melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

🎨 EXP1/2 headers and pins cleanup (#22628)

Browse Source
x301
Scott Lahteine 3 years ago committed by Scott Lahteine
parent 02ae4bc9b9
commit 95f27cf339
40 changed files with 593 additions and 496 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/src/HAL/STM32F1/onboard_sd.cpp
Unescape Escape View File

@ -158,7 +158,7 @@ static void sd_power_on() {
ONBOARD_SD_SPI.begin();
ONBOARD_SD_SPI.setBitOrder(MSBFIRST);
ONBOARD_SD_SPI.setDataMode(SPI_MODE0);
OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH); // Set CS# high
CS_HIGH();
}
// Disable SPI function

2
Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h
Unescape Escape View File

@ -85,7 +85,6 @@
#define FAN1_PIN P0_26
#define LCD_SDSS P0_16 // LCD SD chip select
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if ENABLED(AZSMZ_12864)
#define BEEPER_PIN P1_30
@ -109,6 +108,7 @@
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."

3
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h
Unescape Escape View File

@ -54,7 +54,7 @@
/**
* ______ ______
* ------ ------
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | 1.31 NC | 3 4 | NC
* 0.18 | 5 6 3.25 NC | 5 6 0.15
@ -82,7 +82,6 @@
#define EXP2_09_PIN P0_15
#define EXP2_10_PIN P0_17
/**
* LCD / Controller
*

8
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
Unescape Escape View File

@ -184,7 +184,7 @@
#endif
/**
* ______ ______
* ------ ------
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | 1.31 (SD_DETECT) (LCD_D7) 1.23 | 3 4 | 1.22 (LCD_D6)
* (MOSI) 0.18 | 5 6 3.25 (BTN_EN2) (LCD_D5) 1.21 | 5 6 1.20 (LCD_D4)
@ -230,7 +230,7 @@
* The ANET_FULL_GRAPHICS_LCD connector plug:
*
* BEFORE AFTER
* ______ ______
* ------ ------
* GND 1 | 1 2 | 2 5V 5V 1 | 1 2 | 2 GND
* CS 3 | 3 4 | 4 BTN_EN2 CS 3 | 3 4 | 4 BTN_EN2
* SID 5 | 5 6 6 BTN_EN1 SID 5 | 5 6 6 BTN_EN1
@ -386,11 +386,11 @@
/**
* Creality Ender-2 display pinout
* _____
* -----
* 5V | 1 2 | GND
* (MOSI) P1_23 | 3 4 | P1_22 (LCD_CS)
* (LCD_A0) P1_21 | 5 6 P1_20 (BTN_EN2)
* RESET P1_19 | 7 8 | P1_18 (BTN_EN1)
* (RESET) P1_19 | 7 8 | P1_18 (BTN_EN1)
* (BTN_ENC) P0_28 | 9 10| P1_30 (SCK)
* -----
* EXP1

72
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
Unescape Escape View File

@ -239,14 +239,14 @@
#define TMC_BAUD_RATE 19200
#endif
/* _____ _____
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | 1.31 1.23 | 3 4 | 1.22
* 0.18 | 5 6 3.25 1.21 | 5 6 1.20
* 0.16 | 7 8 | 3.26 1.19 | 7 8 | 1.18
* 0.15 | 9 10| 0.17 0.28 | 9 10| 1.30
* ----- -----
* EXP2 EXP1
/** ------ ------
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | 1.31 1.23 | 3 4 | 1.22
* 0.18 | 5 6 3.25 1.21 | 5 6 1.20
* 0.16 | 7 8 | 3.26 1.19 | 7 8 | 1.18
* 0.15 | 9 10| 0.17 0.28 | 9 10| 1.30
* ------ ------
* EXP2 EXP1
*/
#define EXP1_03_PIN P1_23
@ -267,27 +267,15 @@
#define EXP2_09_PIN P0_15
#define EXP2_10_PIN P0_17
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
* RESET | · · | 1.31 (SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
* (MOSI) 0.18 | · · 3.25 (BTN_EN2) (LCD_D5) 1.21 | · · 1.20 (LCD_D4)
* (SD_SS) 0.16 | · · | 3.26 (BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
* (SCK) 0.15 | · · | 0.17 (MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
* ----- -----
* EXP2 EXP1
*/
#if ENABLED(DWIN_CREALITY_LCD)
#if EITHER(DWIN_CREALITY_LCD, IS_DWIN_MARLINUI)
// RET6 DWIN ENCODER LCD
#define BTN_ENC P1_20
#define BTN_EN1 P1_23
#define BTN_EN2 P1_22
#define BTN_ENC EXP1_06_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_04_PIN
#ifndef BEEPER_PIN
#define BEEPER_PIN P1_21
#undef SPEAKER
#define BEEPER_PIN EXP1_05_PIN
#endif
#elif HAS_WIRED_LCD && !BTT_MOTOR_EXPANSION
@ -304,13 +292,13 @@
* The ANET_FULL_GRAPHICS_LCD_ALT_WIRING connector plug:
*
* BEFORE AFTER
* _____ _____
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* open | 7 8 | BTN_ENC open | 7 8 | BTN_ENC
* CLK | 9 10| Beeper CLK | 9 10| Beeper
* ----- -----
* ------ ------
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* open | 7 8 | BTN_ENC open | 7 8 | BTN_ENC
* CLK | 9 10| BEEPER CLK | 9 10| BEEPER
* ------ ------
* LCD LCD
*/
@ -337,15 +325,15 @@
*
* The ANET_FULL_GRAPHICS_LCD connector plug:
*
* BEFORE AFTER
* ______ ______
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* open | 7 8 | BTN_ENC CLK | 7 8 | BTN_ENC
* CLK | 9 10 | Beeper open | 9 10 | Beeper
* ------ ------
* LCD LCD
* BEFORE AFTER
* ------ ------
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* open | 7 8 | BTN_ENC CLK | 7 8 | BTN_ENC
* CLK | 9 10 | BEEPER open | 9 10 | BEEPER
* ------ ------
* LCD LCD
*/
#define LCD_PINS_RS EXP1_03_PIN
@ -372,7 +360,7 @@
#elif ENABLED(ENDER2_STOCKDISPLAY)
/** Creality Ender-2 display pinout
* ______
* ------
* 5V | 1 2 | GND
* (MOSI) 1.23 | 3 4 | 1.22 (LCD_RS)
* (LCD_A0) 1.21 | 5 6 1.20 (BTN_EN2)

