From 894f5c24a8894b6344d2f88cc03d4d977f4af178 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Tue, 12 Feb 2019 14:25:35 -0600
Subject: [PATCH] Fix trailing whitespace

---
 Marlin/src/HAL/HAL_ESP32/i2s.cpp       | 10 +++++-----
 Marlin/src/gcode/control/M380_M381.cpp |  2 +-
 Marlin/src/module/tool_change.cpp      | 10 +++++-----
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/Marlin/src/HAL/HAL_ESP32/i2s.cpp b/Marlin/src/HAL/HAL_ESP32/i2s.cpp
index 8928a10e3b..490af62164 100644
--- a/Marlin/src/HAL/HAL_ESP32/i2s.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/i2s.cpp
@@ -162,19 +162,19 @@ int i2s_init() {
   periph_module_enable(PERIPH_I2S0_MODULE);
 
   /**
-   * Each i2s transfer will take 
+   * Each i2s transfer will take
    *   fpll = PLL_D2_CLK      -- clka_en = 0
-   * 
+   *
    *   fi2s = fpll / N + b/a  -- N = clkm_div_num
    *   fi2s = 160MHz / 2
    *   fi2s = 80MHz
-   *   
+   *
    *   fbclk = fi2s / M   -- M = tx_bck_div_num
    *   fbclk = 80MHz / 2
    *   fbclk = 40MHz
-   * 
+   *
    *   fwclk = fbclk / 32
-   * 
+   *
    *   for fwclk = 250kHz (4uS pulse time)
    *      N = 10
    *      M = 20
diff --git a/Marlin/src/gcode/control/M380_M381.cpp b/Marlin/src/gcode/control/M380_M381.cpp
index ab5dac4d3b..5598f4aed0 100644
--- a/Marlin/src/gcode/control/M380_M381.cpp
+++ b/Marlin/src/gcode/control/M380_M381.cpp
@@ -45,7 +45,7 @@ void GcodeSuite::M380() {
  * M381: Disable all solenoids if EXT_SOLENOID
  *       Disable selected/active solenoid if MANUAL_SOLENOID_CONTROL
  */
-void GcodeSuite::M381() { 
+void GcodeSuite::M381() {
   #if ENABLED(MANUAL_SOLENOID_CONTROL)
     disable_solenoid(parser.intval('S', active_extruder));
   #else
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index f561f02a02..c77f7f08e9 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -133,7 +133,7 @@
         parkingslowspeed,          // M951 J
         parkinghighspeed ,         // M951 H
         parkingtraveldistance,     // M951 D
-        compensationmultiplier;  
+        compensationmultiplier;
 
   inline void magnetic_parking_extruder_tool_change(const uint8_t tmp_extruder) {
 
@@ -178,20 +178,20 @@
     // STEP 2
 
     current_position[X_AXIS] = grabpos + offsetcompensation;
-  
+
     #if ENABLED(DEBUG_LEVELING_FEATURE)
       if (DEBUGGING(LEVELING)) {
         SERIAL_ECHOPAIR("(2) Couple extruder ", int(tmp_extruder));
         DEBUG_POS(" to new extruder GrabPos", current_position);
       }
     #endif
-  
+
     planner.buffer_line(current_position, mpe_settings.slow_feedrate, tmp_extruder);
     planner.synchronize();
-  
+
     // Delay before moving tool, to allow magnetic coupling
     gcode.dwell(150);
-  
+
     // STEP 3
 
     current_position[X_AXIS] = mpe_settings.parking_xpos[tmp_extruder] + offsetcompensation;