FLSUN Delta QQS-Pro pins (#19793)
Foxies
4 years ago
committed by
GitHub
parent
7d64de646a
commit
9aee6674bb
@ -0,0 +1,366 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* FLSUN HiSpeed V1 (STM32F103VET6) board pin assignments
|
||||
* FLSun Hispeed (clone MKS_Robin_miniV2) board.
|
||||
*
|
||||
* MKS Robin Mini USB uses UART3 (PB10-TX, PB11-RX)
|
||||
* #define SERIAL_PORT_2 3
|
||||
*/
|
||||
|
||||
#if NOT_TARGET(__STM32F1__, STM32F1xx)
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#elif HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "FLSUN HiSpeedV1 supports 1 hotend / E-stepper. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "FLSun HiSpeedV1"
|
||||
#define BOARD_WEBSITE_URL "github.com/Foxies-CSTL"
|
||||
|
||||
//
|
||||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
||||
//
|
||||
#define DISABLE_DEBUG
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
#endif
|
||||
|
||||
// SPI
|
||||
// Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface.
|
||||
//
|
||||
#define ENABLE_SPI2
|
||||
|
||||
// SPI Flash
|
||||
#define HAS_SPI_FLASH 1
|
||||
#define SPI_FLASH_SIZE 0x1000000 // 16MB
|
||||
|
||||
#if HAS_SPI_FLASH
|
||||
// SPI 2
|
||||
#define W25QXX_CS_PIN PB12 // SPI2_NSS / Flash chip-select
|
||||
#define W25QXX_MOSI_PIN PB15
|
||||
#define W25QXX_MISO_PIN PB14
|
||||
#define W25QXX_SCK_PIN PB13
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
//#define SERVO0_PIN PA8 // use IO0 to enable BLTOUCH support/remove Mks_Wifi
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA15 // -X
|
||||
#define Y_STOP_PIN PA12 // -Y
|
||||
#define Z_MIN_PIN PA11 // -Z
|
||||
#define Z_MAX_PIN PC4 // +Z
|
||||
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN MT_DET_1_PIN
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PE4 // X_EN
|
||||
#define X_STEP_PIN PE3 // X_STEP
|
||||
#define X_DIR_PIN PE2 // X_DIR
|
||||
|
||||
#define Y_ENABLE_PIN PE1 // Y_EN
|
||||
#define Y_STEP_PIN PE0 // Y_STEP
|
||||
#define Y_DIR_PIN PB9 // Y_DIR
|
||||
|
||||
#define Z_ENABLE_PIN PB8 // Z_EN
|
||||
#define Z_STEP_PIN PB5 // Z_STEP
|
||||
#define Z_DIR_PIN PB4 // Z_DIR
|
||||
|
||||
#define E0_ENABLE_PIN PB3 // E0_EN
|
||||
#define E0_STEP_PIN PD6 // E0_STEP
|
||||
#define E0_DIR_PIN PD3 // E0_DIR
|
||||
|
||||
//
|
||||
// Drivers
|
||||
//
|
||||
#if HAS_TMC220x
|
||||
|
||||
#if ENABLED(HARDWARE_SERIAL) /* TMC2209 */
|
||||
#define X_SLAVE_ADDRESS 3 // | | :
|
||||
#define Y_SLAVE_ADDRESS 2 // : | :
|
||||
#define Z_SLAVE_ADDRESS 1 // | : :
|
||||
//#define E0_SLAVE_ADDRESS 0 // : : :
|
||||
|
||||
#define X_SERIAL_TX_PIN PA9 // TXD1
|
||||
#define X_SERIAL_RX_PIN PA9 // TXD1
|
||||
|
||||
#define Y_SERIAL_TX_PIN PA9 // TXD1
|
||||
#define Y_SERIAL_RX_PIN PA9 // TXD1
|
||||
|
||||
#define Z_SERIAL_TX_PIN PA9 // TXD1
|
||||
#define Z_SERIAL_RX_PIN PA9 // TXD1
|
||||
|
||||
#elif ENABLED(SOFTWARE_SERIAL) /* TMC220x */
|
||||
/**
|
||||
* TMC2208 stepper UART-configurable by PDN_UART pin
|
||||
* Software serial
|
||||
*/
|
||||
#define X_SLAVE_ADDRESS 0
|
||||
#define Y_SLAVE_ADDRESS 0
|
||||
#define Z_SLAVE_ADDRESS 0
|
||||
|
||||
#define X_SERIAL_TX_PIN PA10 // RXD1
|
||||
#define X_SERIAL_RX_PIN PA10 // RXD1