5
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
Unescape Escape View File

@ -126,8 +126,6 @@
#endif
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) && ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS)
#error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
#endif
@ -145,13 +143,14 @@
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
#if ENABLED(BTT_MOTOR_EXPANSION)
/** ______ ______
/** ------ ------
* NC | 1 2 | GND NC | 1 2 | GND
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG

3
Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h
Unescape Escape View File

@ -155,8 +155,6 @@
#define SDCARD_CONNECTION LCD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SD_SCK_PIN P0_15
#define SD_MISO_PIN P0_17
@ -167,5 +165,6 @@
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#endif

3
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
Unescape Escape View File

@ -165,8 +165,6 @@
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(CUSTOM_CABLE)
/**
@ -199,6 +197,7 @@
#define SD_SS_PIN P0_28
#else
#define SD_DETECT_PIN P0_27
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#endif
#endif

167
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
Unescape Escape View File

@ -215,7 +215,7 @@
// Power Supply Control
//
#if ENABLED(MKS_PWC)
#define PS_ON_PIN P2_00 // SERVO
#define PS_ON_PIN P2_00 // SERVO1
#define KILL_PIN P1_24 // Z+
#define KILL_PIN_STATE HIGH
#endif
@ -228,42 +228,79 @@
#define LED3_PIN P1_20
#define LED4_PIN P1_21
/**
* _____ _____
* (BEEPER) 1.31 | · · | 1.30 (BTN_ENC) (MISO) 0.8 | · · | 0.7 (SD_SCK)
* (LCD_EN) 0.18 | · · | 0.16 (LCD_RS) (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2)
* (LCD_D4) 0.15 | · · 0.17 (LCD_D5) (BTN_EN2) 3.26 | · · 0.9 (SD_MOSI)
* (LCD_D6) 1.0 | · · | 1.22 (LCD_D7) (SD_DETECT) 0.27 | · · | RST
* GND | · · | 5V GND | · · | NC
* ----- -----
* EXP1 EXP2
/** ------ ------
* (BEEPER) 1.31 |10 9 | 1.30 (BTN_ENC) (MISO) 0.8 |10 9 | 0.7 (SD_SCK)
* (LCD_EN) 0.18 | 8 7 | 0.16 (LCD_RS) (BTN_EN1) 3.25 | 8 7 | 0.28 (SD_CS2)
* (LCD_D4) 0.15 | 6 5 0.17 (LCD_D5) (BTN_EN2) 3.26 | 6 5 0.9 (SD_MOSI)
* (LCD_D6) 1.0 | 4 3 | 1.22 (LCD_D7) (SD_DETECT) 0.27 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN P1_22
#define EXP1_04_PIN P1_00
#define EXP1_05_PIN P0_17
#define EXP1_06_PIN P0_15
#define EXP1_07_PIN P0_16
#define EXP1_08_PIN P0_18
#define EXP1_09_PIN P1_30
#define EXP1_10_PIN P1_31
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN P0_27
#define EXP2_05_PIN P0_09
#define EXP2_06_PIN P3_26
#define EXP2_07_PIN P0_28
#define EXP2_08_PIN P3_25
#define EXP2_09_PIN P0_07
#define EXP2_10_PIN P0_08
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN EXP2_04_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#else
#define SD_SS_PIN EXP2_07_PIN
#endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
#if HAS_WIRED_LCD
#define BEEPER_PIN P1_31
#define BTN_ENC P1_30
#define BEEPER_PIN EXP1_10_PIN
#define BTN_ENC EXP1_09_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS P1_00
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 P0_18
#define BTN_EN2 P0_15
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define LCD_PINS_ENABLE P1_22
#define LCD_PINS_D4 P0_17
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define TFT_CS_PIN P1_00
#define TFT_A0_PIN P1_22
#define TFT_DC_PIN P1_22
#define TFT_MISO_PIN P0_08
#define TFT_BACKLIGHT_PIN P0_18
#define TFT_RESET_PIN P0_16
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_A0_PIN EXP1_03_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define LCD_USE_DMA_SPI
#define TOUCH_INT_PIN P0_17
#define TOUCH_CS_PIN P0_15
#define TOUCH_INT_PIN EXP1_05_PIN
#define TOUCH_CS_PIN EXP1_06_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2
@ -278,8 +315,8 @@
#define TFT_QUEUE_SIZE 6144
#endif
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#elif IS_TFTGLCD_PANEL
@ -287,74 +324,74 @@
#undef BTN_ENC
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS P3_25
#define TFTGLCD_CS EXP2_08_PIN
#endif
#else
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define LCD_SDSS P0_28
#define LCD_SDSS EXP2_07_PIN
#if ENABLED(MKS_12864OLED_SSD1306)
#define LCD_PINS_DC P0_17
#define DOGLCD_CS P0_16
#define LCD_PINS_DC EXP1_05_PIN
#define DOGLCD_CS EXP1_07_PIN
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_SCK EXP1_06_PIN
#define DOGLCD_MOSI EXP1_08_PIN
#define LCD_PINS_RS P1_00
#define LCD_PINS_D7 P1_22
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define KILL_PIN -1 // NC
#else // !MKS_12864OLED_SSD1306
#define LCD_PINS_RS P0_16
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS P0_18
#define DOGLCD_A0 P0_16
#define DOGLCD_SCK P0_07
#define DOGLCD_MOSI P0_09
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P0_17
#define RGB_LED_R_PIN EXP1_05_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_00
#define RGB_LED_G_PIN EXP1_04_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_22
#define RGB_LED_B_PIN EXP1_03_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P0_17
#define NEOPIXEL_PIN EXP1_05_PIN
#endif
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P0_17
#define DOGLCD_A0 P1_00
#define DOGLCD_CS EXP1_05_PIN
#define DOGLCD_A0 EXP1_04_PIN
#endif
#if IS_ULTIPANEL
#define LCD_PINS_D5 P0_17
#define LCD_PINS_D6 P1_00
#define LCD_PINS_D7 P1_22
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
@ -370,29 +407,9 @@
#endif // HAS_WIRED_LCD
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P0_27
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#if SD_CONNECTION_IS(ONBOARD)
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#else
#define SD_SS_PIN P0_28
#endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
//
// Other Pins
//
//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PS_ON_PIN P1_23 // SERVO P1.23
//#define PS_ON_PIN P1_23 // SERVO0 P1.23

3
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
Unescape Escape View File

@ -455,8 +455,6 @@
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SD_SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define SD_MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
@ -467,6 +465,7 @@
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."

