melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

FLSUN Delta QQS-Pro pins (#19793)

Browse Source
2.0.x
Foxies 4 years ago committed by GitHub
parent 7d64de646a
commit 9aee6674bb
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 386 additions and 0 deletions
Show Stats Download Patch File Download Diff File

1
Marlin/src/core/boards.h
Unescape Escape View File

@ -325,6 +325,7 @@
#define BOARD_CREALITY_V427 4036 // Creality v4.2.7 (STM32F103RE) #define BOARD_CREALITY_V427 4036 // Creality v4.2.7 (STM32F103RE)
#define BOARD_TRIGORILLA_PRO 4037 // Trigorilla Pro (STM32F103ZET6) #define BOARD_TRIGORILLA_PRO 4037 // Trigorilla Pro (STM32F103ZET6)
#define BOARD_FLY_MINI 4038 // FLY MINI (STM32F103RCT6) #define BOARD_FLY_MINI 4038 // FLY MINI (STM32F103RCT6)
#define BOARD_FLSUN_HISPEED 4039 // FLSUN HiSpeedV1 (STM32F103VET6)
// //
// ARM Cortex-M4F // ARM Cortex-M4F

2
Marlin/src/pins/pins.h
Unescape Escape View File

@ -581,6 +581,8 @@
#include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro #include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro
#elif MB(FLY_MINI) #elif MB(FLY_MINI)
#include "stm32f1/pins_FLY_MINI.h" // STM32F1 env:FLY_MINI #include "stm32f1/pins_FLY_MINI.h" // STM32F1 env:FLY_MINI
#elif MB(FLSUN_HISPEED)
#include "stm32f1/pins_FLSUN_HISPEED.h" // STM32F1 env:flsun_hispeed
// //
// ARM Cortex-M4F // ARM Cortex-M4F

366
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
Unescape Escape View File

