diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bitmaps.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bitmaps.h index 59394b89a6..c194225d99 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bitmaps.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/bitmaps.h @@ -256,4 +256,4 @@ namespace Theme { constexpr PROGMEM uint32_t UTF8_FONT_OFFSET = 10000; constexpr PROGMEM uint32_t BACKGROUND_OFFSET = 40000; -}; // namespace Theme +} // namespace Theme diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.cpp index 1ed712ded1..efeed19201 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.cpp @@ -385,7 +385,7 @@ namespace Theme { {CHACK}, {SILENCE, END_SONG, 0} }; -}; // namespace Theme +} // namespace Theme #define N_ELEMENTS(a) (sizeof(a)/sizeof(a[0])) diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.h index 66c1cb810c..0ca78d4b62 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/sounds.h @@ -40,4 +40,4 @@ namespace Theme { extern const PROGMEM SoundPlayer::sound_t warble[]; extern const PROGMEM SoundPlayer::sound_t carousel[]; extern const PROGMEM SoundPlayer::sound_t all_instruments[]; -}; // namespace Theme +} // namespace Theme diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 7d0ff7320f..4669f0c233 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -177,9 +177,6 @@ namespace Language_an { LSTR MSG_ERR_MINTEMP = _UxGT("Error: Temp Min"); LSTR MSG_HALTED = _UxGT("IMPRESORA ATURADA"); LSTR MSG_PLEASE_RESET = _UxGT("Per favor reinic."); - LSTR MSG_SHORT_DAY = _UxGT("d"); - LSTR MSG_SHORT_HOUR = _UxGT("h"); - LSTR MSG_SHORT_MINUTE = _UxGT("m"); LSTR MSG_HEATING = _UxGT("Calentando..."); LSTR MSG_BED_HEATING = _UxGT("Calentando base..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Calibracion Delta"); diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index 06db1e8186..c8f0d26a32 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -165,9 +165,6 @@ namespace Language_ca { LSTR MSG_ERR_MINTEMP = _UxGT("Err: TEMP MINIMA"); LSTR MSG_HALTED = _UxGT("IMPRESSORA PARADA"); LSTR MSG_PLEASE_RESET = _UxGT("Reinicieu"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Escalfant..."); LSTR MSG_BED_HEATING = _UxGT("Escalfant llit..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Calibratge Delta"); diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index 0e10cd4be0..2ee0534f9d 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -420,9 +420,6 @@ namespace Language_cz { LSTR MSG_ERR_MINTEMP = _UxGT("NÍZKA TEPLOTA"); LSTR MSG_HALTED = _UxGT("TISK. ZASTAVENA"); LSTR MSG_PLEASE_RESET = _UxGT("Proveďte reset"); - LSTR MSG_SHORT_DAY = _UxGT("d"); - LSTR MSG_SHORT_HOUR = _UxGT("h"); - LSTR MSG_SHORT_MINUTE = _UxGT("m"); LSTR MSG_HEATING = _UxGT("Zahřívání..."); LSTR MSG_COOLING = _UxGT("Chlazení..."); #if LCD_WIDTH >= 20 @@ -602,12 +599,6 @@ namespace Language_cz { LSTR MSG_SERVICE_RESET = _UxGT("Reset"); LSTR MSG_SERVICE_IN = _UxGT(" za:"); LSTR MSG_BACKLASH = _UxGT("Vůle"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korekce"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Vyhlazení"); } diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index 4ce6089442..ef11906ed6 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -144,9 +144,6 @@ namespace Language_da { LSTR MSG_ERR_MINTEMP = _UxGT("Fejl: Min temp"); LSTR MSG_HALTED = _UxGT("PRINTER STOPPET"); LSTR MSG_PLEASE_RESET = _UxGT("Reset Venligst"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // Kun et bogstav - LSTR MSG_SHORT_HOUR = _UxGT("h"); // Kun et bogstav - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // Kun et bogstav LSTR MSG_HEATING = _UxGT("Opvarmer..."); LSTR MSG_BED_HEATING = _UxGT("Opvarmer plade..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Kalibrering"); diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index 4c8b5e5af9..4aef4ac45c 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -35,7 +35,6 @@ namespace Language_de { LSTR LANGUAGE = _UxGT("Deutsch"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" bereit"); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("JA"); LSTR MSG_NO = _UxGT("NEIN"); LSTR MSG_BACK = _UxGT("Zurück"); @@ -630,12 +629,6 @@ namespace Language_de { LSTR MSG_SERVICE_RESET = _UxGT("Reset"); LSTR MSG_SERVICE_IN = _UxGT(" im:"); LSTR MSG_BACKLASH = _UxGT("Spiel"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrektur"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Glätten"); LSTR MSG_LEVEL_X_AXIS = _UxGT("X Achse leveln"); diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 520b5f7b21..85c689222b 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -47,8 +47,8 @@ namespace Language_en { constexpr uint8_t CHARSIZE = 2; LSTR LANGUAGE = _UxGT("English"); + // These strings should be translated LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Ready."); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("YES"); LSTR MSG_NO = _UxGT("NO"); LSTR MSG_BACK = _UxGT("Back"); @@ -339,16 +339,6 @@ namespace Language_en { LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune failed. Bad extruder."); LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune failed. Temperature too high."); LSTR MSG_PID_TIMEOUT = _UxGT("Autotune failed! Timeout."); - LSTR MSG_PID_P = _UxGT("PID-P"); - LSTR MSG_PID_P_E = _UxGT("PID-P *"); - LSTR MSG_PID_I = _UxGT("PID-I"); - LSTR MSG_PID_I_E = _UxGT("PID-I *"); - LSTR MSG_PID_D = _UxGT("PID-D"); - LSTR MSG_PID_D_E = _UxGT("PID-D *"); - LSTR MSG_PID_C = _UxGT("PID-C"); - LSTR MSG_PID_C_E = _UxGT("PID-C *"); - LSTR MSG_PID_F = _UxGT("PID-F"); - LSTR MSG_PID_F_E = _UxGT("PID-F *"); LSTR MSG_SELECT = _UxGT("Select"); LSTR MSG_SELECT_E = _UxGT("Select *"); LSTR MSG_ACC = _UxGT("Accel"); @@ -542,9 +532,6 @@ namespace Language_en { LSTR MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP"); LSTR MSG_HALTED = _UxGT("PRINTER HALTED"); LSTR MSG_PLEASE_RESET = _UxGT("Please Reset"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Heating..."); LSTR MSG_COOLING = _UxGT("Cooling..."); LSTR MSG_BED_HEATING = _UxGT("Bed Heating..."); @@ -727,12 +714,6 @@ namespace Language_en { LSTR MSG_SERVICE_RESET = _UxGT("Reset"); LSTR MSG_SERVICE_IN = _UxGT(" in:"); LSTR MSG_BACKLASH = _UxGT("Backlash"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Correction"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Smoothing"); @@ -764,6 +745,28 @@ namespace Language_en { LSTR MSG_SD_CARD = _UxGT("SD Card"); LSTR MSG_USB_DISK = _UxGT("USB Disk"); + + // These strings can be the same in all languages + LSTR MSG_MARLIN = _UxGT("Marlin"); + LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only + LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only + LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only + LSTR MSG_PID_P = _UxGT("PID-P"); + LSTR MSG_PID_P_E = _UxGT("PID-P *"); + LSTR MSG_PID_I = _UxGT("PID-I"); + LSTR MSG_PID_I_E = _UxGT("PID-I *"); + LSTR MSG_PID_D = _UxGT("PID-D"); + LSTR MSG_PID_D_E = _UxGT("PID-D *"); + LSTR MSG_PID_C = _UxGT("PID-C"); + LSTR MSG_PID_C_E = _UxGT("PID-C *"); + LSTR MSG_PID_F = _UxGT("PID-F"); + LSTR MSG_PID_F_E = _UxGT("PID-F *"); + LSTR MSG_BACKLASH_A = LCD_STR_A; + LSTR MSG_BACKLASH_B = LCD_STR_B; + LSTR MSG_BACKLASH_C = LCD_STR_C; + LSTR MSG_BACKLASH_I = LCD_STR_I; + LSTR MSG_BACKLASH_J = LCD_STR_J; + LSTR MSG_BACKLASH_K = LCD_STR_K; } #if FAN_COUNT == 1 diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index 65930e6564..315a8413df 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -35,7 +35,6 @@ namespace Language_es { LSTR LANGUAGE = _UxGT("Spanish"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Lista"); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("SI"); LSTR MSG_NO = _UxGT("NO"); LSTR MSG_BACK = _UxGT("Atrás"); @@ -427,9 +426,6 @@ namespace Language_es { LSTR MSG_ERR_MINTEMP = _UxGT("Err:TEMP. MIN"); LSTR MSG_HALTED = _UxGT("IMPRESORA DETENIDA"); LSTR MSG_PLEASE_RESET = _UxGT("Por favor, reinicie"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Calentando..."); LSTR MSG_COOLING = _UxGT("Enfriando..."); LSTR MSG_BED_HEATING = _UxGT("Calentando Cama..."); @@ -588,12 +584,6 @@ namespace Language_es { LSTR MSG_SERVICE_RESET = _UxGT("Reiniciar"); LSTR MSG_SERVICE_IN = _UxGT(" dentro:"); LSTR MSG_BACKLASH = _UxGT("Backlash"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Corrección"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Suavizado"); diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index a7e5bb2c58..fc8f2e0f62 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -252,9 +252,6 @@ namespace Language_eu { LSTR MSG_ERR_MINTEMP = _UxGT("Err: Tenp Minimoa"); LSTR MSG_HALTED = _UxGT("INPRIMA. GELDIRIK"); LSTR MSG_PLEASE_RESET = _UxGT("Berrabia. Mesedez"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Berotzen..."); LSTR MSG_BED_HEATING = _UxGT("Ohea Berotzen..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Kalibraketa"); diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 46dd712ec2..be8daaa3dc 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -625,12 +625,6 @@ namespace Language_fr { LSTR MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop activé"); LSTR MSG_SERVICE_RESET = _UxGT("Réinit."); LSTR MSG_SERVICE_IN = _UxGT(" dans:"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Correction"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Lissage"); diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 54a323034e..ad85ac9b48 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -37,7 +37,6 @@ namespace Language_gl { LSTR LANGUAGE = _UxGT("Galician"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" lista."); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("SI"); LSTR MSG_NO = _UxGT("NON"); LSTR MSG_BACK = _UxGT("Atrás"); @@ -443,9 +442,6 @@ namespace Language_gl { LSTR MSG_ERR_MINTEMP = _UxGT("Erro:TEMP MÍN"); LSTR MSG_HALTED = _UxGT("IMPRESORA DETIDA"); LSTR MSG_PLEASE_RESET = _UxGT("Debe reiniciar!"