3
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
Unescape Escape View File

@ -198,8 +198,6 @@
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SD_SCK_PIN P0_15
#define SD_MISO_PIN P0_17
@ -210,6 +208,7 @@
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."

4
Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
Unescape Escape View File

@ -179,7 +179,7 @@
#endif
/**
* ______
* ------
* 5V | 1 2 | GND
* (LCD_EN) P0_18 | 3 4 | P0_17 (LCD_RS)
* (LCD_D4) P0_15 | 5 6 P0_20 (BTN_EN2)
@ -203,7 +203,7 @@
/**
* Ender 3 V2 display SKR E3 Turbo (EXP1) Ender 3 V2 display --> SKR E3 Turbo
* ______ ______ RX 8 --> 5 P0_15
* ------ ------ RX 8 --> 5 P0_15
* 5V | 1 2 | GND 5V | 1 2 | GND TX 7 --> 9 P0_16
* (BTN_E1) A | 3 4 | B (BTN_E2) (LCD_EN) P0_18 | 3 4 | P0_17 (LCD_RS) BEEPER 5 --> 10 P2_08
* BEEPER | 5 6 ENT (BTN_ENC) (LCD_D4) P0_15 | 5 6 P0_20 (BTN_EN2)

3
Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
Unescape Escape View File

@ -229,8 +229,6 @@
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
#define SD_MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
@ -239,6 +237,7 @@
#define SD_SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#else
#undef SD_DETECT_PIN
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE)

123
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
Unescape Escape View File

@ -231,7 +231,7 @@
// Power Supply Control
//
#if ENABLED(MKS_PWC)
#define PS_ON_PIN P2_00 // SERVO
#define PS_ON_PIN P2_00 // SERVO1
#define KILL_PIN P1_24 // Z+
#define KILL_PIN_STATE HIGH
#endif
@ -256,7 +256,7 @@
#endif
/**
* _____ _____
* ----- -----
* (BEEPER) 1.31 | · · | 1.30 (BTN_ENC) (MISO) 0.8 | · · | 0.7 (SD_SCK)
* (LCD_EN) 0.18 | · · | 0.16 (LCD_RS) (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2)
* (LCD_D4) 0.15 | · · | 0.17 (LCD_D5) (BTN_EN2) 3.26 | · · | 0.9 (SD_MOSI)
@ -265,60 +265,78 @@
* ----- -----
* EXP1 EXP2
*/
#define EXP1_03_PIN P1_22
#define EXP1_04_PIN P1_00
#define EXP1_05_PIN P0_17
#define EXP1_06_PIN P0_15
#define EXP1_07_PIN P0_16
#define EXP1_08_PIN P0_18
#define EXP1_09_PIN P1_30
#define EXP1_10_PIN P1_31
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN P0_27
#define EXP2_05_PIN P0_09
#define EXP2_06_PIN P3_26
#define EXP2_07_PIN P0_28
#define EXP2_08_PIN P3_25
#define EXP2_09_PIN P0_07
#define EXP2_10_PIN P0_08
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS P3_25
#define TFTGLCD_CS EXP2_08_PIN
#endif
#define SD_DETECT_PIN P0_27
#define SD_DETECT_PIN EXP2_04_PIN
#elif HAS_WIRED_LCD
#define BEEPER_PIN P1_31
#define BTN_ENC P1_30
#define BEEPER_PIN EXP1_10_PIN
#define BTN_ENC EXP1_09_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS P1_00
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 P0_18
#define BTN_EN2 P0_15
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define LCD_PINS_ENABLE P1_22
#define LCD_PINS_D4 P0_17
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#else
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define LCD_SDSS P0_28
#define LCD_SDSS EXP2_07_PIN
#if ENABLED(MKS_12864OLED_SSD1306)
#define LCD_PINS_DC P0_17
#define DOGLCD_CS P0_16
#define LCD_PINS_DC EXP1_05_PIN
#define DOGLCD_CS EXP1_07_PIN
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_SCK EXP1_06_PIN
#define DOGLCD_MOSI EXP1_08_PIN
#define LCD_PINS_RS P1_00
#define LCD_PINS_D7 P1_22
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define KILL_PIN -1 // NC
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define TFT_CS_PIN P1_00
#define TFT_A0_PIN P1_22
#define TFT_DC_PIN P1_22
#define TFT_MISO_PIN P0_08
#define TFT_BACKLIGHT_PIN P0_18
#define TFT_RESET_PIN P0_16
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_A0_PIN EXP1_03_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define LCD_USE_DMA_SPI
#define TOUCH_INT_PIN P0_17
#define TOUCH_CS_PIN P0_15
#define TOUCH_INT_PIN EXP1_05_PIN
#define TOUCH_CS_PIN EXP1_06_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2
@ -335,50 +353,50 @@
#else // !MKS_12864OLED_SSD1306
#define LCD_PINS_RS P0_16
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS P0_18
#define DOGLCD_A0 P0_16
#define DOGLCD_SCK P0_07
#define DOGLCD_MOSI P0_09
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P0_17
#define RGB_LED_R_PIN EXP1_05_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_00
#define RGB_LED_G_PIN EXP1_04_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_22
#define RGB_LED_B_PIN EXP1_03_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P0_17
#define NEOPIXEL_PIN EXP1_05_PIN
#endif
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P0_17
#define DOGLCD_A0 P1_00
#define DOGLCD_CS EXP1_05_PIN
#define DOGLCD_A0 EXP1_04_PIN
#endif
#if IS_ULTIPANEL
#define LCD_PINS_D5 P0_17
#define LCD_PINS_D6 P1_00
#define LCD_PINS_D7 P1_22
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
@ -398,17 +416,16 @@
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P0_27
#define SD_SCK_PIN P0_07
#define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#define SD_DETECT_PIN EXP2_04_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#else
#define SD_SS_PIN P0_28
#define SD_SS_PIN EXP2_07_PIN
#endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
@ -419,4 +436,4 @@
//
//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PS_ON_PIN P1_23 // SERVO P1.23
//#define PS_ON_PIN P1_23 // SERVO0 P1.23