|
||||
|
||||
#define Y_SERIAL_TX_PIN PA9 // TXD1
|
||||
#define Y_SERIAL_RX_PIN PA9 // TXD1
|
||||
|
||||
#define Z_SERIAL_TX_PIN PC7 // IO1
|
||||
#define Z_SERIAL_RX_PIN PC7 // IO1
|
||||
|
||||
#endif
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#else
|
||||
|
||||
// Motor current PWM pins
|
||||
#define MOTOR_CURRENT_PWM_XY_PIN PA6 // VREF2/3 CONTROL XY
|
||||
#define MOTOR_CURRENT_PWM_Z_PIN PA7 // VREF4 CONTROL Z
|
||||
#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
|
||||
#ifndef DEFAULT_PWM_MOTOR_CURRENT
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
|
||||
#endif
|
||||
|
||||
/**
|
||||
* src: MKS Robin_Mini V2
|
||||
* __ESP(M1)__ -J1-
|
||||
* GND| 15 | | 08 |+3v3 (22)=>RXD1(PA10) //
|
||||
* | 16 | | 07 |MOSI (21)=>TXD1(PA9) // active low, probably OK to leave floating
|
||||
* IO2| 17 | | 06 |MISO (19)=>IO1(PC7) // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
|
||||
* IO0| 18 | | 05 |CLK (18)=>IO0(PA8) // must be high (ESP3D software configures this with a pullup so OK to leave as floating)
|
||||
* IO1| 19 | | 03 |EN (03)=>WIFI_EN() // Must be high for module to run
|
||||
* | nc | | nc | (01)=>WIFI_CTRL(PA5)
|
||||
* RX| 21 | | nc |
|
||||
* TX| 22 | | 01 |RST
|
||||
* ￣￣ AE￣￣
|
||||
*
|
||||
*/
|
||||
#ifdef ESP_WIFI
|
||||
#define WIFI_IO0_PIN PA8 // PC13 MKS ESP WIFI IO0 PIN
|
||||
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
|
||||
#define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// EXTRUDER
|
||||
//
|
||||
#if AXIS_DRIVER_TYPE(E0,TMC2208)||AXIS_DRIVER_TYPE(E0,TMC2209)
|
||||
#define E0_SLAVE_ADDRESS 0
|
||||
|
||||
#define E0_SERIAL_TX_PIN PA8 // IO0
|
||||
#define E0_SERIAL_RX_PIN PA8 // IO0
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#else
|
||||
// Motor current PWM pins
|
||||
#define MOTOR_CURRENT_PWM_E_PIN PB0 // VREF1 CONTROL E
|
||||
#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
|
||||
#ifndef DEFAULT_PWM_MOTOR_CURRENT
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors(THM)
|
||||
//
|
||||
#define TEMP_0_PIN PC1 // TEMP_E0
|
||||
#define TEMP_BED_PIN PC0 // TEMP_BED
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC3 // HEATER_E0
|
||||
#define HEATER_BED_PIN PA0 // HEATER_BED-WKUP
|
||||
|
||||
#define FAN_PIN PB1 // E_FAN
|
||||
//#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
//#define POWER_LOSS_PIN PA1 // PW_SO
|
||||
#if ENABLED(BACKUP_POWER_SUPPLY)
|
||||
#define POWER_LOSS_PIN PA2 // PW_DET (UPS) MKSPWC
|
||||
#endif
|
||||
|
||||
//
|
||||
// Power Supply Control
|
||||
//
|
||||
#if ENABLED(PSU_CONTROL)
|
||||
#define KILL_PIN PA2 // PW_DET
|
||||
#define KILL_PIN_INVERTING true //
|
||||
//#define PS_ON_PIN PA3 // PW_CN /PW_OFF
|
||||
#endif
|
||||
|
||||
#define MT_DET_1_PIN PA4 // MT_DET
|
||||
#define MT_DET_2_PIN PE6 // FALA_CRTL
|
||||
#define MT_DET_PIN_INVERTING false
|
||||
|
||||
//
|
||||
// LED / NEOPixel
|
||||
//
|
||||
//#define LED_PIN PB2 // BOOT1
|
||||
|
||||
#if ENABLED(NEOPIXEL_LED)
|
||||
#define LED_PWM PA8
|
||||
#ifndef NEOPIXEL_PIN
|
||||
#define NEOPIXEL_PIN LED_PWM // USED WIFI IO0/IO1/TX/RX PIN
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//Others test.