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Quentando..."); LSTR MSG_COOLING = _UxGT("Arrefriando..."); LSTR MSG_BED_HEATING = _UxGT("Quentando cama..."); @@ -605,12 +601,6 @@ namespace Language_gl { LSTR MSG_SERVICE_RESET = _UxGT("Reiniciar"); LSTR MSG_SERVICE_IN = _UxGT(" dentro:"); LSTR MSG_BACKLASH = _UxGT("Reacción"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Corrección"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Suavizado"); diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h index f0da04b063..e828b489f6 100644 --- a/Marlin/src/lcd/language/language_hr.h +++ b/Marlin/src/lcd/language/language_hr.h @@ -166,6 +166,5 @@ namespace Language_hr { #else // Up to 2 lines allowed LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT("Pričekaj..."); - //LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("?", "?")); #endif } diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h index 83e58de158..2c06a51c19 100644 --- a/Marlin/src/lcd/language/language_hu.h +++ b/Marlin/src/lcd/language/language_hu.h @@ -40,7 +40,6 @@ namespace Language_hu { LSTR LANGUAGE = _UxGT("Magyar"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Kész."); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("IGEN"); LSTR MSG_NO = _UxGT("NEM"); LSTR MSG_BACK = _UxGT("Vissza"); @@ -317,16 +316,6 @@ namespace Language_hu { LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Hangolási hiba. Rossz adagoló."); LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Hangolási hiba. Magas hömérséklet."); LSTR MSG_PID_TIMEOUT = _UxGT("Hangolási hiba! Idötúllépés."); - LSTR MSG_PID_P = _UxGT("PID-P"); - LSTR MSG_PID_P_E = _UxGT("PID-P *"); - LSTR MSG_PID_I = _UxGT("PID-I"); - LSTR MSG_PID_I_E = _UxGT("PID-I *"); - LSTR MSG_PID_D = _UxGT("PID-D"); - LSTR MSG_PID_D_E = _UxGT("PID-D *"); - LSTR MSG_PID_C = _UxGT("PID-C"); - LSTR MSG_PID_C_E = _UxGT("PID-C *"); - LSTR MSG_PID_F = _UxGT("PID-F"); - LSTR MSG_PID_F_E = _UxGT("PID-F *"); LSTR MSG_SELECT = _UxGT("Kiválaszt"); LSTR MSG_SELECT_E = _UxGT("Kiválaszt *"); LSTR MSG_ACC = _UxGT("Gyorsítás"); @@ -703,12 +692,6 @@ namespace Language_hu { LSTR MSG_SERVICE_RESET = _UxGT("Újraindítás"); LSTR MSG_SERVICE_IN = _UxGT(" be:"); LSTR MSG_BACKLASH = _UxGT("Holtjáték"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrekció"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Simítás"); diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index c8ee795e61..e005567985 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -44,7 +44,6 @@ namespace Language_it { LSTR LANGUAGE = _UxGT("Italiano"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" pronta."); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("Si"); LSTR MSG_NO = _UxGT("No"); LSTR MSG_BACK = _UxGT("Indietro"); @@ -700,12 +699,6 @@ namespace Language_it { LSTR MSG_SERVICE_IN = _UxGT(" tra:"); LSTR MSG_BACKLASH = _UxGT("Gioco"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Correzione"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Appianamento"); diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h index 5864280dd5..1d291ed3ad 100644 --- a/Marlin/src/lcd/language/language_jp_kana.h +++ b/Marlin/src/lcd/language/language_jp_kana.h @@ -192,9 +192,6 @@ namespace Language_jp_kana { LSTR MSG_ERR_MINTEMP = _UxGT("エラー:サイテイオンミマン"); // "Err: MINTEMP" LSTR MSG_HALTED = _UxGT("プリンターハテイシシマシタ"); // "PRINTER HALTED" LSTR MSG_PLEASE_RESET = _UxGT("リセットシテクダサイ"); // "Please reset" - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("カネツチュウ"); // "Heating..." LSTR MSG_BED_HEATING = _UxGT("ベッド カネツチュウ"); // "Bed Heating..." LSTR MSG_DELTA_CALIBRATE = _UxGT("デルタ コウセイ"); // "Delta Calibration" diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index 786fa88298..b44d09d07c 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -166,9 +166,6 @@ namespace Language_nl { LSTR MSG_ERR_MINTEMP = _UxGT("Err: Min. temp"); LSTR MSG_HALTED = _UxGT("PRINTER GESTOPT"); LSTR MSG_PLEASE_RESET = _UxGT("Reset A.U.B."); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only. Keep English standard - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Voorwarmen..."); LSTR MSG_BED_HEATING = _UxGT("Bed voorverw..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Calibratie"); diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 3e19150a77..b37e1d80cf 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -44,7 +44,6 @@ namespace Language_pl { LSTR LANGUAGE = _UxGT("Polski"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" gotowy."); - //LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("TAK"); LSTR MSG_NO = _UxGT("NIE"); LSTR MSG_BACK = _UxGT("Wstecz"); @@ -56,7 +55,6 @@ namespace Language_pl { LSTR MSG_MEDIA_READ_ERROR = _UxGT("Bład odczytu karty"); LSTR MSG_MEDIA_USB_REMOVED = _UxGT("Urządzenie USB usunięte"); LSTR MSG_MEDIA_USB_FAILED = _UxGT("Błąd uruchomienia USB"); - //LSTR MSG_KILL_SUBCALL_OVERFLOW = _UxGT("Subcall Overflow"); LSTR MSG_LCD_ENDSTOPS = _UxGT("Krańców."); // Max length 8 characters LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Progr. Krańcówki"); LSTR MSG_MAIN = _UxGT("Menu główne"); @@ -71,7 +69,6 @@ namespace Language_pl { LSTR MSG_AUTO_HOME_Y = _UxGT("Zeruj Y"); LSTR MSG_AUTO_HOME_Z = _UxGT("Zeruj Z"); LSTR MSG_AUTO_Z_ALIGN = _UxGT("Autowyrównanie Z"); - //LSTR MSG_ITERATION = _UxGT("G34 Iteration: %i"); LSTR MSG_DECREASING_ACCURACY = _UxGT("Spadek dokładności!"); LSTR MSG_ACCURACY_ACHIEVED = _UxGT("Osiągnięto dokładność"); LSTR MSG_LEVEL_BED_HOMING = _UxGT("Pozycja zerowa"); @@ -80,12 +77,8 @@ namespace Language_pl { LSTR MSG_LEVEL_BED_DONE = _UxGT("Wypoziomowano!"); LSTR MSG_Z_FADE_HEIGHT = _UxGT("Wys. zanikania"); LSTR MSG_SET_HOME_OFFSETS = _UxGT("Ust. poz. zer."); - //LSTR MSG_HOME_OFFSET_X = _UxGT("Home Offset X"); - //LSTR MSG_HOME_OFFSET_Y = _UxGT("Home Offset Y"); - //LSTR MSG_HOME_OFFSET_Z = _UxGT("Home Offset Z"); LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("Poz. zerowa