6
Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
Unescape Escape View File

@ -156,7 +156,7 @@
//
/**
* ______
* ------
* 5V | 1 2 | GND
* P0_18 | 3 4 | P0_16
* P0_15 | 5 6 P3_25
@ -181,7 +181,7 @@
#define EXP1_10_PIN P1_31
#if ENABLED(CR10_STOCKDISPLAY)
/** ______
/** ------
* 5V | 1 2 | GND
* LCD_EN | 3 4 | LCD_RS
* LCD_D4 | 5 6 EN2
@ -196,7 +196,7 @@
#define KILL_PIN EXP1_07_PIN
#elif ENABLED(MKS_MINI_12864)
/** ______
/** ------
* 5V | 1 2 | GND
* SPI-MOSI | 3 4 | SPI-CS
* A0 | 5 6 EN2

4
Marlin/src/pins/ramps/pins_RAMPS.h
Unescape Escape View File

@ -434,7 +434,7 @@
/**
* LCD adapter. Please note: These comes in two variants. The socket keys can be
* on either side, and may be backwards on some boards / displays.
* _____ _____
* ----- -----
* D37 |10 9 | D35 (MISO) D50 |10 9 | D52 (SCK)
* D17 | 8 7 | D16 D31 | 8 7 | D53
* D23 6 5 D25 D33 6 5 D51 (MOSI)
@ -778,7 +778,7 @@
* FYSETC TFT-81050 display pinout
*
* Board Display
* _____ _____
* ----- -----
* (SCK) D52 | 1 2 | D50 (MISO) MISO | 1 2 | SCK
* (SD_CS) D53 | 3 4 | D33 (BNT_EN2) (BNT_EN2) MOD_RESET | 3 4 | SD_CS
* (MOSI) D51 | 5 6 D31 (BNT_EN1) (BNT_EN1) LCD_CS | 5 6 MOSI

2
Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h
Unescape Escape View File

@ -137,7 +137,7 @@
/**
* EXP1 Connector EXP1 as CR10 STOCKDISPLAY
* _____ _____
* ----- -----
* PA4 | 6 5 | PC0 BEEPER_PIN | 6 5 | BTN_ENC
* PD3 | 7 4 | RESET BTN_EN1 | 7 4 | RESET
* PD2 8 3 | PA1 BTN_EN2 8 3 | LCD_PINS_D4 (ST9720 CLK)

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h
Unescape Escape View File

@ -158,8 +158,6 @@
// SD Card
//
#define HAS_ONBOARD_SD
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif

6
Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
Unescape Escape View File

@ -156,7 +156,7 @@
#define USB_CONNECT_INVERTING false
/**
* _____
* -----
* 5V | 1 2 | GND
* (LCD_EN) PB7 | 3 4 | PB8 (LCD_RS)
* (LCD_D4) PB9 | 5 6 PA10 (BTN_EN2)
@ -195,7 +195,7 @@
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
/** Creality Ender-2 display pinout
* _____
* -----
* 5V | 1 2 | GND
* (MOSI) PB7 | 3 4 | PB8 (LCD_RS)
* (LCD_A0) PB9 | 5 6 PA10 (BTN_EN2)
@ -229,7 +229,7 @@
/** FYSETC TFT TFT81050 display pinout
*
* Board Display
* _____ _____
* ----- -----
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI)

8
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
Unescape Escape View File

@ -117,7 +117,7 @@
/**
* SKR Mini E3 V1.0, V1.2 SKR Mini E3 V2.0
* ______ ______
* ------ ------
* 5V | 1 2 | GND 5V | 1 2 | GND
* (LCD_EN) PB7 | 3 4 | PB8 (LCD_RS) (LCD_EN) PB15 | 3 4 | PB8 (LCD_RS)
* (LCD_D4) PB9 | 5 6 PA10 (BTN_EN2) (LCD_D4) PB9 | 5 6 PA10 (BTN_EN2)
@ -134,7 +134,7 @@
#define EXP1_3 PB7
#endif
#if ENABLED(DWIN_CREALITY_LCD)
#if EITHER(DWIN_CREALITY_LCD, IS_DWIN_MARLINUI)
/**
* ------ ------ ------
* VCC | 1 2 | GND VCC | 1 2 | GND GND | 2 1 | VCC
@ -205,7 +205,7 @@
* TFTGLCD_PANEL_SPI display pinout
*
* Board Display
* ______ ______
* ------ ------
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) LCD_CS | 3 4 | SD_CS (PA10)
* (FREE) PB9 | 5 6 | PA10 (SD_CS) (FREE) | 5 6 | MOSI (SPI1-MOSI)
@ -248,7 +248,7 @@
* FYSETC TFT TFT81050 display pinout
*
* Board Display
* ______ ______
* ------ ------
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
* (FREE) PB9 | 5 6 | PA10 (SD_CS) (PB8) LCD_CS | 5 6 | MOSI (SPI1-MOSI)

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
Unescape Escape View File

@ -98,7 +98,7 @@
//
/**
* _____ _____
* ----- -----
* NC | · · | GND 5V | · · | GND
* RESET | · · | PB9 (SD_DETECT) (LCD_D7) PC14 | · · | PC15 (LCD_D6)
* (MOSI) PB5 | · · | PB8 (BTN_EN2) (LCD_D5) PB7 | · · | PC13 (LCD_D4)

2
Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
Unescape Escape View File

@ -122,7 +122,7 @@
#define NEOPIXEL_PIN PC7 // The NEOPIXEL LED driving pin
/**
* 1 _____ 2
* 1 ----- 2
* PB5 | · · | PB6
* PA2 | · · | RESET
* PA3 | · · | PB8

1
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
Unescape Escape View File

@ -194,7 +194,6 @@
//#define LCD_LED_PIN PB2
#ifndef BEEPER_PIN
#define BEEPER_PIN PB13
//#undef SPEAKER
#endif
#elif ENABLED(DWIN_VET6_CREALITY_LCD)

75
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
Unescape Escape View File