@ -0,0 +1,366 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* FLSUN HiSpeed V1 (STM32F103VET6) board pin assignments
* FLSun Hispeed (clone MKS_Robin_miniV2) board.
*
* MKS Robin Mini USB uses UART3 (PB10-TX, PB11-RX)
* #define SERIAL_PORT_2 3
*/
#if NOT_TARGET(__STM32F1__, STM32F1xx)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
#error "FLSUN HiSpeedV1 supports 1 hotend / E-stepper. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "FLSun HiSpeedV1"
#define BOARD_WEBSITE_URL "github.com/Foxies-CSTL"
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
//
// EEPROM
//
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
#endif
// SPI
// Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface.
//
#define ENABLE_SPI2
// SPI Flash
#define HAS_SPI_FLASH 1
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#if HAS_SPI_FLASH
// SPI 2
#define W25QXX_CS_PIN PB12 // SPI2_NSS / Flash chip-select
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#endif
//
// Servos
//
//#define SERVO0_PIN PA8 // use IO0 to enable BLTOUCH support/remove Mks_Wifi
//
// Limit Switches
//
#define X_STOP_PIN PA15 // -X
#define Y_STOP_PIN PA12 // -Y
#define Z_MIN_PIN PA11 // -Z
#define Z_MAX_PIN PC4 // +Z
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN MT_DET_1_PIN
#endif
//
// Steppers
//
#define X_ENABLE_PIN PE4 // X_EN
#define X_STEP_PIN PE3 // X_STEP
#define X_DIR_PIN PE2 // X_DIR
#define Y_ENABLE_PIN PE1 // Y_EN
#define Y_STEP_PIN PE0 // Y_STEP
#define Y_DIR_PIN PB9 // Y_DIR
#define Z_ENABLE_PIN PB8 // Z_EN
#define Z_STEP_PIN PB5 // Z_STEP
#define Z_DIR_PIN PB4 // Z_DIR
#define E0_ENABLE_PIN PB3 // E0_EN
#define E0_STEP_PIN PD6 // E0_STEP
#define E0_DIR_PIN PD3 // E0_DIR
//
// Drivers
//
#if HAS_TMC220x
#if ENABLED(HARDWARE_SERIAL) /* TMC2209 */
#define X_SLAVE_ADDRESS 3 // | | :
#define Y_SLAVE_ADDRESS 2 // : | :
#define Z_SLAVE_ADDRESS 1 // | : :
//#define E0_SLAVE_ADDRESS 0 // : : :
#define X_SERIAL_TX_PIN PA9 // TXD1
#define X_SERIAL_RX_PIN PA9 // TXD1
#define Y_SERIAL_TX_PIN PA9 // TXD1
#define Y_SERIAL_RX_PIN PA9 // TXD1
#define Z_SERIAL_TX_PIN PA9 // TXD1
#define Z_SERIAL_RX_PIN PA9 // TXD1
#elif ENABLED(SOFTWARE_SERIAL) /* TMC220x */
/**
* TMC2208 stepper UART-configurable by PDN_UART pin
* Software serial
*/
#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0
#define X_SERIAL_TX_PIN PA10 // RXD1
#define X_SERIAL_RX_PIN PA10 // RXD1
#define Y_SERIAL_TX_PIN PA9 // TXD1
#define Y_SERIAL_RX_PIN PA9 // TXD1
#define Z_SERIAL_TX_PIN PC7 // IO1
#define Z_SERIAL_RX_PIN PC7 // IO1
#endif
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#else
// Motor current PWM pins
#define MOTOR_CURRENT_PWM_XY_PIN PA6 // VREF2/3 CONTROL XY
#define MOTOR_CURRENT_PWM_Z_PIN PA7 // VREF4 CONTROL Z
#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
#ifndef DEFAULT_PWM_MOTOR_CURRENT
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
#endif
/**
* src: MKS Robin_Mini V2
* __ESP(M1)__ -J1-
* GND| 15 | | 08 |+3v3 (22)=>RXD1(PA10) //
* | 16 | | 07 |MOSI (21)=>TXD1(PA9) // active low, probably OK to leave floating
* IO2| 17 | | 06 |MISO (19)=>IO1(PC7) // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* IO0| 18 | | 05 |CLK (18)=>IO0(PA8) // must be high (ESP3D software configures this with a pullup so OK to leave as floating)
* IO1| 19 | | 03 |EN (03)=>WIFI_EN() // Must be high for module to run
* | nc | | nc | (01)=>WIFI_CTRL(PA5)
* RX| 21 | | nc |
* TX| 22 | | 01 |RST
* ￣￣ AE￣￣
*
*/
#ifdef ESP_WIFI
#define WIFI_IO0_PIN PA8 // PC13 MKS ESP WIFI IO0 PIN
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
#define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN
#endif
#endif
//
// EXTRUDER
//
#if AXIS_DRIVER_TYPE(E0,TMC2208)||AXIS_DRIVER_TYPE(E0,TMC2209)
#define E0_SLAVE_ADDRESS 0
#define E0_SERIAL_TX_PIN PA8 // IO0
#define E0_SERIAL_RX_PIN PA8 // IO0
#define TMC_BAUD_RATE 19200
#else
// Motor current PWM pins
#define MOTOR_CURRENT_PWM_E_PIN PB0 // VREF1 CONTROL E
#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
#ifndef DEFAULT_PWM_MOTOR_CURRENT
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
#endif
#endif
//
// Temperature Sensors(THM)
//
#define TEMP_0_PIN PC1 // TEMP_E0
#define TEMP_BED_PIN PC0 // TEMP_BED
//
// Heaters / Fans
//
#define HEATER_0_PIN PC3 // HEATER_E0
#define HEATER_BED_PIN PA0 // HEATER_BED-WKUP
