melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

🎨 Misc. issue review patches

Browse Source
x301
Scott Lahteine 3 years ago committed by Scott Lahteine
parent e0c439fe91
commit 7f4a49cc44
5 changed files with 16 additions and 16 deletions
Show Stats Download Patch File Download Diff File

8
Marlin/Configuration_adv.h
Unescape Escape View File

@ -329,14 +329,14 @@
* Thermal Protection parameters for the laser cooler.
*/
#if ENABLED(THERMAL_PROTECTION_COOLER)
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
/**
* Laser cooling watch settings (M143/M193).
*/
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
#endif
#if ENABLED(PIDTEMP)

4
Marlin/src/gcode/feature/pause/M600.cpp
Unescape Escape View File

@ -106,7 +106,7 @@ void GcodeSuite::M600() {
// Change toolhead if specified
const uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder && TERN1(DUAL_X_CARRIAGE, !idex_is_duplicating()))
tool_change(target_extruder, false);
tool_change(target_extruder);
#endif
// Initial retract before move to filament change position
@ -159,7 +159,7 @@ void GcodeSuite::M600() {
#if HAS_MULTI_EXTRUDER
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
tool_change(active_extruder_before_filament_change, false);
tool_change(active_extruder_before_filament_change);
#endif
TERN_(MIXING_EXTRUDER, mixer.T(old_mixing_tool)); // Restore original mixing tool

10
Marlin/src/gcode/feature/pause/M701_M702.cpp
Unescape Escape View File

@ -85,7 +85,7 @@ void GcodeSuite::M701() {
// Change toolhead if specified
uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder)
tool_change(target_extruder, false);
tool_change(target_extruder);
#endif
auto move_z_by = [](const_float_t zdist) {
@ -124,7 +124,7 @@ void GcodeSuite::M701() {
#if HAS_MULTI_EXTRUDER && (HAS_PRUSA_MMU1 || !HAS_MMU)
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
tool_change(active_extruder_before_filament_change, false);
tool_change(active_extruder_before_filament_change);
#endif
TERN_(MIXING_EXTRUDER, mixer.T(old_mixing_tool)); // Restore original mixing tool
@ -188,7 +188,7 @@ void GcodeSuite::M702() {
// Change toolhead if specified
uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder)
tool_change(target_extruder, false);
tool_change(target_extruder);
#endif
// Lift Z axis
@ -202,7 +202,7 @@ void GcodeSuite::M702() {
#if BOTH(HAS_MULTI_EXTRUDER, FILAMENT_UNLOAD_ALL_EXTRUDERS)
if (!parser.seenval('T')) {
HOTEND_LOOP() {
if (e != active_extruder) tool_change(e, false);
if (e != active_extruder) tool_change(e);
unload_filament(-fc_settings[e].unload_length, true, PAUSE_MODE_UNLOAD_FILAMENT);
}
}
@ -228,7 +228,7 @@ void GcodeSuite::M702() {
#if HAS_MULTI_EXTRUDER && (HAS_PRUSA_MMU1 || !HAS_MMU)
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
tool_change(active_extruder_before_filament_change, false);
tool_change(active_extruder_before_filament_change);
#endif
TERN_(MIXING_EXTRUDER, mixer.T(old_mixing_tool)); // Restore original mixing tool

2
Marlin/src/lcd/extui/anycubic_i3mega/anycubic_i3mega_lcd.h
Unescape Escape View File

@ -39,7 +39,7 @@ enum AnycubicMediaPauseState {
AMPAUSESTATE_PARKING,
AMPAUSESTATE_PARKED,
AMPAUSESTATE_FILAMENT_OUT,
AMPAUSESTATE_FIAMENT_PRUGING,
AMPAUSESTATE_FILAMENT_PURGING,
AMPAUSESTATE_HEATER_TIMEOUT,
AMPAUSESTATE_REHEATING,
AMPAUSESTATE_REHEAT_FINISHED

8
Marlin/src/module/temperature.cpp
Unescape Escape View File

@ -592,7 +592,7 @@ volatile bool Temperature::raw_temps_ready = false;
#define ONHEATINGSTART() C_TERN(ischamber, printerEventLEDs.onChamberHeatingStart(), B_TERN(isbed, printerEventLEDs.onBedHeatingStart(), printerEventLEDs.onHotendHeatingStart()))
#define ONHEATING(S,C,T) C_TERN(ischamber, printerEventLEDs.onChamberHeating(S,C,T), B_TERN(isbed, printerEventLEDs.onBedHeating(S,C,T), printerEventLEDs.onHotendHeating(S,C,T)))
#define WATCH_PID BOTH(WATCH_CHAMBER, PIDTEMPCHAMBER) || BOTH(WATCH_BED, PIDTEMPBED) || BOTH(WATCH_HOTENDS, PIDTEMP)
#define WATCH_PID DISABLED(NO_WATCH_PID_TUNING) && (BOTH(WATCH_CHAMBER, PIDTEMPCHAMBER) || BOTH(WATCH_BED, PIDTEMPBED) || BOTH(WATCH_HOTENDS, PIDTEMP))
#if WATCH_PID
#if BOTH(THERMAL_PROTECTION_CHAMBER, PIDTEMPCHAMBER)
@ -688,8 +688,8 @@ volatile bool Temperature::raw_temps_ready = false;
if (cycles > 2) {
const float Ku = (4.0f * d) / (float(M_PI) * (maxT - minT) * 0.5f),
Tu = float(t_low + t_high) * 0.001f,
pf = ischamber ? 0.2f : (isbed ? 0.2f : 0.6f),
df = ischamber ? 1.0f / 3.0f : (isbed ? 1.0f / 3.0f : 1.0f / 8.0f);
pf = (ischamber || isbed) ? 0.2f : 0.6f,
df = (ischamber || isbed) ? 1.0f / 3.0f : 1.0f / 8.0f;
tune_pid.Kp = Ku * pf;
tune_pid.Ki = tune_pid.Kp * 2.0f / Tu;
@ -735,7 +735,7 @@ volatile bool Temperature::raw_temps_ready = false;
if (!heated) { // If not yet reached target...
if (current_temp > next_watch_temp) { // Over the watch temp?
next_watch_temp = current_temp + watch_temp_increase; // - set the next temp to watch for
temp_change_ms = ms + SEC_TO_MS(watch_temp_period); // - move the expiration timer up
temp_change_ms = ms + SEC_TO_MS(watch_temp_period); // - move the expiration timer up
if (current_temp > watch_temp_target) heated = true; // - Flag if target temperature reached
}
else if (ELAPSED(ms, temp_change_ms)) // Watch timer expired

Write Preview
Loading…
Cancel
Save