@ -156,35 +156,67 @@
#define SDIO_SUPPORT
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
#if ENABLED(CR10_STOCKDISPLAY) && NONE(RET6_12864_LCD, VET6_12864_LCD)
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
#endif
#if ENABLED(CR10_STOCKDISPLAY)
#if ENABLED(RET6_12864_LCD)
#if ENABLED(RET6_12864_LCD)
// RET6 12864 LCD
#define LCD_PINS_RS PB12
#define LCD_PINS_ENABLE PB15
#define LCD_PINS_D4 PB13
/**
* RET6 12864 LCD
* ------
* PC6 |10 9 | PB2
* PB10 | 8 7 | PE8
* PB14 | 6 5 | PB13
* PB12 | 4 3 | PB15
* GND | 2 1 | 5V
* ------
* EXP1
*/
#define EXP1_03_PIN PB15
#define EXP1_04_PIN PB12
#define EXP1_05_PIN PB13
#define EXP1_06_PIN PB14
#define EXP1_07_PIN PE8
#define EXP1_08_PIN PB10
#define EXP1_09_PIN PB2
#define EXP1_10_PIN PC6
#define BTN_ENC PB2
#define BTN_EN1 PB10
#define BTN_EN2 PB14
#define BEEPER_PIN EXP1_10_PIN
#define BEEPER_PIN PC6
#elif ENABLED(VET6_12864_LCD)
#elif ENABLED(VET6_12864_LCD)
/**
* VET6 12864 LCD
* ------
* ? |10 9 | PC5
* PB10 | 8 7 | ?
* PA6 | 6 5 | PA5
* PA4 | 4 3 | PA7
* GND | 2 1 | 5V
* ------
* EXP1
*/
#define EXP1_03_PIN PA7
#define EXP1_04_PIN PA4
#define EXP1_05_PIN PA5
#define EXP1_06_PIN PA6
#define EXP1_07_PIN -1
#define EXP1_08_PIN PB10
#define EXP1_09_PIN PC5
#define EXP1_10_PIN -1
// VET6 12864 LCD
#define LCD_PINS_RS PA4
#define LCD_PINS_ENABLE PA7
#define LCD_PINS_D4 PA5
#else
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
#endif
#define BTN_ENC PC5
#define BTN_EN1 PB10
#define BTN_EN2 PA6
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#elif ENABLED(DWIN_CREALITY_LCD)
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#elif EITHER(DWIN_CREALITY_LCD, IS_DWIN_MARLINUI)
// RET6 DWIN ENCODER LCD
#define BTN_ENC PB14
@ -194,7 +226,6 @@
//#define LCD_LED_PIN PB2
#ifndef BEEPER_PIN
#define BEEPER_PIN PB13
#undef SPEAKER
#endif
#elif ENABLED(DWIN_VET6_CREALITY_LCD)

4
Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
Unescape Escape View File

@ -132,8 +132,8 @@
/*
* EXP1 pinout for the LCD according to Fysetcs schematic for the Cheetah board
* _____
* (Beeper) PC9 | 1 2 | PC12 (BTN_ENC)
* -----
* (BEEPER) PC9 | 1 2 | PC12 (BTN_ENC)
* (BTN_EN2) PC11 | 3 4 | PB14 (LCD_RS / MISO)
* (BTN_EN1) PC10 5 6 | PB13 (SCK)
* (LCD_EN) PB12 | 7 8 | PB15 (MOSI)

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
Unescape Escape View File

@ -133,7 +133,7 @@
#endif
/**
* _____ _____ _____
* ----- ----- -----
* (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND
* (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS)
* (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2)

18
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
Unescape Escape View File

@ -299,14 +299,16 @@
#endif
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(125)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#if HAS_MARLINUI_U8GLIB
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(125)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#endif
#endif
#define HAS_SPI_FLASH 1

6
Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h
Unescape Escape View File

@ -201,9 +201,9 @@
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_04_PIN
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(200)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(200)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#elif EITHER(ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306)

6
Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h
Unescape Escape View File

@ -332,9 +332,9 @@
#endif
#if HAS_MARLINUI_U8GLIB
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(250)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
#define BOARD_ST7920_DELAY_2 DELAY_NS(250)
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
#endif
// Remap SERVO0 PIN for BLTouch

6
Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h
Unescape Escape View File

@ -305,9 +305,9 @@
#endif
#if HAS_MARLINUI_U8GLIB
#define BOARD_ST7920_DELAY_1 DELAY_NS(200) // Tclk_fall <200ns
#define BOARD_ST7920_DELAY_2 DELAY_NS(250) // Tdata_width >200ns
#define BOARD_ST7920_DELAY_3 DELAY_NS(200) // Tclk_rise <200ns
#define BOARD_ST7920_DELAY_1 DELAY_NS(200) // Tclk_fall <200ns
#define BOARD_ST7920_DELAY_2 DELAY_NS(250) // Tdata_width >200ns
#define BOARD_ST7920_DELAY_3 DELAY_NS(200) // Tclk_rise <200ns
#endif
// Remap SERVO0 PIN for BLTouch

6
Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
Unescape Escape View File

@ -183,7 +183,7 @@
/**
* BTT E3 RRF
* _____
* -----
* 5V | 1 2 | GND
* (LCD_EN) PE11 | 3 4 | PB1 (LCD_RS)
* (LCD_D4) PE10 | 5 6 PB2 (BTN_EN2)
@ -248,7 +248,7 @@
* TFTGLCD_PANEL_SPI display pinout
*
* Board Display
* _____ _____
* ----- -----
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PE11 | 3 4 | PB1 (LCD_CS) (PE7) LCD_CS | 3 4 | SD_CS (PB2)
* (FREE) PE10 | 5 6 | PB2 (SD_CS) (FREE) | 5 6 | MOSI (SPI1-MOSI)
@ -303,7 +303,7 @@
/** FYSETC TFT TFT81050 display pinout
*
* Board Display
* _____ _____
* ----- -----
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PE11 | 3 4 | PB1 (LCD_CS) (PE7) MOD_RESET | 3 4 | SD_CS (PB2)
* (FREE) PE10 | 5 6 | PB2 (SD_CS) (PB1) LCD_CS | 5 6 | MOSI (SPI1-MOSI)

4
Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h
Unescape Escape View File

