defined (PI_0) - case 'I' : alt_all = GPIOI->AFR[ind]; break; - #elif defined (PJ_0) - case 'J' : alt_all = GPIOJ->AFR[ind]; break; - #elif defined (PK_0) - case 'K' : alt_all = GPIOK->AFR[ind]; break; - #elif defined (PL_0) - case 'L' : alt_all = GPIOL->AFR[ind]; break; - #endif - } - if (over_7) pin_number -= 8; + #ifndef STM32F1xx + if (pwm_status(Ard_num)) { + uint32_t alt_all = 0; + const PinName dp = digitalPinToPinName(Ard_num); + pin_t pin_number = uint8_t(PIN_NUM(dp)); + const bool over_7 = pin_number >= 8; + const uint8_t ind = over_7 ? 1 : 0; + switch (PORT_ALPHA(dp)) { // get alt function + case 'A' : alt_all = GPIOA->AFR[ind]; break; + case 'B' : alt_all = GPIOB->AFR[ind]; break; + case 'C' : alt_all = GPIOC->AFR[ind]; break; + case 'D' : alt_all = GPIOD->AFR[ind]; break; + #ifdef PE_0 + case 'E' : alt_all = GPIOE->AFR[ind]; break; + #elif defined (PF_0) + case 'F' : alt_all = GPIOF->AFR[ind]; break; + #elif defined (PG_0) + case 'G' : alt_all = GPIOG->AFR[ind]; break; + #elif defined (PH_0) + case 'H' : alt_all = GPIOH->AFR[ind]; break; + #elif defined (PI_0) + case 'I' : alt_all = GPIOI->AFR[ind]; break; + #elif defined (PJ_0) + case 'J' : alt_all = GPIOJ->AFR[ind]; break; + #elif defined (PK_0) + case 'K' : alt_all = GPIOK->AFR[ind]; break; + #elif defined (PL_0) + case 'L' : alt_all = GPIOL->AFR[ind]; break; + #endif + } + if (over_7) pin_number -= 8; - uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F; - SERIAL_ECHOPAIR("Alt Function: ", alt_func); - if (alt_func < 10) SERIAL_CHAR(' '); - SERIAL_ECHOPGM(" - "); - switch (alt_func) { - case 0 : SERIAL_ECHOPGM("system (misc. I/O)"); break; - case 1 : SERIAL_ECHOPGM("TIM1/TIM2 (probably PWM)"); break; - case 2 : SERIAL_ECHOPGM("TIM3..5 (probably PWM)"); break; - case 3 : SERIAL_ECHOPGM("TIM8..11 (probably PWM)"); break; - case 4 : SERIAL_ECHOPGM("I2C1..3"); break; - case 5 : SERIAL_ECHOPGM("SPI1/SPI2"); break; - case 6 : SERIAL_ECHOPGM("SPI3"); break; - case 7 : SERIAL_ECHOPGM("USART1..3"); break; - case 8 : SERIAL_ECHOPGM("USART4..6"); break; - case 9 : SERIAL_ECHOPGM("CAN1/CAN2, TIM12..14 (probably PWM)"); break; - case 10 : SERIAL_ECHOPGM("OTG"); break; - case 11 : SERIAL_ECHOPGM("ETH"); break; - case 12 : SERIAL_ECHOPGM("FSMC, SDIO, OTG"); break; - case 13 : SERIAL_ECHOPGM("DCMI"); break; - case 14 : SERIAL_ECHOPGM("unused (shouldn't see this)"); break; - case 15 : SERIAL_ECHOPGM("EVENTOUT"); break; + uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F; + SERIAL_ECHOPAIR("Alt Function: ", alt_func); + if (alt_func < 10) SERIAL_CHAR(' '); + SERIAL_ECHOPGM(" - "); + switch (alt_func) { + case 0 : SERIAL_ECHOPGM("system (misc. I/O)"); break; + case 1 : SERIAL_ECHOPGM("TIM1/TIM2 (probably PWM)"); break; + case 2 : SERIAL_ECHOPGM("TIM3..5 (probably PWM)"); break; + case 3 : SERIAL_ECHOPGM("TIM8..11 (probably PWM)"); break; + case 4 : SERIAL_ECHOPGM("I2C1..3"); break; + case 5 : SERIAL_ECHOPGM("SPI1/SPI2"); break; + case 6 : SERIAL_ECHOPGM("SPI3"); break; + case 7 : SERIAL_ECHOPGM("USART1..3"); break; + case 8 : SERIAL_ECHOPGM("USART4..6"); break; + case 9 : SERIAL_ECHOPGM("CAN1/CAN2, TIM12..14 (probably PWM)"); break; + case 10 : SERIAL_ECHOPGM("OTG"); break; + case 11 : SERIAL_ECHOPGM("ETH"); break; + case 12 : SERIAL_ECHOPGM("FSMC, SDIO, OTG"); break; + case 13 : SERIAL_ECHOPGM("DCMI"); break; + case 14 : SERIAL_ECHOPGM("unused (shouldn't see this)"); break; + case 15 : SERIAL_ECHOPGM("EVENTOUT"); break; + } } - } + #else + // TODO: F1 doesn't support changing pins function, so we need to check the function of the PIN and if it's enabled + #endif } // pwm_details diff --git a/Marlin/src/HAL/STM32/tft/tft_spi.cpp b/Marlin/src/HAL/STM32/tft/tft_spi.cpp index aed15ad66d..d64ebcfe4b 100644 --- a/Marlin/src/HAL/STM32/tft/tft_spi.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_spi.cpp @@ -34,35 +34,25 @@ DMA_HandleTypeDef TFT_SPI::DMAtx; void TFT_SPI::Init() { SPI_TypeDef *spiInstance; - #if PIN_EXISTS(TFT_RESET) - OUT_WRITE(TFT_RESET_PIN, HIGH); - HAL_Delay(100); - #endif - - #if PIN_EXISTS(TFT_BACKLIGHT) - OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH); - #endif - OUT_WRITE(TFT_A0_PIN, HIGH); OUT_WRITE(TFT_CS_PIN, HIGH); if ((spiInstance = (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK)) == NP) return; if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI)) return; - #if PIN_EXISTS(TFT_MISO) && (TFT_MISO_PIN != TFT_MOSI_PIN) - if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return; + #if PIN_EXISTS(TFT_MISO) + if (TFT_MISO_PIN != TFT_MOSI_PIN) + if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return; #endif SPIx.Instance = spiInstance; SPIx.State = HAL_SPI_STATE_RESET; SPIx.Init.NSS = SPI_NSS_SOFT; SPIx.Init.Mode = SPI_MODE_MASTER; - SPIx.Init.Direction = - #if TFT_MISO_PIN == TFT_MOSI_PIN - SPI_DIRECTION_1LINE; - #else - SPI_DIRECTION_2LINES; - #endif + if (TFT_MISO_PIN == TFT_MOSI_PIN) + SPIx.Init.Direction = SPI_DIRECTION_1LINE; + else + SPIx.Init.Direction = SPI_DIRECTION_2LINES; SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; SPIx.Init.CLKPhase = SPI_PHASE_1EDGE; SPIx.Init.CLKPolarity = SPI_POLARITY_LOW; @@ -74,31 +64,50 @@ void TFT_SPI::Init() { pinmap_pinout(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK); pinmap_pinout(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI); - #if PIN_EXISTS(TFT_MISO) && (TFT_MISO_PIN != TFT_MOSI_PIN) - pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO); + #if PIN_EXISTS(TFT_MISO) + if (TFT_MISO_PIN != TFT_MOSI_PIN) + pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO); #endif pin_PullConfig(get_GPIO_Port(STM_PORT(digitalPinToPinName(TFT_SCK_PIN))), STM_LL_GPIO_PIN(digitalPinToPinName(TFT_SCK_PIN)), GPIO_PULLDOWN); #ifdef SPI1_BASE if (SPIx.Instance == SPI1) { __HAL_RCC_SPI1_CLK_ENABLE(); - __HAL_RCC_DMA1_CLK_ENABLE(); + #ifdef STM32F1xx + __HAL_RCC_DMA1_CLK_ENABLE(); + DMAtx.Instance = DMA1_Channel3; + #elif defined(STM32F4xx) + __HAL_RCC_DMA2_CLK_ENABLE(); + DMAtx.Instance = DMA2_Stream3; + DMAtx.Init.Channel = DMA_CHANNEL_3; + #endif SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4; - DMAtx.Instance = DMA1_Channel3; } #endif #ifdef SPI2_BASE if (SPIx.Instance == SPI2) { __HAL_RCC_SPI2_CLK_ENABLE(); - __HAL_RCC_DMA1_CLK_ENABLE(); - DMAtx.Instance = DMA1_Channel5; + #ifdef STM32F1xx + __HAL_RCC_DMA1_CLK_ENABLE(); + DMAtx.Instance = DMA1_Channel5; + #elif defined(STM32F4xx) + __HAL_RCC_DMA1_CLK_ENABLE(); + DMAtx.Instance = DMA1_Stream4; + DMAtx.Init.Channel = DMA_CHANNEL_4; + #endif } #endif #ifdef SPI3_BASE if (SPIx.Instance == SPI3) { __HAL_RCC_SPI3_CLK_ENABLE(); - __HAL_RCC_DMA2_CLK_ENABLE(); - DMAtx.Instance = DMA2_Channel2; + #ifdef STM32F1xx + __HAL_RCC_DMA2_CLK_ENABLE(); + DMAtx.Instance = DMA2_Channel2; + #elif defined(STM32F4xx) + __HAL_RCC_DMA1_CLK_ENABLE(); + DMAtx.Instance = DMA1_Stream5; + DMAtx.Init.Channel = DMA_CHANNEL_5; + #endif } #endif @@ -110,6 +119,9 @@ void TFT_SPI::Init() { DMAtx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD; DMAtx.Init.Mode = DMA_NORMAL; DMAtx.Init.Priority = DMA_PRIORITY_LOW; + #if defined(STM32F4xx) + DMAtx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; + #endif } void TFT_SPI::DataTransferBegin(uint16_t DataSize) { @@ -142,12 +154,12 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) { __HAL_SPI_ENABLE(&SPIx); for (i = 0; i < 4; i++) { - #if TFT_MISO_PIN != TFT_MOSI_PIN + if (TFT_MISO_PIN != TFT_MOSI_PIN) { //if (hspi->Init.Direction == SPI_DIRECTION_2LINES) { while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {} SPIx.Instance->DR = 0; //} - #endif + } while ((SPIx.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {} Data = (Data << 8) | SPIx.Instance->DR; } @@ -162,21 +174,34 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) { } bool TFT_SPI::isBusy() { - if (DMAtx.Instance->CCR & DMA_CCR_EN) + #if defined(STM32F1xx) + volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET; + #elif defined(STM32F4xx) + volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN; + #endif + if (dmaEnabled) { if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0) Abort(); - return DMAtx.Instance->CCR & DMA_CCR_EN; + } + else { + Abort(); + } + return dmaEnabled; } void TFT_SPI::Abort() { - __HAL_DMA_DISABLE(&DMAtx); + // First, abort any running dma + HAL_DMA_Abort(&DMAtx); + // DeInit objects + HAL_DMA_DeInit(&DMAtx); + HAL_SPI_DeInit(&SPIx); + // Deselect CS DataTransferEnd(); } void TFT_SPI::Transmit(uint16_t Data) { - #if TFT_MISO_PIN == TFT_MOSI_PIN + if (TFT_MISO_PIN == TFT_MOSI_PIN) SPI_1LINE_TX(&SPIx); - #endif __HAL_SPI_ENABLE(&SPIx); @@ -185,26 +210,23 @@ void TFT_SPI::Transmit(uint16_t Data) { while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {} while ((SPIx.Instance->SR & SPI_FLAG_BSY) == SPI_FLAG_BSY) {} - #if TFT_MISO_PIN != TFT_MOSI_PIN + if (TFT_MISO_PIN != TFT_MOSI_PIN) __HAL_SPI_CLEAR_OVRFLAG(&SPIx); /* Clear overrun flag in 2 Lines communication mode because received is not read */ - #endif } void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) { + // Wait last dma finish, to start another + while(isBusy()) { } + DMAtx.Init.MemInc = MemoryIncrease; HAL_DMA_Init(&DMAtx); + if (TFT_MISO_PIN == TFT_MOSI_PIN) + SPI_1LINE_TX(&SPIx); + DataTransferBegin(); - #if TFT_MISO_PIN == TFT_MOSI_PIN - SPI_1LINE_TX(&SPIx); - #endif - - DMAtx.DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << DMAtx.ChannelIndex); - DMAtx.Instance->CNDTR = Count; - DMAtx.Instance->CPAR = (uint32_t)&(SPIx.Instance->DR); - DMAtx.Instance->CMAR = (uint32_t)Data; - __HAL_DMA_ENABLE(&DMAtx); + HAL_DMA_Start(&DMAtx, (uint32_t)Data, (uint32_t)&(SPIx.Instance->DR), Count); __HAL_SPI_ENABLE(&SPIx); SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN); /* Enable Tx DMA Request */ diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 643d577d1b..7f0a99dca3 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -365,6 +365,7 @@ #define BOARD_FYSETC_S6_V2_0 4216 // FYSETC S6 v2.0 board #define BOARD_FLYF407ZG 4217 // FLYF407ZG board (STM32F407ZG) #define BOARD_MKS_ROBIN2 4218 // MKS_ROBIN2 (STM32F407ZE) +#define BOARD_MKS_ROBIN_PRO_V2 4219 // MKS Robin Pro V2 (STM32F407VE) // // ARM Cortex M7 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index fbae5356ca..c9f6f7b3b3 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -588,6 +588,8 @@ #include "stm32f4/pins_FLYF407ZG.h" // STM32F4 env:FLYF407ZG #elif MB(MKS_ROBIN2) #include "stm32f4/pins_MKS_ROBIN2.h" // STM32F4 env:MKS_ROBIN2 +#elif MB(MKS_ROBIN_PRO_V2) + #include "stm32f4/pins_MKS_ROBIN_PRO_V2.h" // STM32F4 env:mks_robin_pro2 // // ARM Cortex M7 diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h new file mode 100644 index 0000000000..e3065439d7 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h @@ -0,0 +1,381 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(STM32F4, STM32F4xx) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS Robin Nano V3 supports up to 1 hotends / E-steppers." +#endif + +#define BOARD_INFO_NAME "MKS Robin PRO V2" + +// Use one of these or SDCard-based Emulation will be used +//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation +//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation +#define I2C_EEPROM + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// + +// +// Note: MKS Robin board is using SPI2 interface. +// +//#define SPI_MODULE 2 + +// +// Limit Switches +// +#define X_DIAG_PIN PA15 +#define Y_DIAG_PIN PA12 +#define Z_DIAG_PIN PA11 +#define E0_DIAG_PIN PC4 +#define E1_DIAG_PIN PE7 + +// + +#define X_STOP_PIN PA15 +#define Y_STOP_PIN PA12 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA4 // MT_DET +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 +#ifndef X_CS_PIN + #define X_CS_PIN PD5 +#endif + +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 +#ifndef Y_CS_PIN + #define Y_CS_PIN PD7 +#endif + +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 +#ifndef Z_CS_PIN + #define Z_CS_PIN PD4 +#endif + +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 +#ifndef E0_CS_PIN + #define E0_CS_PIN PD9 +#endif + +#define E1_ENABLE_PIN PA3 +#define E1_STEP_PIN PD15 +#define E1_DIR_PIN PA1 +#ifndef E1_CS_PIN + #define E1_CS_PIN PD8 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PD14 