melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Only set up SPI pins as needed (#19372)

Browse Source
2.0.x
Victor Oliveira 4 years ago committed by GitHub
parent 648e7f73a5
commit 79d4123319
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 54 additions and 50 deletions
Show Stats Download Patch File Download Diff File

104
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
Unescape Escape View File

@ -39,10 +39,10 @@
* Some of the LCD interfaces/adapters result in the LCD SPI and the SD card
* SPI sharing pins. The SCK, MOSI & MISO pins can NOT be set/cleared with
* WRITE nor digitalWrite when the hardware SPI module within the LPC17xx is
* active. If any of these pins are shared then the software SPI must be used.
* active. If any of these pins are shared then the software SPI must be used.
*
* A more sophisticated hardware SPI can be found at the following link. This
* implementation has not been fully debugged.
* A more sophisticated hardware SPI can be found at the following link.
* This implementation has not been fully debugged.
* https://github.com/MarlinFirmware/Marlin/tree/071c7a78f27078fd4aee9a3ef365fcf5e143531e
*/
@ -170,34 +170,20 @@ static inline void waitSpiTxEnd(LPC_SSP_TypeDef *spi_d) {
while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ } // wait until BSY=0
}
// Retain the pin init state of the SPI, to avoid init more than once,
// even if more instances of SPIClass exist
static bool spiInitialised[BOARD_NR_SPI] = { false };
SPIClass::SPIClass(uint8_t device) {
// Init things specific to each SPI device
// clock divider setup is a bit of hack, and needs to be improved at a later date.
PINSEL_CFG_Type PinCfg; // data structure to hold init values
#if BOARD_NR_SPI >= 1
_settings[0].spi_d = LPC_SSP0;
_settings[0].dataMode = SPI_MODE0;
_settings[0].dataSize = DATA_SIZE_8BIT;
_settings[0].clock = SPI_CLOCK_MAX;
// _settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI1_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_MOSI_PIN);
//_settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
#endif
#if BOARD_NR_SPI >= 2
@ -205,34 +191,53 @@ SPIClass::SPIClass(uint8_t device) {
_settings[1].dataMode = SPI_MODE0;
_settings[1].dataSize = DATA_SIZE_8BIT;
_settings[1].clock = SPI_CLOCK_MAX;
// _settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI2_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_MOSI_PIN);
//_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
#endif
setModule(device);
/* Initialize GPDMA controller */
//TODO: call once in the constructor? or each time?
// Init the GPDMA controller
// TODO: call once in the constructor? or each time?
GPDMA_Init();
}
void SPIClass::begin() {
// Init the SPI pins in the first begin call
if ((_currentSetting->spi_d == LPC_SSP0 && spiInitialised[0] == false) ||
(_currentSetting->spi_d == LPC_SSP1 && spiInitialised[1] == false)) {
pin_t sck, miso, mosi;
if (_currentSetting->spi_d == LPC_SSP0) {
sck = BOARD_SPI1_SCK_PIN;
miso = BOARD_SPI1_MISO_PIN;
mosi = BOARD_SPI1_MOSI_PIN;
spiInitialised[0] = true;
}
else if (_currentSetting->spi_d == LPC_SSP1) {
sck = BOARD_SPI2_SCK_PIN;
miso = BOARD_SPI2_MISO_PIN;
mosi = BOARD_SPI2_MOSI_PIN;
spiInitialised[1] = true;
}
PINSEL_CFG_Type PinCfg; // data structure to hold init values
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(sck);
PinCfg.Portnum = LPC176x::pin_port(sck);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(sck);
PinCfg.Pinnum = LPC176x::pin_bit(miso);
PinCfg.Portnum = LPC176x::pin_port(miso);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(miso);
PinCfg.Pinnum = LPC176x::pin_bit(mosi);
PinCfg.Portnum = LPC176x::pin_port(mosi);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(mosi);
}
updateSettings();
SSP_Cmd(_currentSetting->spi_d, ENABLE); // start SSP running
}
@ -246,7 +251,7 @@ void SPIClass::beginTransaction(const SPISettings &cfg) {
}
uint8_t SPIClass::transfer(const uint16_t b) {
/* send and receive a single byte */
// Send and receive a single byte
SSP_ReceiveData(_currentSetting->spi_d); // read any previous data
SSP_SendData(_currentSetting->spi_d, b);
waitSpiTxEnd(_currentSetting->spi_d); // wait for it to finish
@ -254,8 +259,7 @@ uint8_t SPIClass::transfer(const uint16_t b) {
}
uint16_t SPIClass::transfer16(const uint16_t data) {
return (transfer((data >> 8) & 0xFF) << 8)
| (transfer(data & 0xFF) & 0xFF);
return (transfer((data >> 8) & 0xFF) << 8) | (transfer(data & 0xFF) & 0xFF);
}
void SPIClass::end() {
@ -294,23 +298,23 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// Enable dma on SPI
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
// only increase memory if minc is true
// Only increase memory if minc is true
GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
// Setup channel with given parameter
GPDMA_Setup(&GPDMACfg);
// enabled dma
// Enable DMA
GPDMA_ChannelCmd(0, ENABLE);
// wait data transfer
// Wait for data transfer
while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
// clear err and int
// Clear err and int
GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
// dma disable
// Disable DMA
GPDMA_ChannelCmd(0, DISABLE);
waitSpiTxEnd(_currentSetting->spi_d);

Write Preview
Loading…
Cancel
Save