@ -311,7 +311,7 @@
#endif
/**
* ______ ______
* ------ ------
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | PC15 (SD_DETECT) (LCD_D7) PE15 | 3 4 | PE14 (LCD_D6)
* (MOSI) PA7 | 5 6 PB1 (BTN_EN2) (LCD_D5) PE13 | 5 6 PE12 (LCD_D4)
@ -366,7 +366,7 @@
#if ENABLED(BTT_MOTOR_EXPANSION)
/**
* ______ ______
* ------ ------
* NC | 1 2 | GND NC | 1 2 | GND
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG

2
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h
Unescape Escape View File

@ -367,7 +367,7 @@
#endif
#if ENABLED(BTT_MOTOR_EXPANSION)
/** _____ _____
/** ----- -----
* NC | . . | GND NC | . . | GND
* NC | . . | M1EN M2EN | . . | M3EN
* M1STP | . . M1DIR M1RX | . . M1DIAG

2
Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h
Unescape Escape View File

@ -350,7 +350,7 @@
#endif
#if ENABLED(BTT_MOTOR_EXPANSION)
/** _____ _____
/** ----- -----
* NC | . . | GND NC | . . | GND
* NC | . . | M1EN M2EN | . . | M3EN
* M1STP | . . M1DIR M1RX | . . M1DIAG

109
Marlin/src/pins/stm32f4/pins_FLYF407ZG.h
Unescape Escape View File

@ -175,17 +175,39 @@
#define FAN4_PIN PE13
#define FAN5_PIN PB11
/**
* ------ ------
* PB10 |10 9 | PE15 PB14 |10 9 | PB13
* PE14 | 8 7 | PE12 PC5 | 8 7 | PF11
* PE10 6 5 | PE9 PC4 6 5 | PB15
* PE8 | 4 3 | PE7 PB2 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | NC
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PE7
#define EXP1_04_PIN PE8
#define EXP1_05_PIN PE9
#define EXP1_06_PIN PE10
#define EXP1_07_PIN PE12
#define EXP1_08_PIN PE14
#define EXP1_09_PIN PE15
#define EXP1_10_PIN PB10
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN PB2
#define EXP2_05_PIN PB15
#define EXP2_06_PIN PC4
#define EXP2_07_PIN PF11
#define EXP2_08_PIN PC5
#define EXP2_09_PIN PB13
#define EXP2_10_PIN PB14
//
// Onboard SD support
//
#define SDIO_D0_PIN PC8
#define SDIO_D1_PIN PC9
//#define SD_CARD_DETECT_PIN PC13
#define SDIO_D2_PIN PC10
#define SDIO_D3_PIN PC11
#define SDIO_CK_PIN PC12
#define SDIO_CMD_PIN PD2
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
@ -194,37 +216,37 @@
#if SD_CONNECTION_IS(ONBOARD)
#define SDIO_SUPPORT // Use SDIO for onboard SD
#ifndef SDIO_SUPPORT
#if DISABLED(SDIO_SUPPORT)
#define SOFTWARE_SPI // Use soft SPI for onboard SD
#define SDSS SDIO_D3_PIN
#define SD_SCK_PIN SDIO_CK_PIN
#define SD_MISO_PIN SDIO_D0_PIN
#define SD_MOSI_PIN SDIO_CMD_PIN
#define SDSS PC11
#define SD_SCK_PIN PC12
#define SD_MISO_PIN PC8
#define SD_MOSI_PIN PD2
#endif
#elif SD_CONNECTION_IS(LCD)
#define SD_SCK_PIN PB13
#define SD_MISO_PIN PB14
#define SD_MOSI_PIN PB15
#define SDSS PF11
#define SD_DETECT_PIN PB2
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SDSS EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
//
// Trinamic Software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PB15
#ifndef TMC_SW_SCK
#define TMC_SW_SCK EXP2_09_PIN
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PB14
#define TMC_SW_MISO EXP2_10_PIN
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PB13
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI EXP2_05_PIN
#endif
#endif
@ -264,17 +286,18 @@
//
// LCD / Controller
//
#define BEEPER_PIN PB10
#define LCD_PINS_RS PE12
#define LCD_PINS_ENABLE PE14
#define LCD_PINS_D4 PE10
#define LCD_PINS_D5 PE9
#define LCD_PINS_D6 PE8
#define LCD_PINS_D7 PE7
#define BTN_EN1 PC4
#define BTN_EN2 PC5
#define BTN_ENC PE15
#if IS_RRD_SC
#define BEEPER_PIN EXP1_10_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define BTN_EN1 EXP2_06_PIN
#define BTN_EN2 EXP2_08_PIN
#define BTN_ENC EXP1_09_PIN
#endif
//
// Filament runout
@ -285,12 +308,14 @@
//
// ST7920 Delays
//
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(715)
#if HAS_MARLINUI_U8GLIB
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(715)
#endif
#endif

6
Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h
Unescape Escape View File

@ -138,7 +138,7 @@
#endif
/**
* _____ _____
* ----- -----
* 5V | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | PC3 (SD_DETECT) (LCD_D7) PB7 | 3 4 | PB6 (LCD_D6)
* (SD_MOSI) PA7 5 6 | PC11 (BTN_EN2) (LCD_D5) PB14 5 6 | PB13 (LCD_D4)
@ -149,7 +149,7 @@
*/
/**
* _____
* -----
* (BEEPER) PC9 | 1 2 | PC12 (BTN_ENC)
* (BTN_EN1) PC10 | 3 4 | PB14 (LCD_D5/MISO)
* (BTN_EN2) PC11 5 6 | PB13 (LCD_D4/SCK)
@ -258,7 +258,7 @@
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#endif
#endif

24
Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
Unescape Escape View File

@ -192,12 +192,12 @@
//#define KILL_PIN PC5
/**
* ______ ______
* 5V | 1 2 | GND 5V | 1 2 | GND
* PD1 | 3 4 | PD0 RESET | 3 4 | PB10
* PC12 | 5 6 PC10 PA7 | 5 6 PC7
* PD2 | 7 8 | PC11 PA4 | 7 8 | PC6
* PA8 | 9 10 | PC9 PA5 | 9 10 | PA6
* ------ ------
* PC9 |10 9 | PA8 PA6 |10 9 | PA5
* PC11 | 8 7 | PD2 PC6 | 8 7 | PA4
* PC10 | 6 5 PC12 PC7 | 6 5 PA7
* PD0 | 4 3 | PD1 PB10 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 5V
* ------ ------
* EXP1 EXP2
*/
@ -315,9 +315,15 @@
// Alter timing for graphical display
#if HAS_MARLINUI_U8GLIB
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#define BOARD_ST7920_DELAY_3 DELAY_NS(640)
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(640)
#endif
#endif
#ifndef RGB_LED_R_PIN

