Update test scripts to error on unknown (#16229)

Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h

@@ -68,3 +68,7 @@
 #if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
   #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI"
 #endif
+
+#if ENABLED(BAUD_RATE_GCODE)
+  #error "BAUD_RATE_GCODE is not yet supported on LPC176x."
+#endif

buildroot/bin/opt_disable

@@ -1,11 +1,13 @@
 #!/usr/bin/env bash
 
+# exit on first failure
+set -e
+
 SED=$(which gsed || which sed)
 
 for opt in "$@" ; do
-  eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration.h"
+  # Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
-done
+  eval "${SED} -i '/\([[:blank:]]*\)\(\/\/\)*\([[:blank:]]*\)\(#define \b${opt}\b\)/{s//\1\3\/\/\4/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
-
+  eval "${SED} -i '/\([[:blank:]]*\)\(\/\/\)*\([[:blank:]]*\)\(#define \b${opt}\b\)/{s//\1\3\/\/\4/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
-for opt in "$@" ; do
+  (echo "ERROR: opt_disable Can't find ${opt}" >&2 && exit 9)
-  eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration_adv.h"
 done

buildroot/bin/opt_enable

@@ -1,11 +1,13 @@
 #!/usr/bin/env bash
 
+# exit on first failure
+set -e
+
 SED=$(which gsed || which sed)
 
 for opt in "$@" ; do
-  eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration.h"
+  # Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
-done
+  eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
-
+  eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
-for opt in "$@" ; do
+  (echo "ERROR: opt_enable Can't find ${opt}" >&2 && exit 9)
-  eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration_adv.h"
 done

buildroot/bin/opt_set

@@ -1,6 +1,11 @@
 #!/usr/bin/env bash
 
+# exit on first failure
+set -e
+
 SED=$(which gsed || which sed)
 
-eval "${SED} -E -i 's/(\/\/)?(#define \b${1}\b).*$/\2 ${2}/g' Marlin/Configuration.h"
+# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
-eval "${SED} -E -i 's/(\/\/)?(#define \b${1}\b).*$/\2 ${2}/g' Marlin/Configuration_adv.h"
+eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define \b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
+eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define \b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
+(echo "ERROR: opt_set Can't find ${1}" >&2 && exit 9)

buildroot/bin/pins_set

@@ -7,4 +7,5 @@ PIN=$2
 VAL=$3
 
 SED=$(which gsed || which sed)
-eval "${SED} -E -i 's/(\/\/)?(#define +${PIN}\b).*$/\2 ${VAL}/g' Marlin/src/pins/$DIR/pins_${NAM}.h"
+eval "${SED} -i '/\(\/\/\)*\(#define \+${PIN}\b\).*$/{s//\2 ${VAL}/;h};\${x;/./{x;q0};x;q9}' Marlin/src/pins/$DIR/pins_${NAM}.h" ||
+(echo "ERROR: pins_set Can't find ${PIN}" >&2 && exit 9)

buildroot/share/tests/LPC1768-tests

@@ -15,7 +15,7 @@ set -e
 
 restore_configs
 opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
-opt_enable VIKI2 SDSUPPORT SERIAL_PORT2 NEOPIXEL_LED BAUD_RATE_GCODE
+opt_enable VIKI2 SDSUPPORT SERIAL_PORT_2 NEOPIXEL_LED
 opt_set NEOPIXEL_PIN P1_16
 exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel"
 

buildroot/share/tests/LPC1769-tests

@@ -21,7 +21,7 @@ opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
            FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
            BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
-           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE BAUD_RATE_GCODE \
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
            LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
 opt_set GRID_MAX_POINTS_X 16
 exec_test $1 $2 "Smoothieboard with many features"
@@ -33,8 +33,8 @@ exec_test $1 $2 "Smoothieboard with many features"
 #           AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
 #           FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
 #           SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
-#           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS BAUD_RATE_GCODE \
+#           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \
-#           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
+#           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS \
 #           EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
 #opt_set FAN_MIN_PWM 50
 #opt_set FAN_KICKSTART_TIME 100
@@ -47,7 +47,7 @@ opt_set MOTHERBOARD BOARD_COHESION3D_REMIX
 opt_set X_DRIVER_TYPE TMC2130
 opt_set Y_DRIVER_TYPE TMC2130
 opt_set Z_DRIVER_TYPE TMC2130
-opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT BAUD_RATE_GCODE \
+opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT \
            TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
            SENSORLESS_PROBING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG
 opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN PSU_CONTROL

buildroot/share/tests/esp32-tests

@@ -12,8 +12,8 @@ set -e
 restore_configs
 opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32
 opt_enable WIFISUPPORT GCODE_MACROS BAUD_RATE_GCODE
-opt_set "WIFI_SSID \"ssid\""
+opt_set WIFI_SSID "\"ssid\""
-opt_set "WIFI_PWD \"password\""
+opt_set WIFI_PWD "\"password\""
 opt_set TX_BUFFER_SIZE 64
 opt_add WEBSUPPORT
 exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT"

buildroot/share/tests/megaatmega2560-tests

@@ -117,11 +117,13 @@ opt_set LCD_LANGUAGE de
 opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT \
            ULTIMAKERCONTROLLER SDSUPPORT PCA9632 LCD_INFO_MENU \
            AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY LCD_BED_LEVELING G26_MESH_VALIDATION MESH_EDIT_MENU \
-           M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR \
+           M100_FREE_MEMORY_WATCHER \
            INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS \
            NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
            ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \
            PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 M114_DETAIL
+opt_add M100_FREE_MEMORY_DUMPER
+opt_add M100_FREE_MEMORY_CORRUPTOR
 opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
 opt_set I2C_SLAVE_ADDRESS 63
 exec_test $1 $2 "MINIRAMBO | Ultimaker LCD | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..."
@@ -179,7 +181,7 @@ opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
            FIX_MOUNTED_PROBE AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE FILAMENT_WIDTH_SENSOR \
            SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
            SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \
-           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL EXTRA_FAN_SPEED FWRETRACT
+           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT
 opt_set FAN_MIN_PWM 50
 opt_set FAN_KICKSTART_TIME 100
 opt_set XY_FREQUENCY_LIMIT 15
@@ -295,7 +297,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
 # Delta Config (generic) + ABL bilinear + BLTOUCH
 use_example_configs delta/generic
 opt_set LCD_LANGUAGE cz
-opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_FORCE_5V_MODE
+opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH
 exec_test $1 $2 "RAMPS | DELTA | RRD LCD | ABL Bilinear | BLTOUCH"
 
 #