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PD1 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PD0 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #define X_SERIAL_TX_PIN PD5 + #define X_SERIAL_RX_PIN PD5 + + #define Y_SERIAL_TX_PIN PD7 + #define Y_SERIAL_RX_PIN PD7 + + #define Z_SERIAL_TX_PIN PD4 + #define Z_SERIAL_RX_PIN PD4 + + #define E0_SERIAL_TX_PIN PD9 + #define E0_SERIAL_RX_PIN PD9 + + #define E1_SERIAL_TX_PIN PD8 + #define E1_SERIAL_RX_PIN PD8 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif // TMC2208 || TMC2209 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_BED_PIN PC0 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC3 // HEATER1 +#define HEATER_1_PIN PB0 // HEATER2 +#define HEATER_BED_PIN PA0 // HOT BED + +#define FAN_PIN PB1 // FAN + +// +// Thermocouples +// +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PE6 // TC2 - CS2 + +// +// Misc. Functions +// +// #define POWER_LOSS_PIN PA2 // PW_DET +// #define PS_ON_PIN PA3 // PW_OFF +// #define SUICIDE_PIN PB2 // Enable MKSPWC support +// #define KILL_PIN PA2 // Enable MKSPWC support +// #define KILL_PIN_INVERTING true // Enable MKSPWC support +#define SERVO0_PIN PA8 // Enable BLTOUCH support +//#define LED_PIN PB2 + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +// #define USE_NEW_SPI_API 1 + +// +// Onboard SD card +// NOT compatible with LCD +// +// detect pin dont work when ONBOARD and NO_SD_HOST_DRIVE disabled +#if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD + #define CUSTOM_SPI_PINS + #if ENABLED(CUSTOM_SPI_PINS) + + #if USE_NEW_SPI_API + #define SD_SPI MARLIN_SPI(HardwareSPI3, PC9) + #else + #define ENABLE_SPI3 + #define SS_PIN -1 + #define SDSS PC9 + #define SCK_PIN PC10 + #define MISO_PIN PC11 + #define MOSI_PIN PC12 + #endif + #define SD_DETECT_PIN PD12 + #endif +#endif + +/* +// +// LCD SD +// +#if SDCARD_CONNECTION == LCD + #define CUSTOM_SPI_PINS + #if ENABLED(CUSTOM_SPI_PINS) + #define ENABLE_SPI1 + #define SDSS PE10 + #define SCK_PIN PA5 + #define MISO_PIN PA6 + #define MOSI_PIN PA7 + #define SD_DETECT_PIN PE12 + #endif +#endif +*/ + +// +// LCD / Controller +#define SPI_FLASH +// #define HAS_SPI_FLASH 1 +#define SPI_DEVICE 2 +#define SPI_FLASH_SIZE 0x1000000 +#if ENABLED(SPI_FLASH) + #define W25QXX_CS_PIN PB12 + #define W25QXX_MOSI_PIN PB15 + #define W25QXX_MISO_PIN PB14 + #define W25QXX_SCK_PIN PB13 +#endif + +/** + * _____ _____ + * (BEEPER)PC5 | · · | PE13(BTN_ENC) (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK) + * (LCD_EN)PD13 | · · | PC6(LCD_RS) (BTN_EN1) PE8 | · · | PE10 (SPI1 CS) + * (LCD_D4)PE14 | · · | PE15(LCD_D5) (BTN_EN2) PE11 | · · | PA7 (SPI1 MOSI) + * (LCD_D6)PD11 | · · | PD10(LCD_D7) (SPI DET) PE12 | · · | RESET + * GND | · · | 5V GND | · · | 3.3V + * ￣￣￣ ￣￣￣ + * EXP1 EXP2 + */ + +#if EITHER(TFT_480x320_SPI, TFT_LVGL_UI_SPI) + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X -17253 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y 11579 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X 514 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y -24 + #endif + #ifndef TOUCH_ORIENTATION + #define TOUCH_ORIENTATION TOUCH_LANDSCAPE + #endif + + #define TFT_CS_PIN PD11 + #define TFT_SCK_PIN PA5 + #define TFT_MISO_PIN PA6 + #define TFT_MOSI_PIN PA7 + #define TFT_DC_PIN PD10 + #define TFT_RST_PIN PC6 + #define TFT_A0_PIN TFT_DC_PIN + + #define TFT_RESET_PIN PC6 + #define TFT_BACKLIGHT_PIN PD13 + + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 + + #define LCD_BACKLIGHT_PIN PD13 + #ifndef TFT_WIDTH + #define TFT_WIDTH 480 + #endif + #ifndef TFT_HEIGHT + #define TFT_HEIGHT 320 + #endif + + #define TOUCH_CS_PIN PE14 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + #define BEEPER_PIN PC5 + #define BTN_ENC PE13 + + #define LCD_READ_ID 0xD3 + #define LCD_USE_DMA_SPI + + // #define TFT_DRIVER ST7796 + #define TFT_BUFFER_SIZE 14400 + +#elif HAS_SPI_LCD + #define BEEPER_PIN PC5 + #define BTN_ENC PE13 + #define LCD_PINS_ENABLE PD13 + #define LCD_PINS_RS PC6 + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + #define LCD_BACKLIGHT_PIN -1 + + // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor) + #if ENABLED(MKS_MINI_12864) + //#define LCD_BACKLIGHT_PIN -1 + //#define LCD_RESET_PIN -1 + #define DOGLCD_A0 PD11 + #define DOGLCD_CS PE15 + //#define DOGLCD_SCK PA5 + //#define DOGLCD_MOSI PA7 + + // Required for MKS_MINI_12864 with this board + //#define MKS_LCD12864B + //#undef SHOW_BOOTSCREEN + + #else // !MKS_MINI_12864 + + #define LCD_PINS_D4 PE14 + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 PE15 + #define LCD_PINS_D6 PD11 + #define LCD_PINS_D7 PD10 + #endif + + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(600) + #endif + + #endif // !MKS_MINI_12864 + +#elif ENABLED(SPI_GRAPHICAL_TFT) + #define SPI_TFT_CS_PIN PD11 + #define SPI_TFT_SCK_PIN PA5 + #define SPI_TFT_MISO_PIN PA6 + #define SPI_TFT_MOSI_PIN PA7 + #define SPI_TFT_DC_PIN PD10 + #define SPI_TFT_RST_PIN PC6 + + #define LCD_BACKLIGHT_PIN PD13 + + #define TOUCH_CS_PIN PE14 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + #define BEEPER_PIN PC5 + #define BTN_ENC PE13 +#endif // HAS_SPI_LCD diff --git a/platformio.ini b/platformio.ini index 237634a454..a8b81d755e 100644 --- a/platformio.ini +++ b/platformio.ini @@ -1351,6 +1351,26 @@ extra_scripts = ${common.extra_scripts} buildroot/share/PlatformIO/scripts/stm32_bootloader.py buildroot/share/PlatformIO/scripts/mks_encrypt.py +# +# MKS Robin Pro V2 +# +[env:mks_robin_pro2] +platform = ${common_stm32.platform} +extends = common_stm32 +build_flags = ${common_stm32.build_flags} -DHAL_HCD_MODULE_ENABLED -DUSBHOST -DARDUINO_BLACK_F407VE +board = genericSTM32F407VET6 +board_build.core = stm32 +board_build.variant = MARLIN_F407VE +board_build.ldscript = ldscript.ld +board_build.firmware = Robin_nano35.bin +build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC +debug_tool = jlink +upload_protocol = jlink +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/stm32_bootloader.py + buildroot/share/PlatformIO/scripts/mks_encrypt.py + ################################# # # # Other Architectures #