[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) (#11068)
This commit is contained in:
Michael Triffon
Scott Lahteine
parent
3b7c5a31a3
commit
7e802145cc
@ -257,47 +257,26 @@
|
|||||||
|
|
||||||
#if ENABLED(ULTRA_LCD)
|
#if ENABLED(ULTRA_LCD)
|
||||||
|
|
||||||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
|
||||||
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
// Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
|
||||||
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
// Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
|
||||||
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
|
||||||
|
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
|
||||||
|
|
||||||
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
|
||||||
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
|
||||||
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
|
||||||
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
|
||||||
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
||||||
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
||||||
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
||||||
|
|
||||||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
#define BTN_EN1 P0_16 // J3-7 & AUX-4
|
||||||
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
#define BTN_EN2 P1_23 // J3-5 & AUX-4
|
||||||
|
#define BTN_ENC P3_25 // J3-4 & AUX-4
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
|
||||||
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
|
||||||
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
|
||||||
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(NEWPANEL)
|
|
||||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
|
||||||
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
||||||
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
||||||
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|
||||||
#endif
|
|
||||||
#else
|
#else
|
||||||
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
|
||||||
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
|
||||||
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
|
||||||
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||||||
// #define LCD_SCREEN_ROT_180
|
|
||||||
|
|
||||||
#undef BEEPER_PIN
|
|
||||||
#define BEEPER_PIN P1_30 // (37) may change if cable changes
|
|
||||||
|
|
||||||
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
||||||
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
||||||
@ -305,36 +284,78 @@
|
|||||||
|
|
||||||
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||||
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
||||||
|
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
||||||
|
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
||||||
|
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
||||||
|
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||||
|
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||||
|
|
||||||
#undef DOGLCD_CS
|
|
||||||
#define DOGLCD_CS P0_16 // (16)
|
|
||||||
#undef LCD_BACKLIGHT_PIN //P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
||||||
#undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
||||||
#undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
||||||
|
|
||||||
#undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2
|
|
||||||
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||||||
#undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2
|
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
||||||
#undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector
|
|
||||||
#define DOGLCD_SCK SCK_PIN
|
|
||||||
#define DOGLCD_MOSI MOSI_PIN
|
|
||||||
|
|
||||||
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
#ifdef ULTIPANEL
|
||||||
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
||||||
#endif
|
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
||||||
|
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
||||||
|
#endif
|
||||||
|
|
||||||
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
|
#if ENABLED(NEWPANEL)
|
||||||
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||||
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
|
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||||
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
|
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||||
|
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
||||||
|
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
||||||
|
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
||||||
|
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||||
|
// #define LCD_SCREEN_ROT_180
|
||||||
|
|
||||||
|
#undef BEEPER_PIN
|
||||||
|
#define BEEPER_PIN P1_30 // (37) may change if cable changes
|
||||||
|
|
||||||
|
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
||||||
|
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
||||||
|
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
||||||
|
|
||||||
|
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||||||
|
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
||||||
|
|
||||||
|
#undef DOGLCD_CS
|
||||||
|
#define DOGLCD_CS P0_16 // (16)
|
||||||
|
#undef LCD_BACKLIGHT_PIN //P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
||||||
|
#undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||||||
|
#undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3
|
||||||
|
|
||||||
|
#undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2
|
||||||
|
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||||||
|
#undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2
|
||||||
|
#undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector
|
||||||
|
#define DOGLCD_SCK SCK_PIN
|
||||||
|
#define DOGLCD_MOSI MOSI_PIN
|
||||||
|
|
||||||
|
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
||||||
|
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
|
||||||
|
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
|
||||||
|
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
|
||||||
|
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
|
||||||
|
|
||||||
|
#if ENABLED(MINIPANEL)
|
||||||
|
// GLCD features
|
||||||
|
//#define LCD_CONTRAST 190
|
||||||
|
// Uncomment screen orientation
|
||||||
|
//#define LCD_SCREEN_ROT_90
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
//#define LCD_SCREEN_ROT_270
|
||||||
|
#endif
|
||||||
|
|
||||||
#if ENABLED(MINIPANEL)
|
|
||||||
// GLCD features
|
|
||||||
//#define LCD_CONTRAST 190
|
|
||||||
// Uncomment screen orientation
|
|
||||||
//#define LCD_SCREEN_ROT_90
|
|
||||||
//#define LCD_SCREEN_ROT_180
|
|
||||||
//#define LCD_SCREEN_ROT_270
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif // ULTRA_LCD
|
#endif // ULTRA_LCD
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user