ust."); LSTR MSG_SET_ORIGIN = _UxGT("Ustaw punkt zero"); - //LSTR MSG_TRAMMING_WIZARD = _UxGT("Tramming Wizard"); LSTR MSG_SELECT_ORIGIN = _UxGT("Wybierz punkt zero"); LSTR MSG_LAST_VALUE_SP = _UxGT("Poprzednia wartość "); #if PREHEAT_COUNT @@ -113,15 +106,6 @@ namespace Language_pl { LSTR MSG_SPINDLE_MENU = _UxGT("Sterowanie wrzeciona"); LSTR MSG_LASER_POWER = _UxGT("Zasilanie Lasera"); LSTR MSG_SPINDLE_POWER = _UxGT("Zasilanie wrzeciona"); - //LSTR MSG_LASER_TOGGLE = _UxGT("Toggle Laser"); - //LSTR MSG_LASER_EVAC_TOGGLE = _UxGT("Toggle Blower"); - //LSTR MSG_LASER_ASSIST_TOGGLE = _UxGT("Air Assist"); - //LSTR MSG_LASER_PULSE_MS = _UxGT("Test Pulse ms"); - //LSTR MSG_LASER_FIRE_PULSE = _UxGT("Fire Pulse"); - //LSTR MSG_FLOWMETER_FAULT = _UxGT("Coolant Flow Fault"); - //LSTR MSG_SPINDLE_TOGGLE = _UxGT("Toggle Spindle"); - //LSTR MSG_SPINDLE_EVAC_TOGGLE = _UxGT("Toggle Vacuum"); - //LSTR MSG_SPINDLE_FORWARD = _UxGT("Spindle Forward"); LSTR MSG_SPINDLE_REVERSE = _UxGT("Rewers wrzeciona"); LSTR MSG_SWITCH_PS_ON = _UxGT("Włącz zasilacz"); LSTR MSG_SWITCH_PS_OFF = _UxGT("Wyłącz zasilacz"); @@ -131,10 +115,6 @@ namespace Language_pl { LSTR MSG_BED_LEVELING = _UxGT("Poziomowanie stołu"); LSTR MSG_LEVEL_BED = _UxGT("Wypoziomuj stół"); LSTR MSG_BED_TRAMMING = _UxGT("Narożniki poziomowania"); - //LSTR MSG_BED_TRAMMING_RAISE = _UxGT("Raise Bed Until Probe Triggered"); - //LSTR MSG_BED_TRAMMING_IN_RANGE = _UxGT("All Corners Within Tolerance. Level Bed"); - //LSTR MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Good Points: "); - //LSTR MSG_BED_TRAMMING_LAST_Z = _UxGT("Last Z: "); LSTR MSG_NEXT_CORNER = _UxGT("Nastepny narożnik"); LSTR MSG_MESH_EDITOR = _UxGT("Edytor siatki"); LSTR MSG_EDIT_MESH = _UxGT("Edycja siatki"); @@ -146,7 +126,6 @@ namespace Language_pl { LSTR MSG_CUSTOM_COMMANDS = _UxGT("Własne Polecenia"); LSTR MSG_M48_TEST = _UxGT("M48 Test sondy"); LSTR MSG_M48_POINT = _UxGT("M48 Punky"); - //LSTR MSG_M48_OUT_OF_BOUNDS = _UxGT("Probe out of bounds"); LSTR MSG_M48_DEVIATION = _UxGT("Odchylenie"); LSTR MSG_IDEX_MENU = _UxGT("Tryb IDEX"); LSTR MSG_OFFSETS_MENU = _UxGT("Przesunięcie narzędzia"); @@ -154,16 +133,13 @@ namespace Language_pl { LSTR MSG_IDEX_MODE_DUPLICATE = _UxGT("Duplikowanie"); LSTR MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("Kopia lustrzana"); LSTR MSG_IDEX_MODE_FULL_CTRL = _UxGT("Pełne sterowanie"); - //LSTR MSG_IDEX_DUPE_GAP = _UxGT("Duplicate X-Gap"); LSTR MSG_HOTEND_OFFSET_X = _UxGT("2ga dysza X"); LSTR MSG_HOTEND_OFFSET_Y = _UxGT("2ga dysza Y"); LSTR MSG_HOTEND_OFFSET_Z = _UxGT("2ga dysza Z"); LSTR MSG_UBL_DOING_G29 = _UxGT("Wykonywanie G29"); LSTR MSG_UBL_TOOLS = _UxGT("Narzędzia UBL"); - //LSTR MSG_UBL_LEVEL_BED = _UxGT("Unified Bed Leveling"); LSTR MSG_LCD_TILTING_MESH = _UxGT("Punkt pochylenia"); LSTR MSG_UBL_MANUAL_MESH = _UxGT("Ręczne Budowanie Siatki"); - //LSTR MSG_UBL_MESH_WIZARD = _UxGT("UBL Mesh Wizard"); LSTR MSG_UBL_BC_INSERT = _UxGT("Umieść podkładkę i zmierz"); LSTR MSG_UBL_BC_INSERT2 = _UxGT("Zmierz"); LSTR MSG_UBL_BC_REMOVE = _UxGT("Usuń & Zmierz Stół"); @@ -247,8 +223,6 @@ namespace Language_pl { LSTR MSG_SET_LEDS_WHITE = _UxGT("Biały"); LSTR MSG_SET_LEDS_DEFAULT = _UxGT("Domyślny"); LSTR MSG_LED_CHANNEL_N = _UxGT("Kanał ="); - //LSTR MSG_LEDS2 = _UxGT("Lights #2"); - //LSTR MSG_NEO2_PRESETS = _UxGT("Light #2 Presets"); LSTR MSG_NEO2_BRIGHTNESS = _UxGT("Jasność"); LSTR MSG_CUSTOM_LEDS = _UxGT("Własne światła"); LSTR MSG_INTENSITY_R = _UxGT("Czerwony"); @@ -277,29 +251,17 @@ namespace Language_pl { LSTR MSG_BED_Z = _UxGT("Stół Z"); LSTR MSG_NOZZLE = _UxGT("Dysza"); LSTR MSG_NOZZLE_N = _UxGT("Dysza ~"); - //LSTR MSG_NOZZLE_PARKED = _UxGT("Nozzle Parked"); LSTR MSG_NOZZLE_STANDBY = _UxGT("Dysza w oczekiwaniu"); LSTR MSG_BED = _UxGT("Stół"); LSTR MSG_CHAMBER = _UxGT("Obudowa"); - //LSTR MSG_COOLER = _UxGT("Laser Coolant"); - //LSTR MSG_COOLER_TOGGLE = _UxGT("Toggle Cooler"); - //LSTR MSG_FLOWMETER_SAFETY = _UxGT("Flow Safety"); - //LSTR MSG_LASER = _UxGT("Laser"); LSTR MSG_FAN_SPEED = _UxGT("Obroty wentylatora"); LSTR MSG_FAN_SPEED_N = _UxGT("Obroty wentylatora ~"); - //LSTR MSG_STORED_FAN_N = _UxGT("Stored Fan ~"); LSTR MSG_EXTRA_FAN_SPEED = _UxGT("Obroty dodatkowego wentylatora"); LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("Obroty dodatkowego wentylatora ~"); LSTR MSG_CONTROLLER_FAN = _UxGT("Wentylator kontrolera"); - //LSTR MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("Idle Speed"); - //LSTR MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("Auto Mode"); - //LSTR MSG_CONTROLLER_FAN_SPEED = _UxGT("Active Speed"); - //LSTR MSG_CONTROLLER_FAN_DURATION = _UxGT("Idle Period"); LSTR MSG_FLOW = _UxGT("Przepływ"); LSTR MSG_FLOW_N = _UxGT("Przepływ ~"); LSTR MSG_CONTROL = _UxGT("Ustawienia"); - //LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min"); - //LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max"); LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Mnożnik"); LSTR MSG_AUTOTEMP = _UxGT("Auto. temperatura"); LSTR MSG_LCD_ON = _UxGT("Wł."); @@ -307,19 +269,6 @@ namespace Language_pl { LSTR MSG_PID_AUTOTUNE = _UxGT("PID Autostrojenie"); LSTR MSG_PID_AUTOTUNE_E = _UxGT("PID Autostrojenie *"); LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("Strojenie PID