HW PWM sanity checks for SPINDLE_LASER_FREQUENCY (#18947)

4 years ago · 8d6a263c1c
parent cb18b858d4
commit 8d6a263c1c
11 changed files with 23 additions and 19 deletions
--- a/Marlin/src/HAL/DUE/inc/SanityCheck.h
+++ b/Marlin/src/HAL/DUE/inc/SanityCheck.h
@ -52,8 +52,8 @@
  #endif
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on DUE."
 #endif

 #if HAS_TMC_SW_SERIAL
--- a/Marlin/src/HAL/ESP32/inc/SanityCheck.h
+++ b/Marlin/src/HAL/ESP32/inc/SanityCheck.h
@ -25,8 +25,8 @@
  #error "EMERGENCY_PARSER is not yet implemented for ESP32. Disable EMERGENCY_PARSER to continue."
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on ESP32."
 #endif

 #if HAS_TMC_SW_SERIAL
--- a/Marlin/src/HAL/LINUX/inc/SanityCheck.h
+++ b/Marlin/src/HAL/LINUX/inc/SanityCheck.h
@ -30,8 +30,8 @@
  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on LINUX."
 #endif

 #if HAS_TMC_SW_SERIAL
--- a/Marlin/src/HAL/LPC1768/fast_pwm.cpp
+++ b/Marlin/src/HAL/LPC1768/fast_pwm.cpp
@ -35,5 +35,5 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
  LPC176x::pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size);
 }

-#endif // FAST_PWM_FAN || SPINDLE_LASER_PWM
+#endif // NEEDS_HARDWARE_PWM
 #endif // TARGET_LPC1768
--- a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h
+++ b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h
@ -59,6 +59,10 @@
 */
 static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are incompatible with FAST_PWM_FAN on LPC176x boards.");

+#if SPINDLE_LASER_FREQUENCY
+  static_assert(!NUM_SERVOS, "BLTOUCH and Servos are incompatible with SPINDLE_LASER_FREQUENCY on LPC176x boards.");
+#endif
+
 /**
 * Test LPC176x-specific configuration values for errors at compile-time.
 */
--- a/Marlin/src/HAL/SAMD51/inc/SanityCheck.h
+++ b/Marlin/src/HAL/SAMD51/inc/SanityCheck.h
@ -47,6 +47,6 @@
  #error "SDIO_SUPPORT is not supported on SAMD51."
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on SAMD51."
 #endif
--- a/Marlin/src/HAL/STM32/inc/SanityCheck.h
+++ b/Marlin/src/HAL/STM32/inc/SanityCheck.h
@ -28,8 +28,8 @@
 //  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
 //#endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32."
 #endif

 #if ENABLED(SDCARD_EEPROM_EMULATION) && DISABLED(SDSUPPORT)
--- a/Marlin/src/HAL/STM32F1/inc/SanityCheck.h
+++ b/Marlin/src/HAL/STM32F1/inc/SanityCheck.h
@ -29,8 +29,8 @@
  #error "EMERGENCY_PARSER is not yet implemented for STM32F1. Disable EMERGENCY_PARSER to continue."
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32F1."
 #endif

 #if !defined(HAVE_SW_SERIAL) && HAS_TMC_SW_SERIAL
--- a/Marlin/src/HAL/STM32_F4_F7/inc/SanityCheck.h
+++ b/Marlin/src/HAL/STM32_F4_F7/inc/SanityCheck.h
@ -32,8 +32,8 @@
  #error "EMERGENCY_PARSER is not yet implemented for STM32F4/7. Disable EMERGENCY_PARSER to continue."
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32F4/F7."
 #endif

 #if HAS_TMC_SW_SERIAL
--- a/Marlin/src/HAL/TEENSY31_32/inc/SanityCheck.h
+++ b/Marlin/src/HAL/TEENSY31_32/inc/SanityCheck.h
@ -29,8 +29,8 @@
  #error "EMERGENCY_PARSER is not yet implemented for Teensy 3.1/3.2. Disable EMERGENCY_PARSER to continue."
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on Teensy 3.1/3.2."
 #endif

 #if HAS_TMC_SW_SERIAL
--- a/Marlin/src/HAL/TEENSY35_36/inc/SanityCheck.h
+++ b/Marlin/src/HAL/TEENSY35_36/inc/SanityCheck.h
@ -29,8 +29,8 @@
  #error "EMERGENCY_PARSER is not yet implemented for Teensy 3.5/3.6. Disable EMERGENCY_PARSER to continue."
 #endif

-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on Teensy 3.5/3.6."
 #endif

 #if HAS_TMC_SW_SERIAL