#define FAN_PIN PB1 // E_FAN
//#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
//
// Misc. Functions
//
//#define POWER_LOSS_PIN PA1 // PW_SO
#if ENABLED(BACKUP_POWER_SUPPLY)
#define POWER_LOSS_PIN PA2 // PW_DET (UPS) MKSPWC
#endif
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL)
#define KILL_PIN PA2 // PW_DET
#define KILL_PIN_INVERTING true //
//#define PS_ON_PIN PA3 // PW_CN /PW_OFF
#endif
#define MT_DET_1_PIN PA4 // MT_DET
#define MT_DET_2_PIN PE6 // FALA_CRTL
#define MT_DET_PIN_INVERTING false
//
// LED / NEOPixel
//
//#define LED_PIN PB2 // BOOT1
#if ENABLED(NEOPIXEL_LED)
#define LED_PWM PA8
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN LED_PWM // USED WIFI IO0/IO1/TX/RX PIN
#endif
#endif
//Others test.
//#define SERVO0_PIN PA5 // WIFI CRTL
//#define GPIO_CLEAR PA8 // IO0
//#define GPIO_SET PA5
//
// SD Card
//
#define SDIO_SUPPORT
#define SDIO_CLOCK 4500000 // 4.5 MHz /* 18 MHz (18000000) or 4.5MHz (450000) */
//#define SDIO_CLOCK 18000000 // 18 MHz (18000000)
#if ENABLED(SDIO_SUPPORT)
#define SCK_PIN PB13 // SPI2
#define MISO_PIN PB14 // SPI2
#define MOSI_PIN PB15 // SPI2
#define SD_DETECT_PIN PD12 // SD_CD
#endif
//
// LCD / Controller
//
#ifndef BEEPER_PIN
#define BEEPER_PIN PC5
#endif
/**
* Note: MKS Robin TFT screens use various TFT controllers
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
* ILI9488 is not supported
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
*
* If the screen stays white, disable 'LCD_RESET_PIN'
* to let the bootloader init the screen.
*
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
*/
// MKS Robin TFT v2.0 with ILI9341
// Read display identification information (0xD3 on ILI9341)
//#define XPT2046_X_CALIBRATION 12013
//#define XPT2046_Y_CALIBRATION -8711
//#define XPT2046_X_OFFSET -32
//#define XPT2046_Y_OFFSET 256
// MKS Robin TFT v1.1 with ILI9328
//#define XPT2046_X_CALIBRATION -11792
//#define XPT2046_Y_CALIBRATION 8947
//#define XPT2046_X_OFFSET 342
//#define XPT2046_Y_OFFSET -19
// MKS Robin TFT v1.1 with R61505
//#define XPT2046_X_CALIBRATION 12489
//#define XPT2046_Y_CALIBRATION 9210
//#define XPT2046_X_OFFSET -52
//#define XPT2046_Y_OFFSET -17
// QQS-Pro uses MKS Robin TFT v2.0
// Shared FSMC Configs
#if HAS_FSMC_TFT
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1
#define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0
#define TFT_RESET_PIN PC6 // FSMC_RST
#define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2
#endif
// XPT2046 Touch Screen calibration
#if EITHER(TFT_LVGL_UI_FSMC, TFT_COLOR_UI)
#define TFT_BUFFER_SIZE 14400
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION 12218
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION -8814
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET -35
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET 256
#endif
#elif ENABLED(TFT_CLASSIC_UI)
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION 12149
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION -8746
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET -35
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET 256
#endif
#define TFT_MARLINUI_COLOR 0xFFFF // White
#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow
#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
#endif
#if NEED_TOUCH_PINS
#define TOUCH_CS_PIN PC2 // SPI2_NSS
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#endif

2
buildroot/share/PlatformIO/scripts/add_nanolib.py
Unescape Escape View File

@ -0,0 +1,2 @@
Import("env")
env.Append(LINKFLAGS=["--specs=nano.specs"])

15
platformio.ini
Unescape Escape View File

@ -1133,6 +1133,21 @@ debug_tool = jlink
upload_protocol = jlink upload_protocol = jlink
monitor_speed = 115200 monitor_speed = 115200
#
# FLSUN QQ (STM32F103VET6)
#
[env:flsun_hispeed]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103VE
platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_mini.py
buildroot/share/PlatformIO/scripts/add_nanolib.py
build_flags = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4
lib_deps = SoftwareSerialM
#Adafruit NeoPixel=https://github.com/Foxies-CSTL/Robin-NeoPixel-Lib/archive/master.zip
# #
# STM32F401VE # STM32F401VE
# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html # 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html

Write Preview
Loading…
Cancel
Save