zakończone"); - //LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune failed. Bad extruder."); - //LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune failed. Temperature too high."); - //LSTR MSG_PID_TIMEOUT = _UxGT("Autotune failed! Timeout."); - //LSTR MSG_PID_P = _UxGT("PID-P"); - //LSTR MSG_PID_P_E = _UxGT("PID-P *"); - //LSTR MSG_PID_I = _UxGT("PID-I"); - //LSTR MSG_PID_I_E = _UxGT("PID-I *"); - //LSTR MSG_PID_D = _UxGT("PID-D"); - //LSTR MSG_PID_D_E = _UxGT("PID-D *"); - //LSTR MSG_PID_C = _UxGT("PID-C"); - //LSTR MSG_PID_C_E = _UxGT("PID-C *"); - //LSTR MSG_PID_F = _UxGT("PID-F"); - //LSTR MSG_PID_F_E = _UxGT("PID-F *"); LSTR MSG_SELECT = _UxGT("Wybierz"); LSTR MSG_SELECT_E = _UxGT("Wybierz *"); LSTR MSG_ACC = _UxGT("Przyspieszenie"); @@ -331,7 +280,6 @@ namespace Language_pl { LSTR MSG_VJ_JERK = _UxGT("Zryw V") LCD_STR_J; LSTR MSG_VK_JERK = _UxGT("Zryw V") LCD_STR_K; LSTR MSG_VE_JERK = _UxGT("Zryw Ve"); - //LSTR MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev"); LSTR MSG_VELOCITY = _UxGT("Prędkość (V)"); LSTR MSG_VTRAV_MIN = _UxGT("Vskok min"); @@ -340,7 +288,6 @@ namespace Language_pl { LSTR MSG_A_RETRACT = _UxGT("A-wycofanie"); LSTR MSG_A_TRAVEL = _UxGT("A-przesuń."); LSTR MSG_XY_FREQUENCY_LIMIT = _UxGT("Częstotliwość max"); - //LSTR MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Feed min"); LSTR MSG_STEPS_PER_MM = _UxGT("kroki/mm"); LSTR MSG_A_STEPS = LCD_STR_A _UxGT(" kroki/mm"); LSTR MSG_B_STEPS = LCD_STR_B _UxGT(" kroki/mm"); @@ -352,39 +299,28 @@ namespace Language_pl { LSTR MSG_EN_STEPS = _UxGT("* kroki/mm"); LSTR MSG_TEMPERATURE = _UxGT("Temperatura"); LSTR MSG_MOTION = _UxGT("Ruch"); - //LSTR MSG_FILAMENT = _UxGT("Filament"); LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E w mm") SUPERSCRIPT_THREE; - //LSTR MSG_VOLUMETRIC_LIMIT = _UxGT("E Limit in mm") SUPERSCRIPT_THREE; - //LSTR MSG_VOLUMETRIC_LIMIT_E = _UxGT("E Limit *"); LSTR MSG_FILAMENT_DIAM = _UxGT("Śr. fil."); LSTR MSG_FILAMENT_DIAM_E = _UxGT("Śr. fil. *"); LSTR MSG_FILAMENT_UNLOAD = _UxGT("Wysuń mm"); LSTR MSG_FILAMENT_LOAD = _UxGT("Wsuń mm"); - //LSTR MSG_ADVANCE_K = _UxGT("Advance K"); - //LSTR MSG_ADVANCE_K_E = _UxGT("Advance K *"); LSTR MSG_CONTRAST = _UxGT("Kontrast LCD"); LSTR MSG_STORE_EEPROM = _UxGT("Zapisz w pamięci"); LSTR MSG_LOAD_EEPROM = _UxGT("Wczytaj z pamięci"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Ustaw. fabryczne"); LSTR MSG_INIT_EEPROM = _UxGT("Initializuj EEPROM"); - //LSTR MSG_ERR_EEPROM_CRC = _UxGT("EEPROM CRC Error"); - //LSTR MSG_ERR_EEPROM_INDEX = _UxGT("EEPROM Index Error"); - //LSTR MSG_ERR_EEPROM_VERSION = _UxGT("EEPROM Version Error"); - //LSTR MSG_SETTINGS_STORED = _UxGT("Settings Stored"); LSTR MSG_MEDIA_UPDATE = _UxGT("Uaktualnij kartę"); LSTR MSG_RESET_PRINTER = _UxGT("Resetuj drukarkę"); LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Odswież"); LSTR MSG_INFO_SCREEN = _UxGT("Ekran główny"); LSTR MSG_PREPARE = _UxGT("Przygotuj"); LSTR MSG_TUNE = _UxGT("Strojenie"); - //LSTR MSG_POWER_MONITOR = _UxGT("Power monitor"); LSTR MSG_CURRENT = _UxGT("Natężenie"); LSTR MSG_VOLTAGE = _UxGT("Napięcie"); LSTR MSG_POWER = _UxGT("Moc"); LSTR MSG_START_PRINT = _UxGT("Start wydruku"); LSTR MSG_BUTTON_NEXT = _UxGT("Następny"); LSTR MSG_BUTTON_INIT = _UxGT("Inic."); - //LSTR MSG_BUTTON_STOP = _UxGT("Stop"); LSTR MSG_BUTTON_PRINT = _UxGT("Drukuj"); LSTR MSG_BUTTON_RESET = _UxGT("Resetuj"); LSTR MSG_BUTTON_IGNORE = _UxGT("Ignoruj"); @@ -396,9 +332,7 @@ namespace Language_pl { LSTR MSG_PAUSING = _UxGT("Wstrzymywanie..."); LSTR MSG_PAUSE_PRINT = _UxGT("Wstrzymaj druk"); LSTR MSG_RESUME_PRINT = _UxGT("Wznowienie"); - //LSTR MSG_HOST_START_PRINT = _UxGT("Host Start"); LSTR MSG_STOP_PRINT = _UxGT("Stop"); - //LSTR MSG_END_LOOPS = _UxGT("End Repeat Loops"); LSTR MSG_PRINTING_OBJECT = _UxGT("Drukowanie obiektu"); LSTR MSG_CANCEL_OBJECT = _UxGT("Anunuj obiekt"); LSTR MSG_CANCEL_OBJECT_N = _UxGT("Anunuj obiekt ="); @@ -420,26 +354,14 @@ namespace Language_pl { LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Skok Z mm"); LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("Cof. wycof. mm"); LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Z Cof. wyc. mm"); - //LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Unretract V"); LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Cof. wycof. V"); LSTR MSG_AUTORETRACT = _UxGT("Auto. wycofanie"); LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("Długość zmiany"); - //LSTR MSG_FILAMENT_SWAP_EXTRA = _UxGT("Swap Extra"); LSTR MSG_FILAMENT_PURGE_LENGTH = _UxGT("Długość oczyszczania"); LSTR MSG_TOOL_CHANGE = _UxGT("Zmiana narzędzia"); LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Podniesienie Z"); LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Prędkość napełniania"); LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Prędkość wycofania"); - //LSTR MSG_FILAMENT_PARK_ENABLED = _UxGT("Park Head"); - //LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Recover Speed"); - //LSTR MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("Fan Speed"); - //LSTR MSG_SINGLENOZZLE_FAN_TIME = _UxGT("Fan Time"); - //LSTR MSG_TOOL_MIGRATION_ON = _UxGT("Auto ON"); - //LSTR MSG_TOOL_MIGRATION_OFF = _UxGT("Auto OFF"); - //LSTR MSG_TOOL_MIGRATION = _UxGT("Tool Migration"); - //LSTR