174
Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
Unescape Escape View File

@ -225,22 +225,46 @@
// Power Supply Control
//
#if ENABLED(MKS_PWC)
#define PS_ON_PIN PW_OFF
#define KILL_PIN PW_DET
#define PS_ON_PIN PW_OFF
#define KILL_PIN PW_DET
#define KILL_PIN_STATE HIGH
#endif
// Random Info
#define USB_SERIAL -1 // USB Serial
/**
* ------ ------
* (BEEPER) PB2 |10 9 | PE10 (BTN_ENC) (SPI1 MISO) PA6 |10 9 | PA5 (SPI1 SCK)
* (LCD_EN) PE11 | 8 7 | PD10 (LCD_RS) (BTN_EN1) PE9 | 8 7 | PA4 (SPI1 CS)
* (LCD_D4) PD9 | 6 5 PD8 (LCD_D5) (BTN_EN2) PE8 | 6 5 PA7 (SPI1 MOSI)
* (LCD_D6) PE15 | 4 3 | PE7 (LCD_D7) (SPI1_RS) PB11 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PE7
#define EXP1_04_PIN PE15
#define EXP1_05_PIN PD8
#define EXP1_06_PIN PD9
#define EXP1_07_PIN PD10
#define EXP1_08_PIN PE11
#define EXP1_09_PIN PE10
#define EXP1_10_PIN PB2
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN PB11
#define EXP2_05_PIN PA7
#define EXP2_06_PIN PE8
#define EXP2_07_PIN PA4
#define EXP2_08_PIN PE9
#define EXP2_09_PIN PA5
#define EXP2_10_PIN PA6
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
//
// Onboard SD card
//
// detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled
#if SD_CONNECTION_IS(ONBOARD)
#define ENABLE_SPI3
#define SD_SS_PIN -1
@ -248,31 +272,49 @@
#define SD_SCK_PIN PC10
#define SD_MISO_PIN PC11
#define SD_MOSI_PIN PC12
#define SD_DETECT_PIN PC4
//
// LCD SD
//
#define SD_DETECT_PIN PC4 // SD_DETECT_PIN doesn't work with NO_SD_HOST_DRIVE disabled
#elif SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS PA4
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_DETECT_PIN PB11
#define SDSS EXP2_07_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
/**
* _____ _____
* (BEEPER)PB2 | · · | PE10(BTN_ENC) (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK)
* (LCD_EN)PE11 | · · | PD10(LCD_RS) (BTN_EN1) PE9 | · · | PA4 (SPI1 CS)
* (LCD_D4)PD9 | · · PD8(LCD_D5) (BTN_EN2) PE8 | · · PA7 (SPI1 MOSI)
* (LCD_D6)PE15 | · · | PE7(LCD_D7) (SPI1_RS) PB11 | · · | RESET
* GND | · · | 5V GND | · · | 3.3V
* ￣￣￣ ￣￣￣
* EXP1 EXP2
*/
#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI)
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_SCK_PIN EXP2_09_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP1_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#define TOUCH_CS_PIN EXP1_06_PIN // SPI1_NSS
#define TOUCH_SCK_PIN EXP2_09_PIN // SPI1_SCK
#define TOUCH_MISO_PIN EXP2_10_PIN // SPI1_MISO
#define TOUCH_MOSI_PIN EXP2_05_PIN // SPI1_MOSI
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 14400
#ifndef TOUCH_CALIBRATION_X
#define TOUCH_CALIBRATION_X -17253
#endif
@ -289,51 +331,10 @@
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
#endif
#define TFT_CS_PIN PE15
#define TFT_SCK_PIN PA5
#define TFT_MISO_PIN PA6
#define TFT_MOSI_PIN PA7
#define TFT_DC_PIN PE7
#define TFT_RST_PIN PD10
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN PD10
#define TFT_BACKLIGHT_PIN PE11
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN PE11
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#define TOUCH_CS_PIN PD9 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define BTN_EN1 PE9
#define BTN_EN2 PE8
#define BEEPER_PIN PB2
#define BTN_ENC PE10
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 14400
#elif HAS_WIRED_LCD
#define BEEPER_PIN PB2
#define BTN_ENC PE10
#define LCD_PINS_ENABLE PE11
#define LCD_PINS_RS PD10
#define BTN_EN1 PE9
#define BTN_EN2 PE8
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_BACKLIGHT_PIN -1
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
@ -341,19 +342,19 @@
//#define LCD_BACKLIGHT_PIN -1
//#define LCD_RESET_PIN -1
#define DOGLCD_A0 PD11
#define DOGLCD_CS PE15
//#define DOGLCD_SCK PA5
//#define DOGLCD_MOSI PA7
#define DOGLCD_CS EXP1_04_PIN
//#define DOGLCD_SCK EXP2_09_PIN
//#define DOGLCD_MOSI EXP2_05_PIN
#elif ENABLED(MKS_MINI_12864_V3)
#define DOGLCD_CS PE11
#define DOGLCD_A0 PD10
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN PD9
#define NEOPIXEL_PIN PD8
#define DOGLCD_MOSI PA7
#define DOGLCD_SCK PA5
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define FORCE_SOFT_SPI
#endif
@ -361,17 +362,24 @@
#else
#define LCD_PINS_D4 PD9
#define LCD_PINS_D4 EXP1_06_PIN
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 PD8
#define LCD_PINS_D6 PE15
#define LCD_PINS_D7 PE7
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#endif
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#endif // !MKS_MINI_12864
#endif // HAS_WIRED_LCD
#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
#define BEEPER_PIN EXP1_10_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif

195
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h
Unescape Escape View File