|
||||
//#define SERVO0_PIN PA5 // WIFI CRTL
|
||||
//#define GPIO_CLEAR PA8 // IO0
|
||||
//#define GPIO_SET PA5
|
||||
|
||||
//
|
||||
// SD Card
|
||||
//
|
||||
#define SDIO_SUPPORT
|
||||
#define SDIO_CLOCK 4500000 // 4.5 MHz /* 18 MHz (18000000) or 4.5MHz (450000) */
|
||||
//#define SDIO_CLOCK 18000000 // 18 MHz (18000000)
|
||||
#if ENABLED(SDIO_SUPPORT)
|
||||
#define SCK_PIN PB13 // SPI2
|
||||
#define MISO_PIN PB14 // SPI2
|
||||
#define MOSI_PIN PB15 // SPI2
|
||||
#define SD_DETECT_PIN PD12 // SD_CD
|
||||
#endif
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#ifndef BEEPER_PIN
|
||||
#define BEEPER_PIN PC5
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Note: MKS Robin TFT screens use various TFT controllers
|
||||
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
|
||||
* ILI9488 is not supported
|
||||
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
|
||||
*
|
||||
* If the screen stays white, disable 'LCD_RESET_PIN'
|
||||
* to let the bootloader init the screen.
|
||||
*
|
||||
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
|
||||
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
|
||||
*/
|
||||
|
||||
// MKS Robin TFT v2.0 with ILI9341
|
||||
// Read display identification information (0xD3 on ILI9341)
|
||||
//#define XPT2046_X_CALIBRATION 12013
|
||||
//#define XPT2046_Y_CALIBRATION -8711
|
||||
//#define XPT2046_X_OFFSET -32
|
||||
//#define XPT2046_Y_OFFSET 256
|
||||
|
||||
// MKS Robin TFT v1.1 with ILI9328
|
||||
//#define XPT2046_X_CALIBRATION -11792
|
||||
//#define XPT2046_Y_CALIBRATION 8947
|
||||
//#define XPT2046_X_OFFSET 342
|
||||
//#define XPT2046_Y_OFFSET -19
|
||||
|
||||
// MKS Robin TFT v1.1 with R61505
|
||||
//#define XPT2046_X_CALIBRATION 12489
|
||||
//#define XPT2046_Y_CALIBRATION 9210
|
||||
//#define XPT2046_X_OFFSET -52
|
||||
//#define XPT2046_Y_OFFSET -17
|
||||
|
||||
// QQS-Pro uses MKS Robin TFT v2.0
|
||||
|
||||
// Shared FSMC Configs
|
||||
#if HAS_FSMC_TFT
|
||||
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
|
||||
#define DOGLCD_SCK -1
|
||||
|
||||
#define FSMC_CS_PIN PD7 // NE4
|
||||
#define FSMC_RS_PIN PD11 // A0
|
||||
|
||||
#define TFT_RESET_PIN PC6 // FSMC_RST
|
||||
#define TFT_BACKLIGHT_PIN PD13
|
||||
|
||||
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
||||
#define FSMC_DMA_DEV DMA2
|
||||
#define FSMC_DMA_CHANNEL DMA_CH5
|
||||
|
||||
#define TOUCH_BUTTONS_HW_SPI
|
||||
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2
|
||||
#endif
|
||||
|
||||
// XPT2046 Touch Screen calibration
|
||||
#if EITHER(TFT_LVGL_UI_FSMC, TFT_COLOR_UI)
|
||||
#define TFT_BUFFER_SIZE 14400
|
||||
|
||||
#ifndef XPT2046_X_CALIBRATION
|
||||
#define XPT2046_X_CALIBRATION 12218
|
||||
#endif
|
||||
#ifndef XPT2046_Y_CALIBRATION
|
||||
#define XPT2046_Y_CALIBRATION -8814
|
||||
#endif
|
||||
#ifndef XPT2046_X_OFFSET
|
||||
#define XPT2046_X_OFFSET -35
|
||||
#endif
|
||||
#ifndef XPT2046_Y_OFFSET
|
||||
#define XPT2046_Y_OFFSET 256
|
||||
#endif
|
||||
|
||||
#elif ENABLED(TFT_CLASSIC_UI)
|
||||
#ifndef XPT2046_X_CALIBRATION
|
||||
#define XPT2046_X_CALIBRATION 12149
|
||||
#endif
|
||||
#ifndef XPT2046_Y_CALIBRATION
|
||||
#define XPT2046_Y_CALIBRATION -8746
|
||||
#endif
|
||||
#ifndef XPT2046_X_OFFSET
|
||||
#define XPT2046_X_OFFSET -35
|
||||
#endif
|
||||
#ifndef XPT2046_Y_OFFSET
|
||||
#define XPT2046_Y_OFFSET 256
|
||||
#endif
|
||||
|
||||
#define TFT_MARLINUI_COLOR 0xFFFF // White
|
||||
#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow
|
||||
#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
|
||||
#endif
|
||||
|
||||
#if NEED_TOUCH_PINS
|
||||
#define TOUCH_CS_PIN PC2 // SPI2_NSS
|
||||
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
|
||||
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
|
||||
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
|
||||
#endif
|
||||
@ -0,0 +1,2 @@
|
||||
Import("env")
|
||||
env.Append(LINKFLAGS=["--specs=nano.specs"])
|
||||
Loading…
Reference in New Issue