MSG_TOOL_MIGRATION_AUTO = _UxGT("Auto-migration"); - //LSTR MSG_TOOL_MIGRATION_END = _UxGT("Last Extruder"); - //LSTR MSG_TOOL_MIGRATION_SWAP = _UxGT("Migrate to *"); LSTR MSG_FILAMENTCHANGE = _UxGT("Zmień filament"); LSTR MSG_FILAMENTCHANGE_E = _UxGT("Zmień filament *"); LSTR MSG_FILAMENTLOAD = _UxGT("Wsuń Filament"); @@ -452,35 +374,12 @@ namespace Language_pl { LSTR MSG_RELEASE_MEDIA = _UxGT("Zwolnienie karty"); LSTR MSG_ZPROBE_OUT = _UxGT("Sonda Z za stołem"); LSTR MSG_SKEW_FACTOR = _UxGT("Współczynik skrzywienia"); - //LSTR MSG_BLTOUCH = _UxGT("BLTouch"); LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Self-Test"); LSTR MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch"); - //LSTR MSG_BLTOUCH_STOW = _UxGT("Stow"); - //LSTR MSG_BLTOUCH_DEPLOY = _UxGT("Deploy"); - //LSTR MSG_BLTOUCH_SW_MODE = _UxGT("SW-Mode"); - //LSTR MSG_BLTOUCH_5V_MODE = _UxGT("5V-Mode"); - //LSTR MSG_BLTOUCH_OD_MODE = _UxGT("OD-Mode"); - //LSTR MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store"); - //LSTR MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V"); - //LSTR MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD"); - //LSTR MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain"); LSTR MSG_BLTOUCH_MODE_CHANGE = _UxGT("UWAGA: Złe ustawienia mogą uszkodzić drukarkę. Kontynuować?"); - //LSTR MSG_TOUCHMI_PROBE = _UxGT("TouchMI"); - //LSTR MSG_TOUCHMI_INIT = _UxGT("Init TouchMI"); - //LSTR MSG_TOUCHMI_ZTEST = _UxGT("Z Offset Test"); - //LSTR MSG_TOUCHMI_SAVE = _UxGT("Save"); - //LSTR MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("Deploy TouchMI"); - //LSTR MSG_MANUAL_DEPLOY = _UxGT("Deploy Z-Probe"); - //LSTR MSG_MANUAL_STOW = _UxGT("Stow Z-Probe"); LSTR MSG_HOME_FIRST = _UxGT("Najpierw Home %s%s%s"); - //LSTR MSG_ZPROBE_OFFSETS = _UxGT("Probe Offsets"); - //LSTR MSG_ZPROBE_XOFFSET = _UxGT("Probe X Offset"); - //LSTR MSG_ZPROBE_YOFFSET = _UxGT("Probe Y Offset"); LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Offset Z"); LSTR MSG_MOVE_NOZZLE_TO_BED = _UxGT("Przesuń dyszę do stołu"); - //LSTR MSG_BABYSTEP_X = _UxGT("Babystep X"); - //LSTR MSG_BABYSTEP_Y = _UxGT("Babystep Y"); - //LSTR MSG_BABYSTEP_Z = _UxGT("Babystep Z"); LSTR MSG_BABYSTEP_TOTAL = _UxGT("Łącznie"); LSTR MSG_ENDSTOP_ABORT = _UxGT("Błąd krańcówki"); LSTR MSG_HEATING_FAILED_LCD = _UxGT("Rozgrz. nieudane"); @@ -488,24 +387,17 @@ namespace Language_pl { LSTR MSG_THERMAL_RUNAWAY = _UxGT("ZANIK TEMPERATURY"); LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("ZANIK TEMP. STOŁU"); LSTR MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ZANIK TEMP.KOMORY"); - //LSTR MSG_THERMAL_RUNAWAY_COOLER = _UxGT("Cooler Runaway"); - //LSTR MSG_COOLING_FAILED = _UxGT("Cooling Failed"); LSTR MSG_ERR_MAXTEMP = _UxGT("Błąd: MAXTEMP"); LSTR MSG_ERR_MINTEMP = _UxGT("Błąd: MINTEMP"); LSTR MSG_HALTED = _UxGT("Drukarka zatrzym."); LSTR MSG_PLEASE_RESET = _UxGT("Proszę zresetować"); - //LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only LSTR MSG_SHORT_HOUR = _UxGT("g"); // One character only - //LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Rozgrzewanie..."); LSTR MSG_COOLING = _UxGT("Chłodzenie..."); LSTR MSG_BED_HEATING = _UxGT("Rozgrzewanie stołu..."); LSTR MSG_BED_COOLING = _UxGT("Chłodzenie stołu..."); - //LSTR MSG_PROBE_HEATING = _UxGT("Probe Heating..."); - //LSTR MSG_PROBE_COOLING = _UxGT("Probe Cooling..."); LSTR MSG_CHAMBER_HEATING = _UxGT("Rozgrzewanie komory..."); LSTR MSG_CHAMBER_COOLING = _UxGT("Chłodzenie komory..."); - //LSTR MSG_LASER_COOLING = _UxGT("Laser Cooling..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Kalibrowanie Delty"); LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Kalibruj X"); LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibruj Y"); @@ -523,9 +415,7 @@ namespace Language_pl { LSTR MSG_3POINT_LEVELING = _UxGT("Poziomowanie 3-punktowe"); LSTR MSG_LINEAR_LEVELING = _UxGT("Poziomowanie liniowe"); LSTR MSG_BILINEAR_LEVELING = _UxGT("Poziomowanie biliniowe"); - //LSTR MSG_UBL_LEVELING = _UxGT("Unified Bed Leveling"); LSTR MSG_MESH_LEVELING = _UxGT("Poziomowanie siatką"); - //LSTR MSG_MESH_DONE = _UxGT("Mesh probing done"); LSTR MSG_INFO_STATS_MENU = _UxGT("Statystyki"); LSTR MSG_INFO_BOARD_MENU = _UxGT("Info płyty"); LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Termistory"); @@ -534,7 +424,6 @@ namespace Language_pl { LSTR MSG_INFO_PROTOCOL = _UxGT("Protokół"); LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("Zegar pracy: OFF"); LSTR MSG_INFO_RUNAWAY_ON = _UxGT("Zegar pracy: ON"); - //LSTR MSG_HOTEND_IDLE_TIMEOUT = _UxGT("Hotend Idle Timeout"); LSTR MSG_CASE_LIGHT = _UxGT("Oświetlenie obudowy"); LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Jasność oświetlenia"); @@ -554,8 +443,6 @@ namespace Language_pl { LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Użyty fil."); #endif - //LSTR MSG_INFO_MIN_TEMP = _UxGT("Min Temp"); - //LSTR MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); LSTR MSG_INFO_PSU = _UxGT("Zasilacz"); LSTR MSG_DRIVE_STRENGTH = _UxGT("Siła silnika"); LSTR MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Siła %"); @@ -581,7 +468,6 @@ namespace Language_pl { LSTR MSG_LCD_PROBING_FAILED = _UxGT("Sondowanie nieudane"); LSTR MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("WYBIERZ FILAMENT"); - //LSTR MSG_MMU2_MENU = _UxGT("MMU"); LSTR MSG_KILL_MMU2_FIRMWARE = _UxGT("Uaktualnij firmware MMU!"); LSTR MSG_MMU2_NOT_RESPONDING = _UxGT("MMU wymaga uwagi."); LSTR MSG_MMU2_RESUME = _UxGT("Wznów wydruk"); @@ -596,7 +482,6 @@ namespace Language_pl { LSTR MSG_MMU2_EJECTING_FILAMENT = _UxGT("Wysuwanie fil. ..."); LSTR MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Wysuwanie fil...."); LSTR MSG_MMU2_ALL = _UxGT("Wszystko"); - //LSTR MSG_MMU2_FILAMENT_N = _UxGT("Filament ~"); LSTR MSG_MMU2_RESET = _UxGT("Resetuj MMU"); LSTR MSG_MMU2_RESETTING = _UxGT("Resetowanie MMU..."); LSTR MSG_MMU2_EJECT_RECOVER = _UxGT("Usuń, kliknij"); @@ -604,30 +489,12 @@ namespace Language_pl { LSTR MSG_MIX = _UxGT("Miks"); LSTR MSG_MIX_COMPONENT_N = _UxGT("Komponent ="); LSTR MSG_MIXER = _UxGT("Mikser"); - //LSTR MSG_GRADIENT = _UxGT("Gradient"); LSTR MSG_FULL_GRADIENT = _UxGT("Pełny gradient"); LSTR MSG_TOGGLE_MIX = _UxGT("Przełacz miks"); - //LSTR MSG_CYCLE_MIX = _UxGT("Cycle Mix"); - //LSTR MSG_GRADIENT_MIX = _UxGT("Gradient Mix"); LSTR MSG_REVERSE_GRADIENT = _UxGT("Odwrotny gradient"); - //LSTR MSG_ACTIVE_VTOOL = _UxGT("Active V-tool"); - //LSTR MSG_START_VTOOL = _UxGT("Start V-tool"); - //LSTR MSG_END_VTOOL = _UxGT(" End V-tool"); - //LSTR MSG_GRADIENT_ALIAS = _UxGT("Alias V-tool"); - //LSTR MSG_RESET_VTOOLS = _UxGT("Reset V-tools"); - //LSTR MSG_COMMIT_VTOOL = _UxGT("Commit V-tool Mix"); - //LSTR MSG_VTOOLS_RESET = _UxGT("V-tools Were Reset"); - //LSTR MSG_START_Z = _UxGT("Start Z:"); - //LSTR MSG_END_Z = _UxGT(" End Z:"); LSTR MSG_GAMES = _UxGT("Gry"); - //LSTR MSG_BRICKOUT = _UxGT("Brickout"); - //LSTR MSG_INVADERS = _UxGT("Invaders"); - //LSTR MSG_SNAKE = _UxGT("Sn4k3"); - //LSTR MSG_MAZE = _UxGT("Maze"); - //LSTR MSG_BAD_PAGE = _UxGT("Bad page index"); - //LSTR MSG_BAD_PAGE_SPEED = _UxGT("Bad page speed"); LSTR MSG_EDIT_PASSWORD = _UxGT("Zmień hasło"); LSTR MSG_LOGIN_REQUIRED = _UxGT("Wymagane zalogowanie"); @@ -671,40 +538,18 @@ namespace Language_pl { #endif LSTR MSG_TMC_DRIVERS = _UxGT("Sterowniki TMC"); LSTR MSG_TMC_CURRENT = _UxGT("Prąd sterownika"); - //LSTR MSG_TMC_HYBRID_THRS = _UxGT("Hybrid Threshold"); LSTR MSG_TMC_HOMING_THRS = _UxGT("Zerowanie bezczujnikowe"); - //LSTR MSG_TMC_STEPPING_MODE = _UxGT("Stepping Mode"); - //LSTR MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop Enabled"); - //LSTR MSG_SERVICE_RESET = _UxGT("Reset"); - //LSTR MSG_SERVICE_IN = _UxGT(" in:"); - //LSTR MSG_BACKLASH = _UxGT("Backlash"); LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korekcja"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Wygładzanie"); LSTR MSG_LEVEL_X_AXIS = _UxGT("Wypoziomuj oś X"); LSTR MSG_AUTO_CALIBRATE = _UxGT("Autokalibracja"); - #if ENABLED(TOUCH_UI_FTDI_EVE) - //LSTR MSG_HEATER_TIMEOUT = _UxGT("Idle timeout, temperature decreased. Press Okay to reheat and again to resume."); - #else - //LSTR MSG_HEATER_TIMEOUT = _UxGT("Heater Timeout"); - #endif - //LSTR MSG_REHEAT = _UxGT("Reheat"); - //LSTR MSG_REHEATING = _UxGT("Reheating..."); - - //LSTR MSG_PROBE_WIZARD = _UxGT("Z Probe Wizard"); - //LSTR MSG_PROBE_WIZARD_PROBING = _UxGT("Probing Z Reference"); - //LSTR MSG_PROBE_WIZARD_MOVING = _UxGT("Moving to Probing Pos"); LSTR MSG_SOUND = _UxGT("Dźwięk"); - //LSTR MSG_TOP_LEFT = _UxGT("Top Left"); - //LSTR MSG_BOTTOM_LEFT = _UxGT("Bottom Left"); - //LSTR MSG_TOP_RIGHT = _UxGT("Top Right"); - //LSTR MSG_BOTTOM_RIGHT = _UxGT("Bottom Right"); LSTR MSG_CALIBRATION_COMPLETED = _UxGT("Kalibracja zakończona"); LSTR MSG_CALIBRATION_FAILED = _UxGT("Kalibracja nie powiodła się"); - //LSTR MSG_DRIVER_BACKWARD = _UxGT(" driver backward"); } #if FAN_COUNT == 1 diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h index f5ab03c44a..45e1879d4c 100644 --- a/Marlin/src/lcd/language/language_pt_br.h +++ b/Marlin/src/lcd/language/language_pt_br.h @@ -365,9 +365,6 @@ namespace Language_pt_br { LSTR MSG_ERR_MINTEMP = _UxGT("Erro:Temp Mínima"); LSTR MSG_HALTED = _UxGT("IMPRESSORA PAROU"); LSTR MSG_PLEASE_RESET = _UxGT("Favor resetar"); - LSTR MSG_SHORT_DAY = _UxGT("d"); - LSTR MSG_SHORT_HOUR = _UxGT("h"); - LSTR MSG_SHORT_MINUTE = _UxGT("m"); LSTR MSG_HEATING = _UxGT("Aquecendo..."); LSTR MSG_COOLING = _UxGT("Resfriando..."); LSTR MSG_BED_HEATING = _UxGT("Aquecendo mesa..."); diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h index 364a83fb3f..6db2fe38fa 100644 --- a/Marlin/src/lcd/language/language_ro.h +++ b/Marlin/src/lcd/language/language_ro.h @@ -36,7 +36,6 @@ namespace Language_ro { LSTR LANGUAGE = _UxGT("Romanian"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Pregatit."); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("DA"); LSTR MSG_NO = _UxGT("NU"); LSTR MSG_BACK = _UxGT("Inapoi"); @@ -449,9 +448,6 @@ namespace Language_ro { LSTR MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP"); LSTR MSG_HALTED = _UxGT("PRINTER HALTED"); LSTR MSG_PLEASE_RESET = _UxGT("Please Reset"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only - LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Heating..."); LSTR MSG_COOLING = _UxGT("Cooling..."); LSTR MSG_BED_HEATING = _UxGT("Bed Heating..."); @@ -618,12 +614,6 @@ namespace Language_ro { LSTR MSG_SERVICE_RESET = _UxGT("Reset"); LSTR MSG_SERVICE_IN = _UxGT(" in:"); LSTR MSG_BACKLASH = _UxGT("Backlash"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Corectare"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Smoothing"); diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h index 83fd5a3ac3..25ea5fd471 100644 --- a/Marlin/src/lcd/language/language_ru.h +++ b/Marlin/src/lcd/language/language_ru.h @@ -40,9 +40,9 @@ namespace Language_ru { LSTR MSG_NO = _UxGT("Нет"); LSTR MSG_BACK = _UxGT("Назад"); LSTR MSG_MEDIA_ABORTING = _UxGT("Прерывание..."); - LSTR MSG_MEDIA_INSERTED = _UxGT("SD-карта вставлена"); - LSTR MSG_MEDIA_REMOVED = _UxGT("SD-карта извлечена"); - LSTR MSG_MEDIA_WAITING = _UxGT("Вставьте SD-карту"); + LSTR MSG_MEDIA_INSERTED = _UxGT("SD карта вставлена"); + LSTR MSG_MEDIA_REMOVED = _UxGT("SD карта извлечена"); + LSTR MSG_MEDIA_WAITING = _UxGT("Вставьте SD карту"); #if LCD_WIDTH > 21 LSTR MSG_SD_INIT_FAIL = _UxGT("Сбой инициализации SD"); #else diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index 4fe67494e2..3a9eb23a8f 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -530,9 +530,6 @@ namespace Language_sk { LSTR MSG_ERR_MINTEMP = _UxGT("Chyba: MINTEMP"); LSTR MSG_HALTED = _UxGT("TLAČIAREŇ ZASTAVENÁ"); LSTR MSG_PLEASE_RESET = _UxGT("Reštartuje ju"); - LSTR MSG_SHORT_DAY = _UxGT("d"); - LSTR MSG_SHORT_HOUR = _UxGT("h"); - LSTR MSG_SHORT_MINUTE = _UxGT("m"); LSTR MSG_HEATING = _UxGT("Ohrev..."); LSTR MSG_COOLING = _UxGT("Ochladzovanie..."); LSTR MSG_BED_HEATING = _UxGT("Ohrev podložky..."); @@ -715,12 +712,6 @@ namespace Language_sk { LSTR MSG_SERVICE_RESET = _UxGT("Vynulovať"); LSTR MSG_SERVICE_IN = _UxGT("za:"); LSTR MSG_BACKLASH = _UxGT("Kompenz. vôle"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korekcia"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Vyhladzovanie"); diff --git a/Marlin/src/lcd/language/language_sv.h b/Marlin/src/lcd/language/language_sv.h index 9194dc4861..91a842fe2d 100644 --- a/Marlin/src/lcd/language/language_sv.h +++ b/Marlin/src/lcd/language/language_sv.h @@ -37,7 +37,6 @@ namespace Language_sv { LSTR LANGUAGE = _UxGT("Swedish"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" Redo."); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("JA"); LSTR MSG_NO = _UxGT("NEJ"); LSTR MSG_BACK = _UxGT("Bakåt"); @@ -483,9 +482,7 @@ namespace Language_sv { LSTR MSG_ERR_MINTEMP = _UxGT("Fel: MINTEMP"); LSTR MSG_HALTED = _UxGT("Utskrift stoppad"); LSTR MSG_PLEASE_RESET = _UxGT("Snälla Återställ"); - LSTR MSG_SHORT_DAY = _UxGT("d"); // One character only LSTR MSG_SHORT_HOUR = _UxGT("t"); // One character only - LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only LSTR MSG_HEATING = _UxGT("Värmer..."); LSTR MSG_COOLING = _UxGT("Kyler..."); LSTR MSG_BED_HEATING = _UxGT("Bädd Värmer..."); @@ -665,12 +662,6 @@ namespace Language_sv { LSTR MSG_SERVICE_RESET = _UxGT("Återställ"); LSTR MSG_SERVICE_IN = _UxGT(" in:"); LSTR MSG_BACKLASH = _UxGT("Backlash"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrigering"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Glättning"); diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index e56071405c..9525a952a1 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -41,7 +41,6 @@ namespace Language_tr { LSTR LANGUAGE = _UxGT("Turkish"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" hazır."); - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("EVET"); LSTR MSG_NO = _UxGT("HAYIR"); LSTR MSG_BACK = _UxGT("Geri"); @@ -583,12 +582,6 @@ namespace Language_tr { LSTR MSG_SERVICE_RESET = _UxGT("Resetle"); LSTR MSG_SERVICE_IN = _UxGT(" içinde:"); LSTR MSG_BACKLASH = _UxGT("Ters Tepki"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("Düzeltme"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Yumuşatma"); } diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 2d9dc725f9..60ffb27337 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -617,12 +617,6 @@ namespace Language_zh_CN { LSTR MSG_SERVICE_RESET = _UxGT("复位"); LSTR MSG_SERVICE_IN = _UxGT(" 在:"); LSTR MSG_BACKLASH = _UxGT("回差"); - LSTR MSG_BACKLASH_A = LCD_STR_A; - LSTR MSG_BACKLASH_B = LCD_STR_B; - LSTR MSG_BACKLASH_C = LCD_STR_C; - LSTR MSG_BACKLASH_I = LCD_STR_I; - LSTR MSG_BACKLASH_J = LCD_STR_J; - LSTR MSG_BACKLASH_K = LCD_STR_K; LSTR MSG_BACKLASH_CORRECTION = _UxGT("校正"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("平滑的"); diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index 42bb5be080..fd43fefd29 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -34,7 +34,6 @@ namespace Language_zh_TW { LSTR LANGUAGE = _UxGT("Traditional Chinese"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT("已就緒."); // " ready." - LSTR MSG_MARLIN = _UxGT("Marlin"); LSTR MSG_YES = _UxGT("是"); // "YES" LSTR MSG_NO = _UxGT("否"); // "NO" LSTR MSG_BACK = _UxGT("返回"); // "Back" diff --git a/buildroot/share/scripts/findMissingTranslations.sh b/buildroot/share/scripts/findMissingTranslations.sh index 6e605ceeba..24a2a910a2 100755 --- a/buildroot/share/scripts/findMissingTranslations.sh +++ b/buildroot/share/scripts/findMissingTranslations.sh @@ -31,6 +31,7 @@ fi echo "Missing strings for $TEST_LANGS..." for WORD in $(awk '/LSTR/{print $2}' language_en.h); do + [[ $WORD == "MSG_MARLIN" ]] && break LANG_LIST="" for LANG in $TEST_LANGS; do if [[ $(grep -c -E "^ *LSTR +$WORD\b" language_${LANG}.h) -eq 0 ]]; then