@ -41,10 +41,12 @@
// Use one of these or SDCard-based Emulation will be used
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
#define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#define I2C_SCL_PIN PB6
#define I2C_SDA_PIN PB7
#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
#define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#define I2C_SCL_PIN PB6
#define I2C_SDA_PIN PB7
#endif
//
// Release PB4 (Z_DIR_PIN) from JTAG NRST role
@ -253,25 +255,11 @@
#define SD_DETECT_PIN PD12
#endif
//
// LCD SD
//
#if SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS PE10
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_DETECT_PIN PE12
#endif
//
// LCD / Controller
#define SPI_FLASH
#define HAS_SPI_FLASH 1
#define SPI_DEVICE 2
#define SPI_FLASH_SIZE 0x1000000
#if ENABLED(SPI_FLASH)
#define HAS_SPI_FLASH 1
#define SPI_DEVICE 2
#define SPI_FLASH_SIZE 0x1000000
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PC3
#define SPI_FLASH_MISO_PIN PC2
@ -279,17 +267,82 @@
#endif
/**
* _____ _____
* (BEEPER)PC5 | · · | PE13(BTN_ENC) (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK)
* (LCD_EN)PD13 | · · | PC6(LCD_RS) (BTN_EN1) PE8 | · · | PE10 (SPI1 CS)
* (LCD_D4)PE14 | · · PE15(LCD_D5) (BTN_EN2) PE11 | · · PA7 (SPI1 MOSI)
* (LCD_D6)PD11 | · · | PD10(LCD_D7) (SPI1_RS) PE12 | · · | RESET
* GND | · · | 5V GND | · · | 3.3V
* ￣￣￣ ￣￣￣
* EXP1 EXP2
* ------ ------
* (BEEPER) PC5 |10 9 | PE13 (BTN_ENC) (SPI1 MISO) PA6 |10 9 | PA5 (SPI1 SCK)
* (LCD_EN) PD13 | 8 7 | PC6 (LCD_RS) (BTN_EN1) PE8 | 8 7 | PE10 (SPI1 CS)
* (LCD_D4) PE14 6 5 | PE15 (LCD_D5) (BTN_EN2) PE11 6 5 | PA7 (SPI1 MOSI)
* (LCD_D6) PD11 | 4 3 | PD10 (LCD_D7) (SPI1_RS) PE12 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PD10
#define EXP1_04_PIN PD11
#define EXP1_05_PIN PE15
#define EXP1_06_PIN PE14
#define EXP1_07_PIN PC6
#define EXP1_08_PIN PD13
#define EXP1_09_PIN PE13
#define EXP1_10_PIN PC5
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN PE12
#define EXP2_05_PIN PA7
#define EXP2_06_PIN PE11
#define EXP2_07_PIN PE10
#define EXP2_08_PIN PE8
#define EXP2_09_PIN PA5
#define EXP2_10_PIN PA6
//
// SPI SD Card
//
#if SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS EXP2_07_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
//
// LCD / Controller
//
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI)
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_SCK_PIN EXP2_09_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP1_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#define TOUCH_CS_PIN EXP1_06_PIN // SPI1_NSS
#define TOUCH_SCK_PIN EXP2_09_PIN // SPI1_SCK
#define TOUCH_MISO_PIN EXP2_10_PIN // SPI1_MISO
#define TOUCH_MOSI_PIN EXP2_05_PIN // SPI1_MOSI
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 14400
#ifndef TOUCH_CALIBRATION_X
#define TOUCH_CALIBRATION_X -17253
#endif
@ -306,61 +359,20 @@
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
#endif
#define TFT_CS_PIN PD11
#define TFT_SCK_PIN PA5
#define TFT_MISO_PIN PA6
#define TFT_MOSI_PIN PA7
#define TFT_DC_PIN PD10
#define TFT_RST_PIN PC6
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN PD13
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#define TOUCH_CS_PIN PE14 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define BTN_EN1 PE8
#define BTN_EN2 PE11
#define BEEPER_PIN PC5
#define BTN_ENC PE13
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 14400
#elif HAS_WIRED_LCD
#define BEEPER_PIN PC5
#define BTN_ENC PE13
#define LCD_PINS_ENABLE PD13
#define LCD_PINS_RS PC6
#define BTN_EN1 PE8
#define BTN_EN2 PE11
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_BACKLIGHT_PIN -1
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
#if ENABLED(MKS_MINI_12864)
//#define LCD_BACKLIGHT_PIN -1
//#define LCD_RESET_PIN -1
#define DOGLCD_A0 PD11
#define DOGLCD_CS PE15
//#define DOGLCD_SCK PA5
//#define DOGLCD_MOSI PA7
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_CS EXP1_05_PIN
//#define DOGLCD_SCK EXP2_09_PIN
//#define DOGLCD_MOSI EXP2_05_PIN
// Required for MKS_MINI_12864 with this board
//#define MKS_LCD12864B
@ -380,32 +392,39 @@
#endif
#elif ENABLED(MKS_MINI_12864_V3)
#define DOGLCD_CS PD13
#define DOGLCD_A0 PC6
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN PE14
#define NEOPIXEL_PIN PE15
#define DOGLCD_MOSI PA7
#define DOGLCD_SCK PA5
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define FORCE_SOFT_SPI
#endif
//#define LCD_SCREEN_ROT_180
#else // !MKS_MINI_12864
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PE14
#define LCD_PINS_D4 EXP1_06_PIN
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 PE15
#define LCD_PINS_D6 PD11
#define LCD_PINS_D7 PD10
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#endif
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#endif // !MKS_MINI_12864
#endif // HAS_WIRED_LCD
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
#define BEEPER_PIN EXP1_10_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif

16
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
Unescape Escape View File

@ -258,13 +258,13 @@
#endif
/**
* _____ _____
* ----- -----
* (BEEPER)PC5 | · · | PE13(BTN_ENC) (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK)
* (LCD_EN)PD13 | · · | PC6(LCD_RS) (BTN_EN1) PE8 | · · | PE10 (SPI1 CS)
* (LCD_D4)PE14 | · · | PE15(LCD_D5) (BTN_EN2) PE11 | · · | PA7 (SPI1 MOSI)
* (LCD_D6)PD11 | · · | PD10(LCD_D7) (SPI DET) PE12 | · · | RESET
* GND | · · | 5V GND | · · | 3.3V
* ￣￣￣ ￣￣￣
* ----- -----
* EXP1 EXP2
*/
@ -355,15 +355,9 @@
#define LCD_PINS_D7 PD10
#endif
#ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef ST7920_DELAY_2
#define ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef ST7920_DELAY_3
#define ST7920_DELAY_3 DELAY_NS(600)
#endif
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#endif // !MKS_MINI_12864

Write Preview
Loading…
Cancel
Save